| 1 | options = 1
|
|---|
| 2 | APM version 1.2 available, flags 7.
|
|---|
| 3 | smp: using ACPI to detect MP configuration
|
|---|
| 4 | smp: local apic address is 0xfee00000
|
|---|
| 5 | smp: found local APIC with id 0
|
|---|
| 6 | smp: found local APIC with id 1
|
|---|
| 7 | smp: found io APIC with id 2 and address 0xfec00000
|
|---|
| 8 | VESA version = 3.0, capabilities 1
|
|---|
| 9 | OEM string: Matrox Graphics Inc.
|
|---|
| 10 | 0x101: 640 x 480 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1)
|
|---|
| 11 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 12 | 0x110: 640 x 480 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 13 | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 1
|
|---|
| 14 | 0x111: 640 x 480 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 15 | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 1
|
|---|
| 16 | 0x112: 640 x 480 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 17 | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 1
|
|---|
| 18 | 0x100: 640 x 400 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1)
|
|---|
| 19 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 20 | 0x102: 800 x 600 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
|
|---|
| 21 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 22 | 0x103: 800 x 600 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1)
|
|---|
| 23 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 24 | 0x113: 800 x 600 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 25 | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 1
|
|---|
| 26 | 0x114: 800 x 600 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 27 | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 1
|
|---|
| 28 | 0x115: 800 x 600 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 29 | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 1
|
|---|
| 30 | 0x105: 1024 x 768 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1)
|
|---|
| 31 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 32 | 0x116: 1024 x 768 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 33 | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 1
|
|---|
| 34 | 0x117: 1024 x 768 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 35 | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 1
|
|---|
| 36 | 0x118: 1024 x 768 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 37 | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 1
|
|---|
| 38 | 0x107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1)
|
|---|
| 39 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 40 | 0x119: 1280 x 1024 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 41 | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 1
|
|---|
| 42 | 0x11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 43 | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 1
|
|---|
| 44 | 0x11b: 1280 x 1024 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1)
|
|---|
| 45 | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 1
|
|---|
| 46 | 0x10a: 132 x 43 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
|
|---|
| 47 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 48 | Using mode 0x118
|
|---|
| 49 | VESA compatible graphics!
|
|---|
| 50 | EDID1: 4f
|
|---|
| 51 | EDID2: ebx 102
|
|---|
| 52 | EDID3: 4f
|
|---|
| 53 | Vendor: FUS
|
|---|
| 54 | Product ID: 1706
|
|---|
| 55 | Serial #: 37506
|
|---|
| 56 | Produced in week/year: 6/2009
|
|---|
| 57 | EDID version: 1.3
|
|---|
| 58 | Type: Analog
|
|---|
| 59 | Size: 34 cm x 27 cm
|
|---|
| 60 | Gamma=2.2
|
|---|
| 61 | White (X,Y)=(0.313,0.329)
|
|---|
| 62 | Supported Future Video Modes:
|
|---|
| 63 | 1280x1024@60Hz (id=32897)
|
|---|
| 64 | Supported VESA Video Modes:
|
|---|
| 65 | 720x400@70Hz
|
|---|
| 66 | 640x480@60Hz
|
|---|
| 67 | 640x480@75Hz
|
|---|
| 68 | 800x600@60Hz
|
|---|
| 69 | 800x600@75Hz
|
|---|
| 70 | 1024x768@60Hz
|
|---|
| 71 | 1024x768@75Hz
|
|---|
| 72 | 1280x1024@75Hz
|
|---|
| 73 | Additional Video Mode (1280x1024@60Hz):
|
|---|
| 74 | clock=108 MHz
|
|---|
| 75 | h: (1280, 1328, 1440, 1688)
|
|---|
| 76 | v: (1024, 1025, 1028, 1066)
|
|---|
| 77 | size: 33.8 cm x 27 cm
|
|---|
| 78 | border: 0 cm x 0 cm
|
|---|
| 79 | Horizontal frequency range = 30..82 kHz
|
|---|
| 80 | Vertical frequency range = 56..76 Hz
|
|---|
| 81 | Maximum pixel clock = 140 MHz
|
|---|
| 82 | Monitor Name: B17-5
|
|---|
| 83 | Serial Number: YE6L037506
|
|---|
| 84 | crtc: h 1328/1440/1688, v 1025/1028/1066, pixel clock 108000000, refresh 6064
|
|---|
| 85 | Welcome to the Haiku boot loader!
|
|---|
| 86 | number of drives: 2
|
|---|
| 87 | add_partitions_for(0x001053a0, mountFS = no)
|
|---|
| 88 | add_partitions_for(fd = 0, mountFS = no)
|
|---|
| 89 | 0x001055c8 Partition::Partition
|
|---|
| 90 | 0x001055c8 Partition::Scan()
|
|---|
| 91 | check for partitioning_system: GUID Partition Map
|
|---|
| 92 | check for partitioning_system: Intel Partition Map
|
|---|
| 93 | priority: 810
|
|---|
| 94 | check for partitioning_system: Intel Extended Partition
|
|---|
| 95 | 0x00105740 Partition::Partition
|
|---|
| 96 | 0x001055c8 Partition::AddChild 0x00105740
|
|---|
| 97 | 0x00105740 Partition::SetParent 0x001055c8
|
|---|
| 98 | new child partition!
|
|---|
| 99 | 0x00105800 Partition::Partition
|
|---|
| 100 | 0x001055c8 Partition::AddChild 0x00105800
|
|---|
| 101 | 0x00105800 Partition::SetParent 0x001055c8
|
|---|
| 102 | new child partition!
|
|---|
| 103 | 0x001058c0 Partition::Partition
|
|---|
| 104 | 0x001055c8 Partition::AddChild 0x001058c0
|
|---|
| 105 | 0x001058c0 Partition::SetParent 0x001055c8
|
|---|
| 106 | new child partition!
|
|---|
| 107 | 0x00105980 Partition::Partition
|
|---|
| 108 | 0x001055c8 Partition::AddChild 0x00105980
|
|---|
| 109 | 0x00105980 Partition::SetParent 0x001055c8
|
|---|
| 110 | new child partition!
|
|---|
| 111 | 0x001055c8 Partition::Scan(): scan child 0x00105740 (start = 32768, size = 42949
|
|---|
| 112 | 67296, parent = 0x001055c8)!
|
|---|
| 113 | 0x00105740 Partition::Scan()
|
|---|
| 114 | check for partitioning_system: GUID Partition Map
|
|---|
| 115 | check for partitioning_system: Intel Partition Map
|
|---|
| 116 | check for partitioning_system: Intel Extended Partition
|
|---|
| 117 | 0x001055c8 Partition::Scan(): scan child 0x00105800 (start = 4295000064, size =
|
|---|
| 118 | 4294967296, parent = 0x001055c8)!
|
|---|
| 119 | 0x00105800 Partition::Scan()
|
|---|
| 120 | check for partitioning_system: GUID Partition Map
|
|---|
| 121 | check for partitioning_system: Intel Partition Map
|
|---|
| 122 | check for partitioning_system: Intel Extended Partition
|
|---|
| 123 | 0x001055c8 Partition::Scan(): scan child 0x001058c0 (start = 8589967360, size =
|
|---|
| 124 | 4294967296, parent = 0x001055c8)!
|
|---|
| 125 | 0x001058c0 Partition::Scan()
|
|---|
| 126 | check for partitioning_system: GUID Partition Map
|
|---|
| 127 | check for partitioning_system: Intel Partition Map
|
|---|
| 128 | check for partitioning_system: Intel Extended Partition
|
|---|
| 129 | 0x001055c8 Partition::Scan(): scan child 0x00105980 (start = 12884934656, size =
|
|---|
| 130 | 17852936704, parent = 0x001055c8)!
|
|---|
| 131 | 0x00105980 Partition::Scan()
|
|---|
| 132 | check for partitioning_system: GUID Partition Map
|
|---|
| 133 | check for partitioning_system: Intel Partition Map
|
|---|
| 134 | check for partitioning_system: Intel Extended Partition
|
|---|
| 135 | 0x001055c8 Partition::~Partition
|
|---|
| 136 | 0x00105740 Partition::SetParent 0x00000000
|
|---|
| 137 | 0x00105800 Partition::SetParent 0x00000000
|
|---|
| 138 | 0x001058c0 Partition::SetParent 0x00000000
|
|---|
| 139 | 0x00105980 Partition::SetParent 0x00000000
|
|---|
| 140 | boot partition offset: 32768
|
|---|
| 141 | 0x00105740 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 142 | PackageVolumeInfo::SetTo()
|
|---|
| 143 | old state directory "state_2015-07-29_18:13:42"
|
|---|
| 144 | old state directory "state_2015-07-29_18:16:21"
|
|---|
| 145 | old state directory "state_2015-07-29_20:31:46"
|
|---|
| 146 | 0x00105800 Partition::Scan()
|
|---|
| 147 | check for partitioning_system: GUID Partition Map
|
|---|
| 148 | check for partitioning_system: Intel Partition Map
|
|---|
| 149 | priority: 500
|
|---|
| 150 | check for partitioning_system: Intel Extended Partition
|
|---|
| 151 | 0x00105800 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 152 | 0x001058c0 Partition::Scan()
|
|---|
| 153 | check for partitioning_system: GUID Partition Map
|
|---|
| 154 | check for partitioning_system: Intel Partition Map
|
|---|
| 155 | priority: 500
|
|---|
| 156 | check for partitioning_system: Intel Extended Partition
|
|---|
| 157 | 0x001058c0 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 158 | 0x00105980 Partition::Scan()
|
|---|
| 159 | check for partitioning_system: GUID Partition Map
|
|---|
| 160 | check for partitioning_system: Intel Partition Map
|
|---|
| 161 | check for partitioning_system: Intel Extended Partition
|
|---|
| 162 | 0x00105980 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 163 | add_partitions_for(0x00105460, mountFS = yes)
|
|---|
| 164 | add_partitions_for(fd = 6, mountFS = yes)
|
|---|
| 165 | 0x00106a50 Partition::Partition
|
|---|
| 166 | 0x00106a50 Partition::Scan()
|
|---|
| 167 | check for partitioning_system: GUID Partition Map
|
|---|
| 168 | check for partitioning_system: Intel Partition Map
|
|---|
| 169 | priority: 810
|
|---|
| 170 | check for partitioning_system: Intel Extended Partition
|
|---|
| 171 | 0x0010b4c0 Partition::Partition
|
|---|
| 172 | 0x00106a50 Partition::AddChild 0x0010b4c0
|
|---|
| 173 | 0x0010b4c0 Partition::SetParent 0x00106a50
|
|---|
| 174 | new child partition!
|
|---|
| 175 | 0x00107170 Partition::Partition
|
|---|
| 176 | 0x00106a50 Partition::AddChild 0x00107170
|
|---|
| 177 | 0x00107170 Partition::SetParent 0x00106a50
|
|---|
| 178 | new child partition!
|
|---|
| 179 | 0x00106a50 Partition::Scan(): scan child 0x0010b4c0 (start = 8225280, size = 214
|
|---|
| 180 | 6798080, parent = 0x00106a50)!
|
|---|
| 181 | 0x0010b4c0 Partition::Scan()
|
|---|
| 182 | check for partitioning_system: GUID Partition Map
|
|---|
| 183 | check for partitioning_system: Intel Partition Map
|
|---|
| 184 | check for partitioning_system: Intel Extended Partition
|
|---|
| 185 | 0x0010b4c0 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 186 | 0x0010b4c0 Partition::_Mount check for file_system: FAT32 Filesystem
|
|---|
| 187 | 0x00106a50 Partition::Scan(): scan child 0x00107170 (start = 2155023360, size =
|
|---|
| 188 | 31659102720, parent = 0x00106a50)!
|
|---|
| 189 | 0x00107170 Partition::Scan()
|
|---|
| 190 | check for partitioning_system: GUID Partition Map
|
|---|
| 191 | check for partitioning_system: Intel Partition Map
|
|---|
| 192 | check for partitioning_system: Intel Extended Partition
|
|---|
| 193 | 0x00107170 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 194 | 0x00106a50 Partition::~Partition
|
|---|
| 195 | 0x0010b4c0 Partition::SetParent 0x00000000
|
|---|
| 196 | 0x00107170 Partition::SetParent 0x00000000
|
|---|
| 197 | load kernel kernel_x86...
|
|---|
| 198 | video mode: 1280x1024x32
|
|---|
| 199 | maximum boot loader heap usage: 486512, currently used: 478984
|
|---|
| 200 | smp: found 2 cpus
|
|---|
| 201 | smp: apic_phys = 0xfee00000
|
|---|
| 202 | smp: ioapic_phys = 0xfec00000
|
|---|
| 203 | smp: apic (mapped) = 0x81a23000
|
|---|
| 204 | APIC ticks/sec = 66809334
|
|---|
| 205 | trampolining other cpus
|
|---|
| 206 | wait for delivery
|
|---|
| 207 | deassert INIT
|
|---|
| 208 | wait for delivery
|
|---|
| 209 | num startups = 2
|
|---|
| 210 | send STARTUP
|
|---|
| 211 | wait for delivery
|
|---|
| 212 | send STARTUP
|
|---|
| 213 | wait for delivery
|
|---|
| 214 | done trampolining
|
|---|
| 215 | kernel entry at 800633c8
|
|---|
| 216 | Welcome to kernel debugger output!
|
|---|
| 217 | Haiku revision: hrev49409
|
|---|
| 218 | reserve_io_interrupt_vectors: reserved 2 vectors starting from 98
|
|---|
| 219 | CPU 0: type 0 family 6 extended_family 0 model 6 extended_model 0 stepping 5, st
|
|---|
| 220 | ring 'GenuineIntel'
|
|---|
| 221 | No CPU topology information available.
|
|---|
| 222 | CPU 0: apic id 0, package 0, core 0, smt 0
|
|---|
| 223 | CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov p
|
|---|
| 224 | at pse36 mmx fxsr
|
|---|
| 225 | reserve_io_interrupt_vectors: reserved 16 vectors starting from 0
|
|---|
| 226 | using 32 bit paging (PAE not needed)
|
|---|
| 227 | mark_page_range_in_use(0x0, 0x100): start page is before free list
|
|---|
| 228 | mark_page_range_in_use(0x0, 0xa0): start page is before free list
|
|---|
| 229 | add_memory_type_range(4, 0x0, 0xa0000, 6)
|
|---|
| 230 | add_memory_type_range(5, 0xe0000, 0x20000, 6)
|
|---|
| 231 | add_memory_type_range(86, 0xd8000000, 0x500000, 0)
|
|---|
| 232 | mapping local apic at 0x81a23000
|
|---|
| 233 | add_memory_type_range(89, 0xfee00000, 0x1000, 0)
|
|---|
| 234 | CPU 1: type 0 family 6 extended_family 0 model 6 extended_model 0 stepping 5, st
|
|---|
| 235 | ring 'GenuineIntel'
|
|---|
| 236 | CPU 1: apic id 1, package 1, core 0, smt 0
|
|---|
| 237 | CPU 1: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov p
|
|---|
| 238 | at pse36 mmx fxsr
|
|---|
| 239 | setting up apic for CPU 0: apic id 0, version 262161
|
|---|
| 240 | CPU 0: logical apic id: 0x1
|
|---|
| 241 | x86_init_fpu: CPU has no SSE... just enabling FPU.
|
|---|
| 242 | reserve_io_interrupt_vectors: reserved 3 vectors starting from 221
|
|---|
| 243 | reserve_io_interrupt_vectors: reserved 1 vectors starting from 219
|
|---|
| 244 | arch_init_timer: using APIC timer.
|
|---|
| 245 | allocate_commpage_entry(2, 12) -> 0x00000100
|
|---|
| 246 | scheduler_init: found 2 logical cpus and 0 cache levels
|
|---|
| 247 | scheduler switches: single core: false, cpu load tracking: false, core load trac
|
|---|
| 248 | king: true
|
|---|
| 249 | scheduler: switching to low latency mode
|
|---|
| 250 | apm_init()
|
|---|
| 251 | code32: 0xf000, 0x8130, length 0x0
|
|---|
| 252 | code16: 0xf000, length 0x0
|
|---|
| 253 | data: 0xfdfa, length 0x0
|
|---|
| 254 | msi support enabled
|
|---|
| 255 | PCI: pci_module_init
|
|---|
| 256 | add_memory_type_range(95, 0x0, 0x1000, 0)
|
|---|
| 257 | remove_memory_type_range(95, 0x0, 0x1000, 0)
|
|---|
| 258 | add_memory_type_range(96, 0x9f000, 0x1000, 0)
|
|---|
| 259 | remove_memory_type_range(96, 0x9f000, 0x1000, 0)
|
|---|
| 260 | add_memory_type_range(97, 0xe0000, 0x20000, 0)
|
|---|
| 261 | add_memory_type_range(98, 0x27ff3000, 0x1000, 0)
|
|---|
| 262 | remove_memory_type_range(98, 0x27ff3000, 0x1000, 0)
|
|---|
| 263 | add_memory_type_range(99, 0x27ff3000, 0x1000, 0)
|
|---|
| 264 | remove_memory_type_range(97, 0xe0000, 0x20000, 0)
|
|---|
| 265 | add_memory_type_range(100, 0x27ff3000, 0x1000, 0)
|
|---|
| 266 | remove_memory_type_range(100, 0x27ff3000, 0x1000, 0)
|
|---|
| 267 | add_memory_type_range(101, 0x27ff5000, 0x1000, 0)
|
|---|
| 268 | remove_memory_type_range(101, 0x27ff5000, 0x1000, 0)
|
|---|
| 269 | PCI: mechanism 1 controller found
|
|---|
| 270 | PCI: FixupDevices: checking bus 1 behind 8086:7191
|
|---|
| 271 | PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0088 to 0x0
|
|---|
| 272 | 089
|
|---|
| 273 | PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7190,
|
|---|
| 274 | revision 03
|
|---|
| 275 | PCI: class_base 06, class_function 00, class_api 00
|
|---|
| 276 | PCI: vendor 8086: Intel Corporation
|
|---|
| 277 | PCI: device 7190: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
|
|---|
| 278 | PCI: info: Bridge (Host bridge)
|
|---|
| 279 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 280 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 281 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 282 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 283 | PCI: base reg 0: host d0000000, pci d0000000, size 04000000, flags 08
|
|---|
| 284 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 285 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 286 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 287 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 288 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 289 | PCI: Capabilities: AGP
|
|---|
| 290 | PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7191,
|
|---|
| 291 | revision 03
|
|---|
| 292 | PCI: class_base 06, class_function 04, class_api 00
|
|---|
| 293 | PCI: vendor 8086: Intel Corporation
|
|---|
| 294 | PCI: device 7191: 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
|
|---|
| 295 | PCI: info: Bridge (PCI bridge, Normal decode)
|
|---|
| 296 | PCI: line_size 00, latency 40, header_type 01, BIST 00
|
|---|
| 297 | PCI: subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 298 | PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 2
|
|---|
| 299 | 0
|
|---|
| 300 | PCI: I/O window f000-0fff
|
|---|
| 301 | PCI: memory window d4000000-d7ffffff
|
|---|
| 302 | PCI: prefetchable memory window 00000000d8000000-00000000d9ffffff
|
|---|
| 303 | PCI: bridge_control 0089, secondary_status 02a0
|
|---|
| 304 | PCI: interrupt_line 00, interrupt_pin 00
|
|---|
| 305 | PCI: ROM base host 00000000, pci 00000000, size ??
|
|---|
| 306 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 307 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 308 | PCI: Capabilities: (not supported)
|
|---|
| 309 | PCI: [dom 0, bus 1] bus 1, device 0, function 0: vendor 102b, device 0525,
|
|---|
| 310 | revision 03
|
|---|
| 311 | PCI: class_base 03, class_function 00, class_api 00
|
|---|
| 312 | PCI: vendor 102b: Matrox Electronics Systems Ltd.
|
|---|
| 313 | PCI: device 0525: MGA G400/G450 (Millennium G400 32Mb SGRAM)
|
|---|
| 314 | PCI: info: Display controller (VGA compatible controller, VGA controller)
|
|---|
| 315 | PCI: line_size 08, latency 20, header_type 00, BIST 00
|
|---|
| 316 | PCI: ROM base host 00000000, pci 00000000, size 00010000
|
|---|
| 317 | PCI: cardbus_CIS 00000000, subsystem_id 19f8, subsystem_vendor_id 102b
|
|---|
| 318 | PCI: interrupt_line 0a, interrupt_pin 01, min_grant 10, max_latency 20
|
|---|
| 319 | PCI: base reg 0: host d8000000, pci d8000000, size 02000000, flags 08
|
|---|
| 320 | PCI: base reg 1: host d4000000, pci d4000000, size 00004000, flags 00
|
|---|
| 321 | PCI: base reg 2: host d5000000, pci d5000000, size 00800000, flags 00
|
|---|
| 322 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 323 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 324 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 325 | PCI: Capabilities: PM, AGP
|
|---|
| 326 | PCI: [dom 0, bus 0] bus 0, device 7, function 0: vendor 8086, device 7110,
|
|---|
| 327 | revision 02
|
|---|
| 328 | PCI: class_base 06, class_function 01, class_api 00
|
|---|
| 329 | PCI: vendor 8086: Intel Corporation
|
|---|
| 330 | PCI: device 7110: 82371AB/EB/MB PIIX4 ISA
|
|---|
| 331 | PCI: info: Bridge (ISA bridge)
|
|---|
| 332 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 333 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 334 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 335 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 336 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 337 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 338 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 339 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 340 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 341 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 342 | PCI: Capabilities: (not supported)
|
|---|
| 343 | PCI: [dom 0, bus 0] bus 0, device 7, function 1: vendor 8086, device 7111,
|
|---|
| 344 | revision 01
|
|---|
| 345 | PCI: class_base 01, class_function 01, class_api 80
|
|---|
| 346 | PCI: vendor 8086: Intel Corporation
|
|---|
| 347 | PCI: device 7111: 82371AB/EB/MB PIIX4 IDE
|
|---|
| 348 | PCI: info: Mass storage controller (IDE interface)
|
|---|
| 349 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 350 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 351 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 352 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 353 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 354 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 355 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 356 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 357 | PCI: base reg 4: host 0000f000, pci 0000f000, size 00000010, flags 01
|
|---|
| 358 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 359 | PCI: Capabilities: (not supported)
|
|---|
| 360 | PCI: [dom 0, bus 0] bus 0, device 7, function 2: vendor 8086, device 7112,
|
|---|
| 361 | revision 01
|
|---|
| 362 | PCI: class_base 0c, class_function 03, class_api 00
|
|---|
| 363 | PCI: vendor 8086: Intel Corporation
|
|---|
| 364 | PCI: device 7112: 82371AB/EB/MB PIIX4 USB
|
|---|
| 365 | PCI: info: Serial bus controller (USB controller, UHCI)
|
|---|
| 366 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 367 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 368 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 369 | PCI: interrupt_line 0c, interrupt_pin 04, min_grant 00, max_latency 00
|
|---|
| 370 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 371 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 372 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 373 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 374 | PCI: base reg 4: host 00009000, pci 00009000, size 00000020, flags 01
|
|---|
| 375 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 376 | PCI: Capabilities: (not supported)
|
|---|
| 377 | PCI: [dom 0, bus 0] bus 0, device 7, function 3: vendor 8086, device 7113,
|
|---|
| 378 | revision 02
|
|---|
| 379 | PCI: class_base 06, class_function 80, class_api 00
|
|---|
| 380 | PCI: vendor 8086: Intel Corporation
|
|---|
| 381 | PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI
|
|---|
| 382 | PCI: info: Bridge
|
|---|
| 383 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 384 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 385 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 386 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 387 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 388 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 389 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 390 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 391 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 392 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 393 | PCI: Capabilities: (not supported)
|
|---|
| 394 | PCI: [dom 0, bus 0] bus 0, device 9, function 0: vendor 10ec, device 8139,
|
|---|
| 395 | revision 10
|
|---|
| 396 | PCI: class_base 02, class_function 00, class_api 00
|
|---|
| 397 | PCI: vendor 10ec: Realtek Semiconductor Co., Ltd.
|
|---|
| 398 | PCI: device 8139: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (RTL-8100/8101
|
|---|
| 399 | L/8139 PCI Fast Ethernet Adapter)
|
|---|
| 400 | PCI: info: Network controller (Ethernet controller)
|
|---|
| 401 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 402 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 403 | PCI: cardbus_CIS 00000000, subsystem_id 8139, subsystem_vendor_id 10ec
|
|---|
| 404 | PCI: interrupt_line 0c, interrupt_pin 01, min_grant 20, max_latency 40
|
|---|
| 405 | PCI: base reg 0: host 00009400, pci 00009400, size 00000100, flags 01
|
|---|
| 406 | PCI: base reg 1: host db000000, pci db000000, size 00000100, flags 00
|
|---|
| 407 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 408 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 409 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 410 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 411 | PCI: Capabilities: (not supported)
|
|---|
| 412 | PCI: [dom 0, bus 0] bus 0, device 15, function 0: vendor 125d, device 1969,
|
|---|
| 413 | revision 02
|
|---|
| 414 | PCI: class_base 04, class_function 01, class_api 00
|
|---|
| 415 | PCI: vendor 125d: ESS Technology
|
|---|
| 416 | PCI: device 1969: ES1938/ES1946/ES1969 Solo-1 Audiodrive
|
|---|
| 417 | PCI: info: Multimedia controller (Multimedia audio controller)
|
|---|
| 418 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 419 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 420 | PCI: cardbus_CIS 00000000, subsystem_id 8898, subsystem_vendor_id 125d
|
|---|
| 421 | PCI: interrupt_line 0a, interrupt_pin 01, min_grant 02, max_latency 18
|
|---|
| 422 | PCI: base reg 0: host 00009800, pci 00009800, size 00000040, flags 01
|
|---|
| 423 | PCI: base reg 1: host 00009c00, pci 00009c00, size 00000010, flags 01
|
|---|
| 424 | PCI: base reg 2: host 0000a000, pci 0000a000, size 00000010, flags 01
|
|---|
| 425 | PCI: base reg 3: host 0000a400, pci 0000a400, size 00000004, flags 01
|
|---|
| 426 | PCI: base reg 4: host 0000a800, pci 0000a800, size 00000004, flags 01
|
|---|
| 427 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 428 | PCI: Capabilities: PM
|
|---|
| 429 | PCI: [dom 0, bus 0] bus 0, device 19, function 0: vendor 1103, device 0004,
|
|---|
| 430 | revision 01
|
|---|
| 431 | PCI: class_base 01, class_function 80, class_api 00
|
|---|
| 432 | PCI: vendor 1103: HighPoint Technologies, Inc.
|
|---|
| 433 | PCI: device 0004: HPT366/368/370/370A/372/372N
|
|---|
| 434 | PCI: info: Mass storage controller
|
|---|
| 435 | PCI: line_size 08, latency f8, header_type 80, BIST 00
|
|---|
| 436 | PCI: ROM base host 00000000, pci 00000000, size 00020000
|
|---|
| 437 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 438 | PCI: interrupt_line 0b, interrupt_pin 01, min_grant 08, max_latency 08
|
|---|
| 439 | PCI: base reg 0: host 0000ac00, pci 0000ac00, size 00000008, flags 01
|
|---|
| 440 | PCI: base reg 1: host 0000b000, pci 0000b000, size 00000004, flags 01
|
|---|
| 441 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 442 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 443 | PCI: base reg 4: host 0000b400, pci 0000b400, size 00000100, flags 01
|
|---|
| 444 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 445 | PCI: Capabilities: (not supported)
|
|---|
| 446 | PCI: [dom 0, bus 0] bus 0, device 19, function 1: vendor 1103, device 0004,
|
|---|
| 447 | revision 01
|
|---|
| 448 | PCI: class_base 01, class_function 80, class_api 00
|
|---|
| 449 | PCI: vendor 1103: HighPoint Technologies, Inc.
|
|---|
| 450 | PCI: device 0004: HPT366/368/370/370A/372/372N
|
|---|
| 451 | PCI: info: Mass storage controller
|
|---|
| 452 | PCI: line_size 08, latency f8, header_type 80, BIST 00
|
|---|
| 453 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 454 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 455 | PCI: interrupt_line 0b, interrupt_pin 02, min_grant 08, max_latency 08
|
|---|
| 456 | PCI: base reg 0: host 0000b800, pci 0000b800, size 00000008, flags 01
|
|---|
| 457 | PCI: base reg 1: host 0000bc00, pci 0000bc00, size 00000004, flags 01
|
|---|
| 458 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 459 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 460 | PCI: base reg 4: host 0000c000, pci 0000c000, size 00000100, flags 01
|
|---|
| 461 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 462 | PCI: Capabilities: (not supported)
|
|---|
| 463 | add_memory_type_range(103, 0x0, 0x1000, 0)
|
|---|
| 464 | remove_memory_type_range(103, 0x0, 0x1000, 0)
|
|---|
| 465 | add_memory_type_range(104, 0xe0000, 0x20000, 0)
|
|---|
| 466 | remove_memory_type_range(104, 0xe0000, 0x20000, 0)
|
|---|
| 467 | add_memory_type_range(105, 0xf7000, 0x1000, 0)
|
|---|
| 468 | ACPI: RSDP 0x000F7370 000014 (v00 ABIT )
|
|---|
| 469 | remove_memory_type_range(105, 0xf7000, 0x1000, 0)
|
|---|
| 470 | add_memory_type_range(106, 0x27ff3000, 0x1000, 0)
|
|---|
| 471 | ACPI: RSDT 0x27FF3000 00002C (v01 ABIT AWRDACPI 42302E31 AWRD 00000000)
|
|---|
| 472 | remove_memory_type_range(106, 0x27ff3000, 0x1000, 0)
|
|---|
| 473 | add_memory_type_range(107, 0x27ff3000, 0x1000, 0)
|
|---|
| 474 | add_memory_type_range(108, 0x27ff3000, 0x1000, 0)
|
|---|
| 475 | remove_memory_type_range(108, 0x27ff3000, 0x1000, 0)
|
|---|
| 476 | add_memory_type_range(109, 0x27ff3000, 0x1000, 0)
|
|---|
| 477 | ACPI: FACP 0x27FF3040 000074 (v01 ABIT AWRDACPI 42302E31 AWRD 00000000)
|
|---|
| 478 | remove_memory_type_range(109, 0x27ff3000, 0x1000, 0)
|
|---|
| 479 | add_memory_type_range(110, 0x27ff3000, 0x1000, 0)
|
|---|
| 480 | remove_memory_type_range(110, 0x27ff3000, 0x1000, 0)
|
|---|
| 481 | add_memory_type_range(111, 0x27ff3000, 0x1000, 0)
|
|---|
| 482 | remove_memory_type_range(111, 0x27ff3000, 0x1000, 0)
|
|---|
| 483 | add_memory_type_range(112, 0x27ff3000, 0x3000, 0)
|
|---|
| 484 | ACPI: DSDT 0x27FF30C0 0023DF (v01 ABIT AWRDACPI 00001000 MSFT 0100000C)
|
|---|
| 485 | remove_memory_type_range(112, 0x27ff3000, 0x3000, 0)
|
|---|
| 486 | add_memory_type_range(113, 0x27ff0000, 0x1000, 0)
|
|---|
| 487 | remove_memory_type_range(113, 0x27ff0000, 0x1000, 0)
|
|---|
| 488 | add_memory_type_range(114, 0x27ff0000, 0x1000, 0)
|
|---|
| 489 | ACPI: FACS 0x27FF0000 000040
|
|---|
| 490 | remove_memory_type_range(114, 0x27ff0000, 0x1000, 0)
|
|---|
| 491 | add_memory_type_range(115, 0x27ff5000, 0x1000, 0)
|
|---|
| 492 | remove_memory_type_range(115, 0x27ff5000, 0x1000, 0)
|
|---|
| 493 | add_memory_type_range(116, 0x27ff5000, 0x1000, 0)
|
|---|
| 494 | ACPI: APIC 0x27FF54C0 00005C (v01 ABIT 00000000 00000000)
|
|---|
| 495 | remove_memory_type_range(116, 0x27ff5000, 0x1000, 0)
|
|---|
| 496 | remove_memory_type_range(107, 0x27ff3000, 0x1000, 0)
|
|---|
| 497 | add_memory_type_range(117, 0x27ff3000, 0x3000, 0)
|
|---|
| 498 | remove_memory_type_range(117, 0x27ff3000, 0x3000, 0)
|
|---|
| 499 | ACPI: Forced DSDT copy: length 0x023DF copied locally, original unmapped
|
|---|
| 500 | ACPI: All ACPI Tables successfully acquired
|
|---|
| 501 | add_memory_type_range(118, 0x27ff0000, 0x1000, 0)
|
|---|
| 502 | ACPI Error: [\_PR_.CPU0] Namespace lookup failure, AE_NOT_FOUND (20140724/dsobje
|
|---|
| 503 | ct-209)
|
|---|
| 504 | ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [_PSL] (Package) (
|
|---|
| 505 | 20140724/nsinit-459)
|
|---|
| 506 | add_memory_type_range(119, 0xff000, 0x1000, 0)
|
|---|
| 507 | add_memory_type_range(120, 0x27ff5000, 0x1000, 0)
|
|---|
| 508 | found io-apic with address 0xfec00000, global interrupt base 0, apic-id 2
|
|---|
| 509 | mapping io-apic 0 at physical address 0xfec00000
|
|---|
| 510 | add_memory_type_range(121, 0xfec00000, 0x1000, 0)
|
|---|
| 511 | io-apic 0 has range 0-23, 24 entries, version 0x00170011, apic-id 2
|
|---|
| 512 | setting ACPI interrupt model to APIC
|
|---|
| 513 | calculated irq routing entry: address 0xffff; pin 0; GSI 16; pci 1:0 pin 1 func
|
|---|
| 514 | mask 1; bios irq: 10; gsi 16; config 0x06
|
|---|
| 515 | IRQ routing table with 6 entries
|
|---|
| 516 | address 0xfffff; pin 0; GSI 16; pci 0:15 pin 1 func mask 1; bios irq: 10; gsi 16
|
|---|
| 517 | ; config 0x06
|
|---|
| 518 | address 0x13ffff; pin 0; GSI 18; pci 0:19 pin 1 func mask 1; bios irq: 11; gsi 1
|
|---|
| 519 | 8; config 0x06
|
|---|
| 520 | address 0x13ffff; pin 1; GSI 18; pci 0:19 pin 2 func mask 2; bios irq: 11; gsi 1
|
|---|
| 521 | 8; config 0x06
|
|---|
| 522 | address 0x9ffff; pin 0; GSI 19; pci 0:9 pin 1 func mask 1; bios irq: 12; gsi 19;
|
|---|
| 523 | config 0x06
|
|---|
| 524 | address 0x7ffff; pin 3; GSI 19; pci 0:7 pin 4 func mask 4; bios irq: 12; gsi 19;
|
|---|
| 525 | config 0x06
|
|---|
| 526 | address 0xffff; pin 0; GSI 16; pci 1:0 pin 1 func mask 1; bios irq: 10; gsi 16;
|
|---|
| 527 | config 0x06
|
|---|
| 528 | found interrupt override for bus 0, source irq 0, global irq 2, flags 0x00000004
|
|---|
| 529 |
|
|---|
| 530 | found interrupt override for bus 0, source irq 9, global irq 9, flags 0x00000000
|
|---|
| 531 |
|
|---|
| 532 | free_io_interrupt_vectors: freeing 16 vectors starting from 0
|
|---|
| 533 | reserve_io_interrupt_vectors: reserved 24 vectors starting from 0
|
|---|
| 534 | using io-apics for interrupt routing
|
|---|
| 535 | setting up apic for CPU 1: apic id 1, version 262161
|
|---|
| 536 | CPU 1: logical apic id: 0x2
|
|---|
| 537 | x86_init_fpu: CPU has no SSE... just enabling FPU.
|
|---|
| 538 | slab memory manager: created area 0x80801000 (132)
|
|---|
| 539 | initialize_commpage_syscall(): sysenter/sysexit supported
|
|---|
| 540 | allocate_commpage_entry(3, 5) -> 0x00000110
|
|---|
| 541 | allocate_commpage_entry(4, 34) -> 0x00000118
|
|---|
| 542 | allocate_commpage_entry(5, 74) -> 0x00000140
|
|---|
| 543 | allocate_commpage_entry(6, 86) -> 0x00000190
|
|---|
| 544 | allocate_commpage_entry(7, 97) -> 0x000001e8
|
|---|
| 545 | publish device: node 0x8281cb40, path acpi/namespace, module bus_managers/acpi/n
|
|---|
| 546 | amespace/device_v1
|
|---|
| 547 | registering power button
|
|---|
| 548 | add_memory_type_range(248, 0xff000, 0x1000, 0)
|
|---|
| 549 | module: Search for busses/usb/xhci failed.
|
|---|
| 550 | usb uhci -1: successfully started the controller
|
|---|
| 551 | usb ohci: no devices found
|
|---|
| 552 | usb ehci: no devices found
|
|---|
| 553 | usb hub 2: port 0: new device connected
|
|---|
| 554 | usb hub 8: port 0: new device connected
|
|---|
| 555 | usb hub 8: port 2: new device connected
|
|---|
| 556 | get_boot_partitions(): boot volume message:
|
|---|
| 557 | KMessage: buffer: 0x81a17058 (size/capacity: 347/347), flags: 0xa
|
|---|
| 558 | field: "booted from image" (BOOL): false
|
|---|
| 559 | field: "partition offset" (LLNG): 32768 (0x8000)
|
|---|
| 560 | field: "packaged" (BOOL): true
|
|---|
| 561 | field: "boot method" (LONG): 0 (0x0)
|
|---|
| 562 | field: "boot drive number" (LLNG): 128 (0x80)
|
|---|
| 563 | field: "disk identifier" (RAWT): data at 0x81a17164, 79 bytes
|
|---|
| 564 | get_boot_partitions(): boot method type: 0
|
|---|
| 565 | partitioning system: partitioning_systems/intel/extended/v1
|
|---|
| 566 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1)
|
|---|
| 567 | intel: ep_std_ops(0x1)
|
|---|
| 568 | intel: ep_std_ops(0x2)
|
|---|
| 569 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 570 | partitioning system: partitioning_systems/intel/map/v1
|
|---|
| 571 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1)
|
|---|
| 572 | intel: pm_std_ops(0x1)
|
|---|
| 573 | intel: pm_std_ops(0x2)
|
|---|
| 574 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 575 | partitioning system: partitioning_systems/efi_gpt/v1
|
|---|
| 576 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/efi_gpt/v1)
|
|---|
| 577 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 578 | file system: file_systems/devfs/v1
|
|---|
| 579 | KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1)
|
|---|
| 580 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 581 | file system: file_systems/packagefs/v1
|
|---|
| 582 | KDiskDeviceManager::_AddDiskSystem(file_systems/packagefs/v1)
|
|---|
| 583 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 584 | file system: file_systems/rootfs/v1
|
|---|
| 585 | KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1)
|
|---|
| 586 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 587 | file system: file_systems/bfs/v1
|
|---|
| 588 | KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1)
|
|---|
| 589 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 590 | number of disk systems: 7
|
|---|
| 591 | KDiskDeviceManager::_Scan(/dev/disk)
|
|---|
| 592 | PCI-ATA: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
|
|---|
| 593 | PCI-ATA: init channel...
|
|---|
| 594 | PCI-ATA: channel index 0
|
|---|
| 595 | PCI-ATA: bus master base 0xc000
|
|---|
| 596 | PCI-ATA: init channel done
|
|---|
| 597 | ata 0: _DevicePresent: device 0, presence 1
|
|---|
| 598 | ata 0: _DevicePresent: device 1, presence 1
|
|---|
| 599 | ata 0: deviceMask 3
|
|---|
| 600 | ata 0: probing device 0
|
|---|
| 601 | ata 0: signature of device 0: 0x0000
|
|---|
| 602 | ata 0-0: model number: IBM-DTLA-305030
|
|---|
| 603 | ata 0-0: serial number: YGEYG0E6423
|
|---|
| 604 | ata 0-0: firmware rev.: TW3FA60A
|
|---|
| 605 | ata 0-0: using DMA mode 0x12
|
|---|
| 606 | ata 0: identified ATA device 0
|
|---|
| 607 | ata 0: probing device 1
|
|---|
| 608 | ata 0 error: device 1 failed, error code is 0x00
|
|---|
| 609 | ata 0: signature of device 1: 0x0000
|
|---|
| 610 | ata 0 error: device ready not set
|
|---|
| 611 | ata 0-1 error: sending identify request failed
|
|---|
| 612 | ata 0 error: command failed, error bit is set. status 0x51, error 0x04
|
|---|
| 613 | publish device: node 0x82b559e8, path disk/ata/0/master/raw, module drivers/disk
|
|---|
| 614 | /scsi/scsi_disk/device_v1
|
|---|
| 615 | ata 0-0 error: invalid target lun 1 for ATA device
|
|---|
| 616 | ata 0-0 error: invalid target lun 2 for ATA device
|
|---|
| 617 | ata 0-0 error: invalid target lun 3 for ATA device
|
|---|
| 618 | ata 0-0 error: invalid target lun 4 for ATA device
|
|---|
| 619 | ata 0-0 error: invalid target lun 5 for ATA device
|
|---|
| 620 | ata 0-0 error: invalid target lun 6 for ATA device
|
|---|
| 621 | ata 0-0 error: invalid target lun 7 for ATA device
|
|---|
| 622 | ata 0 error: target device not present
|
|---|
| 623 | ata 0 error: invalid target device
|
|---|
| 624 | Last message repeated 12 times.
|
|---|
| 625 | PCI-ATA: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
|
|---|
| 626 | PCI-ATA: init channel...
|
|---|
| 627 | PCI-ATA: channel index 1
|
|---|
| 628 | PCI-ATA: bus master base 0xc008
|
|---|
| 629 | PCI-ATA: init channel done
|
|---|
| 630 | ata 1: _DevicePresent: device 0, presence 1
|
|---|
| 631 | ata 1: _DevicePresent: device 1, presence 1
|
|---|
| 632 | ata 1: deviceMask 3
|
|---|
| 633 | ata 1: probing device 0
|
|---|
| 634 | ata 1: signature of device 0: 0xeb14
|
|---|
| 635 | atapi 1-0: model number: SONY CD-RW CRX140E
|
|---|
| 636 | atapi 1-0: serial number: z
|
|---|
| 637 | atapi 1-0: firmware rev.: 1.2a
|
|---|
| 638 | atapi 1-0: using DMA mode 0x12
|
|---|
| 639 | ata 1: identified ATAPI device 0
|
|---|
| 640 | ata 1: probing device 1
|
|---|
| 641 | ata 1: signature of device 1: 0x0000
|
|---|
| 642 | ata 1-1: model number: SAMSUNG SV0602H
|
|---|
| 643 | ata 1-1: serial number: 0451J1FTC14017
|
|---|
| 644 | ata 1-1: firmware rev.: RH100-15
|
|---|
| 645 | ata 1-1: using DMA mode 0x12
|
|---|
| 646 | ata 1: identified ATA device 1
|
|---|
| 647 | publish device: node 0x82b55768, path disk/atapi/1/master/raw, module drivers/di
|
|---|
| 648 | sk/scsi/scsi_cd/device_v1
|
|---|
| 649 | atapi 1-0 error: invalid target lun 1
|
|---|
| 650 | atapi 1-0 error: invalid target lun 2
|
|---|
| 651 | atapi 1-0 error: invalid target lun 3
|
|---|
| 652 | atapi 1-0 error: invalid target lun 4
|
|---|
| 653 | atapi 1-0 error: invalid target lun 5
|
|---|
| 654 | atapi 1-0 error: invalid target lun 6
|
|---|
| 655 | atapi 1-0 error: invalid target lun 7
|
|---|
| 656 | ata 1 error: command failed, error bit is set. status 0x51, error 0x04
|
|---|
| 657 | publish device: node 0x82b55678, path disk/ata/1/slave/raw, module drivers/disk/
|
|---|
| 658 | scsi/scsi_disk/device_v1
|
|---|
| 659 | ata 1-1 error: invalid target lun 1 for ATA device
|
|---|
| 660 | ata 1-1 error: invalid target lun 2 for ATA device
|
|---|
| 661 | ata 1-1 error: invalid target lun 3 for ATA device
|
|---|
| 662 | ata 1-1 error: invalid target lun 4 for ATA device
|
|---|
| 663 | ata 1-1 error: invalid target lun 5 for ATA device
|
|---|
| 664 | ata 1-1 error: invalid target lun 6 for ATA device
|
|---|
| 665 | ata 1-1 error: invalid target lun 7 for ATA device
|
|---|
| 666 | ata 1 error: invalid target device
|
|---|
| 667 | Last message repeated 12 times.
|
|---|
| 668 | PCI-ATA: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
|
|---|
| 669 | PCI-ATA: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
|
|---|
| 670 | PCI-ATA: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
|
|---|
| 671 | PCI-ATA: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
|
|---|
| 672 | KDiskDeviceManager::_Scan(/dev/disk/ata)
|
|---|
| 673 | KDiskDeviceManager::_Scan(/dev/disk/ata/0)
|
|---|
| 674 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master)
|
|---|
| 675 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw)
|
|---|
| 676 | found device: /dev/disk/ata/0/master/raw
|
|---|
| 677 | DMAResource@0x8280ab80: low/high 0/100000000, max segment count 512, align 2, bo
|
|---|
| 678 | undary 65536, max transfer 131072, max segment size 33554432
|
|---|
| 679 | slab memory manager: created area 0xce001000 (313)
|
|---|
| 680 | slab memory manager: created area 0xce801000 (314)
|
|---|
| 681 | KDiskDeviceManager::_Scan(/dev/disk/ata/1)
|
|---|
| 682 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/slave)
|
|---|
| 683 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/slave/raw)
|
|---|
| 684 | found device: /dev/disk/ata/1/slave/raw
|
|---|
| 685 | DMAResource@0x8280aa00: low/high 0/100000000, max segment count 512, align 2, bo
|
|---|
| 686 | undary 65536, max transfer 131072, max segment size 33554432
|
|---|
| 687 | slab memory manager: created area 0xcf001000 (349)
|
|---|
| 688 | KDiskDeviceManager::_Scan(/dev/disk/atapi)
|
|---|
| 689 | KDiskDeviceManager::_Scan(/dev/disk/atapi/1)
|
|---|
| 690 | KDiskDeviceManager::_Scan(/dev/disk/atapi/1/master)
|
|---|
| 691 | KDiskDeviceManager::_Scan(/dev/disk/atapi/1/master/raw)
|
|---|
| 692 | found device: /dev/disk/atapi/1/master/raw
|
|---|
| 693 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/0/master/raw)
|
|---|
| 694 | intel: ep_std_ops(0x1)
|
|---|
| 695 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 696 | returned: -1
|
|---|
| 697 | intel: ep_std_ops(0x2)
|
|---|
| 698 | intel: pm_std_ops(0x1)
|
|---|
| 699 | trying: partitioning_systems/intel/map/v1
|
|---|
| 700 | intel: pm_identify_partition(0, 0: 0, 30738677760, 512)
|
|---|
| 701 | ata 0 error: timeout waiting for interrupt
|
|---|
| 702 | ata 0 error: RecoverLostInterrupt: device busy, status 0x58
|
|---|
| 703 | check_sense: Hardware error
|
|---|
| 704 | ata 0 error: device selection timeout
|
|---|
| 705 | ata 0-0 error: failed to send transfer request
|
|---|
| 706 | ata 0 error: device selection timeout
|
|---|
| 707 | ata 0-0 error: failed to send transfer request
|
|---|
| 708 | ata 0 error: device selection timeout
|
|---|
| 709 | ata 0-0 error: failed to send transfer request
|
|---|
| 710 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 711 | returned: -1
|
|---|
| 712 | intel: pm_std_ops(0x2)
|
|---|
| 713 | trying: partitioning_systems/efi_gpt/v1
|
|---|
| 714 | ata 0 error: device selection timeout
|
|---|
| 715 | ata 0-0 error: failed to send transfer request
|
|---|
| 716 | ata 0 error: device selection timeout
|
|---|
| 717 | ata 0-0 error: failed to send transfer request
|
|---|
| 718 | ata 0 error: device selection timeout
|
|---|
| 719 | ata 0-0 error: failed to send transfer request
|
|---|
| 720 | ata 0 error: device selection timeout
|
|---|
| 721 | ata 0-0 error: failed to send transfer request
|
|---|
| 722 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 723 | ata 0 error: device selection timeout
|
|---|
| 724 | ata 0-0 error: failed to send transfer request
|
|---|
| 725 | ata 0 error: device selection timeout
|
|---|
| 726 | ata 0-0 error: failed to send transfer request
|
|---|
| 727 | ata 0 error: device selection timeout
|
|---|
| 728 | ata 0-0 error: failed to send transfer request
|
|---|
| 729 | ata 0 error: device selection timeout
|
|---|
| 730 | ata 0-0 error: failed to send transfer request
|
|---|
| 731 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 732 | returned: -1
|
|---|
| 733 | trying: file_systems/devfs/v1
|
|---|
| 734 | returned: -1
|
|---|
| 735 | trying: file_systems/packagefs/v1
|
|---|
| 736 | returned: -1
|
|---|
| 737 | trying: file_systems/rootfs/v1
|
|---|
| 738 | returned: -1
|
|---|
| 739 | trying: file_systems/bfs/v1
|
|---|
| 740 | ata 0 error: device selection timeout
|
|---|
| 741 | ata 0-0 error: failed to send transfer request
|
|---|
| 742 | ata 0 error: device selection timeout
|
|---|
| 743 | ata 0-0 error: failed to send transfer request
|
|---|
| 744 | ata 0 error: device selection timeout
|
|---|
| 745 | ata 0-0 error: failed to send transfer request
|
|---|
| 746 | ata 0 error: device selection timeout
|
|---|
| 747 | ata 0-0 error: failed to send transfer request
|
|---|
| 748 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 749 | returned: -1
|
|---|
| 750 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/1/slave/raw)
|
|---|
| 751 | intel: ep_std_ops(0x1)
|
|---|
| 752 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 753 | returned: -1
|
|---|
| 754 | intel: ep_std_ops(0x2)
|
|---|
| 755 | intel: pm_std_ops(0x1)
|
|---|
| 756 | trying: partitioning_systems/intel/map/v1
|
|---|
| 757 | intel: pm_identify_partition(0, 1: 0, 33820286976, 512)
|
|---|
| 758 | ata 1 error: timeout waiting for interrupt
|
|---|
| 759 | ata 1 error: RecoverLostInterrupt: device busy, status 0x58
|
|---|
| 760 | ata 1 error: device selection timeout
|
|---|
| 761 | ata 1-1 error: failed to send transfer request
|
|---|
| 762 | ata 1 error: device selection timeout
|
|---|
| 763 | ata 1-1 error: failed to send transfer request
|
|---|
| 764 | ata 1 error: device selection timeout
|
|---|
| 765 | ata 1-1 error: failed to send transfer request
|
|---|
| 766 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 767 | returned: -1
|
|---|
| 768 | intel: pm_std_ops(0x2)
|
|---|
| 769 | trying: partitioning_systems/efi_gpt/v1
|
|---|
| 770 | ata 1 error: device selection timeout
|
|---|
| 771 | ata 1-1 error: failed to send transfer request
|
|---|
| 772 | ata 1 error: device selection timeout
|
|---|
| 773 | ata 1-1 error: failed to send transfer request
|
|---|
| 774 | ata 1 error: device selection timeout
|
|---|
| 775 | ata 1-1 error: failed to send transfer request
|
|---|
| 776 | ata 1 error: device selection timeout
|
|---|
| 777 | ata 1-1 error: failed to send transfer request
|
|---|
| 778 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 779 | ata 1 error: device selection timeout
|
|---|
| 780 | ata 1-1 error: failed to send transfer request
|
|---|
| 781 | ata 1 error: device selection timeout
|
|---|
| 782 | ata 1-1 error: failed to send transfer request
|
|---|
| 783 | ata 1 error: device selection timeout
|
|---|
| 784 | ata 1-1 error: failed to send transfer request
|
|---|
| 785 | ata 1 error: device selection timeout
|
|---|
| 786 | ata 1-1 error: failed to send transfer request
|
|---|
| 787 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 788 | returned: -1
|
|---|
| 789 | trying: file_systems/devfs/v1
|
|---|
| 790 | returned: -1
|
|---|
| 791 | trying: file_systems/packagefs/v1
|
|---|
| 792 | returned: -1
|
|---|
| 793 | trying: file_systems/rootfs/v1
|
|---|
| 794 | returned: -1
|
|---|
| 795 | trying: file_systems/bfs/v1
|
|---|
| 796 | ata 1 error: device selection timeout
|
|---|
| 797 | ata 1-1 error: failed to send transfer request
|
|---|
| 798 | ata 1 error: device selection timeout
|
|---|
| 799 | ata 1-1 error: failed to send transfer request
|
|---|
| 800 | ata 1 error: device selection timeout
|
|---|
| 801 | ata 1-1 error: failed to send transfer request
|
|---|
| 802 | ata 1 error: device selection timeout
|
|---|
| 803 | ata 1-1 error: failed to send transfer request
|
|---|
| 804 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 805 | returned: -1
|
|---|
| 806 | device 0: /dev/disk/ata/0/master/raw
|
|---|
| 807 | media status: No error
|
|---|
| 808 | device flags: 2
|
|---|
| 809 | offset: 0
|
|---|
| 810 | size: 30738677760 (29314.687 MB)
|
|---|
| 811 | content size: 0
|
|---|
| 812 | block size: 512
|
|---|
| 813 | child count: 0
|
|---|
| 814 | index: -1
|
|---|
| 815 | status: 2
|
|---|
| 816 | flags: 1
|
|---|
| 817 | volume: -1
|
|---|
| 818 | disk system: <NULL>
|
|---|
| 819 | name: IBM-DTLA-305030
|
|---|
| 820 | content name: <NULL>
|
|---|
| 821 | type: <NULL>
|
|---|
| 822 | content type: <NULL>
|
|---|
| 823 | params: <NULL>
|
|---|
| 824 | content params: <NULL>
|
|---|
| 825 | device 1: /dev/disk/ata/1/slave/raw
|
|---|
| 826 | media status: No error
|
|---|
| 827 | device flags: 2
|
|---|
| 828 | offset: 0
|
|---|
| 829 | size: 33820286976 (32253.539 MB)
|
|---|
| 830 | content size: 0
|
|---|
| 831 | block size: 512
|
|---|
| 832 | child count: 0
|
|---|
| 833 | index: -1
|
|---|
| 834 | status: 2
|
|---|
| 835 | flags: 1
|
|---|
| 836 | volume: -1
|
|---|
| 837 | disk system: <NULL>
|
|---|
| 838 | name: SAMSUNG SV0602H
|
|---|
| 839 | content name: <NULL>
|
|---|
| 840 | type: <NULL>
|
|---|
| 841 | content type: <NULL>
|
|---|
| 842 | params: <NULL>
|
|---|
| 843 | content params: <NULL>
|
|---|
| 844 | device 2: /dev/disk/atapi/1/master/raw
|
|---|
| 845 | media status: No media present
|
|---|
| 846 | device flags: 5
|
|---|
| 847 | ata 0 error: device selection timeout
|
|---|
| 848 | ata 0-0 error: failed to send transfer request
|
|---|
| 849 | ata 0 error: device selection timeout
|
|---|
| 850 | ata 0-0 error: failed to send transfer request
|
|---|
| 851 | ata 0 error: device selection timeout
|
|---|
| 852 | ata 0-0 error: failed to send transfer request
|
|---|
| 853 | ata 0 error: device selection timeout
|
|---|
| 854 | ata 0-0 error: failed to send transfer request
|
|---|
| 855 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 856 | ata 1 error: device selection timeout
|
|---|
| 857 | ata 1-1 error: failed to send transfer request
|
|---|
| 858 | ata 1 error: device selection timeout
|
|---|
| 859 | ata 1-1 error: failed to send transfer request
|
|---|
| 860 | ata 1 error: device selection timeout
|
|---|
| 861 | ata 1-1 error: failed to send transfer request
|
|---|
| 862 | ata 1 error: device selection timeout
|
|---|
| 863 | ata 1-1 error: failed to send transfer request
|
|---|
| 864 | das_read(): request.Wait() returned: Device timeout
|
|---|
| 865 | PANIC: did not find any boot partitions!
|
|---|
| 866 | Welcome to Kernel Debugging Land...
|
|---|
| 867 | Thread 16 "main2" running on CPU 0
|
|---|
| 868 | stack trace for thread 16 "main2"
|
|---|
| 869 | kernel stack: 0x81a5f000 to 0x81a63000
|
|---|
| 870 | frame caller <image>:function + offset
|
|---|
| 871 | 0 81a629b8 (+ 32) 801455e2 <kernel_x86> arch_debug_stack_trace() + 0x12
|
|---|
| 872 | 1 81a629d8 (+ 16) 800a4c8f <kernel_x86> stack_trace_trampoline__FPv() + 0x0b
|
|---|
| 873 |
|
|---|
| 874 | 2 81a629e8 (+ 12) 8013738e <kernel_x86> arch_debug_call_with_fault_handler()
|
|---|
| 875 | + 0x1b
|
|---|
| 876 | 3 81a629f4 (+ 48) 800a67fa <kernel_x86> debug_call_with_fault_handler() + 0x
|
|---|
| 877 | 5a
|
|---|
| 878 | 4 81a62a24 (+ 64) 800a4eab <kernel_x86> kernel_debugger_loop__FPCcT0Pcl() +
|
|---|
| 879 | 0x217
|
|---|
| 880 | 5 81a62a64 (+ 48) 800a5227 <kernel_x86> kernel_debugger_internal__FPCcT0Pcl(
|
|---|
| 881 | ) + 0x53
|
|---|
| 882 | 6 81a62a94 (+ 48) 800a6b82 <kernel_x86> panic() + 0x3a
|
|---|
| 883 | 7 81a62ac4 (+1168) 800fe190 <kernel_x86> vfs_mount_boot_file_system() + 0x80
|
|---|
| 884 | 8 81a62f54 (+ 96) 800637fd <kernel_x86> main2__FPv() + 0xad
|
|---|
| 885 | 9 81a62fb4 (+ 48) 80084363 <kernel_x86> common_thread_entry__FPv() + 0x3b
|
|---|
