1 | KERN: PCI: device 1c02: 6 Series/C200 Series Chipset Family SATA AHCI Controller
|
---|
2 | KERN: PCI: info: Mass storage controller (SATA controller, AHCI 1.0)
|
---|
3 | KERN: ahci: generic AHCI controller found! vendor 0x8086, device 0x1c02
|
---|
4 | KERN: ahci: ahci_register_device
|
---|
5 | KERN: ahci: ahci_init_driver
|
---|
6 | KERN: ahci: ahci_sim_init_bus
|
---|
7 | KERN: ahci: ahci_sim_init_bus: pciDevice 0xffffffff8247c060
|
---|
8 | KERN: ahci: AHCIController::Init 0:31:2 vendor 8086, device 1c02
|
---|
9 | KERN: ahci: PCI SATA capability found at offset 0xa8
|
---|
10 | KERN: ahci: satacr0 = 0x0010b012, satacr1 = 0x00000048
|
---|
11 | KERN: ahci: pcicmd old 0x0007
|
---|
12 | KERN: ahci: pcicmd new 0x0006
|
---|
13 | KERN: ahci: using MSI vector 24
|
---|
14 | KERN: ahci: registers at 0xf7c06000, size 0x800
|
---|
15 | KERN: ahci: mapping physical address 0xf7c06000 with 2048 bytes for AHCI HBA regs
|
---|
16 | KERN: ahci: physical = 0xf7c06000, virtual = 0xffffffff81a06000, offset = 0, phyadr = 0xf7c06000, mapadr = 0xffffffff81a06000, size = 4096, area = 0x000002f9
|
---|
17 | KERN: ahci: cap: Interface Speed Support: generation 2
|
---|
18 | KERN: ahci: cap: Number of Command Slots: 32 (raw 0x1f)
|
---|
19 | KERN: ahci: cap: Number of Ports: 4 (raw 0x3)
|
---|
20 | KERN: ahci: cap: Supports Port Multiplier: no
|
---|
21 | KERN: ahci: cap: Supports External SATA: no
|
---|
22 | KERN: ahci: cap: Enclosure Management Supported: yes
|
---|
23 | KERN: ahci: cap: Supports Command List Override: yes
|
---|
24 | KERN: ahci: cap: Supports Staggered Spin-up: yes
|
---|
25 | KERN: ahci: cap: Supports Mechanical Presence Switch: no
|
---|
26 | KERN: ahci: cap: Supports 64-bit Addressing: yes
|
---|
27 | KERN: ahci: cap: Supports Native Command Queuing: yes
|
---|
28 | KERN: ahci: cap: Supports SNotification Register: no
|
---|
29 | KERN: ahci: cap: Supports Command List Override: yes
|
---|
30 | KERN: ahci: cap: Supports AHCI mode only: no
|
---|
31 | KERN: ahci: cap2: DevSleep Entrance from Slumber Only: no
|
---|
32 | KERN: ahci: cap2: Supports Aggressive Device Sleep Management: no
|
---|
33 | KERN: ahci: cap2: Supports Device Sleep: no
|
---|
34 | KERN: ahci: cap2: Automatic Partial to Slumber Transitions: yes
|
---|
35 | KERN: ahci: cap2: NVMHCI Present: no
|
---|
36 | KERN: ahci: cap2: BIOS/OS Handoff: no
|
---|
37 | KERN: ahci: ghc: AHCI Enable: yes
|
---|
38 | KERN: ahci: Ports Implemented Mask: 0x000003 Number of Available Ports: 2
|
---|
39 | KERN: ahci: AHCI Version 0001.03.00 Interrupt 24
|
---|
40 | KERN: ahci: AHCIPort::Init1 port 0
|
---|
41 | KERN: ahci: allocating 4096 bytes for AHCI port 0
|
---|
42 | KERN: ahci: area = 762, size = 4096, virt = 0xffffffff81a07000, phy = 0xc5f000
|
---|
43 | KERN: ahci: PRD table is at 0xffffffff81a07580
|
---|
44 | KERN: ahci: AHCIPoKERN: rt::Init1 port 1
|
---|
45 | KERN: ahci: allocating 4096 bytes for AHCI port 1
|
---|
46 | KERN: ahci: area = 763, size = 4096, virt = 0xffffffff81a08000, phy = 0xc58000
|
---|
47 | KERN: ahci: PRD table is at 0xffffffff81a08580
|
---|
48 | KERN: ahci: AHCIPort::Init2 port 0
|
---|
49 | KERN: ahci: AHCIPort::ResetPort port 0
|
---|
50 | KERN: ahci: AHCIPort::InterruptErrorHandler port 0, fCommandsActive 0x00000000, is 0x00400040, ci 0x00000000
|
---|
51 | KERN: ahci: AHCIPort::ResetPort port 0, deviceBusy 0, forceDeviceReset 1
|
---|
52 | KERN: ahci: ssts 0x00000123
|
---|
53 | KERN: ahci: AHCIPort::PostReset port 0
|
---|
54 | KERN: ahci: sctl.ipm 0x03
|
---|
55 | KERN: ahci: sctl.spd 0x00
|
---|
56 | KERN: ahci: sctl.det 0x00
|
---|
57 | KERN: ahci: serr 0x00000000
|
---|
58 | KERN: ahci: sact 0x00000000
|
---|
59 | KERN: ahci: PhyReady Change
|
---|
60 | KERN: ahci: Port Connect Change
|
---|
61 | KERN: ahci: AHCIPort::_HardReset() PORT_CMD_ST set, behaviour undefined
|
---|
62 | KERN: ahci: device signature 0x00000101 (ATA)
|
---|
63 | KERN: ahci: AHCIPort::InterruptErrorHandler port 0, fCommandsActive 0x00000000, is 0x00400040, ci 0x00000000
|
---|
64 | KERN: ahci: ie 0x7dc0007f
|
---|
65 | KERN: ahci: ssts 0x00000123
|
---|
66 | KERN: ahci: is 0x00400040
|
---|
67 | KERN: ahci: sctl.ipm 0x03
|
---|
68 | KERN: ahci: cmd 0x00004017
|
---|
69 | KERN: ahci: sctl.spd 0x00
|
---|
70 | KERN: ahci: ssts 0x00000123
|
---|
71 | KERN: ahci: sctl.det 0x00
|
---|
72 | KERN: ahci: sctl.ipm 0x03
|
---|
73 | KERN: ahci: serr 0x04050000
|
---|
74 | KERN: ahci: sctl.spd 0x00
|
---|
75 | KERN: ahci: sact 0x00000000
|
---|
76 | KERN: ahci: sctl.det 0x00
|
---|
77 | KERN: ahci: PhyReady Change
|
---|
78 | KERN: ahci: Port Connect Change
|
---|
79 | KERN: ahci: serr 0x00000000
|
---|
80 | KERN: ahci: AHCIPort::_HardReset() PORT_CMD_ST set, behaviour undefined
|
---|
81 | KERN: ahci: sact 0x00000000
|
---|
82 | KERN: ahci: AHCIPort::InterruptErrorHandler port 0, fCommandsActive 0x00000000, is 0x00400040, ci 0x00000000
|
---|
83 | KERN: ahci: tfd 0x00000080
|
---|
84 | KERN: ahci: ssts 0x00000123
|
---|
85 | KERN: ahci: AHCIPort::Init2 port 1
|
---|
86 | KERN: ahci: sctl.ipm 0x03
|
---|
87 | KERN: ahci: AHCIPort::ResetPort port 1
|
---|
88 | KERN: ahci: sctl.spd 0x00
|
---|
89 | KERN: ahci: AHCIPort::ResetPort port 1, deviceBusy 0, forceDeviceReset 1
|
---|
90 | KERN: ahci: sctl.det 0x00
|
---|
91 | KERN: ahci: serr 0x04050000
|
---|
92 | KERN: ahci: sact 0x00000000
|
---|
93 | KERN: ahci: PhyReady Change
|
---|
94 | KERN: ahci: Port Connect Change
|
---|
95 | KERN: ahci: AHCIPort::_HardReset() PORT_CMD_ST set, behaviour undefined
|
---|
96 | KERN: ahci: AHCIPort::PostReset port 1
|
---|
97 | KERN: ahci: AHCIPort::InterruptErrorHandler port 0, fCommandsActive 0x00000000, is 0x00400000, ci 0x00000000
|
---|
98 | KERN: ahci: device signature 0xeb140101 (ATAPI)
|
---|
99 | KERN: ahci: ssts 0x00000123
|
---|
100 | KERN: ahci: ie 0x7dc0007f
|
---|
101 | KERN: ahci: sctl.ipm 0x03
|
---|
102 | KERN: ahci: is 0x00000000
|
---|
103 | KERN: ahci: sctl.spd 0x00
|
---|
104 | KERN: ahci: cmd 0x0100c017
|
---|
105 | KERN: ahci: sctl.det 0x00
|
---|
106 | KERN: ahci: ssts 0x00000113
|
---|
107 | KERN: ahci: serr 0x00050000
|
---|
108 | KERN: ahci: sctl.ipm 0x03
|
---|
109 | KERN: ahci: sact 0x00000000
|
---|
110 | KERN: ahci: sctl.spd 0x00
|
---|
111 | KERN: ahci: PhyReady Change
|
---|
112 | KERN: ahci: sctl.det 0x00
|
---|
113 | KERN: ahci: serr 0x00000000
|
---|
114 | KERN: ahci: sact 0x00000000
|
---|
115 | KERN: ahci: tfd 0x00000100
|
---|
116 | KERN: ahci: cookie = 0xffffffff8222a180
|
---|
117 | KERN: ahci: ahci_path_inquiry, cookie 0xffffffff8222a180
|
---|
118 | KERN: ahci: ahci_scan_bus, cookie 0xffffffff8222a180
|
---|
119 | KERN: ahci: AHCIPort::ScsiTestUnitReady port 0
|
---|
120 | KERN: ahci: AHCIPort::ScsiInquiry port 0
|
---|
121 | KERN: ahci: lba 1, lba48 1, fUse48BitCommands 1, sectors 268435455, sectors48 1953525168, size 1000204886016
|
---|
122 | KERN: ahci: model number: WDC WD10EADS-00L5B1
|
---|
123 | KERN: ahci: serial number: WD-WCAU45958290
|
---|
124 | KERN: ahci: firmware rev.: 01.01A01
|
---|
125 | KERN: ahci: sg_memcpy phyAddr 0x12b6e1a0, size 96
|
---|
126 | KERN: ahci: ahci_get_restrictions, cookie 0xffffffff8222a180
|
---|
127 | KERN: ahci: AHCIPort::ScsiGetRestrictions port 0: isATAPI 0, noAutoSense 0, maxBlocks 65536
|
---|
128 | KERN: ahci: ahci_get_restrictions, cookie 0xffffffff8222a180
|
---|
129 | KERN: ahci: AHCIPort::ScsiGetRestrictions port 1: isATAPI 1, noAutoSense 1, maxBlocks 256
|
---|
130 | KERN: ahci: AHCIPort::ScsiReadCapacity port 0
|
---|
131 | KERN: ahci: SectorSize 512, SectorCount 0x74706db0
|
---|
132 | KERN: ahci: sg_memcpy phyAddr 0x12b6e260, size 8
|
---|
133 | KERN: ahci: AHCIPort::ScsiReadCapacity port 0
|
---|
134 | KERN: ahci: SectorSize 512, SectorCount 0x74706db0
|
---|
135 | KERN: ahci: sg_memcpy phyAddr 0x12b6e290, size 8
|
---|
136 | KERN: ahci: ahci_ioctl, cookie 0xffffffff8222a180
|
---|
137 | KERN: ahci: AHCIPort::InterruptErrorHandler port 1, fCommandsActive 0x00000001, is 0x40000001, ci 0x00000001
|
---|
138 | KERN: ahci: ssts 0x00000113
|
---|
139 | KERN: ahci: sctl.ipm 0x03
|
---|
140 | KERN: ahci: sctl.spd 0x00
|
---|
141 | KERN: ahci: sctl.det 0x00
|
---|
142 | KERN: ahci: serr 0x00000000
|
---|
143 | KERN: ahci: sact 0x00000000
|
---|
144 | KERN: ahci: Task File Error
|
---|
145 | KERN: ahci: AHCIPort::ResetPort port 1
|
---|
146 | KERN: ahci: AHCIPort::ResetPort port 1, deviceBusy 0, forceDeviceReset 0
|
---|
147 | KERN: ahci: AHCIPort::PostReset port 1
|
---|
148 | KERN: ahci: device signature 0xeb140101 (ATAPI)
|
---|
149 | KERN: ahci: sata_request::finish ATA command 0xa0 failed: status 0x51, error 0x24
|
---|
150 | KERN: ahci: sata_request::finish ATAPI packet 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (len 10)
|
---|
151 | KERN: ahci: ahci_ioctl, cookie 0xffffffff8222a180
|
---|
152 | KERN: ahci: AHCIPort::ScsiReadCapacity port 0
|
---|
153 | KERN: ahci: SectorSize 512, SectorCount 0x74706db0
|
---|
154 | KERN: ahci: sg_memcpy phyAddr 0x12b6e4f0, size 8
|
---|
155 | KERN: ahci: AHCIPort::ScsiReadCapacity port 0
|
---|
156 | KERN: ahci: SectorSize 512, SectorCount 0x74706db0
|
---|
157 | KERN: ahci: sg_memcpy phyAddr 0x12b6e480, size 8
|
---|
158 | KERN: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43
|
---|
159 | KERN: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43
|
---|
160 | KERN: ahci: AHCIPort::ScsiReadCapacity port 0
|
---|
161 | KERN: ahci: SectorSize 512, SectorCount 0x74706db0
|
---|
162 | KERN: ahci: sg_memcpy phyAddr 0x1c7887a0, size 8
|
---|
163 | KERN: ahci: AHCIPort::ScsiReadCapacity port 0
|
---|
164 | KERN: ahci: SectorSize 512, SectorCount 0x74706db0
|
---|
165 | KERN: ahci: sg_memcpy phyAddr 0x1c788730, size 8
|
---|
166 |
|
---|