Be Intel Pentium Kernel version of May 11 2001 time 15:40:59 (C) Copyright 1991-97 Be, Inc. All Rights Reserved. Total Memory 512 MB CPU features: 240 IBM PC Compatible platform CPU speed is 2035MHZ PCI: initiating new PCI scan bus 0 device 0 function 0: vendor 8086 device 1a30 revision 04 class_base = 6 class_function = 00 class_api = 00 line_size=00 latency_timer=00 header_type = 00 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 8088 subsystemn vendor id 1043 interrupt_line=00 interrupt_pin=00 min_grant=00 max_latency=00 base reg 0: host addr f8000000 pci f8000000 size 04000000, flags 08 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 0 device 1 function 0: vendor 8086 device 1a31 revision 04 class_base = 6 class_function = 04 class_api = 00 line_size=00 latency_timer=40 header_type = 01 BIST=00 primary_bus= 0 secondary_bus= 1 subordinate_bus= 1 secondary_latency= 0 memory_base = 0000ee00 memory_limit = 0000efe0 bridge_control = 0008 secondary_status = 22a0 interrupt_line=00 interrupt_pin=00 base reg 0: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 1 device 0 function 0: vendor 10de device 0181 revision a2 class_base = 3 class_function = 00 class_api = 00 line_size=00 latency_timer=40 header_type = 00 BIST=00 rom_base=effe0000 pci effe0000 size=00020000 cardbus_CIS 00000000 subsystem id 0000 subsystemn vendor id 0000 interrupt_line=0b interrupt_pin=01 min_grant=05 max_latency=01 base reg 0: host addr ee000000 pci ee000000 size 01000000, flags 00 base reg 1: host addr f0000000 pci f0000000 size 08000000, flags 08 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 0 device 30 function 0: vendor 8086 device 244e revision 05 class_base = 6 class_function = 04 class_api = 00 line_size=00 latency_timer=00 header_type = 01 BIST=00 primary_bus= 0 secondary_bus= 2 subordinate_bus= 2 secondary_latency=32 memory_base = 0000ed00 memory_limit = 0000edf0 bridge_control = 0006 secondary_status = 2280 interrupt_line=00 interrupt_pin=00 base reg 0: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 2 device 5 function 0: vendor 1106 device 3038 revision 50 class_base = 12 class_function = 03 class_api = 00 line_size=08 latency_timer=20 header_type = 80 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 8080 subsystemn vendor id 1043 interrupt_line=0a interrupt_pin=01 min_grant=00 max_latency=00 base reg 0: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 0000d800 pci 0000d800 size 00000020, flags 01 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 2 device 5 function 1: vendor 1106 device 3038 revision 50 class_base = 12 class_function = 03 class_api = 00 line_size=08 latency_timer=20 header_type = 80 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 8080 subsystemn vendor id 1043 interrupt_line=03 interrupt_pin=02 min_grant=00 max_latency=00 base reg 0: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 0000d400 pci 0000d400 size 00000020, flags 01 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 2 device 5 function 2: vendor 1106 device 3104 revision 51 class_base = 12 class_function = 03 class_api = 20 line_size=08 latency_timer=20 header_type = 80 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 8080 subsystemn vendor id 1043 interrupt_line=07 interrupt_pin=03 min_grant=00 max_latency=00 base reg 0: host addr ed800000 pci ed800000 size 00000100, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 2 device 11 function 0: vendor 1102 device 0004 revision 03 class_base = 4 class_function = 01 class_api = 00 line_size=00 latency_timer=20 header_type = 80 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 0052 subsystemn vendor id 1102 interrupt_line=09 interrupt_pin=01 min_grant=02 max_latency=14 base reg 0: host addr 0000d000 pci 0000d000 size 00000020, flags 01 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 2 device 11 function 1: vendor 1102 device 7003 revision 03 class_base = 9 class_function = 80 class_api = 00 line_size=00 latency_timer=20 header_type = 80 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 0040 subsystemn vendor id 1102 interrupt_line=00 interrupt_pin=00 min_grant=00 max_latency=00 base reg 0: host addr 0000b800 pci 0000b800 size 00000008, flags 01 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 2 device 12 function 0: vendor 1113 device 1211 revision 10 class_base = 2 class_function = 00 class_api = 00 line_size=00 latency_timer=20 header_type = 00 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 1211 subsystemn vendor id 1113 interrupt_line=05 interrupt_pin=01 min_grant=20 max_latency=40 base reg 0: host addr 0000b400 pci 0000b400 size 00000100, flags 01 base reg 1: host addr ed000000 pci ed000000 size 00000100, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 0 device 31 function 0: vendor 8086 device 2440 revision 05 class_base = 6 class_function = 01 class_api = 00 line_size=00 latency_timer=00 header_type = 80 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 0000 subsystemn vendor id 0000 interrupt_line=00 interrupt_pin=00 min_grant=00 max_latency=00 base reg 0: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 0 device 31 function 1: vendor 8086 device 244b revision 05 class_base = 1 class_function = 01 class_api = 80 line_size=00 latency_timer=00 header_type = 00 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 8028 subsystemn vendor id 1043 interrupt_line=00 interrupt_pin=00 min_grant=00 max_latency=00 base reg 0: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 0000a800 pci 0000a800 size 00000010, flags 01 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 0 device 31 function 2: vendor 8086 device 2442 revision 05 class_base = 12 class_function = 03 class_api = 00 line_size=00 latency_timer=00 header_type = 00 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 8028 subsystemn vendor id 1043 interrupt_line=07 interrupt_pin=04 min_grant=00 max_latency=00 base reg 0: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 0000a400 pci 0000a400 size 00000020, flags 01 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 bus 0 device 31 function 4: vendor 8086 device 2444 revision 05 class_base = 12 class_function = 03 class_api = 00 line_size=00 latency_timer=00 header_type = 00 BIST=00 rom_base=00000000 pci 00000000 size=00000000 cardbus_CIS 00000000 subsystem id 8028 subsystemn vendor id 1043 interrupt_line=09 interrupt_pin=03 min_grant=00 max_latency=00 base reg 0: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 1: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 2: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 3: host addr 00000000 pci 00000000 size 00000000, flags 00 base reg 4: host addr 0000a000 pci 0000a000 size 00000020, flags 01 base reg 5: host addr 00000000 pci 00000000 size 00000000, flags 00 PCI: chipset uses mechanism #1 pci_init Done Started other CPUs sysinit1: 1 dma coherent with respect to CPU cache sysinit1: 2 NTHREADS = 4096, NTEAMS = 1024, NSEMS = 65536 NAREAS = 32768 NPORTS = 8192, MAXMSGS = 16384, MAXBUFS = 16384 sysinit1: 3 sysinit1: 4 MMU large pages: available BIOS: used(0x0009f000, 61000) BIOS: used(0x1ffec000, 14000) need 4119 segment descriptors handlers: apicsz = 12, picsz = 12 VM initialized (NEW WAY) sysinit1: 5 sysinit1: 6 sysinit1: 7 cache threshold is 64 sysinit1: 8 sysinit1: 9 sysinit1: 10 sysinit1: 11 sysinit1: 12 sysinit1: 13 sysinit1: 14 sysinit1: 15 sysinit1: 16 sysinit1: 17 sysinit1: 18 sysinit1: 19 sysinit1: 20 sysinit1: 21 sysinit1: 22 sysinit1: 23 sysinit1: 24 sysinit1: 25 sysinit1: 26 sysinit2: 0 sysinit2: 1 sysinit2: 2 sysinit2: 3 sysinit2: 6 sysinit2: 7 vga_init_driver() boot_frame_buffer = 0 vga_uninit_driver() IDE PCI -- find_devices: DMA capable IDE controller found IDE PCI -- find_devices: controller supports DMA IDE PCI -- find_devices: interrupts are sharable IDE -- try_module: busses/ide/pcmcia/v0.6 is wrong version sysIDE -- send_ata: cleared 1 pending interrupt init1: IDE ATA -- configure_dma: drive dma mode: 0x15 IDE ATA -- configure_overlap: device doesn't support overlapped commands 27 IDE ATA -- get_bios_driveinfo: checksum of ata/0/0 matched bios drive 0x80 IDE -- send_ata: cleared 1 pending interrupt IDE PCI -- uninit ISA DMA: unsupported chipset flo_init: cyl_map[0].address = 0x00001000 size = 00004800 flo_init: cyl_map[1].address = 0 size = 00000000 floppy uninit() KERNEL: make_fixed_driver: driver already exists! (ata) can't add boot driver ata to /dev IDE -- init_v06: IDE PCI -- find_devices: DMA capable IDE controller found IDE PCI -- find_devices: controller supports DMA IDE PCI -- find_devices: interrupts are sharable IDE -- try_module: busses/ide/pcmcia/v0.6 is wrong version IDE PCI - intwait: timeout - status: 0xd0, bm-status: 0x24 regs: 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0 IDE PCI - intwait: timeout - status: 0x00, bm-status: 0x24 regs: 0x04, 0x6e, 0x18, 0x00, 0x1c, 0x7e IDE PCI - intwait: timeout - status: 0x00, bm-status: 0x24 regs: 0x04, 0x6e, 0x18, 0x00, 0x1c, 0x7e IDE -- send_ata: cleared 1 pending interrupt IDE PCI - intwait: timeout - status: 0x50, bm-status: 0x24 regs: 0x00, 0x02, 0x18, 0x00, 0x02, 0x6e IDE ATAPI -- request_sense: no media, ascq 00 IDE ATAPI -- configure_device: drive dma mode: 0x12 IDE -- uninit: IDE PCI -- uninit create_area_gen error -2147483643 ( 0, 5, 1) usb_ehci: pipe change 0 for pipe 0x011dc590 usb_ehci: pipe change 0 for pipe 0x0121f7c0 usb_uhci: iospace offset: 0x0000d800 usb_uhci: iospace offset: 0x0000d400 usb_uhci: iospace offset: 0x0000a400 usb_uhci: iospace offset: 0x0000a000 USB Hub 1: port 0 disabled USB Hub 1: port 1 disabled USB Hub 1: port 0 disabled USB Hub 1: port 1 disabled scsi_cam: ccb_pool_size = 32 usb_scsi:sim_action:path_id mismatch of func:3:our:-1,requested:0 scsi_cam: module 'busses/scsi/usb/v1' loaded scsi_cam: module 'busses/scsi/usb/v1' initialized symbios: sim_install() adaptec: sim_install() symbios: sim_install() adaptec: sim_install() scsi_cam: path=0, devcount=8 symbios: sim_install() adaptec: sim_install() scsi_cam: path 0 slack... SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices can't add boot driver fmap to /dev sysinit2: 8 sysinit2: 9 sysinit2: 10 sysinit2: 11 sysinit2: 12 Scanning /dev/disk Scanning /dev/disk/floppy Trying /dev/disk/floppy/raw flo_init: cyl_map[0].address = 0x00001000 size = 00004800 flo_init: cyl_map[1].address = 0 size = 00000000 floppy uninit() Scanning /dev/disk/ide Scanning /dev/disk/ide/ata Scanning /dev/disk/ide/ata/0 Scanning /dev/disk/ide/ata/0/master Scanning /dev/disk/ide/ata/0/master/0 Trying /dev/disk/ide/ata/0/master/0/raw IDE PCI -- find_devices: DMA capable IDE controller found IDE PCI -- find_devices: controller supports DMA IDE PCI -- find_devices: interrupts are sharable IDE -- try_module: busses/ide/pcmcia/v0.6 is wrong version IDE ATA -- configure_dma: drive dma mode: 0x15 IDE ATA -- configure_overlap: device doesn't support overlapped commands IDE ATA -- get_bios_driveinfo: ata/0/0 match bios drive 0x80 IDE PCI -- uninit found boot device: /dev/disk/ide/ata/0/master/0/raw IDE PCI -- find_devices: DMA capable IDE controller found IDE PCI -- find_devices: controller supports DMA IDE PCI -- find_devices: interrupts are sharable IDE -- try_module: busses/ide/pcmcia/v0.6 is wrong version IDE ATA -- configure_dma: drive dma mode: 0x15 IDE ATA -- configure_overlap: device doesn't support overlapped commands IDE ATA -- get_bios_driveinfo: ata/0/0 match bios drive 0x80 IDE PCI -- uninit IDE PCI -- find_devices: DMA capable IDE controller found IDE PCI -- find_devices: controller supports DMA IDE PCI -- find_devices: interrupts are sharable IDE -- try_module: busses/ide/pcmcia/v0.6 is wrong version IDE ATA -- configure_dma: drive dma mode: 0x15 IDE ATA -- configure_overlap: device doesn't support overlapped commands IDE ATA -- get_bios_driveinfo: ata/0/0 match bios drive 0x80 Max log buffer == 256k Checking block bitmap... Done checking bitmap. bfs @ 0x123a280 (BeOS) on /dev/disk/ide/ata/0/master/0/0_0 sysinit2: 13 removing raw removing floppy removing raw removing 0 removing master removing 1 removing atapi removing raw removing 3 removing raw removing 2 removing raw removing 1 removing raw removing 0 removing 1 removing raw removing 3 removing raw removing 2 removing raw removing 1 removing raw removing 0 removing 0 removing 0 removing scsi sysinit2: 14 sysinit2: 15 sysinit2: 18 sysinit2: 21 kdbg: May 11 2001 15:41:26 kdbg: loaded debugger extension "debugger/disasm/v1" kdbg: loaded debugger extension "debugger/gdb-stub/v1" kdbg: loaded debugger extension "debugger/i586/v1" kdbg: loaded debugger extension "debugger/internals/v1" kdbg: loaded debugger extension "debugger/parser/v1" kdbg: loaded debugger extension "debugger/symbols/v1" sysinit2: 22 sysinit2: 23 sysinit2: 28 sysinit2: 29 sysinit2: 30 Starting /boot/beos/bin/sh /boot/beos/system/boot/Bootscript opening (gs not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (02, 00) timed out after 10 ms put_data error: input buffer not empty! Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (01, 01) timed out after 10 ms get_data error: output buffer empty! Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms flushed fe kb_mouse: wait_status (01, 01) timed out after 10 ms kbmouse init_driver: success! uninit_driver kb_mouse input_server: watch_node -> B_WATCH_DIRECTORY ++++++++ init_driver kb_mouse built May 26 2000 12:35:15 kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (01, 01) timed out after 10 ms get_data error: output buffer empty! got 0x55 after 1 retries got a 0 after 0 retries Found a keyboard! Enabling aux interface worked! kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (01, 01) timed out after 10 ms get_data error: output buffer empty! Response to mouse disable was not ACK! (was 60) kb_mouse: wait_status (01, 01) timed out after 10 ms Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (02, 00) timed out after 10 ms put_data error: input buffer not empty! Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (01, 01) timed out after 10 ms get_data error: output buffer empty! Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (02, 00) timed out after 10 ms put_data error: input buffer not empty! Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (01, 01) timed out after 10 ms get_data error: output buffer empty! Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (02, 00) timed out after 10 ms put_data error: input buffer not empty! Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms kb_mouse: wait_status (01, 01) timed out after 10 ms get_data error: output buffer empty! Response to mouse disable was not ACK! (was fe) kb_mouse: wait_status (01, 01) timed out after 10 ms flushed fe kb_mouse: wait_status (01, 01) timed out after 10 ms kbmouse init_driver: success! kbmouse open 'input/keyboard/at/0' opening AT keyboard setting up scancode mapping table from /boot/home/config/settings/AT_Keyboard_Info input_server: registering device AT Keyboard 1 80031250 from keyboard input_server: load_add_on(mouse) success input_server: instantiating device mouse input_server: StartMonitoringDevice input/mouse/usb input_server: watch_node -> B_WATCH_DIRECTORY kbmouse open 'input/mouse/serial/0' hid: adding mouse input_server: registering device USB Mouse 1 0 8003b3a0 from mouse input_server: load_add_on(serial_mouse) success input_server: instantiating device serial_mouse lucent hardware not located. error calling PnP BIOS (83) Trying data port 0x203 Trying data port 0x20f Trying data port 0x21b Trying data port 0x227 Trying data port 0x233 Trying data port 0x23f Trying data port 0x24b Trying data port 0x257 Trying data port 0x263 Trying data port 0x26f Trying data port 0x27b Trying data port 0x287 Trying data port 0x293 Trying data port 0x29f Trying data port 0x2ab Trying data port 0x2b7 Trying data port 0x2c3 Trying data port 0x2cf Trying data port 0x2db Trying data port 0x2e7 Trying data port 0x2f3 Trying data port 0x2ff PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported PCI->PCI bridges not yet supported BeOS PCMCIA Card Services 3.0.14 options: [pci] [cardbus] Intel PCIC probe: not found. BeOS PCMCIA Card Services 3.0.14 options: [pci] [cardbus] Intel PCIC probe: not found. input_server: starting device USB Mouse 1 (0) in mouse input_server: starting device AT Keyboard (1) in keyboard PATH = /boot/apps/QueryWatcher/QueryWatcher, addon_id = 230 func_name = Instantiate__13ReplicantViewP8BMessage, err = No Error bone_timers : wheel Size 512 ticks at 4096 usec steps (2097152 len) flo_init: cyl_map[0].address = 0x00001000 size = 00004800 flo_init: cyl_map[1].address = 0 size = 00000000 floppy uninit() bone_timers : wheel Size 512 ticks at 4096 usec steps (2097152 len) flo_init: cyl_map[0].address = 0x00001000 size = 00004800 flo_init: cyl_map[1].address = 0 size = 00000000 bone_util: cache_family(1): found sections - in = 0x026b63ac, out = 0x026b6398, dl = 0x026b63c0 bone_util: loading stack 1 1 2 0 IDE -- init_v06: IDE PCI - intwait: timeout - status: 0x00, bm-status: 0x24 regs: 0x00, 0x6e, 0x18, 0x00, 0x38, 0xb7 IDE PCI - intwait: timeout - status: 0x00, bm-status: 0x24 regs: 0x00, 0x6e, 0x18, 0x00, 0x38, 0xb7 IDE -- send_ata: cleared 1 pending interrupt IDE PCI - intwait: timeout - status: 0x50, bm-status: 0x24 regs: 0x00, 0x02, 0x18, 0x00, 0x02, 0xa6 IDE ATAPI -- request_sense: no media, ascq 00 IDE ATAPI -- configure_device: drive dma mode: 0x12 IDE -- uninit: PacketAlias/InitPacketAliasLog: Packet alias logging enabled. bone_ether_interface : couldn't register interface bone_datalink: load_interface(network/interfaces/bone_ether) failed trbone_ying to unload /etboot/beos/system/lib/libhenet.so r_interface: uninit requesttrying to unload /boot/beos/system/lib/libbind.so bone_util: loading stack 1 2 24 0 trying to unload /boot/beos/system/lib/libsocket.so trying to unload /boot/beos/system/lib/libnet.so trying to unload /boot/beos/system/lib/libbind.so trying to unload /boot/beos/system/lib/libsocket.so trying to unload /boot/beos/system/lib/libnet.so trying to unload /boot/beos/system/lib/libbind.so trying to unload /boot/beos/system/lib/libsocket.so trying to unload /boot/beos/system/lib/libnet.so trying to unload /boot/beos/system/lib/libbind.so trying to unload /boot/beos/system/lib/libsocket.so bone_notify.c 518 (in notify_receive_data): data len > 0 trying to unload /boot/beos/system/lib/libnet.so trying to unload /boot/beos/system/lib/libbind.so trying to unload /boot/beos/system/lib/libsocket.so trying to unload /boot/beos/system/lib/libnet.so trying to unload /boot/beos/system/lib/libbind.so trying to unload /boot/beos/system/lib/libsocket.so trying to unload /boot/beos/system/lib/libnet.so trying to unload /boot/beos/system/lib/libbind.so trying to unload /boot/beos/system/lib/libsocket.so trying to unload /boot/beos/system/lib/libnet.so trying to unload /boot/beos/system/lib/libbind.so trying to unload /boot/beos/system/lib/libsocket.so IDE -- init_v06: bone_util: cache_family(4): found sections - in = 0, out = 0x02676a70, dl = 0 IDE PCI - intwait: timeout - status: 0x50, bm-status: 0x24 regs: 0x00, 0x02, 0x18, 0x00, 0x02, 0x27 bone_util: loading stack 4 1 2 0 IDE ATAPI -- request_sense: no media, ascq 00 IDE ATAPI -- configure_device: drive dma mode: 0x12 KERNEL: can't find library libavcodec.so bone_peeper: remove_peeper() called with unregistered peeper bone_util: free_family_cache(): unloading address family 4 symbios: sim_install() adaptec: sim_install() scsi_cam: path=0, devcount=8 symbios: sim_install() adaptec: sim_install() BeOS PCMCIA Card Services 3.0.14 options: [pci] [cardbus] bone_util: loading stack 1 1 255 1 scsi_cam: path 0 slack... trying to unload /boot/beos/system/lib/libtracker.so Intel PCIC probe: SCSI -- get_bios_driveinfo: all bios drives match other devices not found. KERNEL: can't find library libavcodec.so SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices init_driver: dp83815 not found SCSI -- get_bios_driveinfo: all bios drives match other devices 3c9xx(B) Be99H-WOL 2/24/99 Found 3Com Vortex/Boomerang cards found.2147454969 SCSI -- get_bios_driveinfo: all bios drives match other devices generic: no hardware found SCSI -- get_bios_driveinfo: all bios drives match other devices <6>eepro100.c v1:v1 generic: no hardware found SCSI -- get_bios_driveinfo: all bios drives match other devices SCSI -- get_bios_driveinfo: all bios drives match other devices BeOS PCMCIA Card Services 3.0.14 1394 bus manager: Error in get_module(busses/1394/aic5800/v1) options: [pci] [cardbus] ohci: OHCI: May 26 2000 12:30:29 *** apm_init apm_info @ 0x0x0100bc10 (48:4fd4) APM: CS32 base 0xf000, size 0x2294 APM: CS16 base 0xf000, size 0x2294 APM: DS base 0x0, size 0x6afa Intel PCIC probe: 1394 bus manager: APM_CS32 done Error in get_module(busses/1394/ohci/v1) not found. 1394 bus manager: APM_CS16 done No 1394 busses found unable to get 1394 module APM: mapping dseg area: 0(6afa) as 0(7000) mapped at 0x3a7b0000 APM_DS done APM: setting driver version to 1.2 APM: enabling power management emu10k: init_hardware() emu10k: init_driver() APM: engaging power management homelan get_pci_list 0 entries init_driver: homelan not found lm78: init_hardware() lm78: init_driver() lm78: uninit_driver() BeOS PCMCIA Card Services 3.0.14 options: [pci] [cardbus] awe64: init_hardware() awe64: init_driver() awe64: manual settings == 0x0 awe64: manual disabled Intel PCIC probe: not found. cs4236: init_driver() netmate: init_hardware() netmate: May 11 2001 06:00:16, init_driver() netmate: loaded symbols netmate: init_driver() done publish_devices() netmate opti931: init_hardware() opti931: init_driver() netmate: uninit_driver() netmate: uninit_driver() done BeOS PCMCIA Card Services 3.0.14 options: [pci] [cardbus] ymf715: init_driver() Intel PCIC probe: not found. PATH = /boot/apps/ProcessController, addon_id = 716 ||| init: returning 0 func_name = Instantiate__17ProcessControllerP8BMessage, err = No Error pc_init_card failed ffffffff rtl8139 found at IRQ 5 rtl8139: Init Ok. Found 1 devices. rtl8139: publish_devices() LOADER: system add-on /boot/home/config/add-ons/kernel/drivers/bin/ich_ac97 linking against kernel.so! sonorus: init_hardware() 12:39:21 May 26 2000 bone_ether_interface: init successful for /dev/net/rtl8139/0 bone_util: loading stack 1 2 6 0 bone_arp: BONE arp module loaded. This module contains the following data protocol sub-modules: * ipv4 (default) - address resolution for IPv4 addresses bone_ether_frame: BONE ethernet framing module loaded. This module contains the following datalink protocol sub-modules: * ethernet2 (default) - Ethernet II framing module * SNAP - 802.2/SNAP framing module * 802.2 - raw 802.2 framing module (supports IPX only) * 802.3 - raw 802.3 framing module (supports IPX only) bone_notify.c 518 (in notify_receive_data): data len > 0 bone_notify.c 518 (in notify_receive_data): data len > 0 bone_notify.c 518 (in notify_receive_data): data len > 0 bone_notify.c 518 (in notify_receive_data): data len > 0 rtl8139 found at IRQ 5 rtl8139: Init Ok. Found 1 devices. rtl8139: find_device() net/rtl8139/0 rtl8139: Ethernet address: 00:e0:29:5a:dc:1d unknown iocontrol 2717 bone_arp: protocol address 1:0a00000a is also being used by another host! bone_notify.c 518 (in notify_receive_data): data len > 0 bone_util: cache_family(4): found sections - in = 0, out = 0x030ff358, dl = 0 bone_util: loading stack 4 1 2 0 bone_peeper: remove_peeper() called with unregistered peeper bone_util: free_family_cache(): unloading address family 4 bone_notify.c 518 (in notify_receive_data): data len > 0 bone_notify.c 518 (in notify_receive_data): data len > 0 bone_notify.c 518 (in notify_receive_data): data len > 0 bone_notify.c 518 (in notify_receive_data): data len > 0 bone_util: cache_family(4): found sections - in = 0, out = 0x02573a78, dl = 0 bone_util: loading stack 4 1 2 0 bone_peeper: remove_peeper() called with unregistered peeper bone_util: free_family_cache(): unloading address family 4 IDE -- uninit: floppy uninit() flo_init: cyl_map[0].address = 0x00001000 size = 00004800 flo_init: cyl_map[1].address = 0 size = 00000000 IDE -- init_v06: IDE PCI - intwait: timeout - status: 0x50, bm-status: 0x24 regs: 0x00, 0x02, 0x18, 0x00, 0x02, 0x6e IDE ATAPI -- request_sense: no media, ascq 00 IDE ATAPI -- configure_device: drive dma mode: 0x12 publish_command(usb_dsk): start not known Problems in uhci finish thread : segment violation address: 0x80233070, op: 1 pc: 0x00175563, tmid: 2 thid: 10 kernel debugger: Welcome to Kernel Debugging Land... eax 00000000 ebp 0122c944 cs 0008 | area 004b3768 (kernel_intel_text) ebx 00000040 esp 0122c8f8 ss 0010 | addr 00100000 size 00086000 ecx 00000040 edi 300f6600 ds 0010 | edx 00000000 esi 80233070 es 0010 | Thread: uhci finish thread eip 00175563 flag 00010246 fs 0000 | Team: kernel_team trap 0000000e err 00000000 gs 0000 | Stack Trace follows: 00000000 00175563 memcpy_pIII+0047 0122c944 0021a012 CreateFilledTransfer__4UHCIP8TransferPP7uhci_tdPP7uhci_qh+00aa 0122c984 002196ef FinishTransfers__4UHCI+0387 0122c9e4 0021935f FinishThread__4UHCIPv+001f