1 | ~> /system/servers/net_server
|
---|
2 | New service ssh
|
---|
3 | Launch service: /boot/common/bin/sshd
|
---|
4 |
|
---|
5 | [1]+ Stopped /system/servers/net_server
|
---|
6 | ~> bg
|
---|
7 | [1]+ /system/servers/net_server &
|
---|
8 | ~> ifconfig /dev/net/iprowifi2200/0 join Belkin_G_Wireless_9AC45D 7039156118
|
---|
9 | ifconfig: "/dev/net/iprowifi2200/0" is not a WLAN device!
|
---|
10 | ~> ifconfig /dev/net/iprowifi2200/0 up
|
---|
11 | ~> ifconfig /dev/net/iprowifi2200/0 join Belkin_G_Wireless_9AC45D 7039156118
|
---|
12 | ~> Initializing interface '/dev/net/iprowifi2200/0' conf 'N/A' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
|
---|
13 | wpa_driver_bsd_capa: drivercaps=0x05818301,cryptocaps=0x00000000
|
---|
14 | Own MAC address: 00:16:6f:bd:40:ff
|
---|
15 | bsd_set_key: alg=0 addr=0x2290e4 key_idx=0 set_tx=0 seq_len=0 key_len=0
|
---|
16 | bsd_del_key: key_idx=0
|
---|
17 | bsd_set_key: alg=0 addr=0x2290e4 key_idx=1 set_tx=0 seq_len=0 key_len=0
|
---|
18 | bsd_del_key: key_idx=1
|
---|
19 | bsd_set_key: alg=0 addr=0x2290e4 key_idx=2 set_tx=0 seq_len=0 key_len=0
|
---|
20 | bsd_del_key: key_idx=2
|
---|
21 | bsd_set_key: alg=0 addr=0x2290e4 key_idx=3 set_tx=0 seq_len=0 key_len=0
|
---|
22 | bsd_del_key: key_idx=3
|
---|
23 | wpa_driver_bsd_set_countermeasures: enabled=0
|
---|
24 | RSN: flushing PMKID list in the driver
|
---|
25 | State: DISCONNECTED -> INACTIVE
|
---|
26 | Added interface /dev/net/iprowifi2200/0
|
---|
27 | ssid - hexdump_ascii(len=24):
|
---|
28 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
29 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
30 | scan_ssid=1 (0x1)
|
---|
31 | proto: 0x3
|
---|
32 | key_mgmt: 0x2
|
---|
33 | pairwise: 0x19
|
---|
34 | group: 0x1e
|
---|
35 | PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
|
---|
36 | PSK (from passphrase) - hexdump(len=32): [REMOVED]
|
---|
37 | Setting scan request: 0 sec 0 usec
|
---|
38 | State: INACTIVE -> SCANNING
|
---|
39 | Scan SSID - hexdump_ascii(len=24):
|
---|
40 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
41 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
42 | Starting AP scan for wildcard SSID
|
---|
43 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
44 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
45 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
46 | Failed to initiate AP scan.
|
---|
47 | State: SCANNING -> INACTIVE
|
---|
48 | Setting scan request: 1 sec 0 usec
|
---|
49 | State: INACTIVE -> SCANNING
|
---|
50 | Scan SSID - hexdump_ascii(len=24):
|
---|
51 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
52 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
53 | Starting AP scan for wildcard SSID
|
---|
54 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
55 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
56 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
57 | Failed to initiate AP scan.
|
---|
58 | State: SCANNING -> INACTIVE
|
---|
59 | Setting scan request: 1 sec 0 usec
|
---|
60 | State: INACTIVE -> SCANNING
|
---|
61 | Scan SSID - hexdump_ascii(len=24):
|
---|
62 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
63 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
64 | Starting AP scan for wildcard SSID
|
---|
65 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
66 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
67 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
68 | Failed to initiate AP scan.
|
---|
69 | State: SCANNING -> INACTIVE
|
---|
70 | Setting scan request: 1 sec 0 usec
|
---|
71 | State: INACTIVE -> SCANNING
|
---|
72 | Scan SSID - hexdump_ascii(len=24):
|
---|
73 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
74 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
75 | Starting AP scan for wildcard SSID
|
---|
76 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
77 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
78 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
79 | Failed to initiate AP scan.
|
---|
80 | State: SCANNING -> INACTIVE
|
---|
81 | Setting scan request: 1 sec 0 usec
|
---|
82 | State: INACTIVE -> SCANNING
|
---|
83 | Scan SSID - hexdump_ascii(len=24):
|
---|
84 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
85 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
86 | Starting AP scan for wildcard SSID
|
---|
87 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
88 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
89 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
90 | Failed to initiate AP scan.
|
---|
91 | State: SCANNING -> INACTIVE
|
---|
92 | Setting scan request: 1 sec 0 usec
|
---|
93 | State: INACTIVE -> SCANNING
|
---|
94 | Scan SSID - hexdump_ascii(len=24):
|
---|
95 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
96 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
97 | Starting AP scan for wildcard SSID
|
---|
98 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
99 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
100 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
101 | Failed to initiate AP scan.
|
---|
102 | State: SCANNING -> INACTIVE
|
---|
103 | Setting scan request: 1 sec 0 usec
|
---|
104 | State: INACTIVE -> SCANNING
|
---|
105 | Scan SSID - hexdump_ascii(len=24):
|
---|
106 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
107 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
108 | Starting AP scan for wildcard SSID
|
---|
109 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
110 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
111 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
112 | Failed to initiate AP scan.
|
---|
113 | State: SCANNING -> INACTIVE
|
---|
114 | Setting scan request: 1 sec 0 usec
|
---|
115 | State: INACTIVE -> SCANNING
|
---|
116 | Scan SSID - hexdump_ascii(len=24):
|
---|
117 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
118 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
119 | Starting AP scan for wildcard SSID
|
---|
120 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
121 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
122 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
123 | Failed to initiate AP scan.
|
---|
124 | State: SCANNING -> INACTIVE
|
---|
125 | Setting scan request: 1 sec 0 usec
|
---|
126 | State: INACTIVE -> SCANNING
|
---|
127 | Scan SSID - hexdump_ascii(len=24):
|
---|
128 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
129 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
130 | Starting AP scan for wildcard SSID
|
---|
131 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
132 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
133 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
134 | Failed to initiate AP scan.
|
---|
135 | State: SCANNING -> INACTIVE
|
---|
136 | Setting scan request: 1 sec 0 usec
|
---|
137 | State: INACTIVE -> SCANNING
|
---|
138 | Scan SSID - hexdump_ascii(len=24):
|
---|
139 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
140 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
141 | Starting AP scan for wildcard SSID
|
---|
142 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
143 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
144 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
145 | Failed to initiate AP scan.
|
---|
146 | State: SCANNING -> INACTIVE
|
---|
147 | Setting scan request: 1 sec 0 usec
|
---|
148 | State: INACTIVE -> SCANNING
|
---|
149 | Scan SSID - hexdump_ascii(len=24):
|
---|
150 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
151 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
152 | Starting AP scan for wildcard SSID
|
---|
153 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
154 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
155 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
156 | Failed to initiate AP scan.
|
---|
157 | State: SCANNING -> INACTIVE
|
---|
158 | Setting scan request: 1 sec 0 usec
|
---|
159 | State: INACTIVE -> SCANNING
|
---|
160 | Scan SSID - hexdump_ascii(len=24):
|
---|
161 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
162 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
163 | Starting AP scan for wildcard SSID
|
---|
164 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
165 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
166 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
167 | Failed to initiate AP scan.
|
---|
168 | State: SCANNING -> INACTIVE
|
---|
169 | Setting scan request: 1 sec 0 usec
|
---|
170 | State: INACTIVE -> SCANNING
|
---|
171 | Scan SSID - hexdump_ascii(len=24):
|
---|
172 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
173 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
174 | Starting AP scan for wildcard SSID
|
---|
175 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
176 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
177 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
178 | Failed to initiate AP scan.
|
---|
179 | State: SCANNING -> INACTIVE
|
---|
180 | Setting scan request: 1 sec 0 usec
|
---|
181 | State: INACTIVE -> SCANNING
|
---|
182 | Scan SSID - hexdump_ascii(len=24):
|
---|
183 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
184 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
185 | Starting AP scan for wildcard SSID
|
---|
186 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
187 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
188 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
189 | Failed to initiate AP scan.
|
---|
190 | State: SCANNING -> INACTIVE
|
---|
191 | Setting scan request: 1 sec 0 usec
|
---|
192 | State: INACTIVE -> SCANNING
|
---|
193 | Scan SSID - hexdump_ascii(len=24):
|
---|
194 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
195 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
196 | Starting AP scan for wildcard SSID
|
---|
197 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
198 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
199 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
200 | Failed to initiate AP scan.
|
---|
201 | State: SCANNING -> INACTIVE
|
---|
202 | Setting scan request: 1 sec 0 usec
|
---|
203 | State: INACTIVE -> SCANNING
|
---|
204 | Scan SSID - hexdump_ascii(len=24):
|
---|
205 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
206 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
207 | Starting AP scan for wildcard SSID
|
---|
208 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
209 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
210 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
211 | Failed to initiate AP scan.
|
---|
212 | State: SCANNING -> INACTIVE
|
---|
213 | Setting scan request: 1 sec 0 usec
|
---|
214 | State: INACTIVE -> SCANNING
|
---|
215 | Scan SSID - hexdump_ascii(len=24):
|
---|
216 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
217 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
218 | Starting AP scan for wildcard SSID
|
---|
219 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
220 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
221 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
222 | Failed to initiate AP scan.
|
---|
223 | State: SCANNING -> INACTIVE
|
---|
224 | Setting scan request: 1 sec 0 usec
|
---|
225 | State: INACTIVE -> SCANNING
|
---|
226 | Scan SSID - hexdump_ascii(len=24):
|
---|
227 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
228 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
229 | Starting AP scan for wildcard SSID
|
---|
230 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
231 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
232 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
233 | Failed to initiate AP scan.
|
---|
234 | State: SCANNING -> INACTIVE
|
---|
235 | Setting scan request: 1 sec 0 usec
|
---|
236 | State: INACTIVE -> SCANNING
|
---|
237 | Scan SSID - hexdump_ascii(len=24):
|
---|
238 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
239 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
240 | Starting AP scan for wildcard SSID
|
---|
241 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
242 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
243 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
244 | Failed to initiate AP scan.
|
---|
245 | State: SCANNING -> INACTIVE
|
---|
246 | Setting scan request: 1 sec 0 usec
|
---|
247 | State: INACTIVE -> SCANNING
|
---|
248 | Scan SSID - hexdump_ascii(len=24):
|
---|
249 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
250 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
251 | Starting AP scan for wildcard SSID
|
---|
252 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
253 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
254 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
255 | Failed to initiate AP scan.
|
---|
256 | State: SCANNING -> INACTIVE
|
---|
257 | Setting scan request: 1 sec 0 usec
|
---|
258 | State: INACTIVE -> SCANNING
|
---|
259 | Scan SSID - hexdump_ascii(len=24):
|
---|
260 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
261 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
262 | Starting AP scan for wildcard SSID
|
---|
263 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
264 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
265 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
266 | Failed to initiate AP scan.
|
---|
267 | State: SCANNING -> INACTIVE
|
---|
268 | Setting scan request: 1 sec 0 usec
|
---|
269 |
|
---|
270 | ~> State: INACTIVE -> SCANNING
|
---|
271 | Scan SSID - hexdump_ascii(len=24):
|
---|
272 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
273 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
274 | Starting AP scan for wildcard SSID
|
---|
275 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
276 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
277 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
278 | Failed to initiate AP scan.
|
---|
279 | State: SCANNING -> INACTIVE
|
---|
280 | Setting scan request: 1 sec 0 usec
|
---|
281 | State: INACTIVE -> SCANNING
|
---|
282 | Scan SSID - hexdump_ascii(len=24):
|
---|
283 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
284 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
285 | Starting AP scan for wildcard SSID
|
---|
286 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
287 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
288 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
289 | Failed to initiate AP scan.
|
---|
290 | State: SCANNING -> INACTIVE
|
---|
291 | Setting scan request: 1 sec 0 usec
|
---|
292 | State: INACTIVE -> SCANNING
|
---|
293 | Scan SSID - hexdump_ascii(len=24):
|
---|
294 | 42 65 6c 6b 69 6e 5f 47 5f 57 69 72 65 6c 65 73 Belkin_G_Wireles
|
---|
295 | 73 5f 39 41 43 34 35 44 s_9AC45D
|
---|
296 | Starting AP scan for wildcard SSID
|
---|
297 | wpa_driver_bsd_set_wpa: enabled=1
|
---|
298 | wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
|
---|
299 | ioctl[SIOCS80211, op=103, val=0, arg_len=128]: General system error
|
---|
300 | Failed to initiate AP scan.
|
---|
301 | State: SCANNING -> INACTIVE
|
---|
302 | Setting scan request: 1 sec 0 usec
|
---|
303 | Received 3440 bytes of scan results (12 BSSes)
|
---|
304 | BSS: Start scan result update 1
|
---|
305 | BSS: Add new id 0 BSSID 00:22:75:9a:c4:5d SSID 'Belkin_G_Wireless_9AC45D'
|
---|
306 | BSS: Add new id 1 BSSID c0:3f:0e:6e:ab:9e SSID 'DopplegangerS'
|
---|
307 | BSS: Add new id 2 BSSID 58:6d:8f:2d:fd:b4 SSID 'ilovebryant'
|
---|
308 | BSS: Add new id 3 BSSID 00:24:b2:52:e1:fc SSID 'Apartment 4'
|
---|
309 | BSS: Add new id 4 BSSID 00:26:f3:4a:84:d8 SSID 'HOME-84D8'
|
---|
310 | BSS: Add new id 5 BSSID 00:26:f3:4a:84:d9 SSID ''
|
---|
311 | BSS: Add new id 6 BSSID 00:26:f3:4a:84:da SSID ''
|
---|
312 | BSS: Add new id 7 BSSID 00:26:f3:4a:84:db SSID ''
|
---|
313 | BSS: Add new id 8 BSSID c0:c1:c0:00:59:3c SSID 'PeachDog'
|
---|
314 | BSS: Add new id 9 BSSID 58:6d:8f:22:a5:53 SSID 'Glagol'
|
---|
315 | BSS: Add new id 10 BSSID 00:26:f3:de:ee:f8 SSID 'Angela'
|
---|
316 | BSS: Add new id 11 BSSID c0:c1:c0:00:59:3d SSID 'PeachDog-guest'
|
---|
317 | New scan results available
|
---|
318 | Selecting BSS from priority group 0
|
---|
319 | Try to find WPA-enabled AP
|
---|
320 | 0: 00:22:75:9a:c4:5d ssid='Belkin_G_Wireless_9AC45D' wpa_ie_len=26 rsn_ie_len=0 caps=0x31
|
---|
321 | selected based on WPA IE
|
---|
322 | selected WPA AP 00:22:75:9a:c4:5d ssid='Belkin_G_Wireless_9AC45D'
|
---|
323 | Trying to associate with 00:22:75:9a:c4:5d (SSID='Belkin_G_Wireless_9AC45D' freq=2437 MHz)
|
---|
324 | Cancelling scan request
|
---|
325 | WPA: clearing own WPA/RSN IE
|
---|
326 | Automatic auth_alg selection: 0x1
|
---|
327 | WPA: using IEEE 802.11i/D3.0
|
---|
328 | WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
|
---|
329 | WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
|
---|
330 | WPA: clearing AP RSN IE
|
---|
331 | WPA: using GTK TKIP
|
---|
332 | WPA: using PTK CCMP
|
---|
333 | WPA: using KEY_MGMT WPA-PSK
|
---|
334 | WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
|
---|
335 | No keys have been configured - skip key clearing
|
---|
336 | State: INACTIVE -> ASSOCIATING
|
---|
337 | wpa_driver_bsd_associate: ssid 'Belkin_G_Wireless_9AC45D' wpa ie len 24 pairwise 3 group 2 key mgmt 1
|
---|
338 | wpa_driver_bsd_set_drop_unencrypted: enabled=1
|
---|
339 | bsd_set_opt_ie: set WPA+RSN ie (len 24)
|
---|
340 | wpa_driver_bsd_associate: set PRIVACY 1
|
---|
341 | Setting authentication timeout: 10 sec 0 usec
|
---|
342 | State: ASSOCIATING -> ASSOCIATED
|
---|
343 | Associated to a new BSS: BSSID=00:22:75:9a:c4:5d
|
---|
344 | No keys have been configured - skip key clearing
|
---|
345 | Associated with 00:22:75:9a:c4:5d
|
---|
346 | WPA: Association event - clear replay counter
|
---|
347 | WPA: Clear old PTK
|
---|
348 | Setting authentication timeout: 10 sec 0 usec
|
---|
349 | Cancelling scan request
|
---|
350 | fg
|
---|
351 | /system/servers/net_server
|
---|
352 | RX EAPOL from 00:22:75:9a:c4:5d
|
---|
353 | RX EAPOL - hexdump(len=99): 01 03 00 5f fe 00 8a 00 10 00 00 00 00 00 00 06 f9 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d b7 ff 75 1c a1 97 f7 88 30 57 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
---|
354 | Setting authentication timeout: 10 sec 0 usec
|
---|
355 | IEEE 802.1X RX: version=1 type=3 length=95
|
---|
356 | EAPOL-Key type=254
|
---|
357 | key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
|
---|
358 | key_length=16 key_data_length=0
|
---|
359 | replay_counter - hexdump(len=8): 00 00 00 00 00 00 06 f9
|
---|
360 | key_nonce - hexdump(len=32): 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d b7 ff 75 1c a1 97 f7 88 30 57
|
---|
361 | key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
---|
362 | key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
|
---|
363 | key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
|
---|
364 | key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
---|
365 | WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 00 8a 00 10 00 00 00 00 00 00 06 f9 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d b7 ff 75 1c a1 97 f7 88 30 57 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
---|
366 | State: ASSOCIATED -> 4WAY_HANDSHAKE
|
---|
367 | WPA: RX message 1 of 4-Way Handshake from 00:22:75:9a:c4:5d (ver=2)
|
---|
368 | WPA: Renewed SNonce - hexdump(len=32): 6c 40 e3 75 bb 70 8e 6d 4d bb be e3 05 fd 6c 96 61 52 f3 14 48 c2 4c d9 3b d7 72 52 e6 4f 64 82
|
---|
369 | WPA: PTK derivation - A1=00:16:6f:bd:40:ff A2=00:22:75:9a:c4:5d
|
---|
370 | WPA: PMK - hexdump(len=32): [REMOVED]
|
---|
371 | WPA: PTK - hexdump(len=48): [REMOVED]
|
---|
372 | WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
|
---|
373 | WPA: Sending EAPOL-Key 2/4
|
---|
374 | WPA: TX EAPOL-Key - hexdump(len=123): 01 03 00 77 fe 01 0a 00 10 00 00 00 00 00 00 06 f9 6c 40 e3 75 bb 70 8e 6d 4d bb be e3 05 fd 6c 96 61 52 f3 14 48 c2 4c d9 3b d7 72 52 e6 4f 64 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 72 97 59 67 4e 6e c0 fd b0 fb ec d0 b3 d8 77 15 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
|
---|
375 | RX EAPOL from 00:22:75:9a:c4:5d
|
---|
376 | RX EAPOL - hexdump(len=127): 01 03 00 7b fe 01 ca 00 10 00 00 00 00 00 00 06 fa 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d b7 ff 75 1c a1 97 f7 88 30 57 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ab d2 c5 74 3b 97 50 06 2b ef 76 d6 57 fa f2 0d 00 1c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
|
---|
377 | IEEE 802.1X RX: version=1 type=3 length=123
|
---|
378 | EAPOL-Key type=254
|
---|
379 | key_info 0x1ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC)
|
---|
380 | key_length=16 key_data_length=28
|
---|
381 | replay_counter - hexdump(len=8): 00 00 00 00 00 00 06 fa
|
---|
382 | key_nonce - hexdump(len=32): 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d b7 ff 75 1c a1 97 f7 88 30 57
|
---|
383 | key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
---|
384 | key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
|
---|
385 | key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
|
---|
386 | key_mic - hexdump(len=16): ab d2 c5 74 3b 97 50 06 2b ef 76 d6 57 fa f2 0d
|
---|
387 | WPA: RX EAPOL-Key - hexdump(len=127): 01 03 00 7b fe 01 ca 00 10 00 00 00 00 00 00 06 fa 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d b7 ff 75 1c a1 97 f7 88 30 57 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ab d2 c5 74 3b 97 50 06 2b ef 76 d6 57 fa f2 0d 00 1c dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
|
---|
388 | State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
|
---|
389 | WPA: RX message 3 of 4-Way Handshake from 00:22:75:9a:c4:5d (ver=2)
|
---|
390 | WPA: IE KeyData - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
|
---|
391 | WPA: WPA IE in EAPOL-Key - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
|
---|
392 | WPA: Sending EAPOL-Key 4/4
|
---|
393 | WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 01 0a 00 10 00 00 00 00 00 00 06 fa 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 83 d2 96 12 5f 7f 7b 8f d4 5e e9 6c 03 06 98 00 00
|
---|
394 | WPA: Installing PTK to the driver.
|
---|
395 | WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
|
---|
396 | bsd_set_key: alg=3 addr=0x18085368 key_idx=0 set_tx=1 seq_len=6 key_len=16
|
---|
397 | State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
|
---|
398 | RX EAPOL from 00:22:75:9a:c4:5d
|
---|
399 | RX EAPOL - hexdump(len=139): 01 03 00 87 fe 03 a2 00 20 00 00 00 00 00 00 06 fb 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d a7 ff 75 1c a1 97 f7 88 30 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b8 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 1f 11 90 64 79 d9 85 87 9f 5a d7 c6 13 9a 6c 00 28 44 ea 51 23 a0 7f 2b 4d e2 8e a2 00 0c 4f 4b 4c 4b d2 bd 4c 28 b2 c4 45 3d 58 08 0f f0 de cb ef ef fd d7 55 21 97 0d 2d
|
---|
400 | IEEE 802.1X RX: version=1 type=3 length=135
|
---|
401 | EAPOL-Key type=254
|
---|
402 | key_info 0x3a2 (ver=2 keyidx=2 rsvd=0 Group Ack MIC Secure)
|
---|
403 | key_length=32 key_data_length=40
|
---|
404 | replay_counter - hexdump(len=8): 00 00 00 00 00 00 06 fb
|
---|
405 | key_nonce - hexdump(len=32): 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d a7 ff 75 1c a1 97 f7 88 30 47
|
---|
406 | key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
---|
407 | key_rsc - hexdump(len=8): b8 2f 00 00 00 00 00 00
|
---|
408 | key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
|
---|
409 | key_mic - hexdump(len=16): 7f 1f 11 90 64 79 d9 85 87 9f 5a d7 c6 13 9a 6c
|
---|
410 | WPA: RX EAPOL-Key - hexdump(len=139): 01 03 00 87 fe 03 a2 00 20 00 00 00 00 00 00 06 fb 6c 08 13 36 95 89 0c 3d 31 d0 96 99 c2 cc 12 b3 d2 5d 4e 0e 97 6d a7 ff 75 1c a1 97 f7 88 30 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b8 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 1f 11 90 64 79 d9 85 87 9f 5a d7 c6 13 9a 6c 00 28 44 ea 51 23 a0 7f 2b 4d e2 8e a2 00 0c 4f 4b 4c 4b d2 bd 4c 28 b2 c4 45 3d 58 08 0f f0 de cb ef ef fd d7 55 21 97 0d 2d
|
---|
411 | WPA: RX message 1 of Group Key Handshake from 00:22:75:9a:c4:5d (ver=2)
|
---|
412 | State: GROUP_HANDSHAKE -> GROUP_HANDSHAKE
|
---|
413 | WPA: Group Key - hexdump(len=32): [REMOVED]
|
---|
414 | WPA: Installing GTK to the driver (keyidx=2 tx=0 len=32).
|
---|
415 | WPA: RSC - hexdump(len=6): b8 2f 00 00 00 00
|
---|
416 | bsd_set_key: alg=2 addr=0x22579c key_idx=2 set_tx=0 seq_len=6 key_len=32
|
---|
417 | WPA: Sending EAPOL-Key 2/2
|
---|
418 | WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 03 22 00 20 00 00 00 00 00 00 06 fb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 1d 2d 71 46 e9 d8 00 e8 00 2c 0e 12 a8 00 51 00 00
|
---|
419 | WPA: Key negotiation completed with 00:22:75:9a:c4:5d [PTK=CCMP GTK=TKIP]
|
---|
420 | Cancelling authentication timeout
|
---|
421 | State: GROUP_HANDSHAKE -> COMPLETED
|
---|
422 | CTRL-EVENT-CONNECTED - Connection to 00:22:75:9a:c4:5d completed (auth) [id=0 id_str=]
|
---|
423 |
|
---|
424 | ~> CTRL-EVENT-TERMINATING - signal 2 received
|
---|
425 | Removing interface /dev/net/iprowifi2200/0
|
---|
426 | bsd_set_key: alg=0 addr=0x2290e4 key_idx=0 set_tx=0 seq_len=0 key_len=0
|
---|
427 | bsd_del_key: key_idx=0
|
---|
428 | bsd_set_key: alg=0 addr=0x2290e4 key_idx=1 set_tx=0 seq_len=0 key_len=0
|
---|
429 | bsd_del_key: key_idx=1
|
---|
430 | bsd_set_key: alg=0 addr=0x2290e4 key_idx=2 set_tx=0 seq_len=0 key_len=0
|
---|
431 | bsd_del_key: key_idx=2
|
---|
432 | bsd_set_key: alg=0 addr=0x2290e4 key_idx=3 set_tx=0 seq_len=0 key_len=0
|
---|
433 | bsd_del_key: key_idx=3
|
---|
434 | bsd_set_key: alg=0 addr=0x18054434 key_idx=0 set_tx=0 seq_len=0 key_len=0
|
---|
435 | bsd_del_key: addr=00:22:75:9a:c4:5d
|
---|
436 | State: COMPLETED -> DISCONNECTED
|
---|
437 | wpa_driver_bsd_set_countermeasures: enabled=0
|
---|
438 | No keys have been configured - skip key clearing
|
---|
439 | BSS: Remove id 0 BSSID 00:22:75:9a:c4:5d SSID 'Belkin_G_Wireless_9AC45D'
|
---|
440 | BSS: Remove id 1 BSSID c0:3f:0e:6e:ab:9e SSID 'DopplegangerS'
|
---|
441 | BSS: Remove id 2 BSSID 58:6d:8f:2d:fd:b4 SSID 'ilovebryant'
|
---|
442 | BSS: Remove id 3 BSSID 00:24:b2:52:e1:fc SSID 'Apartment 4'
|
---|
443 | BSS: Remove id 4 BSSID 00:26:f3:4a:84:d8 SSID 'HOME-84D8'
|
---|
444 | BSS: Remove id 5 BSSID 00:26:f3:4a:84:d9 SSID ''
|
---|
445 | BSS: Remove id 6 BSSID 00:26:f3:4a:84:da SSID ''
|
---|
446 | BSS: Remove id 7 BSSID 00:26:f3:4a:84:db SSID ''
|
---|
447 | BSS: Remove id 8 BSSID c0:c1:c0:00:59:3c SSID 'PeachDog'
|
---|
448 | BSS: Remove id 9 BSSID 58:6d:8f:22:a5:53 SSID 'Glagol'
|
---|
449 | BSS: Remove id 10 BSSID 00:26:f3:de:ee:f8 SSID 'Angela'
|
---|
450 | BSS: Remove id 11 BSSID c0:c1:c0:00:59:3d SSID 'PeachDog-guest'
|
---|
451 | Cancelling scan request
|
---|
452 | Cancelling authentication timeout
|
---|
453 | wpa_driver_bsd_set_wpa: enabled=0
|
---|
454 | wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
|
---|
455 | bsd_set_opt_ie: set WPA+RSN ie (len 0)
|
---|
456 | ioctl[SIOCS80211, op=26, val=0, arg_len=0]: General system error
|
---|
457 | wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
|
---|
458 | bsd_set_opt_ie: set WPA+RSN ie (len 0)
|
---|
459 | ioctl[SIOCS80211, op=26, val=0, arg_len=0]: General system error
|
---|