| 1 | options = 0
|
|---|
| 2 | No APM available.
|
|---|
| 3 | smp: using ACPI to detect MP configuration
|
|---|
| 4 | smp: local apic address is 0xfee00000
|
|---|
| 5 | smp: found local APIC with id 0
|
|---|
| 6 | smp: found local APIC with id 1
|
|---|
| 7 | smp: found io APIC with id 2 and address 0xfec00000
|
|---|
| 8 | VESA version = 3.0, capabilities 1
|
|---|
| 9 | OEM string: Intel(r)Poulsbo Graphics Chip Accelerated VGA BIOS
|
|---|
| 10 | 0x160: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 11 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 12 | 0x161: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 13 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 14 | 0x162: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 15 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 16 | 0x163: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 17 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 18 | 0x164: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 19 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 20 | 0x165: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 21 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 22 | 0x166: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 23 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 24 | 0x167: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 25 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 26 | 0x168: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 27 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 28 | 0x169: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 29 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 30 | 0x16a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 31 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 32 | 0x16b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 33 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 34 | 0x16c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 35 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 36 | 0x16d: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 37 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 38 | 0x16e: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 39 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 40 | 0x16f: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 41 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 42 | 0x170: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 43 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 44 | 0x171: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 45 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 46 | 0x13c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 47 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 48 | 0x14d: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 49 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 50 | 0x15c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 51 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 52 | 0x13a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 53 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 54 | 0x14b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 55 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 56 | 0x15a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 57 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 58 | 0x107: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 59 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 60 | 0x11a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 61 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 62 | 0x11b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 63 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 64 | 0x105: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 65 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 66 | 0x117: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 67 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 68 | 0x118: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
|
|---|
| 69 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 70 | 0x112: 640 x 480 x 32 (a = 155, mem = 6, phy = 3f800000, p = 1, b = 1)
|
|---|
| 71 | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
|
|---|
| 72 | 0x114: 800 x 600 x 16 (a = 155, mem = 6, phy = 3f800000, p = 1, b = 1)
|
|---|
| 73 | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
|
|---|
| 74 | 0x115: 800 x 600 x 32 (a = 155, mem = 6, phy = 3f800000, p = 1, b = 1)
|
|---|
| 75 | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
|
|---|
| 76 | 0x101: 640 x 480 x 8 (a = 155, mem = 4, phy = 3f800000, p = 1, b = 1)
|
|---|
| 77 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 78 | 0x103: 800 x 600 x 8 (a = 155, mem = 4, phy = 3f800000, p = 1, b = 1)
|
|---|
| 79 | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
|
|---|
| 80 | 0x111: 640 x 480 x 16 (a = 155, mem = 6, phy = 3f800000, p = 1, b = 1)
|
|---|
| 81 | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
|
|---|
| 82 | Using mode 0x115
|
|---|
| 83 | VESA compatible graphics!
|
|---|
| 84 | EDID1: 4f
|
|---|
| 85 | EDID2: ebx 102
|
|---|
| 86 | EDID3: 4f
|
|---|
| 87 | EDID info:
|
|---|
| 88 | Vendor: AUO
|
|---|
| 89 | Product ID: 4565
|
|---|
| 90 | Serial #: 0
|
|---|
| 91 | Produced in week/year: 1/2009
|
|---|
| 92 | EDID version: 1.3
|
|---|
| 93 | Type: Digital
|
|---|
| 94 | Digital Bit Depth: 0
|
|---|
| 95 | Size: 22 cm x 13 cm
|
|---|
| 96 | Gamma=2.2
|
|---|
| 97 | White (X,Y)=(0.313,0.329)
|
|---|
| 98 | Supported Future Video Modes:
|
|---|
| 99 | Supported VESA Video Modes:
|
|---|
| 100 | Additional Video Mode (1280x720@60Hz):
|
|---|
| 101 | clock=61.5 MHz
|
|---|
| 102 | h: (1280, 1328, 1360, 1392)
|
|---|
| 103 | v: (720, 723, 729, 736)
|
|---|
| 104 | size: 22.199 cm x 12.5 cm
|
|---|
| 105 | border: 0 cm x 0 cm
|
|---|
| 106 | Ascii Data: AUO
|
|---|
| 107 | Ascii Data: B101EW01 V1
|
|---|
| 108 | Welcome to the Haiku boot loader!
|
|---|
| 109 | number of drives: 2
|
|---|
| 110 | add_partitions_for(0x001051f8, mountFS = no)
|
|---|
| 111 | add_partitions_for(fd = 0, mountFS = no)
|
|---|
| 112 | 0x00105420 Partition::Partition
|
|---|
| 113 | 0x00105420 Partition::Scan()
|
|---|
| 114 | check for partitioning_system: GUID Partition Map
|
|---|
| 115 | check for partitioning_system: Intel Partition Map
|
|---|
| 116 | priority: 810
|
|---|
| 117 | check for partitioning_system: Intel Extended Partition
|
|---|
| 118 | 0x00105598 Partition::Partition
|
|---|
| 119 | 0x00105420 Partition::AddChild 0x00105598
|
|---|
| 120 | 0x00105598 Partition::SetParent 0x00105420
|
|---|
| 121 | new child partition!
|
|---|
| 122 | 0x00105420 Partition::Scan(): scan child 0x00105598 (start = 4194304, size = 964689920, parent = 0x00105420)!
|
|---|
| 123 | 0x00105598 Partition::Scan()
|
|---|
| 124 | check for partitioning_system: GUID Partition Map
|
|---|
| 125 | check for partitioning_system: Intel Partition Map
|
|---|
| 126 | check for partitioning_system: Intel Extended Partition
|
|---|
| 127 | 0x00105420 Partition::~Partition
|
|---|
| 128 | 0x00105598 Partition::SetParent 0x00000000
|
|---|
| 129 | boot partition offset: 4194304
|
|---|
| 130 | 0x00105598 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 131 | PackageVolumeInfo::SetTo()
|
|---|
| 132 | PackageVolumeInfo::_InitState(): failed to parse activated-packages: No such file or directory
|
|---|
| 133 | load kernel kernel_x86...
|
|---|
| 134 | video mode: 800x600x32
|
|---|
| 135 | ucode_load: system/data/firmware/intel-ucode/06-1c-02
|
|---|
| 136 | ucode_load: couldn't find microcode
|
|---|
| 137 | maximum boot loader heap usage: 583416, currently used: 572512
|
|---|
| 138 | smp: found 2 cpus
|
|---|
| 139 | smp: apic_phys = 0xfee00000
|
|---|
| 140 | smp: ioapic_phys = 0xfec00000
|
|---|
| 141 | smp: apic (mapped) = 0x8190e000
|
|---|
| 142 | APIC ticks/sec = 133011274
|
|---|
| 143 | trampolining other cpus
|
|---|
| 144 | wait for delivery
|
|---|
| 145 | deassert INIT
|
|---|
| 146 | wait for delivery
|
|---|
| 147 | num startups = 2
|
|---|
| 148 | send STARTUP
|
|---|
| 149 | wait for delivery
|
|---|
| 150 | send STARTUP
|
|---|
| 151 | wait for delivery
|
|---|
| 152 | done trampolining
|
|---|
| 153 | kernel entry at 8005d250
|
|---|
| 154 | Welcome to kernel debugger output!
|
|---|
| 155 | Haiku revision: hrev55993_5170_1, debug level: 2
|
|---|
| 156 | CPU: no microcode provided
|
|---|
| 157 | reserve_io_interrupt_vectors: reserved 2 vectors starting from 98
|
|---|
| 158 | CPU 0: type 0 family 6 extended_family 0 model 12 extended_model 1 stepping 2, string 'GenuineIntel'
|
|---|
| 159 | CPU 0: vendor 'Intel' model name 'Intel(R) Atom(TM) CPU Z530 @ 1.60GHz'
|
|---|
| 160 | CPU 0: apic id 0, package 0, core 0, smt 0
|
|---|
| 161 | CPU 0: cache sharing: L1 id 0, L2 id 0
|
|---|
| 162 | CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 dtes64 monitor dscpl vmx est tm2 ssse3 xtpr pdcm movbe nx dts aperfmperf
|
|---|
| 163 | CPU 0: patch_level 529
|
|---|
| 164 | reserve_io_interrupt_vectors: reserved 16 vectors starting from 0
|
|---|
| 165 | using PAE paging
|
|---|
| 166 | mark_page_range_in_use(0x0, 0x100): start page is before free list
|
|---|
| 167 | mark_page_range_in_use(0x0, 0xa0): start page is before free list
|
|---|
| 168 | Welcome to syslog debug output!
|
|---|
| 169 | Haiku revision: hrev55993_5170_mapping local apic at 0x8190e000
|
|---|
| 170 | CPU 1: type 0 family 6 extended_family 0 model 12 extended_model 1 stepping 2, string 'GenuineIntel'
|
|---|
| 171 | CPU 1: vendor 'Intel' model name 'Intel(R) Atom(TM) CPU Z530 @ 1.60GHz'
|
|---|
| 172 | CPU 1: apic id 1, package 0, core 0, smt 1
|
|---|
| 173 | CPU 1: cache sharing: L1 id 0, L2 id 0
|
|---|
| 174 | CPU 1: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 dtes64 monitor dscpl vmx est tm2 ssse3 xtpr pdcm movbe nx dts aperfmperf
|
|---|
| 175 | CPU 1: patch_level 529
|
|---|
| 176 | setting up apic for CPU 0: apic id 0, version 327700
|
|---|
| 177 | CPU 0: logical apic id: 0x1
|
|---|
| 178 | x86_init_fpu: CPU has SSE... enabling FXSR and XMM.
|
|---|
| 179 | reserve_io_interrupt_vectors: reserved 3 vectors starting from 221
|
|---|
| 180 | reserve_io_interrupt_vectors: reserved 1 vectors starting from 219
|
|---|
| 181 | arch_init_timer: using APIC timer.
|
|---|
| 182 | allocate_commpage_entry(2, 16) -> 0x00000100
|
|---|
| 183 | scheduler_init: found 2 logical cpus and 2 cache levels
|
|---|
| 184 | scheduler switches: single core: true, cpu load tracking: false, core load tracking: false
|
|---|
| 185 | scheduler: switching to low latency mode
|
|---|
| 186 | apm_init()
|
|---|
| 187 | msi support enabled
|
|---|
| 188 | PCI: pci_module_init
|
|---|
| 189 | PCI: mechanism addr: e0000000, seg: 0, start: 0, end: ff
|
|---|
| 190 | PCI: mechanism pcie controller found
|
|---|
| 191 | PCI: FixupDevices: checking bus 2 behind 8086:8110
|
|---|
| 192 | PCI: dom 0, bus 0, dev 28, func 0, changed PCI bridge control from 0x0004 to 0x0007
|
|---|
| 193 | PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 8100, revision 07
|
|---|
| 194 | PCI: class_base 06, class_function 00, class_api 00
|
|---|
| 195 | PCI: vendor 8086: Intel Corporation
|
|---|
| 196 | PCI: device 8100: US15W/US15X SCH [Poulsbo] Host Bridge
|
|---|
| 197 | PCI: info: Bridge (Host bridge)
|
|---|
| 198 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 199 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 200 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 201 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 202 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 203 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 204 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 205 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 206 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 207 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 208 | PCI: Capabilities: (not supported)
|
|---|
| 209 | PCI: [dom 0, bus 0] bus 0, device 2, function 0: vendor 8086, device 8108, revision 07
|
|---|
| 210 | PCI: class_base 03, class_function 00, class_api 00
|
|---|
| 211 | PCI: vendor 8086: Intel Corporation
|
|---|
| 212 | PCI: device 8108: US15W/US15X SCH [Poulsbo] Graphics Controller
|
|---|
| 213 | PCI: info: Display controller (VGA compatible controller, VGA controller)
|
|---|
| 214 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 215 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 216 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 217 | PCI: interrupt_line 07, interrupt_pin 01, min_grant 00, max_latency 00
|
|---|
| 218 | PCI: base reg 0: host d0100000, pci d0100000, size 00080000, flags 00
|
|---|
| 219 | PCI: base reg 1: host 00001800, pci 00001800, size 00000008, flags 01
|
|---|
| 220 | PCI: base reg 2: host c0000000, pci c0000000, size 10000000, flags 00
|
|---|
| 221 | PCI: base reg 3: host d0180000, pci d0180000, size 00040000, flags 00
|
|---|
| 222 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 223 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 224 | PCI: Capabilities: PM, vendspec, MSI
|
|---|
| 225 | PCI: [dom 0, bus 0] bus 0, device 27, function 0: vendor 8086, device 811b, revision 07
|
|---|
| 226 | PCI: class_base 04, class_function 03, class_api 00
|
|---|
| 227 | PCI: vendor 8086: Intel Corporation
|
|---|
| 228 | PCI: device 811b: US15W/US15X/US15L/UL11L SCH [Poulsbo] HD Audio Controller
|
|---|
| 229 | PCI: info: Multimedia controller (Audio device)
|
|---|
| 230 | PCI: line_size 10, latency 00, header_type 00, BIST 00
|
|---|
| 231 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 232 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 233 | PCI: interrupt_line 0a, interrupt_pin 01, min_grant 00, max_latency 00
|
|---|
| 234 | PCI: base reg 0: host 00000000d01c0000, pci 00000000d01c0000, size 00004000, flags 04 00
|
|---|
| 235 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 236 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 237 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 238 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 239 | PCI: Capabilities: PM, PCIe
|
|---|
| 240 | PCI: Extended capabilities: Virtual Channel, Root Complex Link Declaration
|
|---|
| 241 | PCI: [dom 0, bus 0] bus 0, device 28, function 0: vendor 8086, device 8110, revision 07
|
|---|
| 242 | PCI: class_base 06, class_function 04, class_api 00
|
|---|
| 243 | PCI: vendor 8086: Intel Corporation
|
|---|
| 244 | PCI: device 8110: US15W/US15X/US15L/UL11L SCH [Poulsbo] PCI Express Port 1
|
|---|
| 245 | PCI: info: Bridge (PCI bridge, Normal decode)
|
|---|
| 246 | PCI: line_size 10, latency 00, header_type 81, BIST 00
|
|---|
| 247 | PCI: subsystem_id 0000, subsystem_vendor_id 0040
|
|---|
| 248 | PCI: primary_bus 00, secondary_bus 02, subordinate_bus 02, secondary_latency 00
|
|---|
| 249 | PCI: I/O window f000-0fff
|
|---|
| 250 | PCI: memory window d0000000-d00fffff
|
|---|
| 251 | PCI: prefetchable memory window 00000000fff00000-00000000000fffff
|
|---|
| 252 | PCI: bridge_control 0007, secondary_status 0000
|
|---|
| 253 | PCI: interrupt_line 0b, interrupt_pin 01
|
|---|
| 254 | PCI: ROM base host 00000000, pci 00000000, size ??
|
|---|
| 255 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 256 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 257 | PCI: Capabilities: PCIe, subvendor, PM
|
|---|
| 258 | PCI: Extended capabilities: (empty list)
|
|---|
| 259 | PCI: [dom 0, bus 2] bus 2, device 0, function 0: vendor 168c, device 002a, revision 01
|
|---|
| 260 | PCI: class_base 02, class_function 80, class_api 00
|
|---|
| 261 | PCI: vendor 168c: Qualcomm Atheros
|
|---|
| 262 | PCI: device 002a: AR928X Wireless Network Adapter (PCI-Express)
|
|---|
| 263 | PCI: info: Network controller
|
|---|
| 264 | PCI: line_size 10, latency 00, header_type 00, BIST 00
|
|---|
| 265 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 266 | PCI: cardbus_CIS 00000000, subsystem_id d822, subsystem_vendor_id 1113
|
|---|
| 267 | PCI: interrupt_line 07, interrupt_pin 01, min_grant 00, max_latency 00
|
|---|
| 268 | PCI: base reg 0: host 00000000d0000000, pci 00000000d0000000, size 00010000, flags 04 00
|
|---|
| 269 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 270 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 271 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 272 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 273 | PCI: Capabilities: PM, MSI, PCIe, MSI-X
|
|---|
| 274 | PCI: Extended capabilities: Advanced Error Reporting, Virtual Channel, Serial Number
|
|---|
| 275 | PCI: [dom 0, bus 0] bus 0, device 29, function 0: vendor 8086, device 8114, revision 07
|
|---|
| 276 | PCI: class_base 0c, class_function 03, class_api 00
|
|---|
| 277 | PCI: vendor 8086: Intel Corporation
|
|---|
| 278 | PCI: device 8114: US15W/US15X/US15L/UL11L SCH [Poulsbo] USB UHCI Controller #1
|
|---|
| 279 | PCI: info: Serial bus controller (USB controller, UHCI)
|
|---|
| 280 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 281 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 282 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 283 | PCI: interrupt_line 0a, interrupt_pin 01, min_grant 00, max_latency 00
|
|---|
| 284 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 285 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 286 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 287 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 288 | PCI: base reg 4: host 00001820, pci 00001820, size 00000020, flags 01
|
|---|
| 289 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 290 | PCI: Capabilities: (not supported)
|
|---|
| 291 | PCI: [dom 0, bus 0] bus 0, device 29, function 1: vendor 8086, device 8115, revision 07
|
|---|
| 292 | PCI: class_base 0c, class_function 03, class_api 00
|
|---|
| 293 | PCI: vendor 8086: Intel Corporation
|
|---|
| 294 | PCI: device 8115: US15W/US15X/US15L/UL11L SCH [Poulsbo] USB UHCI Controller #2
|
|---|
| 295 | PCI: info: Serial bus controller (USB controller, UHCI)
|
|---|
| 296 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 297 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 298 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 299 | PCI: interrupt_line 05, interrupt_pin 02, min_grant 00, max_latency 00
|
|---|
| 300 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 301 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 302 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 303 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 304 | PCI: base reg 4: host 00001840, pci 00001840, size 00000020, flags 01
|
|---|
| 305 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 306 | PCI: Capabilities: (not supported)
|
|---|
| 307 | PCI: [dom 0, bus 0] bus 0, device 29, function 2: vendor 8086, device 8116, revision 07
|
|---|
| 308 | PCI: class_base 0c, class_function 03, class_api 00
|
|---|
| 309 | PCI: vendor 8086: Intel Corporation
|
|---|
| 310 | PCI: device 8116: US15W/US15X/US15L/UL11L SCH [Poulsbo] USB UHCI Controller #3
|
|---|
| 311 | PCI: info: Serial bus controller (USB controller, UHCI)
|
|---|
| 312 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 313 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 314 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 315 | PCI: interrupt_line 03, interrupt_pin 03, min_grant 00, max_latency 00
|
|---|
| 316 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 317 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 318 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 319 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 320 | PCI: base reg 4: host 00001860, pci 00001860, size 00000020, flags 01
|
|---|
| 321 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 322 | PCI: Capabilities: (not supported)
|
|---|
| 323 | PCI: [dom 0, bus 0] bus 0, device 29, function 7: vendor 8086, device 8117, revision 07
|
|---|
| 324 | PCI: class_base 0c, class_function 03, class_api 20
|
|---|
| 325 | PCI: vendor 8086: Intel Corporation
|
|---|
| 326 | PCI: device 8117: US15W/US15X/US15L/UL11L SCH [Poulsbo] USB EHCI Controller
|
|---|
| 327 | PCI: info: Serial bus controller (USB controller, EHCI)
|
|---|
| 328 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 329 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 330 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 331 | PCI: interrupt_line 0b, interrupt_pin 04, min_grant 00, max_latency 00
|
|---|
| 332 | PCI: base reg 0: host d03c4000, pci d03c4000, size 00000400, flags 00
|
|---|
| 333 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 334 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 335 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 336 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 337 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 338 | PCI: Capabilities: PM, DebugPort
|
|---|
| 339 | PCI: [dom 0, bus 0] bus 0, device 30, function 0: vendor 8086, device 811c, revision 07
|
|---|
| 340 | PCI: class_base 08, class_function 05, class_api 01
|
|---|
| 341 | PCI: vendor 8086: Intel Corporation
|
|---|
| 342 | PCI: device 811c: US15W/US15X/US15L/UL11L SCH [Poulsbo] SDIO/MMC Controller #1
|
|---|
| 343 | PCI: info: Generic system peripheral (SD Host controller)
|
|---|
| 344 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 345 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 346 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 347 | PCI: interrupt_line 0a, interrupt_pin 01, min_grant 00, max_latency 00
|
|---|
| 348 | PCI: base reg 0: host d03c4400, pci d03c4400, size 00000100, flags 00
|
|---|
| 349 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 350 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 351 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 352 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 353 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 354 | PCI: Capabilities: (not supported)
|
|---|
| 355 | PCI: [dom 0, bus 0] bus 0, device 31, function 0: vendor 8086, device 8119, revision 07
|
|---|
| 356 | PCI: class_base 06, class_function 01, class_api 00
|
|---|
| 357 | PCI: vendor 8086: Intel Corporation
|
|---|
| 358 | PCI: device 8119: US15W/US15X/US15L/UL11L SCH [Poulsbo] LPC Bridge
|
|---|
| 359 | PCI: info: Bridge (ISA bridge)
|
|---|
| 360 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 361 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 362 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 363 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 364 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 365 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 366 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 367 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 368 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 369 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 370 | PCI: Capabilities: (not supported)
|
|---|
| 371 | PCI: [dom 0, bus 0] bus 0, device 31, function 1: vendor 8086, device 811a, revision 07
|
|---|
| 372 | PCI: class_base 01, class_function 01, class_api 80
|
|---|
| 373 | PCI: vendor 8086: Intel Corporation
|
|---|
| 374 | PCI: device 811a: US15W/US15X/US15L/UL11L SCH [Poulsbo] IDE Controller
|
|---|
| 375 | PCI: info: Mass storage controller (IDE interface, ISA Compatibility mode-
|
|---|
| 376 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 377 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 378 | PCI: cardbus_CIS 00000000, subsystem_id 0001, subsystem_vendor_id 13b8
|
|---|
| 379 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 380 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 381 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 382 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 383 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 384 | PCI: base reg 4: host 00001810, pci 00001810, size 00000010, flags 01
|
|---|
| 385 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 386 | PCI: Capabilities: (not supported)
|
|---|
| 387 | ACPI: RSDP 0x00000000000F7960 000024 (v02 NOKIA )
|
|---|
| 388 | ACPI: XSDT 0x000000003F6BACD2 00006C (v01 NOKIA NOKIA001 06040000 LTP 00000000)
|
|---|
| 389 | ACPI: FACP 0x000000003F6BFC3A 0000F4 (v03 NOKIA NOKIA001 06040000 INTC 00000032)
|
|---|
| 390 | ACPI: DSDT 0x000000003F6BBBF7 003FCF (v01 NOKIA NOKIA001 06040000 INTL 20060608)
|
|---|
| 391 | ACPI: FACS 0x000000003F6C2FC0 000040
|
|---|
| 392 | ACPI: HPET 0x000000003F6BFD2E 000038 (v01 NOKIA NOKIA001 06040000 INTC 00000032)
|
|---|
| 393 | ACPI: MCFG 0x000000003F6BFD66 00003C (v01 NOKIA NOKIA001 06040000 INTC 00000032)
|
|---|
| 394 | ACPI: TCPA 0x000000003F6BFDA2 000032 (v01 NOKIA NOKIA001 06040000 PTL 00000001)
|
|---|
| 395 | ACPI: TMOR 0x000000003F6BFDD4 000026 (v01 NOKIA NOKIA001 06040000 PTL 00000003)
|
|---|
| 396 | ACPI: SLIC 0x000000003F6BFDFA 000176 (v01 NOKIA NOKIA001 06040000 LOHR 00000000)
|
|---|
| 397 | ACPI: APIC 0x000000003F6BFF70 000068 (v01 NOKIA NOKIA001 06040000 LTP 00000000)
|
|---|
| 398 | ACPI: BOOT 0x000000003F6BFFD8 000028 (v01 NOKIA NOKIA001 06040000 LTP 00000001)
|
|---|
| 399 | ACPI: SSDT 0x000000003F6BAD3E 0004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
|
|---|
| 400 | ACPI: Forced DSDT copy: length 0x03FCF copied locally, original unmapped
|
|---|
| 401 | ACPI: 2 ACPI AML tables successfully acquired and loaded
|
|---|
| 402 | ACPI: Enabled 12 GPEs in block 00 to 1F
|
|---|
| 403 | found io-apic with address 0xfec00000, global interrupt base 0, apic-id 2
|
|---|
| 404 | mapping io-apic 0 at physical address 0xfec00000
|
|---|
| 405 | io-apic 0 has range 0-23, 24 entries, version 0x00170020, apic-id 2
|
|---|
| 406 | setting ACPI interrupt model to APIC
|
|---|
| 407 | IRQ routing table with 9 entries
|
|---|
| 408 | address 0x2ffff; pin 0; GSI 16; pci 0:2 pin 1 func mask 1; bios irq: 7; gsi 16; config 0x06
|
|---|
| 409 | address 0x1bffff; pin 0; GSI 22; pci 0:27 pin 1 func mask 1; bios irq: 10; gsi 22; config 0x06
|
|---|
| 410 | address 0x1cffff; pin 0; GSI 17; pci 0:28 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06
|
|---|
| 411 | address 0x1dffff; pin 0; GSI 23; pci 0:29 pin 1 func mask 1; bios irq: 10; gsi 23; config 0x06
|
|---|
| 412 | address 0x1dffff; pin 1; GSI 19; pci 0:29 pin 2 func mask 2; bios irq: 5; gsi 19; config 0x06
|
|---|
| 413 | address 0x1dffff; pin 2; GSI 18; pci 0:29 pin 3 func mask 4; bios irq: 3; gsi 18; config 0x06
|
|---|
| 414 | address 0x1dffff; pin 3; GSI 21; pci 0:29 pin 4 func mask 80; bios irq: 11; gsi 21; config 0x06
|
|---|
| 415 | address 0x1effff; pin 0; GSI 22; pci 0:30 pin 1 func mask 1; bios irq: 10; gsi 22; config 0x06
|
|---|
| 416 | address 0xffff; pin 0; GSI 16; pci 2:0 pin 1 func mask 1; bios irq: 7; gsi 16; config 0x06
|
|---|
| 417 | found interrupt override for bus 0, source irq 0, global irq 2, flags 0x00000005
|
|---|
| 418 | found interrupt override for bus 0, source irq 9, global irq 9, flags 0x0000000d
|
|---|
| 419 | free_io_interrupt_vectors: freeing 16 vectors starting from 0
|
|---|
| 420 | reserve_io_interrupt_vectors: reserved 24 vectors starting from 0
|
|---|
| 421 | using io-apics for interrupt routing
|
|---|
| 422 | setting up apic for CPU 1: apic id 1, version 327700
|
|---|
| 423 | CPU 1: logical apic id: 0x2
|
|---|
| 424 | x86_init_fpu: CPU has SSE... enabling FXSR and XMM.
|
|---|
| 425 | initialize_commpage_syscall(): sysenter/sysexit supported
|
|---|
| 426 | allocate_commpage_entry(3, 5) -> 0x00000110
|
|---|
| 427 | allocate_commpage_entry(4, 42) -> 0x00000118
|
|---|
| 428 | allocate_commpage_entry(5, 74) -> 0x00000148
|
|---|
| 429 | allocate_commpage_entry(6, 78) -> 0x00000198
|
|---|
| 430 | allocate_commpage_entry(7, 97) -> 0x000001e8
|
|---|
| 431 | slab memory manager: created area 0x80801000 (265)
|
|---|
| 432 | publish device: node 0x82820cd0, path acpi/namespace, module bus_managers/acpi/namespace/device_v1
|
|---|
| 433 | registering power button
|
|---|
| 434 | publish device: node 0x82b8f3b0, path power/embedded_controller/0, module drivers/power/acpi_embedded_controller/device_v1
|
|---|
| 435 | usb xhci: no devices found
|
|---|
| 436 | usb uhci -1: successfully started the controller
|
|---|
| 437 | usb uhci -1: successfully started the controller
|
|---|
| 438 | usb uhci -1: successfully started the controller
|
|---|
| 439 | usb ohci: no devices found
|
|---|
| 440 | usb ehci -1: successfully took ownership of the host controller
|
|---|
| 441 | sitd entry size 64, itd entry size 128
|
|---|
| 442 | usb ehci -1: successfully started the controller
|
|---|
| 443 | usb hub 2: port 0: device removed
|
|---|
| 444 | usb hub 7: port 1: device removed
|
|---|
| 445 | usb hub 12: port 1: device removed
|
|---|
| 446 | usb hub 17: port 0: new device connected
|
|---|
| 447 | usb hub 17: port 3: new device connected
|
|---|
| 448 | usb hub 17: port 5: new device connected
|
|---|
| 449 | usb_disk: device reports a lun count of 1
|
|---|
| 450 | usb_disk: vendor_identification "Intenso "
|
|---|
| 451 | usb_disk: product_identification "Rainbow Line "
|
|---|
| 452 | usb_disk: product_revision_level "8.07"
|
|---|
| 453 | get_boot_partitions(): boot volume message:
|
|---|
| 454 | KMessage: buffer: 0x818e0d50 (size/capacity: 347/347), flags: 0xa
|
|---|
| 455 | field: "booted from image" (BOOL): false
|
|---|
| 456 | field: "partition offset" (LLNG): 4194304 (0x400000)
|
|---|
| 457 | field: "packaged" (BOOL): true
|
|---|
| 458 | field: "boot method" (LONG): 0 (0x0)
|
|---|
| 459 | field: "boot drive number" (LLNG): 128 (0x80)
|
|---|
| 460 | field: "disk identifier" (RAWT): data at 0x818e0e5c, 79 bytes
|
|---|
| 461 | get_boot_partitions(): boot method type: 0
|
|---|
| 462 | intel: ep_std_ops(0x1)
|
|---|
| 463 | intel: ep_std_ops(0x2)
|
|---|
| 464 | intel: pm_std_ops(0x1)
|
|---|
| 465 | intel: pm_std_ops(0x2)
|
|---|
| 466 | dos_std_ops()
|
|---|
| 467 | dos_std_ops()
|
|---|
| 468 | PCI-ATA: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
|
|---|
| 469 | PCI-ATA: init channel...
|
|---|
| 470 | PCI-ATA: channel index 0
|
|---|
| 471 | PCI-ATA: bus master base 0x1810
|
|---|
| 472 | PCI-ATA: init channel done
|
|---|
| 473 | ata 0: _DevicePresent: device 0, presence 1
|
|---|
| 474 | ata 0: _DevicePresent: device selection failed for device 1
|
|---|
| 475 | ata 0: deviceMask 1
|
|---|
| 476 | ata 0: probing device 0
|
|---|
| 477 | ata 0: signature of device 0: 0x0000
|
|---|
| 478 | ata 0-0: model number: TOSHIBA MK1235GSL
|
|---|
| 479 | ata 0-0: serial number: 99F7W9ILW
|
|---|
| 480 | ata 0-0: firmware rev.: PV010A
|
|---|
| 481 | ata 0-0: using DMA mode 0x15
|
|---|
| 482 | ata 0: identified ATA device 0
|
|---|
| 483 | ata 0: ignoring device 1
|
|---|
| 484 | ata 0 error: command failed, error bit is set. status 0x51, error 0x04
|
|---|
| 485 | publish device: node 0x82ba9970, path disk/ata/0/master/raw, module drivers/disk/scsi/scsi_disk/device_v1
|
|---|
| 486 | ata 0-0 error: invalid target lun 1 for ATA device
|
|---|
| 487 | ata 0-0 error: invalid target lun 2 for ATA device
|
|---|
| 488 | ata 0-0 error: invalid target lun 3 for ATA device
|
|---|
| 489 | ata 0-0 error: invalid target lun 4 for ATA device
|
|---|
| 490 | ata 0-0 error: invalid target lun 5 for ATA device
|
|---|
| 491 | ata 0-0 error: invalid target lun 6 for ATA device
|
|---|
| 492 | ata 0-0 error: invalid target lun 7 for ATA device
|
|---|
| 493 | ata 0 error: target device not present
|
|---|
| 494 | ata 0 error: invalid target device
|
|---|
| 495 | Last message repeated 12 times.
|
|---|
| 496 | PCI-ATA: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
|
|---|
| 497 | PCI-ATA: init channel...
|
|---|
| 498 | PCI-ATA: channel index 1
|
|---|
| 499 | PCI-ATA: bus master base 0x1818
|
|---|
| 500 | PCI-ATA: init channel done
|
|---|
| 501 | ata 1: _DevicePresent: device selection failed for device 0
|
|---|
| 502 | ata 1: _DevicePresent: device 1, presence 0
|
|---|
| 503 | ata 1: deviceMask 0
|
|---|
| 504 | ata 1: ignoring device 0
|
|---|
| 505 | ata 1: ignoring device 1
|
|---|
| 506 | ata 1 error: target device not present
|
|---|
| 507 | ata 1 error: target device not present
|
|---|
| 508 | ata 1 error: invalid target device
|
|---|
| 509 | Last message repeated 12 times.
|
|---|
| 510 | [33msdhci_pci:[0m supports_device(vid:8086 pid:811c)
|
|---|
| 511 | [33msdhci_pci:[0m SDHCI Device found! Subtype: 0x0005, type: 0x0008
|
|---|
| 512 | [33msdhci_pci:[0m CALLED status_t init_device(device_node*, void**)
|
|---|
| 513 | [33msdhci_pci:[0m CALLED status_t register_child_devices(void*)
|
|---|
| 514 | [33msdhci_pci:[0m register_child_devices: 0, 1
|
|---|
| 515 | [33msdhci_pci:[0m CALLED status_t init_bus(device_node*, void**)
|
|---|
| 516 | [33msdhci_pci:[0m Register SD bus at slot 1, using bar 0
|
|---|
| 517 | [33msdhci_pci:[0m irq interrupt line: 22
|
|---|
| 518 | [33msdhci_pci:[0m SDCLK frequency: 48MHz / 128 = 375kHz
|
|---|
| 519 | [33mmmc_bus:[0m CALLED status_t mmc_bus_added_device(device_node*)
|
|---|
| 520 | [33mmmc_bus:[0m CALLED status_t mmc_bus_init(device_node*, void**)
|
|---|
| 521 | [33mmmc_bus:[0m CALLED MMCBus::MMCBus(device_node*)
|
|---|
| 522 | [33msdhci_pci:[0m CALLED void set_scan_semaphore(void*, sem_id)
|
|---|
| 523 | [33mmmc_bus:[0m MMC bus object created
|
|---|
| 524 | [33mmmc_bus:[0m Reset the bus...
|
|---|
| 525 | [33msdhci_pci:[0m ExecuteCommand(0, 0)
|
|---|
| 526 | [33mmmc_disk:[0m CALLED float mmc_disk_supports_device(device_node*)
|
|---|
| 527 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 528 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 529 | [33msdhci_pci:[0m Wait for command complete...[33mmmc_disk:[0m Could not get device type
|
|---|
| 530 | [33msdhci_pci:[0m Command response available
|
|---|
| 531 | [33msdhci_pci:[0m Command execution 0 complete
|
|---|
| 532 | [33mmmc_bus:[0m CMD0 result: No error
|
|---|
| 533 | periph_check_capacity: TRIM: Setting trim support to disabled
|
|---|
| 534 | DMAResource@0x8280a880: low/high 0/100000000, max segment count 512, align 2, boundary 65536, max transfer 33553920, max segment size 33554432
|
|---|
| 535 | slab memory manager: created area 0xde001000 (602)
|
|---|
| 536 | slab memory manager: created area 0xdf001000 (603)
|
|---|
| 537 | [33mmmc_bus:[0m Scanning the bus
|
|---|
| 538 | [33msdhci_pci:[0m SDCLK frequency: 48MHz / 128 = 375kHz
|
|---|
| 539 | [33msdhci_pci:[0m CALLED void set_bus_width(void*, int)
|
|---|
| 540 | [33msdhci_pci:[0m ExecuteCommand(8, 1aa)
|
|---|
| 541 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 542 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 543 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 544 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 545 | [33msdhci_pci:[0m Command response available
|
|---|
| 546 | [33msdhci_pci:[0m Command execution 8 complete
|
|---|
| 547 | [33msdhci_pci:[0m ExecuteCommand(55, 0)
|
|---|
| 548 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 549 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 550 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 551 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 552 | [33msdhci_pci:[0m Command response available
|
|---|
| 553 | [33msdhci_pci:[0m Command execution 55 complete
|
|---|
| 554 | [33msdhci_pci:[0m ExecuteCommand(41, 40ff8000)
|
|---|
| 555 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 556 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 557 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 558 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 559 | [33msdhci_pci:[0m Command response available
|
|---|
| 560 | [33msdhci_pci:[0m Command execution 41 complete
|
|---|
| 561 | [33mmmc_bus:[0m Card is busy
|
|---|
| 562 | periph_check_capacity: TRIM: Setting trim support to disabled
|
|---|
| 563 | usb_disk: got device name "Intenso Rainbow Line 8.07": No error
|
|---|
| 564 | intel: ep_std_ops(0x1)
|
|---|
| 565 | intel: ep_std_ops(0x2)
|
|---|
| 566 | [33msdhci_pci:[0m ExecuteCommand(55, 0)
|
|---|
| 567 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 568 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 569 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 570 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 571 | [33msdhci_pci:[0m Command response available
|
|---|
| 572 | [33msdhci_pci:[0m Command execution 55 complete
|
|---|
| 573 | [33msdhci_pci:[0m ExecuteCommand(41, 40ff8000)
|
|---|
| 574 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 575 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 576 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 577 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 578 | [33msdhci_pci:[0m Command response available
|
|---|
| 579 | [33msdhci_pci:[0m Command execution 41 complete
|
|---|
| 580 | [33mmmc_bus:[0m Card is busy
|
|---|
| 581 | [33msdhci_pci:[0m ExecuteCommand(55, 0)
|
|---|
| 582 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 583 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 584 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 585 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 586 | [33msdhci_pci:[0m Command response available
|
|---|
| 587 | [33msdhci_pci:[0m Command execution 55 complete
|
|---|
| 588 | [33msdhci_pci:[0m ExecuteCommand(41, 40ff8000)
|
|---|
| 589 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 590 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 591 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 592 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 593 | [33msdhci_pci:[0m Command response available
|
|---|
| 594 | [33msdhci_pci:[0m Command execution 41 complete
|
|---|
| 595 | [33mmmc_bus:[0m Card is busy
|
|---|
| 596 | [33msdhci_pci:[0m ExecuteCommand(55, 0)
|
|---|
| 597 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 598 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 599 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 600 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 601 | [33msdhci_pci:[0m Command response available
|
|---|
| 602 | [33msdhci_pci:[0m Command execution 55 complete
|
|---|
| 603 | [33msdhci_pci:[0m ExecuteCommand(41, 40ff8000)
|
|---|
| 604 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 605 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 606 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 607 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 608 | [33msdhci_pci:[0m Command response available
|
|---|
| 609 | [33msdhci_pci:[0m Command execution 41 complete
|
|---|
| 610 | [33mmmc_bus:[0m Card is busy
|
|---|
| 611 | [33msdhci_pci:[0m ExecuteCommand(55, 0)
|
|---|
| 612 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 613 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 614 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 615 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 616 | [33msdhci_pci:[0m Command response available
|
|---|
| 617 | [33msdhci_pci:[0m Command execution 55 complete
|
|---|
| 618 | [33msdhci_pci:[0m ExecuteCommand(41, 40ff8000)
|
|---|
| 619 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 620 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 621 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 622 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 623 | [33msdhci_pci:[0m Command response available
|
|---|
| 624 | [33msdhci_pci:[0m Command execution 41 complete
|
|---|
| 625 | [33mmmc_bus:[0m Card is busy
|
|---|
| 626 | [33msdhci_pci:[0m ExecuteCommand(55, 0)
|
|---|
| 627 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 628 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 629 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 630 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 631 | [33msdhci_pci:[0m Command response available
|
|---|
| 632 | [33msdhci_pci:[0m Command execution 55 complete
|
|---|
| 633 | [33msdhci_pci:[0m ExecuteCommand(41, 40ff8000)
|
|---|
| 634 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 635 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 636 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 637 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 638 | [33msdhci_pci:[0m Command response available
|
|---|
| 639 | [33msdhci_pci:[0m Command execution 41 complete
|
|---|
| 640 | [33mmmc_bus:[0m Card is busy
|
|---|
| 641 | [33msdhci_pci:[0m ExecuteCommand(55, 0)
|
|---|
| 642 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 643 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 644 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 645 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 646 | [33msdhci_pci:[0m Command response available
|
|---|
| 647 | [33msdhci_pci:[0m Command execution 55 complete
|
|---|
| 648 | [33msdhci_pci:[0m ExecuteCommand(41, 40ff8000)
|
|---|
| 649 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 650 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 651 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 652 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 653 | [33msdhci_pci:[0m Command response available
|
|---|
| 654 | [33msdhci_pci:[0m Command execution 41 complete
|
|---|
| 655 | [33mmmc_bus:[0m Voltage range: ff8000
|
|---|
| 656 | [33msdhci_pci:[0m ExecuteCommand(2, 0)
|
|---|
| 657 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 658 | [33msdhci_pci:[0m real status = 0 command line busy: 1
|
|---|
| 659 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 660 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 661 | [33msdhci_pci:[0m Command response available
|
|---|
| 662 | [33msdhci_pci:[0m Command execution 2 complete
|
|---|
| 663 | [33msdhci_pci:[0m ExecuteCommand(3, 0)
|
|---|
| 664 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 665 | [33msdhci_pci:[0m interrupt function called 1
|
|---|
| 666 | [33msdhci_pci:[0m Command complete interrupt handled
|
|---|
| 667 | [33msdhci_pci:[0m real status = 0 command line busy: 0
|
|---|
| 668 | [33msdhci_pci:[0m Command response available
|
|---|
| 669 | [33msdhci_pci:[0m Command execution 3 complete
|
|---|
| 670 | [33mmmc_bus:[0m RCA: b368 Status: 520
|
|---|
| 671 | [33mmmc_disk:[0m CALLED float mmc_disk_supports_device(device_node*)
|
|---|
| 672 | [33mmmc_disk:[0m SDHC card found, parent: 0x82ba9f60
|
|---|
| 673 | [33mmmc_disk:[0m CALLED status_t mmc_disk_register_device(device_node*)
|
|---|
| 674 | [33mmmc_disk:[0m CALLED status_t mmc_disk_init_driver(device_node*, void**)
|
|---|
| 675 | [33mmmc_disk:[0m MMC bus handle: 0x8147a180 bus_managers/mmc/driver_v1
|
|---|
| 676 | DMAResource@0x8280a780: low/high 0/100000000, max segment count 1, align 512, boundary 524288, max transfer 18446744073709551615, max segment size 523776
|
|---|
| 677 | [33mmmc_disk:[0m MMC card device initialized for RCA b368
|
|---|
| 678 | [33mmmc_disk:[0m CALLED status_t mmc_disk_register_child_devices(void*)
|
|---|
| 679 | publish device: node 0x82ba9f10, path disk/mmc/0/raw, module drivers/disk/mmc/mmc_disk/device_v1
|
|---|
| 680 | [33msdhci_pci:[0m ExecuteCommand(2, 0)
|
|---|
| 681 | [33msdhci_pci:[0m Wait for command complete...[33msdhci_pci:[0m command complete sem acquired, status: 0
|
|---|
| 682 | [33msdhci_pci:[0m real status = 18000 command line busy: 1
|
|---|
| 683 | intel: pm_std_ops(0x1)
|
|---|
| 684 | intel: pm_identify_partition(0, 0: 0, 120034123776, 512)
|
|---|
| 685 | btrfs [3999360: 16] invalid superblock!
|
|---|
| 686 | [34mexfat:[0m invalid superblock!
|
|---|
| 687 | ntfs: error: identify_partition: boot signature doesn't match
|
|---|
| 688 | identify(0, 0x82b95110)
|
|---|
| 689 | raw_command:
|
|---|
| 690 | [34mext2:[0m invalid superblock!
|
|---|
| 691 | dos_std_ops()
|
|---|
| 692 | dos_std_ops()
|
|---|
| 693 | intel: pm_scan_partition(0, 0: 0, 120034123776, 512)
|
|---|
| 694 | intel: ep_std_ops(0x1)
|
|---|
| 695 | intel: ep_identify_partition(0, 1048576, 8388608000, 512)
|
|---|
| 696 | intel: ep_std_ops(0x2)
|
|---|
| 697 | intel: pm_identify_partition(0, 2: 1048576, 8388608000, 512)
|
|---|
| 698 | btrfs [4060927: 16] invalid superblock!
|
|---|
| 699 | [34mexfat:[0m invalid superblock!
|
|---|
| 700 | identify(0, 0x82b950b0)
|
|---|
| 701 | raw_command:
|
|---|
| 702 | [34mext2:[0m invalid superblock!
|
|---|
| 703 | dos_std_ops()
|
|---|
| 704 | dos_std_ops()
|
|---|
| 705 | intel: ep_std_ops(0x1)
|
|---|
| 706 | intel: ep_identify_partition(0, 8389656576, 65689092096, 512)
|
|---|
| 707 | intel: ep_std_ops(0x2)
|
|---|
| 708 | intel: pm_identify_partition(0, 3: 8389656576, 65689092096, 512)
|
|---|
| 709 | btrfs [4116477: 16] invalid superblock!
|
|---|
| 710 | [34mexfat:[0m invalid superblock!
|
|---|
| 711 | identify(0, 0x82b95050)
|
|---|
| 712 | raw_command:
|
|---|
| 713 | [34mext2:[0m invalid superblock!
|
|---|
| 714 | dos_std_ops()
|
|---|
| 715 | dos_std_ops()
|
|---|
| 716 | intel: ep_std_ops(0x1)
|
|---|
| 717 | intel: ep_identify_partition(0, 74079796224, 45952795648, 512)
|
|---|
| 718 | intel: pm_identify_partition(0, 4: 74079796224, 45952795648, 512)
|
|---|
| 719 | btrfs [4264902: 16] invalid superblock!
|
|---|
| 720 | [34mexfat:[0m invalid superblock!
|
|---|
| 721 | ntfs: error: identify_partition: boot signature doesn't match
|
|---|
| 722 | identify(0, 0x82b95050)
|
|---|
| 723 | raw_command:
|
|---|
| 724 | [34mext2:[0m invalid superblock!
|
|---|
| 725 | dos_std_ops()
|
|---|
| 726 | dos_std_ops()
|
|---|
| 727 | intel: ep_scan_partition(0, 74079796224, 45952795648, 512)
|
|---|
| 728 | intel: ep_identify_partition(0, 77015810048, 43016781824, 512)
|
|---|
| 729 | intel: pm_identify_partition(0, 5: 77015810048, 43016781824, 512)
|
|---|
| 730 | btrfs [4279970: 16] invalid superblock!
|
|---|
| 731 | [34mexfat:[0m invalid superblock!
|
|---|
| 732 | ntfs: error: identify_partition: boot signature doesn't match
|
|---|
| 733 | identify(0, 0x80dfefb0)
|
|---|
| 734 | raw_command:
|
|---|
| 735 | dos_std_ops()
|
|---|
| 736 | dos_std_ops()
|
|---|
| 737 | intel: ep_identify_partition(0, 74079797248, 2760900608, 512)
|
|---|
| 738 | intel: pm_identify_partition(0, 6: 74079797248, 2760900608, 512)
|
|---|
| 739 | btrfs [4299872: 16] invalid superblock!
|
|---|
| 740 | [34mexfat:[0m invalid superblock!
|
|---|
| 741 | ntfs: error: identify_partition: boot signature doesn't match
|
|---|
| 742 | identify(0, 0x80dfef90)
|
|---|
| 743 | raw_command:
|
|---|
| 744 | [34mext2:[0m invalid superblock!
|
|---|
| 745 | dos_std_ops()
|
|---|
| 746 | dos_std_ops()
|
|---|
| 747 | intel: ep_identify_partition(0, 76841746432, 171966464, 512)
|
|---|
| 748 | intel: pm_identify_partition(0, 7: 76841746432, 171966464, 512)
|
|---|
| 749 | btrfs [4365171: 16] invalid superblock!
|
|---|
| 750 | [34mexfat:[0m invalid superblock!
|
|---|
| 751 | ntfs: error: identify_partition: boot signature doesn't match
|
|---|
| 752 | identify(0, 0x80dfef90)
|
|---|
| 753 | raw_command:
|
|---|
| 754 | [34mext2:[0m invalid superblock!
|
|---|
| 755 | dos_std_ops()
|
|---|
| 756 | dos_std_ops()
|
|---|
| 757 | intel: pm_identify_partition(0, 1: 0, 33554432000, 512)
|
|---|
| 758 | btrfs [4385929: 16] invalid superblock!
|
|---|
| 759 | [34mexfat:[0m invalid superblock!
|
|---|
| 760 | ntfs: error: identify_partition: boot signature doesn't match
|
|---|
| 761 | identify(0, 0x82b95270)
|
|---|
| 762 | found primary descriptor
|
|---|
| 763 | iso9660_primary_descriptor:
|
|---|
| 764 | volume descriptor type: 1 (primary)
|
|---|
| 765 | standard identifier: CD001 (valid)
|
|---|
| 766 | version: 1
|
|---|
| 767 | identifier: 'haiku-nightly-x86 '
|
|---|
| 768 | size: 1625
|
|---|
| 769 | set size: 1
|
|---|
| 770 | sequence number: 1
|
|---|
| 771 | logical block size: 2048
|
|---|
| 772 | path table size: 10
|
|---|
| 773 | set identifier:
|
|---|
| 774 | root directory record:
|
|---|
| 775 | length: 34
|
|---|
| 776 | location: 20
|
|---|
| 777 | data length: 2048
|
|---|
| 778 | volume space: 1
|
|---|
| 779 | iso9660_info::set_string(0x82b95270 ('<NULL>'), 'haiku-nightly-x86 ', 17)
|
|---|
| 780 | usb_disk: unhandled ioctl 10102
|
|---|
| 781 | [34mext2:[0m invalid superblock!
|
|---|
| 782 | dos_std_ops()
|
|---|
| 783 | dos_std_ops()
|
|---|
| 784 | intel: pm_scan_partition(0, 1: 0, 33554432000, 512)
|
|---|
| 785 | intel: ep_identify_partition(0, 4194304, 964689920, 512)
|
|---|
| 786 | intel: pm_identify_partition(0, 8: 4194304, 964689920, 512)
|
|---|
| 787 | btrfs [4408055: 16] invalid superblock!
|
|---|
| 788 | [34mexfat:[0m invalid superblock!
|
|---|
| 789 | ntfs: error: identify_partition: boot signature doesn't match
|
|---|
| 790 | identify(0, 0x80dfef90)
|
|---|
| 791 | usb_disk: unhandled ioctl 10102
|
|---|
| 792 | [34mext2:[0m invalid superblock!
|
|---|
| 793 | dos_std_ops()
|
|---|
| 794 | dos_std_ops()
|
|---|
| 795 | device 0: /dev/disk/ata/0/master/raw
|
|---|
| 796 | media status: No error
|
|---|
| 797 | device flags: 2
|
|---|
| 798 | offset: 0
|
|---|
| 799 | size: 120034123776 (114473.46 MB)
|
|---|
| 800 | content size: 120034123776
|
|---|
| 801 | block size: 512
|
|---|
| 802 | child count: 3
|
|---|
| 803 | index: -1
|
|---|
| 804 | status: 0
|
|---|
| 805 | flags: 5
|
|---|
| 806 | volume: -1
|
|---|
| 807 | disk system: partitioning_systems/intel/map/v1
|
|---|
| 808 | name: TOSHIBA MK1235GSL
|
|---|
| 809 | content name: <NULL>
|
|---|
| 810 | type: <NULL>
|
|---|
| 811 | content type: Intel Partition Map
|
|---|
| 812 | params: <NULL>
|
|---|
| 813 | content params: <NULL>
|
|---|
| 814 | partition 2: /dev/disk/ata/0/master/0
|
|---|
| 815 | offset: 1048576
|
|---|
| 816 | size: 8388608000 (8000 MB)
|
|---|
| 817 | content size: 8388607488
|
|---|
| 818 | block size: 512
|
|---|
| 819 | child count: 0
|
|---|
| 820 | index: 0
|
|---|
| 821 | status: 0
|
|---|
| 822 | flags: 2
|
|---|
| 823 | volume: -1
|
|---|
| 824 | disk system: file_systems/ntfs/v1
|
|---|
| 825 | name: <NULL>
|
|---|
| 826 | content name: System
|
|---|
| 827 | type: Windows NT, OS/2 IFS, Advanced Unix
|
|---|
| 828 | content type: NT File System
|
|---|
| 829 | params: type = 7 ; active = 1
|
|---|
| 830 | content params: <NULL>
|
|---|
| 831 | partition 3: /dev/disk/ata/0/master/1
|
|---|
| 832 | offset: 8389656576
|
|---|
| 833 | size: 65689092096 (62646 MB)
|
|---|
| 834 | content size: 65689091584
|
|---|
| 835 | block size: 512
|
|---|
| 836 | child count: 0
|
|---|
| 837 | index: 1
|
|---|
| 838 | status: 0
|
|---|
| 839 | flags: 2
|
|---|
| 840 | volume: -1
|
|---|
| 841 | disk system: file_systems/ntfs/v1
|
|---|
| 842 | name: <NULL>
|
|---|
| 843 | content name: Local Disk
|
|---|
| 844 | type: Windows NT, OS/2 IFS, Advanced Unix
|
|---|
| 845 | content type: NT File System
|
|---|
| 846 | params: type = 7 ; active = 0
|
|---|
| 847 | content params: <NULL>
|
|---|
| 848 | partition 4: /dev/disk/ata/0/master/2
|
|---|
| 849 | offset: 74079796224
|
|---|
| 850 | size: 45952795648 (43824 MB)
|
|---|
| 851 | content size: 45952795648
|
|---|
| 852 | block size: 512
|
|---|
| 853 | child count: 3
|
|---|
| 854 | index: 2
|
|---|
| 855 | status: 0
|
|---|
| 856 | flags: 4
|
|---|
| 857 | volume: -1
|
|---|
| 858 | disk system: partitioning_systems/intel/extended/v1
|
|---|
| 859 | name: <NULL>
|
|---|
| 860 | content name: <NULL>
|
|---|
| 861 | type: Intel Extended Partition
|
|---|
| 862 | content type: Intel Extended Partition
|
|---|
| 863 | params: type = 15 ; active = 0
|
|---|
| 864 | content params: <NULL>
|
|---|
| 865 | partition 5: /dev/disk/ata/0/master/2_0
|
|---|
| 866 | offset: 77015810048
|
|---|
| 867 | size: 43016781824 (41024 MB)
|
|---|
| 868 | content size: 43016781824
|
|---|
| 869 | block size: 4096
|
|---|
| 870 | child count: 0
|
|---|
| 871 | index: 0
|
|---|
| 872 | status: 0
|
|---|
| 873 | flags: 2
|
|---|
| 874 | volume: -1
|
|---|
| 875 | disk system: file_systems/ext2/v1
|
|---|
| 876 | name: <NULL>
|
|---|
| 877 | content name:
|
|---|
| 878 | type: Linux native
|
|---|
| 879 | content type: Ext2 File System
|
|---|
| 880 | params: active false ;
|
|---|
| 881 | partition_table_offset 74079796224 ;
|
|---|
| 882 |
|
|---|
| 883 | content params: <NULL>
|
|---|
| 884 | partition 6: /dev/disk/ata/0/master/2_1
|
|---|
| 885 | offset: 74079797248
|
|---|
| 886 | size: 2760900608 (2633 MB)
|
|---|
| 887 | content size: 2760900608
|
|---|
| 888 | block size: 2048
|
|---|
| 889 | child count: 0
|
|---|
| 890 | index: 1
|
|---|
| 891 | status: 0
|
|---|
| 892 | flags: 2
|
|---|
| 893 | volume: -1
|
|---|
| 894 | disk system: file_systems/bfs/v1
|
|---|
| 895 | name: <NULL>
|
|---|
| 896 | content name: Haiku
|
|---|
| 897 | type: Linux native
|
|---|
| 898 | content type: Be File System
|
|---|
| 899 | params: active false ;
|
|---|
| 900 | partition_table_offset 74079796736 ;
|
|---|
| 901 |
|
|---|
| 902 | content params: <NULL>
|
|---|
| 903 | partition 7: /dev/disk/ata/0/master/2_2
|
|---|
| 904 | offset: 76841746432
|
|---|
| 905 | size: 171966464 (164 MB)
|
|---|
| 906 | content size: 0
|
|---|
| 907 | block size: 512
|
|---|
| 908 | child count: 0
|
|---|
| 909 | index: 2
|
|---|
| 910 | status: 2
|
|---|
| 911 | flags: 0
|
|---|
| 912 | volume: -1
|
|---|
| 913 | disk system: <NULL>
|
|---|
| 914 | name: <NULL>
|
|---|
| 915 | content name: <NULL>
|
|---|
| 916 | type: Linux swap
|
|---|
| 917 | content type: <NULL>
|
|---|
| 918 | params: active false ;
|
|---|
| 919 | partition_table_offset 76840697856 ;
|
|---|
| 920 |
|
|---|
| 921 | content params: <NULL>
|
|---|
| 922 | device 1: /dev/disk/usb/0/0/raw
|
|---|
| 923 | media status: No error
|
|---|
| 924 | device flags: 3
|
|---|
| 925 | offset: 0
|
|---|
| 926 | size: 33554432000 (32000 MB)
|
|---|
| 927 | content size: 33554432000
|
|---|
| 928 | block size: 512
|
|---|
| 929 | child count: 1
|
|---|
| 930 | index: -1
|
|---|
| 931 | status: 0
|
|---|
| 932 | flags: 5
|
|---|
| 933 | volume: -1
|
|---|
| 934 | disk system: partitioning_systems/intel/map/v1
|
|---|
| 935 | name: Intenso Rainbow Line 8.07
|
|---|
| 936 | content name: <NULL>
|
|---|
| 937 | type: <NULL>
|
|---|
| 938 | content type: Intel Partition Map
|
|---|
| 939 | params: <NULL>
|
|---|
| 940 | content params: <NULL>
|
|---|
| 941 | partition 8: /dev/disk/usb/0/0/0
|
|---|
| 942 | offset: 4194304
|
|---|
| 943 | size: 964689920 (920 MB)
|
|---|
| 944 | content size: 964689920
|
|---|
| 945 | block size: 2048
|
|---|
| 946 | child count: 0
|
|---|
| 947 | index: 0
|
|---|
| 948 | status: 0
|
|---|
| 949 | flags: 2
|
|---|
| 950 | volume: -1
|
|---|
| 951 | disk system: file_systems/bfs/v1
|
|---|
| 952 | name: <NULL>
|
|---|
| 953 | content name: Haiku
|
|---|
| 954 | type: Be File System
|
|---|
| 955 | content type: Be File System
|
|---|
| 956 | params: type = 235 ; active = 1
|
|---|
| 957 | content params: <NULL>
|
|---|
| 958 | Identified boot partition by partition offset.
|
|---|
| 959 | bfs: mounted "Haiku" (root node at 131072, device = /dev/disk/usb/0/0/0)
|
|---|
| 960 | Mounted boot partition: /dev/disk/usb/0/0/0
|
|---|
| 961 | unknown [4492902: 16] Adding packages from "/boot/system/packages"
|
|---|
| 962 | unknown [4493192: 16] Failed to open packages activation file: No such file or directory
|
|---|
| 963 | unknown [4493507: 16] Loading packages from activation file failed. Loading all packages in packages directory.
|
|---|
| 964 | slab memory manager: created area 0xdf801000 (668)
|
|---|
| 965 | unknown [6971749: 16] StringPool usage:
|
|---|
| 966 | unknown [6971910: 16] total unique strings: 10410, 113527 bytes, overhead: 156150 bytes
|
|---|
| 967 | unknown [6972240: 16] total strings with dups: 77524, 837119 bytes
|
|---|
| 968 | unknown [6972494: 16] unshared strings: 902
|
|---|
| 969 | unknown [6972695: 16] bytes saved: 567442
|
|---|
| 970 | unknown [6984797: 16] Adding packages from "/boot/home/config/packages"
|
|---|
| 971 | unknown [6985075: 16] Failed to open packages activation file: No such file or directory
|
|---|
| 972 | unknown [6985378: 16] Loading packages from activation file failed. Loading all packages in packages directory.
|
|---|
| 973 | unknown [6992846: 16] StringPool usage:
|
|---|
| 974 | unknown [6993004: 16] total unique strings: 10410, 113527 bytes, overhead: 156150 bytes
|
|---|
| 975 | unknown [6993334: 16] total strings with dups: 77535, 837184 bytes
|
|---|
| 976 | unknown [6993588: 16] unshared strings: 898
|
|---|
| 977 | unknown [6993789: 16] bytes saved: 567507
|
|---|
| 978 | module_init_post_boot_device() failed to normalize path of module image 0x8280e618, "ntfs"
|
|---|
| 979 | module_init_post_boot_device() failed to normalize path of module image 0x8280e870, "ext2"
|
|---|
| 980 | module: Search for file_cache/launch_speedup/v1 failed.
|
|---|
| 981 | smbios_scan
|
|---|
| 982 | found System Information at 0x829ff82f
|
|---|
| 983 | found vendor 1 product 2
|
|---|
| 984 | smbios_scan found vendor Nokia product Nokia Booklet 3G
|
|---|
| 985 | publish device: node 0x82b8ca30, path disk/virtual/ram/control, module drivers/disk/virtual/ram_disk/control/device_v1
|
|---|
| 986 | loaded driver /boot/system/add-ons/kernel/drivers/dev/null
|
|---|
| 987 | loaded driver /boot/system/add-ons/kernel/drivers/dev/tty
|
|---|
| 988 | usb_modeswitch: init_hardware()
|
|---|
| 989 | usb_modeswitch: init_driver()
|
|---|
| 990 | usb_modeswitch: trying module bus_managers/usb/v3
|
|---|
| 991 | usb_modeswitch: device_added(0x0000001d)
|
|---|
| 992 | usb_modeswitch: device switched: 0x82b8c8f0
|
|---|
| 993 | usb_modeswitch: acquire_sem failed while waiting for data transfer
|
|---|
| 994 | usb_modeswitch: receive response 1 failed 0x8000000c
|
|---|
| 995 | usb_modeswitch: publish_devices()
|
|---|
| 996 | usb_modeswitch: uninit_driver()
|
|---|
| 997 | loaded driver /boot/system/add-ons/kernel/drivers/dev/usb_modeswitch
|
|---|
| 998 | con_init: trying module console/frame_buffer/v1
|
|---|
| 999 | loaded driver /boot/system/add-ons/kernel/drivers/dev/console
|
|---|
| 1000 | loaded driver /boot/system/add-ons/kernel/drivers/dev/dprintf
|
|---|
| 1001 | loaded driver /boot/system/add-ons/kernel/drivers/dev/zero
|
|---|
| 1002 | config_manager: driver module: init
|
|---|
| 1003 | driver_get_next_device_info(bus = 0, cookie = 0)
|
|---|
| 1004 | loaded driver /boot/system/add-ons/kernel/drivers/dev/disk/floppy/pc_floppy
|
|---|
| 1005 | [33mmmc_disk:[0m CALLED status_t mmc_block_init_device(void*, void**)
|
|---|
| 1006 | [33mmmc_disk:[0m CALLED status_t mmc_block_open(void*, const char*, int, void**)
|
|---|
| 1007 | [33mmmc_disk:[0m Get geometry
|
|---|
| 1008 | [33mmmc_bus:[0m In mmc_bus_execute_command
|
|---|
