| 1 | APM version 1.2 available, flags 3.
|
|---|
| 2 | smp_acpi_probe: entry base 0x9fc00, limit 0xa0000
|
|---|
| 3 | smp_acpi_probe: entry base 0xf0000, limit 0x100000
|
|---|
| 4 | smp_acpi_probe: found ACPI RSDP signature at 0x000f6c60
|
|---|
| 5 | smp: using ACPI to detect MP configuration
|
|---|
| 6 | smp: found rsdp at 0x000f6c60 oem id: PTLTD
|
|---|
| 7 | smp: rsdp points to rsdt at 0xfefab68
|
|---|
| 8 | smp: searching 3 entries for APIC information
|
|---|
| 9 | smp: skipping uninteresting header 'FACP'
|
|---|
| 10 | smp: local apic address is 0xfee00000
|
|---|
| 11 | smp: found local APIC with id 0
|
|---|
| 12 | smp: found io APIC with id 1 and address 0xfec00000
|
|---|
| 13 | VESA version = 2.0
|
|---|
| 14 | oem string: V M ware, Inc. VBE support 2.0
|
|---|
| 15 | 120: 320 x 200 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 16 | 121: 320 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 17 | 122: 640 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 18 | 123: 640 x 480 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 19 | 124: 800 x 600 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 20 | 125: 1024 x 768 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 21 | 126: 1152 x 864 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 22 | 127: 1280 x 960 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 23 | 128: 1280 x 1024 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 24 | 129: 1400 x 1050 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 25 | 12a: 1600 x 1200 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 26 | 12b: 1792 x 1344 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 27 | 12c: 1856 x 1392 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 28 | 12d: 1920 x 1440 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 29 | 12e: 320 x 200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 30 | 12f: 320 x 400 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 31 | 130: 640 x 400 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 32 | 131: 640 x 480 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 33 | 132: 800 x 600 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 34 | 133: 1024 x 768 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 35 | 134: 1152 x 864 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 36 | 135: 1280 x 960 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 37 | 136: 1280 x 1024 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 38 | 137: 1400 x 1050 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 39 | 138: 1600 x 1200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 40 | 139: 1792 x 1344 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 41 | 13a: 1856 x 1392 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 42 | 13b: 1920 x 1440 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 43 | 13c: 320 x 200 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 44 | 13d: 320 x 400 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 45 | 13e: 640 x 400 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 46 | 13f: 640 x 480 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 47 | 140: 800 x 600 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 48 | 141: 1024 x 768 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 49 | 142: 1152 x 864 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 50 | 143: 1280 x 960 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 51 | 144: 1280 x 1024 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 52 | 145: 1400 x 1050 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 53 | 146: 1600 x 1200 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 54 | 147: 1792 x 1344 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 55 | 148: 1856 x 1392 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 56 | 149: 1920 x 1440 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 57 | 100: 640 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 58 | 101: 640 x 480 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 59 | 103: 800 x 600 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 60 | 105: 1024 x 768 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 61 | 107: 1280 x 1024 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 62 | 10e: 320 x 200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 63 | 111: 640 x 480 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 64 | 114: 800 x 600 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 65 | 117: 1024 x 768 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 66 | 11a: 1280 x 1024 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 67 | VESA compatible graphics!
|
|---|
| 68 | EDID1: 0
|
|---|
| 69 | Welcome to the Haiku boot loader!
|
|---|
| 70 | number of drives: 1
|
|---|
| 71 | add_partitions_for(0x00105460, mountFS = no)
|
|---|
| 72 | add_partitions_for(fd = 0, mountFS = no)
|
|---|
| 73 | 0x001055b4 Partition::Partition
|
|---|
| 74 | 0x001055b4 Partition::Scan()
|
|---|
| 75 | check for partitioning_system: Amiga Partition Map
|
|---|
| 76 | check for partitioning_system: EFI GUID Partition Map
|
|---|
| 77 | check for partitioning_system: Intel Partition Map
|
|---|
| 78 | intel: pm_identify_partition(1, 1070516: 0, 104767488, 512)
|
|---|
| 79 | Partition::SetTo(): active: 6f
|
|---|
| 80 | Partition::CheckLocation() - end after session: 1983497949184 (session: 104767488)
|
|---|
| 81 | intel: _ParsePrimary(): partition 0: bad location, ignoring
|
|---|
| 82 | Partition::SetTo(): active: 74
|
|---|
| 83 | Partition::SetTo(): active: 0
|
|---|
| 84 | Partition::SetTo(): active: 0
|
|---|
| 85 | priority: 500
|
|---|
| 86 | check for partitioning_system: Intel Extended Partition
|
|---|
| 87 | check for partitioning_system: Apple Partition Map
|
|---|
| 88 | boot partition offset: 0
|
|---|
| 89 | 0x001055b4 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 90 | load kernel...
|
|---|
| 91 | unhandled pheader type 0x6
|
|---|
| 92 | unhandled pheader type 0x3
|
|---|
| 93 | video mode: 1024x768x32
|
|---|
| 94 | kernel entry at 80032804
|
|---|
| 95 | Welcome to kernel debugger output!
|
|---|
| 96 | Haiku revision: 25852
|
|---|
| 97 | CPU 0: type 0 family 6 extended_family 0 model 14 extended_model 0 stepping 8, string 'GenuineIntel'
|
|---|
| 98 | CPU 0: vendor 'Intel' model name 'Genuine Intel(R) CPU T2300 @ 1.66GHz'
|
|---|
| 99 | CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clfsh ds acpi mmx fxsr sse sse2 ss sse3
|
|---|
| 100 | heap_attach: attached to 0x90b4b000 - usable range 0x90b60000 - 0x91b4b000
|
|---|
| 101 | slab: init base 0x91b4b000 + 0x2000
|
|---|
| 102 | vm_mark_page_range_inuse: page 0x9f in non-free state 7!
|
|---|
| 103 | initialize_commpage_syscall(): sysenter/sysexit supported
|
|---|
| 104 | allocate_commpage_entry(3, 5) -> 0xffff0100
|
|---|
| 105 | allocate_commpage_entry(2, 12) -> 0xffff0108
|
|---|
| 106 | apm_init()
|
|---|
| 107 | code32: 0xf000, 0x5643, length 0xffff
|
|---|
| 108 | code16: 0xf000, length 0xffff
|
|---|
| 109 | data: 0x40, length 0xffff
|
|---|
| 110 | heap_attach: attached to 0x90800000 - usable range 0x90803000 - 0x90a00000
|
|---|
| 111 | Could not register image "usb_disk": Bad argument type passed to function
|
|---|
| 112 | PCI: pci_module_init
|
|---|
| 113 | PCI: mechanism 1 controller found
|
|---|
| 114 | PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0080 to 0x008c
|
|---|
| 115 | PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7190, revision 01
|
|---|
| 116 | PCI: class_base 06, class_function 00, class_api 00
|
|---|
| 117 | PCI: vendor 8086: Intel Corporation
|
|---|
| 118 | PCI: device 7190: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (Virtual Machine Chipset)
|
|---|
| 119 | PCI: info: Bridge (Host bridge)
|
|---|
| 120 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 121 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 122 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 123 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 124 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 125 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 126 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 127 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 128 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 129 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 130 | PCI: Capabilities: (empty list)
|
|---|
| 131 | PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7191, revision 01
|
|---|
| 132 | PCI: class_base 06, class_function 04, class_api 00
|
|---|
| 133 | PCI: vendor 8086: Intel Corporation
|
|---|
| 134 | PCI: device 7191: 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
|
|---|
| 135 | PCI: info: Bridge (PCI bridge, Normal decode)
|
|---|
| 136 | PCI: line_size 00, latency 00, header_type 01, BIST 00
|
|---|
| 137 | PCI: subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 138 | PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 40
|
|---|
| 139 | PCI: io_base_upper_16 0000, io_base f0
|
|---|
| 140 | PCI: io_limit_upper_16 0000, io_limit 00
|
|---|
| 141 | PCI: memory_base fff0, memory_limit 0000
|
|---|
| 142 | PCI: prefetchable_memory_base_upper32 00000000, prefetchable_memory_base fff0
|
|---|
| 143 | PCI: prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit 0000
|
|---|
| 144 | PCI: bridge_control 0080, secondary_status 02a0
|
|---|
| 145 | PCI: interrupt_line 00, interrupt_pin 00
|
|---|
| 146 | PCI: ROM base host 00000000, pci 00000000, size ??
|
|---|
| 147 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 148 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 149 | PCI: Capabilities: (not supported)
|
|---|
| 150 | PCI: [dom 0, bus 0] bus 0, device 7, function 0: vendor 8086, device 7110, revision 08
|
|---|
| 151 | PCI: class_base 06, class_function 01, class_api 00
|
|---|
| 152 | PCI: vendor 8086: Intel Corporation
|
|---|
| 153 | PCI: device 7110: 82371AB/EB/MB PIIX4 ISA (Virtual Machine Chipset)
|
|---|
| 154 | PCI: info: Bridge (ISA bridge)
|
|---|
| 155 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 156 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 157 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 158 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 159 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 160 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 161 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 162 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 163 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 164 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 165 | PCI: Capabilities: (not supported)
|
|---|
| 166 | PCI: [dom 0, bus 0] bus 0, device 7, function 1: vendor 8086, device 7111, revision 01
|
|---|
| 167 | PCI: class_base 01, class_function 01, class_api 8a
|
|---|
| 168 | PCI: vendor 8086: Intel Corporation
|
|---|
| 169 | PCI: device 7111: 82371AB/EB/MB PIIX4 IDE (Virtual Machine Chipset)
|
|---|
| 170 | PCI: info: Mass storage controller (IDE interface)
|
|---|
| 171 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
|---|
| 172 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 173 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 174 | PCI: interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 175 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 176 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 177 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 178 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 179 | PCI: base reg 4: host 00001050, pci 00001050, size 00000010, flags 01
|
|---|
| 180 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 181 | PCI: Capabilities: (not supported)
|
|---|
| 182 | PCI: [dom 0, bus 0] bus 0, device 7, function 3: vendor 8086, device 7113, revision 08
|
|---|
| 183 | PCI: class_base 06, class_function 80, class_api 00
|
|---|
| 184 | PCI: vendor 8086: Intel Corporation
|
|---|
| 185 | PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI (Virtual Machine Chipset)
|
|---|
| 186 | PCI: info: Bridge
|
|---|
| 187 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 188 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 189 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 190 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 191 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 192 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 193 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 194 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 195 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 196 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 197 | PCI: Capabilities: (not supported)
|
|---|
| 198 | PCI: [dom 0, bus 0] bus 0, device 15, function 0: vendor 15ad, device 0405, revision 00
|
|---|
| 199 | PCI: class_base 03, class_function 00, class_api 00
|
|---|
| 200 | PCI: vendor 15ad: VMware Inc
|
|---|
| 201 | PCI: device 0405: Abstract SVGA II Adapter
|
|---|
| 202 | PCI: info: Display controller (VGA compatible controller, VGA controller)
|
|---|
| 203 | PCI: line_size 08, latency 40, header_type 00, BIST 00
|
|---|
| 204 | PCI: ROM base host 00000000, pci 00000000, size 00008000
|
|---|
| 205 | PCI: cardbus_CIS 00000000, subsystem_id 0405, subsystem_vendor_id 15ad
|
|---|
| 206 | PCI: interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 207 | PCI: base reg 0: host 00001060, pci 00001060, size 00000010, flags 01
|
|---|
| 208 | PCI: base reg 1: host f0000000, pci f0000000, size 08000000, flags 00
|
|---|
| 209 | PCI: base reg 2: host e8000000, pci e8000000, size 00800000, flags 00
|
|---|
| 210 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 211 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 212 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 213 | PCI: Capabilities: (empty list)
|
|---|
| 214 | PCI: [dom 0, bus 0] bus 0, device 16, function 0: vendor 8086, device 100f, revision 01
|
|---|
| 215 | PCI: class_base 02, class_function 00, class_api 00
|
|---|
| 216 | PCI: vendor 8086: Intel Corporation
|
|---|
| 217 | PCI: device 100f: 82545EM Gigabit Ethernet Controller (Copper) (Abstract PRO/1000 MT Single Port Adapter)
|
|---|
| 218 | PCI: info: Network controller (Ethernet controller)
|
|---|
| 219 | PCI: line_size 10, latency 00, header_type 00, BIST 00
|
|---|
| 220 | PCI: ROM base host 00000000, pci 00000000, size 00010000
|
|---|
| 221 | PCI: cardbus_CIS 00000000, subsystem_id 0750, subsystem_vendor_id 15ad
|
|---|
| 222 | PCI: interrupt_line 09, interrupt_pin 01, min_grant ff, max_latency 00
|
|---|
| 223 | PCI: base reg 0: host e8820000, pci e8820000, size 00020000, flags 04
|
|---|
| 224 | PCI: base reg 1: host 00000000, pci 00000000, size 00000010, flags 0f
|
|---|
| 225 | PCI: base reg 2: host e8800000, pci e8800000, size 00010000, flags 04
|
|---|
| 226 | PCI: base reg 3: host 00000000, pci 00000000, size 00000010, flags 0f
|
|---|
| 227 | PCI: base reg 4: host 00001070, pci 00001070, size 00000010, flags 09
|
|---|
| 228 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 229 | PCI: Capabilities: PM, PCI-X
|
|---|
| 230 | usb_uhci: no devices found
|
|---|
| 231 | usb_ohci: no devices found
|
|---|
| 232 | usb_ehci: no devices found
|
|---|
| 233 | USB Stack: no bus managers available
|
|---|
| 234 | usb_disk: getting module failed 0x80007007
|
|---|
| 235 | devfs_add_preloaded_drivers: Failed to add "usb_disk"
|
|---|
| 236 | get_boot_partitions(): boot volume message:
|
|---|
| 237 | field: "booted from image", type: BOOL (0x424f4f4c):
|
|---|
| 238 | [ 0] false
|
|---|
| 239 | field: "partition offset", type: LLNG (0x4c4c4e47):
|
|---|
| 240 | [ 0] 0 (0x0)
|
|---|
| 241 | field: "boot method", type: LONG (0x4c4f4e47):
|
|---|
| 242 | [ 0] 0 (0x0)
|
|---|
| 243 | field: "boot drive number", type: LLNG (0x4c4c4e47):
|
|---|
| 244 | [ 0] 128 (0x80)
|
|---|
| 245 | field: "disk identifier", type: RAWT (0x52415754):
|
|---|
| 246 | [ 0] data: "0x80701da0", 80 bytes
|
|---|
| 247 | get_boot_partitions(): boot method type: 0
|
|---|
| 248 | partitioning system: partitioning_systems/intel/extended/v1
|
|---|
| 249 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1)
|
|---|
| 250 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 251 | intel: ep_std_ops(0x1)
|
|---|
| 252 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 253 | intel: ep_std_ops(0x2)
|
|---|
| 254 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 255 | partitioning system: partitioning_systems/intel/map/v1
|
|---|
| 256 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1)
|
|---|
| 257 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1
|
|---|
| 258 | intel: pm_std_ops(0x1)
|
|---|
| 259 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0
|
|---|
| 260 | intel: pm_std_ops(0x2)
|
|---|
| 261 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 262 | file system: file_systems/bfs/v1
|
|---|
| 263 | KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1)
|
|---|
| 264 | KDiskSystem::Load(): file_systems/bfs/v1 -> 1
|
|---|
| 265 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 0
|
|---|
| 266 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 267 | file system: file_systems/devfs/v1
|
|---|
| 268 | KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1)
|
|---|
| 269 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 270 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 271 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 272 | file system: file_systems/rootfs/v1
|
|---|
| 273 | KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1)
|
|---|
| 274 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 275 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 276 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 277 | number of disk systems: 5
|
|---|
| 278 | KDiskDeviceManager::_Scan(/dev/disk)
|
|---|
| 279 | PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
|
|---|
| 280 | PCI-IDE: init channel...
|
|---|
| 281 | PCI-IDE: channel index 0
|
|---|
| 282 | PCI-IDE: bus master base 0x1050
|
|---|
| 283 | PCI-IDE: init channel done
|
|---|
| 284 | IDE: scan_device_worker: bus 0x90c1f000, device-number 0
|
|---|
| 285 | IDE: create_device: bus 0x90c1f000, device-number 0
|
|---|
| 286 | IDE: setup_device_links: bus 0x90c1f000, device 0x90bda400
|
|---|
| 287 | IDE: scan_device_int: device 0x90bda400, atapi 0
|
|---|
| 288 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 289 | IDE: scan_device_int: got a fast response
|
|---|
| 290 | IDE: scan_device_int: device found
|
|---|
| 291 | IDE: scan_device_worker: bus 0x90c1f000, device-number 1
|
|---|
| 292 | IDE: create_device: bus 0x90c1f000, device-number 1
|
|---|
| 293 | IDE: setup_device_links: bus 0x90c1f000, device 0x90bdac00
|
|---|
| 294 | IDE: scan_device_int: device 0x90bdac00, atapi 0
|
|---|
| 295 | IDE: scan_device_int: send_command failed
|
|---|
| 296 | IDE: scan_device_int: device 0x90bdac00, atapi 1
|
|---|
| 297 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 298 | IDE: scan_device_int: no fast response to inquiry
|
|---|
| 299 | IDE: scan_device_int: status 0x00
|
|---|
| 300 | IDE: scan_device_int: busy bit not set after 100ms - probably noone there
|
|---|
| 301 | IDE: scan_device_int: aborting because busy bit not set
|
|---|
| 302 | IDE: destroy_device: device 0x90bdac00
|
|---|
| 303 | IDE: cleanup_device_links: device 0x90bdac00
|
|---|
| 304 | IDE: scan_device_worker: bus 0x90c1f000, device-number 0
|
|---|
| 305 | IDE: destroy_device: device 0x90bda400
|
|---|
| 306 | IDE: cleanup_device_links: device 0x90bda400
|
|---|
| 307 | IDE: create_device: bus 0x90c1f000, device-number 0
|
|---|
| 308 | IDE: setup_device_links: bus 0x90c1f000, device 0x90bda400
|
|---|
| 309 | IDE: scan_device_int: device 0x90bda400, atapi 0
|
|---|
| 310 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 311 | IDE: scan_device_int: got a fast response
|
|---|
| 312 | IDE: scan_device_int: device found
|
|---|
| 313 | IDE: scan_device_worker: bus 0x90c1f000, device-number 1
|
|---|
| 314 | IDE: create_device: bus 0x90c1f000, device-number 1
|
|---|
| 315 | IDE: setup_device_links: bus 0x90c1f000, device 0x90bdac00
|
|---|
| 316 | IDE: scan_device_int: device 0x90bdac00, atapi 0
|
|---|
| 317 | IDE: scan_device_int: send_command failed
|
|---|
| 318 | IDE: scan_device_int: device 0x90bdac00, atapi 1
|
|---|
| 319 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 320 | IDE: scan_device_int: no fast response to inquiry
|
|---|
| 321 | IDE: scan_device_int: status 0x00
|
|---|
| 322 | IDE: scan_device_int: busy bit not set after 100ms - probably noone there
|
|---|
| 323 | IDE: scan_device_int: aborting because busy bit not set
|
|---|
| 324 | IDE: destroy_device: device 0x90bdac00
|
|---|
| 325 | IDE: cleanup_device_links: device 0x90bdac00
|
|---|
| 326 | publish device: node 0x90c20600, path disk/ata/0/master/raw, module generic/block_io/device_v1
|
|---|
| 327 | PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
|
|---|
| 328 | PCI-IDE: init channel...
|
|---|
| 329 | PCI-IDE: channel index 1
|
|---|
| 330 | PCI-IDE: bus master base 0x1058
|
|---|
| 331 | PCI-IDE: init channel done
|
|---|
| 332 | IDE: scan_device_worker: bus 0x90c1f200, device-number 0
|
|---|
| 333 | IDE: create_device: bus 0x90c1f200, device-number 0
|
|---|
| 334 | IDE: setup_device_links: bus 0x90c1f200, device 0x90bdac00
|
|---|
| 335 | IDE: scan_device_int: device 0x90bdac00, atapi 0
|
|---|
| 336 | IDE: scan_device_int: send_command failed
|
|---|
| 337 | IDE: destroy_device: device 0x90bdac00
|
|---|
| 338 | IDE: cleanup_device_links: device 0x90bdac00
|
|---|
| 339 | IDE: scan_device_worker: bus 0x90c1f200, device-number 1
|
|---|
| 340 | IDE: create_device: bus 0x90c1f200, device-number 1
|
|---|
| 341 | IDE: setup_device_links: bus 0x90c1f200, device 0x90bdac00
|
|---|
| 342 | IDE: scan_device_int: device 0x90bdac00, atapi 0
|
|---|
| 343 | IDE: scan_device_int: send_command failed
|
|---|
| 344 | IDE: destroy_device: device 0x90bdac00
|
|---|
| 345 | IDE: cleanup_device_links: device 0x90bdac00
|
|---|
| 346 | IDE: scan_device_worker: bus 0x90c1f200, device-number 0
|
|---|
| 347 | IDE: create_device: bus 0x90c1f200, device-number 0
|
|---|
| 348 | IDE: setup_device_links: bus 0x90c1f200, device 0x90bdac00
|
|---|
| 349 | IDE: scan_device_int: device 0x90bdac00, atapi 0
|
|---|
| 350 | IDE: scan_device_int: send_command failed
|
|---|
| 351 | IDE: destroy_device: device 0x90bdac00
|
|---|
| 352 | IDE: cleanup_device_links: device 0x90bdac00
|
|---|
| 353 | IDE: scan_device_worker: bus 0x90c1f200, device-number 1
|
|---|
| 354 | IDE: create_device: bus 0x90c1f200, device-number 1
|
|---|
| 355 | IDE: setup_device_links: bus 0x90c1f200, device 0x90bdac00
|
|---|
| 356 | IDE: scan_device_int: device 0x90bdac00, atapi 0
|
|---|
| 357 | IDE: scan_device_int: send_command failed
|
|---|
| 358 | IDE: destroy_device: device 0x90bdac00
|
|---|
| 359 | IDE: cleanup_device_links: device 0x90bdac00
|
|---|
| 360 | [35mahci:[0m ahci_supports_device
|
|---|
| 361 | KDiskDeviceManager::_Scan(/dev/disk/ata)
|
|---|
| 362 | KDiskDeviceManager::_Scan(/dev/disk/ata/0)
|
|---|
| 363 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master)
|
|---|
| 364 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw)
|
|---|
| 365 | found device: /dev/disk/ata/0/master/raw
|
|---|
| 366 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/0/master/raw)
|
|---|
| 367 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 368 | intel: ep_std_ops(0x1)
|
|---|
| 369 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 370 | returned: -1
|
|---|
| 371 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 372 | intel: ep_std_ops(0x2)
|
|---|
| 373 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1
|
|---|
| 374 | intel: pm_std_ops(0x1)
|
|---|
| 375 | trying: partitioning_systems/intel/map/v1
|
|---|
| 376 | intel: pm_identify_partition(0, 0: 0, 104767488, 512)
|
|---|
| 377 | Partition::SetTo(): active: 6f
|
|---|
| 378 | Partition::CheckLocation() - end after session: 1983497949184 (session: 104767488)
|
|---|
| 379 | intel: _ParsePrimary(): partition 0: bad location, ignoring
|
|---|
| 380 | Partition::SetTo(): active: 74
|
|---|
| 381 | Partition::SetTo(): active: 0
|
|---|
| 382 | Partition::SetTo(): active: 0
|
|---|
| 383 | returned: 0.5
|
|---|
| 384 | KDiskSystem::Load(): file_systems/bfs/v1 -> 1
|
|---|
| 385 | trying: file_systems/bfs/v1
|
|---|
| 386 | returned: 0.8
|
|---|
| 387 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0
|
|---|
| 388 | intel: pm_std_ops(0x2)
|
|---|
| 389 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 390 | trying: file_systems/devfs/v1
|
|---|
| 391 | returned: -1
|
|---|
| 392 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 393 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 394 | trying: file_systems/rootfs/v1
|
|---|
| 395 | returned: -1
|
|---|
| 396 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 397 | scanning with: file_systems/bfs/v1
|
|---|
| 398 | KDiskSystem::Load(): file_systems/bfs/v1 -> 2
|
|---|
| 399 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 1
|
|---|
| 400 | device 0: /dev/disk/ata/0/master/raw
|
|---|
| 401 | media status: No error
|
|---|
| 402 | device flags: 2
|
|---|
| 403 | offset: 0
|
|---|
| 404 | size: 104767488 (99.914 MB)
|
|---|
| 405 | content size: 104765440
|
|---|
| 406 | block size: 2048
|
|---|
| 407 | child count: 0
|
|---|
| 408 | index: -1
|
|---|
| 409 | status: 0
|
|---|
| 410 | flags: 3
|
|---|
| 411 | volume: -1
|
|---|
| 412 | disk system: file_systems/bfs/v1
|
|---|
| 413 | name: <NULL>
|
|---|
| 414 | content name: Haiku
|
|---|
| 415 | type: <NULL>
|
|---|
| 416 | content type: Be File System
|
|---|
| 417 | params: <NULL>
|
|---|
| 418 | content params: <NULL>
|
|---|
| 419 | bfs: mounted "Haiku" (root node at 2053, device = /dev/disk/ata/0/master/raw)
|
|---|
| 420 | module: Search for file_cache/launch_speedup/v1 failed.
|
|---|
| 421 | partitioning system: partitioning_systems/session/v1
|
|---|
| 422 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1)
|
|---|
| 423 | KDiskSystem::Load(): partitioning_systems/session/v1 -> 1
|
|---|
| 424 | KDiskSystem::Unload(): partitioning_systems/session/v1 -> 0
|
|---|
| 425 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 426 | file system: file_systems/fat/v1
|
|---|
| 427 | KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1)
|
|---|
| 428 | KDiskSystem::Load(): file_systems/fat/v1 -> 1
|
|---|
| 429 | KDiskSystem::Unload(): file_systems/fat/v1 -> 0
|
|---|
| 430 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 431 | file system: file_systems/iso9660/v1
|
|---|
| 432 | KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1)
|
|---|
| 433 | KDiskSystem::Load(): file_systems/iso9660/v1 -> 1
|
|---|
| 434 | KDiskSystem::Unload(): file_systems/iso9660/v1 -> 0
|
|---|
| 435 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 436 | KDiskDeviceManager::_Scan(/dev/disk)
|
|---|
| 437 | con_init: trying module console/frame_buffer/v1
|
|---|
| 438 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/console
|
|---|
| 439 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/dprintf
|
|---|
| 440 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/keyboard
|
|---|
| 441 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/null
|
|---|
| 442 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/random
|
|---|
| 443 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/tty
|
|---|
| 444 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/zero
|
|---|
| 445 | [35mahci:[0m ahci_supports_device
|
|---|
| 446 | KDiskDeviceManager::_Scan(/dev/disk/ata)
|
|---|
| 447 | KDiskDeviceManager::_Scan(/dev/disk/ata/0)
|
|---|
| 448 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master)
|
|---|
| 449 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw)
|
|---|
| 450 | KDiskDeviceManager::_Scan(/dev/disk/scsi)
|
|---|
| 451 | devfs: "scsi_cd" api_version missing
|
|---|
| 452 | devfs: "scsi_cd" mandatory driver symbol(s) missing!
|
|---|
| 453 | devfs: "scsi_disk" api_version missing
|
|---|
| 454 | devfs: "scsi_disk" mandatory driver symbol(s) missing!
|
|---|
| 455 | KDiskDeviceManager::_Scan(/dev/disk/usb)
|
|---|
| 456 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/usb/usb_disk
|
|---|
| 457 | KDiskDeviceManager::_Scan(/dev/disk/virtual)
|
|---|
| 458 | nbd:>init_hardware()
|
|---|
| 459 | nbd:>init_driver()
|
|---|
| 460 | allocate_commpage_entry(4, 34) -> 0xffff0118
|
|---|
| 461 | set_memory_write_back base 0 length 10000000
|
|---|
| 462 | find_nearest 10000000 0
|
|---|
| 463 | solutions: 0x10000000
|
|---|
| 464 | allocate MTRR slot 0, base = 0, length = 10000000, type=0x6
|
|---|
| 465 | kernel debugger extension "debugger/hangman/v1": loaded
|
|---|
| 466 | kernel debugger extension "debugger/invalidate_on_exit/v1": loaded
|
|---|
| 467 | allocate MTRR slot 1, base = f0000000, length = 400000, type=0x1
|
|---|
| 468 | publish device: node 0x90cc4240, path disk/ata/0/master/raw, module generic/block_io/device_v1
|
|---|
| 469 | REG: Failed to open shadow passwd DB file "/etc/shadow": No such file or directory
|
|---|
| 470 | bfs: bfs_open_dir:1461: Invalid Argument
|
|---|
| 471 | register_domain(1, internet)
|
|---|
| 472 | unregister_domain(0x910739c0, 1, internet)
|
|---|
| 473 | register_domain(9, unix)
|
|---|
| 474 | unregister_domain(0x91092360, 9, unix)
|
|---|
| 475 | register_domain(1, internet)
|
|---|
| 476 | get_device_interface: ask "network/devices/ethernet/v1" for loop
|
|---|
| 477 | get_device_interface: ask "network/devices/loopback/v1" for loop
|
|---|
| 478 | 3com: init_hardware(0x802b81a8)
|
|---|
| 479 | 3com: no hardware found.
|
|---|
| 480 | etherpci: init_driver init_driver: etherpci not found
|
|---|
| 481 | ipro100: init_hardware(0x802b6b50)
|
|---|
| 482 | ipro100: no hardware found.
|
|---|
| 483 | ipro1000: init_hardware(0x802d2888)
|
|---|
| 484 | ipro1000, found Intel(R) PRO/1000 Network Connection Version - 6.5.3 at 6
|
|---|
| 485 | ipro1000: init_driver(0x802d2888)
|
|---|
| 486 | [ipro1000] (em) Memory Access and/or Bus Master bits were not set!
|
|---|
| 487 | [ipro1000] (em) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1, 0x2)
|
|---|
| 488 | [ipro1000] (em) bus_alloc_resource(4, [32], 0x0, 0xffffffff, 0x1, 0x2)
|
|---|
| 489 | [ipro1000] (em) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1, 0x6)
|
|---|
| 490 | if_initname(0x910a2800, em, 3)
|
|---|
| 491 | [ipro1000] ipro1000: /dev/net/ipro1000/0
|
|---|
| 492 | Adding entry for Ethernet 10baseT/UTP
|
|---|
| 493 | Adding entry for Ethernet 10baseT/UTP <full-duplex>
|
|---|
| 494 | Adding entry for Ethernet 100baseTX
|
|---|
| 495 | Adding entry for Ethernet 100baseTX <full-duplex>
|
|---|
| 496 | Adding entry for Ethernet 1000baseTX <full-duplex>
|
|---|
| 497 | Adding entry for Ethernet 1000baseTX
|
|---|
| 498 | Adding entry for Ethernet autoselect
|
|---|
| 499 | ifmedia_set: target Ethernet autoselect
|
|---|
| 500 | ifmedia_set: setting to Ethernet autoselect
|
|---|
| 501 | [ipro1000] (em) Link is up 1000 Mbps Full Duplex
|
|---|
| 502 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/ipro1000
|
|---|
| 503 | marvell_yukon: init_hardware(0x80517090)
|
|---|
| 504 | marvell_yukon: no hardware found.
|
|---|
| 505 | nforce: init_hardware(0x805147a0)
|
|---|
| 506 | nforce: no hardware found.
|
|---|
| 507 | rtl8139: init_hardware(0x80510b38)
|
|---|
| 508 | rtl8139: no hardware found.
|
|---|
| 509 | syskonnect: init_hardware(0x80516a88)
|
|---|
| 510 | syskonnect: no hardware found.
|
|---|
| 511 | usb_uhci: no devices found
|
|---|
| 512 | usb_ohci: no devices found
|
|---|
| 513 | usb_ehci: no devices found
|
|---|
| 514 | USB Stack: no bus managers available
|
|---|
| 515 | via_rhine: init_hardware(0x80510f80)
|
|---|
| 516 | via_rhine: no hardware found.
|
|---|
| 517 | bfs: bfs_open_dir:1461: Invalid Argument
|
|---|
| 518 | get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/ipro1000/0
|
|---|
| 519 | ipv4_datalink_init(/dev/net/ipro1000/0)
|
|---|
| 520 | [net/ipro1000/0] compat_open(0x2)
|
|---|
| 521 | ifmedia_ioctl: switching em to Ethernet autoselect
|
|---|
| 522 | /dev/net/ipro1000/0: media change, media 0x900030 quality 1000 speed 1000000
|
|---|
| 523 | register_domain(4, link)
|
|---|
| 524 | intel_extreme: init_hardware()
|
|---|
| 525 | Radeon - init_hardware: Version: 5.1.6.0
|
|---|
| 526 | Radeon - Radeon_CardDetect: no supported devices found
|
|---|
| 527 | S3: init_hardware() - no supported devices
|
|---|
| 528 | vesa: init_hardware()
|
|---|
| 529 | vesa: init_driver()
|
|---|
| 530 | vesa: publish_devices()
|
|---|
| 531 | vesa: find_device()
|
|---|
| 532 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/graphics/vesa
|
|---|
| 533 | vesa: vesa_init() completed successfully!
|
|---|
| 534 | vesa: acc: vesa.accelerant
|
|---|
| 535 | ps2_hid: init_hardware
|
|---|
| 536 | ps2_hid: init_driver
|
|---|
| 537 | ps2_hid: publish_devices
|
|---|
| 538 | ps2_hid: uninit_driver
|
|---|
| 539 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/ps2_hid
|
|---|
| 540 | usb_uhci: no devices found
|
|---|
| 541 | usb_ohci: no devices found
|
|---|
| 542 | usb_ehci: no devices found
|
|---|
| 543 | USB Stack: no bus managers available
|
|---|
| 544 | usb_uhci: no devices found
|
|---|
| 545 | usb_ohci: no devices found
|
|---|
| 546 | usb_ehci: no devices found
|
|---|
| 547 | USB Stack: no bus managers available
|
|---|
| 548 | wacom: cannot get module "bus_managers/usb/v3"
|
|---|
| 549 | bfs: bfs_open_dir:1461: Invalid Argument
|
|---|
| 550 | ps2: devfs_publish_device input/mouse/ps2/0, status = 0x00000000
|
|---|
| 551 | ps2: probe_mouse Extended PS/2 mouse found
|
|---|
| 552 | emuxki: init_hardware()
|
|---|
| 553 | ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000
|
|---|
| 554 | ps2: keyboard found
|
|---|
| 555 | Running post install script /boot/common/boot/post_install/mime_update.sh ...
|
|---|
| 556 | cx23882: init_hardware()
|
|---|
| 557 | auich: init_hardware()
|
|---|
| 558 | auvia: init_hardware()
|
|---|
| 559 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/audio/hmulti/emuxki
|
|---|
| 560 | [35mahci:[0m ahci_supports_device
|
|---|
| 561 | [35mahci:[0m ahci_supports_device
|
|---|
| 562 | usb_uhci: no devices found
|
|---|
| 563 | usb_ohci: no devices found
|
|---|
| 564 | usb_ehci: no devices found
|
|---|
| 565 | USB Stack: no bus managers available
|
|---|
| 566 | vm_soft_fault: va 0x14 not covered by area in address space
|
|---|
| 567 | vm_page_fault: vm_soft_fault returned error 'Bad address' on fault at 0x14, ip 0x3ee6e4, write 1, user 1, thread 0x98
|
|---|
| 568 | vm_page_fault: sending team "Tracker" 0x52 SIGSEGV, ip 0x3ee6e4 ("libbe.so_seg0ro" +0x1ec6e4)
|
|---|
| 569 | stack trace:
|
|---|
| 570 | 0x0033b951 (libbe.so_seg0ro + 0x139951)
|
|---|
| 571 | 0x00342074 (libbe.so_seg0ro + 0x140074)
|
|---|
| 572 | 0x00341f83 (libbe.so_seg0ro + 0x13ff83)
|
|---|
| 573 | 0x003420be (libbe.so_seg0ro + 0x1400be)
|
|---|
| 574 | 0x00342191 (libbe.so_seg0ro + 0x140191)
|
|---|
| 575 | 0x00347d4f (libbe.so_seg0ro + 0x145d4f)
|
|---|
| 576 | 0x004f4f21 (libtracker.so_seg0ro + 0x77f21)
|
|---|
| 577 | 0x005067ce (libtracker.so_seg0ro + 0x897ce)
|
|---|
| 578 | 0x002b0dd0 (libbe.so_seg0ro + 0xaedd0)
|
|---|
| 579 | 0x0062f5ac (libroot.so_seg0ro + 0x245ac)
|
|---|
| 580 | 0x70184fec (w>TrackerWindow_152_stack + 0x3ffec)
|
|---|
| 581 | vm_soft_fault: va 0x0 not covered by area in address space
|
|---|
| 582 | vm_page_fault: vm_soft_fault returned error 'Bad address' on fault at 0x0, ip 0x80094060, write 0, user 0, thread 0x98
|
|---|
| 583 | debug_server: Thread 152 entered the debugger: Segment violation
|
|---|
| 584 | stack trace, current PC 0x3ee6e4 _ZTS11BArchivable + 0:
|
|---|
| 585 | (0x70184e0c) 0x33b951 _ZN5BView9_SetOwnerEP7BWindow + 0x89
|
|---|
| 586 | (0x70184e3c) 0x342074 _ZN5BView7_DetachEv + 0x126
|
|---|
| 587 | (0x70184e6c) 0x341f83 _ZN5BView7_DetachEv + 0x35
|
|---|
| 588 | (0x70184e9c) 0x3420be _ZN5BView11_RemoveSelfEv + 0x3e
|
|---|
| 589 | (0x70184edc) 0x342191 _ZN5BView10RemoveSelfEv + 0x47
|
|---|
| 590 | (0x70184efc) 0x347d4f _ZN7BWindowD2Ev + 0xb3
|
|---|
| 591 | (0x70184f3c) 0x4f4f21 _ZN8BPrivate16BContainerWindowD2Ev + 0x13f
|
|---|
| 592 | (0x70184f6c) 0x5067ce _ZN8BPrivate11BDeskWindowD0Ev + 0xe2
|
|---|
| 593 | (0x70184f9c) 0x2b0dd0 _ZN7BLooper7_task0_EPv + 0x40
|
|---|
| 594 | (0x70184fbc) 0x62f5ac _thread_do_exit_notification + 0x78 (closest symbol)
|
|---|
