APM version 1.2 available, flags 3. smp_acpi_probe: entry base 0x9fc00, limit 0xa0000 smp_acpi_probe: entry base 0xf0000, limit 0x100000 smp_acpi_probe: found ACPI RSDP signature at 0x000f6c60 smp: using ACPI to detect MP configuration smp: found rsdp at 0x000f6c60 oem id: PTLTD smp: rsdp points to rsdt at 0xfefab68 smp: searching 3 entries for APIC information smp: skipping uninteresting header 'FACP' smp: local apic address is 0xfee00000 smp: found local APIC with id 0 smp: found io APIC with id 1 and address 0xfec00000 VESA version = 2.0 oem string: V M ware, Inc. VBE support 2.0 120: 320 x 200 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 121: 320 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 122: 640 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 123: 640 x 480 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 124: 800 x 600 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 125: 1024 x 768 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 126: 1152 x 864 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 127: 1280 x 960 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 128: 1280 x 1024 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 129: 1400 x 1050 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12a: 1600 x 1200 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12b: 1792 x 1344 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12c: 1856 x 1392 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12d: 1920 x 1440 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12e: 320 x 200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 12f: 320 x 400 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 130: 640 x 400 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 131: 640 x 480 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 132: 800 x 600 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 133: 1024 x 768 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 134: 1152 x 864 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 135: 1280 x 960 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 136: 1280 x 1024 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 137: 1400 x 1050 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 138: 1600 x 1200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 139: 1792 x 1344 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13a: 1856 x 1392 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13b: 1920 x 1440 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13c: 320 x 200 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13d: 320 x 400 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13e: 640 x 400 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13f: 640 x 480 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 140: 800 x 600 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 141: 1024 x 768 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 142: 1152 x 864 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 143: 1280 x 960 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 144: 1280 x 1024 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 145: 1400 x 1050 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 146: 1600 x 1200 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 147: 1792 x 1344 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 148: 1856 x 1392 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 149: 1920 x 1440 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 100: 640 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 101: 640 x 480 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 103: 800 x 600 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 105: 1024 x 768 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 107: 1280 x 1024 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 10e: 320 x 200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 111: 640 x 480 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 114: 800 x 600 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 117: 1024 x 768 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 11a: 1280 x 1024 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) VESA compatible graphics! EDID1: 0 Welcome to the Haiku boot loader! number of drives: 1 add_partitions_for(0x00105460, mountFS = no) add_partitions_for(fd = 0, mountFS = no) 0x001055b4 Partition::Partition 0x001055b4 Partition::Scan() check for partitioning_system: Amiga Partition Map check for partitioning_system: EFI GUID Partition Map check for partitioning_system: Intel Partition Map intel: pm_identify_partition(1, 1070516: 0, 104767488, 512) Partition::SetTo(): active: 6f Partition::CheckLocation() - end after session: 1983497949184 (session: 104767488) intel: _ParsePrimary(): partition 0: bad location, ignoring Partition::SetTo(): active: 74 Partition::SetTo(): active: 0 Partition::SetTo(): active: 0 priority: 500 check for partitioning_system: Intel Extended Partition check for partitioning_system: Apple Partition Map boot partition offset: 0 0x001055b4 Partition::_Mount check for file_system: BFS Filesystem load kernel... unhandled pheader type 0x6 unhandled pheader type 0x3 video mode: 1024x768x32 kernel entry at 80032804 Welcome to kernel debugger output! Haiku revision: 25852 CPU 0: type 0 family 6 extended_family 0 model 14 extended_model 0 stepping 8, string 'GenuineIntel' CPU 0: vendor 'Intel' model name 'Genuine Intel(R) CPU T2300 @ 1.66GHz' CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clfsh ds acpi mmx fxsr sse sse2 ss sse3 heap_attach: attached to 0x90b4b000 - usable range 0x90b60000 - 0x91b4b000 slab: init base 0x91b4b000 + 0x2000 vm_mark_page_range_inuse: page 0x9f in non-free state 7! initialize_commpage_syscall(): sysenter/sysexit supported allocate_commpage_entry(3, 5) -> 0xffff0100 allocate_commpage_entry(2, 12) -> 0xffff0108 apm_init() code32: 0xf000, 0x5643, length 0xffff code16: 0xf000, length 0xffff data: 0x40, length 0xffff heap_attach: attached to 0x90800000 - usable range 0x90803000 - 0x90a00000 Could not register image "usb_disk": Bad argument type passed to function PCI: pci_module_init PCI: mechanism 1 controller found PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0080 to 0x008c PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7190, revision 01 PCI: class_base 06, class_function 00, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7190: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (Virtual Machine Chipset) PCI: info: Bridge (Host bridge) PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (empty list) PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7191, revision 01 PCI: class_base 06, class_function 04, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7191: 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge PCI: info: Bridge (PCI bridge, Normal decode) PCI: line_size 00, latency 00, header_type 01, BIST 00 PCI: subsystem_id 0000, subsystem_vendor_id 0000 PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 40 PCI: io_base_upper_16 0000, io_base f0 PCI: io_limit_upper_16 0000, io_limit 00 PCI: memory_base fff0, memory_limit 0000 PCI: prefetchable_memory_base_upper32 00000000, prefetchable_memory_base fff0 PCI: prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit 0000 PCI: bridge_control 0080, secondary_status 02a0 PCI: interrupt_line 00, interrupt_pin 00 PCI: ROM base host 00000000, pci 00000000, size ?? PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 0: vendor 8086, device 7110, revision 08 PCI: class_base 06, class_function 01, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7110: 82371AB/EB/MB PIIX4 ISA (Virtual Machine Chipset) PCI: info: Bridge (ISA bridge) PCI: line_size 00, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 1: vendor 8086, device 7111, revision 01 PCI: class_base 01, class_function 01, class_api 8a PCI: vendor 8086: Intel Corporation PCI: device 7111: 82371AB/EB/MB PIIX4 IDE (Virtual Machine Chipset) PCI: info: Mass storage controller (IDE interface) PCI: line_size 00, latency 40, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00001050, pci 00001050, size 00000010, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 3: vendor 8086, device 7113, revision 08 PCI: class_base 06, class_function 80, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI (Virtual Machine Chipset) PCI: info: Bridge PCI: line_size 00, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 15, function 0: vendor 15ad, device 0405, revision 00 PCI: class_base 03, class_function 00, class_api 00 PCI: vendor 15ad: VMware Inc PCI: device 0405: Abstract SVGA II Adapter PCI: info: Display controller (VGA compatible controller, VGA controller) PCI: line_size 08, latency 40, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00008000 PCI: cardbus_CIS 00000000, subsystem_id 0405, subsystem_vendor_id 15ad PCI: interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00001060, pci 00001060, size 00000010, flags 01 PCI: base reg 1: host f0000000, pci f0000000, size 08000000, flags 00 PCI: base reg 2: host e8000000, pci e8000000, size 00800000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (empty list) PCI: [dom 0, bus 0] bus 0, device 16, function 0: vendor 8086, device 100f, revision 01 PCI: class_base 02, class_function 00, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 100f: 82545EM Gigabit Ethernet Controller (Copper) (Abstract PRO/1000 MT Single Port Adapter) PCI: info: Network controller (Ethernet controller) PCI: line_size 10, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00010000 PCI: cardbus_CIS 00000000, subsystem_id 0750, subsystem_vendor_id 15ad PCI: interrupt_line 09, interrupt_pin 01, min_grant ff, max_latency 00 PCI: base reg 0: host e8820000, pci e8820000, size 00020000, flags 04 PCI: base reg 1: host 00000000, pci 00000000, size 00000010, flags 0f PCI: base reg 2: host e8800000, pci e8800000, size 00010000, flags 04 PCI: base reg 3: host 00000000, pci 00000000, size 00000010, flags 0f PCI: base reg 4: host 00001070, pci 00001070, size 00000010, flags 09 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, PCI-X usb_uhci: no devices found usb_ohci: no devices found usb_ehci: no devices found USB Stack: no bus managers available usb_disk: getting module failed 0x80007007 devfs_add_preloaded_drivers: Failed to add "usb_disk" get_boot_partitions(): boot volume message: field: "booted from image", type: BOOL (0x424f4f4c): [ 0] false field: "partition offset", type: LLNG (0x4c4c4e47): [ 0] 0 (0x0) field: "boot method", type: LONG (0x4c4f4e47): [ 0] 0 (0x0) field: "boot drive number", type: LLNG (0x4c4c4e47): [ 0] 128 (0x80) field: "disk identifier", type: RAWT (0x52415754): [ 0] data: "0x80701da0", 80 bytes get_boot_partitions(): boot method type: 0 partitioning system: partitioning_systems/intel/extended/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1) KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1 intel: ep_std_ops(0x1) KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0 intel: ep_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error partitioning system: partitioning_systems/intel/map/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1) KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1 intel: pm_std_ops(0x1) KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0 intel: pm_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/bfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1) KDiskSystem::Load(): file_systems/bfs/v1 -> 1 KDiskSystem::Unload(): file_systems/bfs/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/devfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1) KDiskSystem::Load(): file_systems/devfs/v1 -> 1 KDiskSystem::Unload(): file_systems/devfs/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/rootfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1) KDiskSystem::Load(): file_systems/rootfs/v1 -> 1 KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error number of disk systems: 5 KDiskDeviceManager::_Scan(/dev/disk) PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14 PCI-IDE: init channel... PCI-IDE: channel index 0 PCI-IDE: bus master base 0x1050 PCI-IDE: init channel done IDE: scan_device_worker: bus 0x90c1f000, device-number 0 IDE: create_device: bus 0x90c1f000, device-number 0 IDE: setup_device_links: bus 0x90c1f000, device 0x90bda400 IDE: scan_device_int: device 0x90bda400, atapi 0 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: got a fast response IDE: scan_device_int: device found IDE: scan_device_worker: bus 0x90c1f000, device-number 1 IDE: create_device: bus 0x90c1f000, device-number 1 IDE: setup_device_links: bus 0x90c1f000, device 0x90bdac00 IDE: scan_device_int: device 0x90bdac00, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x90bdac00, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x00 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x90bdac00 IDE: cleanup_device_links: device 0x90bdac00 IDE: scan_device_worker: bus 0x90c1f000, device-number 0 IDE: destroy_device: device 0x90bda400 IDE: cleanup_device_links: device 0x90bda400 IDE: create_device: bus 0x90c1f000, device-number 0 IDE: setup_device_links: bus 0x90c1f000, device 0x90bda400 IDE: scan_device_int: device 0x90bda400, atapi 0 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: got a fast response IDE: scan_device_int: device found IDE: scan_device_worker: bus 0x90c1f000, device-number 1 IDE: create_device: bus 0x90c1f000, device-number 1 IDE: setup_device_links: bus 0x90c1f000, device 0x90bdac00 IDE: scan_device_int: device 0x90bdac00, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x90bdac00, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x00 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x90bdac00 IDE: cleanup_device_links: device 0x90bdac00 publish device: node 0x90c20600, path disk/ata/0/master/raw, module generic/block_io/device_v1 PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15 PCI-IDE: init channel... PCI-IDE: channel index 1 PCI-IDE: bus master base 0x1058 PCI-IDE: init channel done IDE: scan_device_worker: bus 0x90c1f200, device-number 0 IDE: create_device: bus 0x90c1f200, device-number 0 IDE: setup_device_links: bus 0x90c1f200, device 0x90bdac00 IDE: scan_device_int: device 0x90bdac00, atapi 0 IDE: scan_device_int: send_command failed IDE: destroy_device: device 0x90bdac00 IDE: cleanup_device_links: device 0x90bdac00 IDE: scan_device_worker: bus 0x90c1f200, device-number 1 IDE: create_device: bus 0x90c1f200, device-number 1 IDE: setup_device_links: bus 0x90c1f200, device 0x90bdac00 IDE: scan_device_int: device 0x90bdac00, atapi 0 IDE: scan_device_int: send_command failed IDE: destroy_device: device 0x90bdac00 IDE: cleanup_device_links: device 0x90bdac00 IDE: scan_device_worker: bus 0x90c1f200, device-number 0 IDE: create_device: bus 0x90c1f200, device-number 0 IDE: setup_device_links: bus 0x90c1f200, device 0x90bdac00 IDE: scan_device_int: device 0x90bdac00, atapi 0 IDE: scan_device_int: send_command failed IDE: destroy_device: device 0x90bdac00 IDE: cleanup_device_links: device 0x90bdac00 IDE: scan_device_worker: bus 0x90c1f200, device-number 1 IDE: create_device: bus 0x90c1f200, device-number 1 IDE: setup_device_links: bus 0x90c1f200, device 0x90bdac00 IDE: scan_device_int: device 0x90bdac00, atapi 0 IDE: scan_device_int: send_command failed IDE: destroy_device: device 0x90bdac00 IDE: cleanup_device_links: device 0x90bdac00 ahci: ahci_supports_device KDiskDeviceManager::_Scan(/dev/disk/ata) KDiskDeviceManager::_Scan(/dev/disk/ata/0) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw) found device: /dev/disk/ata/0/master/raw KDiskDeviceManager::_ScanPartition(/dev/disk/ata/0/master/raw) KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1 intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0 intel: ep_std_ops(0x2) KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1 intel: pm_std_ops(0x1) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 0: 0, 104767488, 512) Partition::SetTo(): active: 6f Partition::CheckLocation() - end after session: 1983497949184 (session: 104767488) intel: _ParsePrimary(): partition 0: bad location, ignoring Partition::SetTo(): active: 74 Partition::SetTo(): active: 0 Partition::SetTo(): active: 0 returned: 0.5 KDiskSystem::Load(): file_systems/bfs/v1 -> 1 trying: file_systems/bfs/v1 returned: 0.8 KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0 intel: pm_std_ops(0x2) KDiskSystem::Load(): file_systems/devfs/v1 -> 1 trying: file_systems/devfs/v1 returned: -1 KDiskSystem::Unload(): file_systems/devfs/v1 -> 0 KDiskSystem::Load(): file_systems/rootfs/v1 -> 1 trying: file_systems/rootfs/v1 returned: -1 KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0 scanning with: file_systems/bfs/v1 KDiskSystem::Load(): file_systems/bfs/v1 -> 2 KDiskSystem::Unload(): file_systems/bfs/v1 -> 1 device 0: /dev/disk/ata/0/master/raw media status: No error device flags: 2 offset: 0 size: 104767488 (99.914 MB) content size: 104765440 block size: 2048 child count: 0 index: -1 status: 0 flags: 3 volume: -1 disk system: file_systems/bfs/v1 name: content name: Haiku type: content type: Be File System params: content params: bfs: mounted "Haiku" (root node at 2053, device = /dev/disk/ata/0/master/raw) module: Search for file_cache/launch_speedup/v1 failed. partitioning system: partitioning_systems/session/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1) KDiskSystem::Load(): partitioning_systems/session/v1 -> 1 KDiskSystem::Unload(): partitioning_systems/session/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/fat/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1) KDiskSystem::Load(): file_systems/fat/v1 -> 1 KDiskSystem::Unload(): file_systems/fat/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/iso9660/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1) KDiskSystem::Load(): file_systems/iso9660/v1 -> 1 KDiskSystem::Unload(): file_systems/iso9660/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error KDiskDeviceManager::_Scan(/dev/disk) con_init: trying module console/frame_buffer/v1 loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/console loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/dprintf loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/keyboard loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/null loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/random loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/tty loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/zero ahci: ahci_supports_device KDiskDeviceManager::_Scan(/dev/disk/ata) KDiskDeviceManager::_Scan(/dev/disk/ata/0) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw) KDiskDeviceManager::_Scan(/dev/disk/scsi) devfs: "scsi_cd" api_version missing devfs: "scsi_cd" mandatory driver symbol(s) missing! devfs: "scsi_disk" api_version missing devfs: "scsi_disk" mandatory driver symbol(s) missing! KDiskDeviceManager::_Scan(/dev/disk/usb) loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/usb/usb_disk KDiskDeviceManager::_Scan(/dev/disk/virtual) nbd:>init_hardware() nbd:>init_driver() allocate_commpage_entry(4, 34) -> 0xffff0118 set_memory_write_back base 0 length 10000000 find_nearest 10000000 0 solutions: 0x10000000 allocate MTRR slot 0, base = 0, length = 10000000, type=0x6 kernel debugger extension "debugger/hangman/v1": loaded kernel debugger extension "debugger/invalidate_on_exit/v1": loaded allocate MTRR slot 1, base = f0000000, length = 400000, type=0x1 publish device: node 0x90cc4240, path disk/ata/0/master/raw, module generic/block_io/device_v1 REG: Failed to open shadow passwd DB file "/etc/shadow": No such file or directory bfs: bfs_open_dir:1461: Invalid Argument register_domain(1, internet) unregister_domain(0x910739c0, 1, internet) register_domain(9, unix) unregister_domain(0x91092360, 9, unix) register_domain(1, internet) get_device_interface: ask "network/devices/ethernet/v1" for loop get_device_interface: ask "network/devices/loopback/v1" for loop 3com: init_hardware(0x802b81a8) 3com: no hardware found. etherpci: init_driver init_driver: etherpci not found ipro100: init_hardware(0x802b6b50) ipro100: no hardware found. ipro1000: init_hardware(0x802d2888) ipro1000, found Intel(R) PRO/1000 Network Connection Version - 6.5.3 at 6 ipro1000: init_driver(0x802d2888) [ipro1000] (em) Memory Access and/or Bus Master bits were not set! [ipro1000] (em) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1, 0x2) [ipro1000] (em) bus_alloc_resource(4, [32], 0x0, 0xffffffff, 0x1, 0x2) [ipro1000] (em) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1, 0x6) if_initname(0x910a2800, em, 3) [ipro1000] ipro1000: /dev/net/ipro1000/0 Adding entry for Ethernet 10baseT/UTP Adding entry for Ethernet 10baseT/UTP Adding entry for Ethernet 100baseTX Adding entry for Ethernet 100baseTX Adding entry for Ethernet 1000baseTX Adding entry for Ethernet 1000baseTX Adding entry for Ethernet autoselect ifmedia_set: target Ethernet autoselect ifmedia_set: setting to Ethernet autoselect [ipro1000] (em) Link is up 1000 Mbps Full Duplex loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/ipro1000 marvell_yukon: init_hardware(0x80517090) marvell_yukon: no hardware found. nforce: init_hardware(0x805147a0) nforce: no hardware found. rtl8139: init_hardware(0x80510b38) rtl8139: no hardware found. syskonnect: init_hardware(0x80516a88) syskonnect: no hardware found. usb_uhci: no devices found usb_ohci: no devices found usb_ehci: no devices found USB Stack: no bus managers available via_rhine: init_hardware(0x80510f80) via_rhine: no hardware found. bfs: bfs_open_dir:1461: Invalid Argument get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/ipro1000/0 ipv4_datalink_init(/dev/net/ipro1000/0) [net/ipro1000/0] compat_open(0x2) ifmedia_ioctl: switching em to Ethernet autoselect /dev/net/ipro1000/0: media change, media 0x900030 quality 1000 speed 1000000 register_domain(4, link) intel_extreme: init_hardware() Radeon - init_hardware: Version: 5.1.6.0 Radeon - Radeon_CardDetect: no supported devices found S3: init_hardware() - no supported devices vesa: init_hardware() vesa: init_driver() vesa: publish_devices() vesa: find_device() loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/graphics/vesa vesa: vesa_init() completed successfully! vesa: acc: vesa.accelerant ps2_hid: init_hardware ps2_hid: init_driver ps2_hid: publish_devices ps2_hid: uninit_driver loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/ps2_hid usb_uhci: no devices found usb_ohci: no devices found usb_ehci: no devices found USB Stack: no bus managers available usb_uhci: no devices found usb_ohci: no devices found usb_ehci: no devices found USB Stack: no bus managers available wacom: cannot get module "bus_managers/usb/v3" bfs: bfs_open_dir:1461: Invalid Argument ps2: devfs_publish_device input/mouse/ps2/0, status = 0x00000000 ps2: probe_mouse Extended PS/2 mouse found emuxki: init_hardware() ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000 ps2: keyboard found Running post install script /boot/common/boot/post_install/mime_update.sh ... cx23882: init_hardware() auich: init_hardware() auvia: init_hardware() loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/audio/hmulti/emuxki ahci: ahci_supports_device ahci: ahci_supports_device usb_uhci: no devices found usb_ohci: no devices found usb_ehci: no devices found USB Stack: no bus managers available vm_soft_fault: va 0x14 not covered by area in address space vm_page_fault: vm_soft_fault returned error 'Bad address' on fault at 0x14, ip 0x3ee6e4, write 1, user 1, thread 0x98 vm_page_fault: sending team "Tracker" 0x52 SIGSEGV, ip 0x3ee6e4 ("libbe.so_seg0ro" +0x1ec6e4) stack trace: 0x0033b951 (libbe.so_seg0ro + 0x139951) 0x00342074 (libbe.so_seg0ro + 0x140074) 0x00341f83 (libbe.so_seg0ro + 0x13ff83) 0x003420be (libbe.so_seg0ro + 0x1400be) 0x00342191 (libbe.so_seg0ro + 0x140191) 0x00347d4f (libbe.so_seg0ro + 0x145d4f) 0x004f4f21 (libtracker.so_seg0ro + 0x77f21) 0x005067ce (libtracker.so_seg0ro + 0x897ce) 0x002b0dd0 (libbe.so_seg0ro + 0xaedd0) 0x0062f5ac (libroot.so_seg0ro + 0x245ac) 0x70184fec (w>TrackerWindow_152_stack + 0x3ffec) vm_soft_fault: va 0x0 not covered by area in address space vm_page_fault: vm_soft_fault returned error 'Bad address' on fault at 0x0, ip 0x80094060, write 0, user 0, thread 0x98 debug_server: Thread 152 entered the debugger: Segment violation stack trace, current PC 0x3ee6e4 _ZTS11BArchivable + 0: (0x70184e0c) 0x33b951 _ZN5BView9_SetOwnerEP7BWindow + 0x89 (0x70184e3c) 0x342074 _ZN5BView7_DetachEv + 0x126 (0x70184e6c) 0x341f83 _ZN5BView7_DetachEv + 0x35 (0x70184e9c) 0x3420be _ZN5BView11_RemoveSelfEv + 0x3e (0x70184edc) 0x342191 _ZN5BView10RemoveSelfEv + 0x47 (0x70184efc) 0x347d4f _ZN7BWindowD2Ev + 0xb3 (0x70184f3c) 0x4f4f21 _ZN8BPrivate16BContainerWindowD2Ev + 0x13f (0x70184f6c) 0x5067ce _ZN8BPrivate11BDeskWindowD0Ev + 0xe2 (0x70184f9c) 0x2b0dd0 _ZN7BLooper7_task0_EPv + 0x40 (0x70184fbc) 0x62f5ac _thread_do_exit_notification + 0x78 (closest symbol)