---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
VT(efifb): resolution 800x600
CPU: AMD E1-1500 APU with Radeon(tm) HD Graphics (1476.39-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  SVM: (disabled in BIOS) NP,NRIP,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 6442450944 (6144 MB)
avail memory = 5740457984 (5474 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HPQOEM SLIC-CPC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: No AES or SHA support.
acpi0: <HPQOEM SLIC-CPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4b000-0xfeb4b3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4a000-0xfeb4afff irq 18 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb49000-0xfeb490ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb48000-0xfeb48fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb47000-0xfeb470ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
hdac0: <ATI SB600 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib2
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb46000-0xfeb46fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci2: <ACPI PCI bus> on pcib4
alc0: <Atheros AR8152 v2.0 PCIe Fast Ethernet> port 0xe000-0xe07f mem 0xfea00000-0xfea3ffff irq 17 at device 0.0 on pci2
alc0: 2048 Tx FIFO, 5376 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
alc0: Using defaults for TSO: 65518/35/2048
alc0: Ethernet address: 7c:05:07:26:22:6f
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb45000-0xfeb45fff irq 18 at device 22.0 on pci0
usbus5 on ohci3
usbus5: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb44000-0xfeb440ff irq 17 at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
usbus6: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC" frequency 1476303377 Hz quality 800
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC662 rev1 (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm1: <Realtek ALC662 rev1 (Front Analog)> at nid 27 and 25 on hdaa0
ugen3.1: <ATI EHCI root HUB> at usbus3
ugen6.1: <ATI EHCI root HUB> at usbus6
uhub0 on usbus3
uhub1 on usbus6
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen1.1: <ATI EHCI root HUB> at usbus1
ugen5.1: <ATI OHCI root HUB> at usbus5
uhub2 on usbus1
uhub3 on usbus5
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen2.1: <ATI OHCI root HUB> at usbus2
uhub4 on usbus4
uhub5 on usbus2
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub6 on usbus0
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from cd9660:/dev/iso9660/14_1_RELEASE_AMD64_BO [ro]...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST500DM002-1BD142 HP73> ATA8-ACS SATA 3.x device
ada0: Serial Number Z3TP5AEM
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x1<4K>
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <hp CDDVDW SH-216BB HE50> Removable CD-ROM SCSI device
cd0: Serial Number R8TM6YBD603CRM
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 435MB (222813 2048 byte sectors)
uhub4: 2 ports with 2 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub6: 5 ports with 5 removable, self powered
random: unblocking device.
uhub1: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub0: 5 ports with 5 removable, self powered
Root mount waiting for: usbus1 usbus3
ugen0.2: <Kensington Kensington USB/PS2 Orbit> at usbus0
ugen2.2: <CHICONY USB Keyboard> at usbus2
ukbd0 on uhub5
ukbd0: <CHICONY USB Keyboard, class 0/0, rev 2.00/2.30, addr 2> on usbus2
kbd2 at ukbd0
ugen1.2: <Generic USB2.0-CRW> at usbus1
umass0 on uhub2
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.88, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: Serial Number 20071114173400000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
lo0: link state changed to UP
ums0 on uhub6
ums0: <Kensington Kensington USB/PS2 Orbit, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=0
uhid0 on uhub5
uhid0: <CHICONY USB Keyboard, class 0/0, rev 2.00/2.30, addr 2> on usbus2
alc0: link state changed to DOWN
alc0: link state changed to UP