Ticket #7127: NFE_Enabled_Bootlog.txt

options = 1
APM version 1.2 available, flags 3.
smp: using ACPI to detect MP configuration
smp: local apic address is 0xfee00000
smp: found local APIC with id 0
smp: found local APIC with id 129
smp: APIC is disabled and will not be used
smp: found io APIC with id 1 and address 0xfec00000
VESA version = 3.0, capabilities 1
OEM string: ATI ATOMBIOS
 0x100: 640 x 400 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x101: 640 x 480 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x103: 800 x 600 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x105: 1024 x 768 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x107: 1280 x 1024 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x111: 640 x 480 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x114: 800 x 600 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x117: 1024 x 768 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x11a: 1280 x 1024 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x10e: 320 x 200 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x120: 320 x 200 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x193: 320 x 240 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x195: 320 x 240 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x196: 320 x 240 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x1b3: 512 x 384 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x1b5: 512 x 384 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x1b6: 512 x 384 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x1c3: 640 x 350 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x1c5: 640 x 350 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x1c6: 640 x 350 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x183: 640 x 400 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x185: 640 x 400 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x186: 640 x 400 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x133: 720 x 400 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x135: 720 x 400 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x136: 720 x 400 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x153: 1152 x 864 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x155: 1152 x 864 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x156: 1152 x 864 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x163: 1280 x 1024 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x165: 1280 x 1024 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x166: 1280 x 1024 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x121: 640 x 480 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x122: 800 x 600 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x123: 1024 x 768 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x124: 1280 x 1024 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x143: 1400 x 1050 x 8 (a = 186, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x145: 1400 x 1050 x 16 (a = 186, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x146: 1400 x 1050 x 32 (a = 186, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x173: 1600 x 1200 x 8 (a = 186, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x175: 1600 x 1200 x 16 (a = 186, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x176: 1600 x 1200 x 32 (a = 186, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x183: 640 x 400 x 8 (a = 187, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x185: 640 x 400 x 16 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x186: 640 x 400 x 32 (a = 187, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x1d3: 1856 x 1392 x 8 (a = 186, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x1d5: 1856 x 1392 x 16 (a = 186, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x1d6: 1856 x 1392 x 32 (a = 186, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
 0x1e3: 1920 x 1440 x 8 (a = 186, mem = 4, phy = a0000000, p = 1, b = 1)
    mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
 0x1e5: 1920 x 1440 x 16 (a = 186, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
 0x1e6: 1920 x 1440 x 32 (a = 186, mem = 6, phy = a0000000, p = 1, b = 1)
    mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
Using mode 0x123
VESA compatible graphics!
EDID1: 4f
EDID2: ebx 102
EDID3: 4f
Vendor: SAM
Product ID: 402
Serial #: 1112092983
Produced in week/year: 5/2006
EDID version: 1.3
Type: Digital
Size: 34 cm x 27 cm
Gamma=2.2
White (X,Y)=(0.313,0.329)
Supported Future Video Modes:
1280x1024@60Hz (id=32897)
1280x960@60Hz (id=16513)
1152x864@75Hz (id=20337)
Supported VESA Video Modes:
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Additional Video Mode (1280x1024@60Hz):
clock=108 MHz
h: (1280, 1328, 1440, 1688)
v: (1024, 1025, 1028, 1066)
size: 33.8 cm x 27 cm
border: 0 cm x 0 cm
Horizontal frequency range = 30..81 kHz
Vertical frequency range = 56..75 Hz
Maximum pixel clock = 140 MHz
Monitor Name: SyncMaster
Serial Number: HMCL201825
crtc: h 1328/1440/1688, v 1025/1028/1066, pixel clock 108000000, refresh 6064
Welcome to the Haiku boot loader!
ATA device, master
number of drives: 1
add_partitions_for(0x001053cc, mountFS = no)
add_partitions_for(fd = 0, mountFS = no)
0x00105520 Partition::Partition
0x00105520 Partition::Scan()
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
  priority: 810
check for partitioning_system: Intel Extended Partition
0x00105684 Partition::Partition
0x00105520 Partition::AddChild 0x00105684
0x00105684 Partition::SetParent 0x00105520
new child partition!
0x0010573c Partition::Partition
0x00105520 Partition::AddChild 0x0010573c
0x0010573c Partition::SetParent 0x00105520
new child partition!
0x00105520 Partition::Scan(): scan child 0x00105684 (start = 32256, size = 540433764864, parent = 0x00105520)!
0x00105684 Partition::Scan()
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
check for partitioning_system: Intel Extended Partition
0x00105520 Partition::Scan(): scan child 0x0010573c (start = 540433797120, size = 209722540032, parent = 0x00105520)!
0x0010573c Partition::Scan()
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
check for partitioning_system: Intel Extended Partition
0x00105520 Partition::~Partition
0x00105684 Partition::SetParent 0x00000000
0x0010573c Partition::SetParent 0x00000000
boot partition offset: 540433797120
0x0010573c Partition::_Mount check for file_system: BFS Filesystem
0x00105684 Partition::Scan()
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
  priority: 500
check for partitioning_system: Intel Extended Partition
user_menu: enter
user_menu: leave
load kernel...
video mode: 1280x1024x32
smp: found 1 cpu
smp: apic_phys = 0xfee00000
smp: ioapic_phys = 0xfec00000
smp: apic = 0x817c6000
smp: ioapic = 0x817c7000
APIC ticks/sec = 201033919
kernel entry at 80052b38
Welcome to kernel debugger output!
Haiku revision: 40229
CPU 0: type 0 family 15 extended_family 0 model 15 extended_model 2 stepping 2, string 'AuthenticAMD'
CPU 0: vendor 'AMD' model name 'AMD Athlon(tm) 64 Processor 3000+'
CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh mmx fxsr sse sse2 sse3 syscall nx mmxext ffxsr long 3dnowext 3dnow 
using 32 bit paging (PAE not needed)
mark_page_range_in_use(0x0, 0x100): start page is before free list
mark_page_range_in_use(0x0, 0xa0): start page is before free list
add_memory_type_range(4, 0x0, 0xa0000, 6)
add_memory_type_range(5, 0xe0000, 0x20000, 6)
add_memory_type_range(69, 0xa0000000, 0x500000, 0)
mapping local apic at 0x817c6000
add_memory_type_range(71, 0xfee00000, 0x1000, 0)
msi support enabled
add_memory_type_range(72, 0xfec00000, 0x1000, 0)
setting up apic for CPU 0: apic id 0, version 327696
arch_init_timer: using APIC timer.
allocate_commpage_entry(2, 12) -> 0xffff0100
scheduler_init: found 1 logical cpu
scheduler_init: using simple scheduler
apm_init()
  code32: 0xf000, 0xef50, length 0xffff
  code16: 0xf000, length 0x4187
  data: 0x40, length 0x100
ioapic explicitly disabled, not using ioapics for interrupt routing
slab memory manager: created area 0x80801000 (89)
initialize_commpage_syscall(): sysenter/sysexit supported
allocate_commpage_entry(3, 5) -> 0xffff0110
heap_add_area: area -1 added to port buffer heap 0x8213f800 - usable range 0x81072000 - 0x81465000
PCI: pci_module_init
PCI: mechanism 1 controller found
PCI: dom 0, bus 0, dev  2, func 0, changed PCI bridge control from 0x0002 to 0x0003
PCI: dom 0, bus 0, dev  3, func 0, changed PCI bridge control from 0x0002 to 0x0003
PCI: dom 0, bus 0, dev  4, func 0, changed PCI bridge control from 0x000a to 0x000b
PCI: dom 0, bus 0, dev 16, func 0, changed PCI bridge control from 0x0202 to 0x0823
PCI: find_pci_capability ERROR 0:0:1 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:0:2 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:0:3 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:0:4 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:0:6 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:0:7 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:10:0 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:24:1 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:24:2 capability 0x5 not supported
PCI: find_pci_capability ERROR 0:24:3 capability 0x5 not supported
PCI: [dom 0, bus  0] bus   0, device  0, function  0: vendor 10de, device 02f4, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02f4: C51 Host Bridge
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81cd, subsystem_vendor_id 1043
PCI:   interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: ldt, ldt
PCI: [dom 0, bus  0] bus   0, device  0, function  1: vendor 10de, device 02fa, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02fa: C51 Memory Controller 0 (A8N-VM CSM Mainboard)
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81cd, subsystem_vendor_id 1043
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  2: vendor 10de, device 02fe, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02fe: C51 Memory Controller 1 (A8N-VM CSM Mainboard)
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81cd, subsystem_vendor_id 1043
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  3: vendor 10de, device 02f8, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02f8: C51 Memory Controller 5 (A8N-VM CSM Mainboard)
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81cd, subsystem_vendor_id 1043
PCI:   interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  4: vendor 10de, device 02f9, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02f9: C51 Memory Controller 4 (A8N-VM CSM Mainboard)
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81cd, subsystem_vendor_id 1043
PCI:   interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  5: vendor 10de, device 02ff, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02ff: C51 Host Bridge (A8N-VM CSM Mainboard)
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81cd, subsystem_vendor_id 1043
PCI:   interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: reserved, reserved
PCI: [dom 0, bus  0] bus   0, device  0, function  6: vendor 10de, device 027f, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 027f: C51 Memory Controller 3 (A8N-VM CSM Mainboard)
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81cd, subsystem_vendor_id 1043
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  7: vendor 10de, device 027e, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 027e: C51 Memory Controller 2 (A8N-VM CSM Mainboard)
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81cd, subsystem_vendor_id 1043
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  2, function  0: vendor 10de, device 02fc, revision a1
PCI:   class_base 06, class_function 04, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02fc: C51 PCI Express Bridge
PCI:   info: Bridge (PCI bridge, Normal decode)
PCI:   line_size 10, latency 00, header_type 01, BIST 00
PCI:   subsystem_id 0000, subsystem_vendor_id 0040
PCI:   primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 00
PCI:   io_base_upper_16  0000, io_base  f1
PCI:   io_limit_upper_16 0000, io_limit 01
PCI:   memory_base fff0, memory_limit 0000
PCI:   prefetchable_memory_base_upper32  00000000, prefetchable_memory_base  fff1
PCI:   prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit 0001
PCI:   bridge_control 0003, secondary_status 0000
PCI:   interrupt_line 00, interrupt_pin 00
PCI:   ROM base host 00000000, pci 00000000, size ??
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: subvendor, PM, MSI, ldt, PCIe
PCI: [dom 0, bus  0] bus   0, device  3, function  0: vendor 10de, device 02fd, revision a1
PCI:   class_base 06, class_function 04, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02fd: C51 PCI Express Bridge
PCI:   info: Bridge (PCI bridge, Normal decode)
PCI:   line_size 10, latency 00, header_type 01, BIST 00
PCI:   subsystem_id 0000, subsystem_vendor_id 0040
PCI:   primary_bus 00, secondary_bus 02, subordinate_bus 02, secondary_latency 00
PCI:   io_base_upper_16  0000, io_base  f1
PCI:   io_limit_upper_16 0000, io_limit 01
PCI:   memory_base fff0, memory_limit 0000
PCI:   prefetchable_memory_base_upper32  00000000, prefetchable_memory_base  fff1
PCI:   prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit 0001
PCI:   bridge_control 0003, secondary_status 0000
PCI:   interrupt_line 00, interrupt_pin 00
PCI:   ROM base host 00000000, pci 00000000, size ??
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: subvendor, PM, MSI, ldt, PCIe
PCI: [dom 0, bus  0] bus   0, device  4, function  0: vendor 10de, device 02fb, revision a1
PCI:   class_base 06, class_function 04, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 02fb: C51 PCI Express Bridge
PCI:   info: Bridge (PCI bridge, Normal decode)
PCI:   line_size 10, latency 00, header_type 01, BIST 00
PCI:   subsystem_id 0000, subsystem_vendor_id 0040
PCI:   primary_bus 00, secondary_bus 03, subordinate_bus 03, secondary_latency 00
PCI:   io_base_upper_16  0000, io_base  91
PCI:   io_limit_upper_16 0000, io_limit b1
PCI:   memory_base bfd0, memory_limit dfd0
PCI:   prefetchable_memory_base_upper32  00000000, prefetchable_memory_base  9fc1
PCI:   prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit bfb1
PCI:   bridge_control 000b, secondary_status 0000
PCI:   interrupt_line 00, interrupt_pin 00
PCI:   ROM base host 00000000, pci 00000000, size ??
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: subvendor, PM, MSI, ldt, PCIe
PCI: [dom 0, bus  3] bus   3, device  0, function  0: vendor 1002, device 9598, revision 00
PCI:   class_base 03, class_function 00, class_api 00
PCI:   vendor 1002: ATI Technologies Inc
PCI:   device 9598: Mobility Radeon HD 3600 Series
PCI:   info: Display controller (VGA compatible controller, VGA controller)
PCI:   line_size 10, latency 00, header_type 80, BIST 00
PCI:   ROM base host dfde0000, pci dfde0000, size 00020000
PCI:   cardbus_CIS 00000000, subsystem_id 01e4, subsystem_vendor_id 1043
PCI:   interrupt_line 0b, interrupt_pin 01, min_grant 00, max_latency 00
PCI:   base reg 0: host a0000000, pci a0000000, size 10000000, flags 0c
PCI:   base reg 1: host 00000000, pci 00000000, size 00000010, flags 0f
PCI:   base reg 2: host d0000000, pci d0000000, size 00010000, flags 04
PCI:   base reg 3: host 00000000, pci 00000000, size 00000010, flags 0f
PCI:   base reg 4: host 0000b000, pci 0000b000, size 00000100, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM, PCIe, MSI
PCI: [dom 0, bus  3] bus   3, device  0, function  1: vendor 1002, device aa20, revision 00
PCI:   class_base 04, class_function 03, class_api 00
PCI:   vendor 1002: ATI Technologies Inc
PCI:   device aa20: RV635 Audio device [Radeon HD 3600 Series]
PCI:   info: Multimedia controller (Audio device)
PCI:   line_size 10, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id aa20, subsystem_vendor_id 1043
PCI:   interrupt_line 05, interrupt_pin 02, min_grant 00, max_latency 00
PCI:   base reg 0: host c8000000, pci c8000000, size 00004000, flags 04
PCI:   base reg 1: host 00000000, pci 00000000, size 00000010, flags 0f
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM, PCIe, MSI
PCI: [dom 0, bus  0] bus   0, device  9, function  0: vendor 10de, device 0270, revision a2
PCI:   class_base 05, class_function 00, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 0270: MCP51 Host Bridge (A8N-VM CSM Mainboard)
PCI:   info: Memory controller (RAM memory)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81bc, subsystem_vendor_id 1043
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: ldt, ldt
PCI: [dom 0, bus  0] bus   0, device 10, function  0: vendor 10de, device 0260, revision a2
PCI:   class_base 06, class_function 01, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 0260: MCP51 LPC Bridge (A8N-VM CSM Mainboard)
PCI:   info: Bridge (ISA bridge)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81bc, subsystem_vendor_id 1043
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device 10, function  1: vendor 10de, device 0264, revision a2
PCI:   class_base 0c, class_function 05, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 0264: MCP51 SMBus (A8N-VM CSM Mainboard)
PCI:   info: Serial bus controller (SMBus)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81bc, subsystem_vendor_id 1043
PCI:   interrupt_line 05, interrupt_pin 01, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000600, pci 00000600, size 00000040, flags 01
PCI:   base reg 5: host 00000700, pci 00000700, size 00000040, flags 01
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 11, function  0: vendor 10de, device 026d, revision a2
PCI:   class_base 0c, class_function 03, class_api 10
PCI:   vendor 10de: nVidia Corporation
PCI:   device 026d: MCP51 USB Controller (A8N-VM CSM Mainboard)
PCI:   info: Serial bus controller (USB Controller, OHCI)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81bc, subsystem_vendor_id 1043
PCI:   interrupt_line 05, interrupt_pin 01, min_grant 03, max_latency 01
PCI:   base reg 0: host dffbe000, pci dffbe000, size 00001000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 11, function  1: vendor 10de, device 026e, revision a2
PCI:   class_base 0c, class_function 03, class_api 20
PCI:   vendor 10de: nVidia Corporation
PCI:   device 026e: MCP51 USB Controller (A8N-VM CSM Mainboard)
PCI:   info: Serial bus controller (USB Controller, EHCI)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81bc, subsystem_vendor_id 1043
PCI:   interrupt_line 05, interrupt_pin 02, min_grant 03, max_latency 01
PCI:   base reg 0: host dffbfc00, pci dffbfc00, size 00000100, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: DebugPort, PM
PCI: [dom 0, bus  0] bus   0, device 13, function  0: vendor 10de, device 0265, revision a1
PCI:   class_base 01, class_function 01, class_api 8a
PCI:   vendor 10de: nVidia Corporation
PCI:   device 0265: MCP51 IDE (A8N-VM CSM Mainboard)
PCI:   info: Mass storage controller (IDE interface)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81bc, subsystem_vendor_id 1043
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 03, max_latency 01
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 0000ffa0, pci 0000ffa0, size 00000010, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 14, function  0: vendor 10de, device 0266, revision a1
PCI:   class_base 01, class_function 01, class_api 85
PCI:   vendor 10de: nVidia Corporation
PCI:   device 0266: MCP51 Serial ATA Controller (A8N-VM CSM Mainboard)
PCI:   info: Mass storage controller (IDE interface)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81bc, subsystem_vendor_id 1043
PCI:   interrupt_line 0b, interrupt_pin 01, min_grant 03, max_latency 01
PCI:   base reg 0: host 0000e800, pci 0000e800, size 00000010, flags 09
PCI:   base reg 1: host 0000e480, pci 0000e480, size 00000010, flags 0d
PCI:   base reg 2: host 0000e400, pci 0000e400, size 00000010, flags 09
PCI:   base reg 3: host 0000e080, pci 0000e080, size 00000010, flags 0d
PCI:   base reg 4: host 0000e000, pci 0000e000, size 00000010, flags 01
PCI:   base reg 5: host dffbd000, pci dffbd000, size 00001000, flags 00
PCI:   Capabilities: PM, MSI, ldt
PCI: [dom 0, bus  0] bus   0, device 15, function  0: vendor 10de, device 0267, revision a1
PCI:   class_base 01, class_function 01, class_api 85
PCI:   vendor 10de: nVidia Corporation
PCI:   device 0267: MCP51 Serial ATA Controller (A8N-VM CSM Mainboard)
PCI:   info: Mass storage controller (IDE interface)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 81bc, subsystem_vendor_id 1043
PCI:   interrupt_line 0a, interrupt_pin 01, min_grant 03, max_latency 01
PCI:   base reg 0: host 0000dc00, pci 0000dc00, size 00000010, flags 09
PCI:   base reg 1: host 0000d880, pci 0000d880, size 00000010, flags 0d
PCI:   base reg 2: host 0000d800, pci 0000d800, size 00000010, flags 09
PCI:   base reg 3: host 0000d480, pci 0000d480, size 00000010, flags 0d
PCI:   base reg 4: host 0000d400, pci 0000d400, size 00000010, flags 01
PCI:   base reg 5: host dffbc000, pci dffbc000, size 00001000, flags 00
PCI:   Capabilities: PM, MSI, ldt
PCI: [dom 0, bus  0] bus   0, device 16, function  0: vendor 10de, device 026f, revision a2
PCI:   class_base 06, class_function 04, class_api 01
PCI:   vendor 10de: nVidia Corporation
PCI:   device 026f: MCP51 PCI Bridge
PCI:   info: Bridge (PCI bridge, Subtractive decode)
PCI:   line_size 00, latency 00, header_type 81, BIST 00
PCI:   subsystem_id 0000, subsystem_vendor_id 00b8
PCI:   primary_bus 00, secondary_bus 04, subordinate_bus 04, secondary_latency 40
PCI:   io_base_upper_16  0000, io_base  c0
PCI:   io_limit_upper_16 0000, io_limit c0
PCI:   memory_base dfe0, memory_limit dfe0
PCI:   prefetchable_memory_base_upper32  00000000, prefetchable_memory_base  fff0
PCI:   prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit 0000
PCI:   bridge_control 0823, secondary_status 0280
PCI:   interrupt_line 00, interrupt_pin 00
PCI:   ROM base host 00000000, pci 00000000, size ??
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: subvendor, ldt
PCI: [dom 0, bus  4] bus   4, device  5, function  0: vendor 1106, device 3044, revision 80
PCI:   class_base 0c, class_function 00, class_api 10
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3044: VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (A8V/A8N/P4P800 series motherboard)
PCI:   info: Serial bus controller (FireWire (IEEE 1394), OHCI)
PCI:   line_size 10, latency 40, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 808a, subsystem_vendor_id 1043
PCI:   interrupt_line 05, interrupt_pin 01, min_grant 00, max_latency 20
PCI:   base reg 0: host dfeff800, pci dfeff800, size 00000800, flags 00
PCI:   base reg 1: host 0000cc00, pci 0000cc00, size 00000080, flags 01
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  4] bus   4, device  9, function  0: vendor e159, device 0001, revision 00
PCI:   class_base 07, class_function 80, class_api 00
PCI:   vendor e159: Tiger Jet Network Inc.
PCI:   device 0001: Tiger3XX Modem/ISDN interface
PCI:   info: Communication controller
PCI:   line_size 00, latency 40, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0003, subsystem_vendor_id 5213
PCI:   interrupt_line 05, interrupt_pin 01, min_grant 01, max_latency 80
PCI:   base reg 0: host 0000c800, pci 0000c800, size 00000100, flags 01
PCI:   base reg 1: host dfefe000, pci dfefe000, size 00001000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 16, function  1: vendor 10de, device 026c, revision a2
PCI:   class_base 04, class_function 03, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 026c: MCP51 High Definition Audio (ASUSTeK Computer Inc. A8N-VM CSM Mainboard)
PCI:   info: Multimedia controller (Audio device)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id cb84, subsystem_vendor_id 10de
PCI:   interrupt_line 05, interrupt_pin 02, min_grant 02, max_latency 05
PCI:   base reg 0: host dffb8000, pci dffb8000, size 00004000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM, MSI, ldt
PCI: [dom 0, bus  0] bus   0, device 20, function  0: vendor 10de, device 0269, revision a1
PCI:   class_base 06, class_function 80, class_api 00
PCI:   vendor 10de: nVidia Corporation
PCI:   device 0269: MCP51 Ethernet Controller (A8N-VM CSM Mainboard)
PCI:   info: Bridge
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 8141, subsystem_vendor_id 1043
PCI:   interrupt_line 05, interrupt_pin 01, min_grant 01, max_latency 14
PCI:   base reg 0: host dffb7000, pci dffb7000, size 00001000, flags 00
PCI:   base reg 1: host 0000d080, pci 0000d080, size 00000010, flags 09
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 24, function  0: vendor 1022, device 1100, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1022: Advanced Micro Devices [AMD]
PCI:   device 1100: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: ldt
PCI: [dom 0, bus  0] bus   0, device 24, function  1: vendor 1022, device 1101, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1022: Advanced Micro Devices [AMD]
PCI:   device 1101: K8 [Athlon64/Opteron] Address Map
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device 24, function  2: vendor 1022, device 1102, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1022: Advanced Micro Devices [AMD]
PCI:   device 1102: K8 [Athlon64/Opteron] DRAM Controller
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device 24, function  3: vendor 1022, device 1103, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1022: Advanced Micro Devices [AMD]
PCI:   device 1103: K8 [Athlon64/Opteron] Miscellaneous Control
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
add_memory_type_range(93, 0x0, 0x1000, 0)
remove_memory_type_range(93, 0x0, 0x1000, 0)
add_memory_type_range(94, 0x9f000, 0x1000, 0)
remove_memory_type_range(94, 0x9f000, 0x1000, 0)
add_memory_type_range(95, 0xe0000, 0x20000, 0)
remove_memory_type_range(95, 0xe0000, 0x20000, 0)
add_memory_type_range(96, 0xfb000, 0x1000, 0)
ACPI: RSDP 0x000fb870 00024 (v02 ACPIAM)
remove_memory_type_range(96, 0xfb000, 0x1000, 0)
add_memory_type_range(97, 0x7ffc0000, 0x1000, 0)
ACPI: XSDT 0x7ffc0100 00044 (v01 A M I  OEMXSDT  11000517 MSFT 00000097)
remove_memory_type_range(97, 0x7ffc0000, 0x1000, 0)
add_memory_type_range(98, 0x7ffc0000, 0x1000, 0)
remove_memory_type_range(98, 0x7ffc0000, 0x1000, 0)
add_memory_type_range(99, 0x7ffc0000, 0x1000, 0)
ACPI: FACP 0x7ffc0290 000F4 (v03 A M I  OEMFACP  11000517 MSFT 00000097)
remove_memory_type_range(99, 0x7ffc0000, 0x1000, 0)
add_memory_type_range(100, 0x7ffc0000, 0x1000, 0)
remove_memory_type_range(100, 0x7ffc0000, 0x1000, 0)
add_memory_type_range(101, 0x7ffc0000, 0x1000, 0)
ACPI: DSDT 0x7ffc0440 0566E (v01  A0368 A0368001 00000001 INTL 02002026)
remove_memory_type_range(101, 0x7ffc0000, 0x1000, 0)
add_memory_type_range(102, 0x7ffce000, 0x1000, 0)
ACPI: FACS 0x7ffce000 00040
remove_memory_type_range(102, 0x7ffce000, 0x1000, 0)
add_memory_type_range(103, 0x7ffc0000, 0x1000, 0)
ACPI: APIC 0x7ffc0390 00070 (v01 A M I  OEMAPIC  11000517 MSFT 00000097)
remove_memory_type_range(103, 0x7ffc0000, 0x1000, 0)
add_memory_type_range(104, 0x7ffc0000, 0x1000, 0)
ACPI: MCFG 0x7ffc0400 0003C (v01 A M I  OEMMCFG  11000517 MSFT 00000097)
remove_memory_type_range(104, 0x7ffc0000, 0x1000, 0)
add_memory_type_range(105, 0x7ffce000, 0x1000, 0)
ACPI: OEMB 0x7ffce040 0005B (v01 A M I  AMI_OEM  11000517 MSFT 00000097)
remove_memory_type_range(105, 0x7ffce000, 0x1000, 0)
add_memory_type_range(106, 0x7ffc0000, 0x6000, 0)
add_memory_type_range(107, 0x7ffce000, 0x1000, 0)
add_memory_type_range(108, 0x7ffce000, 0x1000, 0)
ACPI: Executed 1 blocks of module-level executable AML code
publish device: node 0x82027d20, path acpi/namespace, module bus_managers/acpi/namespace/device_v1
ahci: ahci_supports_device
usb uhci: no devices found
usb ohci -1: iospace offset: 0xdffbe000
add_memory_type_range(124, 0xdffbe000, 0x1000, 0)
usb ohci -1: smm is in control of the host controller
usb ohci -1: ownership change successful
usb ohci -1: successfully started the controller
add_memory_type_range(127, 0xdffbf000, 0x1000, 0)
usb ehci -1: successfully started the controller
usb hub 2: port 1: device removed
usb hub 2: port 2: device removed
usb hub 7: port 1: new device connected
usb ehci -1: fullspeed device connected, giving up port ownership
usb hub 7: port 2: new device connected
usb ehci -1: fullspeed device connected, giving up port ownership
get_boot_partitions(): boot volume message:
KMessage: buffer: 0x81798980 (size/capacity: 316/316), flags: 0xa
  field: "booted from image" (BOOL): false
  field: "partition offset"  (LLNG): 540433797120 (0x7dd45d5000)
  field: "boot method"       (LONG): 0 (0x0)
  field: "boot drive number" (LLNG): 128 (0x80)
  field: "disk identifier"   (RAWT): data at 0x81798a6c, 80 bytes
get_boot_partitions(): boot method type: 0
partitioning system: partitioning_systems/intel/extended/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1)
intel: ep_std_ops(0x1)
intel: ep_std_ops(0x2)
KDiskDeviceManager::_AddDiskSystem() done: No error
partitioning system: partitioning_systems/intel/map/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1)
intel: pm_std_ops(0x1)
intel: pm_std_ops(0x2)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/bfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/devfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/rootfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
number of disk systems: 5
KDiskDeviceManager::_Scan(/dev/disk)
Legacy SATA: controller found! vendor 0x10de, device 0x0267
Legacy SATA: controller_probe
PCI-ATA: Controller in native mode: cmd 0xdc00, ctrl 0xd882, irq 10
PCI-ATA: init channel...
PCI-ATA: channel index 0
PCI-ATA: bus master base 0xd400
PCI-ATA: init channel done
ata 0: _DevicePresent: device selection failed for device 0
ata 0: _DevicePresent: device 1, presence 0
ata 0: deviceMask 0
ata 0: ignoring device 0
ata 0: ignoring device 1
ata 0 error: target device not present
ata 0 error: target device not present
ata 0 error: invalid target device
Last message repeated 12 times.
Primary Channel: No error
PCI-ATA: Controller in native mode: cmd 0xd800, ctrl 0xd482, irq 10
PCI-ATA: init channel...
PCI-ATA: channel index 1
PCI-ATA: bus master base 0xd408
PCI-ATA: init channel done
ata 1: _DevicePresent: device selection failed for device 0
ata 1: _DevicePresent: device 1, presence 0
ata 1: deviceMask 0
ata 1: ignoring device 0
ata 1: ignoring device 1
ata 1 error: target device not present
ata 1 error: target device not present
ata 1 error: invalid target device
Last message repeated 12 times.
Secondary Channel: No error
Legacy SATA: controller_probe success
Legacy SATA: controller found! vendor 0x10de, device 0x0266
Legacy SATA: controller_probe
PCI-ATA: Controller in native mode: cmd 0xe800, ctrl 0xe482, irq 11
PCI-ATA: init channel...
PCI-ATA: channel index 0
PCI-ATA: bus master base 0xe000
PCI-ATA: init channel done
ata 2: _DevicePresent: device 0, presence 1
ata 2: _DevicePresent: device 1, presence 1
ata 2: deviceMask 3
ata 2: probing device 0
ata 2: signature of device 0: 0x0000
ata 2-0: model number: WDC WD7500AAKS-65RBA0                   
ata 2-0: serial number:      WD-WCAPT1036640
ata 2-0: firmware rev.: 30.04G30
ata 2-0: using DMA mode 0x16
ata 2: identified ATA device 0
ata 2: probing device 1
ata 2 error: device 1 failed, error code is 0x00
ata 2: signature of device 1: 0x0000
ata 2 error: device ready not set
ata 2-1 error: sending identify request failed
ata 2 error: command failed, error bit is set. status 0x51, error 0x04
publish device: node 0x82305470, path disk/ata/2/master/raw, module drivers/disk/scsi/scsi_disk/device_v1
ata 2 error: target device not present
ata 2 error: invalid target device
Last message repeated 12 times.
Primary Channel: No error
PCI-ATA: Controller in native mode: cmd 0xe400, ctrl 0xe082, irq 11
PCI-ATA: init channel...
PCI-ATA: channel index 1
PCI-ATA: bus master base 0xe008
PCI-ATA: init channel done
ata 3: _DevicePresent: device 0, presence 1
ata 3: _DevicePresent: device 1, presence 1
usb hub 2: port 1: new device connected
ata 3: deviceMask 3
ata 3: probing device 0
ata 3: signature of device 0: 0xeb14
atapi 3-0: model number: TSSTcorp CDDVDW SH-S203D                
atapi 3-0: serial number:                     
atapi 3-0: firmware rev.: SB00    
atapi 3-0: using DMA mode 0x15
ata 3: identified ATAPI device 0
ata 3: probing device 1
ata 3 error: device 1 failed, error code is 0x00
ata 3: signature of device 1: 0x0200
ata 3 error: device ready not set
ata 3-1 error: sending identify request failed
publish device: node 0x823052e0, path disk/atapi/3/master/raw, module drivers/disk/scsi/scsi_cd/device_v1
ata 3 error: target device not present
ata 3 error: invalid target device
Last message repeated 12 times.
Secondary Channel: No error
Legacy SATA: controller_probe success
PCI-ATA: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
PCI-ATA: init channel...
PCI-ATA: channel index 0
PCI-ATA: bus master base 0xffa0
PCI-ATA: init channel done
ata 4: _DevicePresent: device 0, presence 0
ata 4: _DevicePresent: device 1, presence 0
ata 4: deviceMask 0
ata 4: ignoring device 0
ata 4: ignoring device 1
ata 4 error: target device not present
ata 4 error: target device not present
ata 4 error: invalid target device
Last message repeated 12 times.
PCI-ATA: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
PCI-ATA: init channel...
PCI-ATA: channel index 1
PCI-ATA: bus master base 0xffa8
PCI-ATA: init channel done
ata 5: _DevicePresent: device 0, presence 0
ata 5: _DevicePresent: device 1, presence 0
ata 5: deviceMask 0
ata 5: ignoring device 0
ata 5: ignoring device 1
ata 5 error: target device not present
ata 5 error: target device not present
ata 5 error: invalid target device
Last message repeated 12 times.
ahci: ahci_supports_device
ahci: ahci_supports_device
KDiskDeviceManager::_Scan(/dev/disk/ata)
KDiskDeviceManager::_Scan(/dev/disk/ata/2)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master/raw)
  found device: /dev/disk/ata/2/master/raw
DMAResource@0x82318e00: low/high 0/100000000, max segment count 512, align 2, boundary 65536, max transfer 33553920, max segment size 33554432
slab memory manager: created area 0x85001000 (156)
KDiskDeviceManager::_Scan(/dev/disk/atapi)
KDiskDeviceManager::_Scan(/dev/disk/atapi/3)
KDiskDeviceManager::_Scan(/dev/disk/atapi/3/master)
KDiskDeviceManager::_Scan(/dev/disk/atapi/3/master/raw)
  found device: /dev/disk/atapi/3/master/raw
KDiskDeviceManager::_ScanPartition(/dev/disk/ata/2/master/raw)
intel: ep_std_ops(0x1)
  trying: partitioning_systems/intel/extended/v1
  returned: -1
intel: ep_std_ops(0x2)
intel: pm_std_ops(0x1)
  trying: partitioning_systems/intel/map/v1
intel: pm_identify_partition(0, 0: 0, 750156374016, 512)
  returned: 0.81
  trying: file_systems/bfs/v1
  returned: -1
  trying: file_systems/devfs/v1
  returned: -1
  trying: file_systems/rootfs/v1
  returned: -1
  scanning with: partitioning_systems/intel/map/v1
intel: pm_scan_partition(0, 0: 0, 750156374016, 512)
KDiskDeviceManager::_ScanPartition(/dev/disk/ata/2/master/0)
intel: ep_std_ops(0x1)
  trying: partitioning_systems/intel/extended/v1
intel: ep_identify_partition(0, 32256, 540433764864, 512)
  returned: -1
intel: ep_std_ops(0x2)
  trying: partitioning_systems/intel/map/v1
intel: pm_identify_partition(0, 2: 32256, 540433764864, 512)
  returned: -1
  trying: file_systems/bfs/v1
  returned: -1
  trying: file_systems/devfs/v1
  returned: -1
  trying: file_systems/rootfs/v1
  returned: -1
KDiskDeviceManager::_ScanPartition(/dev/disk/ata/2/master/1)
intel: ep_std_ops(0x1)
  trying: partitioning_systems/intel/extended/v1
intel: ep_identify_partition(0, 540433797120, 209722540032, 512)
  returned: -1
intel: ep_std_ops(0x2)
  trying: partitioning_systems/intel/map/v1
intel: pm_identify_partition(0, 3: 540433797120, 209722540032, 512)
  returned: -1
  trying: file_systems/bfs/v1
  returned: 0.8
  trying: file_systems/devfs/v1
  returned: -1
  trying: file_systems/rootfs/v1
  returned: -1
  scanning with: file_systems/bfs/v1
device 0: /dev/disk/ata/2/master/raw
  media status:      No error
  device flags:      2
  offset:            0
  size:              750156374016 (715404.867 MB)
  content size:      750156374016
  block size:        512
  child count:       2
  index:             -1
  status:            0
  flags:             5
  volume:            -1
  disk system:       partitioning_systems/intel/map/v1
  name:              <NULL>
  content name:      <NULL>
  type:              <NULL>
  content type:      Intel Partition Map
  params:            <NULL>
  content params:    <NULL>
  partition 2: /dev/disk/ata/2/master/0
    offset:            32256
    size:              540433764864 (515397.801 MB)
    content size:      0
    block size:        512
    child count:       0
    index:             0
    status:            2
    flags:             0
    volume:            -1
    disk system:       <NULL>
    name:              <NULL>
    content name:      <NULL>
    type:              Windows NT, OS/2
    content type:      <NULL>
    params:            type = 7 ; active = 1
    content params:    <NULL>
  partition 3: /dev/disk/ata/2/master/1
    offset:            540433797120
    size:              209722540032 (200007 MB)
    content size:      209722540032
    block size:        2048
    child count:       0
    index:             1
    status:            0
    flags:             2
    volume:            -1
    disk system:       file_systems/bfs/v1
    name:              <NULL>
    content name:      Desk
    type:              Be File System
    content type:      Be File System
    params:            type = 235 ; active = 0
    content params:    <NULL>
device 1: /dev/disk/atapi/3/master/raw
  media status:      No media present
  device flags:      5
Identified boot partition by partition offset.
slab memory manager: created area 0x85801000 (192)
bfs: mounted "Desk" (root node at 524288, device = /dev/disk/ata/2/master/1)
Mounted boot partition: /dev/disk/ata/2/master/1
module: Search for file_cache/launch_speedup/v1 failed.
partitioning system: partitioning_systems/amiga_rdb/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/amiga_rdb/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
partitioning system: partitioning_systems/apple/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/apple/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
partitioning system: partitioning_systems/efi_gpt/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/efi_gpt/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
partitioning system: partitioning_systems/session/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/attribute_overlay/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/attribute_overlay/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/cdda/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/cdda/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/ext2/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/ext2/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/fat/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/googlefs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/googlefs/v1)
googlefs: std_ops(INIT)
googlefs: std_ops(UNINIT)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/iso9660/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/nfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/nfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
usb hub 2: port 2: new device connected
file system: file_systems/ntfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/ntfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/reiserfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/reiserfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/udf/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/udf/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/write_overlay/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/write_overlay/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
KDiskDeviceManager::_ScanPartition(/dev/disk/ata/2/master/0)
  trying: partitioning_systems/amiga_rdb/v1
con_init: trying module console/frame_buffer/v1
loaded driver /boot/system/add-ons/kernel/drivers/dev/console
loaded driver /boot/system/add-ons/kernel/drivers/dev/dprintf
loaded driver /boot/system/add-ons/kernel/drivers/dev/null
loaded driver /boot/system/add-ons/kernel/drivers/dev/random
loaded driver /boot/system/add-ons/kernel/drivers/dev/tty
loaded driver /boot/system/add-ons/kernel/drivers/dev/zero
ahci: ahci_supports_device
ahci: ahci_supports_device
  returned: -1
  trying: partitioning_systems/apple/v1
  returned: -1
  trying: partitioning_systems/efi_gpt/v1
  returned: -1
  trying: partitioning_systems/session/v1
  returned: -1
  trying: file_systems/attribute_overlay/v1
  returned: -1
  trying: file_systems/cdda/v1
raw_command: 
  returned: -1
  trying: file_systems/ext2/v1
[34mext2:[0m invalid super block!
  returned: -1
  trying: file_systems/fat/v1
  returned: -1
googlefs: std_ops(INIT)
  trying: file_systems/googlefs/v1
  returned: -1
googlefs: std_ops(UNINIT)
  trying: file_systems/iso9660/v1
identify(1, 0x80f95980)
  returned: -1
  trying: file_systems/nfs/v1
  returned: -1
  trying: file_systems/ntfs/v1
  returned: 0.8
  trying: file_systems/reiserfs/v1
  returned: -1
  trying: file_systems/udf/v1
udf_recognize: Invalid sequence. status = -1
  returned: -1
  trying: file_systems/write_overlay/v1
  returned: -1
  scanning with: file_systems/ntfs/v1
KDiskDeviceManager::_Scan(/dev/disk)
KDiskDeviceManager::_Scan(/dev/disk/ata)
KDiskDeviceManager::_Scan(/dev/disk/ata/2)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master/0)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master/1)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master/raw)
KDiskDeviceManager::_Scan(/dev/disk/atapi)
KDiskDeviceManager::_Scan(/dev/disk/atapi/3)
KDiskDeviceManager::_Scan(/dev/disk/atapi/3/master)
KDiskDeviceManager::_Scan(/dev/disk/atapi/3/master/raw)
KDiskDeviceManager::_Scan(/dev/disk/floppy)
config_manager: driver module: init
driver_get_next_device_info(bus = 0, cookie = 0)
loaded driver /boot/system/add-ons/kernel/drivers/dev/disk/floppy/pc_floppy
KDiskDeviceManager::_Scan(/dev/disk/usb)
loaded driver /boot/system/add-ons/kernel/drivers/dev/disk/usb/usb_disk
usb hub 13: port 2: new device connected
usb hub 13: port 3: new device connected
usb hub 7: port 1: device removed
usb hub 7: port 2: device removed
[35musb_floppy[0m: no valid CBI interface found
Last message repeated 5 times.
loaded driver /boot/system/add-ons/kernel/drivers/dev/disk/usb/usb_floppy
devfs: reload driver "usb_disk" (-1, -1)
KDiskDeviceManager::_Scan(/dev/disk/virtual)
[35musb_floppy[0m: no valid CBI interface found
Last message repeated 5 times.
nbd:>init_hardware()
nbd:>init_driver()
KDiskDeviceManager::_ScanPartition(/dev/disk/ata/2/master/0)
intel: ep_std_ops(0x1)
  trying: partitioning_systems/intel/extended/v1
intel: ep_identify_partition(1, 32256, 540433764864, 512)
  returned: -1
intel: ep_std_ops(0x2)
  trying: partitioning_systems/intel/map/v1
intel: pm_identify_partition(1, 2: 32256, 540433764864, 512)
  returned: -1
  trying: file_systems/bfs/v1
  returned: -1
  trying: file_systems/devfs/v1
  returned: -1
  trying: file_systems/rootfs/v1
  returned: -1
  trying: partitioning_systems/amiga_rdb/v1
  returned: -1
  trying: partitioning_systems/apple/v1
  returned: -1
  trying: partitioning_systems/efi_gpt/v1
  returned: -1
  trying: partitioning_systems/session/v1
  returned: -1
  trying: file_systems/attribute_overlay/v1
  returned: -1
  trying: file_systems/cdda/v1
raw_command: 
  returned: -1
  trying: file_systems/ext2/v1
[34mext2:[0m invalid super block!
  returned: -1
  trying: file_systems/fat/v1
  returned: -1
googlefs: std_ops(INIT)
  trying: file_systems/googlefs/v1
  returned: -1
googlefs: std_ops(UNINIT)
  trying: file_systems/iso9660/v1
identify(1, 0x80f957b0)
  returned: -1
  trying: file_systems/nfs/v1
  returned: -1
  trying: file_systems/ntfs/v1
  returned: 0.8
  trying: file_systems/reiserfs/v1
  returned: -1
  trying: file_systems/udf/v1
udf_recognize: Invalid sequence. status = -1
  returned: -1
  trying: file_systems/write_overlay/v1
  returned: -1
allocate_commpage_entry(4, 34) -> 0xffff0118
allocate_commpage_entry(5, 74) -> 0xffff0140
add_memory_type_range(-1, 0x100000, 0x7fec0000, 6)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0x80000000, size: 0x80000000, type: 0
kernel debugger extension "debugger/disasm/v1": loaded
kernel debugger extension "debugger/invalidate_on_exit/v1": loaded
kernel debugger extension "debugger/run_on_exit/v1": loaded
kernel debugger extension "debugger/usb_keyboard/v1": loaded
add_memory_type_range(69, 0xa0000000, 0x500000, 1)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
ahci: ahci_supports_device
est: cpu_type: 4607 vendor 4352 model 255
est: cpu_type: 4607 vendor 4352 model 255
REG: Failed to open shadow passwd DB file "/etc/shadow": No such file or directory
bfs: bfs_open_dir:1616: Not a directory
register_domain(1, internet)
unregister_domain(0x82014780, 1, internet)
register_domain(9, unix)
unregister_domain(0x82014780, 9, unix)
register_domain(1, internet)
unregister_domain(0x80fe4d80, 1, internet)
register_domain(1, internet)
unregister_domain(0x80fe4bc0, 1, internet)
register_domain(9, unix)
unregister_domain(0x80fe4bc0, 9, unix)
register_domain(1, internet)
unregister_domain(0x80fe4a40, 1, internet)
register_domain(1, internet)
unregister_domain(0x80fe4e00, 1, internet)
register_domain(9, unix)
unregister_domain(0x80fe4a00, 9, unix)
register_domain(1, internet)
unregister_domain(0x80fe48c0, 1, internet)
register_domain(1, internet)
unregister_domain(0x80fe4880, 1, internet)
register_domain(9, unix)
unregister_domain(0x80fe4840, 9, unix)
register_domain(1, internet)
unregister_domain(0x80fe4700, 1, internet)
register_domain(1, internet)
unregister_domain(0x80fe46c0, 1, internet)
register_domain(9, unix)
unregister_domain(0x80fe4680, 9, unix)
register_domain(1, internet)
3dfx: init_hardware() - no supported devices
register_domain(4, link)
ati: init_hardware() - no supported devices
intel_extreme: init_hardware()
Radeon - init_hardware: Version: 5.1.6.0
Radeon - Radeon_CardDetect: no supported devices found
S3: init_hardware() - no supported devices
vesa: init_hardware()
vesa: init_driver()
vesa: publish_devices()
vesa: find_device()
loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/vesa
add_memory_type_range(1646, 0xa0000000, 0x10000000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xa0000000, size: 0x20000000, type: 0
  mtrr:  2: base: 0xc0000000, size: 0x40000000, type: 0
remove_memory_type_range(69, 0xa0000000, 0x500000, 1)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0x80000000, size: 0x80000000, type: 0
add_memory_type_range(1646, 0xa0000000, 0x10000000, 1)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
add_memory_type_range(1648, 0x0, 0x1000, 0)
set MTRRs to:
  mtrr:  0: base:        0x0, size:     0x1000, type: 0
  mtrr:  1: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  2: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  3: base: 0x80000000, size: 0x80000000, type: 1
remove_memory_type_range(1648, 0x0, 0x1000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
add_memory_type_range(1649, 0xa0000, 0x60000, 0)
set MTRRs to:
  mtrr:  0: base:    0xa0000, size:    0x20000, type: 0
  mtrr:  1: base:    0xc0000, size:    0x40000, type: 0
  mtrr:  2: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  3: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  4: base: 0x80000000, size: 0x80000000, type: 1
remove_memory_type_range(1649, 0xa0000, 0x60000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
vesa: vesa_init() completed successfully!
vesa: acc: vesa.accelerant
etherpci: init_driver init_driver: etherpci not found
nforce: init_driver(0x81059380)
[nforce] (nfe) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1,0x2)
add_memory_type_range(1775, 0xdffb7000, 0x20000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
[nforce] (nfe) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1,0x6)
if_initname(0x822df300, nfe, 3)
[nforce] nforce: /dev/net/nforce/0
[nforce] () Found MII: ukphy
[nforce] () OUI 0x005043, model 0x000c, rev. 2
[nforce] ()  Adding entry for Ethernet none
Adding entry for Ethernet 10baseT/UTP
10baseTAdding entry for Ethernet 10baseT/UTP <full-duplex>
, 10baseT-FDXAdding entry for Ethernet 100baseTX
, 100baseTXAdding entry for Ethernet 100baseTX <full-duplex>
, 100baseTX-FDXAdding entry for Ethernet 1000baseT
, 1000baseTAdding entry for Ethernet 1000baseT <full-duplex>
, 1000baseT-FDXAdding entry for Ethernet autoselect
, auto
ifmedia_set: target Ethernet autoselect
ifmedia_set: setting to Ethernet autoselect
loaded driver /boot/system/add-ons/kernel/drivers/dev/net/nforce
loaded driver /boot/system/add-ons/kernel/drivers/dev/net/pegasus
[33musb_asix:[0m00.37.858:init_driver::ver.0.8.3
loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_asix
loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_ecm
bfs: bfs_open_dir:1616: Not a directory
[net/nforce/0] compat_open(0x2)
ifmedia_ioctl: switching nfe to Ethernet autoselect
/dev/net/nforce/0: media change, media 0x22 quality 1000 speed 10000000
module: Search for network/protocols/ipv6/v1 failed.
add_memory_type_range(1875, 0x0, 0x1000, 0)
set MTRRs to:
  mtrr:  0: base:        0x0, size:     0x1000, type: 0
  mtrr:  1: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  2: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  3: base: 0x80000000, size: 0x80000000, type: 1
remove_memory_type_range(1875, 0x0, 0x1000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
add_memory_type_range(1876, 0xa0000, 0x60000, 0)
set MTRRs to:
  mtrr:  0: base:    0xa0000, size:    0x20000, type: 0
  mtrr:  1: base:    0xc0000, size:    0x40000, type: 0
  mtrr:  2: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  3: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  4: base: 0x80000000, size: 0x80000000, type: 1
remove_memory_type_range(1876, 0xa0000, 0x60000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
ps2_hid: init_hardware
ps2_hid: init_driver
ps2_hid: publish_devices
ps2_hid: uninit_driver
loaded driver /boot/system/add-ons/kernel/drivers/dev/input/ps2_hid
/dev/net/nforce/0: media change, media 0x900026 quality 1000 speed 10000000
loaded driver /boot/system/add-ons/kernel/drivers/dev/input/usb_hid
loaded driver /boot/system/add-ons/kernel/drivers/dev/input/wacom
bfs: bfs_open_dir:1616: Not a directory
ps2: reset failed
ps2: devfs_publish_device input/mouse/ps2/0, status = 0xffffffff
ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000
ps2: keyboard found
error when KB_SET_KEY_REPEAT_DELAY, fd:-1
ps2: keyboard found
emuxki: init_hardware()
loaded driver /boot/system/add-ons/kernel/drivers/dev/midi/usb_midi
SAT: SATWindow::_InitGroup Notification
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18050e28 window Notification
SAT: SATWindow::_InitGroup Notification
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18050bd8 window Notification
SAT: SATWindow::_InitGroup Mail Status
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18050860 window Mail Status
SAT: SATWindow::_InitGroup Mail Status
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18050610 window Mail Status
SAT: SATWindow::_InitGroup Tracker status
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18ac2650 window Tracker status
SAT: SATWindow::_InitGroup Tracker status
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18ac2400 window Tracker status
SAT: SATWindow::_InitGroup Twitcher
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18ac2088 window Twitcher
SAT: SATWindow::_InitGroup Twitcher
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18ac1e38 window Twitcher
bfs: bfs_create_index:2077: File or Directory already exists
Last message repeated 14 times.
SAT: SATWindow::_InitGroup Deskbar
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18ac1998 window Deskbar
SAT: SATWindow::_InitGroup Deskbar
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18ac1748 window Deskbar
bfs: bfs_create_index:2077: File or Directory already exists
cx23882: init_hardware()
bfs: bfs_create_index:2077: File or Directory already exists
bfs: bfs_create_index:2077: File or Directory already exists
ahci: ahci_supports_device
ahci: ahci_supports_device
firewire: fw_module_init
VIA Fire II (VT6306)
vendor=1106, device=3044, revision = 80
firewire: found 1 cards
firewire: latency timer 40 -> 40.
firewire: cache size 10 -> 10.
firewire: IRQ 5
firewire: hardware register address dfeff800
firewire: mapping physical address 0xdfeff800 with 2048 bytes for fw ohci register
add_memory_type_range(2858, 0xdfeff000, 0x1000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
firewire: physical = 0xdfeff800, virtual = 0x81537800, offset = 2048, phyadr = 0xdfeff000, mapadr = 0x81537000, size = 4096, area = 0x00000b2a
firewire: mapped registers to 0x81537800
SAT: SATWindow::_InitGroup TrackerWindow
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18c9df10 window TrackerWindow
SAT: SATWindow::_InitGroup TrackerWindow
SAT: SATGroup::AddWindow
SAT: SATWindow::AddedToGroup group: 0x18c9dcc0 window TrackerWindow
firewire:OHCI version 1.0 (ROM=1)
firewire:No. of Isochronous channels is 4.
firewire: allocating 3076 bytes for fwohci config etc. buf
firewire: area = 2863, size = 4096, virt = 0x8101a000, phy = 9abd000
firewire: allocating 4096 bytes for fw multi dma buf
firewire: area = 2864, size = 4096, virt = 0x81583000, phy = 9acf000
firewire: allocating 4096 bytes for fw multi dma buf
firewire: area = 2865, size = 4096, virt = 0x8103e000, phy = 9ace000
firewire: allocating 16384 bytes for fw multi dma buf
firewire: area = 2866, size = 16384, virt = 0x81ec4000, phy = 9ac0000
firewire: allocating 4096 bytes for fw multi dma buf
firewire: area = 2867, size = 4096, virt = 0x8103f000, phy = 9acd000
firewire:EUI64 00:11:d8:00:00:7c:d9:cf
firewire:resetting OHCI...done (loop=0)
firewire:Phy 1394a available S400, 2 ports.
firewire:Enable 1394a Enhancements
firewire:Link S400, max_rec 2048 bytes.
firewire:BUS_OPT 0xf800a202 -> 0xf800a202
firewire: allocating 524288 bytes for fw rx Area
firewire: area = 2869, size = 524288, virt = 0x81ecc000, phy = 9b18000
firewire: allocating 262144 bytes for fw rx Area
firewire: area = 2870, size = 262144, virt = 0x81f4c000, phy = 9b99000
firewire:fwohci_set_intr: 1
firewire:Initiate bus reset
firewire:fwohci_intr_core: BUS reset
firewire:fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
loaded driver /boot/system/add-ons/kernel/drivers/dev/bus/fw_raw
node:0 link:1 gap:5 spd:2 con:1 pwr:1 p0:1 p1:1 p2:0 i:1 m:0
firewire:1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire:fwohci_set_bus_manager: 0->0 (loop=0)
firewire:bus manager 0 
firewire:fw_phy_config: root_node=-1 gap_count=5
fwohci_start: maxdesc 2
firewire:start AT DMA status=0
loaded driver /boot/system/add-ons/kernel/drivers/dev/bus/usb_raw
auich: init_hardware()
auvia: init_hardware()
echo3g: init_hardware()
echo3g: no card found
loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/emuxki
HDA: Detected controller @ PCI:3:0:1, IRQ:5, type 1002/aa20 (1043/aa20)
HDA: Detected controller @ PCI:0:16:1, IRQ:5, type 10de/026c (10de/cb84)
IRA: publish_devices
IRA: find_device
IRA: find_device
loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/hda
bfs: bfs_open_dir:1616: Not a directory
add_memory_type_range(2922, 0xc8000000, 0x4000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
hda: HDA v1.0, O:1/I:0/B:0, #SDO:1, 64bit:yes
Codec 0 Vendor: 1002 Product: aa01, Revision: 1.0.0.0
hda: Audio Group: Output delay: 0 samples, Input delay: 0 samples, Beep Generator: no
hda:   #GPIO: 0, #GPO: 0, #GPI: 0, unsol: no, wake: no
    Supported formats: 16bits 
    Supported rates: 48khz 
hda:   widget start 2, count 2
2: Audio output
    Supported formats: 16bits 
    Supported rates: 48khz 
    Supported power states: 
    [Digital] [Stereo] 
3: Pin complex
firewire:fw_bus_probe:iterate and invalidate all nodes
firewire:fw_explore: found myself node(0) fc->nodeid(0) fc->max_node(0)
bus_explore done
    [Output]
    Jack, HDMI Digital other out, Other digital, N/A, Association:1
    Supported power states: 
    [Digital] [Conn. list] [Unsol. responses] [Stereo] 
    Inputs: <2> 
build output tree: use mixer
try without mixer!
build output tree: don't use mixer
hda: Failed to setup new audio function group (No such device)!
hda: no active codec
remove_memory_type_range(2922, 0xc8000000, 0x4000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
hda: ERROR: No such device(-2147454969)
add_memory_type_range(2929, 0xdffb8000, 0x4000, 0)
set MTRRs to:
  mtrr:  0: base: 0x7ffc0000, size:    0x40000, type: 0
  mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
  mtrr:  2: base: 0x80000000, size: 0x80000000, type: 1
hda: HDA v1.0, O:4/I:4/B:0, #SDO:1, 64bit:yes
Codec 0 Vendor: 11d4 Product: 1986, Revision: 1.0.5.0
hda: Audio Group: Output delay: 12 samples, Input delay: 12 samples, Beep Generator: yes
hda:   #GPIO: 0, #GPO: 1, #GPI: 0, unsol: no, wake: no
    Supported formats: 16bits 20bits 24bits 
    Supported rates: 8khz 11khz 16khz 22khz 32khz 44khz 48khz 
hda:   widget start 2, count 42
2: Audio output
    Supported formats: 16bits bitstream 
    Supported rates: 44khz 48khz 
    Supported power states: 
    [Digital] [Conn. list] [Format override] [Stereo] 
    Inputs: 1 6 
3: Audio output
    Supported formats: 16bits 20bits 24bits 
    Supported rates: 8khz 11khz 16khz 22khz 32khz 44khz 48khz 
    Supported power states: D0 D3 
    [Power] [Proc widget] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
4: Audio output
    Supported formats: 16bits 20bits 24bits 
slab memory manager: created area 0x96001000 (2933)
    Supported rates: 8khz 11khz 16khz 22khz 32khz 44khz 48khz 
    Supported power states: D0 D3 
    [Power] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
5: Audio output
    Supported formats: 16bits 20bits 24bits 
    Supported rates: 8khz 11khz 16khz 22khz 32khz 44khz 48khz 
    Supported power states: D0 D3 
    [Power] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
6: Audio input
    Supported formats: 16bits 20bits 
    Supported rates: 8khz 11khz 16khz 22khz 32khz 44khz 48khz 
    Supported power states: D0 D3 
    [Power] [Conn. list] [Format override] [Stereo] 
    Inputs: <18> 
7: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 3 9 19 20 21 22 23 24 
8: Audio mixer
    Supported power states: 
    [Conn. list] 
    Inputs: <7> 
9: Audio mixer
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [In amplifier] 
    In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
    Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
    Inputs: 4 5 
10: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 7 4 5 
11: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 7 4 
12: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 4 7 
13: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 5 8 
14: Audio selector
    Supported power states: 
    [Conn. list] 
    Inputs: 8 17 
15: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
    Inputs: 31 32 29 29 39 40 41 42 
16: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 32 28 31 
17: Audio selector
    Supported power states: 
    [L-R swap] [Conn. list] [Proc widget] [Stereo] 
    Inputs: 15 43 
18: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 15, offset to 0 dB: 0
    Inputs: 17 34 0 33 16 7 8 35 
19: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <17> 
20: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <35> 
21: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <34> 
22: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <33> 
23: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <16> 
24: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] 
    Out Amp: supports mute, step size: 3 dB, # steps: 15, offset to 0 dB: 15
    Inputs: 25 36 
25: Beep generator
    Supported power states: 
26: Pin complex
    [Output]
    Jack, Front HP out, 1/8", Green, Association:2
    Supported power states: 
    [Conn. list] [Unsol. responses] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <10> 
27: Pin complex
    [Output]
    Jack, Line out, 1/8", Green, Association:1
    Supported power states: 
    [Conn. list] [Unsol. responses] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <11> 
28: Pin complex
    [Input] [Output]
    Jack, Line out, 1/8", Blue, Association:1
    Supported power states: 
    [Conn. list] [Unsol. responses] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <12> 
29: Pin complex
    [Input] [Output]
    Jack, Line out, 1/8", Pink, Association:1
    Supported power states: 
    [L-R swap] [Conn. list] [Unsol. responses] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <13> 
30: Pin complex
    [Output]
    None, Speaker, Other analog, N/A, Association:15
    Supported power states: 
    [Conn. list] [Out amplifier] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <14> 
31: Pin complex
    [Input] 
    Jack, Front Mic in, 1/8", Pink, Association:15
    Supported power states: 
    [Unsol. responses] [Stereo] 
32: Pin complex
    [Input] 
    Jack, Line in, 1/8", Blue, Association:15
    Supported power states: 
    [Unsol. responses] [Stereo] 
33: Pin complex
    [Input] 
    None, AUX, Other analog, N/A, Association:15
    Supported power states: 
    [Unsol. responses] [Stereo] 
34: Pin complex
    [Input] 
    Fixed, CD, ATAPI internal, Black, Association:15
    Supported power states: 
    [Stereo] 
35: Pin complex
    [Input] 
    None, Telephony, Other analog, N/A, Association:15
    Supported power states: 
36: Pin complex
    [Input] 
    None, Other, Other analog, N/A, Association:15
    Supported power states: 
37: Pin complex
    [Output]
    Jack, SPDIF out, Optical, Other, Association:15
    Supported power states: 
    [Digital] [Conn. list] [Stereo] 
    Inputs: <2> 
38: Power
    Supported power states: D0 D3 
    [Power] [Conn. list] 
    Inputs: 7 8 19 20 21 22 23 24 
39: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 31 29 
40: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 31 32 
41: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 29 32 
42: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 31 29 32 
43: Audio mixer
    Supported power states: 
    [Conn. list] 
    Inputs: <15> 
build output tree: use mixer
  look at pin widget 26 (1 inputs)
    try widget 10: 0x822fb960
    widget 10 is candidate
          output: added output widget 3
        output: added mixer/selector widget 7
            output: added output widget 4
          output: added mixer/selector widget 9
            output: added output widget 5
          output: added mixer/selector widget 9
        output: added mixer/selector widget 7
                output: not added mixer/selector widget 39
                output: not added mixer/selector widget 40
                output: not added mixer/selector widget 41
                output: not added mixer/selector widget 42
              output: not added mixer/selector widget 15
                  output: not added mixer/selector widget 39
                  output: not added mixer/selector widget 40
                  output: not added mixer/selector widget 41
                  output: not added mixer/selector widget 42
                output: not added mixer/selector widget 15
              output: not added mixer/selector widget 43
            output: not added mixer/selector widget 17
          output: not added mixer/selector widget 19
          output: not added mixer/selector widget 20
          output: not added mixer/selector widget 21
          output: not added mixer/selector widget 22
            output: not added mixer/selector widget 16
          output: not added mixer/selector widget 23
          output: not added mixer/selector widget 24
      output: added mixer/selector widget 10
        output: added output widget 4
      output: added mixer/selector widget 10
        output: added output widget 5
      output: added mixer/selector widget 10
    add pin widget 26
  look at pin widget 27 (1 inputs)
    try widget 11: 0x822fba0c
    widget 11 is candidate
        output: added output widget 4
      output: added mixer/selector widget 11
    add pin widget 27
  look at pin widget 28 (1 inputs)
    try widget 12: 0x822fbab8
    widget 12 is candidate
        output: added output widget 4
      output: added mixer/selector widget 12
    add pin widget 28
  look at pin widget 29 (1 inputs)
    try widget 13: 0x822fbb64
    widget 13 is candidate
        output: added output widget 5
      output: added mixer/selector widget 13
        output: not added mixer/selector widget 8
    add pin widget 29
  look at pin widget 30 (1 inputs)
    try widget 14: 0x822fbc10
    widget 14 is candidate
        output: not added mixer/selector widget 8
            output: not added mixer/selector widget 39
            output: not added mixer/selector widget 40
            output: not added mixer/selector widget 41
            output: not added mixer/selector widget 42
          output: not added mixer/selector widget 15
              output: not added mixer/selector widget 39
              output: not added mixer/selector widget 40
              output: not added mixer/selector widget 41
              output: not added mixer/selector widget 42
            output: not added mixer/selector widget 15
          output: not added mixer/selector widget 43
        output: not added mixer/selector widget 17
      output: not added mixer/selector widget 14
build input tree
  look at input widget 6 (1 inputs)
    try widget 18: 0x822fbec0
    widget 18 is candidate
            input: added input widget 31
          input: added mixer/selector widget 15
            input: added input widget 32
          input: added mixer/selector widget 15
            input: not added mixer/selector widget 39
            input: not added mixer/selector widget 40
            input: not added mixer/selector widget 41
            input: not added mixer/selector widget 42
        input: added mixer/selector widget 17
          input: not added mixer/selector widget 43
      input: added mixer/selector widget 18
        input: added input widget 34
      input: added mixer/selector widget 18
        input: not added mixer/selector widget 16
          input: not added mixer/selector widget 9
          input: not added mixer/selector widget 19
          input: not added mixer/selector widget 20
          input: not added mixer/selector widget 21
          input: not added mixer/selector widget 22
            input: not added mixer/selector widget 16
          input: not added mixer/selector widget 23
          input: not added mixer/selector widget 24
        input: not added mixer/selector widget 7
            input: not added mixer/selector widget 9
            input: not added mixer/selector widget 19
            input: not added mixer/selector widget 20
            input: not added mixer/selector widget 21
            input: not added mixer/selector widget 22
              input: not added mixer/selector widget 16
            input: not added mixer/selector widget 23
            input: not added mixer/selector widget 24
          input: not added mixer/selector widget 7
        input: not added mixer/selector widget 8
    add pin widget 6
build tree!
    Audiogroup:
2: Audio output
    Supported power states: 
    [Digital] [Conn. list] [Format override] [Stereo] 
    Inputs: <1> 6 
3: Audio output
    Supported power states: D0 D3 
    [Power] [Proc widget] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
4: Audio output
    Supported power states: D0 D3 
    [Power] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
5: Audio output
    Supported power states: D0 D3 
    [Power] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
6: Audio input
    Supported power states: D0 D3 
    [Power] [Conn. list] [Format override] [Stereo] 
    Inputs: <18> 
7: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <3> 9 19 20 21 22 23 24 
8: Audio mixer
    Supported power states: 
    [Conn. list] 
    Inputs: <7> 
9: Audio mixer
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [In amplifier] 
    In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
    Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
    Inputs: <4> 5 
10: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <7> 4 5 
11: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: 7 <4> 
12: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <4> 7 
13: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <5> 8 
14: Audio selector
    Supported power states: 
    [Conn. list] 
    Inputs: <8> 17 
15: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
    Inputs: <31> 32 29 29 39 40 41 42 
16: Audio selector
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <32> 28 31 
17: Audio selector
    Supported power states: 
    [L-R swap] [Conn. list] [Proc widget] [Stereo] 
    Inputs: <15> 43 
18: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 15, offset to 0 dB: 0
    Inputs: <17> 34 0 33 16 7 8 35 
19: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <17> 
20: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <35> 
21: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <34> 
22: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <33> 
23: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
    Inputs: <16> 
24: Audio selector
    Supported power states: 
    [Conn. list] [Amplifier override] [Out amplifier] 
    Out Amp: supports mute, step size: 3 dB, # steps: 15, offset to 0 dB: 15
    Inputs: <25> 36 
25: Beep generator
    Supported power states: 
26: Pin complex
    [Imp Sense] [Trigger Req][Pres Detect][HP Drive][Output]
    Supported power states: 
    [Conn. list] [Unsol. responses] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <10> 
27: Pin complex
    [Imp Sense] [Trigger Req][Pres Detect][HP Drive][Output][EAPD]
    Supported power states: 
    [Conn. list] [Unsol. responses] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <11> 
28: Pin complex
    [Imp Sense] [Trigger Req][Pres Detect][Output][Input]
    Supported power states: 
    [Conn. list] [Unsol. responses] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <12> 
29: Pin complex
    [Imp Sense] [Trigger Req][Pres Detect][Output][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80]
    Supported power states: 
    [L-R swap] [Conn. list] [Unsol. responses] [Out amplifier] [Stereo] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <13> 
30: Pin complex
    [Output]
    Supported power states: 
    [Conn. list] [Out amplifier] 
    Out Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 31
    Inputs: <14> 
31: Pin complex
    [Imp Sense] [Trigger Req][Pres Detect][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80]
    Supported power states: 
    [Unsol. responses] [Stereo] 
32: Pin complex
    [Imp Sense] [Trigger Req][Pres Detect][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80]
    Supported power states: 
    [Unsol. responses] [Stereo] 
33: Pin complex
    [Imp Sense] [Trigger Req][Pres Detect][Input]
    Supported power states: 
    [Unsol. responses] [Stereo] 
34: Pin complex
    [Input]
    Supported power states: 
    [Stereo] 
35: Pin complex
    [Input]
    Supported power states: 
36: Pin complex
    [Input]
    Supported power states: 
37: Pin complex
    [Output]
    Supported power states: 
    [Digital] [Conn. list] [Stereo] 
    Inputs: <2> 
38: Power
    Supported power states: D0 D3 
    [Power] [Conn. list] 
    Inputs: <7> 8 19 20 21 22 23 24 
39: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <31> 29 
40: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <31> 32 
41: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <29> 32 
42: Audio mixer
    Supported power states: 
    [Conn. list] [Stereo] 
    Inputs: <31> 29 32 
43: Audio mixer
    Supported power states: 
    [Conn. list] 
    Inputs: <15> 
hda: Enabled unsolicited responses on widget 26
hda: Enabled unsolicited responses on widget 27
hda: Enabled unsolicited responses on widget 28
hda: Enabled unsolicited responses on widget 29
devfs: reload driver "emuxki" (3, 3147794)
hda: Enabled unsolicited responses on widget 31
emuxki: init_hardware()
hda: Enabled unsolicited responses on widget 32
hda: Enabled unsolicited responses on widget 33
UNMUTE/SET OUTPUT GAIN widget 3 (offset 23)
UNMUTE/SET OUTPUT GAIN widget 4 (offset 23)
UNMUTE/SET OUTPUT GAIN widget 5 (offset 23)
UNMUTE/SET OUTPUT GAIN widget 9 (offset 0)
UNMUTE/SET INPUT GAIN widget 9 (offset 0)
ENABLE pin widget 26
UNMUTE/SET OUTPUT GAIN widget 26 (offset 31)
ENABLE pin widget 27
ENABLE EAPD pin widget 27
UNMUTE/SET OUTPUT GAIN widget 27 (offset 31)
ENABLE pin widget 28
UNMUTE/SET OUTPUT GAIN widget 28 (offset 31)
ENABLE pin widget 29
UNMUTE/SET OUTPUT GAIN widget 29 (offset 31)
UNMUTE/SET OUTPUT GAIN widget 15 (offset 0)
UNMUTE/SET OUTPUT GAIN widget 18 (offset 0)
input vref 50 enabled
input vref 80 enabled
ENABLE pin widget 31
input vref 50 enabled
input vref 80 enabled
ENABLE pin widget 32
ENABLE pin widget 34
hda: streams playback 0x856b2df0, record 0x856b2b70
get_description: request_channel_count: 16
HDA: sample size 4, num channels 2, buffer length 2048, **********
IRA: hda_stream_setup_buffers: setup stream 1: SR=48000, SF=24 F=0x31 (0x100)
hda_stream_setup_buffers(Playback): Allocated 32768 bytes for 2 buffers
hda_stream_setup_buffers(Playback): Allocated 4096 bytes for 2 BDLEs
hda: stream: 1 fifo size: 128 num_io_widgets: 3
hda: widgets: 3 4 5 
HDA: sample size 4, num channels 2, buffer length 2048, **********
IRA: hda_stream_setup_buffers: setup stream 2: SR=48000, SF=20 F=0x21 (0x40)
hda_stream_setup_buffers(Recording): Allocated 32768 bytes for 2 buffers
hda_stream_setup_buffers(Recording): Allocated 4096 bytes for 2 BDLEs
hda: stream: 2 fifo size: 64 num_io_widgets: 1
hda: widgets: 6 
hda_stream_start() offset 80
hda_stream_start() offset 0