| 1 | APM version 1.2 available, flags 3.
|
|---|
| 2 | smp: using ACPI to detect MP configuration
|
|---|
| 3 | smp: local apic address is 0xfee00000
|
|---|
| 4 | smp: found local APIC with id 0
|
|---|
| 5 | smp: found io APIC with id 1 and address 0xfec00000
|
|---|
| 6 | VESA version = 2.0
|
|---|
| 7 | oem string: V M ware, Inc. VBE support 2.0
|
|---|
| 8 | 120: 320 x 200 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 9 | 121: 320 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 10 | 122: 640 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 11 | 123: 640 x 480 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 12 | 124: 800 x 600 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 13 | 125: 1024 x 768 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 14 | 126: 1152 x 864 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 15 | 127: 1280 x 960 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 16 | 128: 1280 x 1024 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 17 | 129: 1400 x 1050 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 18 | 12a: 320 x 200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 19 | 12b: 320 x 400 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 20 | 12c: 640 x 400 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 21 | 12d: 640 x 480 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 22 | 12e: 800 x 600 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 23 | 12f: 1024 x 768 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 24 | 130: 1152 x 864 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 25 | 131: 1280 x 960 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 26 | 132: 1280 x 1024 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 27 | 133: 1400 x 1050 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 28 | 134: 320 x 200 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 29 | 135: 320 x 400 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 30 | 136: 640 x 400 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 31 | 137: 640 x 480 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 32 | 138: 800 x 600 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 33 | 139: 1024 x 768 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 34 | 13a: 1152 x 864 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 35 | 13b: 1280 x 960 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 36 | 13c: 1280 x 1024 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 37 | 13d: 1400 x 1050 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 38 | 100: 640 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 39 | 101: 640 x 480 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 40 | 103: 800 x 600 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 41 | 105: 1024 x 768 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 42 | 107: 1280 x 1024 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1)
|
|---|
| 43 | 10e: 320 x 200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 44 | 111: 640 x 480 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 45 | 114: 800 x 600 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 46 | 117: 1024 x 768 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 47 | 11a: 1280 x 1024 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1)
|
|---|
| 48 | VESA compatible graphics!
|
|---|
| 49 | EDID1: 0
|
|---|
| 50 | Welcome to the Haiku boot loader!
|
|---|
| 51 | number of drives: 1
|
|---|
| 52 | add_partitions_for(0x00105340, mountFS = no)
|
|---|
| 53 | add_partitions_for(fd = 0, mountFS = no)
|
|---|
| 54 | 0x00105494 Partition::Partition
|
|---|
| 55 | 0x00105494 Partition::Scan()
|
|---|
| 56 | check for partitioning_system: Amiga Partition Map
|
|---|
| 57 | check for partitioning_system: EFI GUID Partition Map
|
|---|
| 58 | check for partitioning_system: Intel Partition Map
|
|---|
| 59 | intel: pm_identify_partition(1, 1070228: 0, 268369920, 512)
|
|---|
| 60 | Partition::SetTo(): active: 6f
|
|---|
| 61 | Partition::CheckLocation() - end after session: 1983497949184 (session: 268369920)
|
|---|
| 62 | intel: _ParsePrimary(): partition 0: bad location, ignoring
|
|---|
| 63 | Partition::SetTo(): active: 74
|
|---|
| 64 | Partition::SetTo(): active: 0
|
|---|
| 65 | Partition::SetTo(): active: 0
|
|---|
| 66 | priority: 500
|
|---|
| 67 | check for partitioning_system: Intel Extended Partition
|
|---|
| 68 | check for partitioning_system: Apple Partition Map
|
|---|
| 69 | boot partition offset: 0
|
|---|
| 70 | 0x00105494 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 71 | FileMapDisk::FindAnyFileMapDisk(0x0010611c)
|
|---|
| 72 | load kernel...
|
|---|
| 73 | video mode: 1024x768x32
|
|---|
| 74 | smp: found 1 cpu
|
|---|
| 75 | smp: apic_phys = 0xfee00000
|
|---|
| 76 | smp: ioapic_phys = 0xfec00000
|
|---|
| 77 | smp: apic = 0x80714000
|
|---|
| 78 | smp: ioapic = 0x80715000
|
|---|
| 79 | APIC ticks/sec = 64479944
|
|---|
| 80 | kernel entry at 800396d8
|
|---|
| 81 | Welcome to kernel debugger output!
|
|---|
| 82 | Haiku revision: 27057
|
|---|
| 83 | CPU 0: type 0 family 6 extended_family 0 model 15 extended_model 0 stepping 8, string 'GenuineIntel'
|
|---|
| 84 | CPU 0: vendor 'Intel' model name 'Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz'
|
|---|
| 85 | CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss sse3 dscpl
|
|---|
| 86 | heap_add_area: area -1 added to small heap 0x90b5c000 - usable range 0x90b69000 - 0x9135c000
|
|---|
| 87 | heap_add_area: area -1 added to medium heap 0x9135c000 - usable range 0x9135d000 - 0x91828000
|
|---|
| 88 | heap_add_area: area -1 added to large heap 0x91828ccc - usable range 0x9182a000 - 0x91b5c000
|
|---|
| 89 | slab: init base 0x91b5c000 + 0x2000
|
|---|
| 90 | vm_mark_page_range_inuse: page 0x9f in non-free state 7!
|
|---|
| 91 | Could not register image "usb_disk": Bad argument type passed to function
|
|---|
| 92 | initialize_commpage_syscall(): sysenter/sysexit supported
|
|---|
| 93 | allocate_commpage_entry(3, 5) -> 0xffff0100
|
|---|
| 94 | arch_init_timer: using APIC timer.
|
|---|
| 95 | allocate_commpage_entry(2, 12) -> 0xffff0108
|
|---|
| 96 | apm_init()
|
|---|
| 97 | code32: 0xf000, 0x5643, length 0xffff
|
|---|
| 98 | code16: 0xf000, length 0xffff
|
|---|
| 99 | data: 0x40, length 0xffff
|
|---|
| 100 | heap_add_area: area -1 added to grow heap 0x80300000 - usable range 0x80302000 - 0x80400000
|
|---|
| 101 | heap_add_area: area -1 added to VIP I/O heap heap 0x80400000 - usable range 0x80402000 - 0x80500000
|
|---|
| 102 | vip_io_request_allocator_init(): created VIP I/O heap: 0x80400000
|
|---|
| 103 | PCI: pci_module_init
|
|---|
| 104 | PCI: mechanism 1 controller found
|
|---|
| 105 | PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0080 to 0x008c
|
|---|
| 106 | PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7190, revision 01
|
|---|
| 107 | PCI: class_base 06, class_function 00, class_api 00
|
|---|
| 108 | PCI: vendor 8086: Intel Corporation
|
|---|
| 109 | PCI: device 7190: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (Virtual Machine Chipset)
|
|---|
| 110 | PCI: info: Bridge (Host bridge)
|
|---|
| 111 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 112 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 113 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 114 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 115 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 116 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 117 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 118 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 119 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 120 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 121 | PCI: Capabilities: (empty list)
|
|---|
| 122 | PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7191, revision 01
|
|---|
| 123 | PCI: class_base 06, class_function 04, class_api 00
|
|---|
| 124 | PCI: vendor 8086: Intel Corporation
|
|---|
| 125 | PCI: device 7191: 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
|
|---|
| 126 | PCI: info: Bridge (PCI bridge, Normal decode)
|
|---|
| 127 | PCI: line_size 00, latency 00, header_type 01, BIST 00
|
|---|
| 128 | PCI: subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 129 | PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 40
|
|---|
| 130 | PCI: io_base_upper_16 0000, io_base f0
|
|---|
| 131 | PCI: io_limit_upper_16 0000, io_limit 00
|
|---|
| 132 | PCI: memory_base fff0, memory_limit 0000
|
|---|
| 133 | PCI: prefetchable_memory_base_upper32 00000000, prefetchable_memory_base fff0
|
|---|
| 134 | PCI: prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit 0000
|
|---|
| 135 | PCI: bridge_control 0080, secondary_status 02a0
|
|---|
| 136 | PCI: interrupt_line 00, interrupt_pin 00
|
|---|
| 137 | PCI: ROM base host 00000000, pci 00000000, size ??
|
|---|
| 138 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 139 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 140 | PCI: Capabilities: (not supported)
|
|---|
| 141 | PCI: [dom 0, bus 0] bus 0, device 7, function 0: vendor 8086, device 7110, revision 08
|
|---|
| 142 | PCI: class_base 06, class_function 01, class_api 00
|
|---|
| 143 | PCI: vendor 8086: Intel Corporation
|
|---|
| 144 | PCI: device 7110: 82371AB/EB/MB PIIX4 ISA (Virtual Machine Chipset)
|
|---|
| 145 | PCI: info: Bridge (ISA bridge)
|
|---|
| 146 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 147 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 148 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 149 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 150 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 151 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 152 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 153 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 154 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 155 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 156 | PCI: Capabilities: (not supported)
|
|---|
| 157 | PCI: [dom 0, bus 0] bus 0, device 7, function 1: vendor 8086, device 7111, revision 01
|
|---|
| 158 | PCI: class_base 01, class_function 01, class_api 8a
|
|---|
| 159 | PCI: vendor 8086: Intel Corporation
|
|---|
| 160 | PCI: device 7111: 82371AB/EB/MB PIIX4 IDE (Virtual Machine Chipset)
|
|---|
| 161 | PCI: info: Mass storage controller (IDE interface)
|
|---|
| 162 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
|---|
| 163 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 164 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 165 | PCI: interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 166 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 167 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 168 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 169 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 170 | PCI: base reg 4: host 00001050, pci 00001050, size 00000010, flags 01
|
|---|
| 171 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 172 | PCI: Capabilities: (not supported)
|
|---|
| 173 | PCI: [dom 0, bus 0] bus 0, device 7, function 2: vendor 8086, device 7112, revision 00
|
|---|
| 174 | PCI: class_base 0c, class_function 03, class_api 00
|
|---|
| 175 | PCI: vendor 8086: Intel Corporation
|
|---|
| 176 | PCI: device 7112: 82371AB/EB/MB PIIX4 USB (Virtual Machine Chipset)
|
|---|
| 177 | PCI: info: Serial bus controller (USB Controller, UHCI)
|
|---|
| 178 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
|---|
| 179 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 180 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 181 | PCI: interrupt_line 09, interrupt_pin 04, min_grant 00, max_latency 00
|
|---|
| 182 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 183 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 184 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 185 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 186 | PCI: base reg 4: host 00001060, pci 00001060, size 00000020, flags 01
|
|---|
| 187 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 188 | PCI: Capabilities: (not supported)
|
|---|
| 189 | PCI: [dom 0, bus 0] bus 0, device 7, function 3: vendor 8086, device 7113, revision 08
|
|---|
| 190 | PCI: class_base 06, class_function 80, class_api 00
|
|---|
| 191 | PCI: vendor 8086: Intel Corporation
|
|---|
| 192 | PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI (Virtual Machine Chipset)
|
|---|
| 193 | PCI: info: Bridge
|
|---|
| 194 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 195 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 196 | PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad
|
|---|
| 197 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 198 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 199 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 200 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 201 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 202 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 203 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 204 | PCI: Capabilities: (not supported)
|
|---|
| 205 | PCI: [dom 0, bus 0] bus 0, device 15, function 0: vendor 15ad, device 0405, revision 00
|
|---|
| 206 | PCI: class_base 03, class_function 00, class_api 00
|
|---|
| 207 | PCI: vendor 15ad: VMware Inc
|
|---|
| 208 | PCI: device 0405: Abstract SVGA II Adapter
|
|---|
| 209 | PCI: info: Display controller (VGA compatible controller, VGA controller)
|
|---|
| 210 | PCI: line_size 08, latency 40, header_type 00, BIST 00
|
|---|
| 211 | PCI: ROM base host 00000000, pci 00000000, size 00008000
|
|---|
| 212 | PCI: cardbus_CIS 00000000, subsystem_id 0405, subsystem_vendor_id 15ad
|
|---|
| 213 | PCI: interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 214 | PCI: base reg 0: host 000010c0, pci 000010c0, size 00000010, flags 01
|
|---|
| 215 | PCI: base reg 1: host f0000000, pci f0000000, size 08000000, flags 00
|
|---|
| 216 | PCI: base reg 2: host e8000000, pci e8000000, size 00800000, flags 00
|
|---|
| 217 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 218 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 219 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 220 | PCI: Capabilities: (empty list)
|
|---|
| 221 | PCI: [dom 0, bus 0] bus 0, device 16, function 0: vendor 8086, device 100f, revision 01
|
|---|
| 222 | PCI: class_base 02, class_function 00, class_api 00
|
|---|
| 223 | PCI: vendor 8086: Intel Corporation
|
|---|
| 224 | PCI: device 100f: 82545EM Gigabit Ethernet Controller (Copper) (Abstract PRO/1000 MT Single Port Adapter)
|
|---|
| 225 | PCI: info: Network controller (Ethernet controller)
|
|---|
| 226 | PCI: line_size 10, latency 00, header_type 00, BIST 00
|
|---|
| 227 | PCI: ROM base host 00000000, pci 00000000, size 00010000
|
|---|
| 228 | PCI: cardbus_CIS 00000000, subsystem_id 0750, subsystem_vendor_id 15ad
|
|---|
| 229 | PCI: interrupt_line 0b, interrupt_pin 01, min_grant ff, max_latency 00
|
|---|
| 230 | PCI: base reg 0: host e8820000, pci e8820000, size 00020000, flags 04
|
|---|
| 231 | PCI: base reg 1: host 00000000, pci 00000000, size 00000010, flags 0f
|
|---|
| 232 | PCI: base reg 2: host e8800000, pci e8800000, size 00010000, flags 04
|
|---|
| 233 | PCI: base reg 3: host 00000000, pci 00000000, size 00000010, flags 0f
|
|---|
| 234 | PCI: base reg 4: host 000010d0, pci 000010d0, size 00000010, flags 09
|
|---|
| 235 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 236 | PCI: Capabilities: PM, PCI-X
|
|---|
| 237 | PCI: [dom 0, bus 0] bus 0, device 17, function 0: vendor 1274, device 1371, revision 02
|
|---|
| 238 | PCI: class_base 04, class_function 01, class_api 00
|
|---|
| 239 | PCI: vendor 1274: Ensoniq
|
|---|
| 240 | PCI: device 1371: ES1371 [AudioPCI-97] (Creative Sound Blaster AudioPCI64V, AudioPCI128)
|
|---|
| 241 | PCI: info: Multimedia controller (Multimedia audio controller)
|
|---|
| 242 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
|---|
| 243 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 244 | PCI: cardbus_CIS 00000000, subsystem_id 1371, subsystem_vendor_id 1274
|
|---|
| 245 | PCI: interrupt_line 0a, interrupt_pin 01, min_grant 06, max_latency ff
|
|---|
| 246 | PCI: base reg 0: host 00001080, pci 00001080, size 00000040, flags 01
|
|---|
| 247 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 248 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 249 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 250 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 251 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 252 | PCI: Capabilities: (not supported)
|
|---|
| 253 | usb_uhci: successfully started the controller
|
|---|
| 254 | usb_ohci: no devices found
|
|---|
| 255 | usb_ehci: no devices found
|
|---|
| 256 | get_boot_partitions(): boot volume message:
|
|---|
| 257 | KMessage: buffer: 0x80710b2c (size/capacity: 316/316), flags: 0x0lx
|
|---|
| 258 | field: "booted from image" (BOOL): false
|
|---|
| 259 | field: "partition offset" (LLNG): 0 (0x0)
|
|---|
| 260 | field: "boot method" (LONG): 0 (0x0)
|
|---|
| 261 | field: "boot drive number" (LLNG): 128 (0x80)
|
|---|
| 262 | field: "disk identifier" (RAWT): data at 0x80710c18, 80 bytes
|
|---|
| 263 | get_boot_partitions(): boot method type: 0
|
|---|
| 264 | partitioning system: partitioning_systems/intel/extended/v1
|
|---|
| 265 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1)
|
|---|
| 266 | intel: ep_std_ops(0x1)
|
|---|
| 267 | intel: ep_std_ops(0x2)
|
|---|
| 268 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 269 | partitioning system: partitioning_systems/intel/map/v1
|
|---|
| 270 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1)
|
|---|
| 271 | intel: pm_std_ops(0x1)
|
|---|
| 272 | intel: pm_std_ops(0x2)
|
|---|
| 273 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 274 | file system: file_systems/bfs/v1
|
|---|
| 275 | KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1)
|
|---|
| 276 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 277 | file system: file_systems/devfs/v1
|
|---|
| 278 | KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1)
|
|---|
| 279 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 280 | file system: file_systems/rootfs/v1
|
|---|
| 281 | KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1)
|
|---|
| 282 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 283 | number of disk systems: 5
|
|---|
| 284 | KDiskDeviceManager::_Scan(/dev/disk)
|
|---|
| 285 | PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
|
|---|
| 286 | PCI-IDE: init channel...
|
|---|
| 287 | PCI-IDE: channel index 0
|
|---|
| 288 | PCI-IDE: bus master base 0x1050
|
|---|
| 289 | PCI-IDE: init channel done
|
|---|
| 290 | IDE: scan_device_worker: bus 0x90b777f8, device-number 0
|
|---|
| 291 | IDE: create_device: bus 0x90b777f8, device-number 0
|
|---|
| 292 | IDE: setup_device_links: bus 0x90b777f8, device 0x9137ef00
|
|---|
| 293 | IDE: scan_device_int: device 0x9137ef00, atapi 0
|
|---|
| 294 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 295 | IDE: scan_device_int: got a fast response
|
|---|
| 296 | IDE: scan_device_int: device found
|
|---|
| 297 | IDE: scan_device_worker: bus 0x90b777f8, device-number 1
|
|---|
| 298 | IDE: create_device: bus 0x90b777f8, device-number 1
|
|---|
| 299 | IDE: setup_device_links: bus 0x90b777f8, device 0x9137f2e0
|
|---|
| 300 | IDE: scan_device_int: device 0x9137f2e0, atapi 0
|
|---|
| 301 | IDE: scan_device_int: send_command failed
|
|---|
| 302 | IDE: scan_device_int: device 0x9137f2e0, atapi 1
|
|---|
| 303 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 304 | IDE: scan_device_int: no fast response to inquiry
|
|---|
| 305 | IDE: scan_device_int: status 0x00
|
|---|
| 306 | IDE: scan_device_int: busy bit not set after 100ms - probably noone there
|
|---|
| 307 | IDE: scan_device_int: aborting because busy bit not set
|
|---|
| 308 | IDE: destroy_device: device 0x9137f2e0
|
|---|
| 309 | IDE: cleanup_device_links: device 0x9137f2e0
|
|---|
| 310 | IDE: scan_device_worker: bus 0x90b777f8, device-number 0
|
|---|
| 311 | IDE: destroy_device: device 0x9137ef00
|
|---|
| 312 | IDE: cleanup_device_links: device 0x9137ef00
|
|---|
| 313 | IDE: create_device: bus 0x90b777f8, device-number 0
|
|---|
| 314 | IDE: setup_device_links: bus 0x90b777f8, device 0x9137ef00
|
|---|
| 315 | IDE: scan_device_int: device 0x9137ef00, atapi 0
|
|---|
| 316 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 317 | IDE: scan_device_int: got a fast response
|
|---|
| 318 | IDE: scan_device_int: device found
|
|---|
| 319 | IDE: scan_device_worker: bus 0x90b777f8, device-number 1
|
|---|
| 320 | IDE: create_device: bus 0x90b777f8, device-number 1
|
|---|
| 321 | IDE: setup_device_links: bus 0x90b777f8, device 0x9137f2e0
|
|---|
| 322 | IDE: scan_device_int: device 0x9137f2e0, atapi 0
|
|---|
| 323 | IDE: scan_device_int: send_command failed
|
|---|
| 324 | IDE: scan_device_int: device 0x9137f2e0, atapi 1
|
|---|
| 325 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 326 | IDE: scan_device_int: no fast response to inquiry
|
|---|
| 327 | IDE: scan_device_int: status 0x00
|
|---|
| 328 | IDE: scan_device_int: busy bit not set after 100ms - probably noone there
|
|---|
| 329 | IDE: scan_device_int: aborting because busy bit not set
|
|---|
| 330 | IDE: destroy_device: device 0x9137f2e0
|
|---|
| 331 | IDE: cleanup_device_links: device 0x9137f2e0
|
|---|
| 332 | publish device: node 0x90b84820, path disk/ata/0/master/raw, module drivers/disk/scsi/scsi_disk/device_v1
|
|---|
| 333 | PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
|
|---|
| 334 | PCI-IDE: init channel...
|
|---|
| 335 | PCI-IDE: channel index 1
|
|---|
| 336 | PCI-IDE: bus master base 0x1058
|
|---|
| 337 | PCI-IDE: init channel done
|
|---|
| 338 | IDE: scan_device_worker: bus 0x90b778c4, device-number 0
|
|---|
| 339 | IDE: create_device: bus 0x90b778c4, device-number 0
|
|---|
| 340 | IDE: setup_device_links: bus 0x90b778c4, device 0x9137f2e0
|
|---|
| 341 | IDE: scan_device_int: device 0x9137f2e0, atapi 0
|
|---|
| 342 | IDE: scan_device_int: send_command failed
|
|---|
| 343 | IDE: destroy_device: device 0x9137f2e0
|
|---|
| 344 | IDE: cleanup_device_links: device 0x9137f2e0
|
|---|
| 345 | IDE: scan_device_worker: bus 0x90b778c4, device-number 1
|
|---|
| 346 | IDE: create_device: bus 0x90b778c4, device-number 1
|
|---|
| 347 | IDE: setup_device_links: bus 0x90b778c4, device 0x9137f2e0
|
|---|
| 348 | IDE: scan_device_int: device 0x9137f2e0, atapi 0
|
|---|
| 349 | IDE: scan_device_int: send_command failed
|
|---|
| 350 | IDE: destroy_device: device 0x9137f2e0
|
|---|
| 351 | IDE: cleanup_device_links: device 0x9137f2e0
|
|---|
| 352 | IDE: scan_device_worker: bus 0x90b778c4, device-number 0
|
|---|
| 353 | IDE: create_device: bus 0x90b778c4, device-number 0
|
|---|
| 354 | IDE: setup_device_links: bus 0x90b778c4, device 0x9137f2e0
|
|---|
| 355 | IDE: scan_device_int: device 0x9137f2e0, atapi 0
|
|---|
| 356 | IDE: scan_device_int: send_command failed
|
|---|
| 357 | IDE: destroy_device: device 0x9137f2e0
|
|---|
| 358 | IDE: cleanup_device_links: device 0x9137f2e0
|
|---|
| 359 | IDE: scan_device_worker: bus 0x90b778c4, device-number 1
|
|---|
| 360 | IDE: create_device: bus 0x90b778c4, device-number 1
|
|---|
| 361 | IDE: setup_device_links: bus 0x90b778c4, device 0x9137f2e0
|
|---|
| 362 | IDE: scan_device_int: device 0x9137f2e0, atapi 0
|
|---|
| 363 | IDE: scan_device_int: send_command failed
|
|---|
| 364 | IDE: destroy_device: device 0x9137f2e0
|
|---|
| 365 | IDE: cleanup_device_links: device 0x9137f2e0
|
|---|
| 366 | [35mahci:[0m ahci_supports_device
|
|---|
| 367 | [35mahci:[0m ahci_supports_device
|
|---|
| 368 | KDiskDeviceManager::_Scan(/dev/disk/ata)
|
|---|
| 369 | KDiskDeviceManager::_Scan(/dev/disk/ata/0)
|
|---|
| 370 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master)
|
|---|
| 371 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw)
|
|---|
| 372 | found device: /dev/disk/ata/0/master/raw
|
|---|
| 373 | DMAResource@0x90b84870: low/high 0/ffffffff, max segment count 512, align 2, boundary 65536, max transfer 130560, max segment size 33554432
|
|---|
| 374 | dma buffer restrictions not yet implemented: boundary 65536
|
|---|
| 375 | Last message repeated 31 times.
|
|---|
| 376 | KDiskDeviceManager::_ScanPartition(/dev/disk/ata/0/master/raw)
|
|---|
| 377 | intel: ep_std_ops(0x1)
|
|---|
| 378 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 379 | returned: -1
|
|---|
| 380 | intel: ep_std_ops(0x2)
|
|---|
| 381 | intel: pm_std_ops(0x1)
|
|---|
| 382 | trying: partitioning_systems/intel/map/v1
|
|---|
| 383 | intel: pm_identify_partition(0, 0: 0, 268369920, 512)
|
|---|
| 384 | Partition::SetTo(): active: 6f
|
|---|
| 385 | Partition::CheckLocation() - end after session: 1983497949184 (session: 268369920)
|
|---|
| 386 | intel: _ParsePrimary(): partition 0: bad location, ignoring
|
|---|
| 387 | Partition::SetTo(): active: 74
|
|---|
| 388 | Partition::SetTo(): active: 0
|
|---|
| 389 | Partition::SetTo(): active: 0
|
|---|
| 390 | returned: 0.5
|
|---|
| 391 | trying: file_systems/bfs/v1
|
|---|
| 392 | returned: 0.8
|
|---|
| 393 | intel: pm_std_ops(0x2)
|
|---|
| 394 | trying: file_systems/devfs/v1
|
|---|
| 395 | returned: -1
|
|---|
| 396 | trying: file_systems/rootfs/v1
|
|---|
| 397 | returned: -1
|
|---|
| 398 | scanning with: file_systems/bfs/v1
|
|---|
| 399 | device 0: /dev/disk/ata/0/master/raw
|
|---|
| 400 | media status: No error
|
|---|
| 401 | device flags: 2
|
|---|
| 402 | offset: 0
|
|---|
| 403 | size: 268369920 (255.937 MB)
|
|---|
| 404 | content size: 268367872
|
|---|
| 405 | block size: 2048
|
|---|
| 406 | child count: 0
|
|---|
| 407 | index: -1
|
|---|
| 408 | status: 0
|
|---|
| 409 | flags: 3
|
|---|
| 410 | volume: -1
|
|---|
| 411 | disk system: file_systems/bfs/v1
|
|---|
| 412 | name: <NULL>
|
|---|
| 413 | content name: Haiku
|
|---|
| 414 | type: <NULL>
|
|---|
| 415 | content type: Be File System
|
|---|
| 416 | params: <NULL>
|
|---|
| 417 | content params: <NULL>
|
|---|
| 418 | bfs: mounted "Haiku" (root node at 2057, device = /dev/disk/ata/0/master/raw)
|
|---|
| 419 | module: Search for file_cache/launch_speedup/v1 failed.
|
|---|
| 420 | partitioning system: partitioning_systems/session/v1
|
|---|
| 421 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1)
|
|---|
| 422 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 423 | file system: file_systems/cdda/v1
|
|---|
| 424 | KDiskDeviceManager::_AddDiskSystem(file_systems/cdda/v1)
|
|---|
| 425 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 426 | file system: file_systems/ext2/v1
|
|---|
| 427 | KDiskDeviceManager::_AddDiskSystem(file_systems/ext2/v1)
|
|---|
| 428 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 429 | file system: file_systems/fat/v1
|
|---|
| 430 | KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1)
|
|---|
| 431 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 432 | file system: file_systems/iso9660/v1
|
|---|
| 433 | KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1)
|
|---|
| 434 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 435 | KDiskDeviceManager::_Scan(/dev/disk)
|
|---|
| 436 | con_init: trying module console/frame_buffer/v1
|
|---|
| 437 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/console
|
|---|
| 438 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/dprintf
|
|---|
| 439 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/keyboard
|
|---|
| 440 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/null
|
|---|
| 441 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/random
|
|---|
| 442 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/tty
|
|---|
| 443 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/zero
|
|---|
| 444 | [35mahci:[0m ahci_supports_device
|
|---|
| 445 | [35mahci:[0m ahci_supports_device
|
|---|
| 446 | KDiskDeviceManager::_Scan(/dev/disk/ata)
|
|---|
| 447 | KDiskDeviceManager::_Scan(/dev/disk/ata/0)
|
|---|
| 448 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master)
|
|---|
| 449 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw)
|
|---|
| 450 | KDiskDeviceManager::_Scan(/dev/disk/floppy)
|
|---|
| 451 | config_manager: driver module: init
|
|---|
| 452 | driver_get_next_device_info(bus = 0, cookie = 0)
|
|---|
| 453 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/floppy/pc_floppy
|
|---|
| 454 | KDiskDeviceManager::_Scan(/dev/disk/usb)
|
|---|
| 455 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/usb/usb_disk
|
|---|
| 456 | KDiskDeviceManager::_Scan(/dev/disk/virtual)
|
|---|
| 457 | nbd:>init_hardware()
|
|---|
| 458 | nbd:>init_driver()
|
|---|
| 459 | allocate_commpage_entry(4, 34) -> 0xffff0118
|
|---|
| 460 | set_memory_write_back base 0 length 40000000
|
|---|
| 461 | find_nearest 40000000 0
|
|---|
| 462 | solutions: 0x40000000
|
|---|
| 463 | allocate MTRR slot 0, base = 0, length = 40000000, type=0x6
|
|---|
| 464 | kernel debugger extension "debugger/disasm/v1": loaded
|
|---|
| 465 | kernel debugger extension "debugger/hangman/v1": loaded
|
|---|
| 466 | kernel debugger extension "debugger/invalidate_on_exit/v1": loaded
|
|---|
| 467 | allocate MTRR slot 1, base = f0000000, length = 400000, type=0x1
|
|---|
| 468 | REG: Failed to open shadow passwd DB file "/etc/shadow": No such file or directory
|
|---|
| 469 | bfs: bfs_open_dir:1471: Invalid Argument
|
|---|
| 470 | register_domain(1, internet)
|
|---|
| 471 | unregister_domain(0x90bc961c, 1, internet)
|
|---|
| 472 | register_domain(9, unix)
|
|---|
| 473 | unregister_domain(0x90bc9a18, 9, unix)
|
|---|
| 474 | register_domain(1, internet)
|
|---|
| 475 | get_device_interface: ask "network/devices/ethernet/v1" for loop
|
|---|
| 476 | get_device_interface: ask "network/devices/loopback/v1" for loop
|
|---|
| 477 | 3com: init_hardware(0x8055f8f8)
|
|---|
| 478 | 3com: no hardware found.
|
|---|
| 479 | etherpci: init_driver init_driver: etherpci not found
|
|---|
| 480 | ipro100: init_hardware(0x8055cec4)
|
|---|
| 481 | ipro100: no hardware found.
|
|---|
| 482 | ipro1000: init_hardware(0x80789764)
|
|---|
| 483 | ipro1000, found Intel(R) PRO/1000 Network Connection Version - 6.5.3 at 7
|
|---|
| 484 | ipro1000: init_driver(0x80789764)
|
|---|
| 485 | [ipro1000] (em) Memory Access and/or Bus Master bits were not set!
|
|---|
| 486 | [ipro1000] (em) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1, 0x2)
|
|---|
| 487 | [ipro1000] (em) bus_alloc_resource(4, [32], 0x0, 0xffffffff, 0x1, 0x2)
|
|---|
| 488 | [ipro1000] (em) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1, 0x6)
|
|---|
| 489 | if_initname(0x9137f6c0, em, 3)
|
|---|
| 490 | [ipro1000] ipro1000: /dev/net/ipro1000/0
|
|---|
| 491 | Adding entry for Ethernet 10baseT/UTP
|
|---|
| 492 | Adding entry for Ethernet 10baseT/UTP <full-duplex>
|
|---|
| 493 | Adding entry for Ethernet 100baseTX
|
|---|
| 494 | Adding entry for Ethernet 100baseTX <full-duplex>
|
|---|
| 495 | Adding entry for Ethernet 1000baseTX <full-duplex>
|
|---|
| 496 | Adding entry for Ethernet 1000baseTX
|
|---|
| 497 | Adding entry for Ethernet autoselect
|
|---|
| 498 | ifmedia_set: target Ethernet autoselect
|
|---|
| 499 | ifmedia_set: setting to Ethernet autoselect
|
|---|
| 500 | [ipro1000] (em) Link is up 1000 Mbps Full Duplex
|
|---|
| 501 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/ipro1000
|
|---|
| 502 | marvell_yukon: init_hardware(0x807a2c1c)
|
|---|
| 503 | marvell_yukon: no hardware found.
|
|---|
| 504 | nforce: init_hardware(0x8079fc98)
|
|---|
| 505 | nforce: no hardware found.
|
|---|
| 506 | rtl8139: init_hardware(0x8079be80)
|
|---|
| 507 | rtl8139: no hardware found.
|
|---|
| 508 | syskonnect: init_hardware(0x807a2238)
|
|---|
| 509 | syskonnect: no hardware found.
|
|---|
| 510 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/usb_ecm
|
|---|
| 511 | via_rhine: init_hardware(0x8079c1d8)
|
|---|
| 512 | via_rhine: no hardware found.
|
|---|
| 513 | bfs: bfs_open_dir:1471: Invalid Argument
|
|---|
| 514 | get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/ipro1000/0
|
|---|
| 515 | ipv4_datalink_init(/dev/net/ipro1000/0)
|
|---|
| 516 | [net/ipro1000/0] compat_open(0x2)
|
|---|
| 517 | ifmedia_ioctl: switching em to Ethernet autoselect
|
|---|
| 518 | /dev/net/ipro1000/0: media change, media 0x900030 quality 1000 speed 1000000
|
|---|
| 519 | register_domain(4, link)
|
|---|
| 520 | intel_extreme: init_hardware()
|
|---|
| 521 | Radeon - init_hardware: Version: 5.1.6.0
|
|---|
| 522 | Radeon - Radeon_CardDetect: no supported devices found
|
|---|
| 523 | S3: init_hardware() - no supported devices
|
|---|
| 524 | vesa: init_hardware()
|
|---|
| 525 | vesa: init_driver()
|
|---|
| 526 | vesa: publish_devices()
|
|---|
| 527 | vesa: find_device()
|
|---|
| 528 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/graphics/vesa
|
|---|
| 529 | vesa: vesa_init() completed successfully!
|
|---|
| 530 | vesa: acc: vesa.accelerant
|
|---|
| 531 | allocate MTRR slot 1, base = f0000000, length = 400000, type=0x1
|
|---|
| 532 | emuxki: init_hardware()
|
|---|
| 533 | ps2_hid: init_hardware
|
|---|
| 534 | ps2_hid: init_driver
|
|---|
| 535 | ps2_hid: publish_devices
|
|---|
| 536 | ps2_hid: uninit_driver
|
|---|
| 537 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/ps2_hid
|
|---|
| 538 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/usb_hid
|
|---|
| 539 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/wacom
|
|---|
| 540 | cx23882: init_hardware()
|
|---|
| 541 | bfs: bfs_open_dir:1471: Invalid Argument
|
|---|
| 542 | auich: init_hardware()
|
|---|
| 543 | auvia: init_hardware()
|
|---|
| 544 | echo3g: init_hardware()
|
|---|
| 545 | echo3g: no card found
|
|---|
| 546 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/audio/hmulti/emuxki
|
|---|
| 547 | [35mahci:[0m ahci_supports_device
|
|---|
| 548 | [35mahci:[0m ahci_supports_device
|
|---|
| 549 | firewire: fw_module_init
|
|---|
| 550 | firewire: found 0 cards
|
|---|
| 551 | firewire: fw_module_uninit
|
|---|
| 552 | loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/bus/usb_raw
|
|---|
| 553 | ps2: devfs_publish_device input/mouse/ps2/0, status = 0x00000000
|
|---|
| 554 | ps2: probe_mouse Extended PS/2 mouse found
|
|---|
| 555 | Running post install script /boot/common/boot/post_install/mime_update.sh ...
|
|---|
| 556 | ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000
|
|---|
| 557 | ps2: keyboard found
|
|---|
| 558 | usb_uhci: td (0x02c63600) error: status: 0x204407ff; token: 0x00008369;
|
|---|
| 559 | usb_disk: device reports a lun count of 1
|
|---|
| 560 | usb_disk: vendor_identification " "
|
|---|
| 561 | usb_disk: product_identification "USB DISK 2.0 "
|
|---|
| 562 | usb_disk: product_revision_level "PMAP"
|
|---|
| 563 | KDiskDeviceManager::_ScanPartition(/dev/disk/usb/0/0/raw)
|
|---|
| 564 | intel: ep_std_ops(0x1)
|
|---|
| 565 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 566 | returned: -1
|
|---|
| 567 | intel: ep_std_ops(0x2)
|
|---|
| 568 | intel: pm_std_ops(0x1)
|
|---|
| 569 | trying: partitioning_systems/intel/map/v1
|
|---|
| 570 | intel: pm_identify_partition(6, 1: 0, 515899392, 512)
|
|---|
| 571 | Partition::SetTo(): active: 0
|
|---|
| 572 | Last message repeated 3 times.
|
|---|
| 573 | returned: 0.81
|
|---|
| 574 | trying: file_systems/bfs/v1
|
|---|
| 575 | returned: 0.8
|
|---|
| 576 | trying: file_systems/devfs/v1
|
|---|
| 577 | returned: -1
|
|---|
| 578 | trying: file_systems/rootfs/v1
|
|---|
| 579 | returned: -1
|
|---|
| 580 | trying: partitioning_systems/session/v1
|
|---|
| 581 | returned: -1
|
|---|
| 582 | trying: file_systems/cdda/v1
|
|---|
| 583 | usb_disk: unhandled ioctl 10102
|
|---|
| 584 | returned: -1
|
|---|
| 585 | trying: file_systems/ext2/v1
|
|---|
| 586 | returned: -2147483648
|
|---|
| 587 | trying: file_systems/fat/v1
|
|---|
| 588 | returned: -1
|
|---|
| 589 | trying: file_systems/iso9660/v1
|
|---|
| 590 | identify(6, 0x90c4fc20)
|
|---|
| 591 | returned: -1
|
|---|
| 592 | scanning with: partitioning_systems/intel/map/v1
|
|---|
| 593 | intel: pm_scan_partition(6, 1: 0, 515899392, 512)
|
|---|
| 594 | KDiskDeviceManager::_ScanPartition(/dev/disk/usb/0/0/0)
|
|---|
| 595 | intel: ep_std_ops(0x1)
|
|---|
| 596 | trying: partitioning_systems/intel/extended/v1
|
|---|
| 597 | intel: ep_identify_partition(6, 31744, 515490816, 512)
|
|---|
| 598 | returned: -1
|
|---|
| 599 | intel: ep_std_ops(0x2)
|
|---|
| 600 | trying: partitioning_systems/intel/map/v1
|
|---|
| 601 | intel: pm_identify_partition(6, 2: 31744, 515490816, 512)
|
|---|
| 602 | Partition::SetTo(): active: 0
|
|---|
| 603 | Last message repeated 3 times.
|
|---|
| 604 | returned: 0.1
|
|---|
| 605 | trying: file_systems/bfs/v1
|
|---|
| 606 | returned: -1
|
|---|
| 607 | trying: file_systems/devfs/v1
|
|---|
| 608 | returned: -1
|
|---|
| 609 | trying: file_systems/rootfs/v1
|
|---|
| 610 | returned: -1
|
|---|
| 611 | trying: partitioning_systems/session/v1
|
|---|
| 612 | returned: -1
|
|---|
| 613 | trying: file_systems/cdda/v1
|
|---|
| 614 | usb_disk: unhandled ioctl 10102
|
|---|
| 615 | returned: -1
|
|---|
| 616 | trying: file_systems/ext2/v1
|
|---|
| 617 | returned: -2147483648
|
|---|
| 618 | trying: file_systems/fat/v1
|
|---|
| 619 | returned: 0.8
|
|---|
| 620 | trying: file_systems/iso9660/v1
|
|---|
| 621 | identify(6, 0x90c4fc30)
|
|---|
| 622 | returned: -1
|
|---|
| 623 | scanning with: file_systems/fat/v1
|
|---|
| 624 | usb_disk: unhandled ioctl 22
|
|---|
| 625 | usb_disk: unhandled ioctl 23
|
|---|
| 626 | usb_disk: unhandled ioctl 13
|
|---|
| 627 | usb_disk: unhandled ioctl 22
|
|---|
| 628 | usb_disk: unhandled ioctl 23
|
|---|
| 629 | usb_disk: unhandled ioctl 22
|
|---|
| 630 | usb_disk: unhandled ioctl 23
|
|---|
| 631 | usb_uhci: td (0x02c6ec00) error: status: 0x394007ff; token: 0x01888269;
|
|---|
| 632 | usb_uhci: td (0x02c6ec60) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 633 | usb_disk: receiving the command status wrapper failed
|
|---|
| 634 | usb_disk: unhandled ioctl 13
|
|---|
| 635 | usb_disk: unhandled ioctl 22
|
|---|
| 636 | usb_disk: unhandled ioctl 23
|
|---|
| 637 | usb_uhci: td (0x02c6ede0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 638 | usb_uhci: td (0x02c6ef60) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 639 | usb_disk: receiving the command status wrapper failed
|
|---|
| 640 | intel: pm_std_ops(0x2)
|
|---|
| 641 | Media removed from /dev/disk/usb/0/0/raw
|
|---|
| 642 | usb_uhci: td (0x02c6f440) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 643 | usb_uhci: td (0x02c6f4a0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 644 | usb_disk: receiving the command status wrapper failed
|
|---|
| 645 | usb_uhci: td (0x02c6f860) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 646 | usb_uhci: td (0x02c6f8c0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 647 | usb_disk: receiving the command status wrapper failed
|
|---|
| 648 | usb_uhci: td (0x02c6fc80) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 649 | usb_uhci: td (0x02c6fce0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 650 | usb_disk: receiving the command status wrapper failed
|
|---|
| 651 | usb_uhci: td (0x02c700a0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 652 | usb_uhci: td (0x02c70100) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 653 | usb_disk: receiving the command status wrapper failed
|
|---|
| 654 | usb_uhci: td (0x02c704c0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 655 | usb_uhci: td (0x02c70520) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 656 | usb_disk: receiving the command status wrapper failed
|
|---|
| 657 | usb_uhci: td (0x02c708e0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 658 | usb_uhci: td (0x02c70940) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 659 | usb_disk: receiving the command status wrapper failed
|
|---|
| 660 | usb_uhci: td (0x02c70d00) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 661 | usb_uhci: td (0x02c70d60) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 662 | usb_disk: receiving the command status wrapper failed
|
|---|
| 663 | usb_uhci: td (0x02c71120) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 664 | usb_uhci: td (0x02c71180) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 665 | usb_disk: receiving the command status wrapper failed
|
|---|
| 666 | usb_uhci: td (0x02c71540) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 667 | usb_uhci: td (0x02c715a0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 668 | usb_disk: receiving the command status wrapper failed
|
|---|
| 669 | usb_uhci: td (0x02c71960) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 670 | usb_uhci: td (0x02c719c0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 671 | usb_disk: receiving the command status wrapper failed
|
|---|
| 672 | usb_uhci: td (0x02c71d80) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 673 | usb_uhci: td (0x02c71de0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 674 | usb_disk: receiving the command status wrapper failed
|
|---|
| 675 | usb_uhci: td (0x02c721a0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 676 | usb_uhci: td (0x02c72200) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 677 | usb_disk: receiving the command status wrapper failed
|
|---|
| 678 | usb_uhci: td (0x02c725c0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 679 | usb_uhci: td (0x02c72620) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 680 | usb_disk: receiving the command status wrapper failed
|
|---|
| 681 | usb_uhci: td (0x02c729e0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 682 | usb_uhci: td (0x02c72a40) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 683 | usb_disk: receiving the command status wrapper failed
|
|---|
| 684 | usb_uhci: td (0x02c72e00) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 685 | usb_uhci: td (0x02c72e60) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 686 | usb_disk: receiving the command status wrapper failed
|
|---|
| 687 | usb_uhci: td (0x02c73220) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 688 | usb_uhci: td (0x02c73280) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 689 | usb_disk: receiving the command status wrapper failed
|
|---|
| 690 | usb_uhci: td (0x02c73640) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 691 | usb_uhci: td (0x02c736a0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 692 | usb_disk: receiving the command status wrapper failed
|
|---|
| 693 | usb_uhci: td (0x02c73a60) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 694 | usb_uhci: td (0x02c73ac0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 695 | usb_disk: receiving the command status wrapper failed
|
|---|
| 696 | usb_uhci: td (0x02c73e80) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 697 | usb_uhci: td (0x02c73ee0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 698 | usb_disk: receiving the command status wrapper failed
|
|---|
| 699 | usb_uhci: td (0x02c742a0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 700 | usb_uhci: td (0x02c74300) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 701 | usb_disk: receiving the command status wrapper failed
|
|---|
| 702 | usb_uhci: td (0x02c746c0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 703 | usb_uhci: td (0x02c74720) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 704 | usb_disk: receiving the command status wrapper failed
|
|---|
| 705 | usb_uhci: td (0x02c74ae0) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 706 | usb_uhci: td (0x02c74b40) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 707 | usb_disk: receiving the command status wrapper failed
|
|---|
| 708 | usb_uhci: td (0x02c74f00) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 709 | usb_uhci: td (0x02c74f60) error: status: 0x394007ff; token: 0x01808269;
|
|---|
| 710 | usb_disk: receiving the command status wrapper failed
|
|---|
