| 1 | APM version 1.2 available, flags 3.
|
|---|
| 2 | smp_acpi_probe: entry base 0x9fc00, limit 0xa0000
|
|---|
| 3 | smp_acpi_probe: entry base 0xf0000, limit 0x100000
|
|---|
| 4 | smp_acpi_probe: found ACPI RSDP signature at 0x000f7df0
|
|---|
| 5 | smp: using ACPI to detect MP configuration
|
|---|
| 6 | smp: found rsdp at 0x000f7df0 oem id: ASUS
|
|---|
| 7 | smp: rsdp points to rsdt at 0xbffd000
|
|---|
| 8 | smp: searching 2 entries for APIC information
|
|---|
| 9 | smp: skipping uninteresting header 'FACP'
|
|---|
| 10 | smp: skipping uninteresting header 'BOOT'
|
|---|
| 11 | smp_mp_probe: entry base 0x9fc00, limit 0xa0000
|
|---|
| 12 | smp_mp_probe: entry base 0xf0000, limit 0x100000
|
|---|
| 13 | VESA version = 2.0
|
|---|
| 14 | oem string: S3 Incorporated. 86C362
|
|---|
| 15 | 109: 132 x 25 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
|
|---|
| 16 | 10a: 132 x 43 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
|
|---|
| 17 | 12e: 320 x 200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 18 | 10d: 320 x 200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 19 | 10e: 320 x 200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 20 | 128: 320 x 200 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 21 | 10f: 320 x 200 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 22 | 131: 320 x 240 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 23 | 132: 320 x 240 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 24 | 133: 320 x 240 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 25 | 135: 320 x 240 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 26 | 134: 320 x 240 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 27 | 141: 400 x 300 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 28 | 142: 400 x 300 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 29 | 143: 400 x 300 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 30 | 145: 400 x 300 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 31 | 144: 400 x 300 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 32 | 151: 512 x 384 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 33 | 152: 512 x 384 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 34 | 153: 512 x 384 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 35 | 155: 512 x 384 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 36 | 154: 512 x 384 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 37 | 100: 640 x 400 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 38 | 11c: 640 x 400 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 39 | 11d: 640 x 400 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 40 | 129: 640 x 400 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 41 | 11e: 640 x 400 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 42 | 101: 640 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 43 | 110: 640 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 44 | 111: 640 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 45 | 12a: 640 x 480 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 46 | 112: 640 x 480 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 47 | 171: 720 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 48 | 172: 720 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 49 | 173: 720 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 50 | 17c: 720 x 576 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 51 | 17d: 720 x 576 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 52 | 17e: 720 x 576 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 53 | 102: 800 x 600 x 4 (a = 31, mem = 3, phy = 0, p = 4, b = 1)
|
|---|
| 54 | 103: 800 x 600 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 55 | 113: 800 x 600 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 56 | 114: 800 x 600 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 57 | 12b: 800 x 600 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 58 | 115: 800 x 600 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 59 | 104: 1024 x 768 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
|
|---|
| 60 | 105: 1024 x 768 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 61 | 116: 1024 x 768 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 62 | 117: 1024 x 768 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 63 | 12c: 1024 x 768 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 64 | 118: 1024 x 768 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 65 | 161: 1152 x 864 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 66 | 162: 1152 x 864 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 67 | 163: 1152 x 864 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 68 | 165: 1152 x 864 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 69 | 164: 1152 x 864 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 70 | 106: 1280 x 1024 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
|
|---|
| 71 | 107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 72 | 119: 1280 x 1024 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 73 | 11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 74 | 12d: 1280 x 1024 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 75 | 120: 1600 x 1200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 76 | 121: 1600 x 1200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 77 | 122: 1600 x 1200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 78 | VESA compatible graphics!
|
|---|
| 79 | EDID1: 4f
|
|---|
| 80 | EDID2: ebx 102
|
|---|
| 81 | EDID3: 4f
|
|---|
| 82 | Got EDID!
|
|---|
| 83 | Vendor: CTX
|
|---|
| 84 | Product ID: 22164
|
|---|
| 85 | Serial #: 0
|
|---|
| 86 | Produced in week/year: 0/1997
|
|---|
| 87 | EDID version: 1.1
|
|---|
| 88 | Type: Analog
|
|---|
| 89 | Size: 28 cm x 21 cm
|
|---|
| 90 | Gamma=2.1
|
|---|
| 91 | White (X,Y)=(0.281,0.31)
|
|---|
| 92 | Supported Future Video Modes:
|
|---|
| 93 | 640x480@120Hz (id=31793)
|
|---|
| 94 | 800x600@100Hz (id=26693)
|
|---|
| 95 | 1024x768@85Hz (id=22881)
|
|---|
| 96 | 1280x1024@60Hz (id=32897)
|
|---|
| 97 | Supported VESA Video Modes:
|
|---|
| 98 | 720x400@70
|
|---|
| 99 | 640x480@60
|
|---|
| 100 | 640x480x67
|
|---|
| 101 | 640x480x72
|
|---|
| 102 | 640x480x75
|
|---|
| 103 | 800x600@60
|
|---|
| 104 | 800x600@72
|
|---|
| 105 | 800x600@75
|
|---|
| 106 | 832x624@75
|
|---|
| 107 | 1024x768@60
|
|---|
| 108 | 1024x768@70
|
|---|
| 109 | 1024x768@75
|
|---|
| 110 | 1152x870@75
|
|---|
| 111 | Additional Video Mode:
|
|---|
| 112 | clock=25.17 MHz
|
|---|
| 113 | h: (640, 656, 752, 800)
|
|---|
| 114 | v: (350, 387, 389, 449)
|
|---|
| 115 | size: 27 cm x 20.2 cm
|
|---|
| 116 | border: 0 cm x 0 cm
|
|---|
| 117 | Additional Video Mode:
|
|---|
| 118 | clock=56.25 MHz
|
|---|
| 119 | h: (800, 832, 896, 1048)
|
|---|
| 120 | v: (600, 601, 604, 631)
|
|---|
| 121 | size: 27 cm x 20.2 cm
|
|---|
| 122 | border: 0 cm x 0 cm
|
|---|
| 123 | Additional Video Mode:
|
|---|
| 124 | clock=36 MHz
|
|---|
| 125 | h: (640, 672, 720, 832)
|
|---|
| 126 | v: (480, 481, 484, 509)
|
|---|
| 127 | size: 27 cm x 20.2 cm
|
|---|
| 128 | border: 0 cm x 0 cm
|
|---|
| 129 | Additional Video Mode:
|
|---|
| 130 | clock=94.5 MHz
|
|---|
| 131 | h: (1024, 1072, 1168, 1376)
|
|---|
| 132 | v: (768, 769, 772, 808)
|
|---|
| 133 | size: 27 cm x 20.2 cm
|
|---|
| 134 | border: 0 cm x 0 cm
|
|---|
| 135 | Welcome to the Haiku boot loader!
|
|---|
| 136 | number of drives: 2
|
|---|
| 137 | add_partitions_for(0x001053b8, mountFS = no)
|
|---|
| 138 | add_partitions_for(fd = 0, mountFS = no)
|
|---|
| 139 | 0x001055c4 Partition::Partition
|
|---|
| 140 | 0x001055c4 Partition::Scan()
|
|---|
| 141 | check for partitioning_system: Amiga Partition Map
|
|---|
| 142 | check for partitioning_system: EFI GUID Partition Map
|
|---|
| 143 | check for partitioning_system: Intel Partition Map
|
|---|
| 144 | intel: pm_identify_partition(1, 1070532: 0, 4327464960, 512)
|
|---|
| 145 | Partition::SetTo(): active: 80
|
|---|
| 146 | Partition::SetTo(): active: 0
|
|---|
| 147 | Partition::SetTo(): active: 0
|
|---|
| 148 | Partition::SetTo(): active: 0
|
|---|
| 149 | priority: 810
|
|---|
| 150 | check for partitioning_system: Intel Extended Partition
|
|---|
| 151 | check for partitioning_system: Apple Partition Map
|
|---|
| 152 | intel: pm_scan_partition(1, 1070532: 0, 4327464960, 512)
|
|---|
| 153 | 0x00105718 Partition::Partition
|
|---|
| 154 | 0x001055c4 Partition::AddChild 0x00105718
|
|---|
| 155 | 0x00105718 Partition::SetParent 0x001055c4
|
|---|
| 156 | new child partition!
|
|---|
| 157 | 0x001055c4 Partition::Scan: *** scan child 0x00105718 (start = 8225280, size = 4318272000, parent = 0x001055c4)!
|
|---|
| 158 | 0x00105718 Partition::Scan()
|
|---|
| 159 | check for partitioning_system: Amiga Partition Map
|
|---|
| 160 | check for partitioning_system: EFI GUID Partition Map
|
|---|
| 161 | check for partitioning_system: Intel Partition Map
|
|---|
| 162 | intel: pm_identify_partition(2, 1070872: 8225280, 4318272000, 512)
|
|---|
| 163 | Partition::SetTo(): active: c3
|
|---|
| 164 | Partition::CheckLocation() - end after session: 2534642281984 (session: 4318272000)
|
|---|
| 165 | intel: _ParsePrimary(): partition 0: bad location, ignoring
|
|---|
| 166 | Partition::SetTo(): active: ad
|
|---|
| 167 | Partition::CheckLocation() - end after session: 1140980562944 (session: 4318272000)
|
|---|
| 168 | intel: _ParsePrimary(): partition 1: bad location, ignoring
|
|---|
| 169 | Partition::SetTo(): active: 69
|
|---|
| 170 | Partition::CheckLocation() - end after session: 1939398313472 (session: 4318272000)
|
|---|
| 171 | intel: _ParsePrimary(): partition 2: bad location, ignoring
|
|---|
| 172 | Partition::SetTo(): active: 79
|
|---|
| 173 | Partition::CheckLocation() - end after session: 1244261457408 (session: 4318272000)
|
|---|
| 174 | intel: _ParsePrimary(): partition 3: bad location, ignoring
|
|---|
| 175 | priority: 100
|
|---|
| 176 | check for partitioning_system: Intel Extended Partition
|
|---|
| 177 | intel: ep_identify_partition(2, 8225280, 4318272000, 512)
|
|---|
| 178 | check for partitioning_system: Apple Partition Map
|
|---|
| 179 | 0x001055c4 Partition::~Partition
|
|---|
| 180 | 0x00105718 Partition::SetParent 0x00000000
|
|---|
| 181 | boot partition offset: 8225280
|
|---|
| 182 | 0x00105718 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 183 | load kernel...
|
|---|
| 184 | unhandled pheader type 0x6
|
|---|
| 185 | unhandled pheader type 0x3
|
|---|
| 186 | video mode: 1024x768x32
|
|---|
| 187 | kernel entry at 80032190
|
|---|
| 188 | Welcome to kernel debugger output!
|
|---|
| 189 | Haiku revision: 26087
|
|---|
| 190 | CPU 0: type 0 family 6 extended_family 0 model 6 extended_model 0 stepping 5, string 'GenuineIntel'
|
|---|
| 191 | CPU 0: features: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
|
|---|
| 192 | heap_attach: attached to 0x90b57000 - usable range 0x90b6c000 - 0x91b57000
|
|---|
| 193 | slab: init base 0x91b57000 + 0x2000
|
|---|
| 194 | initialize_commpage_syscall(): sysenter/sysexit supported
|
|---|
| 195 | allocate_commpage_entry(3, 5) -> 0xffff0100
|
|---|
| 196 | allocate_commpage_entry(2, 12) -> 0xffff0108
|
|---|
| 197 | apm_init()
|
|---|
| 198 | code32: 0xf000, 0x76e0, length 0x9259
|
|---|
| 199 | code16: 0xf000, length 0x4166
|
|---|
| 200 | data: 0xfdc7, length 0x6b97
|
|---|
| 201 | heap_attach: attached to 0x80300000 - usable range 0x80302000 - 0x80400000
|
|---|
| 202 | Could not register image "usb_disk": Bad argument type passed to function
|
|---|
| 203 | PCI: pci_module_init
|
|---|
| 204 | PCI: mechanism 1 controller found
|
|---|
| 205 | PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0008 to 0x000b
|
|---|
| 206 | PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7180, revision 03
|
|---|
| 207 | PCI: class_base 06, class_function 00, class_api 00
|
|---|
| 208 | PCI: vendor 8086: Intel Corporation
|
|---|
| 209 | PCI: device 7180: 440LX/EX - 82443LX/EX Host bridge
|
|---|
| 210 | PCI: info: Bridge (Host bridge)
|
|---|
| 211 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
|---|
| 212 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 213 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 214 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 215 | PCI: base reg 0: host e7800000, pci e7800000, size 00400000, flags 08
|
|---|
| 216 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 217 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 218 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 219 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 220 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 221 | PCI: Capabilities: AGP
|
|---|
| 222 | PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7181, revision 03
|
|---|
| 223 | PCI: class_base 06, class_function 04, class_api 00
|
|---|
| 224 | PCI: vendor 8086: Intel Corporation
|
|---|
| 225 | PCI: device 7181: 440LX/EX - 82443LX/EX AGP bridge
|
|---|
| 226 | PCI: info: Bridge (PCI bridge, Normal decode)
|
|---|
| 227 | PCI: line_size 00, latency 40, header_type 01, BIST 00
|
|---|
| 228 | PCI: subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 229 | PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 40
|
|---|
| 230 | PCI: io_base_upper_16 0000, io_base e0
|
|---|
| 231 | PCI: io_limit_upper_16 0000, io_limit d0
|
|---|
| 232 | PCI: memory_base e000, memory_limit e760
|
|---|
| 233 | PCI: prefetchable_memory_base_upper32 00000000, prefetchable_memory_base e770
|
|---|
| 234 | PCI: prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit e770
|
|---|
| 235 | PCI: bridge_control 000b, secondary_status 02a0
|
|---|
| 236 | PCI: interrupt_line 00, interrupt_pin 00
|
|---|
| 237 | PCI: ROM base host 00000000, pci 00000000, size ??
|
|---|
| 238 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 239 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 240 | PCI: Capabilities: (not supported)
|
|---|
| 241 | PCI: [dom 0, bus 1] bus 1, device 0, function 0: vendor 5333, device 8a13, revision 02
|
|---|
| 242 | PCI: class_base 03, class_function 00, class_api 00
|
|---|
| 243 | PCI: vendor 5333: S3 Inc.
|
|---|
| 244 | PCI: device 8a13: 86c368 [Trio 3D/2X] (Trio3D/2X)
|
|---|
| 245 | PCI: info: Display controller (VGA compatible controller, VGA controller)
|
|---|
| 246 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
|---|
| 247 | PCI: ROM base host e77f0000, pci e77f0000, size 00010000
|
|---|
| 248 | PCI: cardbus_CIS 00000000, subsystem_id 8a13, subsystem_vendor_id 5333
|
|---|
| 249 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 04, max_latency ff
|
|---|
| 250 | PCI: base reg 0: host e0000000, pci e0000000, size 04000000, flags 00
|
|---|
| 251 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 252 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 253 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 254 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 255 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 256 | PCI: Capabilities: PM, AGP
|
|---|
| 257 | PCI: [dom 0, bus 0] bus 0, device 4, function 0: vendor 8086, device 7110, revision 02
|
|---|
| 258 | PCI: class_base 06, class_function 01, class_api 00
|
|---|
| 259 | PCI: vendor 8086: Intel Corporation
|
|---|
| 260 | PCI: device 7110: 82371AB/EB/MB PIIX4 ISA
|
|---|
| 261 | PCI: info: Bridge (ISA bridge)
|
|---|
| 262 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 263 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 264 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 265 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 266 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 267 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 268 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 269 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 270 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 271 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 272 | PCI: Capabilities: (not supported)
|
|---|
| 273 | PCI: [dom 0, bus 0] bus 0, device 4, function 1: vendor 8086, device 7111, revision 01
|
|---|
| 274 | PCI: class_base 01, class_function 01, class_api 80
|
|---|
| 275 | PCI: vendor 8086: Intel Corporation
|
|---|
| 276 | PCI: device 7111: 82371AB/EB/MB PIIX4 IDE
|
|---|
| 277 | PCI: info: Mass storage controller (IDE interface)
|
|---|
| 278 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 279 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 280 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 281 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 282 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 283 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 284 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 285 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 286 | PCI: base reg 4: host 0000d800, pci 0000d800, size 00000010, flags 01
|
|---|
| 287 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 288 | PCI: Capabilities: (not supported)
|
|---|
| 289 | PCI: [dom 0, bus 0] bus 0, device 4, function 2: vendor 8086, device 7112, revision 01
|
|---|
| 290 | PCI: class_base 0c, class_function 03, class_api 00
|
|---|
| 291 | PCI: vendor 8086: Intel Corporation
|
|---|
| 292 | PCI: device 7112: 82371AB/EB/MB PIIX4 USB
|
|---|
| 293 | PCI: info: Serial bus controller (USB Controller, UHCI)
|
|---|
| 294 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 295 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 296 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 297 | PCI: interrupt_line 0a, interrupt_pin 04, min_grant 00, max_latency 00
|
|---|
| 298 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 299 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 300 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 301 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 302 | PCI: base reg 4: host 0000d400, pci 0000d400, size 00000020, flags 01
|
|---|
| 303 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 304 | PCI: Capabilities: (not supported)
|
|---|
| 305 | PCI: [dom 0, bus 0] bus 0, device 4, function 3: vendor 8086, device 7113, revision 02
|
|---|
| 306 | PCI: class_base 06, class_function 80, class_api 00
|
|---|
| 307 | PCI: vendor 8086: Intel Corporation
|
|---|
| 308 | PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI
|
|---|
| 309 | PCI: info: Bridge
|
|---|
| 310 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 311 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 312 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 313 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 314 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 315 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 316 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 317 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 318 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 319 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 320 | PCI: Capabilities: (not supported)
|
|---|
| 321 | PCI: [dom 0, bus 0] bus 0, device 10, function 0: vendor 10ec, device 8139, revision 10
|
|---|
| 322 | PCI: class_base 02, class_function 00, class_api 00
|
|---|
| 323 | PCI: vendor 10ec: Realtek Semiconductor Co., Ltd.
|
|---|
| 324 | PCI: device 8139: RTL-8139/8139C/8139C+ (RT8139)
|
|---|
| 325 | PCI: info: Network controller (Ethernet controller)
|
|---|
| 326 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 327 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 328 | PCI: cardbus_CIS 00000000, subsystem_id 8139, subsystem_vendor_id 10ec
|
|---|
| 329 | PCI: interrupt_line 0b, interrupt_pin 01, min_grant 20, max_latency 40
|
|---|
| 330 | PCI: base reg 0: host 0000d000, pci 0000d000, size 00000100, flags 01
|
|---|
| 331 | PCI: base reg 1: host df800000, pci df800000, size 00000100, flags 00
|
|---|
| 332 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 333 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 334 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 335 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 336 | PCI: Capabilities: PM
|
|---|
| 337 | usb_uhci: successfully started the controller
|
|---|
| 338 | usb_ohci: no devices found
|
|---|
| 339 | usb_ehci: no devices found
|
|---|
| 340 | usb_disk: device reports a lun count of 4
|
|---|
| 341 | usb_disk: vendor_identification "Generic "
|
|---|
| 342 | usb_disk: product_identification "USB SD Reader "
|
|---|
| 343 | usb_disk: product_revision_level "1.00"
|
|---|
| 344 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 345 | usb_disk: request_sense: key: 0x06; asc: 0x28; ascq: 0x00;
|
|---|
| 346 | usb_disk: request_sense: media changed
|
|---|
| 347 | usb_disk: vendor_identification "Generic "
|
|---|
| 348 | usb_disk: product_identification "USB CF Reader "
|
|---|
| 349 | usb_disk: product_revision_level "1.01"
|
|---|
| 350 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 351 | usb_disk: vendor_identification "Generic "
|
|---|
| 352 | usb_disk: product_identification "USB SM Reader "
|
|---|
| 353 | usb_disk: product_revision_level "1.02"
|
|---|
| 354 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 355 | usb_disk: vendor_identification "Generic "
|
|---|
| 356 | usb_disk: product_identification "USB MS Reader "
|
|---|
| 357 | usb_disk: product_revision_level "1.03"
|
|---|
| 358 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 359 | get_boot_partitions(): boot volume message:
|
|---|
| 360 | field: "booted from image", type: BOOL (0x424f4f4c):
|
|---|
| 361 | [ 0] false
|
|---|
| 362 | field: "partition offset", type: LLNG (0x4c4c4e47):
|
|---|
| 363 | [ 0] 8225280 (0x7d8200)
|
|---|
| 364 | field: "boot method", type: LONG (0x4c4f4e47):
|
|---|
| 365 | [ 0] 0 (0x0)
|
|---|
| 366 | field: "boot drive number", type: LLNG (0x4c4c4e47):
|
|---|
| 367 | [ 0] 128 (0x80)
|
|---|
| 368 | field: "disk identifier", type: RAWT (0x52415754):
|
|---|
| 369 | [ 0] data: "0x8070d678", 80 bytes
|
|---|
| 370 | get_boot_partitions(): boot method type: 0
|
|---|
| 371 | partitioning system: partitioning_systems/intel/extended/v1
|
|---|
| 372 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1)
|
|---|
| 373 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 374 | intel: ep_std_ops(0x1)
|
|---|
| 375 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 376 | intel: ep_std_ops(0x2)
|
|---|
| 377 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 378 | partitioning system: partitioning_systems/intel/map/v1
|
|---|
| 379 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1)
|
|---|
| 380 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1
|
|---|
| 381 | intel: pm_std_ops(0x1)
|
|---|
| 382 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0
|
|---|
| 383 | intel: pm_std_ops(0x2)
|
|---|
| 384 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 385 | file system: file_systems/bfs/v1
|
|---|
| 386 | KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1)
|
|---|
| 387 | KDiskSystem::Load(): file_systems/bfs/v1 -> 1
|
|---|
| 388 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 0
|
|---|
| 389 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 390 | file system: file_systems/devfs/v1
|
|---|
| 391 | KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1)
|
|---|
| 392 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 393 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 394 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 395 | file system: file_systems/rootfs/v1
|
|---|
| 396 | KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1)
|
|---|
| 397 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 398 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 399 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 400 | number of disk systems: 5
|
|---|
| 401 | KDiskDeviceManager::_Scan(/dev/disk)
|
|---|
| 402 | PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
|
|---|
| 403 | PCI-IDE: init channel...
|
|---|
| 404 | PCI-IDE: channel index 0
|
|---|
| 405 | PCI-IDE: bus master base 0xd800
|
|---|
| 406 | PCI-IDE: init channel done
|
|---|
| 407 | IDE: scan_device_worker: bus 0x90c0f100, device-number 0
|
|---|
| 408 | IDE: create_device: bus 0x90c0f100, device-number 0
|
|---|
| 409 | IDE: setup_device_links: bus 0x90c0f100, device 0x90bc7c00
|
|---|
| 410 | IDE: scan_device_int: device 0x90bc7c00, atapi 0
|
|---|
| 411 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 412 | IDE: scan_device_int: got a fast response
|
|---|
| 413 | IDE: scan_device_int: error bit set - no device or wrong type (status: 0x01)
|
|---|
| 414 | IDE: scan_device_int: device 0x90bc7c00, atapi 1
|
|---|
| 415 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 416 | IDE: scan_device_int: got a fast response
|
|---|
| 417 | IDE: scan_device_int: device found
|
|---|
| 418 | IDE: scan_device_worker: bus 0x90c0f100, device-number 1
|
|---|
| 419 | IDE: create_device: bus 0x90c0f100, device-number 1
|
|---|
| 420 | IDE: setup_device_links: bus 0x90c0f100, device 0x90c18000
|
|---|
| 421 | IDE: scan_device_int: device 0x90c18000, atapi 0
|
|---|
| 422 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 423 | IDE: scan_device_int: got a fast response
|
|---|
| 424 | IDE: scan_device_int: device found
|
|---|
| 425 | IDE: scan_device_worker: bus 0x90c0f100, device-number 0
|
|---|
| 426 | IDE: destroy_device: device 0x90bc7c00
|
|---|
| 427 | IDE: cleanup_device_links: device 0x90bc7c00
|
|---|
| 428 | IDE: create_device: bus 0x90c0f100, device-number 0
|
|---|
| 429 | IDE: setup_device_links: bus 0x90c0f100, device 0x90bc7c00
|
|---|
| 430 | IDE: scan_device_int: device 0x90bc7c00, atapi 0
|
|---|
| 431 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 432 | IDE: scan_device_int: got a fast response
|
|---|
| 433 | IDE: scan_device_int: error bit set - no device or wrong type (status: 0x01)
|
|---|
| 434 | IDE: scan_device_int: device 0x90bc7c00, atapi 1
|
|---|
| 435 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 436 | IDE: scan_device_int: got a fast response
|
|---|
| 437 | IDE: scan_device_int: device found
|
|---|
| 438 | IDE: scan_device_worker: bus 0x90c0f100, device-number 1
|
|---|
| 439 | IDE: destroy_device: device 0x90c18000
|
|---|
| 440 | IDE: cleanup_device_links: device 0x90c18000
|
|---|
| 441 | IDE: create_device: bus 0x90c0f100, device-number 1
|
|---|
| 442 | IDE: setup_device_links: bus 0x90c0f100, device 0x90c18000
|
|---|
| 443 | IDE: scan_device_int: device 0x90c18000, atapi 0
|
|---|
| 444 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 445 | IDE: scan_device_int: got a fast response
|
|---|
| 446 | IDE: scan_device_int: device found
|
|---|
| 447 | publish device: node 0x90c190c0, path disk/atapi/0/master/raw, module generic/block_io/device_v1
|
|---|
| 448 | publish device: node 0x90c192a0, path disk/ata/0/slave/raw, module generic/block_io/device_v1
|
|---|
| 449 | PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
|
|---|
| 450 | PCI-IDE: init channel...
|
|---|
| 451 | PCI-IDE: channel index 1
|
|---|
| 452 | PCI-IDE: bus master base 0xd808
|
|---|
| 453 | PCI-IDE: init channel done
|
|---|
| 454 | IDE: scan_device_worker: bus 0x90c0f300, device-number 0
|
|---|
| 455 | IDE: create_device: bus 0x90c0f300, device-number 0
|
|---|
| 456 | IDE: setup_device_links: bus 0x90c0f300, device 0x90c18400
|
|---|
| 457 | IDE: scan_device_int: device 0x90c18400, atapi 0
|
|---|
| 458 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 459 | IDE: scan_device_int: got a fast response
|
|---|
| 460 | IDE: scan_device_int: device found
|
|---|
| 461 | IDE: scan_device_worker: bus 0x90c0f300, device-number 1
|
|---|
| 462 | IDE: create_device: bus 0x90c0f300, device-number 1
|
|---|
| 463 | IDE: setup_device_links: bus 0x90c0f300, device 0x90c18800
|
|---|
| 464 | IDE: scan_device_int: device 0x90c18800, atapi 0
|
|---|
| 465 | IDE: scan_device_int: send_command failed
|
|---|
| 466 | IDE: scan_device_int: device 0x90c18800, atapi 1
|
|---|
| 467 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 468 | IDE: scan_device_int: no fast response to inquiry
|
|---|
| 469 | IDE: scan_device_int: status 0x00
|
|---|
| 470 | IDE: scan_device_int: busy bit not set after 100ms - probably noone there
|
|---|
| 471 | IDE: scan_device_int: aborting because busy bit not set
|
|---|
| 472 | IDE: destroy_device: device 0x90c18800
|
|---|
| 473 | IDE: cleanup_device_links: device 0x90c18800
|
|---|
| 474 | IDE: scan_device_worker: bus 0x90c0f300, device-number 0
|
|---|
| 475 | IDE: destroy_device: device 0x90c18400
|
|---|
| 476 | IDE: cleanup_device_links: device 0x90c18400
|
|---|
| 477 | IDE: create_device: bus 0x90c0f300, device-number 0
|
|---|
| 478 | IDE: setup_device_links: bus 0x90c0f300, device 0x90c18400
|
|---|
| 479 | IDE: scan_device_int: device 0x90c18400, atapi 0
|
|---|
| 480 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 481 | IDE: scan_device_int: got a fast response
|
|---|
| 482 | IDE: scan_device_int: device found
|
|---|
| 483 | IDE: scan_device_worker: bus 0x90c0f300, device-number 1
|
|---|
| 484 | IDE: create_device: bus 0x90c0f300, device-number 1
|
|---|
| 485 | IDE: setup_device_links: bus 0x90c0f300, device 0x90c18800
|
|---|
| 486 | IDE: scan_device_int: device 0x90c18800, atapi 0
|
|---|
| 487 | IDE: scan_device_int: send_command failed
|
|---|
| 488 | IDE: scan_device_int: device 0x90c18800, atapi 1
|
|---|
| 489 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 490 | IDE: scan_device_int: no fast response to inquiry
|
|---|
| 491 | IDE: scan_device_int: status 0x00
|
|---|
| 492 | IDE: scan_device_int: busy bit not set after 100ms - probably noone there
|
|---|
| 493 | IDE: scan_device_int: aborting because busy bit not set
|
|---|
| 494 | IDE: destroy_device: device 0x90c18800
|
|---|
| 495 | IDE: cleanup_device_links: device 0x90c18800
|
|---|
| 496 | publish device: node 0x90c19840, path disk/ata/1/master/raw, module generic/block_io/device_v1
|
|---|
| 497 | ahci: ahci_supports_device
|
|---|
| 498 | KDiskDeviceManager::_Scan(/dev/disk/ata)
|
|---|
| 499 | KDiskDeviceManager::_Scan(/dev/disk/ata/0)
|
|---|
| 500 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave)
|
|---|
| 501 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave/raw)
|
|---|
| 502 | found device: /dev/disk/ata/0/slave/raw
|
|---|
| 503 | KDiskDeviceManager::_Scan(/dev/disk/ata/1)
|
|---|
| 504 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/master)
|
|---|
| 505 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/master/raw)
|
|---|
| 506 | found device: /dev/disk/ata/1/master/raw
|
|---|
| 507 | KDiskDeviceManager::_Scan(/dev/disk/atapi)
|
|---|
| 508 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0)
|
|---|
| 509 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0/master)
|
|---|
| 510 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0/master/raw)
|
|---|
| 511 | found device: /dev/disk/atapi/0/master/raw
|
|---|
| 512 | KDiskDeviceManager::_Scan(/dev/disk/usb)
|
|---|
| 513 | KDiskDeviceManager::_Scan(/dev/disk/usb/0)
|
|---|
| 514 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/0)
|
|---|
| 515 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/0/raw)
|
|---|
| 516 | found device: /dev/disk/usb/0/0/raw
|
|---|
| 517 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/1)
|
|---|
| 518 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/1/raw)
|
|---|
| 519 | found device: /dev/disk/usb/0/1/raw
|
|---|
| 520 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 521 | usb_uhci: td (0x01972ba0) error: status: 0x394007ff; token: 0x00e90269;
|
|---|
| 522 | usb_uhci: td (0x01972be0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 523 | usb_uhci: td (0x01972c00) error: status: 0x394007ff; token: 0x01810269;
|
|---|
| 524 | usb_uhci: td (0x01972c40) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 525 | usb_uhci: td (0x01972c60) error: status: 0x394007ff; token: 0x01810269;
|
|---|
| 526 | usb_disk: receiving the command status wrapper failed
|
|---|
| 527 | usb_uhci: td (0x01972ce0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 528 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 529 | usb_disk: sending the command block wrapper failed
|
|---|
| 530 | usb_uhci: td (0x01972e20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 531 | usb_disk: failed to update capacity
|
|---|
| 532 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/2)
|
|---|
| 533 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/2/raw)
|
|---|
| 534 | found device: /dev/disk/usb/0/2/raw
|
|---|
| 535 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 536 | usb_disk: sending the command block wrapper failed
|
|---|
| 537 | usb_uhci: td (0x01972f60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 538 | usb_disk: sending the command block wrapper failed
|
|---|
| 539 | usb_uhci: td (0x01973060) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 540 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 541 | usb_disk: failed to update capacity
|
|---|
| 542 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/3)
|
|---|
| 543 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/3/raw)
|
|---|
| 544 | found device: /dev/disk/usb/0/3/raw
|
|---|
| 545 | usb_disk: sending the command block wrapper failed
|
|---|
| 546 | usb_uhci: td (0x019731a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 547 | usb_disk: sending the command block wrapper failed
|
|---|
| 548 | usb_uhci: td (0x019732a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 549 | usb_disk: sending the command block wrapper failed
|
|---|
| 550 | usb_uhci: td (0x019733a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 551 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 552 | usb_disk: failed to update capacity
|
|---|
| 553 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/0/slave/raw)
|
|---|
| 554 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 555 | intel: ep_std_ops(0x1)
|
|---|
| 556 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 557 | returned: -1
|
|---|
| 558 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 559 | intel: ep_std_ops(0x2)
|
|---|
| 560 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1
|
|---|
| 561 | intel: pm_std_ops(0x1)
|
|---|
| 562 | trying: partitioning_systems/intel/map/v1
|
|---|
| 563 | intel: pm_identify_partition(0, 0: 0, 4327464960, 512)
|
|---|
| 564 | Partition::SetTo(): active: 80
|
|---|
| 565 | Partition::SetTo(): active: 0
|
|---|
| 566 | Last message repeated 2 times.
|
|---|
| 567 | returned: 0.81
|
|---|
| 568 | KDiskSystem::Load(): file_systems/bfs/v1 -> 1
|
|---|
| 569 | trying: file_systems/bfs/v1
|
|---|
| 570 | returned: -2147483648
|
|---|
| 571 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 0
|
|---|
| 572 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 573 | trying: file_systems/devfs/v1
|
|---|
| 574 | returned: -1
|
|---|
| 575 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 576 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 577 | trying: file_systems/rootfs/v1
|
|---|
| 578 | returned: -1
|
|---|
| 579 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 580 | scanning with: partitioning_systems/intel/map/v1
|
|---|
| 581 | intel: pm_scan_partition(0, 0: 0, 4327464960, 512)
|
|---|
| 582 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 2
|
|---|
| 583 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/0/slave/0)
|
|---|
| 584 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 585 | intel: ep_std_ops(0x1)
|
|---|
| 586 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 587 | intel: ep_identify_partition(0, 8225280, 4318272000, 512)
|
|---|
| 588 | returned: -1
|
|---|
| 589 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 590 | intel: ep_std_ops(0x2)
|
|---|
| 591 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 3
|
|---|
| 592 | trying: partitioning_systems/intel/map/v1
|
|---|
| 593 | intel: pm_identify_partition(0, 7: 8225280, 4318272000, 512)
|
|---|
| 594 | Partition::SetTo(): active: c3
|
|---|
| 595 | Partition::CheckLocation() - end after session: 2534642281984 (session: 4318272000)
|
|---|
| 596 | intel: _ParsePrimary(): partition 0: bad location, ignoring
|
|---|
| 597 | Partition::SetTo(): active: ad
|
|---|
| 598 | Partition::CheckLocation() - end after session: 1140980562944 (session: 4318272000)
|
|---|
| 599 | intel: _ParsePrimary(): partition 1: bad location, ignoring
|
|---|
| 600 | Partition::SetTo(): active: 69
|
|---|
| 601 | Partition::CheckLocation() - end after session: 1939398313472 (session: 4318272000)
|
|---|
| 602 | intel: _ParsePrimary(): partition 2: bad location, ignoring
|
|---|
| 603 | Partition::SetTo(): active: 79
|
|---|
| 604 | Partition::CheckLocation() - end after session: 1244261457408 (session: 4318272000)
|
|---|
| 605 | intel: _ParsePrimary(): partition 3: bad location, ignoring
|
|---|
| 606 | returned: 0.1
|
|---|
| 607 | KDiskSystem::Load(): file_systems/bfs/v1 -> 1
|
|---|
| 608 | trying: file_systems/bfs/v1
|
|---|
| 609 | returned: 0.8
|
|---|
| 610 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 2
|
|---|
| 611 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 612 | trying: file_systems/devfs/v1
|
|---|
| 613 | returned: -1
|
|---|
| 614 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 615 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 616 | trying: file_systems/rootfs/v1
|
|---|
| 617 | returned: -1
|
|---|
| 618 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 619 | scanning with: file_systems/bfs/v1
|
|---|
| 620 | KDiskSystem::Load(): file_systems/bfs/v1 -> 2
|
|---|
| 621 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 1
|
|---|
| 622 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 1
|
|---|
| 623 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/1/master/raw)
|
|---|
| 624 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 625 | intel: ep_std_ops(0x1)
|
|---|
| 626 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 627 | returned: -1
|
|---|
| 628 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 629 | intel: ep_std_ops(0x2)
|
|---|
| 630 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 2
|
|---|
| 631 | trying: partitioning_systems/intel/map/v1
|
|---|
| 632 | intel: pm_identify_partition(0, 1: 0, 30738677760, 512)
|
|---|
| 633 | Partition::SetTo(): active: 80
|
|---|
| 634 | Partition::SetTo(): active: 0
|
|---|
| 635 | Last message repeated 2 times.
|
|---|
| 636 | returned: 0.81
|
|---|
| 637 | KDiskSystem::Load(): file_systems/bfs/v1 -> 2
|
|---|
| 638 | trying: file_systems/bfs/v1
|
|---|
| 639 | returned: -2147483648
|
|---|
| 640 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 1
|
|---|
| 641 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 642 | trying: file_systems/devfs/v1
|
|---|
| 643 | returned: -1
|
|---|
| 644 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 645 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 646 | trying: file_systems/rootfs/v1
|
|---|
| 647 | returned: -1
|
|---|
| 648 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 649 | scanning with: partitioning_systems/intel/map/v1
|
|---|
| 650 | intel: pm_scan_partition(0, 1: 0, 30738677760, 512)
|
|---|
| 651 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 3
|
|---|
| 652 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/1/master/0)
|
|---|
| 653 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 654 | intel: ep_std_ops(0x1)
|
|---|
| 655 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 656 | intel: ep_identify_partition(0, 8225280, 19469237760, 512)
|
|---|
| 657 | returned: -1
|
|---|
| 658 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 659 | intel: ep_std_ops(0x2)
|
|---|
| 660 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 4
|
|---|
| 661 | trying: partitioning_systems/intel/map/v1
|
|---|
| 662 | intel: pm_identify_partition(0, 8: 8225280, 19469237760, 512)
|
|---|
| 663 | Partition::SetTo(): active: c3
|
|---|
| 664 | Partition::CheckLocation() - end after session: 2534642281984 (session: 19469237760)
|
|---|
| 665 | intel: _ParsePrimary(): partition 0: bad location, ignoring
|
|---|
| 666 | Partition::SetTo(): active: ad
|
|---|
| 667 | Partition::CheckLocation() - end after session: 1140980562944 (session: 19469237760)
|
|---|
| 668 | intel: _ParsePrimary(): partition 1: bad location, ignoring
|
|---|
| 669 | Partition::SetTo(): active: 69
|
|---|
| 670 | Partition::CheckLocation() - end after session: 1939398313472 (session: 19469237760)
|
|---|
| 671 | intel: _ParsePrimary(): partition 2: bad location, ignoring
|
|---|
| 672 | Partition::SetTo(): active: 79
|
|---|
| 673 | Partition::CheckLocation() - end after session: 1244261457408 (session: 19469237760)
|
|---|
| 674 | intel: _ParsePrimary(): partition 3: bad location, ignoring
|
|---|
| 675 | returned: 0.1
|
|---|
| 676 | KDiskSystem::Load(): file_systems/bfs/v1 -> 2
|
|---|
| 677 | trying: file_systems/bfs/v1
|
|---|
| 678 | returned: 0.8
|
|---|
| 679 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 3
|
|---|
| 680 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 681 | trying: file_systems/devfs/v1
|
|---|
| 682 | returned: -1
|
|---|
| 683 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 684 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 685 | trying: file_systems/rootfs/v1
|
|---|
| 686 | returned: -1
|
|---|
| 687 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 688 | scanning with: file_systems/bfs/v1
|
|---|
| 689 | KDiskSystem::Load(): file_systems/bfs/v1 -> 3
|
|---|
| 690 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 2
|
|---|
| 691 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/1/master/1)
|
|---|
| 692 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 693 | intel: ep_std_ops(0x1)
|
|---|
| 694 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 695 | intel: ep_identify_partition(0, 19477463040, 11260408320, 512)
|
|---|
| 696 | returned: -1
|
|---|
| 697 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 698 | intel: ep_std_ops(0x2)
|
|---|
| 699 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 4
|
|---|
| 700 | trying: partitioning_systems/intel/map/v1
|
|---|
| 701 | intel: pm_identify_partition(0, 9: 19477463040, 11260408320, 512)
|
|---|
| 702 | Partition::SetTo(): active: 0
|
|---|
| 703 | Last message repeated 3 times.
|
|---|
| 704 | returned: 0.1
|
|---|
| 705 | KDiskSystem::Load(): file_systems/bfs/v1 -> 3
|
|---|
| 706 | trying: file_systems/bfs/v1
|
|---|
| 707 | returned: -2147483648
|
|---|
| 708 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 2
|
|---|
| 709 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 710 | trying: file_systems/devfs/v1
|
|---|
| 711 | returned: -1
|
|---|
| 712 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 713 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 714 | trying: file_systems/rootfs/v1
|
|---|
| 715 | returned: -1
|
|---|
| 716 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 717 | scanning with: partitioning_systems/intel/map/v1
|
|---|
| 718 | intel: pm_scan_partition(0, 9: 19477463040, 11260408320, 512)
|
|---|
| 719 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 5
|
|---|
| 720 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 4
|
|---|
| 721 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 3
|
|---|
| 722 | KDiskDeviceManager::_ScanPartition(/dev/disk/usb/0/0/raw)
|
|---|
| 723 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 724 | intel: ep_std_ops(0x1)
|
|---|
| 725 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 726 | returned: -1
|
|---|
| 727 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 728 | intel: ep_std_ops(0x2)
|
|---|
| 729 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 4
|
|---|
| 730 | trying: partitioning_systems/intel/map/v1
|
|---|
| 731 | intel: pm_identify_partition(0, 3: 0, 14909440, 512)
|
|---|
| 732 | usb_disk: sending the command block wrapper failed
|
|---|
| 733 | usb_uhci: td (0x019734e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 734 | usb_disk: read fails with 0xffffffff
|
|---|
| 735 | intel: _ReadPTS(): reading the PTS failed: ffffffff
|
|---|
| 736 | returned: -1
|
|---|
| 737 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 3
|
|---|
| 738 | KDiskSystem::Load(): file_systems/bfs/v1 -> 3
|
|---|
| 739 | trying: file_systems/bfs/v1
|
|---|
| 740 | usb_disk: sending the command block wrapper failed
|
|---|
| 741 | usb_uhci: td (0x019735e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 742 | usb_disk: read fails with 0xffffffff
|
|---|
| 743 | returned: -2147483648
|
|---|
| 744 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 2
|
|---|
| 745 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 746 | trying: file_systems/devfs/v1
|
|---|
| 747 | returned: -1
|
|---|
| 748 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 749 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 750 | trying: file_systems/rootfs/v1
|
|---|
| 751 | returned: -1
|
|---|
| 752 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 753 | device 0: /dev/disk/ata/0/slave/raw
|
|---|
| 754 | media status: No error
|
|---|
| 755 | device flags: 2
|
|---|
| 756 | offset: 0
|
|---|
| 757 | size: 4327464960 (4126.992 MB)
|
|---|
| 758 | content size: 4327464960
|
|---|
| 759 | block size: 512
|
|---|
| 760 | child count: 1
|
|---|
| 761 | index: -1
|
|---|
| 762 | status: 0
|
|---|
| 763 | flags: 5
|
|---|
| 764 | volume: -1
|
|---|
| 765 | disk system: partitioning_systems/intel/map/v1
|
|---|
| 766 | name: <NULL>
|
|---|
| 767 | content name: <NULL>
|
|---|
| 768 | type: <NULL>
|
|---|
| 769 | content type: Intel Partition Map
|
|---|
| 770 | params: <NULL>
|
|---|
| 771 | content params: <NULL>
|
|---|
| 772 | partition 7: /dev/disk/ata/0/slave/0
|
|---|
| 773 | offset: 8225280
|
|---|
| 774 | size: 4318272000 (4118.225 MB)
|
|---|
| 775 | content size: 4318271488
|
|---|
| 776 | block size: 1024
|
|---|
| 777 | child count: 0
|
|---|
| 778 | index: 0
|
|---|
| 779 | status: 0
|
|---|
| 780 | flags: 2
|
|---|
| 781 | volume: -1
|
|---|
| 782 | disk system: file_systems/bfs/v1
|
|---|
| 783 | name: <NULL>
|
|---|
| 784 | content name: Haiku
|
|---|
| 785 | type: BFS Filesystem
|
|---|
| 786 | content type: Be File System
|
|---|
| 787 | params: type = 235 ; active = 1
|
|---|
| 788 | content params: <NULL>
|
|---|
| 789 | device 1: /dev/disk/ata/1/master/raw
|
|---|
| 790 | media status: No error
|
|---|
| 791 | device flags: 2
|
|---|
| 792 | offset: 0
|
|---|
| 793 | size: 30738677760 (29314.687 MB)
|
|---|
| 794 | content size: 30738677760
|
|---|
| 795 | block size: 512
|
|---|
| 796 | child count: 2
|
|---|
| 797 | index: -1
|
|---|
| 798 | status: 0
|
|---|
| 799 | flags: 5
|
|---|
| 800 | volume: -1
|
|---|
| 801 | disk system: partitioning_systems/intel/map/v1
|
|---|
| 802 | name: <NULL>
|
|---|
| 803 | content name: <NULL>
|
|---|
| 804 | type: <NULL>
|
|---|
| 805 | content type: Intel Partition Map
|
|---|
| 806 | usb_disk: sending the command block wrapper failed
|
|---|
| 807 | params: <NULL>
|
|---|
| 808 | content params: <NULL>
|
|---|
| 809 | partition 8: /dev/disk/ata/1/master/0
|
|---|
| 810 | offset: 8225280
|
|---|
| 811 | usb_uhci: td (0x019736e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 812 | size: 19469237760 (18567.312 MB)
|
|---|
| 813 | content size: 19469234176
|
|---|
| 814 | block size: 4096
|
|---|
| 815 | child count: 0
|
|---|
| 816 | index: 0
|
|---|
| 817 | status: 0
|
|---|
| 818 | flags: 2
|
|---|
| 819 | volume: -1
|
|---|
| 820 | Media removed from /dev/disk/usb/0/0/raw
|
|---|
| 821 | disk system: file_systems/bfs/v1
|
|---|
| 822 | usb_disk: sending the command block wrapper failed
|
|---|
| 823 | name: <NULL>
|
|---|
| 824 | content name: Data
|
|---|
| 825 | type: BFS Filesystem
|
|---|
| 826 | content type: Be File System
|
|---|
| 827 | params: type = 235 ; active = 1
|
|---|
| 828 | usb_uhci: td (0x019737e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 829 | content params: <NULL>
|
|---|
| 830 | partition 9: /dev/disk/ata/1/master/1
|
|---|
| 831 | offset: 19477463040
|
|---|
| 832 | size: 11260408320 (10738.762 MB)
|
|---|
| 833 | content size: 11260408320
|
|---|
| 834 | block size: 512
|
|---|
| 835 | child count: 0
|
|---|
| 836 | index: 1
|
|---|
| 837 | status: 0
|
|---|
| 838 | flags: 4
|
|---|
| 839 | volume: -1
|
|---|
| 840 | disk system: partitioning_systems/intel/map/v1
|
|---|
| 841 | name: <NULL>
|
|---|
| 842 | content name: <NULL>
|
|---|
| 843 | type: FAT 32-bit, LBA-mapped
|
|---|
| 844 | content type: Intel Partition Map
|
|---|
| 845 | params: type = 12 ; active = 0
|
|---|
| 846 | content params: <NULL>
|
|---|
| 847 | device 2: /dev/disk/atapi/0/master/raw
|
|---|
| 848 | media status: No media present
|
|---|
| 849 | device flags: 5
|
|---|
| 850 | device 3: /dev/disk/usb/0/0/raw
|
|---|
| 851 | media status: General system error
|
|---|
| 852 | device flags: 5
|
|---|
| 853 | device 4: /dev/disk/usb/0/1/raw
|
|---|
| 854 | media status: General system error
|
|---|
| 855 | device flags: 5
|
|---|
| 856 | device 5: /dev/disk/usb/0/2/raw
|
|---|
| 857 | media status: Operation timed out
|
|---|
| 858 | device flags: 5
|
|---|
| 859 | device 6: /dev/disk/usb/0/3/raw
|
|---|
| 860 | media status: General system error
|
|---|
| 861 | device flags: 5
|
|---|
| 862 | bfs: mounted "Haiku" (root node at 131072, device = /dev/disk/ata/0/slave/0)
|
|---|
| 863 | module: Search for file_cache/launch_speedup/v1 failed.
|
|---|
| 864 | partitioning system: partitioning_systems/session/v1
|
|---|
| 865 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1)
|
|---|
| 866 | KDiskSystem::Load(): partitioning_systems/session/v1 -> 1
|
|---|
| 867 | KDiskSystem::Unload(): partitioning_systems/session/v1 -> 0
|
|---|
| 868 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 869 | file system: file_systems/fat/v1
|
|---|
| 870 | KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1)
|
|---|
| 871 | KDiskSystem::Load(): file_systems/fat/v1 -> 1
|
|---|
| 872 | KDiskSystem::Unload(): file_systems/fat/v1 -> 0
|
|---|
| 873 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 874 | file system: file_systems/iso9660/v1
|
|---|
| 875 | KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1)
|
|---|
| 876 | KDiskSystem::Load(): file_systems/iso9660/v1 -> 1
|
|---|
| 877 | KDiskSystem::Unload(): file_systems/iso9660/v1 -> 0
|
|---|
| 878 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 879 | KDiskDeviceManager::_Scan(/dev/disk)
|
|---|
| 880 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 881 | con_init: trying module console/frame_buffer/v1
|
|---|
| 882 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/console
|
|---|
| 883 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/dprintf
|
|---|
| 884 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/keyboard
|
|---|
| 885 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/null
|
|---|
| 886 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/random
|
|---|
| 887 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/tty
|
|---|
| 888 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/zero
|
|---|
| 889 | ahci: ahci_supports_device
|
|---|
| 890 | KDiskDeviceManager::_Scan(/dev/disk/ata)
|
|---|
| 891 | KDiskDeviceManager::_Scan(/dev/disk/ata/0)
|
|---|
| 892 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave)
|
|---|
| 893 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave/0)
|
|---|
| 894 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave/raw)
|
|---|
| 895 | KDiskDeviceManager::_Scan(/dev/disk/ata/1)
|
|---|
| 896 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/master)
|
|---|
| 897 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/master/0)
|
|---|
| 898 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/master/1)
|
|---|
| 899 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/master/raw)
|
|---|
| 900 | KDiskDeviceManager::_Scan(/dev/disk/atapi)
|
|---|
| 901 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0)
|
|---|
| 902 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0/master)
|
|---|
| 903 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0/master/raw)
|
|---|
| 904 | KDiskDeviceManager::_Scan(/dev/disk/floppy)
|
|---|
| 905 | config_manager: driver module: init
|
|---|
| 906 | driver_get_next_device_info(bus = 0, cookie = 0)
|
|---|
| 907 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/floppy/pc_floppy
|
|---|
| 908 | KDiskDeviceManager::_Scan(/dev/disk/scsi)
|
|---|
| 909 | devfs: "scsi_cd" api_version missing
|
|---|
| 910 | devfs: "scsi_cd" mandatory driver symbol(s) missing!
|
|---|
| 911 | devfs: "scsi_disk" api_version missing
|
|---|
| 912 | devfs: "scsi_disk" mandatory driver symbol(s) missing!
|
|---|
| 913 | KDiskDeviceManager::_Scan(/dev/disk/usb)
|
|---|
| 914 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/usb/usb_disk
|
|---|
| 915 | KDiskDeviceManager::_Scan(/dev/disk/usb/0)
|
|---|
| 916 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/0)
|
|---|
| 917 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/0/raw)
|
|---|
| 918 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/1)
|
|---|
| 919 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/1/raw)
|
|---|
| 920 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/2)
|
|---|
| 921 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/2/raw)
|
|---|
| 922 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/3)
|
|---|
| 923 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/3/raw)
|
|---|
| 924 | KDiskDeviceManager::_Scan(/dev/disk/virtual)
|
|---|
| 925 | nbd:>init_hardware()
|
|---|
| 926 | nbd:>init_driver()
|
|---|
| 927 | usb_disk: sending the command block wrapper failed
|
|---|
| 928 | usb_uhci: td (0x01973920) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 929 | allocate_commpage_entry(4, 34) -> 0xffff0118
|
|---|
| 930 | set_memory_write_back base 0 length bffd000
|
|---|
| 931 | find_nearest bffd000 0
|
|---|
| 932 | find_nearest 3ffd000 1
|
|---|
| 933 | find_nearest 1ffd000 2
|
|---|
| 934 | find_nearest ffd000 3
|
|---|
| 935 | find_nearest 7fd000 4
|
|---|
| 936 | find_nearest 3fd000 5
|
|---|
| 937 | find_nearest 4003000 1
|
|---|
| 938 | solutions: 0x8000000 0x4000000
|
|---|
| 939 | allocate MTRR slot 0, base = 0, length = 8000000, type=0x6
|
|---|
| 940 | allocate MTRR slot 1, base = 8000000, length = 4000000, type=0x6
|
|---|
| 941 | kernel debugger extension "debugger/hangman/v1": loaded
|
|---|
| 942 | kernel debugger extension "debugger/invalidate_on_exit/v1": loaded
|
|---|
| 943 | allocate MTRR slot 2, base = e0000000, length = 400000, type=0x1
|
|---|
| 944 | publish device: node 0x90cfe5a0, path disk/ata/1/master/raw, module generic/block_io/device_v1
|
|---|
| 945 | usb_disk: sending the command block wrapper failed
|
|---|
| 946 | usb_uhci: td (0x01973a20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 947 | usb_disk: sending the command block wrapper failed
|
|---|
| 948 | usb_uhci: td (0x01973b20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 949 | usb_disk: sending the command block wrapper failed
|
|---|
| 950 | usb_uhci: td (0x01973c20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 951 | usb_disk: sending the command block wrapper failed
|
|---|
| 952 | usb_uhci: td (0x01973d20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 953 | publish device: node 0x90cfe540, path disk/ata/0/slave/raw, module generic/block_io/device_v1
|
|---|
| 954 | publish device: node 0x90cfe240, path disk/atapi/0/master/raw, module generic/block_io/device_v1
|
|---|
| 955 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 956 | usb_disk: sending the command block wrapper failed
|
|---|
| 957 | usb_uhci: td (0x01973e60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 958 | usb_disk: sending the command block wrapper failed
|
|---|
| 959 | usb_uhci: td (0x01973f60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 960 | usb_disk: sending the command block wrapper failed
|
|---|
| 961 | usb_uhci: td (0x01974060) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 962 | usb_disk: sending the command block wrapper failed
|
|---|
| 963 | usb_uhci: td (0x01974160) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 964 | usb_disk: sending the command block wrapper failed
|
|---|
| 965 | usb_uhci: td (0x01974260) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 966 | usb_disk: sending the command block wrapper failed
|
|---|
| 967 | usb_uhci: td (0x01974360) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 968 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 969 | usb_disk: sending the command block wrapper failed
|
|---|
| 970 | usb_uhci: td (0x019744a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 971 | usb_disk: sending the command block wrapper failed
|
|---|
| 972 | usb_uhci: td (0x019745a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 973 | usb_disk: sending the command block wrapper failed
|
|---|
| 974 | usb_uhci: td (0x019746a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 975 | usb_disk: sending the command block wrapper failed
|
|---|
| 976 | usb_uhci: td (0x019747a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 977 | REG: Failed to open shadow passwd DB file "/etc/shadow": No such file or directory
|
|---|
| 978 | usb_disk: sending the command block wrapper failed
|
|---|
| 979 | usb_uhci: td (0x019748a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 980 | usb_disk: sending the command block wrapper failed
|
|---|
| 981 | usb_uhci: td (0x019749a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 982 | usb_disk: sending the command block wrapper failed
|
|---|
| 983 | usb_uhci: td (0x01974aa0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 984 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 985 | bfs: bfs_open_dir:1461: Invalid Argument
|
|---|
| 986 | register_domain(1, internet)
|
|---|
| 987 | unregister_domain(0x9120c480, 1, internet)
|
|---|
| 988 | register_domain(9, unix)
|
|---|
| 989 | unregister_domain(0x912220c0, 9, unix)
|
|---|
| 990 | usb_disk: sending the command block wrapper failed
|
|---|
| 991 | usb_uhci: td (0x01974be0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 992 | usb_disk: sending the command block wrapper failed
|
|---|
| 993 | usb_uhci: td (0x01974ce0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 994 | register_domain(1, internet)
|
|---|
| 995 | usb_disk: sending the command block wrapper failed
|
|---|
| 996 | usb_uhci: td (0x01974de0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 997 | usb_disk: sending the command block wrapper failed
|
|---|
| 998 | usb_uhci: td (0x01974ee0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 999 | get_device_interface: ask "network/devices/ethernet/v1" for loop
|
|---|
| 1000 | get_device_interface: ask "network/devices/loopback/v1" for loop
|
|---|
| 1001 | 3com: init_hardware(0x802e98b8)
|
|---|
| 1002 | 3com: no hardware found.
|
|---|
| 1003 | etherpci: init_driver init_driver: etherpci not found
|
|---|
| 1004 | ipro100: init_hardware(0x802e6e84)
|
|---|
| 1005 | ipro100: no hardware found.
|
|---|
| 1006 | ipro1000: init_hardware(0x80531724)
|
|---|
| 1007 | ipro1000: no hardware found.
|
|---|
| 1008 | marvell_yukon: init_hardware(0x802ecbbc)
|
|---|
| 1009 | marvell_yukon: no hardware found.
|
|---|
| 1010 | nforce: init_hardware(0x802e9c38)
|
|---|
| 1011 | nforce: no hardware found.
|
|---|
| 1012 | rtl8139: init_hardware(0x802e5e40)
|
|---|
| 1013 | [rtl8139] (rl) bus_alloc_resource(4, [16], 0x0, 0xffffffff, 0x1, 0x2)
|
|---|
| 1014 | rtl8139, found RealTek 8139 10/100BaseTX at 7
|
|---|
| 1015 | rtl8139: init_driver(0x802e5e40)
|
|---|
| 1016 | [rtl8139] (rl) bus_alloc_resource(4, [16], 0x0, 0xffffffff, 0x1, 0x2)
|
|---|
| 1017 | [rtl8139] (rl) bus_alloc_resource(4, [16], 0x0, 0xffffffff, 0x1, 0x2)
|
|---|
| 1018 | [rtl8139] (rl) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1, 0x6)
|
|---|
| 1019 | [rtl8139] () Found MII: rlphy
|
|---|
| 1020 | Adding entry for Ethernet 100baseTX <hw-loopback>
|
|---|
| 1021 | [rtl8139] () Adding entry for Ethernet 10baseT/UTP
|
|---|
| 1022 | 10baseTAdding entry for Ethernet 10baseT/UTP <full-duplex>
|
|---|
| 1023 | , 10baseT-FDXAdding entry for Ethernet 100baseTX
|
|---|
| 1024 | , 100baseTXAdding entry for Ethernet 100baseTX <full-duplex>
|
|---|
| 1025 | , 100baseTX-FDXAdding entry for Ethernet autoselect
|
|---|
| 1026 | , auto
|
|---|
| 1027 | ifmedia_set: target Ethernet autoselect
|
|---|
| 1028 | ifmedia_set: setting to Ethernet autoselect
|
|---|
| 1029 | if_initname(0x91230400, rl, 3)
|
|---|
| 1030 | [rtl8139] rtl8139: /dev/net/rtl8139/0
|
|---|
| 1031 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/rtl8139
|
|---|
| 1032 | syskonnect: init_hardware(0x805181d8)
|
|---|
| 1033 | syskonnect: no hardware found.
|
|---|
| 1034 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/usb_ecm
|
|---|
| 1035 | via_rhine: init_hardware(0x805121b8)
|
|---|
| 1036 | via_rhine: no hardware found.
|
|---|
| 1037 | bfs: bfs_open_dir:1461: Invalid Argument
|
|---|
| 1038 | get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/rtl8139/0
|
|---|
| 1039 | ipv4_datalink_init(/dev/net/rtl8139/0)
|
|---|
| 1040 | [net/rtl8139/0] compat_open(0x2)
|
|---|
| 1041 | ifmedia_ioctl: switching rl to Ethernet autoselect
|
|---|
| 1042 | /dev/net/rtl8139/0: media change, media 0x22 quality 1000 speed 10000
|
|---|
| 1043 | register_domain(4, link)
|
|---|
| 1044 | usb_disk: sending the command block wrapper failed
|
|---|
| 1045 | usb_uhci: td (0x01974fe0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1046 | usb_disk: sending the command block wrapper failed
|
|---|
| 1047 | usb_uhci: td (0x019750e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1048 | usb_disk: sending the command block wrapper failed
|
|---|
| 1049 | usb_uhci: td (0x019751e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1050 | usb_disk: sending the command block wrapper failed
|
|---|
| 1051 | usb_uhci: td (0x019752e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1052 | /dev/net/rtl8139/0: media change, media 0x900026 quality 1000 speed 10000
|
|---|
| 1053 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 1054 | usb_disk: sending the command block wrapper failed
|
|---|
| 1055 | usb_uhci: td (0x01975420) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1056 | usb_disk: sending the command block wrapper failed
|
|---|
| 1057 | usb_uhci: td (0x01975520) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1058 | usb_disk: sending the command block wrapper failed
|
|---|
| 1059 | usb_uhci: td (0x01975620) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1060 | intel_extreme: init_hardware()
|
|---|
| 1061 | Radeon - init_hardware: Version: 5.1.6.0
|
|---|
| 1062 | Radeon - Radeon_CardDetect: no supported devices found
|
|---|
| 1063 | S3: init_hardware() - device supported
|
|---|
| 1064 | S3: probe_devices() match found; name: graphics/5333_8A13_010000
|
|---|
| 1065 | S3: probe_devices() 1 supported devices
|
|---|
| 1066 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/graphics/s3
|
|---|
| 1067 | vesa: init_hardware()
|
|---|
| 1068 | vesa: init_driver()
|
|---|
| 1069 | vesa: publish_devices()
|
|---|
| 1070 | vesa: find_device()
|
|---|
| 1071 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/graphics/vesa
|
|---|
| 1072 | S3: open_hook() - name: graphics/5333_8A13_010000, cookie: 0x90cf6370)
|
|---|
| 1073 | S3: enter map_device()
|
|---|
| 1074 | allocate MTRR slot 3, base = e0000000, length = 800000, type=0x1
|
|---|
| 1075 | S3: Video memory, area: 2054, addr: 0x92800000, size: 8388608
|
|---|
| 1076 | S3: leave map_device(); result: 2054
|
|---|
| 1077 | S3: open_hook() returning 0x00000000
|
|---|
| 1078 | S3: Enter InitAccelerant()
|
|---|
| 1079 | S3: Vendor ID: 0x5333, Device ID: 0x8A13
|
|---|
| 1080 | S3: Virge_Init()
|
|---|
| 1081 | S3: usable memory: 4 MB, off-screen memory: 4 MB
|
|---|
| 1082 | S3: Detected current MCLK value of 100.227 MHz
|
|---|
| 1083 | DDC: ddc2_read(): DDC information read failure
|
|---|
| 1084 | Vendor: CTX
|
|---|
| 1085 | Product ID: 22164
|
|---|
| 1086 | Serial #: 0
|
|---|
| 1087 | Produced in week/year: 0/1997
|
|---|
| 1088 | EDID version: 1.1
|
|---|
| 1089 | Type: Analog
|
|---|
| 1090 | Size: 28 cm x 21 cm
|
|---|
| 1091 | Gamma=2.100
|
|---|
| 1092 | White (X,Y)=(0.281,0.311)
|
|---|
| 1093 | Supported Future Video Modes:
|
|---|
| 1094 | 640x480@120Hz (id=31793)
|
|---|
| 1095 | 800x600@100Hz (id=26693)
|
|---|
| 1096 | 1024x768@85Hz (id=22881)
|
|---|
| 1097 | 1280x1024@60Hz (id=32897)
|
|---|
| 1098 | Supported VESA Video Modes:
|
|---|
| 1099 | 720x400@70
|
|---|
| 1100 | 640x480@60
|
|---|
| 1101 | 640x480x67
|
|---|
| 1102 | 640x480x72
|
|---|
| 1103 | 640x480x75
|
|---|
| 1104 | 800x600@60
|
|---|
| 1105 | 800x600@72
|
|---|
| 1106 | 800x600@75
|
|---|
| 1107 | 832x624@75
|
|---|
| 1108 | 1024x768@60
|
|---|
| 1109 | 1024x768@70
|
|---|
| 1110 | 1024x768@75
|
|---|
| 1111 | 1152x870@75
|
|---|
| 1112 | Additional Video Mode:
|
|---|
| 1113 | clock=25.170000 MHz
|
|---|
| 1114 | usb_disk: sending the command block wrapper failed
|
|---|
| 1115 | h: (640, 656, 752, 800)
|
|---|
| 1116 | v: (350, 387, 389, 449)
|
|---|
| 1117 | size: 27.0 cm x 20.2 cm
|
|---|
| 1118 | border: 0.0 cm x 0.0 cm
|
|---|
| 1119 | Additional Video Mode:
|
|---|
| 1120 | clock=56.250000 MHz
|
|---|
| 1121 | usb_uhci: td (0x01975720) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1122 | h: (800, 832, 896, 1048)
|
|---|
| 1123 | usb_disk: sending the command block wrapper failed
|
|---|
| 1124 | v: (600, 601, 604, 631)
|
|---|
| 1125 | size: 27.0 cm x 20.2 cm
|
|---|
| 1126 | border: 0.0 cm x 0.0 cm
|
|---|
| 1127 | Additional Video Mode:
|
|---|
| 1128 | clock=36.000000 MHz
|
|---|
| 1129 | h: (640, 672, 720, 832)
|
|---|
| 1130 | v: (480, 481, 484, 509)
|
|---|
| 1131 | size: 27.0 cm x 20.2 cm
|
|---|
| 1132 | usb_uhci: td (0x01975820) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1133 | border: 0.0 cm x 0.0 cm
|
|---|
| 1134 | Additional Video Mode:
|
|---|
| 1135 | clock=94.500000 MHz
|
|---|
| 1136 | h: (1024, 1072, 1168, 1376)
|
|---|
| 1137 | v: (768, 769, 772, 808)
|
|---|
| 1138 | size: 27.0 cm x 20.2 cm
|
|---|
| 1139 | border: 0.0 cm x 0.0 cm
|
|---|
| 1140 | usb_disk: sending the command block wrapper failed
|
|---|
| 1141 | usb_uhci: td (0x01975920) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1142 | S3: Leave InitAccelerant(), result: 0x0
|
|---|
| 1143 | usb_disk: sending the command block wrapper failed
|
|---|
| 1144 | usb_uhci: td (0x01975a20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1145 | usb_disk: sending the command block wrapper failed
|
|---|
| 1146 | usb_uhci: td (0x01975b20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1147 | usb_disk: sending the command block wrapper failed
|
|---|
| 1148 | usb_uhci: td (0x01975c20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1149 | S3: GetEdidInfo()
|
|---|
| 1150 | S3: SetDisplayMode() begin
|
|---|
| 1151 | S3: Unsupported color space: 0x8
|
|---|
| 1152 | S3: SetDisplayMode() begin
|
|---|
| 1153 | S3: ProposeDisplayMode() clock: 94500, width: 1024, height: 768, space: 0x5
|
|---|
| 1154 | S3: Display Mode: width = 1024, height = 768, depth = 16
|
|---|
| 1155 | S3: Mode Timing = { 94500 1024 1072 1168 1376 768 769 772 808 0x60000000 }
|
|---|
| 1156 | S3: Virge_ModeInit(1024 x 768, 94500 KHz)
|
|---|
| 1157 | S3: InitCrtcTimingValues()
|
|---|
| 1158 | S3: Virge_WriteMode()
|
|---|
| 1159 | S3: SetDisplayMode() done
|
|---|
| 1160 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 1161 | usb_disk: sending the command block wrapper failed
|
|---|
| 1162 | usb_uhci: td (0x01975d60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1163 | usb_disk: sending the command block wrapper failed
|
|---|
| 1164 | usb_uhci: td (0x01975e60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1165 | usb_disk: sending the command block wrapper failed
|
|---|
| 1166 | usb_uhci: td (0x01975f60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1167 | usb_disk: sending the command block wrapper failed
|
|---|
| 1168 | usb_uhci: td (0x01976060) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1169 | usb_disk: sending the command block wrapper failed
|
|---|
| 1170 | usb_uhci: td (0x01976160) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1171 | ps2_hid: init_hardware
|
|---|
| 1172 | ps2_hid: init_driver
|
|---|
| 1173 | ps2_hid: publish_devices
|
|---|
| 1174 | ps2_hid: uninit_driver
|
|---|
| 1175 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/ps2_hid
|
|---|
| 1176 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/usb_hid
|
|---|
| 1177 | usb_disk: sending the command block wrapper failed
|
|---|
| 1178 | usb_uhci: td (0x01976260) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1179 | usb_disk: sending the command block wrapper failed
|
|---|
| 1180 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/wacom
|
|---|
| 1181 | usb_uhci: td (0x01976360) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1182 | usb_disk: sending the command block wrapper failed
|
|---|
| 1183 | usb_uhci: td (0x01976460) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1184 | usb_disk: sending the command block wrapper failed
|
|---|
| 1185 | usb_uhci: td (0x01976560) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1186 | emuxki: init_hardware()
|
|---|
| 1187 | ps2: devfs_publish_device input/mouse/ps2/0, status = 0x00000000
|
|---|
| 1188 | ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000
|
|---|
| 1189 | usb_disk: sending the command block wrapper failed
|
|---|
| 1190 | usb_uhci: td (0x01976660) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1191 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 1192 | usb_disk: sending the command block wrapper failed
|
|---|
| 1193 | usb_uhci: td (0x019767a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1194 | usb_disk: sending the command block wrapper failed
|
|---|
| 1195 | usb_uhci: td (0x019768a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1196 | ps2: probe_mouse reset failed
|
|---|
| 1197 | ps2: probing mouse input/mouse/ps2/0 failed
|
|---|
| 1198 | ps2: devfs_unpublish_device input/mouse/ps2/0, status = 0x00000000
|
|---|
| 1199 | ps2: keyboard found
|
|---|
| 1200 | bfs: bfs_open_dir:1461: Invalid Argument
|
|---|
| 1201 | usb_disk: sending the command block wrapper failed
|
|---|
| 1202 | usb_uhci: td (0x019769a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1203 | usb_disk: sending the command block wrapper failed
|
|---|
| 1204 | usb_uhci: td (0x01976aa0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1205 | usb_disk: sending the command block wrapper failed
|
|---|
| 1206 | usb_uhci: td (0x01976ba0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1207 | usb_disk: sending the command block wrapper failed
|
|---|
| 1208 | usb_uhci: td (0x01976ca0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1209 | cx23882: init_hardware()
|
|---|
| 1210 | usb_disk: sending the command block wrapper failed
|
|---|
| 1211 | usb_uhci: td (0x01976da0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1212 | auich: init_hardware()
|
|---|
| 1213 | auvia: init_hardware()
|
|---|
| 1214 | usb_disk: sending the command block wrapper failed
|
|---|
| 1215 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/audio/hmulti/emuxki
|
|---|
| 1216 | usb_uhci: td (0x01976ea0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1217 | usb_disk: sending the command block wrapper failed
|
|---|
| 1218 | usb_uhci: td (0x01976fa0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1219 | usb_disk: sending the command block wrapper failed
|
|---|
| 1220 | usb_uhci: td (0x019770a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1221 | usb_disk: sending the command block wrapper failed
|
|---|
| 1222 | usb_uhci: td (0x019771a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1223 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 1224 | usb_disk: sending the command block wrapper failed
|
|---|
| 1225 | usb_uhci: td (0x019772e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1226 | usb_disk: sending the command block wrapper failed
|
|---|
| 1227 | usb_uhci: td (0x019773e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1228 | ahci: ahci_supports_device
|
|---|
| 1229 | ahci: ahci_supports_device
|
|---|
| 1230 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/bus/usb_raw
|
|---|
| 1231 | usb_disk: sending the command block wrapper failed
|
|---|
| 1232 | usb_uhci: td (0x019774e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1233 | usb_disk: sending the command block wrapper failed
|
|---|
| 1234 | usb_uhci: td (0x019775e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1235 | usb_disk: sending the command block wrapper failed
|
|---|
| 1236 | usb_uhci: td (0x019776e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1237 | usb_disk: sending the command block wrapper failed
|
|---|
| 1238 | usb_uhci: td (0x019777e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1239 | bfs: bfs_create_index:1941: File or Directory already exists
|
|---|
| 1240 | usb_disk: sending the command block wrapper failed
|
|---|
| 1241 | usb_uhci: td (0x019778e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1242 | usb_disk: sending the command block wrapper failed
|
|---|
| 1243 | usb_uhci: td (0x019779e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1244 | usb_disk: sending the command block wrapper failed
|
|---|
| 1245 | usb_uhci: td (0x01977ae0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1246 | usb_disk: sending the command block wrapper failed
|
|---|
| 1247 | usb_uhci: td (0x01977be0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1248 | bfs: bfs_create_index:1941: File or Directory already exists
|
|---|
| 1249 | bfs: bfs_create_index:1941: File or Directory already exists
|
|---|
| 1250 | usb_disk: sending the command block wrapper failed
|
|---|
| 1251 | usb_uhci: td (0x01977ce0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1252 | usb_disk: sending the command block wrapper failed
|
|---|
| 1253 | usb_uhci: td (0x01977de0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1254 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 1255 | usb_disk: sending the command block wrapper failed
|
|---|
| 1256 | usb_uhci: td (0x01977f20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1257 | usb_disk: sending the command block wrapper failed
|
|---|
| 1258 | usb_uhci: td (0x01978020) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1259 | usb_disk: sending the command block wrapper failed
|
|---|
| 1260 | usb_uhci: td (0x01978120) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1261 | usb_disk: sending the command block wrapper failed
|
|---|
| 1262 | usb_uhci: td (0x01978220) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1263 | usb_disk: sending the command block wrapper failed
|
|---|
| 1264 | usb_uhci: td (0x01978320) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1265 | usb_disk: sending the command block wrapper failed
|
|---|
| 1266 | usb_uhci: td (0x01978420) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1267 | usb_disk: sending the command block wrapper failed
|
|---|
| 1268 | usb_uhci: td (0x01978520) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1269 | usb_disk: sending the command block wrapper failed
|
|---|
| 1270 | usb_uhci: td (0x01978620) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1271 | usb_disk: sending the command block wrapper failed
|
|---|
| 1272 | usb_uhci: td (0x01978720) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1273 | usb_disk: sending the command block wrapper failed
|
|---|
| 1274 | usb_uhci: td (0x01978820) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1275 | usb_disk: sending the command block wrapper failed
|
|---|
| 1276 | usb_uhci: td (0x01978920) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1277 | usb_disk: sending the command block wrapper failed
|
|---|
| 1278 | usb_uhci: td (0x01978a20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1279 | usb_disk: sending the command block wrapper failed
|
|---|
| 1280 | usb_uhci: td (0x01978b20) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1281 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 1282 | usb_disk: sending the command block wrapper failed
|
|---|
| 1283 | usb_uhci: td (0x01978c60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1284 | usb_disk: sending the command block wrapper failed
|
|---|
| 1285 | usb_uhci: td (0x01978d60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1286 | usb_disk: sending the command block wrapper failed
|
|---|
| 1287 | usb_uhci: td (0x01978e60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1288 | usb_disk: sending the command block wrapper failed
|
|---|
| 1289 | usb_uhci: td (0x01978f60) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1290 | usb_disk: sending the command block wrapper failed
|
|---|
| 1291 | usb_uhci: td (0x01979060) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1292 | usb_disk: sending the command block wrapper failed
|
|---|
| 1293 | usb_uhci: td (0x01979160) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1294 | usb_disk: sending the command block wrapper failed
|
|---|
| 1295 | usb_uhci: td (0x01979260) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1296 | usb_disk: sending the command block wrapper failed
|
|---|
| 1297 | usb_uhci: td (0x01979360) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1298 | usb_disk: sending the command block wrapper failed
|
|---|
| 1299 | usb_uhci: td (0x01979460) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1300 | usb_disk: sending the command block wrapper failed
|
|---|
| 1301 | usb_uhci: td (0x01979560) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1302 | usb_disk: sending the command block wrapper failed
|
|---|
| 1303 | usb_uhci: td (0x01979660) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1304 | usb_disk: sending the command block wrapper failed
|
|---|
| 1305 | usb_uhci: td (0x01979760) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1306 | usb_disk: sending the command block wrapper failed
|
|---|
| 1307 | usb_uhci: td (0x01979860) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1308 | usb_disk: sending the command block wrapper failed
|
|---|
| 1309 | usb_uhci: td (0x01979960) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1310 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 1311 | usb_disk: sending the command block wrapper failed
|
|---|
| 1312 | usb_uhci: td (0x01979aa0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1313 | usb_disk: sending the command block wrapper failed
|
|---|
| 1314 | usb_uhci: td (0x01979ba0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1315 | usb_disk: sending the command block wrapper failed
|
|---|
| 1316 | usb_uhci: td (0x01979ca0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1317 | usb_disk: sending the command block wrapper failed
|
|---|
| 1318 | usb_uhci: td (0x01979da0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1319 | usb_disk: sending the command block wrapper failed
|
|---|
| 1320 | usb_uhci: td (0x01979ea0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1321 | usb_disk: sending the command block wrapper failed
|
|---|
| 1322 | usb_uhci: td (0x01979fa0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1323 | usb_disk: sending the command block wrapper failed
|
|---|
| 1324 | usb_uhci: td (0x0197a0a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1325 | usb_disk: sending the command block wrapper failed
|
|---|
| 1326 | usb_uhci: td (0x0197a1a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1327 | usb_disk: sending the command block wrapper failed
|
|---|
| 1328 | usb_uhci: td (0x0197a2a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1329 | usb_disk: sending the command block wrapper failed
|
|---|
| 1330 | usb_uhci: td (0x0197a3a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1331 | usb_disk: sending the command block wrapper failed
|
|---|
| 1332 | usb_uhci: td (0x0197a4a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1333 | usb_disk: sending the command block wrapper failed
|
|---|
| 1334 | usb_uhci: td (0x0197a5a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1335 | usb_disk: sending the command block wrapper failed
|
|---|
| 1336 | usb_uhci: td (0x0197a6a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1337 | usb_disk: sending the command block wrapper failed
|
|---|
| 1338 | usb_uhci: td (0x0197a7a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1339 | usb_disk: sending the command block wrapper failed
|
|---|
| 1340 | usb_uhci: td (0x0197a8a0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1341 | usb_disk: acquire_sem failed while waiting for data transfer
|
|---|
| 1342 | usb_disk: sending the command block wrapper failed
|
|---|
| 1343 | usb_uhci: td (0x0197a9e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1344 | usb_disk: sending the command block wrapper failed
|
|---|
| 1345 | usb_uhci: td (0x0197aae0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1346 | usb_disk: sending the command block wrapper failed
|
|---|
| 1347 | usb_uhci: td (0x0197abe0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1348 | usb_disk: sending the command block wrapper failed
|
|---|
| 1349 | usb_uhci: td (0x0197ace0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1350 | usb_disk: sending the command block wrapper failed
|
|---|
| 1351 | usb_uhci: td (0x0197ade0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1352 | usb_disk: sending the command block wrapper failed
|
|---|
| 1353 | usb_uhci: td (0x0197aee0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1354 | usb_disk: sending the command block wrapper failed
|
|---|
| 1355 | usb_uhci: td (0x0197afe0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1356 | usb_disk: sending the command block wrapper failed
|
|---|
| 1357 | usb_uhci: td (0x0197b0e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1358 | usb_disk: sending the command block wrapper failed
|
|---|
| 1359 | usb_uhci: td (0x0197b1e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1360 | usb_disk: sending the command block wrapper failed
|
|---|
| 1361 | usb_uhci: td (0x0197b2e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1362 | usb_disk: sending the command block wrapper failed
|
|---|
| 1363 | usb_uhci: td (0x0197b3e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1364 | usb_disk: sending the command block wrapper failed
|
|---|
| 1365 | usb_uhci: td (0x0197b4e0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 1366 | usb_disk: sending the command block wrapper failed
|
|---|
