APM version 1.2 available, flags 3.
smp_acpi_probe: entry base 0x9fc00, limit 0xa0000
smp_acpi_probe: entry base 0xf0000, limit 0x100000
smp_acpi_probe: found ACPI RSDP signature at 0x000f7df0
smp: using ACPI to detect MP configuration
smp: found rsdp at 0x000f7df0 oem id: ASUS
smp: rsdp points to rsdt at 0xbffd000
smp: searching 2 entries for APIC information
smp: skipping uninteresting header 'FACP'
smp: skipping uninteresting header 'BOOT'
smp_mp_probe: entry base 0x9fc00, limit 0xa0000
smp_mp_probe: entry base 0xf0000, limit 0x100000
VESA version = 2.0
oem string: S3 Incorporated. 86C362
  109: 132 x 25 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
  10a: 132 x 43 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
  12e: 320 x 200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  10d: 320 x 200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  10e: 320 x 200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  128: 320 x 200 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  10f: 320 x 200 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  131: 320 x 240 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  132: 320 x 240 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  133: 320 x 240 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  135: 320 x 240 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  134: 320 x 240 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  141: 400 x 300 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  142: 400 x 300 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  143: 400 x 300 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  145: 400 x 300 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  144: 400 x 300 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  151: 512 x 384 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  152: 512 x 384 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  153: 512 x 384 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  155: 512 x 384 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  154: 512 x 384 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  100: 640 x 400 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  11c: 640 x 400 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  11d: 640 x 400 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  129: 640 x 400 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  11e: 640 x 400 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  101: 640 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  110: 640 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  111: 640 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  12a: 640 x 480 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  112: 640 x 480 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  171: 720 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  172: 720 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  173: 720 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  17c: 720 x 576 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  17d: 720 x 576 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  17e: 720 x 576 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  102: 800 x 600 x 4 (a = 31, mem = 3, phy = 0, p = 4, b = 1)
  103: 800 x 600 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  113: 800 x 600 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  114: 800 x 600 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  12b: 800 x 600 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  115: 800 x 600 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  104: 1024 x 768 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
  105: 1024 x 768 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  116: 1024 x 768 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  117: 1024 x 768 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  12c: 1024 x 768 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  118: 1024 x 768 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  161: 1152 x 864 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  162: 1152 x 864 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  163: 1152 x 864 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  165: 1152 x 864 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  164: 1152 x 864 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  106: 1280 x 1024 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
  107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  119: 1280 x 1024 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  12d: 1280 x 1024 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  120: 1600 x 1200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
  121: 1600 x 1200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
  122: 1600 x 1200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
VESA compatible graphics!
EDID1: 4f
EDID2: ebx 102
EDID3: 4f
Got EDID!
Vendor: CTX
Product ID: 22164
Serial #: 0
Produced in week/year: 0/1997
EDID version: 1.1
Type: Analog
Size: 28 cm x 21 cm
Gamma=2.1
White (X,Y)=(0.281,0.31)
Supported Future Video Modes:
640x480@120Hz (id=31793)
800x600@100Hz (id=26693)
1024x768@85Hz (id=22881)
1280x1024@60Hz (id=32897)
Supported VESA Video Modes:
720x400@70
640x480@60
640x480x67
640x480x72
640x480x75
800x600@60
800x600@72
800x600@75
832x624@75
1024x768@60
1024x768@70
1024x768@75
1152x870@75
Additional Video Mode:
clock=25.17 MHz
h: (640, 656, 752, 800)
v: (350, 387, 389, 449)
size: 27 cm x 20.2 cm
border: 0 cm x 0 cm
Additional Video Mode:
clock=56.25 MHz
h: (800, 832, 896, 1048)
v: (600, 601, 604, 631)
size: 27 cm x 20.2 cm
border: 0 cm x 0 cm
Additional Video Mode:
clock=36 MHz
h: (640, 672, 720, 832)
v: (480, 481, 484, 509)
size: 27 cm x 20.2 cm
border: 0 cm x 0 cm
Additional Video Mode:
clock=94.5 MHz
h: (1024, 1072, 1168, 1376)
v: (768, 769, 772, 808)
size: 27 cm x 20.2 cm
border: 0 cm x 0 cm
Welcome to the Haiku boot loader!
number of drives: 2
add_partitions_for(0x001053b8, mountFS = no)
add_partitions_for(fd = 0, mountFS = no)
0x001055c4 Partition::Partition
0x001055c4 Partition::Scan()
check for partitioning_system: Amiga Partition Map
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
intel: pm_identify_partition(1, 1070532: 0, 4327464960, 512)
Partition::SetTo(): active: 80
Partition::SetTo(): active: 0
Partition::SetTo(): active: 0
Partition::SetTo(): active: 0
  priority: 810
check for partitioning_system: Intel Extended Partition
check for partitioning_system: Apple Partition Map
intel: pm_scan_partition(1, 1070532: 0, 4327464960, 512)
0x00105718 Partition::Partition
0x001055c4 Partition::AddChild 0x00105718
0x00105718 Partition::SetParent 0x001055c4
new child partition!
0x001055c4 Partition::Scan: *** scan child 0x00105718 (start = 8225280, size = 4318272000, parent = 0x001055c4)!
0x00105718 Partition::Scan()
check for partitioning_system: Amiga Partition Map
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
intel: pm_identify_partition(2, 1070872: 8225280, 4318272000, 512)
Partition::SetTo(): active: c3
Partition::CheckLocation() - end after session: 2534642281984 (session: 4318272000)
intel: _ParsePrimary(): partition 0: bad location, ignoring
Partition::SetTo(): active: ad
Partition::CheckLocation() - end after session: 1140980562944 (session: 4318272000)
intel: _ParsePrimary(): partition 1: bad location, ignoring
Partition::SetTo(): active: 69
Partition::CheckLocation() - end after session: 1939398313472 (session: 4318272000)
intel: _ParsePrimary(): partition 2: bad location, ignoring
Partition::SetTo(): active: 79
Partition::CheckLocation() - end after session: 1244261457408 (session: 4318272000)
intel: _ParsePrimary(): partition 3: bad location, ignoring
  priority: 100
check for partitioning_system: Intel Extended Partition
intel: ep_identify_partition(2, 8225280, 4318272000, 512)
check for partitioning_system: Apple Partition Map
0x001055c4 Partition::~Partition
0x00105718 Partition::SetParent 0x00000000
boot partition offset: 8225280
0x00105718 Partition::_Mount check for file_system: BFS Filesystem
load kernel...
unhandled pheader type 0x6
unhandled pheader type 0x3
video mode: 1024x768x32
kernel entry at 80032190
Welcome to kernel debugger output!
Haiku revision: 26056
CPU 0: type 0 family 6 extended_family 0 model 6 extended_model 0 stepping 5, string 'GenuineIntel'
CPU 0: features: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
heap_attach: attached to 0x90b57000 - usable range 0x90b6c000 - 0x91b57000
slab: init base 0x91b57000 + 0x2000
initialize_commpage_syscall(): sysenter/sysexit supported
allocate_commpage_entry(3, 5) -> 0xffff0100
allocate_commpage_entry(2, 12) -> 0xffff0108
apm_init()
  code32: 0xf000, 0x76e0, length 0x929c
  code16: 0xf000, length 0x4166
  data: 0xfdc7, length 0x7516
heap_attach: attached to 0x80300000 - usable range 0x80302000 - 0x80400000
Could not register image "usb_disk": Bad argument type passed to function
PCI: pci_module_init
PCI: mechanism 1 controller found
PCI: dom 0, bus 0, dev  1, func 0, changed PCI bridge control from 0x0008 to 0x000b
PCI: [dom 0, bus  0] bus   0, device  0, function  0: vendor 8086, device 7180, revision 03
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 8086: Intel Corporation
PCI:   device 7180: 440LX/EX - 82443LX/EX Host bridge
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 40, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host e7800000, pci e7800000, size 00400000, flags 08
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: AGP
PCI: [dom 0, bus  0] bus   0, device  1, function  0: vendor 8086, device 7181, revision 03
PCI:   class_base 06, class_function 04, class_api 00
PCI:   vendor 8086: Intel Corporation
PCI:   device 7181: 440LX/EX - 82443LX/EX AGP bridge
PCI:   info: Bridge (PCI bridge, Normal decode)
PCI:   line_size 00, latency 40, header_type 01, BIST 00
PCI:   subsystem_id 0000, subsystem_vendor_id 0000
PCI:   primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 40
PCI:   io_base_upper_16  0000, io_base  e0
PCI:   io_limit_upper_16 0000, io_limit d0
PCI:   memory_base e000, memory_limit e760
PCI:   prefetchable_memory_base_upper32  00000000, prefetchable_memory_base  e770
PCI:   prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit e770
PCI:   bridge_control 000b, secondary_status 02a0
PCI:   interrupt_line 00, interrupt_pin 00
PCI:   ROM base host 00000000, pci 00000000, size ??
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  1] bus   1, device  0, function  0: vendor 5333, device 8a13, revision 02
PCI:   class_base 03, class_function 00, class_api 00
PCI:   vendor 5333: S3 Inc.
PCI:   device 8a13: 86c368 [Trio 3D/2X] (Trio3D/2X)
PCI:   info: Display controller (VGA compatible controller, VGA controller)
PCI:   line_size 00, latency 40, header_type 00, BIST 00
PCI:   ROM base host e77f0000, pci e77f0000, size 00010000
PCI:   cardbus_CIS 00000000, subsystem_id 8a13, subsystem_vendor_id 5333
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 04, max_latency ff
PCI:   base reg 0: host e0000000, pci e0000000, size 04000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM, AGP
PCI: [dom 0, bus  0] bus   0, device  4, function  0: vendor 8086, device 7110, revision 02
PCI:   class_base 06, class_function 01, class_api 00
PCI:   vendor 8086: Intel Corporation
PCI:   device 7110: 82371AB/EB/MB PIIX4 ISA
PCI:   info: Bridge (ISA bridge)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  4, function  1: vendor 8086, device 7111, revision 01
PCI:   class_base 01, class_function 01, class_api 80
PCI:   vendor 8086: Intel Corporation
PCI:   device 7111: 82371AB/EB/MB PIIX4 IDE
PCI:   info: Mass storage controller (IDE interface)
PCI:   line_size 00, latency 20, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 0000d800, pci 0000d800, size 00000010, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  4, function  2: vendor 8086, device 7112, revision 01
PCI:   class_base 0c, class_function 03, class_api 00
PCI:   vendor 8086: Intel Corporation
PCI:   device 7112: 82371AB/EB/MB PIIX4 USB
PCI:   info: Serial bus controller (USB Controller, UHCI)
PCI:   line_size 00, latency 20, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 0a, interrupt_pin 04, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 0000d400, pci 0000d400, size 00000020, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  4, function  3: vendor 8086, device 7113, revision 02
PCI:   class_base 06, class_function 80, class_api 00
PCI:   vendor 8086: Intel Corporation
PCI:   device 7113: 82371AB/EB/MB PIIX4 ACPI
PCI:   info: Bridge
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device 10, function  0: vendor 10ec, device 8139, revision 10
PCI:   class_base 02, class_function 00, class_api 00
PCI:   vendor 10ec: Realtek Semiconductor Co., Ltd.
PCI:   device 8139: RTL-8139/8139C/8139C+ (RT8139)
PCI:   info: Network controller (Ethernet controller)
PCI:   line_size 00, latency 20, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 8139, subsystem_vendor_id 10ec
PCI:   interrupt_line 0b, interrupt_pin 01, min_grant 20, max_latency 40
PCI:   base reg 0: host 0000d000, pci 0000d000, size 00000100, flags 01
PCI:   base reg 1: host df800000, pci df800000, size 00000100, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
usb_uhci: successfully started the controller
usb_ohci: no devices found
usb_ehci: no devices found
usb_disk: device reports a lun count of 4
usb_disk: vendor_identification    "Generic "
usb_disk: product_identification   "USB SD Reader   "
usb_disk: product_revision_level   "1.00"
usb_disk: operation 0x00 failed at the SCSI level
usb_disk: vendor_identification    "Generic "
usb_disk: product_identification   "USB CF Reader   "
usb_disk: product_revision_level   "1.01"
usb_disk: operation 0x00 failed at the SCSI level
usb_disk: vendor_identification    "Generic "
usb_disk: product_identification   "USB SM Reader   "
usb_disk: product_revision_level   "1.02"
usb_disk: operation 0x00 failed at the SCSI level
usb_disk: vendor_identification    "Generic "
usb_disk: product_identification   "USB MS Reader   "
usb_disk: product_revision_level   "1.03"
usb_disk: operation 0x00 failed at the SCSI level
get_boot_partitions(): boot volume message:
field: "booted from image", type: BOOL (0x424f4f4c):
  [ 0] false
field: "partition offset", type: LLNG (0x4c4c4e47):
  [ 0] 8225280 (0x7d8200)
field: "boot method", type: LONG (0x4c4f4e47):
  [ 0] 0 (0x0)
field: "boot drive number", type: LLNG (0x4c4c4e47):
  [ 0] 128 (0x80)
field: "disk identifier", type: RAWT (0x52415754):
  [ 0] data: "0x8070d678", 80 bytes
get_boot_partitions(): boot method type: 0
partitioning system: partitioning_systems/intel/extended/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1)
KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
intel: ep_std_ops(0x1)
KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
intel: ep_std_ops(0x2)
KDiskDeviceManager::_AddDiskSystem() done: No error
partitioning system: partitioning_systems/intel/map/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1)
KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1
intel: pm_std_ops(0x1)
KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0
intel: pm_std_ops(0x2)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/bfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1)
KDiskSystem::Load(): file_systems/bfs/v1 -> 1
KDiskSystem::Unload(): file_systems/bfs/v1 -> 0
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/devfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1)
KDiskSystem::Load(): file_systems/devfs/v1 -> 1
KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/rootfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1)
KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
KDiskDeviceManager::_AddDiskSystem() done: No error
number of disk systems: 5
KDiskDeviceManager::_Scan(/dev/disk)
PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
PCI-IDE: init channel...
PCI-IDE: channel index 0
PCI-IDE: bus master base 0xd800
PCI-IDE: init channel done
IDE: scan_device_worker: bus 0x90c0e100, device-number 0
IDE: create_device: bus 0x90c0e100, device-number 0
IDE: setup_device_links: bus 0x90c0e100, device 0x90bc7c00
IDE: scan_device_int: device 0x90bc7c00, atapi 0
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: error bit set - no device or wrong type (status: 0x01)
IDE: scan_device_int: device 0x90bc7c00, atapi 1
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: scan_device_worker: bus 0x90c0e100, device-number 1
IDE: create_device: bus 0x90c0e100, device-number 1
IDE: setup_device_links: bus 0x90c0e100, device 0x90c18000
IDE: scan_device_int: device 0x90c18000, atapi 0
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: scan_device_worker: bus 0x90c0e100, device-number 0
IDE: destroy_device: device 0x90bc7c00
IDE: cleanup_device_links: device 0x90bc7c00
IDE: create_device: bus 0x90c0e100, device-number 0
IDE: setup_device_links: bus 0x90c0e100, device 0x90bc7c00
IDE: scan_device_int: device 0x90bc7c00, atapi 0
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: error bit set - no device or wrong type (status: 0x01)
IDE: scan_device_int: device 0x90bc7c00, atapi 1
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: scan_device_worker: bus 0x90c0e100, device-number 1
IDE: destroy_device: device 0x90c18000
IDE: cleanup_device_links: device 0x90c18000
IDE: create_device: bus 0x90c0e100, device-number 1
IDE: setup_device_links: bus 0x90c0e100, device 0x90c18000
IDE: scan_device_int: device 0x90c18000, atapi 0
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
publish device: node 0x90c190c0, path disk/atapi/0/master/raw, module generic/block_io/device_v1
publish device: node 0x90c192a0, path disk/ata/0/slave/raw, module generic/block_io/device_v1
PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
PCI-IDE: init channel...
PCI-IDE: channel index 1
PCI-IDE: bus master base 0xd808
PCI-IDE: init channel done
IDE: scan_device_worker: bus 0x90c0e300, device-number 0
IDE: create_device: bus 0x90c0e300, device-number 0
IDE: setup_device_links: bus 0x90c0e300, device 0x90c18400
IDE: scan_device_int: device 0x90c18400, atapi 0
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: scan_device_worker: bus 0x90c0e300, device-number 1
IDE: create_device: bus 0x90c0e300, device-number 1
IDE: setup_device_links: bus 0x90c0e300, device 0x90c18800
IDE: scan_device_int: device 0x90c18800, atapi 0
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x90c18800, atapi 1
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: no fast response to inquiry
IDE: scan_device_int: status 0x00
IDE: scan_device_int: busy bit not set after 100ms - probably noone there
IDE: scan_device_int: aborting because busy bit not set
IDE: destroy_device: device 0x90c18800
IDE: cleanup_device_links: device 0x90c18800
IDE: scan_device_worker: bus 0x90c0e300, device-number 0
IDE: destroy_device: device 0x90c18400
IDE: cleanup_device_links: device 0x90c18400
IDE: create_device: bus 0x90c0e300, device-number 0
IDE: setup_device_links: bus 0x90c0e300, device 0x90c18400
IDE: scan_device_int: device 0x90c18400, atapi 0
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: scan_device_worker: bus 0x90c0e300, device-number 1
IDE: create_device: bus 0x90c0e300, device-number 1
IDE: setup_device_links: bus 0x90c0e300, device 0x90c18800
IDE: scan_device_int: device 0x90c18800, atapi 0
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x90c18800, atapi 1
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: no fast response to inquiry
IDE: scan_device_int: status 0x00
IDE: scan_device_int: busy bit not set after 100ms - probably noone there
IDE: scan_device_int: aborting because busy bit not set
IDE: destroy_device: device 0x90c18800
IDE: cleanup_device_links: device 0x90c18800
publish device: node 0x90c19840, path disk/ata/1/master/raw, module generic/block_io/device_v1
ahci: ahci_supports_device
KDiskDeviceManager::_Scan(/dev/disk/ata)
KDiskDeviceManager::_Scan(/dev/disk/ata/0)
KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave)
KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave/raw)
  found device: /dev/disk/ata/0/slave/raw
KDiskDeviceManager::_Scan(/dev/disk/ata/1)
KDiskDeviceManager::_Scan(/dev/disk/ata/1/master)
KDiskDeviceManager::_Scan(/dev/disk/ata/1/master/raw)
  found device: /dev/disk/ata/1/master/raw
KDiskDeviceManager::_Scan(/dev/disk/atapi)
KDiskDeviceManager::_Scan(/dev/disk/atapi/0)
KDiskDeviceManager::_Scan(/dev/disk/atapi/0/master)
KDiskDeviceManager::_Scan(/dev/disk/atapi/0/master/raw)
  found device: /dev/disk/atapi/0/master/raw
KDiskDeviceManager::_Scan(/dev/disk/usb)
KDiskDeviceManager::_Scan(/dev/disk/usb/0)
KDiskDeviceManager::_Scan(/dev/disk/usb/0/0)
KDiskDeviceManager::_Scan(/dev/disk/usb/0/0/raw)
  found device: /dev/disk/usb/0/0/raw
usb_disk: operation 0x00 failed at the SCSI level
usb_uhci: td (0x01972a60) error: status: 0x394007ff; token: 0x00e90269;
usb_uhci: td (0x01972aa0) error: status: 0x394007ff; token: 0xffe80269;
usb_uhci: td (0x01972ac0) error: status: 0x394007ff; token: 0x01810269;
usb_uhci: td (0x01972b00) error: status: 0x394007ff; token: 0xffe80269;
usb_uhci: td (0x01972b20) error: status: 0x394007ff; token: 0x01810269;
usb_disk: receiving the command status wrapper failed
usb_uhci: td (0x01972ba0) error: status: 0x394007ff; token: 0xffe80269;
usb_disk: failed to update capacity
KDiskDeviceManager::_Scan(/dev/disk/usb/0/1)
KDiskDeviceManager::_Scan(/dev/disk/usb/0/1/raw)
  found device: /dev/disk/usb/0/1/raw