#8456 closed bug (duplicate)
AMD SB850 support
| Reported by: | pragmavalue | Owned by: | nobody |
|---|---|---|---|
| Priority: | normal | Milestone: | R1 |
| Component: | System/Kernel | Version: | R1/Development |
| Keywords: | AMD SB850 | Cc: | |
| Blocked By: | #8085 | Blocking: | |
| Platform: | All |
Description
my mainboard is Gigabyte GA-870A-UD3
Don't works: PCIDE - AMD SB850 and JMB362 SATA USB
Haiku work only on VirtualBOx
Attachments (4)
Change History (12)
by , 12 years ago
comment:1 by , 12 years ago
comment:2 by , 12 years ago
At which point does it crash/hang? Try to play with different bootloader options. You have given very little information to go on.
comment:3 by , 12 years ago
| Blocked By: | 8085 added |
|---|---|
| Component: | - General → System/Kernel |
| Resolution: | → duplicate |
| Status: | new → closed |
| Type: | enhancement → bug |
Most likely a dupe of #8085.
comment:4 by , 12 years ago
in the bios, disable the legacy ide controller, make sure the ahci/sata controllers are not set to riad but to ahci. I'd bet that will get it to boot.
comment:5 by , 12 years ago
when i enable, in bios, this option my computer don't see any hard divers :/ and windows 7 don't start
follow-up: 7 comment:6 by , 12 years ago
http://support.microsoft.com/kb/922976
that will fix you non boot with windows7
it sounds like you when you setup the pc the bios was set to legacy ide mode, the haiku ahci driver will choke as will a few other features giving you a no boot situation. After you follow the instructions in that link, go into the bios setting and set the bios up so the hdd's are in ahci mode only. That should get haiku to boot.
comment:7 by , 12 years ago
Replying to SeanCollins:
http://support.microsoft.com/kb/922976
that will fix you non boot with windows7
it sounds like you when you setup the pc the bios was set to legacy ide mode, the haiku ahci driver will choke as will a few other features giving you a no boot situation. After you follow the instructions in that link, go into the bios setting and set the bios up so the hdd's are in ahci mode only. That should get haiku to boot.
I enabled AHCI in the BIOS now Haiku wont boot. It would not boot before in IDE mode if the C1E was enabled in the BIOS but on disabling that it would boot. By the way that link did also fix my Windows 7 partition that would not boot in AHCI SATA mode. Is there another bug already about Haiku not booting with AHCI enabled? I might have to post one.
comment:8 by , 12 years ago
Yes, well done on x86-gcc4hybrid 44063 haiku boot up is ok (no safemode, only normal boot). Maybe that patch help us 0001-x86-AMD-C1E-with-no-ARAT-Always-Running-APIC-Timer-i.patch.
Thanks to all
Can you take some pictures of your bios settings ? I attached a log of a 8xx series amd chipset, thats been running fine for a very long time. Also can you enable on screen debugging, I might be able to help you to get that board to boot. Its very likly a ahci configuration issue.