VBT header: VBT signature: "$VBT SKYLAKE " VBT version: 0x0064 (1.0) VBT header size: 0x0030 (48) VBT size: 0x1368 (4968) VBT checksum: 0xc9 BDB offset: 0x00000030 (48) BDB header: BDB signature: "BIOS_DATA_BLOCK " BDB version: 230 BDB header size: 0x0016 (22) BDB size: 0x1337 (4919) BDB blocks present: 1 2 3 6 7 8 9 10 12 13 17 18 20 26 27 31 32 40 42 43 44 46 51 252 253 254 BDB block 1 - General features block: Panel fitting: text & graphics Flexaim: yes Message: yes Clear screen: 0 DVO color flip required: no External VBT: no Enable SSC: no LFP on override: no Disable SSC on clone: no Underscan support for VGA timings: no Dynamic CD clock: yes Hotplug support in VBIOS: no Disable smooth vision: no Single DVI for CRT/DVI: no Enable 180 degree rotation: no Inverted FDI Rx polarity: no Extended VBIOS mode: no Copy iLFP DTD to SDVO LVDS DTD: no Best fit panel timing algorithm: no Ignore strap state: no Legacy monitor detect: yes Integrated CRT: no Integrated TV: no Integrated EFP: no DP SSC enable: no DP SSC dongle supported: no BDB block 2 - General definitions block: CRT DDC GMBUS addr: 0x02 Use ACPI DPMS CRT power states: no Skip CRT detect at boot: no Use DPMS on AIM devices: yes Boot display type: 0x0000 Child device size: 39 Child device count: 8 Child device info: Device handle: 0x0004 (EFP 1 (HDMI/DVI/DP)) Device type: 0x60d6 (DisplayPort/HDMI/DVI) Power management Hotplug signaling HDMI output Content protection High speed link TMDS/DVI signaling DisplayPort output Digital output I2C speed: 0x00 DP onboard redriver: 0x10 DP ondock redriver: 0x10 HDMI level shifter value: 0x08 HDMI max data rate: (0x00) Offset to DTD buffer for edidless CHILD: 0x1288 Edidless EFP: no Compression enable: no Compression method CPS: no Dual pipe ganged eDP: no Compression structure index: 0x00) Slave DDI port: 0x00 (HDMI-A) AIM offset: 0 DVO Port: 0x07 (DP-B) AIM I2C pin: 0x00 AIM Slave address: 0x00 DDC pin: 0x01 EDID buffer ptr: 0x00 DVO config: 0x00 EFP routed through dock: no Lane reversal: no Onboard LSPCON: no Iboost enable: no HPD sense invert: no HDMI compatible? no DP compatible? no TMDS compatible? no Aux channel: 0x10 Dongle detect: 0x01 Pipe capabilities: 0x00 SDVO stall signal available: no Hotplug connect status: 0x00 Integrated encoder instead of SDVO: yes DVO wiring: 0x01 MIPI bridge type: 00 (unknown) Device class extension: 0x00 DVO function: 0x00 DP USB type C support: no 2X DP GPIO index: 0x00 2X DP GPIO pin number: 0x00 IBoost level for HDMI: 0x02 IBoost level for DP/eDP: 0x00 Child device info: Device handle: 0x0040 (EFP 2 (HDMI/DVI/DP)) Device type: 0x60d2 (DVI-D) Power management Hotplug signaling HDMI output Content protection High speed link TMDS/DVI signaling Digital output I2C speed: 0x00 DP onboard redriver: 0x10 DP ondock redriver: 0x10 HDMI level shifter value: 0x08 HDMI max data rate: (0x00) Offset to DTD buffer for edidless CHILD: 0x12a4 Edidless EFP: no Compression enable: no Compression method CPS: no Dual pipe ganged eDP: no Compression structure index: 0x00) Slave DDI port: 0x00 (HDMI-A) AIM offset: 0 DVO Port: 0x02 (HDMI-C) AIM I2C pin: 0x00 AIM Slave address: 0x00 DDC pin: 0x02 EDID buffer ptr: 0x00 DVO config: 0x00 EFP routed through dock: no Lane reversal: no Onboard LSPCON: no Iboost enable: no HPD sense invert: no HDMI compatible? no DP compatible? no TMDS compatible? no Aux channel: 0x00 Dongle detect: 0x01 Pipe capabilities: 0x00 SDVO stall signal available: no Hotplug connect status: 0x00 Integrated encoder instead of SDVO: yes DVO wiring: 0x02 MIPI bridge type: 00 (unknown) Device class extension: 0x00 DVO function: 0x00 DP USB type C support: no 2X DP GPIO index: 0x00 2X DP GPIO pin number: 0x00 IBoost level for HDMI: 0x02 IBoost level for DP/eDP: 0x00 BDB block 3 - Unknown, no decoding available: BDB block 6 - Unknown, no decoding available: BDB block 7 - Unknown, no decoding available: BDB block 8 - Unknown, no decoding available: BDB block 9 - PSR block: Panel 2 * Full link: no Require AUX to wakeup: no Lines to wait before link standby: 0 Idle frames to for PSR enable: 0 TP1 wakeup time: 200 usec (0x2) TP2/TP3 wakeup time: 200 usec (0x2) PSR2 TP2/TP3 wakeup time: 500 usec (0x0) BDB block 10 - Unknown, no decoding available: BDB block 12 - Driver feature data block: Boot Device Algorithm: os default Block display switching when DVD active: yes Allow display switching when in Full Screen DOS: no Hot Plug DVO: yes Dual View Zoom: no Driver INT 15h hook: no Enable Sprite in Clone Mode: yes Use 00000110h ID for Primary LFP: no Boot Mode X: 1024 Boot Mode Y: 768 Boot Mode Bpp: 8 Boot Mode Refresh: 60 Enable LFP as primary: no Selective Mode Pruning: no Dual-Frequency Graphics Technology: yes Default Render Clock Frequency: high NT 4.0 Dual Display Clone Support: no Default Power Scheme user interface: CUI Sprite Display Assignment when Overlay is Active in Clone Mode: secondary Display Maintain Aspect Scaling via CUI: yes Preserve Aspect Ratio: no Enable SDVO device power down: no CRT hotplug: yes LVDS config: Embedded DisplayPort Define Display statically: no Legacy CRT max X: 0 Legacy CRT max Y: 0 Legacy CRT max refresh: 85 Enable DRRS: yes Enable PSR: yes BDB block 13 - Unknown, no decoding available: BDB block 17 - Unknown, no decoding available: BDB block 18 - Unknown, no decoding available: BDB block 20 - Unknown, no decoding available: BDB block 26 - Unknown, no decoding available: BDB block 27 - eDP block: Panel 2 * Power Sequence: T3 2000 T7 10 T9 2000 T10 500 T12 5000 Panel color depth: 18 bpp eDP sDRRS MSA Delay: Lane 1 Fast link params: rate: 1.62G lanes: x2 mode pre-emphasis: none vswing: 0.4V Stereo 3D feature: no T3 optimization: yes Vswing/preemphasis table selection: Default (400 mV) Fast link training: no DPCD 600h write required: no PWM delays: PWM on to backlight enable: 0 Backlight disable to PWM off: 0 Full link params provided: no Full link params: pre-emphasis: none vswing: 0.4V BDB block 31 - Unknown, no decoding available: BDB block 32 - Unknown, no decoding available: BDB block 40 - LVDS options block: Panel type: 2 LVDS EDID available: yes Pixel dither: yes PFIT auto ratio: yes PFIT enhanced graphics mode: no PFIT enhanced text mode: no PFIT mode: 3 BDB block 42 - LVDS panel data block: No LVDS ptr block BDB block 43 - Backlight info block: Panel 2 * Inverter type: 2 Active low: 0 PWM freq: 200 Minimum brightness: 0 Level: 255 Control type: 2 Controller: 0 BDB block 44 - Unknown, no decoding available: BDB block 46 - Unknown, no decoding available: BDB block 51 - Unknown, no decoding available: BDB block 252 - Unknown, no decoding available: BDB block 253 - Unknown, no decoding available: BDB block 254 - Unknown, no decoding available: