Opened 6 years ago
Last modified 2 years ago
#14260 new bug
iprowifi3945 goes "no link" every 5 minutes
Reported by: | ttcoder | Owned by: | waddlesplash |
---|---|---|---|
Priority: | normal | Milestone: | Unscheduled |
Component: | Drivers/Network/iprowifi3945 | Version: | R1/Development |
Keywords: | Cc: | ||
Blocked By: | Blocking: | ||
Platform: | All |
Description
On my primary laptop (lenovo R61), wi-fi is less reliable in the newer hrevs: the connection is lost after a few minutes, then after about 15 seconds, the link comes back up and I can resume browsing the web. Rince and repeat every few minutes.
DHCP is not even renegotiated (does not get mentionned in the syslog at any rate), the link just comes back up. So this seems to be a driver issue.
Didn't try to go "static" (vs DHCP). But in previous hrevs (freebsd9 drivers?) the connection was solid. For instance in hrev50465
Let me know if you need any info, try builds ..etc to help with this, as we go into the beta1 dev cycle
Attachments (5)
Change History (29)
comment:3 by , 6 years ago
@waddlesplash - Running a USB thumbdrive with hrev52079 (so that my production environment remains pristine); but I can update it as needed
by , 6 years ago
Attachment: | syslog_sample added |
---|
when wifi goes down and then back up : mentions "firmware error", "authentication expired" and other interesting things
comment:4 by , 6 years ago
If you could try a FreeBSD 11.1 image and see if it behaves the same there, that would be helpful.
comment:5 by , 6 years ago
Also, perhaps try using the older firmware -- i.e. blacklist the existing firmware, and drop https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/iwlwifi-3945-2.ucode into the appropriate non-packaged directory. It seems Linux still uses that firmware, anyway.
comment:6 by , 6 years ago
Try re-testing after hrev52091; I've disabled hardware AES which the FreeBSD developers suggested.
comment:7 by , 6 years ago
I'm getting linkdown/linkup notifications sometimes as well. It reconnects quite fast here but that may depend on the AP being used (unencrypted public wifi, so no WPA negociation needed).
comment:8 by , 6 years ago
@waddlesplash No change with the alternate firmware in place:
But I believe this is because the alternate and base one are the same by for byte:
/boot/system/non-packaged/data/firmware/iprowifi3945> cmp iwlwifi-3945-2.ucode /boot/system/data/firmware/iprowifi3945/iwlwifi-3945-2.ucode /boot/system/non-packaged/data/firmware/iprowifi3945>
(ran that before the blacklisting came into effect on reboot of course)
Can't find another file for 3945 in the directory listing over at https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/
Do you remember what prompted you to think of an alternate firmware file? Maybe you actually found one and just pasted the wrong link ? I'm all setup for trying another one if we find one :-)
This is with hrev52094 so includes the AES encryption change BTW
Misc details:
I see DHCP renewals in syslog, now. Maybe there were there before and eluded me.
Trying FreeBSD on this laptop is a bit of a long shot... Maybe if there exists a "FreeBSD on USB thumbdrive" thing like exists with Haiku..
--- EDIT: found some files, experimenting, will report back soon
comment:9 by , 6 years ago
@waddlesplash so I actually was able to test, with the files below (sound right? they look legit)
Found a half dozen firmwares via http://www.intellinuxwireless.org/ : https://wireless.wiki.kernel.org/en/users/drivers/iwlegacy Had to rename the older files as they are suffixed "-1" instead of "-2" and the driver was failing to find the firmware
Test results:
- iwlwifi-3945-ucode-15.28.1.6 : net disappears before login, exactly as in ticket #14266 (!)
- iwlwifi-3945-ucode-15.28.1.8 : intermittent "no link"
- iwlwifi-3945-ucode-15.28.2.8 : intermittent "no link"
- iwlwifi-3945-ucode-15.32.2.9 : intermittent "no link"
So going back to older firmwares, things are not better.
Worst case, when beta1 comes out I could create a "franken-rev" haiku, mix and match the beta1 image with the old driver; I guess the freebsd stuff is statically linked into each driver, so that idea could work ? If I drop the old driver binary in place, I'll get the old driver code with the old freebsd code, it should work ?
comment:10 by , 6 years ago
Milestone: | R1/beta1 → Unscheduled |
---|
Well, if this only affects one chipset, it's probably not a huge issue then. Removing from beta1.
comment:11 by , 6 years ago
No change in hrev52539
I'm not using this older laptop all that much any more, so no biggie if browsing gets interrupted AFAIC.
FWIW I looked at the syslog 'live' and saw this when the link went down..
KERN: [iprowifi3945] (wpi) fatal firmware error KERN: wpi_fatal_intr: invalid count field (count = 0) KERN: [net/iprowifi3945/0] stop running, 1 vaps running KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: RUN -> INIT (nrunning 0 nscanning 0) KERN: [net/iprowifi3945/0] down parent KERN: ieee80211_notify_scan_done KERN: [net/iprowifi3945/0] ieee80211_newstate_cb: RUN -> INIT arg -1 (2 screens' worth..)
And I think there was this when it came back up
KERN: ieee80211_notify_scan_done KERN: wlan_control: 9235, 76 KERN: ifmedia_ioctl: switching wlan to Type: IEEE 802.11 Wireless Ethernet KERN: Mode: autoselect KERN: SubType: autoselect KERN: wlan_control: 9234, 18 KERN: wlan_control: 9234, 7 (2 screens worth of tracing deleted)
comment:13 by , 6 years ago
Same symptoms cold booting into an hrev52801 USB stick. Syslog mentions "station deauth", plus a DHCP re-negociation (probably was there last time I posted too, just had missed it).
I'll have better news to report about an ipro4965 laptop soon though. But this one however is showing its age and relegated to secondary use, mainly running a pre-pm (!) hrev that runs networking flawlessly (go figure!)
comment:14 by , 5 years ago
Same thing on hrev53992. Installed on HDD. Every 5 minutes it renewal DHCP lease.
comment:15 by , 4 years ago
I've installed beta2 on an HP nc6400 and aside from this issue and what I assume is a lack of a proper touchpad driver (no touchpad preferences anywhere to be seen) it runs perfectly.
In syslog whenever this happens I see:
KERN: [iprowifi3945] (wpi) fatal firmware error KERN: firmware error log (count = 1): KERN: error type = "SYSASSERT" (0x00000005) KERN: error data = 0x0000010B KERN: branch link = 0x000008B60000035E KERN: interrupt link = 0x0000032000000000 KERN: time = 4205944252 KERN: driver status: KERN: tx ring 0: qid=0 cur=5 queued=0 KERN: tx ring 1: qid=1 cur=0 queued=0 KERN: tx ring 2: qid=2 cur=0 queued=0 KERN: tx ring 3: qid=3 cur=4 queued=0 KERN: tx ring 4: qid=4 cur=43 queued=0 KERN: rx ring: cur=58 KERN: [net/iprowifi3945/0] stop running, 1 vaps running KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: RUN -> INIT (nrunning 0 nscanning 0) KERN: [net/iprowifi3945/0] down parent KERN: ieee80211_notify_scan_done KERN: [net/iprowifi3945/0] ieee80211_newstate_cb: RUN -> INIT arg -1 KERN: [net/iprowifi3945/0] sta_newstate: RUN -> INIT (-1) KERN: [net/iprowifi3945/0] ieee80211_ref_node (ieee80211_send_mgmt:2463) 0x8c3ae000<fe:ec:da:f4:d3:60> refcnt 4 KERN: [net/iprowifi3945/0] [fe:ec:da:f4:d3:60] send station disassociate (reason: 8 (sending STA is leaving/has left BSS)) KERN: ieee80211_notify_node_leave KERN: [net/iprowifi3945/0] node_reclaim: remove 0x8c3ae000<fe:ec:da:f4:d3:60> from station table, refcnt 3 KERN: [net/iprowifi3945/0] ieee80211_alloc_node 0x8c3aa000<00:1b:77:33:66:b6> in station table KERN: [net/iprowifi3945/0] [00:1b:77:33:66:b6] ieee80211_alloc_node: inact_reload 2 KERN: ieee80211_notify_radio not implemented, yet. KERN: [net/iprowifi3945/0] start running, 0 vaps running KERN: [net/iprowifi3945/0] ieee80211_start_locked: up parent KERN: /dev/net/iprowifi3945/0: media change, media 0x300a0 quality 1000 speed 0 KERN: wlan_control: 9235, 76 KERN: wlan_control: 9234, 20 KERN: Last message repeated 2 times. KERN: ieee80211_notify_radio not implemented, yet. KERN: [net/iprowifi3945/0] start running, 1 vaps running KERN: ifmedia_ioctl: switching wlan to Type: IEEE 802.11 Wireless Ethernet KERN: Mode: autoselect KERN: SubType: autoselect KERN: wlan_control: 9234, 16 KERN: wlan_control: 9234, 17 KERN: wlan_control: 9234, 26 KERN: wlan_open(0x82a02400) KERN: [net/iprowifi3945/0] ieee80211_init KERN: [net/iprowifi3945/0] start running, 1 vaps running Last message repeated 1 time KERN: wlan_control: 9234, 103 KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0) KERN: [net/iprowifi3945/0] ieee80211_newstate_cb: INIT -> SCAN arg 0 KERN: [net/iprowifi3945/0] sta_newstate: INIT -> SCAN (0) KERN: ieee80211_notify_scan_done KERN: wlan_control: 9235, 76 KERN: ifmedia_ioctl: switching wlan to Type: IEEE 802.11 Wireless Ethernet KERN: Mode: autoselect KERN: SubType: autoselect KERN: wlan_control: 9234, 18 KERN: wlan_control: 9234, 7 KERN: wlan_control: 9234, 95 KERN: wlan_control: 9234, 17 KERN: wlan_control: 9234, 26 KERN: wlan_open(0x82a02400) KERN: [net/iprowifi3945/0] ieee80211_init KERN: [net/iprowifi3945/0] start running, 1 vaps running KERN: wlan_control: 9234, 21 KERN: [net/iprowifi3945/0] [fe:ec:da:f4:d3:60] station assoc via MLME KERN: [net/iprowifi3945/0] ieee80211_alloc_node 0x8c3ae000<fe:ec:da:f4:d3:60> in station table KERN: [net/iprowifi3945/0] [fe:ec:da:f4:d3:60] ieee80211_alloc_node: inact_reload 2 KERN: [net/iprowifi3945/0] node_reclaim: remove 0x8c3aa000<00:1b:77:33:66:b6> from station table, refcnt 0 KERN: [net/iprowifi3945/0] set WME_AC_BE (chan) [acm 0 aifsn 3 logcwmin 4 logcwmax 10 txop 0] KERN: [net/iprowifi3945/0] set WME_AC_BE (bss ) [acm 0 aifsn 3 logcwmin 4 logcwmax 10 txop 0] KERN: [net/iprowifi3945/0] set WME_AC_BK (chan) [acm 0 aifsn 7 logcwmin 4 logcwmax 10 txop 0] KERN: [net/iprowifi3945/0] set WME_AC_BK (bss ) [acm 0 aifsn 7 logcwmin 4 logcwmax 10 txop 0] KERN: [net/iprowifi3945/0] set WME_AC_VI (chan) [acm 0 aifsn 2 logcwmin 3 logcwmax 4 txop 94] KERN: [net/iprowifi3945/0] set WME_AC_VI (bss ) [acm 0 aifsn 2 logcwmin 3 logcwmax 4 txop 94] KERN: [net/iprowifi3945/0] set WME_AC_VO (chan) [acm 0 aifsn 2 logcwmin 2 logcwmax 3 txop 47] KERN: [net/iprowifi3945/0] set WME_AC_VO (bss ) [acm 0 aifsn 2 logcwmin 2 logcwmax 3 txop 47] KERN: [net/iprowifi3945/0] update WME_AC_BE (chan+bss) [acm 0 aifsn 2 logcwmin 4 logcwmax 10 txop 0] KERN: [net/iprowifi3945/0] ieee80211_wme_updateparams_locked: WME params updated, cap_info 0x0 KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: SCAN -> AUTH (nrunning 0 nscanning 0) KERN: [net/iprowifi3945/0] ieee80211_newstate_cb: SCAN -> AUTH arg 192 KERN: [net/iprowifi3945/0] sta_newstate: SCAN -> AUTH (192) KERN: [net/iprowifi3945/0] ieee80211_ref_node (ieee80211_send_mgmt:2463) 0x8c3ae000<fe:ec:da:f4:d3:60> refcnt 3 KERN: [net/iprowifi3945/0] [fe:ec:da:f4:d3:60] recv auth frame with algorithm 0 seq 2 KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: AUTH -> ASSOC (nrunning 0 nscanning 0) KERN: [net/iprowifi3945/0] ieee80211_newstate_cb: AUTH -> ASSOC arg 0 KERN: [net/iprowifi3945/0] sta_newstate: AUTH -> ASSOC (0) KERN: [net/iprowifi3945/0] ieee80211_ref_node (ieee80211_send_mgmt:2463) 0x8c3ae000<fe:ec:da:f4:d3:60> refcnt 3 KERN: [net/iprowifi3945/0] ieee80211_wme_updateparams_locked: WME params updated, cap_info 0x0 KERN: [net/iprowifi3945/0] [fe:ec:da:f4:d3:60] assoc success at aid 7: short preamble, short slot time, QoS KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: ASSOC -> RUN (nrunning 0 nscanning 0) KERN: [net/iprowifi3945/0] ieee80211_newstate_cb: ASSOC -> RUN arg 16 KERN: [net/iprowifi3945/0] sta_newstate: ASSOC -> RUN (16) KERN: ieee80211_notify_node_join KERN: [net/iprowifi3945/0] [fe:ec:da:f4:d3:60] ieee80211_node_authorize: inact_reload 20 KERN: wlan_control: 9235, 15 KERN: /dev/net/iprowifi3945/0: media change, media 0x8300af quality 1000 speed 36000000 KERN: wlan_control: 9235, 1 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Send DHCP_REQUEST for 10.1.1.154 to 255.255.255.255:67 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Received DHCP_NACK from 10.0.1.29 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Send DHCP_DISCOVER to 255.255.255.255:67 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Timeout shift: 500 msecs (try 1) DAEMON 'DHCP': /dev/net/iprowifi3945/0: Send DHCP_DISCOVER to 255.255.255.255:67 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Timeout shift: 1000 msecs (try 2) DAEMON 'DHCP': /dev/net/iprowifi3945/0: Send DHCP_DISCOVER to 255.255.255.255:67 KERN: wlan_control: 9235, 1 KERN: wlan_control: 9235, 15 KERN: wlan_control: 9234, 19 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Timeout shift: 2000 msecs (try 3) DAEMON 'DHCP': /dev/net/iprowifi3945/0: Send DHCP_DISCOVER to 255.255.255.255:67 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Received DHCP_OFFER from 10.1.1.1 DAEMON 'DHCP': your_address: 10.1.1.154 DAEMON 'DHCP': server: 10.1.1.1 DAEMON 'DHCP': lease time: 86400 seconds DAEMON 'DHCP': subnet: 255.255.255.0 DAEMON 'DHCP': gateway: 10.1.1.1 DAEMON 'DHCP': nameserver[0]: 10.1.1.1 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Send DHCP_REQUEST for 10.1.1.154 to 255.255.255.255:67 DAEMON 'DHCP': /dev/net/iprowifi3945/0: Received DHCP_ACK from 10.1.1.1 DAEMON 'DHCP': server: 10.1.1.1 DAEMON 'DHCP': lease time: 86400 seconds DAEMON 'DHCP': subnet: 255.255.255.0 DAEMON 'DHCP': gateway: 10.1.1.1 DAEMON 'DHCP': nameserver[0]: 10.1.1.1 DAEMON 'DHCP': /dev/net/iprowifi3945/0: DHCP status = No error KERN: wlan_control: 9234, 19
comment:16 by , 4 years ago
I did not find anything here that would be a significant difference vs. FreeBSD, so, it seems likely this is actually a FreeBSD driver bug. I did not look upstream for issues however.
comment:18 by , 2 years ago
I upgraded to the latest nightly (hrev56182)but now I just end up in KDL on boot (screenshot: https://www.zx.net.nz/~david/images/haiku_56182_iprowifi3945_kdl.png)
I can type continue and it does make it to the desktop OK, just with no WiFi adapter.
by , 2 years ago
Attachment: | haiku_56182_iprowifi3945_kdl.png added |
---|
comment:19 by , 2 years ago
Please attach KDL photos here, as a general rule.
This is useful, thanks. I'll investigate a bit.
by , 2 years ago
Attachment: | Bruno iprowifi 3945.jpg added |
---|
comment:21 by , 2 years ago
Now on hrev56191 - no more KDL on startup. Wifi seems more stable than before - its no longer failing every 5 minutes. It did reconnect very quickly in the space of 30 minutes or so for no obvious reason but this didn't interrupt an ongoing FTP transfer and there was nothing interesting in syslog.
It did eventually fail in the same way as before though with it fully disconnecting for a few seconds with a bunch of stuff written to syslog - see the end of syslog_hrev56191. There also seems to be a large number of "wlan_control" messages being logged - not sure if this is normal.
by , 2 years ago
Attachment: | syslog_hrev56191 added |
---|
comment:24 by , 2 years ago
This machine has 3GB installed (1GB onboard plus a 2GB SODIMM).
Now on hrev56213 and had a go downloading a 3GB file using FtpPositive. Towards the end of the transfer I ran into the same error as before which you can see in syslog_hrev56213
Edit: will also post a syslog, which includes a "firmware error" message:
Edit2: not sure if it's significant at all, but there are "Tx errors", 39 after an hour or so of light browsing haiku tickets: