| 1 | === Hard Drives ===
|
|---|
| 2 |
|
|---|
| 3 | HDD-1
|
|---|
| 4 | =====
|
|---|
| 5 |
|
|---|
| 6 | /dev/sda:
|
|---|
| 7 |
|
|---|
| 8 | ATA device, with non-removable media
|
|---|
| 9 | Model Number: SAMSUNG SSD 830 Series
|
|---|
| 10 | Serial Number: S0VZNEAC704596
|
|---|
| 11 | Firmware Revision: CXM03B1Q
|
|---|
| 12 | Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
|
|---|
| 13 | Standards:
|
|---|
| 14 | Used: unknown (minor revision code 0x0031)
|
|---|
| 15 | Supported: 9 8 7 6 5
|
|---|
| 16 | Likely used: 9
|
|---|
| 17 | Configuration:
|
|---|
| 18 | Logical max current
|
|---|
| 19 | cylinders 16383 16383
|
|---|
| 20 | heads 16 16
|
|---|
| 21 | sectors/track 63 63
|
|---|
| 22 | --
|
|---|
| 23 | CHS current addressable sectors: 16514064
|
|---|
| 24 | LBA user addressable sectors: 268435455
|
|---|
| 25 | LBA48 user addressable sectors: 500118192
|
|---|
| 26 | Logical Sector size: 512 bytes
|
|---|
| 27 | Physical Sector size: 512 bytes
|
|---|
| 28 | device size with M = 1024*1024: 244198 MBytes
|
|---|
| 29 | device size with M = 1000*1000: 256060 MBytes (256 GB)
|
|---|
| 30 | cache/buffer size = unknown
|
|---|
| 31 | Nominal Media Rotation Rate: Solid State Device
|
|---|
| 32 | Capabilities:
|
|---|
| 33 | LBA, IORDY(can be disabled)
|
|---|
| 34 | Queue depth: 32
|
|---|
| 35 | Standby timer values: spec'd by Standard, no device specific minimum
|
|---|
| 36 | R/W multiple sector transfer: Max = 16 Current = 16
|
|---|
| 37 | DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
|
|---|
| 38 | Cycle time: min=120ns recommended=120ns
|
|---|
| 39 | PIO: pio0 pio1 pio2 pio3 pio4
|
|---|
| 40 | Cycle time: no flow control=120ns IORDY flow control=120ns
|
|---|
| 41 | Commands/features:
|
|---|
| 42 | Enabled Supported:
|
|---|
| 43 | * SMART feature set
|
|---|
| 44 | Security Mode feature set
|
|---|
| 45 | * Power Management feature set
|
|---|
| 46 | * Write cache
|
|---|
| 47 | * Look-ahead
|
|---|
| 48 | * Host Protected Area feature set
|
|---|
| 49 | * WRITE_BUFFER command
|
|---|
| 50 | * READ_BUFFER command
|
|---|
| 51 | * NOP cmd
|
|---|
| 52 | * DOWNLOAD_MICROCODE
|
|---|
| 53 | SET_MAX security extension
|
|---|
| 54 | * 48-bit Address feature set
|
|---|
| 55 | * Device Configuration Overlay feature set
|
|---|
| 56 | * Mandatory FLUSH_CACHE
|
|---|
| 57 | * FLUSH_CACHE_EXT
|
|---|
| 58 | * SMART error logging
|
|---|
| 59 | * SMART self-test
|
|---|
| 60 | * General Purpose Logging feature set
|
|---|
| 61 | * WRITE_{DMA|MULTIPLE}_FUA_EXT
|
|---|
| 62 | * 64-bit World wide name
|
|---|
| 63 | * {READ,WRITE}_DMA_EXT_GPL commands
|
|---|
| 64 | * Segmented DOWNLOAD_MICROCODE
|
|---|
| 65 | * Gen1 signaling speed (1.5Gb/s)
|
|---|
| 66 | * Gen2 signaling speed (3.0Gb/s)
|
|---|
| 67 | * unknown 76[3]
|
|---|
| 68 | * Native Command Queueing (NCQ)
|
|---|
| 69 | * Phy event counters
|
|---|
| 70 | DMA Setup Auto-Activate optimization
|
|---|
| 71 | Device-initiated interface power management
|
|---|
| 72 | * Software settings preservation
|
|---|
| 73 | * Data Set Management indeterminate TRIM supported
|
|---|
| 74 | Security:
|
|---|
| 75 | Master password revision code = 65534
|
|---|
| 76 | supported
|
|---|
| 77 | not enabled
|
|---|
| 78 | not locked
|
|---|
| 79 | frozen
|
|---|
| 80 | not expired: security count
|
|---|
| 81 | supported: enhanced erase
|
|---|
| 82 | 6min for SECURITY ERASE UNIT. 32min for ENHANCED SECURITY ERASE UNIT.
|
|---|
| 83 | Logical Unit WWN Device Identifier: 5002538043584d30
|
|---|
| 84 | NAA : 5
|
|---|
| 85 | IEEE OUI : 002538
|
|---|
| 86 | Unique ID : 043584d30
|
|---|
| 87 | Checksum: correct
|
|---|
