1 | APM version 1.2 available, flags 3.
|
---|
2 | smp: using ACPI to detect MP configuration
|
---|
3 | smp: Failed to find MADT!
|
---|
4 | smp_mp_probe: entry base 0x9fc00, limit 0xa0000
|
---|
5 | smp_mp_probe: entry base 0xf0000, limit 0x100000
|
---|
6 | VESA version = 2.0
|
---|
7 | OEM string: S3 Incorporated. 86C362
|
---|
8 | 109: 132 x 25 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
|
---|
9 | 10a: 132 x 43 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
|
---|
10 | 12e: 320 x 200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
11 | 10d: 320 x 200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
12 | 10e: 320 x 200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
13 | 128: 320 x 200 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
14 | 10f: 320 x 200 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
15 | 131: 320 x 240 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
16 | 132: 320 x 240 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
17 | 133: 320 x 240 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
18 | 135: 320 x 240 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
19 | 134: 320 x 240 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
20 | 141: 400 x 300 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
21 | 142: 400 x 300 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
22 | 143: 400 x 300 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
23 | 145: 400 x 300 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
24 | 144: 400 x 300 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
25 | 151: 512 x 384 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
26 | 152: 512 x 384 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
27 | 153: 512 x 384 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
28 | 155: 512 x 384 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
29 | 154: 512 x 384 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
30 | 100: 640 x 400 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
31 | 11c: 640 x 400 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
32 | 11d: 640 x 400 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
33 | 129: 640 x 400 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
34 | 11e: 640 x 400 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
35 | 101: 640 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
36 | 110: 640 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
37 | 111: 640 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
38 | 12a: 640 x 480 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
39 | 112: 640 x 480 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
40 | 171: 720 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
41 | 172: 720 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
42 | 173: 720 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
43 | 17c: 720 x 576 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
44 | 17d: 720 x 576 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
45 | 17e: 720 x 576 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
46 | 102: 800 x 600 x 4 (a = 31, mem = 3, phy = 0, p = 4, b = 1)
|
---|
47 | 103: 800 x 600 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
48 | 113: 800 x 600 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
49 | 114: 800 x 600 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
50 | 12b: 800 x 600 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
51 | 115: 800 x 600 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
52 | 104: 1024 x 768 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
|
---|
53 | 105: 1024 x 768 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
54 | 116: 1024 x 768 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
55 | 117: 1024 x 768 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
56 | 12c: 1024 x 768 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
57 | 118: 1024 x 768 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
58 | 161: 1152 x 864 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
59 | 162: 1152 x 864 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
60 | 163: 1152 x 864 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
61 | 165: 1152 x 864 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
62 | 164: 1152 x 864 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
63 | 106: 1280 x 1024 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
|
---|
64 | 107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
65 | 119: 1280 x 1024 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
66 | 11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
67 | 12d: 1280 x 1024 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
68 | 120: 1600 x 1200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
---|
69 | 121: 1600 x 1200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
70 | 122: 1600 x 1200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
---|
71 | VESA compatible graphics!
|
---|
72 | Welcome to the Haiku boot loader!
|
---|
73 | number of drives: 2
|
---|
74 | add_partitions_for(0x00105450, mountFS = no)
|
---|
75 | add_partitions_for(fd = 0, mountFS = no)
|
---|
76 | 0x0010565c Partition::Partition
|
---|
77 | 0x0010565c Partition::Scan()
|
---|
78 | check for partitioning_system: Amiga Partition Map
|
---|
79 | check for partitioning_system: EFI GUID Partition Map
|
---|
80 | check for partitioning_system: Intel Partition Map
|
---|
81 | priority: 810
|
---|
82 | check for partitioning_system: Intel Extended Partition
|
---|
83 | check for partitioning_system: Apple Partition Map
|
---|
84 | fatfs: cannot mount (bad superblock ?)
|
---|
85 | 0x001057b0 Partition::Partition
|
---|
86 | 0x0010565c Partition::AddChild 0x001057b0
|
---|
87 | 0x001057b0 Partition::SetParent 0x0010565c
|
---|
88 | new child partition!
|
---|
89 | 0x0010565c Partition::Scan(): scan child 0x001057b0 (start = 8225280, size = 4318272000, parent = 0x0010565c)!
|
---|
90 | 0x001057b0 Partition::Scan()
|
---|
91 | check for partitioning_system: Amiga Partition Map
|
---|
92 | check for partitioning_system: EFI GUID Partition Map
|
---|
93 | check for partitioning_system: Intel Partition Map
|
---|
94 | check for partitioning_system: Intel Extended Partition
|
---|
95 | check for partitioning_system: Apple Partition Map
|
---|
96 | fatfs: cannot mount (bad superblock ?)
|
---|
97 | 0x0010565c Partition::~Partition
|
---|
98 | 0x001057b0 Partition::SetParent 0x00000000
|
---|
99 | boot partition offset: 8225280
|
---|
100 | 0x001057b0 Partition::_Mount check for file_system: BFS Filesystem
|
---|
101 | load kernel...
|
---|
102 | video mode: 1024x768x32
|
---|
103 | ÿheap_add_area: area -1 added to small heap 0x80f76000 - usable range 0x80f7a000 - 0x81176000
|
---|
104 | heap_add_area: area -1 added to medium heap 0x81176000 - usable range 0x81177000 - 0x812a9000
|
---|
105 | heap_add_area: area -1 added to large heap 0x812a9333 - usable range 0x812aa000 - 0x81376000
|
---|
106 | slab: init base 0x81376000 + 0x2000
|
---|
107 | no local apic available
|
---|
108 | initialize_commpage_syscall(): sysenter/sysexit supported
|
---|
109 | allocate_commpage_entry(3, 5) -> 0xffff0100
|
---|
110 | arch_init_timer: using PIT timer.
|
---|
111 | allocate_commpage_entry(2, 12) -> 0xffff0108
|
---|
112 | apm_init()
|
---|
113 | code32: 0xf000, 0x76e0, length 0x92c6
|
---|
114 | code16: 0xf000, length 0x4166
|
---|
115 | data: 0xfdc7, length 0x6feb
|
---|
116 | heap_add_area: area -1 added to grow heap 0x80300000 - usable range 0x80302000 - 0x80400000
|
---|
117 | heap_add_area: area 243 added to medium heap 0x81176000 - usable range 0x82001000 - 0x82400000
|
---|
118 | heap_add_area: area 244 added to large heap 0x812a9333 - usable range 0x82401000 - 0x82800000
|
---|
119 | heap_add_area: area -1 added to VIP I/O heap heap 0x80400000 - usable range 0x80402000 - 0x80500000
|
---|
120 | vip_io_request_allocator_init(): created VIP I/O heap: 0x80400000
|
---|
121 | PCI: pci_module_init
|
---|
122 | PCI: mechanism 1 controller found
|
---|
123 | PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0008 to 0x000b
|
---|
124 | PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7180, revision 03
|
---|
125 | PCI: class_base 06, class_function 00, class_api 00
|
---|
126 | PCI: vendor 8086: Intel Corporation
|
---|
127 | PCI: device 7180: 440LX/EX - 82443LX/EX Host bridge
|
---|
128 | PCI: info: Bridge (Host bridge)
|
---|
129 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
---|
130 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
---|
131 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
---|
132 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
---|
133 | PCI: base reg 0: host e7800000, pci e7800000, size 00400000, flags 08
|
---|
134 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
135 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
136 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
137 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
138 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
139 | PCI: Capabilities: AGP
|
---|
140 | PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7181, revision 03
|
---|
141 | PCI: class_base 06, class_function 04, class_api 00
|
---|
142 | PCI: vendor 8086: Intel Corporation
|
---|
143 | PCI: device 7181: 440LX/EX - 82443LX/EX AGP bridge
|
---|
144 | PCI: info: Bridge (PCI bridge, Normal decode)
|
---|
145 | PCI: line_size 00, latency 40, header_type 01, BIST 00
|
---|
146 | PCI: subsystem_id 0000, subsystem_vendor_id 0000
|
---|
147 | PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 40
|
---|
148 | PCI: io_base_upper_16 0000, io_base e0
|
---|
149 | PCI: io_limit_upper_16 0000, io_limit d0
|
---|
150 | PCI: memory_base e000, memory_limit e760
|
---|
151 | PCI: prefetchable_memory_base_upper32 00000000, prefetchable_memory_base e770
|
---|
152 | PCI: prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit e770
|
---|
153 | PCI: bridge_control 000b, secondary_status 02a0
|
---|
154 | PCI: interrupt_line 00, interrupt_pin 00
|
---|
155 | PCI: ROM base host 00000000, pci 00000000, size ??
|
---|
156 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
157 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
158 | PCI: Capabilities: (not supported)
|
---|
159 | PCI: [dom 0, bus 1] bus 1, device 0, function 0: vendor 5333, device 8a13, revision 02
|
---|
160 | PCI: class_base 03, class_function 00, class_api 00
|
---|
161 | PCI: vendor 5333: S3 Inc.
|
---|
162 | PCI: device 8a13: 86c368 [Trio 3D/2X] (Trio3D/2X)
|
---|
163 | PCI: info: Display controller (VGA compatible controller, VGA controller)
|
---|
164 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
---|
165 | PCI: ROM base host e77f0000, pci e77f0000, size 00010000
|
---|
166 | PCI: cardbus_CIS 00000000, subsystem_id 8a13, subsystem_vendor_id 5333
|
---|
167 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 04, max_latency ff
|
---|
168 | PCI: base reg 0: host e0000000, pci e0000000, size 04000000, flags 00
|
---|
169 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
170 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
171 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
172 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
173 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
174 | PCI: Capabilities: PM, AGP
|
---|
175 | PCI: [dom 0, bus 0] bus 0, device 4, function 0: vendor 8086, device 7110, revision 02
|
---|
176 | PCI: class_base 06, class_function 01, class_api 00
|
---|
177 | PCI: vendor 8086: Intel Corporation
|
---|
178 | PCI: device 7110: 82371AB/EB/MB PIIX4 ISA
|
---|
179 | PCI: info: Bridge (ISA bridge)
|
---|
180 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
---|
181 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
---|
182 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
---|
183 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
---|
184 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
185 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
186 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
187 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
188 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
189 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
190 | PCI: Capabilities: (not supported)
|
---|
191 | PCI: [dom 0, bus 0] bus 0, device 4, function 1: vendor 8086, device 7111, revision 01
|
---|
192 | PCI: class_base 01, class_function 01, class_api 80
|
---|
193 | PCI: vendor 8086: Intel Corporation
|
---|
194 | PCI: device 7111: 82371AB/EB/MB PIIX4 IDE
|
---|
195 | PCI: info: Mass storage controller (IDE interface)
|
---|
196 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
---|
197 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
---|
198 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
---|
199 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
---|
200 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
201 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
202 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
203 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
204 | PCI: base reg 4: host 0000d800, pci 0000d800, size 00000010, flags 01
|
---|
205 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
206 | PCI: Capabilities: (not supported)
|
---|
207 | PCI: [dom 0, bus 0] bus 0, device 4, function 2: vendor 8086, device 7112, revision 01
|
---|
208 | PCI: class_base 0c, class_function 03, class_api 00
|
---|
209 | PCI: vendor 8086: Intel Corporation
|
---|
210 | PCI: device 7112: 82371AB/EB/MB PIIX4 USB
|
---|
211 | PCI: info: Serial bus controller (USB Controller, UHCI)
|
---|
212 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
---|
213 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
---|
214 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
---|
215 | PCI: interrupt_line 0a, interrupt_pin 04, min_grant 00, max_latency 00
|
---|
216 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
217 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
218 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
219 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
220 | PCI: base reg 4: host 0000d400, pci 0000d400, size 00000020, flags 01
|
---|
221 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
222 | PCI: Capabilities: (not supported)
|
---|
223 | PCI: [dom 0, bus 0] bus 0, device 4, function 3: vendor 8086, device 7113, revision 02
|
---|
224 | PCI: class_base 06, class_function 80, class_api 00
|
---|
225 | PCI: vendor 8086: Intel Corporation
|
---|
226 | PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI
|
---|
227 | PCI: info: Bridge
|
---|
228 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
---|
229 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
---|
230 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
---|
231 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
---|
232 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
233 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
234 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
235 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
236 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
237 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
238 | PCI: Capabilities: (not supported)
|
---|
239 | PCI: [dom 0, bus 0] bus 0, device 10, function 0: vendor 10ec, device 8139, revision 10
|
---|
240 | PCI: class_base 02, class_function 00, class_api 00
|
---|
241 | PCI: vendor 10ec: Realtek Semiconductor Co., Ltd.
|
---|
242 | PCI: device 8139: RTL-8139/8139C/8139C+ (RT8139)
|
---|
243 | PCI: info: Network controller (Ethernet controller)
|
---|
244 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
---|
245 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
---|
246 | PCI: cardbus_CIS 00000000, subsystem_id 8139, subsystem_vendor_id 10ec
|
---|
247 | PCI: interrupt_line 0b, interrupt_pin 01, min_grant 20, max_latency 40
|
---|
248 | PCI: base reg 0: host 0000d000, pci 0000d000, size 00000100, flags 01
|
---|
249 | PCI: base reg 1: host df800000, pci df800000, size 00000100, flags 00
|
---|
250 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
251 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
252 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
253 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
---|
254 | PCI: Capabilities: PM, VPD
|
---|
255 | acpi: ACPI disabled
|
---|
256 | usb module: init
|
---|
257 | usb stack 0: stack init
|
---|
258 | usb stack 0: looking for host controller modules
|
---|
259 | usb stack 0: looking for module busses/usb/uhci
|
---|
260 | usb stack 0: adding module busses/usb/uhci
|
---|
261 | usb_uhci: successfully started the controller
|
---|
262 | usb stack 0: module busses/usb/uhci successfully loaded
|
---|
263 | usb stack 0: looking for module busses/usb/ohci
|
---|
264 | usb stack 0: adding module busses/usb/ohci
|
---|
265 | usb_ohci: no devices found
|
---|
266 | usb stack 0: looking for module busses/usb/ehci
|
---|
267 | usb stack 0: adding module busses/usb/ehci
|
---|
268 | usb_ehci: no devices found
|
---|
269 | PANIC: page fault, but interrupts were disabled. Touching address 0x206273a9 from eip 0x8003cc78
|
---|
270 |
|
---|
271 | Welcome to Kernel Debugging Land...
|
---|
272 | Thread 19 "usb explore" running on CPU 0
|
---|
273 | kdebug> sc
|
---|
274 | stack trace for thread 19 "usb explore"
|
---|
275 | kernel stack: 0x8027b000 to 0x8027f000
|
---|
276 | frame caller <image>:function + offset
|
---|
277 | 0 8027eaf4 (+ 48) 8005bd55 <kernel_x86> invoke_debugger_command() + 0x00f5
|
---|
278 | 1 8027eb24 (+ 64) 8005bb45 <kernel_x86> invoke_pipe_segment__FP21debugger_command_pipelPc() + 0x0079
|
---|
279 | 2 8027eb64 (+ 64) 8005becc <kernel_x86> invoke_debugger_command_pipe() + 0x009c
|
---|
280 | 3 8027eba4 (+ 48) 8005d454 <kernel_x86> _ParseCommandPipe__16ExpressionParserRi() + 0x0234
|
---|
281 | 4 8027ebd4 (+ 64) 8005c88e <kernel_x86> EvaluateCommand__16ExpressionParserPCcRi() + 0x02ba
|
---|
282 | 5 8027ec14 (+ 224) 8005e87c <kernel_x86> evaluate_debug_command() + 0x0088
|
---|
283 | 6 8027ecf4 (+ 64) 80059c52 <kernel_x86> kernel_debugger_loop__Fv() + 0x01ae
|
---|
284 | 7 8027ed34 (+ 32) 8005aad5 <kernel_x86> kernel_debugger() + 0x004d
|
---|
285 | 8 8027ed54 (+ 192) 8005aa7d <kernel_x86> panic() + 0x0029
|
---|
286 | 9 8027ee14 (+ 48) 800ca872 <kernel_x86> page_fault_exception() + 0x008e
|
---|
287 | 10 8027ee44 (+ 12) 800cdfa6 <kernel_x86> int_bottom() + 0x0036
|
---|
288 | kernel iframe at 0x8027ee50 (end = 0x8027eea0)
|
---|
289 | eax 0xc8 ebx 0x80f80400 ecx 0x0 edx 0x80112668
|
---|
290 | esi 0x206273a1 edi 0x206273a1 ebp 0x8027eec8 esp 0x8027ee84
|
---|
291 | eip 0x8003cc78 eflags 0x210086
|
---|
292 | vector: 0xe, error code: 0x0
|
---|
293 | 11 8027ee50 (+ 120) 8003cc78 <kernel_x86> _mutex_lock() + 0x006c
|
---|
294 | 12 8027eec8 (+ 64) 8075e52f <usb> SendRequest__11ControlPipeUcUcUsUsUsPvUlPUl() + 0x003f
|
---|
295 | 13 8027ef08 (+ 80) 8075c487 <usb> UpdatePortStatus__3HubUc() + 0x0047
|
---|
296 | 14 8027ef58 (+ 64) 8075c693 <usb> Explore__3HubPP11change_item() + 0x0033
|
---|
297 | 15 8027ef98 (+ 64) 807599c2 <usb> ExploreThread__5StackPv() + 0x0056
|
---|
298 | 16 8027efd8 (+ 32) 800514bb <kernel_x86> _create_kernel_thread_kentry__Fv() + 0x001b
|
---|
299 | 17 8027eff8 (+2144866312) 80051458 <kernel_x86> thread_kthread_exit__Fv() + 0x0000
|
---|
300 | kdebug>
|
---|