options = 0 No APM available. smp: using ACPI to detect MP configuration smp: local apic address is 0xfee00000 smp: found local APIC with id 0 smp: found local APIC with id 1 smp: found local APIC with id 2 smp: found local APIC with id 3 smp: found local APIC with id 0 smp: APIC is disabled and will not be used smp: found local APIC with id 0 smp: APIC is disabled and will not be used smp: found local APIC with id 0 smp: APIC is disabled and will not be used smp: found local APIC with id 0 smp: APIC is disabled and will not be used smp: found io APIC with id 0 and address 0xfec00000 VESA version = 3.0, capabilities 1 OEM string: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS 0x160: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x161: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x162: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x163: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x164: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x165: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x166: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x167: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x168: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x169: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x16a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x16b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x16c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x16d: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x16e: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x16f: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x170: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x171: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x13c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x14d: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x15c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x13a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x14b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x15a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x107: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x11a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x11b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x105: 1024 x 768 x 8 (a = 155, mem = 4, phy = b0000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x117: 1024 x 768 x 16 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1) mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 0x118: 1024 x 768 x 32 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1) mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 0x112: 640 x 480 x 32 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1) mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 0x114: 800 x 600 x 16 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1) mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 0x115: 800 x 600 x 32 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1) mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 0x101: 640 x 480 x 8 (a = 155, mem = 4, phy = b0000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x103: 800 x 600 x 8 (a = 155, mem = 4, phy = b0000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x111: 640 x 480 x 16 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1) mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 0x17d: 1366 x 768 x 8 (a = 155, mem = 4, phy = b0000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x17e: 1366 x 768 x 16 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1) mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 0x17f: 1366 x 768 x 32 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1) mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 Using mode 0x118 VESA compatible graphics! EDID1: 4f EDID2: ebx 102 EDID3: 4f Vendor: LGD Product ID: 885 Serial #: 0 Produced in week/year: 0/2012 EDID version: 1.4 Type: Digital Size: 31 cm x 17 cm Gamma=2.2 White (X,Y)=(0.313,0.329) Supported Future Video Modes: Supported VESA Video Modes: Additional Video Mode (1366x768@59Hz): clock=70 MHz h: (1366, 1402, 1450, 1492) v: (768, 771, 776, 782) size: 30.9 cm x 17.4 cm border: 0 cm x 0 cm Ascii Data: LG Display Ascii Data: LP140WH7-TSA1 crtc: h 1402/1450/1492, v 771/776/782, pixel clock 70000000, refresh 6023 Welcome to the Haiku boot loader! number of drives: 3 add_partitions_for(0x00105300, mountFS = no) add_partitions_for(fd = 0, mountFS = no) 0x001055e8 Partition::Partition 0x001055e8 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map priority: 810 check for partitioning_system: Intel Extended Partition 0x00105760 Partition::Partition 0x001055e8 Partition::AddChild 0x00105760 0x00105760 Partition::SetParent 0x001055e8 new child partition! 0x001055e8 Partition::Scan(): scan child 0x00105760 (start = 32768, size = 8053063680, parent = 0x001055e8)! 0x00105760 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition 0x001055e8 Partition::~Partition 0x00105760 Partition::SetParent 0x00000000 boot partition offset: 32768 0x00105760 Partition::_Mount check for file_system: BFS Filesystem PackageVolumeInfo::SetTo() PackageVolumeInfo::_InitState(): failed to parse activated-packages: No such file or directory load kernel kernel_x86... video mode: 1366x768x32 maximum boot loader heap usage: 489448, currently used: 479136 smp: found 4 cpus smp: apic_phys = 0xfee00000 smp: ioapic_phys = 0xfec00000 smp: apic (mapped) = 0x81950000 APIC ticks/sec = 99740847 trampolining other cpus wait for delivery deassert INIT wait for delivery num startups = 2 send STARTUP wait for delivery send STARTUP wait for delivery wait for delivery deassert INIT wait for delivery num startups = 2 send STARTUP wait for delivery send STARTUP wait for delivery wait for delivery deassert INIT wait for delivery num startups = 2 send STARTUP wait for delivery send STARTUP wait for delivery done trampolining kernel entry at 80065e98 Welcome to kernel debugger output! Haiku revision: hrev50095 reserve_io_interrupt_vectors: reserved 2 vectors starting from 98 CPU 0: type 0 family 6 extended_family 0 model 10 extended_model 3 stepping 9, string 'GenuineIntel' CPU 0: vendor 'Intel' model name 'Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz' CPU 0: apic id 0, package 0, core 0, smt 0 CPU 0: cache sharing: L1 id 0, L2 id 0, L3 id 0 CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline aes xsave avx f16c rdrnd nx long dts itb arat pln ecmd ptm aperfmperf epb reserve_io_interrupt_vectors: reserved 16 vectors starting from 0 using PAE paging mark_page_range_in_use(0x0, 0x100): start page is before free list mark_page_range_in_use(0x0, 0xa0): start page is before free list add_memory_type_range(4, 0x0, 0xa0000, 6) add_memory_type_range(5, 0xe0000, 0x20000, 6) add_memory_type_range(90, 0xb0000000, 0x408000, 0) Welcome to syslog debug output! Haiku revision: hrev50095 found x2apic mapping local apic at 0x81950000 add_memory_type_range(93, 0xfee00000, 0x1000, 0) CPU 2: type 0 family 6 extended_family 0 model 10 extended_model 3 stepping 9, string 'GenuineIntel' CPU 3: type 0 family 6 extended_family 0 model 10 extended_model 3 stepping 9, string 'GenuineIntel' CPU 1: type 0 family 6 extended_family 0 model 10 extended_model 3 stepping 9, string 'GenuineIntel' CPU 2: vendor 'Intel' model name 'Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz' CPU 3: vendor 'Intel' model name 'Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz' CPU 2: apic id 2, package 0, core 1, smt 0 CPU 3: apic id 3, package 0, core 1, smt 1 CPU 2: cache sharing: L1 id 2, L2 id 2, L3 id 0 CPU 3: cache sharing: L1 id 2, L2 id 2, L3 id 0 CPU 2: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline aes xsave avx f16c rdrnd nx long dts itb arat pln ecmd ptm aperfmperf epb CPU 3: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline aes xsave avx f16c rdrnd nx long dts itb arat pln ecmd ptm aperfmperf epb CPU 1: vendor 'Intel' model name 'Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz' CPU 1: apic id 1, package 0, core 0, smt 1 CPU 1: cache sharing: L1 id 0, L2 id 0, L3 id 0 CPU 1: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline aes xsave avx f16c rdrnd nx long dts itb arat pln ecmd ptm aperfmperf epb setting up apic for CPU 0: apic id 0, version 17170453 CPU 0: logical apic id: 0x1 x86_init_fpu: CPU has SSE... enabling FXSR and XMM. reserve_io_interrupt_vectors: reserved 3 vectors starting from 221 reserve_io_interrupt_vectors: reserved 1 vectors starting from 219 arch_init_timer: using APIC timer. allocate_commpage_entry(2, 12) -> 0x00000100 scheduler_init: found 4 logical cpus and 3 cache levels scheduler switches: single core: false, cpu load tracking: false, core load tracking: true scheduler: switching to low latency mode apm_init() msi support enabled PCI: pci_module_init add_memory_type_range(99, 0x0, 0x1000, 0) remove_memory_type_range(99, 0x0, 0x1000, 0) add_memory_type_range(100, 0x9f000, 0x1000, 0) remove_memory_type_range(100, 0x9f000, 0x1000, 0) add_memory_type_range(101, 0xe0000, 0x20000, 0) add_memory_type_range(102, 0xa6ffe000, 0x1000, 0) remove_memory_type_range(101, 0xe0000, 0x20000, 0) add_memory_type_range(103, 0xa6ffb000, 0x1000, 0) remove_memory_type_range(103, 0xa6ffb000, 0x1000, 0) add_memory_type_range(104, 0xa6ffd000, 0x1000, 0) remove_memory_type_range(104, 0xa6ffd000, 0x1000, 0) add_memory_type_range(105, 0xa6ffc000, 0x1000, 0) remove_memory_type_range(105, 0xa6ffc000, 0x1000, 0) add_memory_type_range(106, 0xa6ffa000, 0x1000, 0) remove_memory_type_range(106, 0xa6ffa000, 0x1000, 0) add_memory_type_range(107, 0xa6ff9000, 0x1000, 0) remove_memory_type_range(107, 0xa6ff9000, 0x1000, 0) add_memory_type_range(108, 0xa6ff8000, 0x1000, 0) remove_memory_type_range(108, 0xa6ff8000, 0x1000, 0) add_memory_type_range(109, 0xa6ff8000, 0x1000, 0) PCI: mechanism addr: e0000000, seg: 0, start: 0, end: ff add_memory_type_range(110, 0xe0000000, 0x10000000, 0) PCI: mechanism pcie controller found PCI: FixupDevices: checking bus 2 behind 8086:1e10 PCI: FixupDevices: checking bus 3 behind 8086:1e12 PCI: FixupDevices: checking bus 4 behind 8086:1e14 PCI: FixupDevices: checking bus 9 behind 8086:1e1e PCI: dom 0, bus 0, dev 28, func 0, changed PCI bridge control from 0x0000 to 0x0003 PCI: dom 0, bus 0, dev 28, func 1, changed PCI bridge control from 0x0000 to 0x0003 PCI: dom 0, bus 0, dev 28, func 2, changed PCI bridge control from 0x0000 to 0x0003 PCI: dom 0, bus 0, dev 28, func 7, changed PCI bridge control from 0x0000 to 0x0003 PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 0154, revision 09 PCI: class_base 06, class_function 00, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 0154: 3rd Gen Core processor DRAM Controller PCI: info: Bridge (Host bridge) PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0713, subsystem_vendor_id 1025 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: vendspec PCI: [dom 0, bus 0] bus 0, device 2, function 0: vendor 8086, device 0166, revision 09 PCI: class_base 03, class_function 00, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 0166: 3rd Gen Core processor Graphics Controller PCI: info: Display controller (VGA compatible controller, VGA controller) PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0712, subsystem_vendor_id 1025 PCI: interrupt_line 07, interrupt_pin 01, min_grant 00, max_latency 00 PCI: base reg 0: host c2000000, pci c2000000, size 00400000, flags 04 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host b0000000, pci b0000000, size 10000000, flags 0c PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00003000, pci 00003000, size 00000040, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: MSI, PM, AdvancedFeatures PCI: [dom 0, bus 0] bus 0, device 22, function 0: vendor 8086, device 1e3a, revision 04 PCI: class_base 07, class_function 80, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 1e3a: 7 Series/C210 Series Chipset Family MEI Controller #1 PCI: info: Communication controller PCI: line_size 00, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0713, subsystem_vendor_id 1025 PCI: interrupt_line 07, interrupt_pin 01, min_grant 00, max_latency 00 PCI: base reg 0: host c2804000, pci c2804000, size 00000010, flags 04 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, MSI PCI: [dom 0, bus 0] bus 0, device 26, function 0: vendor 8086, device 1e2d, revision 04 PCI: class_base 0c, class_function 03, class_api 20 PCI: vendor 8086: Intel Corporation PCI: device 1e2d: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 PCI: info: Serial bus controller (USB controller, EHCI) PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0713, subsystem_vendor_id 1025 PCI: interrupt_line 07, interrupt_pin 01, min_grant 00, max_latency 00 PCI: base reg 0: host c2809000, pci c2809000, size 00000400, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, DebugPort, AdvancedFeatures PCI: [dom 0, bus 0] bus 0, device 27, function 0: vendor 8086, device 1e20, revision 04 PCI: class_base 04, class_function 03, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 1e20: 7 Series/C210 Series Chipset Family High Definition Audio Controller PCI: info: Multimedia controller (Audio device) PCI: line_size 10, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0713, subsystem_vendor_id 1025 PCI: interrupt_line 0a, interrupt_pin 01, min_grant 00, max_latency 00 PCI: base reg 0: host c2800000, pci c2800000, size 00004000, flags 04 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, MSI, PCIe PCI: Extended capabilities: Virtual Channel, Root Complex Link Declaration PCI: [dom 0, bus 0] bus 0, device 28, function 0: vendor 8086, device 1e10, revision c4 PCI: class_base 06, class_function 04, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 1e10: 7 Series/C210 Series Chipset Family PCI Express Root Port 1 PCI: info: Bridge (PCI bridge, Normal decode) PCI: line_size 10, latency 00, header_type 81, BIST 00 PCI: subsystem_id 0000, subsystem_vendor_id 0040 PCI: primary_bus 00, secondary_bus 02, subordinate_bus 02, secondary_latency 00 PCI: I/O window f000-0fff PCI: memory window fff00000-000fffff PCI: prefetchable memory window fffffffffff00000-00000000000fffff PCI: bridge_control 0003, secondary_status 0000 PCI: interrupt_line 0b, interrupt_pin 01 PCI: ROM base host 00000000, pci 00000000, size ?? PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PCIe, MSI, subvendor, PM PCI: Extended capabilities: (empty list) PCI: [dom 0, bus 0] bus 0, device 28, function 1: vendor 8086, device 1e12, revision c4 PCI: class_base 06, class_function 04, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 1e12: 7 Series/C210 Series Chipset Family PCI Express Root Port 2 PCI: info: Bridge (PCI bridge, Normal decode) PCI: line_size 10, latency 00, header_type 81, BIST 00 PCI: subsystem_id 0000, subsystem_vendor_id 0040 PCI: primary_bus 00, secondary_bus 03, subordinate_bus 03, secondary_latency 00 PCI: I/O window 2000-2fff PCI: memory window c1000000-c1ffffff PCI: prefetchable memory window 00000000c0000000-00000000c0ffffff PCI: bridge_control 0003, secondary_status 0000 PCI: interrupt_line 07, interrupt_pin 02 PCI: ROM base host 00000000, pci 00000000, size ?? PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PCIe, MSI, subvendor, PM PCI: Extended capabilities: (empty list) PCI: [dom 0, bus 3] bus 3, device 0, function 0: vendor 10ec, device 5209, revision 01 PCI: class_base ff, class_function 00, class_api 00 PCI: vendor 10ec: Realtek Semiconductor Co., Ltd. PCI: device 5209: RTS5209 PCI Express Card Reader PCI: info: (Unknown) (255:0:0) PCI: line_size 10, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 5209, subsystem_vendor_id 10ec PCI: interrupt_line 0b, interrupt_pin 01, min_grant 00, max_latency 00 PCI: base reg 0: host c1001000, pci c1001000, size 00001000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, MSI, PCIe PCI: Extended capabilities: Advanced Error Reporting, Serial Number PCI: [dom 0, bus 3] bus 3, device 0, function 1: vendor 10ec, device 5209, revision 01 PCI: class_base 08, class_function 05, class_api 00 PCI: vendor 10ec: Realtek Semiconductor Co., Ltd. PCI: device 5209: RTS5209 PCI Express Card Reader PCI: info: Generic system peripheral (SD Host controller) PCI: line_size 10, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 5209, subsystem_vendor_id 10ec PCI: interrupt_line 0b, interrupt_pin 02, min_grant 00, max_latency 00 PCI: base reg 0: host c1000000, pci c1000000, size 00000100, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, MSI, PCIe PCI: Extended capabilities: Advanced Error Reporting, Serial Number PCI: [dom 0, bus 0] bus 0, device 28, function 2: vendor 8086, device 1e14, revision c4 PCI: class_base 06, class_function 04, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 1e14: 7 Series/C210 Series Chipset Family PCI Express Root Port 3 PCI: info: Bridge (PCI bridge, Normal decode) PCI: line_size 10, latency 00, header_type 81, BIST 00 PCI: subsystem_id 0000, subsystem_vendor_id 0040 PCI: primary_bus 00, secondary_bus 04, subordinate_bus 04, secondary_latency 00 PCI: I/O window f000-0fff PCI: memory window c2700000-c27fffff PCI: prefetchable memory window fffffffffff00000-00000000000fffff PCI: bridge_control 0003, secondary_status 0000 PCI: interrupt_line 0b, interrupt_pin 03 PCI: ROM base host 00000000, pci 00000000, size ?? PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PCIe, MSI, subvendor, PM PCI: Extended capabilities: (empty list) PCI: [dom 0, bus 4] bus 4, device 0, function 0: vendor 14e4, device 1692, revision 01 PCI: class_base 02, class_function 00, class_api 00 PCI: vendor 14e4: Broadcom Corporation PCI: device 1692: NetLink BCM57780 Gigabit Ethernet PCIe PCI: info: Network controller (Ethernet controller) PCI: line_size 10, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0712, subsystem_vendor_id 1025 PCI: interrupt_line 0b, interrupt_pin 01, min_grant 00, max_latency 00 PCI: base reg 0: host c2700000, pci c2700000, size 00010000, flags 04 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, vendspec, MSI, PCIe PCI: Extended capabilities: Advanced Error Reporting, Virtual Channel, Serial Number, Power Budgeting PCI: [dom 0, bus 0] bus 0, device 28, function 7: vendor 8086, device 1e1e, revision c4 PCI: class_base 06, class_function 04, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 1e1e: 7 Series/C210 Series Chipset Family PCI Express Root Port 8 PCI: info: Bridge (PCI bridge, Normal decode) PCI: line_size 10, latency 00, header_type 81, BIST 00 PCI: subsystem_id 0000, subsystem_vendor_id 0040 PCI: primary_bus 00, secondary_bus 09, subordinate_bus 09, secondary_latency 00 PCI: I/O window f000-0fff PCI: memory window c2400000-c26fffff PCI: prefetchable memory window fffffffffff00000-00000000000fffff PCI: bridge_control 0003, secondary_status 0000 PCI: interrupt_line ff, interrupt_pin 00 PCI: ROM base host 00000000, pci 00000000, size ?? PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PCIe, MSI, subvendor, PM PCI: Extended capabilities: (empty list) PCI: [dom 0, bus 9] bus 9, device 0, function 0: vendor 14e4, device 43b1, revision 03 PCI: class_base 02, class_function 80, class_api 00 PCI: vendor 14e4: Broadcom Corporation PCI: device 43b1: BCM4352 802.11ac Wireless Network Adapter PCI: info: Network controller PCI: line_size 10, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 2123, subsystem_vendor_id 1a3b PCI: interrupt_line 0a, interrupt_pin 01, min_grant 00, max_latency 00 PCI: base reg 0: host c2600000, pci c2600000, size 00008000, flags 04 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host c2400000, pci c2400000, size 00200000, flags 04 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, MSI, vendspec, PCIe PCI: Extended capabilities: Advanced Error Reporting, Serial Number, Power Budgeting, Virtual Channel, Latency Tolerance Reporting, Resizable Bar PCI: [dom 0, bus 0] bus 0, device 29, function 0: vendor 8086, device 1e26, revision 04 PCI: class_base 0c, class_function 03, class_api 20 PCI: vendor 8086: Intel Corporation PCI: device 1e26: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 PCI: info: Serial bus controller (USB controller, EHCI) PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0713, subsystem_vendor_id 1025 PCI: interrupt_line 07, interrupt_pin 01, min_grant 00, max_latency 00 PCI: base reg 0: host c2808000, pci c2808000, size 00000400, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, DebugPort, AdvancedFeatures PCI: [dom 0, bus 0] bus 0, device 31, function 0: vendor 8086, device 1e57, revision 04 PCI: class_base 06, class_function 01, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 1e57: HM77 Express Chipset LPC Controller PCI: info: Bridge (ISA bridge) PCI: line_size 00, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0713, subsystem_vendor_id 1025 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: vendspec PCI: [dom 0, bus 0] bus 0, device 31, function 2: vendor 8086, device 1e03, revision 04 PCI: class_base 01, class_function 06, class_api 01 PCI: vendor 8086: Intel Corporation PCI: device 1e03: 7 Series Chipset Family 6-port SATA Controller [AHCI mode] PCI: info: Mass storage controller (SATA controller, AHCI 1.0) PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0713, subsystem_vendor_id 1025 PCI: interrupt_line 0a, interrupt_pin 02, min_grant 00, max_latency 00 PCI: base reg 0: host 00003088, pci 00003088, size 00000008, flags 01 PCI: base reg 1: host 00003094, pci 00003094, size 00000004, flags 01 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00003090, pci 00003090, size 00000004, flags 01 PCI: base reg 4: host 00003060, pci 00003060, size 00000020, flags 01 PCI: base reg 5: host c2807000, pci c2807000, size 00000800, flags 00 PCI: Capabilities: MSI, PM, SATA, AdvancedFeatures PCI: [dom 0, bus 0] bus 0, device 31, function 3: vendor 8086, device 1e22, revision 04 PCI: class_base 0c, class_function 05, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 1e22: 7 Series/C210 Series Chipset Family SMBus Controller PCI: info: Serial bus controller (SMBus) PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0713, subsystem_vendor_id 1025 PCI: interrupt_line 0a, interrupt_pin 03, min_grant 00, max_latency 00 PCI: base reg 0: host c2805000, pci c2805000, size 00000100, flags 04 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00003040, pci 00003040, size 00000020, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) add_memory_type_range(112, 0x0, 0x1000, 0) remove_memory_type_range(112, 0x0, 0x1000, 0) add_memory_type_range(113, 0x9d000, 0x1000, 0) remove_memory_type_range(113, 0x9d000, 0x1000, 0) add_memory_type_range(114, 0xe0000, 0x20000, 0) remove_memory_type_range(114, 0xe0000, 0x20000, 0) add_memory_type_range(115, 0xfe000, 0x1000, 0) ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) remove_memory_type_range(115, 0xfe000, 0x1000, 0) add_memory_type_range(116, 0xa6ffe000, 0x1000, 0) ACPI: XSDT 0x00000000A6FFE210 00009C (v01 ACRSYS ACRPRDCT 00000001 01000013) remove_memory_type_range(116, 0xa6ffe000, 0x1000, 0) add_memory_type_range(117, 0xa6ffe000, 0x1000, 0) add_memory_type_range(118, 0xa6ffb000, 0x1000, 0) remove_memory_type_range(118, 0xa6ffb000, 0x1000, 0) add_memory_type_range(119, 0xa6ffb000, 0x1000, 0) ACPI: FACP 0x00000000A6FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(119, 0xa6ffb000, 0x1000, 0) add_memory_type_range(120, 0xa6ffb000, 0x1000, 0) remove_memory_type_range(120, 0xa6ffb000, 0x1000, 0) add_memory_type_range(121, 0xa6fec000, 0x1000, 0) remove_memory_type_range(121, 0xa6fec000, 0x1000, 0) add_memory_type_range(122, 0xa6fec000, 0xc000, 0) ACPI: DSDT 0x00000000A6FEC000 00B287 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) remove_memory_type_range(122, 0xa6fec000, 0xc000, 0) add_memory_type_range(123, 0xa6fba000, 0x1000, 0) remove_memory_type_range(123, 0xa6fba000, 0x1000, 0) add_memory_type_range(124, 0xa6fba000, 0x1000, 0) ACPI: FACS 0x00000000A6FBA000 000040 remove_memory_type_range(124, 0xa6fba000, 0x1000, 0) add_memory_type_range(125, 0xa6ffd000, 0x1000, 0) remove_memory_type_range(125, 0xa6ffd000, 0x1000, 0) add_memory_type_range(126, 0xa6ffd000, 0x1000, 0) ACPI: UEFI 0x00000000A6FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(126, 0xa6ffd000, 0x1000, 0) add_memory_type_range(127, 0xa6ffc000, 0x1000, 0) remove_memory_type_range(127, 0xa6ffc000, 0x1000, 0) add_memory_type_range(128, 0xa6ffc000, 0x1000, 0) ACPI: ASF! 0x00000000A6FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(128, 0xa6ffc000, 0x1000, 0) add_memory_type_range(129, 0xa6ffa000, 0x1000, 0) remove_memory_type_range(129, 0xa6ffa000, 0x1000, 0) add_memory_type_range(130, 0xa6ffa000, 0x1000, 0) ACPI: HPET 0x00000000A6FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(130, 0xa6ffa000, 0x1000, 0) add_memory_type_range(131, 0xa6ff9000, 0x1000, 0) remove_memory_type_range(131, 0xa6ff9000, 0x1000, 0) add_memory_type_range(132, 0xa6ff9000, 0x1000, 0) ACPI: APIC 0x00000000A6FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(132, 0xa6ff9000, 0x1000, 0) add_memory_type_range(133, 0xa6ff8000, 0x1000, 0) remove_memory_type_range(133, 0xa6ff8000, 0x1000, 0) add_memory_type_range(134, 0xa6ff8000, 0x1000, 0) ACPI: MCFG 0x00000000A6FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(134, 0xa6ff8000, 0x1000, 0) add_memory_type_range(135, 0xa6feb000, 0x1000, 0) remove_memory_type_range(135, 0xa6feb000, 0x1000, 0) add_memory_type_range(136, 0xa6feb000, 0x1000, 0) ACPI: SLIC 0x00000000A6FEB000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(136, 0xa6feb000, 0x1000, 0) add_memory_type_range(137, 0xa6fea000, 0x1000, 0) remove_memory_type_range(137, 0xa6fea000, 0x1000, 0) add_memory_type_range(138, 0xa6fea000, 0x1000, 0) ACPI: WDAT 0x00000000A6FEA000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(138, 0xa6fea000, 0x1000, 0) add_memory_type_range(139, 0xa6fe8000, 0x1000, 0) remove_memory_type_range(139, 0xa6fe8000, 0x1000, 0) add_memory_type_range(140, 0xa6fe8000, 0x2000, 0) ACPI: SSDT 0x00000000A6FE8000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) remove_memory_type_range(140, 0xa6fe8000, 0x2000, 0) add_memory_type_range(141, 0xa6fe6000, 0x1000, 0) remove_memory_type_range(141, 0xa6fe6000, 0x1000, 0) add_memory_type_range(142, 0xa6fe6000, 0x1000, 0) ACPI: BOOT 0x00000000A6FE6000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(142, 0xa6fe6000, 0x1000, 0) add_memory_type_range(143, 0xa6fe1000, 0x1000, 0) remove_memory_type_range(143, 0xa6fe1000, 0x1000, 0) add_memory_type_range(144, 0xa6fe1000, 0x1000, 0) ACPI: ASPT 0x00000000A6FE1000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(144, 0xa6fe1000, 0x1000, 0) add_memory_type_range(145, 0xa6fdf000, 0x1000, 0) remove_memory_type_range(145, 0xa6fdf000, 0x1000, 0) add_memory_type_range(146, 0xa6fdf000, 0x1000, 0) ACPI: FPDT 0x00000000A6FDF000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(146, 0xa6fdf000, 0x1000, 0) add_memory_type_range(147, 0xa6fdd000, 0x1000, 0) remove_memory_type_range(147, 0xa6fdd000, 0x1000, 0) add_memory_type_range(148, 0xa6fdd000, 0x1000, 0) ACPI: SSDT 0x00000000A6FDD000 0008E4 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) remove_memory_type_range(148, 0xa6fdd000, 0x1000, 0) add_memory_type_range(149, 0xa6fdc000, 0x1000, 0) remove_memory_type_range(149, 0xa6fdc000, 0x1000, 0) add_memory_type_range(150, 0xa6fdc000, 0x1000, 0) ACPI: SSDT 0x00000000A6FDC000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) remove_memory_type_range(150, 0xa6fdc000, 0x1000, 0) add_memory_type_range(151, 0xa6fdb000, 0x1000, 0) remove_memory_type_range(151, 0xa6fdb000, 0x1000, 0) add_memory_type_range(152, 0xa6fdb000, 0x1000, 0) ACPI: DMAR 0x00000000A6FDB000 0000B0 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) remove_memory_type_range(152, 0xa6fdb000, 0x1000, 0) remove_memory_type_range(117, 0xa6ffe000, 0x1000, 0) add_memory_type_range(153, 0xa6fec000, 0xc000, 0) remove_memory_type_range(153, 0xa6fec000, 0xc000, 0) ACPI: Forced DSDT copy: length 0x0B287 copied locally, original unmapped ACPI: Executed 1 blocks of module-level executable AML code add_memory_type_range(154, 0xa6fe8000, 0x2000, 0) add_memory_type_range(155, 0xa6fdd000, 0x1000, 0) add_memory_type_range(156, 0xa6fdc000, 0x1000, 0) ACPI: 4 ACPI AML tables successfully acquired and loaded add_memory_type_range(157, 0xa6fbd000, 0x1000, 0) add_memory_type_range(158, 0xa6fba000, 0x1000, 0) remove_memory_type_range(157, 0xa6fbd000, 0x1000, 0) add_memory_type_range(159, 0xa6fbd000, 0x1000, 0) remove_memory_type_range(159, 0xa6fbd000, 0x1000, 0) add_memory_type_range(160, 0xa6fbd000, 0x1000, 0) add_memory_type_range(161, 0xff708000, 0x1000, 0) add_memory_type_range(162, 0xff708000, 0x1000, 0) add_memory_type_range(163, 0xa6fb2000, 0x1000, 0) ACPI: Enabled 7 GPEs in block 00 to 3F add_memory_type_range(164, 0xa6ff9000, 0x1000, 0) found io-apic with address 0xfec00000, global interrupt base 0, apic-id 0 mapping io-apic 0 at physical address 0xfec00000 add_memory_type_range(165, 0xfec00000, 0x1000, 0) io-apic 0 has range 0-23, 24 entries, version 0x00170020, apic-id 0 setting ACPI interrupt model to APIC IRQ routing table with 12 entries address 0x16ffff; pin 0; GSI 16; pci 0:22 pin 1 func mask 1; bios irq: 7; gsi 16; config 0x06 address 0x1affff; pin 0; GSI 16; pci 0:26 pin 1 func mask 1; bios irq: 7; gsi 16; config 0x06 address 0x1bffff; pin 0; GSI 22; pci 0:27 pin 1 func mask 1; bios irq: 10; gsi 22; config 0x06 address 0x1cffff; pin 0; GSI 17; pci 0:28 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06 address 0x1cffff; pin 1; GSI 16; pci 0:28 pin 2 func mask 2; bios irq: 7; gsi 16; config 0x06 address 0x1cffff; pin 2; GSI 18; pci 0:28 pin 3 func mask 4; bios irq: 11; gsi 18; config 0x06 address 0x1dffff; pin 0; GSI 23; pci 0:29 pin 1 func mask 1; bios irq: 7; gsi 23; config 0x06 address 0x1fffff; pin 1; GSI 19; pci 0:31 pin 2 func mask 4; bios irq: 10; gsi 19; config 0x06 address 0x1fffff; pin 2; GSI 19; pci 0:31 pin 3 func mask 8; bios irq: 10; gsi 19; config 0x06 address 0x2ffff; pin 0; GSI 16; pci 0:2 pin 1 func mask 1; bios irq: 7; gsi 16; config 0x06 address 0xffff; pin 0; GSI 18; pci 4:0 pin 1 func mask 1; bios irq: 11; gsi 18; config 0x06 address 0xffff; pin 0; GSI 19; pci 9:0 pin 1 func mask 1; bios irq: 10; gsi 19; config 0x06 found interrupt override for bus 0, source irq 0, global irq 2, flags 0x00000000 found interrupt override for bus 0, source irq 9, global irq 9, flags 0x0000000d free_io_interrupt_vectors: freeing 16 vectors starting from 0 reserve_io_interrupt_vectors: reserved 24 vectors starting from 0 using io-apics for interrupt routing setting up apic for CPU 1: apic id 1, version 17170453 CPU 1: logical apic id: 0x2 setting up apic for CPU 2: apic id 2, version 17170453 setting up apic for CPU 3: apic id 3, version 17170453 CPU 2: logical apic id: 0x4 CPU 3: logical apic id: 0x8 x86_init_fpu: CPU has SSE... enabling FXSR and XMM. Last message repeated 2 times. add_memory_type_range(176, 0xfed1f000, 0x1000, 0) slab memory manager: created area 0x80801000 (177) initialize_commpage_syscall(): sysenter/sysexit supported allocate_commpage_entry(3, 5) -> 0x00000110 allocate_commpage_entry(4, 34) -> 0x00000118 allocate_commpage_entry(5, 74) -> 0x00000140 allocate_commpage_entry(6, 86) -> 0x00000190 allocate_commpage_entry(7, 97) -> 0x000001e8 publish device: node 0x8281cb90, path acpi/namespace, module bus_managers/acpi/namespace/device_v1 registering power button add_memory_type_range(237, 0xff708000, 0x1000, 0) remove_memory_type_range(237, 0xff708000, 0x1000, 0) add_memory_type_range(238, 0xff708000, 0x1000, 0) remove_memory_type_range(163, 0xa6fb2000, 0x1000, 0) add_memory_type_range(239, 0xa6fb2000, 0x1000, 0) publish device: node 0x82b6d3d0, path power/embedded_controller/0, module drivers/power/acpi_embedded_controller/device_v1 remove_memory_type_range(176, 0xfed1f000, 0x1000, 0) add_memory_type_range(248, 0xfed1f000, 0x1000, 0) remove_memory_type_range(161, 0xff708000, 0x1000, 0) add_memory_type_range(281, 0xff708000, 0x1000, 0) usb xhci: no devices found usb uhci: no devices found usb ohci: no devices found add_memory_type_range(645, 0xc2809000, 0x1000, 0) usb ehci -1: the host controller is bios owned, claiming ownership usb ehci -1: successfully took ownership of the host controller sitd entry size 64, itd entry size 128 usb ehci -1: successfully started the controller add_memory_type_range(650, 0xc2808000, 0x1000, 0) usb ehci -1: the host controller is bios owned, claiming ownership usb ehci -1: successfully took ownership of the host controller sitd entry size 64, itd entry size 128 usb ehci -1: successfully started the controller usb hub 2: port 0: new device connected usb hub 13: port 0: new device connected usb hub 13: port 2: new device connected usb hub 7: port 0: new device connected usb hub 56: port 1: new device connected remove_memory_type_range(238, 0xff708000, 0x1000, 0) add_memory_type_range(656, 0xff708000, 0x1000, 0) usb_disk: device reports a lun count of 1 usb_disk: vendor_identification "SMI " usb_disk: product_identification "USB DISK " usb_disk: product_revision_level "1100" get_boot_partitions(): boot volume message: KMessage: buffer: 0x8194a288 (size/capacity: 347/347), flags: 0xa field: "booted from image" (BOOL): false field: "partition offset" (LLNG): 32768 (0x8000) field: "packaged" (BOOL): true field: "boot method" (LONG): 0 (0x0) field: "boot drive number" (LLNG): 128 (0x80) field: "disk identifier" (RAWT): data at 0x8194a394, 79 bytes get_boot_partitions(): boot method type: 0 partitioning system: partitioning_systems/intel/extended/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1) intel: ep_std_ops(0x1) intel: ep_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error partitioning system: partitioning_systems/intel/map/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1) intel: pm_std_ops(0x1) intel: pm_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error partitioning system: partitioning_systems/efi_gpt/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/efi_gpt/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/devfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/packagefs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/packagefs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/rootfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/bfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error number of disk systems: 7 KDiskDeviceManager::_Scan(/dev/disk) ahci: generic AHCI controller found! vendor 0x8086, device 0x1e03 ahci: ahci_register_device ahci: ahci_init_driver ahci: ahci_sim_init_bus ahci: ahci_sim_init_bus: pciDevice 0x82bbfd40 ahci: AHCIController::Init 0:31:2 vendor 8086, device 1e03 ahci: PCI SATA capability found at offset 0xa8 ahci: satacr0 = 0x0010b012, satacr1 = 0x00000048 ahci: pcicmd old 0x0007 ahci: pcicmd new 0x0006 allocate_io_interrupt_vectors: allocated 1 vectors starting from 24 msi_allocate_vectors: allocated 1 vectors starting from 24 msi enabled: 0x0001 ahci: using MSI vector 24 ahci: registers at 0xc2807000, size 0x800 ahci: mapping physical address 0xc2807000 with 2048 bytes for AHCI HBA regs add_memory_type_range(672, 0xc2807000, 0x1000, 0) ahci: physical = 0xc2807000, virtual = 0x8199a000, offset = 0, phyadr = 0xc2807000, mapadr = 0x8199a000, size = 4096, area = 0x000002a0 ahci: cap: Interface Speed Support: generation 3 ahci: cap: Number of Command Slots: 32 (raw 0x1f) ahci: cap: Number of Ports: 6 (raw 0x5) ahci: cap: Supports Port Multiplier: no ahci: cap: Supports External SATA: no ahci: cap: Enclosure Management Supported: yes ahci: cap: FIS-based Switching Control: no ahci: cap: Supports Command List Override: yes ahci: cap: Supports Staggered Spin-up: no ahci: cap: Supports Mechanical Presence Switch: no ahci: cap: Supports 64-bit Addressing: yes ahci: cap: Supports Native Command Queuing: yes ahci: cap: Supports SNotification Register: no ahci: cap: Supports Command List Override: yes ahci: cap: Supports AHCI mode only: no ahci: cap2: DevSleep Entrance from Slumber Only: no ahci: cap2: Supports Aggressive Device Sleep Management: no ahci: cap2: Supports Device Sleep: no ahci: cap2: Automatic Partial to Slumber Transitions: yes ahci: cap2: NVMHCI Present: no ahci: cap2: BIOS/OS Handoff: no ahci: ghc: AHCI Enable: yes ahci: Ports Implemented Mask: 0x000023 Number of Available Ports: 3 ahci: AHCI Version 0001.03.00 Interrupt 24 ahci: AHCIPort::Init1 port 0 ahci: allocating 4096 bytes for AHCI port 0 ahci: area = 673, size = 4096, virt = 0x81d4c000, phy = 0xce77000 ahci: PRD table is at 0x81d4c580 ahci: AHCIPort::Init1 port 1 ahci: allocating 4096 bytes for AHCI port 1 ahci: area = 674, size = 4096, virt = 0x8199b000, phy = 0xce76000 ahci: PRD table is at 0x8199b580 ahci: AHCIPort::Init1 port 5 ahci: allocating 4096 bytes for AHCI port 5 ahci: area = 675, size = 4096, virt = 0x81d4d000, phy = 0xce75000 ahci: PRD table is at 0x81d4d580 ahci: AHCIPort::Init2 port 0 ahci: Enable: port 0 ahci: AHCIPort::SoftReset port 0 ahci: Disable: port 0 ahci: Enable: port 0 ahci: AHCIPort::PortReset port 0 ahci: Disable: port 0 ahci: AHCIPort::InterruptErrorHandler port 0, fCommandsActive 0x00000000, is 0x00400000, ci 0x00000000 ahci: ssts 0x00000000 ahci: sctl 0x00000301 ahci: serr 0x00010000 ahci: sact 0x00000000 ahci: PhyReady Change ahci: AHCIPort::InterruptErrorHandler port 0, fCommandsActive 0x00000000, is 0x00000040, ci 0x00000000 ahci: ssts 0x00000133 ahci: sctl 0x00000300 ahci: serr 0x04050000 ahci: sact 0x00000000 ahci: Port Connect Change ahci: Enable: port 0 ahci: Probe: port 0 link speed 6.0Gb/s ahci: device signature 0x00000101 (ATA) ahci: Port 0 state: ahci: ie 0x7dc0007f ahci: is 0x00000000 ahci: cmd 0x0000c017 ahci: ssts 0x00000133 ahci: sctl 0x00000300 ahci: serr 0x00000000 ahci: sact 0x00000000 ahci: tfd 0x00000150 ahci: Init2: port 0, device present ahci: AHCIPort::Init2 port 1 ahci: Enable: port 1 ahci: AHCIPort::SoftReset port 1 ahci: Disable: port 1 ahci: Enable: port 1 ahci: AHCIPort::PortReset port 1 ahci: Disable: port 1 ahci: AHCIPort::InterruptErrorHandler port 1, fCommandsActive 0x00000000, is 0x00400000, ci 0x00000000 ahci: ssts 0x00000000 ahci: sctl 0x00000301 ahci: serr 0x00010000 ahci: sact 0x00000000 ahci: PhyReady Change ahci: AHCIPort::InterruptErrorHandler port 1, fCommandsActive 0x00000000, is 0x00000040, ci 0x00000000 ahci: ssts 0x00000133 ahci: sctl 0x00000300 ahci: serr 0x04050000 ahci: sact 0x00000000 ahci: Port Connect Change ahci: Enable: port 1 ahci: Probe: port 1 link speed 6.0Gb/s ahci: device signature 0x00000101 (ATA) ahci: Port 1 state: ahci: ie 0x7dc0007f ahci: is 0x00000000 ahci: cmd 0x0000c017 ahci: ssts 0x00000133 ahci: sctl 0x00000300 ahci: serr 0x00000000 ahci: sact 0x00000000 ahci: tfd 0x00000150 ahci: Init2: port 1, device present ahci: AHCIPort::Init2 port 5 ahci: Enable: port 5 ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: AHCIPort::InterruptErrorHandler port 5, fCommandsActive 0x00000000, is 0x00400000, ci 0x00000000 ahci: ssts 0x00000000 ahci: sctl 0x00000301 ahci: serr 0x00010000 ahci: sact 0x00000000 ahci: PhyReady Change ahci: AHCIPort::InterruptErrorHandler port 5, fCommandsActive 0x00000000, is 0x00000040, ci 0x00000000 ahci: ssts 0x00000001 ahci: sctl 0x00000300 ahci: serr 0x04040000 ahci: sact 0x00000000 ahci: Port Connect Change ahci: AHCIPort::InterruptErrorHandler port 5, fCommandsActive 0x00000000, is 0x00000040, ci 0x00000000 ahci: ssts 0x00000113 ahci: sctl 0x00000300 ahci: serr 0x04050000 ahci: sact 0x00000000 ahci: Port Connect Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: device signature 0xeb140101 (ATAPI) ahci: Port 5 state: ahci: ie 0x7dc0007f ahci: is 0x00000000 ahci: cmd 0x0100c017 ahci: ssts 0x00000113 ahci: sctl 0x00000300 ahci: serr 0x00000000 ahci: sact 0x00000000 ahci: tfd 0x00000100 ahci: Init2: port 5, device present ahci: cookie = 0x8280aa80 ahci: ahci_path_inquiry, cookie 0x8280aa80 ahci: ahci_path_inquiry, cookie 0x8280aa80 ahci: ahci_scan_bus, cookie 0x8280aa80 ahci: AHCIPort::ScsiTestUnitReady port 0 ahci: AHCIPort::ScsiInquiry port 0 ahci: lba 1, lba48 1, fUse48BitCommands 1, sectors 268435455, sectors48 1953525168, size 1000204886016 ahci: model number: WDC WD10SPCX-22HWST0 ahci: serial number: WD-WX11A63E0941 ahci: firmware rev.: 01.01A01 ahci: sg_memcpy phyAddr 0x26941b4, size 96 ahci: ahci_get_restrictions, cookie 0x8280aa80 ahci: AHCIPort::ScsiGetRestrictions port 0: isATAPI 0, noAutoSense 0, maxBlocks 65536 publish device: node 0x82b8dbe0, path disk/scsi/0/0/0/raw, module drivers/disk/scsi/scsi_disk/device_v1 ahci: AHCIPort::ScsiTestUnitReady port 1 ahci: AHCIPort::ScsiInquiry port 1 ahci: lba 1, lba48 1, fUse48BitCommands 1, sectors 268435455, sectors48 500118192, size 256060514304 ahci: trim supported, 1 ranges blocks, reads are deterministic, random. ahci: model number: ADATA SX300 ahci: serial number: 2D1620001225 ahci: firmware rev.: 5.2.2 ahci: sg_memcpy phyAddr 0x26941b4, size 96 ahci: ahci_get_restrictions, cookie 0x8280aa80 ahci: AHCIPort::ScsiGetRestrictions port 1: isATAPI 0, noAutoSense 0, maxBlocks 65536 publish device: node 0x82b8daa0, path disk/scsi/0/1/0/raw, module drivers/disk/scsi/scsi_disk/device_v1 ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: ahci_get_restrictions, cookie 0x8280aa80 ahci: AHCIPort::ScsiGetRestrictions port 5: isATAPI 1, noAutoSense 1, maxBlocks 256 publish device: node 0x82b8bf40, path disk/scsi/0/5/0/raw, module drivers/disk/scsi/scsi_cd/device_v1 ata 0: controller doesn't support DMA, disabling ata 0: _DevicePresent: device selection failed for device 0 ata 0: _DevicePresent: device 1, presence 0 ata 0: deviceMask 0 ata 0: ignoring device 0 ata 0: ignoring device 1 ata 0 error: target device not present ata 0 error: target device not present ata 0 error: invalid target device Last message repeated 12 times. ata 1: controller doesn't support DMA, disabling ata 1: _DevicePresent: device selection failed for device 0 ata 1: _DevicePresent: device 1, presence 0 ata 1: deviceMask 0 ata 1: ignoring device 0 ata 1: ignoring device 1 ata 1 error: target device not present ata 1 error: target device not present ata 1 error: invalid target device Last message repeated 12 times. KDiskDeviceManager::_Scan(/dev/disk/scsi) KDiskDeviceManager::_Scan(/dev/disk/scsi/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/0/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/0/0/raw) found device: /dev/disk/scsi/0/0/0/raw ahci: AHCIPort::ScsiReadCapacity port 0 ahci: SectorSize 512, SectorCount 0x74706db0 ahci: sg_memcpy phyAddr 0x2694330, size 8 DMAResource@0x82809a80: low/high 0/100000000, max segment count 32, align 2, boundary 65536, max transfer 130560, max segment size 33554432 ahci: AHCIPort::ScsiReadCapacity port 0 ahci: SectorSize 512, SectorCount 0x74706db0 ahci: sg_memcpy phyAddr 0x2694220, size 8 ahci: ahci_ioctl, cookie 0x8280aa80 KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0/raw) found device: /dev/disk/scsi/0/1/0/raw ahci: AHCIPort::ScsiReadCapacity port 1 ahci: SectorSize 512, SectorCount 0x1dcf32b0 ahci: sg_memcpy phyAddr 0x2694330, size 8 DMAResource@0x82809900: low/high 0/100000000, max segment count 32, align 2, boundary 65536, max transfer 130560, max segment size 33554432 ahci: AHCIPort::ScsiReadCapacity port 1 ahci: SectorSize 512, SectorCount 0x1dcf32b0 ahci: sg_memcpy phyAddr 0x2694220, size 8 ahci: ahci_ioctl, cookie 0x8280aa80 KDiskDeviceManager::_Scan(/dev/disk/scsi/0/5) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/5/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/5/0/raw) found device: /dev/disk/scsi/0/5/0/raw ahci: AHCIPort::InterruptErrorHandler port 5, fCommandsActive 0x00000001, is 0x40000001, ci 0x00000001 ahci: ssts 0x00000113 ahci: sctl 0x00000300 ahci: serr 0x00000000 ahci: sact 0x00000000 ahci: Task File Error ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: AHCIPort::InterruptErrorHandler port 5, fCommandsActive 0x00000000, is 0x00400000, ci 0x00000000 ahci: ssts 0x00000000 ahci: sctl 0x00000301 ahci: serr 0x00010000 ahci: sact 0x00000000 ahci: PhyReady Change ahci: AHCIPort::InterruptErrorHandler port 5, fCommandsActive 0x00000000, is 0x00000040, ci 0x00000000 ahci: ssts 0x00000001 ahci: sctl 0x00000300 ahci: serr 0x04040000 ahci: sact 0x00000000 ahci: Port Connect Change ahci: AHCIPort::InterruptErrorHandler port 5, fCommandsActive 0x00000000, is 0x00000040, ci 0x00000000 ahci: ssts 0x00000113 ahci: sctl 0x00000300 ahci: serr 0x04050000 ahci: sact 0x00000000 ahci: Port Connect Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: device signature 0xeb140101 (ATAPI) ahci: sata_request::finish ATA command 0xa0 failed: status 0x51, error 0x20 ahci: sata_request::finish ATAPI packet 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (len 10) ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: ahci_ioctl, cookie 0x8280aa80 KDiskDeviceManager::_Scan(/dev/disk/usb) KDiskDeviceManager::_Scan(/dev/disk/usb/0) KDiskDeviceManager::_Scan(/dev/disk/usb/0/0) KDiskDeviceManager::_Scan(/dev/disk/usb/0/0/raw) found device: /dev/disk/usb/0/0/raw usb_disk: got device name "SMI USB DISK 1100": No error KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/0/0/raw) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 intel: ep_std_ops(0x2) intel: pm_std_ops(0x1) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 0: 0, 1000204886016, 512) returned: 0.81 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 scanning with: partitioning_systems/intel/map/v1 intel: pm_scan_partition(0, 0: 0, 1000204886016, 512) KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/0/0/0) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(0, 1024, 950339104768, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 4: 1024, 950339104768, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/0/0/1) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(0, 950339105792, 49865031680, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 5: 950339105792, 49865031680, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: 0.8 scanning with: file_systems/bfs/v1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/raw) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 1: 0, 256060514304, 512) intel: Found GPT signature, ignoring. returned: -1 trying: partitioning_systems/efi_gpt/v1 EFI header: EFI PART EFI revision: 10000 header size: 92 header CRC: bb1ab2e7 absolute block: 1 alternate block: 500118191 first usable block: 34 last usable block: 500118158 disk GUID: d5e78bfb-04f6-4caa-b48a-303a3e63d3a0 entries block: 2 entry size: 128 entry count: 128 entries CRC: bf0844d8 EFI header: EFI PART EFI revision: 10000 header size: 92 header CRC: 1c2c1f29 absolute block: 500118191 alternate block: 1 first usable block: 34 last usable block: 500118158 disk GUID: d5e78bfb-04f6-4caa-b48a-303a3e63d3a0 entries block: 500118159 entry size: 128 entry count: 128 entries CRC: bf0844d8 [ 0] partition type: c12a7328-f81f-11d2-ba4b-00a0c93ec93b unique id: 7db85ae3-ccc9-49d5-9f64-284df0986f99 start block: 40 end block: 409639 size: 199.999 MB attributes: 0 name: EFI System Partition [ 1] partition type: 48465300-0000-11aa-aa11-00306543ecac unique id: 8555be6d-20ff-4806-995e-b982616275d0 start block: 409640 end block: 333980839 size: 162876.562 MB attributes: 0 name: OSX [ 2] partition type: 426f6f74-0000-11aa-aa11-00306543ecac unique id: f1986d47-018b-420b-a964-a81232e70a13 start block: 333980840 end block: 335250375 size: 619.89 MB attributes: 2000000000000 name: Recovery HD [ 3] partition type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 unique id: 0c69b866-04b0-48f9-8b84-acd1b1ebdd03 start block: 335251456 end block: 434501455 size: 48461.913 MB attributes: 0 name: [ 4] partition type: 0657fd6d-a4ab-43c4-84e5-0933c84b4f4f unique id: bfe7be0a-c46e-4034-8209-37eb87b730d8 start block: 434501632 end block: 465340415 size: 15057.999 MB attributes: 0 name: returned: 0.959 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 scanning with: partitioning_systems/efi_gpt/v1 efi_gpt_scan_partition(cookie = 0x82bd5708) KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/0) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 6: 20480, 209715200, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/1) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(0, 209735680, 170788454400, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 7: 209735680, 170788454400, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/2) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(0, 170998190080, 650002432, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 8: 170998190080, 650002432, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/3) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(0, 171648745472, 50816000000, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 9: 171648745472, 50816000000, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/4) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(0, 222464835584, 15789457408, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 10: 222464835584, 15789457408, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/usb/0/0/raw) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 3: 0, 8054112256, 512) returned: 0.81 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 scanning with: partitioning_systems/intel/map/v1 intel: pm_scan_partition(0, 3: 0, 8054112256, 512) KDiskDeviceManager::_ScanPartition(/dev/disk/usb/0/0/0) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(0, 32768, 8053063680, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 11: 32768, 8053063680, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: 0.8 scanning with: file_systems/bfs/v1 device 0: /dev/disk/scsi/0/0/0/raw media status: No error device flags: 2 offset: 0 size: 1000204886016 (953869.71 MB) content size: 1000204886016 block size: 512 child count: 2 index: -1 status: 0 flags: 5 volume: -1 disk system: partitioning_systems/intel/map/v1 name: WDC WD10 SPCX-22HWST0 content name: type: ahci: AHCIPort::SoftReset port 5 content type: Intel Partition Map ahci: Disable: port 5 params: ahci: Enable: port 5 content params: ahci: AHCIPort::PortReset port 5 partition 4: /dev/disk/scsi/0/0/0/0 ahci: Disable: port 5 offset: 1024 ahci: PhyReady Change size: 950339104768 (906313.996 MB) content size: 0 block size: 512 child count: 0 index: 0 status: 2 flags: 0 volume: -1 disk system: name: content name: type: MacOS X HFS/HFS+ content type: params: type = 175 ; active = 0 content params: partition 5: /dev/disk/scsi/0/0/0/1 offset: 950339105792 size: 49865031680 (47555 MB) content size: 49865031680 block size: 2048 child count: 0 ahci: Port Connect Change index: 1 status: 0 flags: 2 volume: -1 disk system: file_systems/bfs/v1 name: content name: Haiku type: Be File System content type: Be File System params: type = 235 ; active = 1 content params: device 1: /dev/disk/scsi/0/1/0/raw media status: No error device flags: 2 offset: 0 size: 256060514304 (244198.335 MB) content size: 256060514304 block size: 512 ahci: Port Connect Change child count: 5 index: -1 status: 0 flags: 5 volume: -1 disk system: partitioning_systems/efi_gpt/v1 name: ADATA SX 300 content name: type: content type: GUID Partition Map params: content params: partition 6: /dev/disk/scsi/0/1/0/0 offset: 20480 size: 209715200 (200 MB) content size: 0 block size: 512 child count: 0 index: 0 status: 2 flags: 0 volume: -1 disk system: name: EFI System Partition content name: type: EFI system data content type: params: content params: partition 7: /dev/disk/scsi/0/1/0/1 offset: 209735680 size: 170788454400 (162876.562 MB) content size: 0 block size: 512 child count: 0 index: 1 status: 2 flags: 0 volume: -1 disk system: name: OSX content name: type: Apple data (HFS+) content type: params: content params: partition 8: /dev/disk/scsi/0/1/0/2 offset: 170998190080 size: 650002432 (619.89 MB) content size: 0 block size: 512 child count: 0 index: 2 status: 2 flags: 0 volume: -1 disk system: name: Recovery HD content name: type: Apple boot content type: params: content params: partition 9: /dev/disk/scsi/0/1/0/3 offset: 171648745472 size: 50816000000 (48461.914 MB) content size: 0 block size: 512 child count: 0 index: 3 status: 2 flags: 0 volume: -1 disk system: name: content name: type: Windows data content type: params: content params: partition 10: /dev/disk/scsi/0/1/0/4 offset: 222464835584 size: 15789457408 (15058 MB) content size: 0 block size: 512 child count: 0 index: 4 status: 2 flags: 0 volume: -1 disk system: name: content name: type: Linux swap content type: params: content params: device 2: /dev/disk/scsi/0/5/0/raw media status: No media present device flags: 5 device 3: /dev/disk/usb/0/0/raw media status: No error device flags: 3 offset: 0 size: 8054112256 (7681 MB) content size: 8054112256 block size: 512 child count: 1 index: -1 status: 0 flags: 5 volume: -1 disk system: partitioning_systems/intel/map/v1 name: SMI USB DISK 1100 content name: type: content type: Intel Partition Map params: content params: partition 11: /dev/disk/usb/0/0/0 offset: 32768 size: 8053063680 (7680 MB) content size: 8053063680 block size: 2048 child count: 0 index: 0 status: 0 flags: 2 volume: -1 disk system: file_systems/bfs/v1 name: content name: Haiku type: Be File System content type: Be File System params: type = 235 ; active = 1 content params: Identified boot partition by partition offset. ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s bfs: mounted "Haiku" (root node at 524288, device = /dev/disk/usb/0/0/0) Mounted boot partition: /dev/disk/usb/0/0/0 packagefs [3953388: 18] Adding packages from "/boot/system/packages" packagefs [3956961: 18] Failed to open packages activation file: No such file or directory packagefs [3957106: 18] Loading packages from activation file failed. Loading all packages in packages directory. slab memory manager: created area 0xde001000 (762) slab memory manager: created area 0xdf001000 (907) ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s packagefs [5499144: 18] StringPool usage: packagefs [5499221: 18] total unique strings: 22925, 287293 bytes, overhead: 343875 bytes packagefs [5499377: 18] total strings with dups: 123188, 1307450 bytes packagefs [5499498: 18] unshared strings: 1144 packagefs [5499593: 18] bytes saved: 676282 packagefs [5506876: 18] Adding packages from "/boot/home/config/packages" packagefs [5508459: 18] Failed to open packages activation file: No such file or directory packagefs [5508604: 18] Loading packages from activation file failed. Loading all packages in packages directory. packagefs [5514469: 18] StringPool usage: packagefs [5514542: 18] total unique strings: 22925, 287293 bytes, overhead: 343875 bytes packagefs [5514702: 18] total strings with dups: 123199, 1307515 bytes packagefs [5514822: 18] unshared strings: 1141 packagefs [5514918: 18] bytes saved: 676347 module: Search for file_cache/launch_speedup/v1 failed. partitioning system: partitioning_systems/session/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/nfs4/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/nfs4/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/ext2/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/ext2/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/btrfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/btrfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/bindfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/bindfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/attribute_overlay/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/attribute_overlay/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/write_overlay/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/write_overlay/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/cdda/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/cdda/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/nfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/nfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/iso9660/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/udf/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/udf/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/reiserfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/reiserfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/fat/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1) dos_std_ops() dos_std_ops() KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/exfat/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/exfat/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/log_overlay/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/log_overlay/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/ntfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/ntfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/0/0/0) trying: partitioning_systems/session/v1 con_init: trying module console/frame_buffer/v1 loaded driver /boot/system/add-ons/kernel/drivers/dev/console usb_modeswitch: init_hardware() usb_modeswitch: init_driver() usb_modeswitch: trying module bus_managers/usb/v3 usb_modeswitch: publish_devices() usb_modeswitch: uninit_driver() loaded driver /boot/system/add-ons/kernel/drivers/dev/usb_modeswitch loaded driver /boot/system/add-ons/kernel/drivers/dev/null loaded driver /boot/system/add-ons/kernel/drivers/dev/zero loaded driver /boot/system/add-ons/kernel/drivers/dev/tty loaded driver /boot/system/add-ons/kernel/drivers/dev/dprintf returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd9f0) returned: -1 trying: file_systems/udf/v1 udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 dos_std_ops() trying: file_systems/fat/v1 returned: -1 dos_std_ops() trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/0/0/1) trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd9a0) returned: -1 trying: file_systems/udf/v1 read_pos(pos:1946294488694784, len:2048) failed with: 0xffffffff udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 dos_std_ops() trying: file_systems/fat/v1 returned: -1 dos_std_ops() trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/0) trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd9d0) returned: -1 trying: file_systems/udf/v1 udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 dos_std_ops() trying: file_systems/fat/v1 returned: 0.8 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 scanning with: file_systems/fat/v1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/1) trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd990) returned: -1 trying: file_systems/udf/v1 udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/2) trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bda00) returned: -1 trying: file_systems/udf/v1 read_pos(pos:87551073329152, len:512) failed with: 0xffffffff udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/3) trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 returned: 0.8 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd950) returned: -1 trying: file_systems/udf/v1 read_pos(pos:87884157689856, len:512) failed with: 0xffffffff udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 scanning with: file_systems/ext2/v1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/4) trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd930) returned: -1 trying: file_systems/udf/v1 read_pos(pos:113901995827200, len:512) failed with: 0xffffffff udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_Scan(/dev/disk) KDiskDeviceManager::_Scan(/dev/disk/floppy) config_manager: driver module: init driver_get_next_device_info(bus = 0, cookie = 0) loaded driver /boot/system/add-ons/kernel/drivers/dev/disk/floppy/pc_floppy KDiskDeviceManager::_Scan(/dev/disk/scsi) KDiskDeviceManager::_Scan(/dev/disk/scsi/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/0/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/0/0/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/0/0/1) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/0/0/raw) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0/1) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0/2) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0/3) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0/4) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/1/0/raw) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/5) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/5/0) KDiskDeviceManager::_Scan(/dev/disk/scsi/0/5/0/raw) KDiskDeviceManager::_Scan(/dev/disk/usb) loaded driver /boot/system/add-ons/kernel/drivers/dev/disk/usb/usb_disk loaded driver /boot/system/add-ons/kernel/drivers/dev/disk/usb/usb_floppy KDiskDeviceManager::_Scan(/dev/disk/usb/0) KDiskDeviceManager::_Scan(/dev/disk/usb/0/0) KDiskDeviceManager::_Scan(/dev/disk/usb/0/0/0) KDiskDeviceManager::_Scan(/dev/disk/usb/0/0/raw) KDiskDeviceManager::_Scan(/dev/disk/virtual) KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/0/0/0) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(8, 1024, 950339104768, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(8, 4: 1024, 950339104768, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd900) returned: -1 trying: file_systems/udf/v1 udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/0/0/1) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(8, 950339105792, 49865031680, 2048) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(8, 5: 950339105792, 49865031680, 2048) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: 0.8 trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd8b0) returned: -1 trying: file_systems/udf/v1 read_pos(pos:1946294488694784, len:2048) failed with: 0xffffffff udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/0) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(8, 6: 20480, 209715200, 512) ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd8c0) returned: -1 trying: file_systems/udf/v1 udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: 0.8 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/1) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(8, 209735680, 170788454400, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(8, 7: 209735680, 170788454400, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd8d0) returned: -1 trying: file_systems/udf/v1 udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/2) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(8, 170998190080, 650002432, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(8, 8: 170998190080, 650002432, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd8a0) returned: -1 trying: file_systems/udf/v1 read_pos(pos:87551073329152, len:512) failed with: 0xffffffff udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/3) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(8, 171648745472, 50816000000, 4096) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(8, 9: 171648745472, 50816000000, 4096) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 returned: 0.8 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd890) returned: -1 trying: file_systems/udf/v1 read_pos(pos:703073261518848, len:4096) failed with: 0xffffffff udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/scsi/0/1/0/4) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 intel: ep_identify_partition(8, 222464835584, 15789457408, 512) returned: -1 intel: ep_std_ops(0x2) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(8, 10: 222464835584, 15789457408, 512) returned: -1 trying: partitioning_systems/efi_gpt/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/nfs4/v1 returned: -1 trying: file_systems/ext2/v1 ext2: invalid superblock! returned: -1 trying: file_systems/btrfs/v1 btrfs: invalid superblock! returned: -1 trying: file_systems/bindfs/v1 returned: -1 trying: file_systems/attribute_overlay/v1 returned: -1 trying: file_systems/write_overlay/v1 returned: -1 trying: file_systems/cdda/v1 raw_command: ahci: AHCIPort::ScsiExecuteRequest port 1 unsupported request opcode 0x43 returned: -1 trying: file_systems/nfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(8, 0xde4bd8e0) returned: -1 trying: file_systems/udf/v1 read_pos(pos:113901995827200, len:512) failed with: 0xffffffff udf_recognize: Invalid sequence. status = -1 returned: -1 trying: file_systems/reiserfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 trying: file_systems/exfat/v1 exfat: invalid superblock! returned: -1 trying: file_systems/log_overlay/v1 returned: -1 trying: file_systems/ntfs/v1 fs_identify_partition: boot signature NTFS doesn't match returned: -1 allocate_commpage_entry(8, 20) -> 0x00000250 using Intel P-States: min 8, max 18, boost 27 found cpufreq module: power/cpufreq/intel_pstates/v1 using Intel C-States: C0, C1, C2, C3, C4 found cpuidle module: power/cpuidle/intel_cstates/v1 add_memory_type_range(-1, 0x100000, 0x1ff00000, 6) set MTRRs to: mtrr: 0: base: 0x80000000, size: 0x80000000, type: 0 add_memory_type_range(-1, 0x20200000, 0x1fe04000, 6) set MTRRs to: mtrr: 0: base: 0x80000000, size: 0x80000000, type: 0 add_memory_type_range(-1, 0x40005000, 0x601ab000, 6) set MTRRs to: mtrr: 0: base: 0xa4000000, size: 0x4000000, type: 0 mtrr: 1: base: 0xb0000000, size: 0x10000000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 add_memory_type_range(-1, 0xa15b0000, 0x540f000, 6) set MTRRs to: mtrr: 0: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 1: base: 0xb0000000, size: 0x10000000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 add_memory_type_range(-1, 0x100000000, 0x1cf600000, 6) set MTRRs to: mtrr: 0: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 1: base: 0xb0000000, size: 0x10000000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 kernel debugger extension "debugger/invalidate_on_exit/v1": loaded kernel debugger extension "debugger/hangman/v1": loaded kernel debugger extension "debugger/usb_keyboard/v1": loaded kernel debugger extension "debugger/run_on_exit/v1": loaded kernel debugger extension "debugger/disasm/v1": loaded add_memory_type_range(90, 0xb0000000, 0x408000, 1) set MTRRs to: mtrr: 0: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 1: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 2: base: 0xb0000000, size: 0x10000000, type: 1 publish device: node 0xde4f15c8, path random, module bus_managers/random/device_v1 publish device: node 0xde4f15c8, path urandom, module bus_managers/random/device_v1 publish device: node 0xde4f1488, path power/acpi_battery/0, module drivers/power/acpi_battery/device_v1 publish device: node 0xde4f1438, path power/button/sleep, module drivers/power/acpi_button/device_v1 publish device: node 0xde4f13e8, path power/button/power, module drivers/power/acpi_button/device_v1 publish device: node 0xde4f1398, path power/button/power_fixed, module drivers/power/acpi_button/device_v1 ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s REG: Failed to open shadow passwd DB file "/etc/shadow": No such file or directory package_daemon [7633658: 531] root at "/boot" (device: 3, node: 524288) registered package_daemon [7633808: 531] volume at "/boot/system" registered package_daemon [7633969: 531] volume at "/boot/home/config" registered register_domain(9, unix) unregister_domain(0x808717c0, 9, unix) register_domain(5, internet6) unregister_domain(0xde4eca40, 5, internet6) register_domain(5, internet6) unregister_domain(0xde0bf200, 5, internet6) register_domain(1, internet) unregister_domain(0xde0bf200, 1, internet) register_domain(5, internet6) unregister_domain(0x8085c200, 5, internet6) register_domain(5, internet6) unregister_domain(0x80868500, 5, internet6) register_domain(4, link) unregister_domain(0xde530b40, 4, link) register_domain(9, unix) unregister_domain(0xde530ec0, 9, unix) register_domain(5, internet6) unregister_domain(0xde4ec040, 5, internet6) register_domain(5, internet6) unregister_domain(0xde2f9380, 5, internet6) register_domain(1, internet) unregister_domain(0xde2f9380, 1, internet) register_domain(5, internet6) unregister_domain(0xde4f5380, 5, internet6) register_domain(5, internet6) unregister_domain(0xde4f5380, 5, internet6) register_domain(1, internet) unregister_domain(0xde4f5340, 1, internet) register_domain(9, unix) unregister_domain(0xde530b40, 9, unix) register_domain(5, internet6) unregister_domain(0x8085c0c0, 5, internet6) register_domain(5, internet6) unregister_domain(0xde530b40, 5, internet6) register_domain(1, internet) unregister_domain(0xde530b40, 1, internet) register_domain(5, internet6) unregister_domain(0xde4eca80, 5, internet6) register_domain(5, internet6) unregister_domain(0xde4eca80, 5, internet6) register_domain(1, internet) unregister_domain(0x808717c0, 1, internet) register_domain(9, unix) unregister_domain(0xde4f5e00, 9, unix) register_domain(5, internet6) unregister_domain(0x80e93040, 5, internet6) register_domain(5, internet6) unregister_domain(0xde4f5e00, 5, internet6) register_domain(1, internet) unregister_domain(0xde4f5e00, 1, internet) register_domain(5, internet6) unregister_domain(0x80e93000, 5, internet6) register_domain(5, internet6) unregister_domain(0x80e93000, 5, internet6) register_domain(5, internet6) unregister_domain(0x80876680, 5, internet6) register_domain(9, unix) unregister_domain(0xde4ece00, 9, unix) register_domain(5, internet6) unregister_domain(0xde4ec2c0, 5, internet6) register_domain(5, internet6) unregister_domain(0xde4ec280, 5, internet6) register_domain(1, internet) unregister_domain(0xde4ec280, 1, internet) register_domain(5, internet6) unregister_domain(0x80e90e00, 5, internet6) register_domain(5, internet6) unregister_domain(0x80e90e00, 5, internet6) register_domain(1, internet) unregister_domain(0xde4ec740, 1, internet) register_domain(9, unix) unregister_domain(0xde4f5340, 9, unix) register_domain(5, internet6) unregister_domain(0x808717c0, 5, internet6) register_domain(5, internet6) unregister_domain(0xde4f5340, 5, internet6) register_domain(1, internet) unregister_domain(0xde4f5340, 1, internet) register_domain(5, internet6) unregister_domain(0x80e93000, 5, internet6) register_domain(5, internet6) unregister_domain(0x80e93000, 5, internet6) register_domain(1, internet) register_domain(5, internet6) vesa: init_hardware() vesa: init_driver() vesa: publish_devices() vesa: find_device() loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/vesa intel_extreme: CALLED status_t init_hardware() intel_extreme: CALLED status_t init_driver() AGP: bus manager init AGP: found 0 AGP devices intel_extreme: (0) IvyBridge Mobile GT2, revision = 0x9 intel_extreme: CALLED const char ** publish_devices() intel_extreme: CALLED struct device_hooks * find_device(const char *) loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/intel_extreme S3: init_hardware() - no supported devices radeon_hd: init_hardware ati: init_hardware() - no supported devices devfs: "intel_810" api_version missing i810: init_hardware() - no supported devices 3dfx: init_hardware() - no supported devices [broadcom570x] (bge) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1,0x2) add_memory_type_range(4201, 0xc2700000, 0x20000, 0) set MTRRs to: mtrr: 0: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 1: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 2: base: 0xb0000000, size: 0x10000000, type: 1 [broadcom570x] (bge) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1,0x6) [broadcom570x] (bge) CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E [broadcom570x] (bge) Disabling fastboot package_daemon [7949843: 549] Failed to open packages activation file: No such file or directory package_daemon [7949984: 549] Failed to get activated packages info from activated packages file. Assuming all package files in package directory are activated. package_daemon [7950252: 549] latest volume state: package_daemon [7950331: 549] active package: "ffmpeg_x86_devel-2.8.1-1-x86_gcc2.hpkg" package_daemon [7950455: 549] active package: "cdrtools-3.02~a06-1-x86_gcc2.hpkg" package_daemon [7950572: 549] active package: "vision-0.9.7.r949-2-x86_gcc2.hpkg" package_daemon [7950688: 549] active package: "sed-4.2.1-6-x86_gcc2.hpkg" package_daemon [7950793: 549] active package: "netcat-1.10-1-x86_gcc2.hpkg" package_daemon [7950900: 549] active package: "libxml2_x86-2.9.2-1-x86_gcc2.hpkg" package_daemon [7951017: 549] active package: "libedit-2015_03_21_3.1-2-x86_gcc2.hpkg" package_daemon [7951138: 549] active package: "haiku_devel-r1~alpha4_pm_hrev50095-1-x86_gcc2.hpkg" package_daemon [7951279: 549] active package: "git-2.7.0-2-x86_gcc2.hpkg" package_daemon [7951385: 549] active package: "findutils-4.4.2-1-x86_gcc2.hpkg" package_daemon [7951497: 549] active package: "coreutils-8.24-1-x86_gcc2.hpkg" package_daemon [7951609: 549] active package: "vl_gothic-20141206-1-any.hpkg" package_daemon [7951720: 549] active package: "sharutils-4.14-1-x86_gcc2.hpkg" package_daemon [7951831: 549] active package: "openssh-7.1p1-4-x86_gcc2.hpkg" package_daemon [7951942: 549] active package: "libxslt_x86-1.1.28-5-x86_gcc2.hpkg" package_daemon [7952059: 549] active package: "libpng16_x86-1.6.20-1-x86_gcc2.hpkg" package_daemon [7952178: 549] active package: "libexecinfo_x86-1.1-1-x86_gcc2.hpkg" package_daemon [7952295: 549] active package: "haiku_loader-r1~alpha4_pm_hrev50095-1-x86_gcc2.hpkg" package_daemon [7952434: 549] active package: "git_arch-2.7.0-2-x86_gcc2.hpkg" package_daemon [7952546: 549] active package: "flex-2.5.39-1-x86_gcc2.hpkg" package_daemon [7952654: 549] active package: "ctags-5.8-3-x86_gcc2.hpkg" package_daemon [7952760: 549] active package: "webpositive_x86-r1~alpha4_pm_hrev50095-1-x86_gcc2.hpkg" package_daemon [7952903: 549] active package: "speex-1.2~rc1-2-x86_gcc2.hpkg" package_daemon [7953014: 549] active package: "openssl-1.0.2e-1-x86_gcc2.hpkg" package_daemon [7953126: 549] active package: "m4-1.4.16-5-x86_gcc2.hpkg" package_daemon [7953232: 549] active package: "libpng16_x86_devel-1.6.20-1-x86_gcc2.hpkg" package_daemon [7953358: 549] active package: "libffi-3.0.13-2-x86_gcc2.hpkg" package_daemon [7953470: 549] active package: "haiku_x86-r1~alpha4_pm_hrev50095-1-x86_gcc2.hpkg" package_daemon [7953606: 549] active package: "git_cvs-2.7.0-2-x86_gcc2.hpkg" package_daemon [7953716: 549] active package: "freetype-2.6-1-x86_gcc2.hpkg" package_daemon [7953825: 549] active package: "curl-7.45.0-2-x86_gcc2.hpkg" package_daemon [7953933: 549] active package: "wget-1.17.1-1-x86_gcc2.hpkg" package_daemon [7954041: 549] active package: "speex_x86-1.2~rc1-2-x86_gcc2.hpkg" package_daemon [7954157: 549] active package: "openssl_devel-1.0.2e-1-x86_gcc2.hpkg" package_daemon [7954277: 549] active package: "make-3.82-5-x86_gcc2.hpkg" package_daemon [7954383: 549] active package: "libsolv-0.3.0_haiku_2014_12_22-1-x86_gcc2.hpkg" package_daemon [7954516: 549] active package: "libicns-0.8.1-3-x86_gcc2.hpkg" package_daemon [7954627: 549] active package: "haiku_x86_devel-r1~alpha4_pm_hrev50095-1-x86_gcc2.hpkg" package_daemon [7954770: 549] active package: "git_daemon-2.7.0-2-x86_gcc2.hpkg" package_daemon [7954884: 549] active package: "freetype_devel-2.6-1-x86_gcc2.hpkg" package_daemon [7955001: 549] active package: "curl_devel-7.45.0-2-x86_gcc2.hpkg" package_daemon [7955117: 549] active package: "autoconf-2.69-5-x86_gcc2.hpkg" package_daemon [7955227: 549] active package: "which-2.21-1-x86_gcc2.hpkg" package_daemon [7955333: 549] active package: "openssl_x86-1.0.2e-1-x86_gcc2.hpkg" package_daemon [7955450: 549] active package: "makefile_engine-r1~alpha4_pm_hrev50095-1-any.hpkg" package_daemon [7955587: 549] active package: "libsolv_x86-0.3.0_haiku_2014_12_22-1-x86_gcc2.hpkg" package_daemon [7955726: 549] active package: "libicns_x86-0.8.1-3-x86_gcc2.hpkg" package_daemon [7955842: 549] active package: "haikuwebkit_x86-1.5.2-1-x86_gcc2.hpkg" package_daemon [7955963: 549] active package: "git_email-2.7.0-2-x86_gcc2.hpkg" package_daemon [7956076: 549] active package: "freetype_x86-2.6-1-x86_gcc2.hpkg" package_daemon [7956196: 549] active package: "curl_x86-7.45.0-2-x86_gcc2.hpkg" package_daemon [7956309: 549] active package: "automake-1.15.0-1-x86_gcc2.hpkg" package_daemon [7956423: 549] active package: "wpa_supplicant-2.0-4-x86_gcc2.hpkg" package_daemon [7956540: 549] active package: "openssl_x86_devel-1.0.2e-1-x86_gcc2.hpkg" package_daemon [7956665: 549] active package: "man-1.6g-4-x86_gcc2.hpkg" package_daemon [7956769: 549] active package: "libtheora-1.1.1-2-x86_gcc2.hpkg" package_daemon [7956882: 549] active package: "libiconv-1.13.1-6-x86_gcc2.hpkg" package_daemon [7956996: 549] active package: "icu-56.1-1-x86_gcc2.hpkg" package_daemon [7957100: 549] active package: "git_svn-2.7.0-2-x86_gcc2.hpkg" package_daemon [7957211: 549] active package: "freetype_x86_devel-2.6-1-x86_gcc2.hpkg" package_daemon [7957333: 549] active package: "curl_x86_devel-7.45.0-2-x86_gcc2.hpkg" package_daemon [7957454: 549] active package: "bash-4.3.42-1-x86_gcc2.hpkg" package_daemon [7957563: 549] active package: "xz_utils_x86-5.0.8-2-x86_gcc2.hpkg" package_daemon [7957680: 549] active package: "speex_x86_devel-1.2~rc1-2-x86_gcc2.hpkg" package_daemon [7957804: 549] active package: "p7zip-9.20.1-4-x86_gcc2.hpkg" package_daemon [7957914: 549] active package: "mesa-7.9.2-10-x86_gcc2.hpkg" package_daemon [7958021: 549] active package: "libtheora_x86-1.1.1-2-x86_gcc2.hpkg" package_daemon [7958140: 549] active package: "libmodplug_x86-0.8.8.4-2-x86_gcc2.hpkg" package_daemon [7958263: 549] active package: "icu_x86-56.1-1-x86_gcc2.hpkg" package_daemon [7958372: 549] active package: "glu-9.0.0-2-x86_gcc2.hpkg" package_daemon [7958477: 549] active package: "gawk-4.1.0-2-x86_gcc2.hpkg" package_daemon [7958584: 549] active package: "cvsps_x86-2.2b1-1-x86_gcc2.hpkg" package_daemon [7958697: 549] active package: "binutils-2.17_2013_04_21-2-x86_gcc2.hpkg" package_daemon [7958823: 549] active package: "zip-3.0-2-x86_gcc2.hpkg" package_daemon [7958925: 549] active package: "sqlite-3.8.11.1-1-x86_gcc2.hpkg" package_daemon [7959039: 549] active package: "patch-2.7.5-1-x86_gcc2.hpkg" package_daemon [7959147: 549] active package: "mesa_devel-7.9.2-10-x86_gcc2.hpkg" package_daemon [7959264: 549] active package: "libtool-2.4.2-1-x86_gcc2.hpkg" package_daemon [7959375: 549] active package: "libogg-1.3.0-2-x86_gcc2.hpkg" package_daemon [7959485: 549] active package: "jam-2.5_2012_10_12-2-x86_gcc2.hpkg" package_daemon [7959603: 549] active package: "glu_devel-9.0.0-2-x86_gcc2.hpkg" package_daemon [7959716: 549] active package: "gcc-2.95.3_2014_10_14-3-x86_gcc2.hpkg" package_daemon [7959836: 549] active package: "dejavu-2.34-2-any.hpkg" package_daemon [7959937: 549] active package: "binutils_x86-2.25_12015_07_31-1-x86_gcc2.hpkg" package_daemon [7960068: 549] active package: "zlib-1.2.8-4-x86_gcc2.hpkg" package_daemon [7960175: 549] active package: "sqlite_x86-3.8.11.1-1-x86_gcc2.hpkg" package_daemon [7960294: 549] active package: "pe-2.4.5-2-x86_gcc2.hpkg" package_daemon [7960398: 549] active package: "mesa_swrast-7.9.2-10-x86_gcc2.hpkg" package_daemon [7960516: 549] active package: "libtool_libltdl-2.4.2-1-x86_gcc2.hpkg" package_daemon [7960639: 549] active package: "libogg_x86-1.3.0-2-x86_gcc2.hpkg" package_daemon [7960754: 549] active package: "jasper-1.900.1-4-x86_gcc2.hpkg" package_daemon [7960865: 549] active package: "glu_x86-9.0.0-4-x86_gcc2.hpkg" package_daemon [7960976: 549] active package: "gcc_x86-4.8.5_2015_07_11-2-x86_gcc2.hpkg" package_daemon [7961101: 549] active package: "diffutils-3.3-2-x86_gcc2.hpkg" package_daemon [7961211: 549] active package: "bison-2.4.3-6-x86_gcc2.hpkg" package_daemon [7961319: 549] active package: "zlib_devel-1.2.8-4-x86_gcc2.hpkg" package_daemon [7961434: 549] active package: "tar-1.26-6-x86_gcc2.hpkg" package_daemon [7961538: 549] active package: "perl-5.18.2-2-x86_gcc2.hpkg" package_daemon [7961646: 549] active package: "mesa_x86-10.1.0-2-x86_gcc2.hpkg" package_daemon [7961758: 549] active package: "libvorbis-1.3.5-1-x86_gcc2.hpkg" package_daemon [7961871: 549] active package: "libpcap-1.7.4-1-x86_gcc2.hpkg" package_daemon [7961982: 549] active package: "jasper_x86-1.900.1-4-x86_gcc2.hpkg" package_daemon [7962099: 549] active package: "glu_x86_devel-9.0.0-4-x86_gcc2.hpkg" package_daemon [7962218: 549] active package: "expat-2.1.0-1-x86_gcc2.hpkg" package_daemon [7962325: 549] active package: "bzip2-1.0.6-5-x86_gcc2.hpkg" package_daemon [7962432: 549] active package: "zlib_x86-1.2.8-4-x86_gcc2.hpkg" package_daemon [7962544: 549] active package: "tcpdump-4.7.4-2-x86_gcc2.hpkg" package_daemon [7962655: 549] active package: "pkgconfig-0.29-1-x86_gcc2.hpkg" package_daemon [7962767: 549] active package: "mkdepend-1.7-3-x86_gcc2.hpkg" package_daemon [7962877: 549] active package: "libvorbis_x86-1.3.5-2-x86_gcc2.hpkg" package_daemon [7962996: 549] active package: "libpcre-8.21-5-x86_gcc2.hpkg" package_daemon [7963106: 549] active package: "jpeg-9-3-x86_gcc2.hpkg" package_daemon [7963207: 549] active package: "grep-2.20-1-x86_gcc2.hpkg" package_daemon [7963313: 549] active package: "expat_x86-2.1.0-1-x86_gcc2.hpkg" package_daemon [7963426: 549] active package: "bzip2_devel-1.0.6-5-x86_gcc2.hpkg" package_daemon [7963542: 549] active package: "zlib_x86_devel-1.2.8-4-x86_gcc2.hpkg" package_daemon [7963661: 549] active package: "texinfo-4.13a-7-x86_gcc2.hpkg" package_daemon [7963772: 549] active package: "python-2.7.11-1-x86_gcc2.hpkg" package_daemon [7963883: 549] active package: "nano-2.4.2-1-x86_gcc2.hpkg" package_daemon [7963990: 549] active package: "libvpx-1.0.0-2-x86_gcc2.hpkg" package_daemon [7964099: 549] active package: "libpng-1.5.25-1-x86_gcc2.hpkg" package_daemon [7964210: 549] active package: "jpeg_devel-9-3-x86_gcc2.hpkg" package_daemon [7964318: 549] active package: "groff-1.20.1-3-x86_gcc2.hpkg" package_daemon [7964428: 549] active package: "gcc_x86_syslibs-4.8.5_2015_07_11-2-x86_gcc2.hpkg" package_daemon [7964562: 549] active package: "ffmpeg-0.10.14-3-x86_gcc2.hpkg" package_daemon [7964674: 549] active package: "bzip2_x86-1.0.6-5-x86_gcc2.hpkg" package_daemon [7964788: 549] active package: "tiff4-4.0.6-1-x86_gcc2.hpkg" package_daemon [7964896: 549] active package: "qrencode-3.3.0-1-x86_gcc2.hpkg" package_daemon [7965009: 549] active package: "nasm-2.11.08-1-x86_gcc2.hpkg" package_daemon [7965118: 549] active package: "libvpx_x86-1.0.0-2-x86_gcc2.hpkg" package_daemon [7965232: 549] active package: "libpng16-1.6.20-1-x86_gcc2.hpkg" package_daemon [7965346: 549] active package: "jpeg_x86-9-3-x86_gcc2.hpkg" package_daemon [7965453: 549] active package: "gutenprint-5.2.11-1-x86_gcc2.hpkg" package_daemon [7965570: 549] active package: "gettext_libintl-0.18.1.1-6-x86_gcc2.hpkg" package_daemon [7965695: 549] active package: "ffmpeg_devel-0.10.14-3-x86_gcc2.hpkg" package_daemon [7965815: 549] active package: "bzip2_x86_devel-1.0.6-5-x86_gcc2.hpkg" package_daemon [7965937: 549] active package: "tiff4_x86-4.0.6-1-x86_gcc2.hpkg" package_daemon [7966050: 549] active package: "readline-6.3.8-1-x86_gcc2.hpkg" package_daemon [7966162: 549] active package: "ncurses-5.9-9-x86_gcc2.hpkg" package_daemon [7966270: 549] active package: "libwebp-0.5.0-1-x86_gcc2.hpkg" package_daemon [7966380: 549] active package: "libpng16_devel-1.6.20-1-x86_gcc2.hpkg" package_daemon [7966501: 549] active package: "jpeg_x86_devel-9-3-x86_gcc2.hpkg" package_daemon [7966616: 549] active package: "gzip-1.6-2-x86_gcc2.hpkg" package_daemon [7966720: 549] active package: "giflib6-5.0.5-2-x86_gcc2.hpkg" package_daemon [7966831: 549] active package: "ffmpeg_x86-2.8.1-1-x86_gcc2.hpkg" package_daemon [7966945: 549] active package: "ca_root_certificates-2015_10_28-1-any.hpkg" package_daemon [7967073: 549] active package: "unzip-6.0-2-x86_gcc2.hpkg" package_daemon [7967178: 549] active package: "scons-2.3.1-4-x86_gcc2.hpkg" package_daemon [7967286: 549] active package: "ncurses6-6.0-1-x86_gcc2.hpkg" package_daemon [7967395: 549] active package: "libwebp_x86-0.5.0-1-x86_gcc2.hpkg" package_daemon [7967510: 549] active package: "less-451-4-x86_gcc2.hpkg" package_daemon [7967613: 549] active package: "haiku-r1~alpha4_pm_hrev50095-1-x86_gcc2.hpkg" package_daemon [7967744: 549] active package: "giflib_x86-5.1.2-1-x86_gcc2.hpkg" package_daemon [7967867: 549] The latest volume state is also the currently active one package_daemon [7968014: 549] Volume::InitialVerify((nil), (nil)) if_initname(0x82a1e400, bge, 24) [broadcom570x] broadcom570x: /dev/net/broadcom570x/0 [broadcom570x] () Found MII: brgphy [broadcom570x] () OUI 0x001be9, model 0x0019, rev. 1 [broadcom570x] () ifmedia_add: Adding Entry... Type: Ethernet SubType: 10baseT/UTP 10baseTifmedia_add: Adding Entry... Type: Ethernet SubType: 10baseT/UTP Shared Option[0]: full-duplex , 10baseT-FDXifmedia_add: Adding Entry... Type: Ethernet SubType: 100baseTX , 100baseTXifmedia_add: Adding Entry... Type: Ethernet SubType: 100baseTX Shared Option[0]: full-duplex , 100baseTX-FDXifmedia_add: Adding Entry... Type: Ethernet SubType: 1000baseT , 1000baseTifmedia_add: Adding Entry... Type: Ethernet SubType: 1000baseT , 1000baseT-masterifmedia_add: Adding Entry... Type: Ethernet SubType: 1000baseT Shared Option[0]: full-duplex , 1000baseT-FDXifmedia_add: Adding Entry... Type: Ethernet SubType: 1000baseT Shared Option[0]: full-duplex , 1000baseT-FDX-masterifmedia_add: Adding Entry... Type: Ethernet SubType: autoselect , auto ifmedia_set: target Type: Ethernet SubType: autoselect ifmedia_set: setting to Type: Ethernet SubType: autoselect broadcom570x: init_driver(0x81ad6090) at 10 loaded driver /boot/system/add-ons/kernel/drivers/dev/net/broadcom570x package_daemon [8000130: 549] Volume::InitialVerify(): volume at "/boot/system" is consistent package_daemon [8001482: 549] Failed to open packages activation file: No such file or directory package_daemon [8001621: 549] Failed to get activated packages info from activated packages file. Assuming all package files in package directory are activated. package_daemon [8001854: 549] latest volume state: package_daemon [8001929: 549] The latest volume state is also the currently active one package_daemon [8002073: 549] Volume::InitialVerify(0x1858e438, (nil)) Radeon - init_hardware: Version: 5.1.6.0 Radeon - Radeon_CardDetect: no supported devices found package_daemon [8006525: 549] Volume::InitialVerify(): volume at "/boot/home/config" is consistent intel_extreme: CALLED status_t device_open(const char *, long unsigned int, void **) intel_extreme: intel_extreme: CALLED status_t intel_extreme_init(intel_info &) add_memory_type_range(4236, 0xc2000000, 0x400000, 0) set MTRRs to: mtrr: 0: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 1: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 2: base: 0xb0000000, size: 0x10000000, type: 1 add_memory_type_range(4238, 0x0, 0x40000, 0) set MTRRs to: mtrr: 0: base: 0x0, size: 0x40000, type: 0 mtrr: 1: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 3: base: 0xb0000000, size: 0x10000000, type: 1 intel_gart: detected 1 MB of stolen memory, aperture size 256 MB, GTT size 256 KB intel_gart: GTT base = 0x0 intel_gart: MMIO base = 0xc2000000 intel_gart: GMR base = 0xb0000000 add_memory_type_range(4239, 0xb0000000, 0x10000000, 1) set MTRRs to: mtrr: 0: base: 0x0, size: 0x40000, type: 0 mtrr: 1: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 3: base: 0xb0000000, size: 0x10000000, type: 1 add_memory_type_range(4243, 0xc2000000, 0x400000, 0) set MTRRs to: mtrr: 0: base: 0x0, size: 0x40000, type: 0 mtrr: 1: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 3: base: 0xb0000000, size: 0x10000000, type: 1 AGP: create memory 0x82b82e80, base e0000000, size 10000, flags 0 AGP: allocation is made of reserved memory AGP: reserved memory already bound intel_extreme:CALLED status_t intel_en_gating(intel_info &) intel_extreme:IvyBridge clock gating intel_extreme:CALLED status_t intel_en_downclock(intel_info &) usb_asix:00.08.023:init_driver::ver.0.10.1 intel_extreme: intel_en_downclock: Enabling Intel GPU auto downclocking depth 1 loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_asix add_memory_type_range(4244, 0xc0000, 0x10000, 0) set MTRRs to: mtrr: 0: base: 0x0, size: 0x40000, type: 0 mtrr: 1: base: 0xc0000, size: 0x20000, type: 0 mtrr: 2: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 3: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 4: base: 0xb0000000, size: 0x10000000, type: 1 intel_extreme: mapping VBIOS: 0xc0000 -> 0x81b79000 intel_extreme: parsing BDB blocks remove_memory_type_range(4244, 0xc0000, 0x10000, 0) set MTRRs to: mtrr: 0: base: 0x0, size: 0x40000, type: 0 mtrr: 1: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 3: base: 0xb0000000, size: 0x10000000, type: 1 AGP: create memory 0x82b82f20, base e00ff000, size 1000, flags 2 AGP: allocate 4096 bytes out of 4096 AGP: bind 4096 bytes at e00ff000 allocate_io_interrupt_vectors: allocated 1 vectors starting from 25 msi_allocate_vectors: allocated 1 vectors starting from 25 msi enabled: 0x0001 intel_extreme: using message signaled interrupts intel_extreme: intel_extreme_init: completed successfully! intel_extreme: accelerant: intel_extreme.accelerant intel_extreme accelerant:CALLED status_t intel_init_accelerant(int) intel_extreme accelerant:head detected: 0x1 intel_extreme accelerant:adpa: 00040000, dova: 0000001c, dovb: 0000001c, lvds: 00000000 DDC: ddc2_read: DDC information read failure Last message repeated 19 times. usb_davicom:00.08.054:init_driver::ver.0.9.5 loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_davicom DDC: ddc2_read: DDC information read failure Last message repeated 3 times. Test: and [file_exists [/system/bin/FirstBootPrompt], or [not [file_exists [/boot/home/config/settings/Locale settings]], readonly ]] -> 0 loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_ecm etherpci: init_driver init_driver: etherpci not found sis19x:00.08.151:init_hardware::SiS19X:init_hardware() intel_extreme accelerant:CALLED status_t intel_get_edid_info(void *, long unsigned int, uint32 *) intel_extreme accelerant:CALLED status_t intel_get_edid_info(void *, long unsigned int, uint32 *) intel_extreme accelerant:CALLED uint32 intel_accelerant_mode_count() intel_extreme accelerant:CALLED status_t intel_get_mode_list(display_mode *) intel_extreme accelerant:intel_set_display_mode(1024x768) loaded driver /boot/system/add-ons/kernel/drivers/dev/net/pegasus ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s AGP: create memory 0x82b7a4a0, base e0100000, size 300000, flags 0 AGP: allocate 3145728 bytes out of 3145728 AGP: bind 3145728 bytes at e0100000 intel_extreme accelerant:PLL limits, min: p 5 (p1 1, p2 10), n 1, m 79 (m1 12, m2 5) intel_extreme accelerant:PLL limits, max: p 80 (p1 8, p2 5), n 5, m 127 (m1 22, m2 9) intel_extreme accelerant:compute_pll_divisors: required MHz: 65 intel_extreme accelerant:compute_pll_divisors: found: 64.8 MHz, p = 40 (p1 = 4, p2 = 10), n = 3, m = 81 (m1 = 15, m2 = 6) intel_extreme accelerant:CALLED status_t intel_get_frame_buffer_config(frame_buffer_config *) [net/broadcom570x/0] compat_open(0x2) [broadcom570x] (bge) Disabling fastboot slab memory manager: created area 0xdf801000 (5276) loaded driver /boot/system/add-ons/kernel/drivers/dev/input/usb_hid ps2_hid: init_hardware ps2_hid: init_driver ps2: active multiplexing v1.1 enabled ps2_hid: publish_devices ps2_hid: uninit_driver loaded driver /boot/system/add-ons/kernel/drivers/dev/input/ps2_hid ps2: reset failed ps2: devfs_publish_device input/mouse/ps2/0, status = 0xffffffff loaded driver /boot/system/add-ons/kernel/drivers/dev/input/wacom Running first login script /boot/system/boot/first-login/default_deskbar_items.sh ... ALPS not supported: 10 00 64 ps2: probe_mouse Standard PS/2 mouse found ps2: devfs_publish_device input/mouse/ps2/standard_1, status = 0x00000000 ps2: reset failed ps2: devfs_publish_device input/mouse/ps2/2, status = 0xffffffff ps2: reset failed ps2: devfs_publish_device input/mouse/ps2/3, status = 0xffffffff ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000 ps2: keyboard found ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s [broadcom570x] (bge) firmware handshake timed out, found 0x00000000 [broadcom570x] (bge) Disabling fastboot loaded driver /boot/system/add-ons/kernel/drivers/dev/bus/usb_raw firewire: fw_module_init firewire: found 0 cards firewire: fw_module_uninit bfs: bfs_create_index:2127: File or Directory already exists bfs: bfs_create_index:2127: File or Directory already exists auvia: init_hardware() pci_reserve_device(0, 27, 0, hda) HDA: Detected controller @ PCI:0:27:0, IRQ:22, type 8086/1e20 (1025/0713) loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/hda emuxki: init_hardware() auich: init_hardware() sis7018:init_hardware:ver:2.0.2 echo3g: init_hardware() echo3g: no card found ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s add_memory_type_range(7114, 0xc2800000, 0x4000, 0) set MTRRs to: mtrr: 0: base: 0x0, size: 0x40000, type: 0 mtrr: 1: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 3: base: 0xb0000000, size: 0x10000000, type: 1 allocate_io_interrupt_vectors: allocated 1 vectors starting from 26 msi_allocate_vectors: allocated 1 vectors starting from 26 msi enabled: 0x0081 hda: using MSI vector 26 hda: DMA snooping: yes hda: HDA v1.0, O:4/I:4/B:0, #SDO:1, 64bit:yes hda: Codec 0 Vendor: 10ec Product: 0269, Revision: 1.0.1.0 Quirks: 0700 hda: Audio Group: Output delay: 15 samples, Input delay: 15 samples, Beep Generator: yes hda: #GPIO: 2, #GPO: 0, #GPI: 0, unsol: yes, wake: no hda: Supported formats: 16bits 20bits 24bits hda: Supported rates: 44khz 48khz 96khz 192khz hda: widget start 2, count 34 hda: 2: Audio output hda: Supported formats: 16bits 20bits 24bits hda: Supported rates: 44khz 48khz 96khz 192khz hda: Supported power states: D0 hda: [Format override] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87 hda: 3: Audio output hda: Supported formats: 16bits 20bits 24bits hda: Supported rates: 44khz 48khz 96khz 192khz hda: Supported power states: D0 hda: [Format override] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87 hda: 4: Vendor defined hda: Supported power states: hda: 5: Vendor defined hda: Supported power states: hda: 6: Audio output hda: Supported formats: 16bits 20bits 24bits hda: Supported rates: 44khz 48khz 88khz 96khz 192khz hda: Supported power states: D0 hda: [Digital] [Format override] [Stereo] hda: 7: Vendor defined hda: Supported power states: hda: 8: Audio input hda: Supported formats: 16bits 20bits 24bits hda: Supported rates: 44khz 48khz 96khz 192khz hda: Supported power states: D0 hda: [Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11 hda: Inputs: <35> hda: 9: Audio input hda: Supported formats: 16bits 20bits 24bits hda: Supported rates: 44khz 48khz 96khz 192khz hda: Supported power states: D0 hda: [Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11 hda: Inputs: <34> hda: 10: Vendor defined hda: Supported power states: hda: 11: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23 hda: Inputs: 24 25 26 27 29 hda: 12: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: 2 11 hda: 13: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: 3 11 hda: 14: Vendor defined hda: Supported power states: hda: 15: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] hda: In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: 2 11 hda: 16: Vendor defined hda: Supported power states: hda: 17: Vendor defined hda: Supported power states: hda: 18: Pin complex hda: [Input] hda: Fixed, Mic in, ATAPI internal, N/A, Association:2 hda: Supported power states: D0 hda: [Amplifier override] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: 19: Vendor defined hda: Supported power states: hda: 20: Pin complex hda: [Output] hda: Fixed, Speaker, ATAPI internal, N/A, Association:1 hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: 12 13 hda: 21: Vendor defined hda: Supported power states: hda: 22: Vendor defined hda: Supported power states: hda: 23: Pin complex hda: [Output] hda: None, Speaker, 1/8", Black, Association:15 hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [Out amplifier] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <15> hda: 24: Pin complex hda: [Input] [Output] hda: None, Speaker, 1/8", Black, Association:15 hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <13> hda: 25: Pin complex hda: [Input] hda: None, Speaker, 1/8", Black, Association:15 hda: Supported power states: D0 hda: [Unsol. responses] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: 26: Pin complex hda: [Input] [Output] hda: None, Speaker, 1/8", Black, Association:15 hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: 12 13 hda: 27: Pin complex hda: [Input] [Output] hda: None, Speaker, 1/8", Black, Association:15 hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: 12 13 hda: 28: Vendor defined hda: Supported power states: hda: 29: Pin complex hda: [Input] hda: None, Line out, Other analog, Pink, Association:2 hda: Supported power states: D0 hda: 30: Pin complex hda: [Output] hda: None, Speaker, 1/8", Black, Association:15 hda: Supported power states: D0 hda: [Digital] [Conn. list] [Unsol. responses] [Stereo] hda: Inputs: <6> hda: 31: Vendor defined hda: Supported power states: hda: 32: Vendor defined hda: Supported power states: hda: [Proc widget] hda: 33: Pin complex hda: [Output] hda: Jack, Left HP out, 1/8", Black, Association:1 hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: 12 13 hda: 34: Audio selector hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: Inputs: 24 25 26 27 29 11 18 hda: 35: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: 24 25 26 27 29 11 hda: build output tree: use mixer hda: look at pin widget 20 (2 inputs) hda: try widget 12: 0x82f596b8 hda: widget 12 is candidate hda: output: added output widget 2 hda: output: added mixer/selector widget 12 hda: output: not added mixer/selector widget 11 hda: add pin widget 20 hda: look at pin widget 23 (1 inputs) hda: try widget 15: 0x82f598bc hda: widget 15 is candidate hda: output: added output widget 2 hda: output: added mixer/selector widget 15 hda: output: not added mixer/selector widget 11 hda: add pin widget 23 hda: look at pin widget 24 (1 inputs) hda: try widget 13: 0x82f59764 hda: widget 13 is candidate hda: output: added output widget 3 hda: output: added mixer/selector widget 13 hda: output: not added mixer/selector widget 11 hda: add pin widget 24 hda: look at pin widget 26 (2 inputs) hda: try widget 12: 0x82f596b8 hda: widget 12 is candidate hda: try widget 13: 0x82f59764 hda: widget 13 is candidate hda: look at pin widget 27 (2 inputs) hda: try widget 12: 0x82f596b8 hda: widget 12 is candidate hda: try widget 13: 0x82f59764 hda: widget 13 is candidate hda: look at pin widget 30 (1 inputs) hda: try widget 6: 0x82f592b0 hda: look at pin widget 33 (2 inputs) hda: try widget 12: 0x82f596b8 hda: widget 12 is candidate hda: add pin widget 33 hda: build input tree hda: look at input widget 8 (1 inputs) hda: try widget 35: 0x82f5a62c hda: widget 35 is candidate hda: input: not added mixer/selector widget 11 hda: input: not added mixer/selector widget 35 hda: look at input widget 9 (1 inputs) hda: try widget 34: 0x82f5a580 hda: widget 34 is candidate hda: input: not added mixer/selector widget 11 hda: input: added input widget 18 hda: input: added mixer/selector widget 34 hda: add pin widget 9 hda: build tree! hda: Audiogroup: hda: 2: Audio output hda: Supported power states: D0 hda: [Format override] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87 hda: 3: Audio output hda: Supported power states: D0 hda: [Format override] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87 hda: 4: Vendor defined hda: Supported power states: hda: 5: Vendor defined hda: Supported power states: hda: 6: Audio output hda: Supported power states: D0 hda: [Digital] [Format override] [Stereo] hda: 7: Vendor defined hda: Supported power states: hda: 8: Audio input hda: Supported power states: D0 hda: [Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11 hda: Inputs: <35> hda: 9: Audio input hda: Supported power states: D0 hda: [Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11 hda: Inputs: <34> hda: 10: Vendor defined hda: Supported power states: hda: 11: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23 hda: Inputs: <24> 25 26 27 29 hda: 12: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <2> 11 hda: 13: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <3> 11 hda: 14: Vendor defined hda: Supported power states: hda: 15: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] hda: In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <2> 11 hda: 16: Vendor defined hda: Supported power states: hda: 17: Vendor defined hda: Supported power states: hda: 18: Pin complex hda: [Input] hda: Supported power states: D0 hda: [Amplifier override] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: 19: Vendor defined hda: Supported power states: hda: 20: Pin complex hda: [Pres Detect][Output][EAPD] hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <12> 13 hda: 21: Vendor defined hda: Supported power states: hda: 22: Vendor defined hda: Supported power states: hda: 23: Pin complex hda: [Output] hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [Out amplifier] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <15> hda: 24: Pin complex hda: [Pres Detect][Output][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80] hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <13> hda: 25: Pin complex hda: [Pres Detect][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80] hda: Supported power states: D0 hda: [Unsol. responses] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: 26: Pin complex hda: [Pres Detect][HP Drive][Output][Input] hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <12> 13 hda: 27: Pin complex hda: [Pres Detect][Output][Input] hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] hda: In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0 hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <12> 13 hda: 28: Vendor defined hda: Supported power states: hda: 29: Pin complex hda: [Input] hda: Supported power states: D0 hda: 30: Pin complex hda: [Pres Detect][Output] hda: Supported power states: D0 hda: [Digital] [Conn. list] [Unsol. responses] [Stereo] hda: Inputs: <6> hda: 31: Vendor defined hda: Supported power states: hda: 32: Vendor defined hda: Supported power states: hda: [Proc widget] hda: 33: Pin complex hda: [Pres Detect][HP Drive][Output] hda: Supported power states: D0 hda: [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <12> 13 hda: 34: Audio selector hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: Inputs: 24 25 26 27 29 11 <18> hda: 35: Audio mixer hda: Supported power states: D0 hda: [Conn. list] [Amplifier override] [In amplifier] [Stereo] hda: In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <24> 25 26 27 29 11 hda: Enabled unsolicited responses on widget 33 hda: UNMUTE/SET OUTPUT GAIN widget 2 (offset 87) hda: UNMUTE/SET OUTPUT GAIN widget 3 (offset 87) hda: UNMUTE/SET INPUT GAIN widget 12 (offset 0) hda: UNMUTE/SET INPUT GAIN widget 13 (offset 0) hda: UNMUTE/SET INPUT GAIN widget 15 (offset 0) hda: ENABLE pin widget 20 hda: ENABLE EAPD pin widget 20 hda: UNMUTE/SET OUTPUT GAIN widget 20 (offset 0) hda: ENABLE pin widget 23 hda: UNMUTE/SET OUTPUT GAIN widget 23 (offset 0) hda: ENABLE pin widget 24 hda: UNMUTE/SET OUTPUT GAIN widget 24 (offset 0) hda: UNMUTE/SET INPUT GAIN widget 24 (offset 0) hda: ENABLE pin widget 33 hda: UNMUTE/SET OUTPUT GAIN widget 33 (offset 0) hda: UNMUTE/SET INPUT GAIN widget 9 (offset 11) hda: ENABLE pin widget 18 hda: UNMUTE/SET INPUT GAIN widget 18 (offset 0) hda: streams playback 0xdf07de28, record 0xdf07dce8 hda: sensed pin widget 33, 0 hda: Codec 3 Vendor: 8086 Product: 2806, Revision: 1.0.0.0 Quirks: 0700 hda: Audio Group: Output delay: 4 samples, Input delay: 0 samples, Beep Generator: no hda: #GPIO: 0, #GPO: 0, #GPI: 0, unsol: no, wake: no hda: Supported formats: hda: Supported rates: hda: widget start 2, count 7 hda: 2: Audio output hda: Supported formats: 16bits 20bits 24bits 32bits bitstream hda: Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz hda: Supported power states: D0 D3 hda: [Power] [Digital] [Format override] [Stereo] hda: 3: Audio output hda: Supported formats: 16bits 20bits 24bits 32bits bitstream hda: Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz hda: Supported power states: D0 D3 hda: [Power] [Digital] [Format override] [Stereo] hda: 4: Audio output hda: Supported formats: 16bits 20bits 24bits 32bits bitstream hda: Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz hda: Supported power states: D0 D3 hda: [Power] [Digital] [Format override] [Stereo] hda: 5: Pin complex hda: [Output] hda: Jack, HDMI Digital other out, Other digital, N/A, Association:1 hda: Supported power states: D0 D3 hda: [CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <2> hda: 6: Pin complex hda: [Output] hda: None, HDMI Digital other out, Other digital, N/A, Association:2 hda: Supported power states: D0 D3 hda: [CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <3> hda: 7: Pin complex hda: [Output] hda: None, HDMI Digital other out, Other digital, N/A, Association:3 hda: Supported power states: D0 D3 hda: [CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <4> hda: 8: Vendor defined hda: Supported power states: hda: build output tree: use mixer hda: look at pin widget 5 (1 inputs) hda: try widget 2: 0xdf167840 hda: look at pin widget 6 (1 inputs) hda: try widget 3: 0xdf1678ec hda: look at pin widget 7 (1 inputs) hda: try widget 4: 0xdf167998 hda: try without mixer! hda: build output tree: don't use mixer hda: look at pin widget 5 (1 inputs) hda: try widget 2: 0xdf167840 hda: widget 2 is candidate hda: output: added output widget 2 hda: add pin widget 5 hda: look at pin widget 6 (1 inputs) hda: try widget 3: 0xdf1678ec hda: widget 3 is candidate hda: output: added output widget 3 hda: add pin widget 6 hda: look at pin widget 7 (1 inputs) hda: try widget 4: 0xdf167998 hda: widget 4 is candidate hda: output: added output widget 4 hda: add pin widget 7 hda: build input tree hda: build input tree failed hda: build tree! hda: Audiogroup: hda: 2: Audio output hda: Supported power states: D0 D3 hda: [Power] [Digital] [Format override] [Stereo] hda: 3: Audio output hda: Supported power states: D0 D3 hda: [Power] [Digital] [Format override] [Stereo] hda: 4: Audio output hda: Supported power states: D0 D3 hda: [Power] [Digital] [Format override] [Stereo] hda: 5: Pin complex hda: [Pres Detect][Output] hda: Supported power states: D0 D3 hda: [CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <2> hda: 6: Pin complex hda: [Pres Detect][Output] hda: Supported power states: D0 D3 hda: [CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <3> hda: 7: Pin complex hda: [Pres Detect][Output] hda: Supported power states: D0 D3 hda: [CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] hda: Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0 hda: Inputs: <4> hda: 8: Vendor defined hda: Supported power states: hda: Enabled unsolicited responses on widget 5 hda: Enabled unsolicited responses on widget 6 hda: Enabled unsolicited responses on widget 7 hda: ENABLE pin widget 5 hda: UNMUTE/SET OUTPUT GAIN widget 5 (offset 0) hda: ENABLE pin widget 6 hda: UNMUTE/SET OUTPUT GAIN widget 6 (offset 0) hda: ENABLE pin widget 7 hda: UNMUTE/SET OUTPUT GAIN widget 7 (offset 0) hda: hda_audio_group_get_widgets failed for playback stream hda: hda_audio_group_get_widgets failed for record stream hda: streams playback 0x00000000, record 0x00000000 hda: Failed to setup new audio function group (No such device)! hda: sample size 4, num channels 2, buffer length 10240 hda: hda_stream_setup_buffers: setup stream 1: SR=192000, SF=24 F=0x1831 (0x100) hda: hda_stream_setup_buffers(Playback): Allocated 163840 bytes for 2 buffers hda: hda_stream_setup_buffers(Playback): Allocated 4096 bytes for 2 BDLEs hda: stream: 1 fifo size: 1536 num_io_widgets: 2 hda: widgets: 2 3 hda: sample size 4, num channels 2, buffer length 10240 hda: hda_stream_setup_buffers: setup stream 2: SR=192000, SF=24 F=0x1831 (0x100) hda: hda_stream_setup_buffers(Recording): Allocated 163840 bytes for 2 buffers hda: hda_stream_setup_buffers(Recording): Allocated 4096 bytes for 2 BDLEs hda: stream: 2 fifo size: 1536 num_io_widgets: 1 hda: widgets: 9 hda_stream_start() offset 80 hda_stream_start() offset 0 cx23882: init_hardware() [broadcom570x] (bge) firmware handshake timed out, found 0x00000000 [broadcom570x] (bge) Disabling fastboot ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s [broadcom570x] (bge) firmware handshake timed out, found 0x00000000 ifmedia_ioctl: switching bge to Type: Ethernet SubType: autoselect [broadcom570x] (bge) Disabling fastboot ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s [broadcom570x] (bge) firmware handshake timed out, found 0x00000000 [broadcom570x] (bge) Disabling fastboot ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s [broadcom570x] (bge) firmware handshake timed out, found 0x00000000 /dev/net/broadcom570x/0: media change, media 0x22 quality 1000 speed 10000000 ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::ScsiReadCapacity port 0 ahci: SectorSize 512, SectorCount 0x74706db0 ahci: sg_memcpy phyAddr 0x1ea118a0, size 8 ahci: AHCIPort::ScsiReadCapacity port 0 ahci: SectorSize 512, SectorCount 0x74706db0 ahci: sg_memcpy phyAddr 0x1ea11860, size 8 bfs: mounted "Haiku" (root node at 524288, device = /dev/disk/scsi/0/0/0/1) ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s bfs: bfs_create_index:2127: File or Directory already exists Last message repeated 11 times. ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s slab memory manager: created area 0xf0001000 (7872) ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s register_domain(4, link) ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s Launching x-vnd.be-tskb failed: System shutting down hda_stream_stop() hda_stream_stop() remove_memory_type_range(7114, 0xc2800000, 0x4000, 0) set MTRRs to: mtrr: 0: base: 0x0, size: 0x40000, type: 0 mtrr: 1: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 3: base: 0xb0000000, size: 0x10000000, type: 1 ahci: AHCIPort::SoftReset port 5 ahci: Disable: port 5 ahci: Enable: port 5 ahci: AHCIPort::PortReset port 5 ahci: Disable: port 5 ahci: PhyReady Change ahci: Port Connect Change ahci: Port Connect Change ahci: PhyReady Change ahci: Enable: port 5 ahci: Probe: port 5 link speed 1.5Gb/s Launching x-vnd.be-trak failed: System shutting down intel_extreme: CALLED status_t device_close(void *) intel_extreme: intel_extreme: CALLED void intel_extreme_uninit(intel_info &) msi_free_vectors: freeing 1 vectors starting from 25 free_io_interrupt_vectors: freeing 1 vectors starting from 25 AGP: delete memory 0x82b82e80 AGP: delete memory 0x82b82f20 AGP: unbind 4096 bytes at ff000 AGP: delete memory 0x82b7a4a0 AGP: unbind 3145728 bytes at 100000 remove_memory_type_range(4236, 0xc2000000, 0x400000, 0) set MTRRs to: mtrr: 0: base: 0x0, size: 0x40000, type: 0 mtrr: 1: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 2: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 3: base: 0xb0000000, size: 0x10000000, type: 1 remove_memory_type_range(4238, 0x0, 0x40000, 0) set MTRRs to: mtrr: 0: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 1: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 2: base: 0xb0000000, size: 0x10000000, type: 1 remove_memory_type_range(4239, 0xb0000000, 0x10000000, 1) set MTRRs to: mtrr: 0: base: 0xa6c00000, size: 0x400000, type: 0 mtrr: 1: base: 0xc0000000, size: 0x40000000, type: 0 mtrr: 2: base: 0xb0000000, size: 0x10000000, type: 1 remove_memory_type_range(4243, 0xc2000000, 0x400000, 0)