smp: using ACPI to detect MP configuration smp: Failed to find MADT! smp_mp_probe: entry base 0x9fc00, limit 0xa0000 smp_mp_probe: entry base 0xf0000, limit 0x100000 VESA version = 2.0 OEM string: Matrox Graphics Inc. 100: 640 x 400 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) 101: 640 x 480 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) 102: 800 x 600 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1) 103: 800 x 600 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) 105: 1024 x 768 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) 107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) 108: 80 x 60 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1) 109: 132 x 25 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1) 10a: 132 x 43 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1) 10b: 132 x 50 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1) 10c: 132 x 60 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1) 110: 640 x 480 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 111: 640 x 480 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 112: 640 x 480 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 113: 800 x 600 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 114: 800 x 600 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 115: 800 x 600 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 116: 1024 x 768 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 117: 1024 x 768 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 11c: 1600 x 1200 x 8 (a = 155, mem = 4, phy = d8000000, p = 1, b = 1) 118: 1024 x 768 x 32 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 119: 1280 x 1024 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 11d: 1600 x 1200 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) 11e: 1600 x 1200 x 16 (a = 155, mem = 6, phy = d8000000, p = 1, b = 1) VESA compatible graphics! Welcome to the Haiku boot loader! platform_add_boot_device found !PXE at 0x0009ce70 PXE API entrypoint at 9c7f:035e size of boot archive "haiku-netboot.tgz": 1588879 successfully opened TFTP connection, packet size 16015 TFTP: Successfully received file add_partitions_for(0x0011723c, mountFS = no) add_partitions_for(fd = 0, mountFS = no) 0x001172b0 Partition::Partition 0x001172b0 Partition::Scan() check for partitioning_system: Amiga Partition Map check for partitioning_system: EFI GUID Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition check for partitioning_system: Apple Partition Map fatfs: cannot mount (bad superblock ?) platform_get_boot_partition 0x001172b0 Partition::_Mount check for file_system: BFS Filesystem 0x001172b0 Partition::_Mount check for file_system: AmigaFFS Filesystem 0x001172b0 Partition::_Mount check for file_system: FAT32 Filesystem fatfs: cannot mount (bad superblock ?) 0x001172b0 Partition::_Mount check for file_system: TAR Filesystem load kernel... platform_register_boot_device video mode: 1024x768x32 ˙heap_add_area: area -1 added to small heap 0x8221f000 - usable range 0x8222c000 - 0x82a1f000 heap_add_area: area -1 added to medium heap 0x82a1f000 - usable range 0x82a20000 - 0x82eeb000 heap_add_area: area -1 added to large heap 0x82eebccc - usable range 0x82eed000 - 0x8321f000 slab: init base 0x8321f000 + 0x2000 vm_mark_page_range_inuse: page 0x9c in non-free state 7! vm_mark_page_range_inuse: page 0x9d in non-free state 7! vm_mark_page_range_inuse: page 0x9e in non-free state 7! vm_mark_page_range_inuse: page 0x9f in non-free state 7! no local apic available initialize_commpage_syscall(): sysenter/sysexit supported allocate_commpage_entry(3, 5) -> 0xffff0100 arch_init_timer: using PIT timer. allocate_commpage_entry(2, 12) -> 0xffff0108 apm_init() code32: 0xf000, 0x7f30, length 0x0 code16: 0xf000, length 0xbf0 data: 0xfdfa, length 0x0 heap_add_area: area -1 added to grow heap 0x80700000 - usable range 0x80702000 - 0x80800000 heap_add_area: area -1 added to VIP I/O heap heap 0x80800000 - usable range 0x80 802000 - 0x80900000 vip_io_request_allocator_init(): created VIP I/O heap: 0x80800000 PCI: pci_module_init PCI: mechanism 1 controller found PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0088 to 0x0 089 PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7190, revision 03 PCI: class_base 06, class_function 00, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7190: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge PCI: info: Bridge (Host bridge) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host d0000000, pci d0000000, size 04000000, flags 08 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: AGP PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7191, revision 03 PCI: class_base 06, class_function 04, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7191: 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge PCI: info: Bridge (PCI bridge, Normal decode) PCI: line_size 00, latency 40, header_type 01, BIST 00 PCI: subsystem_id 0000, subsystem_vendor_id 0000 PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 2 0 PCI: io_base_upper_16 0000, io_base f0 PCI: io_limit_upper_16 0000, io_limit 00 PCI: memory_base d400, memory_limit d7f0 PCI: prefetchable_memory_base_upper32 00000000, prefetchable_memory_base d80 0 PCI: prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit d8f 0 PCI: bridge_control 0089, secondary_status 02a0 PCI: interrupt_line 00, interrupt_pin 00 PCI: ROM base host 00000000, pci 00000000, size ?? PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 1] bus 1, device 0, function 0: vendor 102b, device 0521, revision 01 PCI: class_base 03, class_function 00, class_api 00 PCI: vendor 102b: Matrox Graphics, Inc. PCI: device 0521: MGA G200 AGP (Millennium G200 AGP) PCI: info: Display controller (VGA compatible controller, VGA controller) PCI: line_size 08, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00010000 PCI: cardbus_CIS 00000000, subsystem_id ff03, subsystem_vendor_id 102b PCI: interrupt_line 09, interrupt_pin 01, min_grant 10, max_latency 20 PCI: base reg 0: host d8000000, pci d8000000, size 01000000, flags 08 PCI: base reg 1: host d4000000, pci d4000000, size 00004000, flags 00 PCI: base reg 2: host d5000000, pci d5000000, size 00800000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM, AGP PCI: [dom 0, bus 0] bus 0, device 7, function 0: vendor 8086, device 7110, revision 02 PCI: class_base 06, class_function 01, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7110: 82371AB/EB/MB PIIX4 ISA PCI: info: Bridge (ISA bridge) PCI: line_size 00, latency 00, header_type 80, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 1: vendor 8086, device 7111, revision 01 PCI: class_base 01, class_function 01, class_api 80 PCI: vendor 8086: Intel Corporation PCI: device 7111: 82371AB/EB/MB PIIX4 IDE PCI: info: Mass storage controller (IDE interface) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 0000f000, pci 0000f000, size 00000010, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 2: vendor 8086, device 7112, revision 01 PCI: class_base 0c, class_function 03, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7112: 82371AB/EB/MB PIIX4 USB PCI: info: Serial bus controller (USB Controller, UHCI) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 05, interrupt_pin 04, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 0000e000, pci 0000e000, size 00000020, flags 01 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 7, function 3: vendor 8086, device 7113, revision 02 PCI: class_base 06, class_function 80, class_api 00 PCI: vendor 8086: Intel Corporation PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI PCI: info: Bridge PCI: line_size 00, latency 00, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: (not supported) PCI: [dom 0, bus 0] bus 0, device 11, function 0: vendor 1274, device 1371, revision 02 PCI: class_base 04, class_function 01, class_api 00 PCI: vendor 1274: Ensoniq PCI: device 1371: ES1371 [AudioPCI-97] (Creative Sound Blaster AudioPCI64V, Au dioPCI128) PCI: info: Multimedia controller (Multimedia audio controller) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 1371, subsystem_vendor_id 1274 PCI: interrupt_line 0a, interrupt_pin 01, min_grant 0c, max_latency 80 PCI: base reg 0: host 0000e400, pci 0000e400, size 00000040, flags 01 PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM PCI: [dom 0, bus 0] bus 0, device 13, function 0: vendor 10ec, device 8139, revision 10 PCI: class_base 02, class_function 00, class_api 00 PCI: vendor 10ec: Realtek Semiconductor Co., Ltd. PCI: device 8139: RTL-8139/8139C/8139C+ (RT8139) PCI: info: Network controller (Ethernet controller) PCI: line_size 00, latency 20, header_type 00, BIST 00 PCI: ROM base host 00000000, pci 00000000, size 00000000 PCI: cardbus_CIS 00000000, subsystem_id 8139, subsystem_vendor_id 10ec PCI: interrupt_line 0b, interrupt_pin 01, min_grant 20, max_latency 40 PCI: base reg 0: host 0000e800, pci 0000e800, size 00000100, flags 01 PCI: base reg 1: host d9000000, pci d9000000, size 00000100, flags 00 PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 PCI: Capabilities: PM devfs_add_preloaded_drivers: Failed to add "wb840" vlance: init hardware vlance: init_driver devfs_add_preloaded_drivers: Failed to add "vlance" via_rhine: init_hardware(0x81a107b8) via_rhine: no hardware found. devfs_add_preloaded_drivers: Failed to add "via_rhine" devfs_add_preloaded_drivers: Failed to add "sis900" devfs_add_preloaded_drivers: Failed to add "rtl8169" rtl8139: init_hardware(0x8199832c) [rtl8139] (rl) bus_alloc_resource(4, [16], 0x0, 0xffffffff, 0x1, 0x2) rtl8139, found RealTek 8139 10/100BaseTX at 8 rtl8139: init_driver(0x8199832c) [rtl8139] (rl) bus_alloc_resource(4, [16], 0x0, 0xffffffff, 0x1, 0x2) [rtl8139] (rl) bus_alloc_resource(4, [16], 0x0, 0xffffffff, 0x1, 0x2) [rtl8139] (rl) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1, 0x6) [rtl8139] () Found MII: rlphy Adding entry for Ethernet 100baseTX [rtl8139] () Adding entry for Ethernet 10baseT/UTP 10baseTAdding entry for Ethernet 10baseT/UTP , 10baseT-FDXAdding entry for Ethernet 100baseTX , 100baseTXAdding entry for Ethernet 100baseTX , 100baseTX-FDXAdding entry for Ethernet autoselect , auto ifmedia_set: target Ethernet autoselect ifmedia_set: setting to Ethernet autoselect if_initname(0x82a5a6c0, rl, 3) [rtl8139] rtl8139: /dev/net/rtl8139/0 marvell_yukon: init_hardware(0x818aa238) marvell_yukon: no hardware found. devfs_add_preloaded_drivers: Failed to add "marvell_yukon" ipro1000: init_hardware(0x8185fe44) ipro1000: no hardware found. devfs_add_preloaded_drivers: Failed to add "ipro1000" ipro100: init_hardware(0x8182c384) ipro100: no hardware found. devfs_add_preloaded_drivers: Failed to add "ipro100" etherpci: init_driver init_driver: etherpci not found devfs_add_preloaded_drivers: Failed to add "etherpci" 3com: init_hardware(0x81710038) 3com: no hardware found. devfs_add_preloaded_drivers: Failed to add "3com" get_boot_partitions(): boot volume message: KMessage: buffer: 0x819fd24c (size/capacity: 256/256), flags: 0x0lx field: "partition offset" (LLNG): 0 (0x0) field: "boot method" (LONG): 2 (0x2) field: "client MAC" (LLNG): 310653681032 (0x485466fd88) field: "client IP" (LONG): -1062731721 (0xffffffffc0a80037) field: "server IP" (LONG): -1062731761 (0xffffffffc0a8000f) field: "server port" (LONG): 69 (0x45) get_boot_partitions(): boot method type: 2 module: Search for network/notifications/v1 failed. networking stack notifications could not be initialized: No such file or directo ry register_domain(1, internet) unregister_domain(0x8224e7f8, 1, internet) register_domain(1, internet) register_domain(4, link) NetStackInitializer: scanning device /dev/net/rtl8139/0 get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/rtl8139/0 ipv4_datalink_init(/dev/net/rtl8139/0) [net/rtl8139/0] compat_open(0x2) ifmedia_ioctl: switching rl to Ethernet autoselect /dev/net/rtl8139/0: media change, media 0x22 quality 1000 speed 10000 NetStackInitializer: found ethernet interface with MAC address 00:48:54:66:fd:88 ; which is the one we're looking for NetStackInitializer: successfully configured boot network interface NetBootMethod::Init(): net stack initialized; root path is: partitioning system: partitioning_systems/intel/extended/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1) intel: ep_std_ops(0x1) intel: ep_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error partitioning system: partitioning_systems/intel/map/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1) intel: pm_std_ops(0x1) intel: pm_std_ops(0x2) KDiskDeviceManager::_AddDiskSystem() done: No error partitioning system: partitioning_systems/session/v1 KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/bfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/devfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/iso9660/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/rootfs/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1) KDiskDeviceManager::_AddDiskSystem() done: No error file system: file_systems/fat/v1 KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1) KDiskDeviceManager::_AddDiskSystem() done: No error number of disk systems: 8 KDiskDeviceManager::_Scan(/dev/disk) PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14 PCI-IDE: init channel... PCI-IDE: channel index 0 PCI-IDE: bus master base 0xf000 PCI-IDE: init channel done IDE: scan_device_worker: bus 0x8223b8c4, device-number 0 IDE: create_device: bus 0x8223b8c4, device-number 0 IDE: setup_device_links: bus 0x8223b8c4, device 0x82a5aaa0 IDE: scan_device_int: device 0x82a5aaa0, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x82a5aaa0, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x00 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x82a5aaa0 IDE: cleanup_device_links: device 0x82a5aaa0 IDE: scan_device_worker: bus 0x8223b8c4, device-number 1 IDE: create_device: bus 0x8223b8c4, device-number 1 IDE: setup_device_links: bus 0x8223b8c4, device 0x82a5aaa0 IDE: scan_device_int: device 0x82a5aaa0, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x82a5aaa0, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x00 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x82a5aaa0 IDE: cleanup_device_links: device 0x82a5aaa0 IDE: scan_device_worker: bus 0x8223b8c4, device-number 0 IDE: create_device: bus 0x8223b8c4, device-number 0 IDE: setup_device_links: bus 0x8223b8c4, device 0x82a5aaa0 IDE: scan_device_int: device 0x82a5aaa0, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x82a5aaa0, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x00 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x82a5aaa0 IDE: cleanup_device_links: device 0x82a5aaa0 IDE: scan_device_worker: bus 0x8223b8c4, device-number 1 IDE: create_device: bus 0x8223b8c4, device-number 1 IDE: setup_device_links: bus 0x8223b8c4, device 0x82a5aaa0 IDE: scan_device_int: device 0x82a5aaa0, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x82a5aaa0, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x4c IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x82a5aaa0 IDE: cleanup_device_links: device 0x82a5aaa0 PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15 PCI-IDE: init channel... PCI-IDE: channel index 1 PCI-IDE: bus master base 0xf008 PCI-IDE: init channel done IDE: scan_device_worker: bus 0x8223b990, device-number 0 IDE: create_device: bus 0x8223b990, device-number 0 IDE: setup_device_links: bus 0x8223b990, device 0x82a5aaa0 IDE: scan_device_int: device 0x82a5aaa0, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x82a5aaa0, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x58 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x82a5aaa0 IDE: cleanup_device_links: device 0x82a5aaa0 IDE: scan_device_worker: bus 0x8223b990, device-number 1 IDE: create_device: bus 0x8223b990, device-number 1 IDE: setup_device_links: bus 0x8223b990, device 0x82a5aaa0 IDE: scan_device_int: device 0x82a5aaa0, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x82a5aaa0, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x01 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x82a5aaa0 IDE: cleanup_device_links: device 0x82a5aaa0 IDE: scan_device_worker: bus 0x8223b990, device-number 0 IDE: create_device: bus 0x8223b990, device-number 0 IDE: setup_device_links: bus 0x8223b990, device 0x82a5aaa0 IDE: scan_device_int: device 0x82a5aaa0, atapi 0 ide: reset_device() device 0x82a5aaa0 ide: reset_device() device 0x82a5aaa0 failed, calling reset_bus ide: reset_bus() device 0x82a5aaa0, bus 0x8223b990 ide: reset_bus() device 0x82a5aaa0, bus 0x8223b990 success IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x82a5aaa0, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x58 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x82a5aaa0 IDE: cleanup_device_links: device 0x82a5aaa0 IDE: scan_device_worker: bus 0x8223b990, device-number 1 IDE: create_device: bus 0x8223b990, device-number 1 IDE: setup_device_links: bus 0x8223b990, device 0x82a5aaa0 IDE: scan_device_int: device 0x82a5aaa0, atapi 0 IDE: scan_device_int: send_command failed IDE: scan_device_int: device 0x82a5aaa0, atapi 1 IDE: scan_device_int: waiting 100ms... IDE: scan_device_int: no fast response to inquiry IDE: scan_device_int: status 0x01 IDE: scan_device_int: busy bit not set after 100ms - probably noone there IDE: scan_device_int: aborting because busy bit not set IDE: destroy_device: device 0x82a5aaa0 IDE: cleanup_device_links: device 0x82a5aaa0 ahci: ahci_supports_device ahci: ahci_supports_device KDiskDeviceManager::_Scan(/dev/disk/virtual) KDiskDeviceManager::_Scan(/dev/disk/virtual/remote_disk) KDiskDeviceManager::_Scan(/dev/disk/virtual/remote_disk/0) KDiskDeviceManager::_Scan(/dev/disk/virtual/remote_disk/0/raw) found device: /dev/disk/virtual/remote_disk/0/raw KDiskDeviceManager::_ScanPartition(/dev/disk/virtual/remote_disk/0/raw) intel: ep_std_ops(0x1) trying: partitioning_systems/intel/extended/v1 returned: -1 intel: ep_std_ops(0x2) intel: pm_std_ops(0x1) trying: partitioning_systems/intel/map/v1 intel: pm_identify_partition(0, 0: 0, 241172480, 1024) returned: -1 intel: pm_std_ops(0x2) trying: partitioning_systems/session/v1 returned: -1 trying: file_systems/bfs/v1 returned: -1 trying: file_systems/devfs/v1 returned: -1 trying: file_systems/iso9660/v1 identify(0, 0x822312f0) returned: -1 trying: file_systems/rootfs/v1 returned: -1 trying: file_systems/fat/v1 returned: -1 device 0: /dev/disk/virtual/remote_disk/0/raw media status: No error device flags: 3 offset: 0 size: 241172480 (230 MB) content size: 0 block size: 1024 child count: 0 index: -1 status: 2 flags: 1 volume: -1 disk system: name: content name: type: content type: params: content params: PANIC: did not find any boot partitions! Welcome to Kernel Debugging Land... Thread 12 "main2" running on CPU 0 kdebug>