Dell Mini 10: wireless network adapter doesn't work (bcm4312)

[kneekoo]

My netbook is a Dell Mini 10 with an Intel GMA 500 graphics chip (Poulsbo).

I used the following nightly image: hrev48636-x86_gcc2_hybrid-anyboot

The mouse model is M525 and "lsusb" on Linux shows my mouse receiver as follows: 046d:c52b Logitech, Inc. Unifying Receiver

Here are listusb and listdev:

~> listusb 0000:0000 /dev/bus/usb/0/hub "HAIKU Inc." "UHCI RootHub" ver. 0110 0000:0000 /dev/bus/usb/1/hub "HAIKU Inc." "UHCI RootHub" ver. 0110 0000:0000 /dev/bus/usb/2/hub "HAIKU Inc." "UHCI RootHub" ver. 0110 058f:6387 /dev/bus/usb/3/3 "Alcor Micro Corp." "Flash Drive" ver. 0112 174f:1403 /dev/bus/usb/3/5 "Syntek" "Integrated Webcam" ver. 8b28 0bda:0158 /dev/bus/usb/3/6 "Realtek Semiconductor Corp." "USB 2.0 multicard reader" ver. 5887 0000:0000 /dev/bus/usb/3/hub "HAIKU Inc." "EHCI RootHub" ver. 0200

~> listdev

device Mass storage controller (IDE interface) [1|1|80]

vendor 8086: Intel Corporation device 811a: System Controller Hub (SCH Poulsbo) IDE Controller

device Bridge (ISA bridge) [6|1|0]

vendor 8086: Intel Corporation device 8119: System Controller Hub (SCH Poulsbo) LPC Bridge

device Serial bus controller (USB controller, EHCI) [c|3|20]

vendor 8086: Intel Corporation device 8117: System Controller Hub (SCH Poulsbo) USB EHCI #1

device Serial bus controller (USB controller, UHCI) [c|3|0]

vendor 8086: Intel Corporation device 8116: System Controller Hub (SCH Poulsbo) USB UHCI #3

device Serial bus controller (USB controller, UHCI) [c|3|0]

vendor 8086: Intel Corporation device 8115: System Controller Hub (SCH Poulsbo) USB UHCI #2

device Serial bus controller (USB controller, UHCI) [c|3|0]

vendor 8086: Intel Corporation device 8114: System Controller Hub (SCH Poulsbo) USB UHCI #1

device Network controller [2|80|0]

vendor 14e4: Broadcom Corporation device 4315: BCM4312 802.11b/g LP-PHY

device Bridge (PCI bridge, Normal decode) [6|4|0]

vendor 8086: Intel Corporation device 8112: System Controller Hub (SCH Poulsbo) PCI Express Port 2

device Network controller (Ethernet controller) [2|0|0]

vendor 10ec: Realtek Semiconductor Co., Ltd. device 8136: RTL8101E/RTL8102E PCI Express Fast Ethernet controller

device Bridge (PCI bridge, Normal decode) [6|4|0]

vendor 8086: Intel Corporation device 8110: System Controller Hub (SCH Poulsbo) PCI Express Port 1

device Multimedia controller (Audio device) [4|3|0]

vendor 8086: Intel Corporation device 811b: System Controller Hub (SCH Poulsbo) HD Audio Controller

device Display controller (VGA compatible controller, VGA controller) [3|0|0]

vendor 8086: Intel Corporation device 8108: System Controller Hub (SCH Poulsbo) Graphics Controller

device Bridge (Host bridge) [6|0|0]

vendor 8086: Intel Corporation device 8100: System Controller Hub (SCH Poulsbo)

[kneekoo]

detailed listdev

[kneekoo]

syslog

[pulkomandy]

USB issues are tracked in #11619 (with a patch waiting to be tested) and #9118. Using an USB hub may help. Graphics driver issues are tracked in #5543.

Renaming this ticket to track only the wireless driver issues. The broadcom driver may need a firmware file, have you installed it? You need to use the install-wifi-firmwares.sh script for this (run it from Terminal).