Unable to initialize BFS on usb disk

[Giova84]

Since hrev41595 i am unable to initialize bfs on usb disks (usb ext. hard disks, usb sticks and SD cards) using DriveSetup (the "initialize" entry is grey when usb disk is selected). Before "r1a3" branch, i was able to initialize usb disks.

[taos]

Strange, with r1a3-rc-hrev41718, I can choose "Initialize" for unmounted SD cards in an usb card reader:

Only my microSD card currently mounted at /boot can't be initialized - and it wouldn't be advisable to do so with your running system.

[taos]

Initialize unmounted USB disk.

[taos]

Initialize unmounted USB disk.

[Giova84]

I'm downloading hrev41759 (at the moment the last nightly) : once i've tried it out I will update the ticket.

[Giova84]

With r1a3-rc-hrev41759 the bug is still here: if I select any kind of usb disk in DriveSetup (obviously the disk is previously unmounted) the voice "initialize" is gray, unselectable.

A photo as attachment.

[taos]

Tried again with r1a3-rc-hrev41759. All SD cards and USB sticks with FAT32, ext4 and Be File System still show - as soon as unmounted - the option "Initialize" (even if the write protection is on). Only difference I can see at the moment is the file system: I don't have any SD cards formatted with NTFS lying around that I could test - and all my windows style formatted USB sticks and SD cards show at least one partition.

[Giova84]

On all my SD cards (three) i have the write protection set on off. I've tried to format these cards in FAT32, exFAT and NTFS, but i can't initialize them in BFS, inside Haiku. This is reproducible in my two computers.

With previous version of Haiku (before Alpha 3 branch) i was able to initialize them in BFS.

[taos]

Could this problem be hardware related?

I've just had a really silly idea, extremely unlikely because you've tried with two different computers and you can read your usb disks - but did these problems start when IO-APIC was enabled by default? There are a few users experiencing problems with usb devices since then. On the other hand, the problems with usb mice were fixed with hrev41759.

[Giova84]

With the IO-APIC disabled (via optional boot menu) the issue is still present.

In an old Haiku installation (an Alpha2 nightly) i have initialized an SD card with BFS, so, after this, i have booted hrev41759. In this way (SD card formatted as BFS inside Alpha2) i have the "initialize" command active inside Alpha3!

[Giova84]

So, with the last releases of testing Alpha 3, seems that i cannot initialize the usb disks formatted in NTFS, FAT32 and exFAT.

[taos]

After a little more experimenting, I've also found one fat32 usb stick that can't be initialized. It's a 2 GB Sandisk Cruzer Crossfire without a partition (/dev/disk/usb/x/0/raw, x = 0, 1, 2 etc). Except for this one, all my other usb storage devices formatted with FAT32 are identified as device /dev/disk/usb/x/0/raw with partition /dev/disk/usb/x/0/0, x = 0, 1, 2 etc).

Seems Alpha 3 doesn't like usb disks without Intel Partition Map - except if formatted as BFS, of course.

[stippi]

This qualifies as blocker.

[starsseed]

@Giova84
Your disk device is initialized with a Be File system. So It certainly have the 0x55AA MAGIC NUMBER present at the end of the first block of every bootable volume. (it does not write the MBR)

The Intel partitioning system check for this 'flag' and do not initializes a partitioning system if it is present on the disk (to avoid the overwrite of the partition table).

Also the fs-sniffer find the BFS signature in the second sector (even if you install an empty MBR).

So:
Write zeros to the firsts 1024 bytes of your disk device(use dd or DiskProbe), then reboot.
You should be able to create a partitioning system and a BFS partition onto it. (don't forget to create an "ACTIVE" one!).
Also you'll may have to write a working MBR boot code if you want to boot on your "live-USB" key (you can find one on the haiku-anyboot-image or in the ticket #3441 ).

[Giova84]

@starsseed

Yes, i know this method, but i can do it easily from my installation of Haiku Alpha2, initializing the disk with Drive Setup. And for boot on of my USB key with Haiku r1a3, I simple install it on USB, via Haiku's Installer (USB disk initialized inside Alpha2)

[stippi]

It doesn't really matter whether there are workarounds to the problem. It should work from DriveSetup in the first place and it's also clearly a regression compared to Alpha2.

That being said, I have no idea what change may have caused this. On top of that I have probably no time to look into it.

[Giova84]

Replying to stippi:

It doesn't really matter whether there are workarounds to the problem. It should work from DriveSetup in the first place and it's also clearly a regression compared to Alpha2.

That being said, I have no idea what change may have caused this. On top of that I have probably no time to look into it.

I'm completely agree with you.

[mmlr]

Replying to taos:

I've just had a really silly idea, extremely unlikely because you've tried with two different computers and you can read your usb disks - but did these problems start when IO-APIC was enabled by default? There are a few users experiencing problems with usb devices since then. On the other hand, the problems with usb mice were fixed with hrev41759.

Apart from this making no sense (and it's not "USB mice" being fixed, but a very specific interrupt non-routing causing an interrupt overlap with a USB controller and therefore the ports routed to it not working): What "a few users" are you talking about? Please redirect them onto this bug tracker and make sure that such problems get logged in new tickets! I am not aware of any such problems, so I really need to have those reports. Thanks.

[starsseed]

Replying to Giova84:

Yes, i know this method, but i can do it easily from my installation of Haiku Alpha2, initializing the disk with Drive Setup.

Are you sure ? for my own, I don't remember that I ever been able to initialize an Intel partitioning system over a BFS formated disk...

edit:
yes: even if it's not not a regression, we should be able to do that.

[Giova84]

Replying to starsseed:

Are you sure ? for my own, I don't remember that I ever been able to initialize an Intel partitioning system over a BFS formated disk...

I can initialize an Intel partitioning system as Be File System, inside Haiku, as i've said. You can verify by your own.

[tonestone57]

This might relate to BFS, DriveSetup or USB changes. I know Michael was doing some USB changes I think for Alpha 3. Not sure if the other two were changed.

If this only happens to you (or a few others) then I would guess USB changes which is more likely to affect certain computer hardware. BFS & DriveSetup would affect everyone and we would all see this issue. I have to test to see for myself.

Please upload:

(1) syslog - will help see if any hardware issues and
(2) listdev output (listdev > listdev.txt)

1) is really important but 2) helps also. These can provide more clues of what is happening on your computer to fix the issue.

[mmlr]

Replying to tonestone57:

This might relate to BFS, DriveSetup or USB changes. I know Michael was doing some USB changes I think for Alpha 3. Not sure if the other two were changed.

If this only happens to you (or a few others) then I would guess USB changes which is more likely to affect certain computer hardware. BFS & DriveSetup would affect everyone and we would all see this issue. I have to test to see for myself.

No that really makes no sense at all. There were no USB changes related to usb_disk but only to the controllers. However if the controllers were failing then no USB disk access would work, you couldn't read or write anything to the USB device and it'd KDL after a while.

[tonestone57]

Relax Michael. Just a guess on the limited info given. =)

Maybe more clues and better idea once we get his syslog & listdev.

Also, I assume initialize works for his non-USB drives according to the description he gave but not really sure. "i am unable to initialize bfs on usb disks (usb ext. hard disks, usb sticks and SD cards) using DriveSetup (the "initialize" entry is grey when usb disk is selected). Before "r1a3" branch, i was able to initialize usb disks."

Giova84, does that mean you can still initialize PATA or SATA drives in your computer?

I also tested hrev41759 with USB key (FAT32) and SD card (BFS) in USB card reader. Both of these showed initialize for me on my Intel chipset laptop. Looks like the change affecting him could be something hardware specific since this bug did not affect me on my laptop. ie, IRQ or USB or ? issue.

[tonestone57]

I retested DriveSetup and I am having somewhat similar issue.

If I choose the entire internal hard drive or entire usb key then initialize shows up for me. If I select a specific partition on any drive (internal or usb) then initialize does not work. Happens on hrev41759. Partitions are FAT32, NTFS or EXT3.

Giova84 uploaded an image where he selects the entire usb drive and that does not work for him (no initialize) but that actually works for me. Slightly different effect for me. I can initialize whole drives but not partitions with DriveSetup.

I tried using all the safe-options and still same thing.

[tonestone57]

Ok, I checked the DriveSetup revision log and narrowed it down. Then I downloaded 3 images from Haiku files, tested and found that the issue is between hrev39173 (not working) and hrev39021 (working).

Only change in DriveSetup log is hrev39115.

I believe this change is the cause for initialize not working on partitions for me. This may also fix problem for original poster but not sure.

Please fix or revert changes back. Thanks.

[taos]

Replying to mmlr:

Apart from this making no sense (and it's not "USB mice" being fixed, but a very specific interrupt non-routing causing an interrupt overlap with a USB controller and therefore the ports routed to it not working): What "a few users" are you talking about? Please redirect them onto this bug tracker and make sure that such problems get logged in new tickets! I am not aware of any such problems, so I really need to have those reports. Thanks.

First, I'm sorry. I didn't want to jump to conclusions - I've already mentioned that I thought it was very unlikely that the problem was related to recent IO-APIC changes. And you are right, of course, ticket #7520 isn't about a non-working usb mouse, I only referred to it this way because the initial reporter named the ticket "USB mouse can't work when IO-APIC is enabled". I'll try to be more precise the next time. The problems a few users seemed to experience are either reported on bug tracker and have already been taken care of or have resolved for one reason or another. So, nothing to worry about in this regard.

But back to the initialization problem: I now think it's in no way related to computer hardware (and especially usb controllers) - I've experienced the reported problem only with one usb storage device (out of 15), an usb stick that was pre-formatted in an unusual way. All standard fat32 disks (no matter if formatted by linux or windows) show a partition structure (e.g. /dev/disk/usb/0/0/0, linux style: /dev/sda1) and can be initialized by the latest alpha3 rc when the entire disk (/dev/disk/usb/0/0/raw, linux: /dev/sda) is chosen. The one odd usb stick shows a structure like a bfs disk without seperate partitions (only /dev/disk/usb/0/0/raw) and can't be initialized.

[taos]

I've added syslog excerpts for:

1.) an usb stick ("JetFlash", volume is named pkback# 001) that can be initialized ("Syslog_JetFlash.txt")

2.) an usb stick ("Crossfire") that can't be initialized ("Syslog_Crossfire")

I was using r1a3-rc-hrev41789.

[taos]

DriveSetup: USB stick that can be initialized.

[taos]

Syslog excerpt for USB stick that can't be initialized.

[taos]

Syslog for USB stick that can be initialized.

[taos]

DriveSetup: USB stick that can't be initialized.

[korli]

Please check hrev41842 on trunk.

[taos]

Replying to korli:

Please check hrev41842 on trunk.

I'm now able to initialize the one usb stick that I couldn't initialize before. But I can still only choose "Initialize" for partitions on my (IDE) hard disk that are already formatted as BFS (or linux swap).

[tonestone57]

Replying to taos:

But I can still only choose "Initialize" for partitions on my (IDE) hard disk that are already formatted as BFS (or linux swap).

Ok, that seems like same issue I reported up in comments 22 & 23 above. I noticed the same thing using physical drive in Virtualbox. I no longer build images & cannot test changes in trunk.

[korli]

Replying to taos:

I'm now able to initialize the one usb stick that I couldn't initialize before. But I can still only choose "Initialize" for partitions on my (IDE) hard disk that are already formatted as BFS (or linux swap).

I think you have to delete the partition and create another one: if the partition type is FAT32, it won't propose to initialize as BFS.

[scottmc]

I just tried with hrev41857 and it's working again. This same PC and USB drive failed prior to the recent fixes being added. Closing this as fixed.

[taos]

Not sure if this problem is really fixed - at least not for the alpha3 branch. I've tried both r1a3-rc-hrev41884 and DriveSetup from hrev41932 (trunk). My USB stick still can't be initialized - the changes in hrev41842 that solved the problems for this USB stick were reverted with hrev41845. Moreover, it's not possible to delete and recreate an partition on this USB stick. Maybe this ticket should be reopened?

[mmadia]

R1 Alpha 3 has not yet been released. This was with an R1 Alpha 3 Release Candidate image.

[korli]

Unless I miss something, it's not fixed.

[scottmc]

Yeah, I tried again with 2 other USB devices and neither of those are working. So I have one out of three that works, all 3 are different brands.

[Giova84]

I can confirm: the issue is still present.

[stargatefan]

just being nosy, do these usb disk have floppy boot img on them ?

[taos]

I only have one affected device (out of 20) - it's a 2 GB Sandisk Cruzer Crossfire with ​U3 functionality (that I've never used). As far as I remember, these usb sticks were pre-formatted in a certain way to emulate a CD-ROM drive. Unfortunately, I can't remember if I have ever formatted this usb stick myself.

[bonefish]

Please check with hrev42142 (trunk) or later.

[Giova84]

Replying to stargatefan:

just being nosy, do these usb disk have floppy boot img on them ?

These usb disks, as mentioned several times in this ticket, "have" the filesystem FAT32, NTFS and exFAT on them. Nothing about floppy.img

[Giova84]

Replying to bonefish:

Please check with hrev42142 (trunk) or later.

At the moment the last available version on ​http://haiku-files.org/cd/ is hrev42126

[taos]

Replying to bonefish:

Please check with hrev42142 (trunk) or later.

With DriveSetup from hrev42178 (trunk), my USB stick (Sandisk Cruzer Crossfire) can be initialized.

[bonefish]

Thanks, taos! Just to avoid confusion, one of my changes doesn't have made it into the alpha branch yet (currently latest pre-build version hrev42159), so it doesn't help to test with alpha branch images yet. I hope it gets there soon.

[pulkomandy]

Sorry, I just missed it somehow...

Should be in alpha images from 42190 on.

[scottmc]

with hrev42190 it's working ok for me again. I'll let others verify as well before we close it out though.

[akw]

My SSD was affected by this problem. I just re-tested with hrev42190 and everything is working fine again.

Thanks.

[taos]

Tested again with alpha3. "Initialize" can be chosen from menu when my usb stick is plugged in. So, works for me. Should this ticket be closed as fixed?