Welcome to the Haiku shell. ~> cdrecord -scanbus Cdrecord-ProDVD-ProBD-Clone 3.02a06 (i586-pc-haiku) Copyright (C) 1995-2016 Joerg Schilling Using libscg version 'schily-0.9'. scsibus0: 0,0,0 0) '' '' '' NON CCS Disk 0,1,0 1) 'HL-DT-ST' 'DVD+-RW GH50N ' 'B104' Removable CD-ROM 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * ~> cdrecord dev=0,1,0 blank=all -v speed=4 -force -eject Cdrecord-ProDVD-ProBD-Clone 3.02a06 (i586-pc-haiku) Copyright (C) 1995-2016 Joerg Schilling TOC Type: 1 = CD-ROM cdrecord: WARNING: Cannot set priority on this OS. cdrecord: WARNING: This causes a high risk for buffer underruns. scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 Using libscg version 'schily-0.9'. SCSI buffer size: 64512 atapi: -1 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVD+-RW GH50N ' Revision : 'B104' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: CD-RW Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD+R/DL Profile: DVD-ROM Profile: CD-R Profile: CD-RW (current) Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYER_JUMP Drive buf size : 1053696 = 1029 KB Drive pbuf size: 1966080 = 1920 KB cdrecord: Warning: DMA resid 0 for 'read buffer', actual data is too short. cdrecord: Warning: The DMA speed test has been skipped. Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Reference speed: 2 Disk Is not unrestricted Disk Is erasable ATIP start of lead in: -11078 (97:34/22) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 0 (reserved val 0) 1T speed high: 4 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12) power mult factor: 3 5 recommended erase/write power: 3 A1 values: 02 3A B0 A2 values: 5C C6 26 Disk type: Phase change Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Capacity Blklen/Sparesz. Format-type Type 0 2048 0x00 No Media Present or Unknown Capacity Waiting for drive to calm down. Starting to write CD/DVD/BD at speed 4 in real force BLANK mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. cdrecord: blank unit: scsi sendcmd: retryable error CDB: A1 00 00 00 00 00 00 00 00 00 00 00 status: 0x0 (GOOD STATUS) cmd finished after 21.027s timeout 9600s Starting to write CD/DVD/BD at speed 4 in real force BLANK mode for single session. No chance to quit anymore. Operation starts. Performing OPC... Blanking entire disk cdrecord: blank unit: scsi sendcmd: retryable error CDB: A1 00 00 00 00 00 00 00 00 00 00 00 status: 0x0 (GOOD STATUS) cmd finished after 21.027s timeout 9600s cdrecord: Cannot blank disk, aborting. ~>