---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p2 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU N455   @ 1.66GHz (1662.54-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x106ca  Family=0x6  Model=0x1c  Stepping=10
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 2018189312 (1924 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 hardware threads
arc4random: no preloaded entropy cache
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1662540060 Hz quality 1000
random: entropy device external interface
md0: Preloaded image </data/ramdisk.ufs> 14417920 bytes at 0xffffffff82662c30
kbd1 at kbdmux0
000.000026 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO CB-01> on motherboard
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKH (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKG (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKF (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKG (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKH (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKE (20181213/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKE (20181213/dspkginit-605)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20181213/dsfield-348)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20181213/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x18e8-0x18ef mem 0xf0200000-0xf027ffff,0xd0000000-0xdfffffff,0xf0000000-0xf00fffff irq 16 at device 2.0 on pci0
agp0: <Intel Pineview (M) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xf0280000-0xf02fffff at device 2.1 on pci0
hdac0: <Intel 82801G HDA Controller> mem 0xf0500000-0xf0503fff at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20181213/dsfield-348)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20181213/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pcib1: failed to allocate initial prefetch window: 0xf0500000-0xf05fffff
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00600000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 60:eb:69:62:c9:47
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20181213/dsfield-348)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20181213/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0504000-0xf05043ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0x18e0-0x18e7,0x18d4-0x18d7,0x18d8-0x18df,0x18d0-0x18d3,0x18c0-0x18cf mem 0xf0504400-0xf05047ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xdf000-0xdf7ff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
arc4random: no preloaded entropy cache
hdacc0: <Realtek ALC272 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC272 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC272 (Analog 2.0+HP/2.0)> at nid 20,33 and 24 on hdaa0
pcm1: <Realtek ALC272 (Onboard Analog Mic)> at nid 18 on hdaa0
ugen4.1: <Intel EHCI root HUB> at usbus4
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub4: ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <TOSHIBA MK5075GSX GT001M> ATA8-ACS SATA 2.x device
ada0: Serial Number 522ECA71T
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:/dev/md0 []...
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
ugen4.2: <vendor 0x13fe USB DISK 2.0> at usbus4
umass0 on uhub0
umass0: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: < USB DISK 2.0 PMAP> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 900073D3F4F02886
da0: 40.000MB/s transfers
da0: 14805MB (30320640 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
Root mount waiting for: usbus4
ugen4.3: <Ericsson Ericsson F3507g Mobile Broadband Minicard Composite Device> at usbus4
ugen4.4: <Generic USB2.0-CRW> at usbus4
umass1 on uhub0
umass1: <Bulk-In, Bulk-Out, Interface> on usbus4
umass1:  SCSI over Bulk-Only; quirks = 0x4000
umass1:3:1: Attached to scbus3
da1 at umass-sim1 bus 1 scbus3 target 0 lun 0
da1: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da1: Serial Number 20071114173400000
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
ugen1.2: <Broadcom Corp Broadcom Bluetooth 2.1 Device> at usbus1
ugen4.5: <Image Processor Lenovo EasyCamera> at usbus4
random: unblocking device.
Trying to mount root from ufs:/dev/md2 []...
lo0: link state changed to UP
re0: link state changed to DOWN
umodem0 on uhub0
umodem0: <Ericsson F3507g Mobile Broadband Minicard Modem> on usbus4
umodem0: data interface 2, has CM over data, has break
umodem1 on uhub0
umodem1: <Ericsson F3507g Mobile Broadband Minicard Data Modem> on usbus4
umodem1: data interface 4, has CM over data, has break
umodem2 on uhub0
umodem2: <Ericsson F3507g Mobile Broadband Minicard GPS Port> on usbus4
umodem2: data interface 12, has CM over data, has break
umodem2: no data interface
device_attach: umodem2 attach returned 6
cdce0 on uhub0
cdce0: <Ericsson F3507g Mobile Broadband Minicard Network Adapter> on usbus4
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:80:37:ec:02:00
umodem2 on uhub0
umodem2: <Ericsson F3507g Mobile Broadband Minicard GPS Port> on usbus4
umodem2: data interface 12, has CM over data, has break
umodem2: no data interface
device_attach: umodem2 attach returned 6
ubt0 on uhub4
ubt0: <Broadcom Corp Broadcom Bluetooth 2.1 Device, class 224/1, rev 2.00/4.72, addr 2> on usbus1
umodem2 on uhub0
umodem2: <Ericsson F3507g Mobile Broadband Minicard GPS Port> on usbus4
umodem2: data interface 12, has CM over data, has break
umodem2: no data interface
device_attach: umodem2 attach returned 6
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ichwd0: <Intel NM10 watchdog timer> on isa0
rtwn0: <Realtek RTL8188CE> port 0x3000-0x30ff mem 0xf0100000-0xf0103fff irq 18 at device 0.0 on pci2
rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R
in6_purgeaddr: err=65, destination address delete failed
lo0: link state changed to DOWN
lo0: link state changed to UP
in6_purgeaddr: err=65, destination address delete failed
lo0: link state changed to DOWN
lo0: link state changed to UP
in6_purgeaddr: err=65, destination address delete failed
lo0: link state changed to DOWN
wlan0: Ethernet address: 74:de:2b:17:c6:70
lo0: link state changed to UP