APM version 1.2 available, flags 3. smp_acpi_probe: entry base 0x9fc00, limit 0xa0000 smp_acpi_probe: entry base 0xf0000, limit 0x100000 smp_acpi_probe: found ACPI RSDP signature at 0x000f6c60 smp: using ACPI to detect MP configuration smp: found rsdp at 0x000f6c60 oem id: PTLTD smp: rsdp points to rsdt at 0x3fefab68 smp: searching 3 entries for APIC information smp: skipping uninteresting header 'FACP' smp: local apic address is 0xfee00000 smp: found local APIC with id 0 smp: found io APIC with id 1 and address 0xfec00000 VESA version = 2.0 oem string: V M ware, Inc. VBE support 2.0 120: 320 x 200 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 121: 320 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 122: 640 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 123: 640 x 480 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 124: 800 x 600 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 125: 1024 x 768 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 126: 1152 x 864 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 127: 1280 x 960 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 128: 1280 x 1024 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 129: 1400 x 1050 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12a: 1600 x 1200 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12b: 1792 x 1344 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12c: 1856 x 1392 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12d: 1920 x 1440 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 12e: 320 x 200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 12f: 320 x 400 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 130: 640 x 400 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 131: 640 x 480 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 132: 800 x 600 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 133: 1024 x 768 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 134: 1152 x 864 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 135: 1280 x 960 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 136: 1280 x 1024 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 137: 1400 x 1050 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 138: 1600 x 1200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 139: 1792 x 1344 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13a: 1856 x 1392 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13b: 1920 x 1440 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13c: 320 x 200 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13d: 320 x 400 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13e: 640 x 400 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 13f: 640 x 480 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 140: 800 x 600 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 141: 1024 x 768 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 142: 1152 x 864 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 143: 1280 x 960 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 144: 1280 x 1024 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 145: 1400 x 1050 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 146: 1600 x 1200 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 147: 1792 x 1344 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 148: 1856 x 1392 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 149: 1920 x 1440 x 32 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 100: 640 x 400 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 101: 640 x 480 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 103: 800 x 600 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 105: 1024 x 768 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 107: 1280 x 1024 x 8 (a = 187, mem = 4, phy = f0000000, p = 1, b = 1) 10e: 320 x 200 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 111: 640 x 480 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 114: 800 x 600 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 117: 1024 x 768 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) 11a: 1280 x 1024 x 16 (a = 187, mem = 6, phy = f0000000, p = 1, b = 1) VESA compatible graphics! EDID1: 0 Welcome to the Haiku boot loader! number of drives: 1 add_partitions_for(0x00105460, mountFS = no) add_partitions_for(fd = 0, mountFS = no) 0x001055b4 Partition::Partition 0x001055b4 Partition::Scan() check for partitioning_system: Amiga Partition Map check for partitioning_system: EFI GUID Partition Map check for partitioning_system: Intel Partition Map intel: pm_identify_partition(1, 1070516: 0, 2146959360, 512) Partition::SetTo(): active: 6f Partition::CheckLocation() - end after session: 1983497949184 (session: 2146959360) intel: _ParsePrimary(): partition 0: bad location, ignoring Partition::SetTo(): active: 74 Partition::SetTo(): active: 0 Partition::SetTo(): active: 0 priority: 500 check for partitioning_system: Intel Extended Partition check for partitioning_system: Apple Partition Map boot partition offset: 0 0x001055b4 Partition::_Mount check for file_system: BFS Filesystem load kernel... unhandled pheader type 0x6 unhandled pheader type 0x3 video mode: 1024x768x32 kernel entry at 800320dc Welcome to kernel debugger output! Haiku revision: 26128 CPU 0: type 0 family 15 extended_family 0 model 4 extended_model 2 stepping 2, string 'AuthenticAMD' CPU 0: vendor 'AMD' model name 'Mobile AMD Athlon(tm) 64 Processor 3400+' CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh mmx fxsr sse sse2 sse3 syscall nx mmxext ffxsr long 3dnowext 3dnow heap_attach: attached to 0x90b57000 - usable range 0x90b6c000 - 0x91b57000 slab: init base 0x91b57000 + 0x2000 vm_mark_page_range_inuse: page 0x9f in non-free state 7! initialize_commpage_syscall(): sysenter/sysexit supported allocate_commpage_entry(3, 5) -> 0xffff0100 allocate_commpage_entry(2, 12) -> 0xffff0108 apm_init() code32: 0xf000, 0x5643, length 0xffff code16: 0xf000, length 0xffff data: 0x40, length 0xffff heap_attach: attached to 0x80300000 - usable range 0x80302000 - 0x80400000 Could not register image "usb_disk": Bad argument type passed to function PCI: pci_module_init PCI: mechanism 1 controller found PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0080 to 0x008c PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7190, revision 01 PCI: class_base 06, class_function 00, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7190: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (Virtual Machine Chipset) PCI: info: Bridge (Host bridge) PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (empty list) PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7191, revision 01 PCI: class_base 06, class_function 04, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7191: 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge PCI: info: Bridge (PCI bridge, Normal decode) PCI: line_size 00, latency 00, header_type 01, BIST 00 PCI: subsystem_id 0000, subsystem_vendor_id 0000 PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 40 PCI: io_base_upper_16 0000, io_base f0 PCI: io_limit_upper_16 0000, io_limit 00 PCI: memory_base fff0, memory_limit 0000 PCI: prefetchable_memory_base_upper32 00000000, prefetchable_memory_base fff0 PCI: prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit 0000 PCI: bridge_control 0080, secondary_status 02a0 PCI: interrupt_line 00, interrupt_pin 00 PCI: ROM base host 00000000, pci 00000000, size ?? PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 0: vendor 8086, device 7110, revision 08 PCI: class_base 06, class_function 01, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7110: 82371AB/EB/MB PIIX4 ISA (Virtual Machine Chipset) PCI: info: Bridge (ISA bridge) PCI: line_size 00, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 1: vendor 8086, device 7111, revision 01 PCI: class_base 01, class_function 01, class_api 8a PCI: vendor 8086: Intel Corporation PCI: device 7111: 82371AB/EB/MB PIIX4 IDE (Virtual Machine Chipset) PCI: info: Mass storage controller (IDE interface) PCI: line_size 00, latency 40, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00001050, pci 00001050, size 00000010, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 2: vendor 8086, device 7112, revision 00 PCI: class_base 0c, class_function 03, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7112: 82371AB/EB/MB PIIX4 USB (Virtual Machine Chipset) PCI: info: Serial bus controller (USB Controller, UHCI) PCI: line_size 00, latency 40, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line 09, interrupt_pin 04, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00001060, pci 00001060, size 00000020, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 3: vendor 8086, device 7113, revision 08 PCI: class_base 06, class_function 80, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI (Virtual Machine Chipset) PCI: info: Bridge PCI: line_size 00, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1976, subsystem_vendor_id 15ad PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 15, function 0: vendor 15ad, device 0405, revision 00 PCI: class_base 03, class_function 00, class_api 00 PCI: vendor 15ad: VMware Inc PCI: device 0405: Abstract SVGA II Adapter PCI: info: Display controller (VGA compatible controller, VGA controller) PCI: line_size 08, latency 40, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00008000 PCI: cardbus_CIS 00000000, subsystem_id 0405, subsystem_vendor_id 15ad PCI: interrupt_line ff, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 000010c0, pci 000010c0, size 00000010, flags 01 PCI: base reg 1: host f0000000, pci f0000000, size 08000000, flags 00 PCI: base reg 2: host e8000000, pci e8000000, size 00800000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (empty list) PCI: [dom 0, bus 0] bus 0, device 16, function 0: vendor 8086, device 100f, revision 01 PCI: class_base 02, class_function 00, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 100f: 82545EM Gigabit Ethernet Controller (Copper) (Abstract PRO/1000 MT Single Port Adapter) PCI: info: Network controller (Ethernet controller) PCI: line_size 10, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00010000 PCI: cardbus_CIS 00000000, subsystem_id 0750, subsystem_vendor_id 15ad PCI: interrupt_line 09, interrupt_pin 01, min_grant ff, max_latency 00 PCI: base reg 0: host e8820000, pci e8820000, size 00020000, flags 04 PCI: base reg 1: host 00000000, pci 00000000, size 00000010, flags 0f PCI: base reg 2: host e8800000, pci e8800000, size 00010000, flags 04 PCI: base reg 3: host 00000000, pci 00000000, size 00000010, flags 0f PCI: base reg 4: host 000010d0, pci 000010d0, size 00000010, flags 09 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, PCI-X PCI: [dom 0, bus 0] bus 0, device 17, function 0: vendor 1274, device 1371, revision 02 PCI: class_base 04, class_function 01, class_api 00 PCI: vendor 1274: Ensoniq PCI: device 1371: ES1371 [AudioPCI-97] (Creative Sound Blaster AudioPCI64V, AudioPCI128) PCI: info: Multimedia controller (Multimedia audio controller) PCI: line_size 00, latency 40, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1371, subsystem_vendor_id 1274 PCI: interrupt_line 0b, interrupt_pin 01, min_grant 06, max_latency ff PCI: base reg 0: host 00001080, pci 00001080, size 00000040, flags 01 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) usb_uhci: successfully started the controller usb_ohci: no devices found usb_ehci: no devices found get_boot_partitions(): boot volume message: field: "booted from image", type: BOOL (0x424f4f4c): [ 0] false field: "partition offset", type: LLNG (0x4c4c4e47): [ 0] 0 (0x0) field: "boot method", type: LONG (0x4c4f4e47): [ 0] 0 (0x0) field: "boot drive number", type: LLNG (0x4c4c4e47): [ 0] 128 (0x80) field: "disk identifier", type: RAWT (0x52415754): [ 0] data: "0x8070d638", 80 bytes get_boot_partitions(): boot method type: 0 partitioning system: partitioning_systems/intel/extended/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1) KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1 intel: ep_std_ops(0x1) KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0 intel: ep_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error partitioning system: partitioning_systems/intel/map/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1) KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1 intel: pm_std_ops(0x1) KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0 intel: pm_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/bfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1) KDiskSystem::Load(): file_systems/bfs/v1 -> 1 KDiskSystem::Unload(): file_systems/bfs/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/devfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1) KDiskSystem::Load(): file_systems/devfs/v1 -> 1 KDiskSystem::Unload(): file_systems/devfs/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/rootfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1) KDiskSystem::Load(): file_systems/rootfs/v1 -> 1 KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error number of disk systems: 5 KDiskDeviceManager::_Scan(/dev/disk) PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14 PCI-IDE: init channel... PCI-IDE: channel index 0 PCI-IDE: bus master base 0x1050 PCI-IDE: init channel done IDE: scan_device_worker: bus 0x90cee100, device-number 0 IDE: create_device: bus 0x90cee100, device-number 0 IDE: setup_device_links: bus 0x90cee100, device 0x90ca7c00 IDE: scan_device_int: device 0x90ca7c00, atapi 0 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: got a fast response IDE: scan_device_int: device found IDE: scan_device_worker: bus 0x90cee100, device-number 1 IDE: create_device: bus 0x90cee100, device-number 1 IDE: setup_device_links: bus 0x90cee100, device 0x90cf5000 IDE: scan_device_int: device 0x90cf5000, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x90cf5000, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x00 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x90cf5000 IDE: cleanup_device_links: device 0x90cf5000 IDE: scan_device_worker: bus 0x90cee100, device-number 0 IDE: destroy_device: device 0x90ca7c00 IDE: cleanup_device_links: device 0x90ca7c00 IDE: create_device: bus 0x90cee100, device-number 0 IDE: setup_device_links: bus 0x90cee100, device 0x90ca7c00 IDE: scan_device_int: device 0x90ca7c00, atapi 0 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: got a fast response IDE: scan_device_int: device found IDE: scan_device_worker: bus 0x90cee100, device-number 1 IDE: create_device: bus 0x90cee100, device-number 1 IDE: setup_device_links: bus 0x90cee100, device 0x90cf5000 IDE: scan_device_int: device 0x90cf5000, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x90cf5000, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x00 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x90cf5000 IDE: cleanup_device_links: device 0x90cf5000 publish device: node 0x90cacd80, path disk/ata/0/master/raw, module generic/block_io/device_v1 PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15 PCI-IDE: init channel... PCI-IDE: channel index 1 PCI-IDE: bus master base 0x1058 PCI-IDE: init channel done IDE: scan_device_worker: bus 0x90cee300, device-number 0 IDE: create_device: bus 0x90cee300, device-number 0 IDE: setup_device_links: bus 0x90cee300, device 0x90cf8000 IDE: scan_device_int: device 0x90cf8000, atapi 0 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: got a fast response IDE: scan_device_int: error bit set - no device or wrong type (status: 0x51) IDE: scan_device_int: device 0x90cf8000, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: got a fast response IDE: scan_device_int: device found IDE: scan_device_worker: bus 0x90cee300, device-number 1 IDE: create_device: bus 0x90cee300, device-number 1 IDE: setup_device_links: bus 0x90cee300, device 0x90cf8400 IDE: scan_device_int: device 0x90cf8400, atapi 0 IDE: scan_device_int: send_command failed IDE: destroy_device: device 0x90cf8400 IDE: cleanup_device_links: device 0x90cf8400 IDE: scan_device_worker: bus 0x90cee300, device-number 0 IDE: destroy_device: device 0x90cf8000 IDE: cleanup_device_links: device 0x90cf8000 IDE: create_device: bus 0x90cee300, device-number 0 IDE: setup_device_links: bus 0x90cee300, device 0x90cf8000 IDE: scan_device_int: device 0x90cf8000, atapi 0 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: got a fast response IDE: scan_device_int: error bit set - no device or wrong type (status: 0x51) IDE: scan_device_int: device 0x90cf8000, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: got a fast response IDE: scan_device_int: device found IDE: scan_device_worker: bus 0x90cee300, device-number 1 IDE: create_device: bus 0x90cee300, device-number 1 IDE: setup_device_links: bus 0x90cee300, device 0x90cf8400 IDE: scan_device_int: device 0x90cf8400, atapi 0 IDE: scan_device_int: send_command failed IDE: destroy_device: device 0x90cf8400 IDE: cleanup_device_links: device 0x90cf8400 publish device: node 0x90cf6420, path disk/atapi/1/master/raw, module generic/block_io/device_v1 ahci: ahci_supports_device KDiskDeviceManager::_Scan(/dev/disk/ata) KDiskDeviceManager::_Scan(/dev/disk/ata/0) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw) found device: /dev/disk/ata/0/master/raw KDiskDeviceManager::_Scan(/dev/disk/atapi) KDiskDeviceManager::_Scan(/dev/disk/atapi/1) KDiskDeviceManager::_Scan(/dev/disk/atapi/1/master) KDiskDeviceManager::_Scan(/dev/disk/atapi/1/master/raw) found device: /dev/disk/atapi/1/master/raw KDiskDeviceManager::_ScanPartition(/dev/disk/ata/0/master/raw) KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1 intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0 intel: ep_std_ops(0x2) KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1 intel: pm_std_ops(0x1) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 0: 0, 2146959360, 512) Partition::SetTo(): active: 6f Partition::CheckLocation() - end after session: 1983497949184 (session: 2146959360) intel: _ParsePrimary(): partition 0: bad location, ignoring Partition::SetTo(): active: 74 Partition::SetTo(): active: 0 Partition::SetTo(): active: 0 returned: 0.5 KDiskSystem::Load(): file_systems/bfs/v1 -> 1 trying: file_systems/bfs/v1 returned: 0.8 KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0 intel: pm_std_ops(0x2) KDiskSystem::Load(): file_systems/devfs/v1 -> 1 trying: file_systems/devfs/v1 returned: -1 KDiskSystem::Unload(): file_systems/devfs/v1 -> 0 KDiskSystem::Load(): file_systems/rootfs/v1 -> 1 trying: file_systems/rootfs/v1 returned: -1 KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0 scanning with: file_systems/bfs/v1 KDiskSystem::Load(): file_systems/bfs/v1 -> 2 KDiskSystem::Unload(): file_systems/bfs/v1 -> 1 device 0: /dev/disk/ata/0/master/raw media status: No error device flags: 2 offset: 0 size: 2146959360 (2047.5 MB) content size: 2146957312 block size: 2048 child count: 0 index: -1 status: 0 flags: 3 volume: -1 disk system: file_systems/bfs/v1 name: content name: Haiku type: content type: Be File System params: content params: device 1: /dev/disk/atapi/1/master/raw media status: No media present device flags: 5 bfs: mounted "Haiku" (root node at 262144, device = /dev/disk/ata/0/master/raw) module: Search for file_cache/launch_speedup/v1 failed. partitioning system: partitioning_systems/session/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1) KDiskSystem::Load(): partitioning_systems/session/v1 -> 1 KDiskSystem::Unload(): partitioning_systems/session/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error "/boot/home/config/add-ons/kernel/file_systems/npipefs": could not resolve symbol 'new_lock' Could not load kernel add-on "/boot/home/config/add-ons/kernel/file_systems/npipefs": Symbol not found load_module_image(/boot/home/config/add-ons/kernel/file_systems/npipefs) failed: Symbol not found file system: file_systems/fat/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1) KDiskSystem::Load(): file_systems/fat/v1 -> 1 KDiskSystem::Unload(): file_systems/fat/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/iso9660/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1) KDiskSystem::Load(): file_systems/iso9660/v1 -> 1 KDiskSystem::Unload(): file_systems/iso9660/v1 -> 0 KDiskDeviceManager::_AddDiskSystem() done: No error KDiskDeviceManager::_Scan(/dev/disk) con_init: trying module console/frame_buffer/v1 loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/console loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/dprintf loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/keyboard loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/null loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/random loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/tty loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/zero ahci: ahci_supports_device KDiskDeviceManager::_Scan(/dev/disk/ata) KDiskDeviceManager::_Scan(/dev/disk/ata/0) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master) KDiskDeviceManager::_Scan(/dev/disk/ata/0/master/raw) KDiskDeviceManager::_Scan(/dev/disk/atapi) KDiskDeviceManager::_Scan(/dev/disk/atapi/1) KDiskDeviceManager::_Scan(/dev/disk/atapi/1/master) KDiskDeviceManager::_Scan(/dev/disk/atapi/1/master/raw) KDiskDeviceManager::_Scan(/dev/disk/floppy) config_manager: driver module: init driver_get_next_device_info(bus = 0, cookie = 0) loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/floppy/pc_floppy KDiskDeviceManager::_Scan(/dev/disk/scsi) devfs: "scsi_cd" api_version missing devfs: "scsi_cd" mandatory driver symbol(s) missing! devfs: "scsi_disk" api_version missing devfs: "scsi_disk" mandatory driver symbol(s) missing! KDiskDeviceManager::_Scan(/dev/disk/usb) loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/usb/usb_disk KDiskDeviceManager::_Scan(/dev/disk/virtual) nbd:>init_hardware() nbd:>init_driver() allocate_commpage_entry(4, 34) -> 0xffff0118 set_memory_write_back base 0 length 40000000 find_nearest 40000000 0 solutions: 0x40000000 allocate MTRR slot 0, base = 0, length = 40000000, type=0x6 kernel debugger extension "debugger/hangman/v1": loaded kernel debugger extension "debugger/invalidate_on_exit/v1": loaded allocate MTRR slot 1, base = f0000000, length = 400000, type=0x1 publish device: node 0x90de2960, path disk/atapi/1/master/raw, module generic/block_io/device_v1 publish device: node 0x90de2900, path disk/ata/0/master/raw, module generic/block_io/device_v1 REG: Failed to open shadow passwd DB file "/etc/shadow": No such file or directory bfs: bfs_open_dir:1461: Invalid Argument register_domain(1, internet) unregister_domain(0x91258300, 1, internet) register_domain(9, unix) unregister_domain(0x91258c60, 9, unix) register_domain(1, internet) get_device_interface: ask "network/devices/ethernet/v1" for loop get_device_interface: ask "network/devices/loopback/v1" for loop 3com: init_hardware(0x802e18b8) 3com: no hardware found. etherpci: init_driver init_driver: etherpci not found ipro100: init_hardware(0x802dee84) ipro100: no hardware found. ipro1000: init_hardware(0x802fd724) ipro1000, found Intel(R) PRO/1000 Network Connection Version - 6.5.3 at 7 ipro1000: init_driver(0x802fd724) [ipro1000] (em) Memory Access and/or Bus Master bits were not set! [ipro1000] (em) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1, 0x2) [ipro1000] (em) bus_alloc_resource(4, [32], 0x0, 0xffffffff, 0x1, 0x2) [ipro1000] (em) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1, 0x6) if_initname(0x9122dc00, em, 3) [ipro1000] ipro1000: /dev/net/ipro1000/0 Adding entry for Ethernet 10baseT/UTP Adding entry for Ethernet 10baseT/UTP Adding entry for Ethernet 100baseTX Adding entry for Ethernet 100baseTX Adding entry for Ethernet 1000baseTX Adding entry for Ethernet 1000baseTX Adding entry for Ethernet autoselect ifmedia_set: target Ethernet autoselect ifmedia_set: setting to Ethernet autoselect [ipro1000] (em) Link is up 1000 Mbps Full Duplex loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/ipro1000 marvell_yukon: init_hardware(0x8076bbbc) marvell_yukon: no hardware found. nforce: init_hardware(0x8053dc38) nforce: no hardware found. rtl8139: init_hardware(0x80539e40) rtl8139: no hardware found. syskonnect: init_hardware(0x8076b1d8) syskonnect: no hardware found. loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/usb_ecm via_rhine: init_hardware(0x8053a1b8) via_rhine: no hardware found. bfs: bfs_open_dir:1461: Invalid Argument get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/ipro1000/0 ipv4_datalink_init(/dev/net/ipro1000/0) [net/ipro1000/0] compat_open(0x2) ifmedia_ioctl: switching em to Ethernet autoselect /dev/net/ipro1000/0: media change, media 0x900030 quality 1000 speed 1000000 register_domain(4, link) intel_extreme: init_hardware() Radeon - init_hardware: Version: 5.1.6.0 Radeon - Radeon_CardDetect: no supported devices found S3: init_hardware() - no supported devices vesa: init_hardware() vesa: init_driver() vesa: publish_devices() vesa: find_device() loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/graphics/vesa vesa: vesa_init() completed successfully! vesa: acc: vesa.accelerant ps2_hid: init_hardware ps2_hid: init_driver ps2_hid: publish_devices ps2_hid: uninit_driver loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/ps2_hid loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/usb_hid loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/input/wacom ps2: devfs_publish_device input/mouse/ps2/0, status = 0x00000000 ps2: probe_mouse Extended PS/2 mouse found ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000 bfs: bfs_create_index:1941: File or Directory already exists emuxki: init_hardware() ps2: keyboard found bfs: bfs_open_dir:1461: Invalid Argument cx23882: init_hardware() auich: init_hardware() auvia: init_hardware() loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/audio/hmulti/emuxki bfs: bfs_create_index:1941: File or Directory already exists bfs: bfs_create_index:1941: File or Directory already exists ahci: ahci_supports_device ahci: ahci_supports_device loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/bus/usb_raw heap_attach: attached to 0x96800000 - usable range 0x9680b000 - 0x97000000 bfs: bfs_open_dir:1461: Invalid Argument bfs: bfs_open_dir:1461: Invalid Argument heap_attach: attached to 0x99800000 - usable range 0x9980b000 - 0x9a000000 bfs: Insert:1306: Name in use bfs: Insert:1306: Name in use Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. heap_attach: attached to 0x9c000000 - usable range 0x9c00b000 - 0x9c800000 bfs: Insert:1306: Name in use bfs: Insert:1306: Name in use Last message repeated 2 times. libnetwork.so running in R5 compatibility mode. bfs: Insert:1306: Name in use bfs: Insert:1306: Name in use Last message repeated 2 times. Last message repeated 2 times. heap_attach: attached to 0x9d000000 - usable range 0x9d00b000 - 0x9d800000 bfs: Insert:1306: Name in use bfs: Insert:1306: Name in use bfs: Insert:1306: Name in use bfs: Insert:1306: Name in use Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 4 times. libnetwork.so running in R5 compatibility mode. bfs: Insert:1306: Name in use bfs: Insert:1306: Name in use Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. Last message repeated 2 times. heap_attach: attached to 0x9e800000 - usable range 0x9e80b000 - 0x9f000000 bfs: Insert:1306: Name in use bfs: Insert:1306: Name in use Last message repeated 2 times. Last message repeated 2 times. PANIC: page fault, but interrupts were disabled. Touching address 0x00000008 from eip 0x80031e85 Welcome to Kernel Debugging Land... Running on CPU 0 kdebug> s bt  sc stack trace for thread 15211 "sh" kernel stack: 0x9a80b000 to 0x9a80f000 user stack: 0x7efef000 to 0x7ffef000 frame caller :function + offset 9a80ea48 (+ 48) 8004b8f9 :invoke_debugger_command + 0x00ed 9a80ea78 (+ 64) 8004b6f1 :invoke_pipe_segment__FP21debugger_command_pipelPc + 0x0079 9a80eab8 (+ 64) 8004ba39 :invoke_debugger_command_pipe + 0x009d 9a80eaf8 (+ 48) 8004c914 :_ParseCommandPipe__16ExpressionParserRi + 0x0234 9a80eb28 (+ 48) 8004c2ca :EvaluateCommand__16ExpressionParserPCcRi + 0x01de 9a80eb58 (+ 224) 8004dce0 :evaluate_debug_command + 0x0088 9a80ec38 (+ 64) 80049f0a :kernel_debugger_loop__Fv + 0x017a 9a80ec78 (+ 48) 8004a93b :kernel_debugger + 0x0117 9a80eca8 (+ 192) 8004a819 :panic + 0x0029 9a80ed68 (+ 48) 800a09e4 :page_fault_exception + 0x0060 9a80ed98 (+ 12) 800a412a :int_bottom + 0x002a (nearest) iframe at 0x9a80eda4 (end = 0x9a80edfc) eax 0x91383800 ebx 0x0 ecx 0x800db5dc edx 0x3b6b esi 0x9e907900 edi 0x0 ebp 0x9a80ee1c esp 0x9a80edd8 eip 0x80031e85 eflags 0x10086 vector: 0xe, error code: 0x0 9a80eda4 (+ 120) 80031e85 :_mutex_unlock + 0x0045 9a80ee1c (+ 256) 80097510 :vm_soft_fault__FUlbT1 + 0x0e28 9a80ef1c (+ 64) 80096486 :vm_page_fault + 0x002e 9a80ef5c (+ 64) 800a0a35 :page_fault_exception + 0x00b1 9a80ef9c (+ 12) 800a4193 :int_bottom_user + 0x005a (nearest) iframe at 0x9a80efa8 (end = 0x9a80f000) eax 0x18031018 ebx 0x341348 ecx 0x0 edx 0xa esi 0x180303d0 edi 0x18031018 ebp 0x7ffeeb0c esp 0x9a80efdc eip 0x2c7c45 eflags 0x10206 user esp 0x7ffeeae4 vector: 0xe, error code: 0x6 9a80efa8 (+ 0) 002c7c45 :__Q28BPrivate10superblockiiPQ28BPrivate9hoardHeap + 0x0131 7ffeeb0c (+ 48) 002c80fd :makeSuperblock__Q28BPrivate10superblockiPQ28BPrivate11processHeap + 0x02f9 7ffeeb3c (+ 80) 002c8bff :malloc__Q28BPrivate10threadHeapUl + 0x0abf 7ffeeb8c (+ 48) 002c8f34 :malloc + 0x0154 7ffeebbc (+ 48) 00248a4d <_APP_>:xmalloc + 0x0021 7ffeebec (+ 48) 00277c0e <_APP_>:strvec_create + 0x0022 7ffeec1c (+ 96) 0022b90b <_APP_>:merge_temporary_env + 0x005f (nearest) 7ffeec7c (+ 48) 0022bb1e <_APP_>:merge_temporary_env + 0x0272 (nearest) 7ffeecac (+ 48) 0022bfbd <_APP_>:maybe_make_export_env + 0x00ed 7ffeecdc (+ 96) 00226c31 <_APP_>:execute_command_internal + 0x2e8d (nearest) 7ffeed3c (+ 96) 00224262 <_APP_>:execute_command_internal + 0x04be 7ffeed9c (+ 96) 00225142 <_APP_>:execute_command_internal + 0x139e (nearest) 7ffeedfc (+ 64) 002253b0 <_APP_>:execute_command_internal + 0x160c (nearest) 7ffeee3c (+ 96) 002244e4 <_APP_>:execute_command_internal + 0x0740 7ffeee9c (+ 80) 00267972 <_APP_>:parse_and_execute + 0x03ea 7ffeeeec (+ 48) 0021e7f3 <_APP_>:disable_priv_mode + 0x02db (nearest) 7ffeef1c (+ 96) 0021da0a <_APP_>:main + 0x06da 7ffeef7c (+ 48) 0021679f <_APP_>:_start + 0x005b 7ffeefac (+ 48) 001008ea 503395:runtime_loader_seg0ro@0x00100000 + 0x8ea 7ffeefdc (+ 0) 7ffeefec 503394:sh_main_stack@0x7efef000 + 0xffffec kdebug> *