options = 1 APM version 1.2 available, flags 7. smp: using ACPI to detect MP configuration smp: local apic address is 0xfee00000 smp: found local APIC with id 0 smp: found local APIC with id 1 smp: found io APIC with id 2 and address 0xfec00000 VESA version = 3.0, capabilities 1 OEM string: Matrox Graphics Inc. 0x101: 640 x 480 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x110: 640 x 480 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 1 0x111: 640 x 480 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 1 0x112: 640 x 480 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 1 0x100: 640 x 400 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x102: 800 x 600 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x103: 800 x 600 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x113: 800 x 600 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 1 0x114: 800 x 600 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 1 0x115: 800 x 600 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 1 0x105: 1024 x 768 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x116: 1024 x 768 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 1 0x117: 1024 x 768 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 1 0x118: 1024 x 768 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 1 0x107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 0x119: 1280 x 1024 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 1 0x11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 1 0x11b: 1280 x 1024 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 1 0x10a: 132 x 43 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1) mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 Using mode 0x118 VESA compatible graphics! EDID1: 4f EDID2: ebx 102 EDID3: 4f Vendor: FUS Product ID: 1706 Serial #: 37506 Produced in week/year: 6/2009 EDID version: 1.3 Type: Analog Size: 34 cm x 27 cm Gamma=2.2 White (X,Y)=(0.313,0.329) Supported Future Video Modes: 1280x1024@60Hz (id=32897) Supported VESA Video Modes: 720x400@70Hz 640x480@60Hz 640x480@75Hz 800x600@60Hz 800x600@75Hz 1024x768@60Hz 1024x768@75Hz 1280x1024@75Hz Additional Video Mode (1280x1024@60Hz): clock=108 MHz h: (1280, 1328, 1440, 1688) v: (1024, 1025, 1028, 1066) size: 33.8 cm x 27 cm border: 0 cm x 0 cm Horizontal frequency range = 30..82 kHz Vertical frequency range = 56..76 Hz Maximum pixel clock = 140 MHz Monitor Name: B17-5 Serial Number: YE6L037506 crtc: h 1328/1440/1688, v 1025/1028/1066, pixel clock 108000000, refresh 6064 Welcome to the Haiku boot loader! number of drives: 2 add_partitions_for(0x001053a0, mountFS = no) add_partitions_for(fd = 0, mountFS = no) 0x001055c8 Partition::Partition 0x001055c8 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map priority: 810 check for partitioning_system: Intel Extended Partition 0x00105740 Partition::Partition 0x001055c8 Partition::AddChild 0x00105740 0x00105740 Partition::SetParent 0x001055c8 new child partition! 0x00105800 Partition::Partition 0x001055c8 Partition::AddChild 0x00105800 0x00105800 Partition::SetParent 0x001055c8 new child partition! 0x001058c0 Partition::Partition 0x001055c8 Partition::AddChild 0x001058c0 0x001058c0 Partition::SetParent 0x001055c8 new child partition! 0x00105980 Partition::Partition 0x001055c8 Partition::AddChild 0x00105980 0x00105980 Partition::SetParent 0x001055c8 new child partition! 0x001055c8 Partition::Scan(): scan child 0x00105740 (start = 32768, size = 42949 67296, parent = 0x001055c8)! 0x00105740 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition 0x001055c8 Partition::Scan(): scan child 0x00105800 (start = 4295000064, size = 4294967296, parent = 0x001055c8)! 0x00105800 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition 0x001055c8 Partition::Scan(): scan child 0x001058c0 (start = 8589967360, size = 4294967296, parent = 0x001055c8)! 0x001058c0 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition 0x001055c8 Partition::Scan(): scan child 0x00105980 (start = 12884934656, size = 17852936704, parent = 0x001055c8)! 0x00105980 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition 0x001055c8 Partition::~Partition 0x00105740 Partition::SetParent 0x00000000 0x00105800 Partition::SetParent 0x00000000 0x001058c0 Partition::SetParent 0x00000000 0x00105980 Partition::SetParent 0x00000000 boot partition offset: 32768 0x00105740 Partition::_Mount check for file_system: BFS Filesystem PackageVolumeInfo::SetTo() old state directory "state_2015-07-29_18:13:42" old state directory "state_2015-07-29_18:16:21" old state directory "state_2015-07-29_20:31:46" 0x00105800 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map priority: 500 check for partitioning_system: Intel Extended Partition 0x00105800 Partition::_Mount check for file_system: BFS Filesystem 0x001058c0 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map priority: 500 check for partitioning_system: Intel Extended Partition 0x001058c0 Partition::_Mount check for file_system: BFS Filesystem 0x00105980 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition 0x00105980 Partition::_Mount check for file_system: BFS Filesystem add_partitions_for(0x00105460, mountFS = yes) add_partitions_for(fd = 6, mountFS = yes) 0x00106a50 Partition::Partition 0x00106a50 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map priority: 810 check for partitioning_system: Intel Extended Partition 0x0010b4c0 Partition::Partition 0x00106a50 Partition::AddChild 0x0010b4c0 0x0010b4c0 Partition::SetParent 0x00106a50 new child partition! 0x00107170 Partition::Partition 0x00106a50 Partition::AddChild 0x00107170 0x00107170 Partition::SetParent 0x00106a50 new child partition! 0x00106a50 Partition::Scan(): scan child 0x0010b4c0 (start = 8225280, size = 214 6798080, parent = 0x00106a50)! 0x0010b4c0 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition 0x0010b4c0 Partition::_Mount check for file_system: BFS Filesystem 0x0010b4c0 Partition::_Mount check for file_system: FAT32 Filesystem 0x00106a50 Partition::Scan(): scan child 0x00107170 (start = 2155023360, size = 31659102720, parent = 0x00106a50)! 0x00107170 Partition::Scan() check for partitioning_system: GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition 0x00107170 Partition::_Mount check for file_system: BFS Filesystem 0x00106a50 Partition::~Partition 0x0010b4c0 Partition::SetParent 0x00000000 0x00107170 Partition::SetParent 0x00000000 load kernel kernel_x86... video mode: 1280x1024x32 maximum boot loader heap usage: 486512, currently used: 478984 smp: found 2 cpus smp: apic_phys = 0xfee00000 smp: ioapic_phys = 0xfec00000 smp: apic (mapped) = 0x81a23000 APIC ticks/sec = 66809334 trampolining other cpus wait for delivery deassert INIT wait for delivery num startups = 2 send STARTUP wait for delivery send STARTUP wait for delivery done trampolining kernel entry at 800633c8 Welcome to kernel debugger output! Haiku revision: hrev49409 reserve_io_interrupt_vectors: reserved 2 vectors starting from 98 CPU 0: type 0 family 6 extended_family 0 model 6 extended_model 0 stepping 5, st ring 'GenuineIntel' No CPU topology information available. CPU 0: apic id 0, package 0, core 0, smt 0 CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov p at pse36 mmx fxsr reserve_io_interrupt_vectors: reserved 16 vectors starting from 0 using 32 bit paging (PAE not needed) mark_page_range_in_use(0x0, 0x100): start page is before free list mark_page_range_in_use(0x0, 0xa0): start page is before free list add_memory_type_range(4, 0x0, 0xa0000, 6) add_memory_type_range(5, 0xe0000, 0x20000, 6) add_memory_type_range(86, 0xd8000000, 0x500000, 0) mapping local apic at 0x81a23000 add_memory_type_range(89, 0xfee00000, 0x1000, 0) CPU 1: type 0 family 6 extended_family 0 model 6 extended_model 0 stepping 5, st ring 'GenuineIntel' CPU 1: apic id 1, package 1, core 0, smt 0 CPU 1: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov p at pse36 mmx fxsr setting up apic for CPU 0: apic id 0, version 262161 CPU 0: logical apic id: 0x1 x86_init_fpu: CPU has no SSE... just enabling FPU. reserve_io_interrupt_vectors: reserved 3 vectors starting from 221 reserve_io_interrupt_vectors: reserved 1 vectors starting from 219 arch_init_timer: using APIC timer. allocate_commpage_entry(2, 12) -> 0x00000100 scheduler_init: found 2 logical cpus and 0 cache levels scheduler switches: single core: false, cpu load tracking: false, core load trac king: true scheduler: switching to low latency mode apm_init() code32: 0xf000, 0x8130, length 0x0 code16: 0xf000, length 0x0 data: 0xfdfa, length 0x0 msi support enabled PCI: pci_module_init add_memory_type_range(95, 0x0, 0x1000, 0) remove_memory_type_range(95, 0x0, 0x1000, 0) add_memory_type_range(96, 0x9f000, 0x1000, 0) remove_memory_type_range(96, 0x9f000, 0x1000, 0) add_memory_type_range(97, 0xe0000, 0x20000, 0) add_memory_type_range(98, 0x27ff3000, 0x1000, 0) remove_memory_type_range(98, 0x27ff3000, 0x1000, 0) add_memory_type_range(99, 0x27ff3000, 0x1000, 0) remove_memory_type_range(97, 0xe0000, 0x20000, 0) add_memory_type_range(100, 0x27ff3000, 0x1000, 0) remove_memory_type_range(100, 0x27ff3000, 0x1000, 0) add_memory_type_range(101, 0x27ff5000, 0x1000, 0) remove_memory_type_range(101, 0x27ff5000, 0x1000, 0) PCI: mechanism 1 controller found PCI: FixupDevices: checking bus 1 behind 8086:7191 PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0088 to 0x0 089 PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7190, revision 03 PCI: class_base 06, class_function 00, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7190: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge PCI: info: Bridge (Host bridge) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host d0000000, pci d0000000, size 04000000, flags 08 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: AGP PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7191, revision 03 PCI: class_base 06, class_function 04, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7191: 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge PCI: info: Bridge (PCI bridge, Normal decode) PCI: line_size 00, latency 40, header_type 01, BIST 00 PCI: subsystem_id 0000, subsystem_vendor_id 0000 PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 2 0 PCI: I/O window f000-0fff PCI: memory window d4000000-d7ffffff PCI: prefetchable memory window 00000000d8000000-00000000d9ffffff PCI: bridge_control 0089, secondary_status 02a0 PCI: interrupt_line 00, interrupt_pin 00 PCI: ROM base host 00000000, pci 00000000, size ?? PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 1] bus 1, device 0, function 0: vendor 102b, device 0525, revision 03 PCI: class_base 03, class_function 00, class_api 00 PCI: vendor 102b: Matrox Electronics Systems Ltd. PCI: device 0525: MGA G400/G450 (Millennium G400 32Mb SGRAM) PCI: info: Display controller (VGA compatible controller, VGA controller) PCI: line_size 08, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00010000 PCI: cardbus_CIS 00000000, subsystem_id 19f8, subsystem_vendor_id 102b PCI: interrupt_line 0a, interrupt_pin 01, min_grant 10, max_latency 20 PCI: base reg 0: host d8000000, pci d8000000, size 02000000, flags 08 PCI: base reg 1: host d4000000, pci d4000000, size 00004000, flags 00 PCI: base reg 2: host d5000000, pci d5000000, size 00800000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, AGP PCI: [dom 0, bus 0] bus 0, device 7, function 0: vendor 8086, device 7110, revision 02 PCI: class_base 06, class_function 01, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7110: 82371AB/EB/MB PIIX4 ISA PCI: info: Bridge (ISA bridge) PCI: line_size 00, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 1: vendor 8086, device 7111, revision 01 PCI: class_base 01, class_function 01, class_api 80 PCI: vendor 8086: Intel Corporation PCI: device 7111: 82371AB/EB/MB PIIX4 IDE PCI: info: Mass storage controller (IDE interface) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 0000f000, pci 0000f000, size 00000010, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 2: vendor 8086, device 7112, revision 01 PCI: class_base 0c, class_function 03, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7112: 82371AB/EB/MB PIIX4 USB PCI: info: Serial bus controller (USB controller, UHCI) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 0c, interrupt_pin 04, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00009000, pci 00009000, size 00000020, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 3: vendor 8086, device 7113, revision 02 PCI: class_base 06, class_function 80, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI PCI: info: Bridge PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 9, function 0: vendor 10ec, device 8139, revision 10 PCI: class_base 02, class_function 00, class_api 00 PCI: vendor 10ec: Realtek Semiconductor Co., Ltd. PCI: device 8139: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (RTL-8100/8101 L/8139 PCI Fast Ethernet Adapter) PCI: info: Network controller (Ethernet controller) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 8139, subsystem_vendor_id 10ec PCI: interrupt_line 0c, interrupt_pin 01, min_grant 20, max_latency 40 PCI: base reg 0: host 00009400, pci 00009400, size 00000100, flags 01 PCI: base reg 1: host db000000, pci db000000, size 00000100, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 15, function 0: vendor 125d, device 1969, revision 02 PCI: class_base 04, class_function 01, class_api 00 PCI: vendor 125d: ESS Technology PCI: device 1969: ES1938/ES1946/ES1969 Solo-1 Audiodrive PCI: info: Multimedia controller (Multimedia audio controller) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 8898, subsystem_vendor_id 125d PCI: interrupt_line 0a, interrupt_pin 01, min_grant 02, max_latency 18 PCI: base reg 0: host 00009800, pci 00009800, size 00000040, flags 01 PCI: base reg 1: host 00009c00, pci 00009c00, size 00000010, flags 01 PCI: base reg 2: host 0000a000, pci 0000a000, size 00000010, flags 01 PCI: base reg 3: host 0000a400, pci 0000a400, size 00000004, flags 01 PCI: base reg 4: host 0000a800, pci 0000a800, size 00000004, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM PCI: [dom 0, bus 0] bus 0, device 19, function 0: vendor 1103, device 0004, revision 01 PCI: class_base 01, class_function 80, class_api 00 PCI: vendor 1103: HighPoint Technologies, Inc. PCI: device 0004: HPT366/368/370/370A/372/372N PCI: info: Mass storage controller PCI: line_size 08, latency f8, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00020000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 0b, interrupt_pin 01, min_grant 08, max_latency 08 PCI: base reg 0: host 0000ac00, pci 0000ac00, size 00000008, flags 01 PCI: base reg 1: host 0000b000, pci 0000b000, size 00000004, flags 01 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 0000b400, pci 0000b400, size 00000100, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 19, function 1: vendor 1103, device 0004, revision 01 PCI: class_base 01, class_function 80, class_api 00 PCI: vendor 1103: HighPoint Technologies, Inc. PCI: device 0004: HPT366/368/370/370A/372/372N PCI: info: Mass storage controller PCI: line_size 08, latency f8, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 0b, interrupt_pin 02, min_grant 08, max_latency 08 PCI: base reg 0: host 0000b800, pci 0000b800, size 00000008, flags 01 PCI: base reg 1: host 0000bc00, pci 0000bc00, size 00000004, flags 01 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 0000c000, pci 0000c000, size 00000100, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) add_memory_type_range(103, 0x0, 0x1000, 0) remove_memory_type_range(103, 0x0, 0x1000, 0) add_memory_type_range(104, 0xe0000, 0x20000, 0) remove_memory_type_range(104, 0xe0000, 0x20000, 0) add_memory_type_range(105, 0xf7000, 0x1000, 0) ACPI: RSDP 0x000F7370 000014 (v00 ABIT ) remove_memory_type_range(105, 0xf7000, 0x1000, 0) add_memory_type_range(106, 0x27ff3000, 0x1000, 0) ACPI: RSDT 0x27FF3000 00002C (v01 ABIT AWRDACPI 42302E31 AWRD 00000000) remove_memory_type_range(106, 0x27ff3000, 0x1000, 0) add_memory_type_range(107, 0x27ff3000, 0x1000, 0) add_memory_type_range(108, 0x27ff3000, 0x1000, 0) remove_memory_type_range(108, 0x27ff3000, 0x1000, 0) add_memory_type_range(109, 0x27ff3000, 0x1000, 0) ACPI: FACP 0x27FF3040 000074 (v01 ABIT AWRDACPI 42302E31 AWRD 00000000) remove_memory_type_range(109, 0x27ff3000, 0x1000, 0) add_memory_type_range(110, 0x27ff3000, 0x1000, 0) remove_memory_type_range(110, 0x27ff3000, 0x1000, 0) add_memory_type_range(111, 0x27ff3000, 0x1000, 0) remove_memory_type_range(111, 0x27ff3000, 0x1000, 0) add_memory_type_range(112, 0x27ff3000, 0x3000, 0) ACPI: DSDT 0x27FF30C0 0023DF (v01 ABIT AWRDACPI 00001000 MSFT 0100000C) remove_memory_type_range(112, 0x27ff3000, 0x3000, 0) add_memory_type_range(113, 0x27ff0000, 0x1000, 0) remove_memory_type_range(113, 0x27ff0000, 0x1000, 0) add_memory_type_range(114, 0x27ff0000, 0x1000, 0) ACPI: FACS 0x27FF0000 000040 remove_memory_type_range(114, 0x27ff0000, 0x1000, 0) add_memory_type_range(115, 0x27ff5000, 0x1000, 0) remove_memory_type_range(115, 0x27ff5000, 0x1000, 0) add_memory_type_range(116, 0x27ff5000, 0x1000, 0) ACPI: APIC 0x27FF54C0 00005C (v01 ABIT 00000000 00000000) remove_memory_type_range(116, 0x27ff5000, 0x1000, 0) remove_memory_type_range(107, 0x27ff3000, 0x1000, 0) add_memory_type_range(117, 0x27ff3000, 0x3000, 0) remove_memory_type_range(117, 0x27ff3000, 0x3000, 0) ACPI: Forced DSDT copy: length 0x023DF copied locally, original unmapped ACPI: All ACPI Tables successfully acquired add_memory_type_range(118, 0x27ff0000, 0x1000, 0) ACPI Error: [\_PR_.CPU0] Namespace lookup failure, AE_NOT_FOUND (20140724/dsobje ct-209) ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [_PSL] (Package) ( 20140724/nsinit-459) add_memory_type_range(119, 0xff000, 0x1000, 0) add_memory_type_range(120, 0x27ff5000, 0x1000, 0) found io-apic with address 0xfec00000, global interrupt base 0, apic-id 2 mapping io-apic 0 at physical address 0xfec00000 add_memory_type_range(121, 0xfec00000, 0x1000, 0) io-apic 0 has range 0-23, 24 entries, version 0x00170011, apic-id 2 setting ACPI interrupt model to APIC calculated irq routing entry: address 0xffff; pin 0; GSI 16; pci 1:0 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06 IRQ routing table with 6 entries address 0xfffff; pin 0; GSI 16; pci 0:15 pin 1 func mask 1; bios irq: 10; gsi 16 ; config 0x06 address 0x13ffff; pin 0; GSI 18; pci 0:19 pin 1 func mask 1; bios irq: 11; gsi 1 8; config 0x06 address 0x13ffff; pin 1; GSI 18; pci 0:19 pin 2 func mask 2; bios irq: 11; gsi 1 8; config 0x06 address 0x9ffff; pin 0; GSI 19; pci 0:9 pin 1 func mask 1; bios irq: 12; gsi 19; config 0x06 address 0x7ffff; pin 3; GSI 19; pci 0:7 pin 4 func mask 4; bios irq: 12; gsi 19; config 0x06 address 0xffff; pin 0; GSI 16; pci 1:0 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06 found interrupt override for bus 0, source irq 0, global irq 2, flags 0x00000004 found interrupt override for bus 0, source irq 9, global irq 9, flags 0x00000000 free_io_interrupt_vectors: freeing 16 vectors starting from 0 reserve_io_interrupt_vectors: reserved 24 vectors starting from 0 using io-apics for interrupt routing setting up apic for CPU 1: apic id 1, version 262161 CPU 1: logical apic id: 0x2 x86_init_fpu: CPU has no SSE... just enabling FPU. slab memory manager: created area 0x80801000 (132) initialize_commpage_syscall(): sysenter/sysexit supported allocate_commpage_entry(3, 5) -> 0x00000110 allocate_commpage_entry(4, 34) -> 0x00000118 allocate_commpage_entry(5, 74) -> 0x00000140 allocate_commpage_entry(6, 86) -> 0x00000190 allocate_commpage_entry(7, 97) -> 0x000001e8 publish device: node 0x8281cb40, path acpi/namespace, module bus_managers/acpi/n amespace/device_v1 registering power button add_memory_type_range(248, 0xff000, 0x1000, 0) module: Search for busses/usb/xhci failed. usb uhci -1: successfully started the controller usb ohci: no devices found usb ehci: no devices found usb hub 2: port 0: new device connected usb hub 8: port 0: new device connected usb hub 8: port 2: new device connected get_boot_partitions(): boot volume message: KMessage: buffer: 0x81a17058 (size/capacity: 347/347), flags: 0xa field: "booted from image" (BOOL): false field: "partition offset" (LLNG): 32768 (0x8000) field: "packaged" (BOOL): true field: "boot method" (LONG): 0 (0x0) field: "boot drive number" (LLNG): 128 (0x80) field: "disk identifier" (RAWT): data at 0x81a17164, 79 bytes get_boot_partitions(): boot method type: 0 partitioning system: partitioning_systems/intel/extended/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1) intel: ep_std_ops(0x1) intel: ep_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error partitioning system: partitioning_systems/intel/map/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1) intel: pm_std_ops(0x1) intel: pm_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error partitioning system: partitioning_systems/efi_gpt/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/efi_gpt/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/devfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/packagefs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/packagefs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/rootfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/bfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error number of disk systems: 7 KDiskDeviceManager::_Scan(/dev/disk) PCI-ATA: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14 PCI-ATA: init channel... PCI-ATA: channel index 0 PCI-ATA: bus master base 0xc000 PCI-ATA: init channel done ata 0: _DevicePresent: device 0, presence 1 ata 0: _DevicePresent: device 1, presence 1 ata 0: deviceMask 3 ata 0: probing device 0 ata 0: signature of device 0: 0x0000 ata 0-0: model number: IBM-DTLA-305030 ata 0-0: serial number: YGEYG0E6423 ata 0-0: firmware rev.: TW3FA60A ata 0-0: using DMA mode 0x12 ata 0: identified ATA device 0 ata 0: probing device 1 ata 0 error: device 1 failed, error code is 0x00 ata 0: signature of device 1: 0x0000 ata 0 error: device ready not set ata 0-1 error: sending identify request failed ata 0 error: command failed, error bit is set. status 0x51, error 0x04 publish device: node 0x82b559e8, path disk/ata/0/master/raw, module drivers/disk /scsi/scsi_disk/device_v1 ata 0-0 error: invalid target lun 1 for ATA device ata 0-0 error: invalid target lun 2 for ATA device ata 0-0 error: invalid target lun 3 for ATA device ata 0-0 error: invalid target lun 4 for ATA device ata 0-0 error: invalid target lun 5 for ATA device ata 0-0 error: invalid target lun 6 for ATA device ata 0-0 error: invalid target lun 7 for ATA device ata 0 error: target device not present ata 0 error: invalid target device Last message repeated 12 times. PCI-ATA: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15 PCI-ATA: init channel... PCI-ATA: channel index 1 PCI-ATA: bus master base 0xc008 PCI-ATA: init channel done ata 1: _DevicePresent: device 0, presence 1 ata 1: _DevicePresent: device 1, presence 1 ata 1: deviceMask 3 ata 1: probing device 0 ata 1: signature of device 0: 0xeb14 atapi 1-0: model number: SONY CD-RW CRX140E atapi 1-0: serial number: z atapi 1-0: firmware rev.: 1.2a atapi 1-0: using DMA mode 0x12 ata 1: identified ATAPI device 0 ata 1: probing device 1 ata 1: signature of device 1: 0x0000 ata 1-1: model number: SAMSUNG SV0602H ata 1-1: serial number: 0451J1FTC14017 ata 1-1: firmware rev.: RH100-15 ata 1-1: using DMA mode 0x12 ata 1: identified ATA device 1 publish device: node 0x82b55768, path disk/atapi/1/master/raw, module drivers/di sk/scsi/scsi_cd/device_v1 atapi 1-0 error: invalid target lun 1 atapi 1-0 error: invalid target lun 2 atapi 1-0 error: invalid target lun 3 atapi 1-0 error: invalid target lun 4 atapi 1-0 error: invalid target lun 5 atapi 1-0 error: invalid target lun 6 atapi 1-0 error: invalid target lun 7 ata 1 error: command failed, error bit is set. status 0x51, error 0x04 publish device: node 0x82b55678, path disk/ata/1/slave/raw, module drivers/disk/ scsi/scsi_disk/device_v1 ata 1-1 error: invalid target lun 1 for ATA device ata 1-1 error: invalid target lun 2 for ATA device ata 1-1 error: invalid target lun 3 for ATA device ata 1-1 error: invalid target lun 4 for ATA device ata 1-1 error: invalid target lun 5 for ATA device ata 1-1 error: invalid target lun 6 for ATA device ata 1-1 error: invalid target lun 7 for ATA device ata 1 error: invalid target device Last message repeated 12 times. PCI-ATA: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14 PCI-ATA: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15 PCI-ATA: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14 PCI-ATA: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15 KDiskDeviceManager::_Scan(/dev/disk/ata) KDiskDeviceManager::_Scan(/dev/disk/ata/0) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw) found device: /dev/disk/ata/0/master/raw DMAResource@0x8280ab80: low/high 0/100000000, max segment count 512, align 2, bo undary 65536, max transfer 131072, max segment size 33554432 slab memory manager: created area 0xce001000 (313) slab memory manager: created area 0xce801000 (314) KDiskDeviceManager::_Scan(/dev/disk/ata/1) KDiskDeviceManager::_Scan(/dev/disk/ata/1/slave) KDiskDeviceManager::_Scan(/dev/disk/ata/1/slave/raw) found device: /dev/disk/ata/1/slave/raw DMAResource@0x8280aa00: low/high 0/100000000, max segment count 512, align 2, bo undary 65536, max transfer 131072, max segment size 33554432 slab memory manager: created area 0xcf001000 (349) KDiskDeviceManager::_Scan(/dev/disk/atapi) KDiskDeviceManager::_Scan(/dev/disk/atapi/1) KDiskDeviceManager::_Scan(/dev/disk/atapi/1/master) KDiskDeviceManager::_Scan(/dev/disk/atapi/1/master/raw) found device: /dev/disk/atapi/1/master/raw KDiskDeviceManager::_ScanPartition(/dev/disk/ata/0/master/raw) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 intel: ep_std_ops(0x2) intel: pm_std_ops(0x1) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 0: 0, 30738677760, 512) ata 0 error: timeout waiting for interrupt ata 0 error: RecoverLostInterrupt: device busy, status 0x58 check_sense: Hardware error ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout returned: -1 intel: pm_std_ops(0x2) trying: partitioning_systems/efi_gpt/v1 ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout returned: -1 KDiskDeviceManager::_ScanPartition(/dev/disk/ata/1/slave/raw) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 intel: ep_std_ops(0x2) intel: pm_std_ops(0x1) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 1: 0, 33820286976, 512) ata 1 error: timeout waiting for interrupt ata 1 error: RecoverLostInterrupt: device busy, status 0x58 ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout returned: -1 intel: pm_std_ops(0x2) trying: partitioning_systems/efi_gpt/v1 ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/packagefs/v1 returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/bfs/v1 ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout returned: -1 device 0: /dev/disk/ata/0/master/raw media status: No error device flags: 2 offset: 0 size: 30738677760 (29314.687 MB) content size: 0 block size: 512 child count: 0 index: -1 status: 2 flags: 1 volume: -1 disk system: name: IBM-DTLA-305030 content name: type: content type: params: content params: device 1: /dev/disk/ata/1/slave/raw media status: No error device flags: 2 offset: 0 size: 33820286976 (32253.539 MB) content size: 0 block size: 512 child count: 0 index: -1 status: 2 flags: 1 volume: -1 disk system: name: SAMSUNG SV0602H content name: type: content type: params: content params: device 2: /dev/disk/atapi/1/master/raw media status: No media present device flags: 5 ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request ata 0 error: device selection timeout ata 0-0 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request ata 1 error: device selection timeout ata 1-1 error: failed to send transfer request das_read(): request.Wait() returned: Device timeout PANIC: did not find any boot partitions! Welcome to Kernel Debugging Land... Thread 16 "main2" running on CPU 0 stack trace for thread 16 "main2" kernel stack: 0x81a5f000 to 0x81a63000 frame caller :function + offset 0 81a629b8 (+ 32) 801455e2 arch_debug_stack_trace() + 0x12 1 81a629d8 (+ 16) 800a4c8f stack_trace_trampoline__FPv() + 0x0b 2 81a629e8 (+ 12) 8013738e arch_debug_call_with_fault_handler() + 0x1b 3 81a629f4 (+ 48) 800a67fa debug_call_with_fault_handler() + 0x 5a 4 81a62a24 (+ 64) 800a4eab kernel_debugger_loop__FPCcT0Pcl() + 0x217 5 81a62a64 (+ 48) 800a5227 kernel_debugger_internal__FPCcT0Pcl( ) + 0x53 6 81a62a94 (+ 48) 800a6b82 panic() + 0x3a 7 81a62ac4 (+1168) 800fe190 vfs_mount_boot_file_system() + 0x80 8 81a62f54 (+ 96) 800637fd main2__FPv() + 0xad 9 81a62fb4 (+ 48) 80084363 common_thread_entry__FPv() + 0x3b