Ticket #3157: dump5

APM version 1.2 available, flags 7.
smp: using ACPI to detect MP configuration
smp: Failed to find MADT!
smp_mp_probe: entry base 0x9fc00, limit 0xa0000
smp_mp_probe: entry base 0xf0000, limit 0x100000
VESA version = 3.0
OEM string: VIA P4N800 PRO

  101: 640 x 480 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  111: 640 x 480 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  112: 640 x 480 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  171: 720 x 480 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  173: 720 x 480 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  175: 720 x 480 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  1b9: 720 x 540 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  1ba: 720 x 540 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  1bb: 720 x 540 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  17c: 720 x 576 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  17e: 720 x 576 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  17f: 720 x 576 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  103: 800 x 600 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  114: 800 x 600 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  115: 800 x 600 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  105: 1024 x 768 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  117: 1024 x 768 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  118: 1024 x 768 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  125: 1280 x 720 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  126: 1280 x 720 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  127: 1280 x 720 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  179: 1280 x 768 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  17a: 1280 x 768 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  17b: 1280 x 768 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  1b6: 1280 x 800 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  1b7: 1280 x 800 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  1b8: 1280 x 800 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  107: 1280 x 1024 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  11b: 1280 x 1024 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  13b: 1400 x 1050 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  13c: 1400 x 1050 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  13e: 1400 x 1050 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  120: 1600 x 1200 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  122: 1600 x 1200 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  124: 1600 x 1200 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  166: 1920 x 1080 x 8 (a = 159, mem = 4, phy = f4000000, p = 1, b = 1)
  167: 1920 x 1080 x 16 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  168: 1920 x 1080 x 32 (a = 155, mem = 6, phy = f4000000, p = 1, b = 1)
  108: 80 x 60 x 4 (a = 15, mem = 0, phy = 0, p = 1, b = 1)
  102: 800 x 600 x 4 (a = 31, mem = 3, phy = 0, p = 4, b = 1)
VESA compatible graphics!
EDID1: 4f
EDID2: ebx 102
EDID3: 4f
Vendor: SAM
Product ID: 440
Serial #: 1212231991
Produced in week/year: 45/2005
EDID version: 1.3
Type: Analog
Size: 34 cm x 27 cm
Gamma=2.2
White (X,Y)=(0.313,0.329)
Supported Future Video Modes:
1280x1024@60Hz (id=32897)
1280x960@60Hz (id=16513)
1152x864@75Hz (id=20337)
Supported VESA Video Modes:
720x400@70
640x480@60
640x480x67
640x480x72
640x480x75
800x600@56
800x600@60
800x600@72
800x600@75
832x624@75
1024x768@60
1024x768@70
1024x768@75
1280x1024@75
1152x870@75
Additional Video Mode:
clock=108 MHz
h: (1280, 1328, 1440, 1688)
v: (1024, 1025, 1028, 1066)
size: 33.8 cm x 27 cm
border: 0 cm x 0 cm
Horizontal frequency range = 30..81 kHz
Vertical frequency range = 56..75 Hz
Maximum pixel clock = 140 MHz
Monitor Name: SyncMaster
Serial Number: HMEYB10385
Welcome to the Haiku boot loader!
number of drives: 1
add_partitions_for(0x001053d0, mountFS = no)
add_partitions_for(fd = 0, mountFS = no)
0x00105524 Partition::Partition
0x00105524 Partition::Scan()
check for partitioning_system: Amiga Partition Map
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
  priority: 810
check for partitioning_system: Intel Extended Partition
check for partitioning_system: Apple Partition Map
fatfs: cannot mount (bad superblock ?)
0x00105678 Partition::Partition
0x00105524 Partition::AddChild 0x00105678
0x00105678 Partition::SetParent 0x00105524
new child partition!
0x00105524 Partition::Scan(): scan child 0x00105678 (start = 32256, size = 120023253504, parent = 0x00105524)!
0x00105678 Partition::Scan()
check for partitioning_system: Amiga Partition Map
check for partitioning_system: EFI GUID Partition Map
check for partitioning_system: Intel Partition Map
check for partitioning_system: Intel Extended Partition
check for partitioning_system: Apple Partition Map
fatfs: cannot mount (bad superblock ?)
0x00105524 Partition::~Partition
0x00105678 Partition::SetParent 0x00000000
boot partition offset: 32256
0x00105678 Partition::_Mount check for file_system: BFS Filesystem
load kernel...
video mode: 1280x1024x32
Could not load "usb_disk" error -2147459069
kernel entry at 8003d9a0
Welcome to kernel debugger output!
Haiku revision: 28366
CPU 0: type 0 family 6 extended_family 0 model 10 extended_model 0 stepping 9, string 'CentaurHauls'
CPU 0: vendor 'Centaur' model name 'VIA Esther processor 1000MHz'
CPU 0: features: fpu vme de pse tsc msr pae mce sep mtrr pge cmov pat clfsh acpi mmx fxsr sse sse2 tm pbe sse3 est tm2 
heap_add_area: area -1 added to small heap 0x81160000 - usable range 0x8116d000 - 0x81960000
heap_add_area: area -1 added to medium heap 0x81960000 - usable range 0x81961000 - 0x81e2c000
heap_add_area: area -1 added to large heap 0x81e2cccc - usable range 0x81e2e000 - 0x82160000
slab: init base 0x82160000 + 0x2000
vm_mark_page_range_inuse: page 0x9f in non-free state 7!
no local apic availabe
initialize_commpage_syscall(): sysenter/sysexit supported
allocate_commpage_entry(3, 5) -> 0xffff0100
arch_init_timer: using PIT timer.
allocate_commpage_entry(2, 12) -> 0xffff0108
apm_init()
  code32: 0xf000, 0x971c, length 0xea95
  code16: 0xf000, length 0x4179
  data: 0xfdf5, length 0x0
heap_add_area: area -1 added to grow heap 0x80a00000 - usable range 0x80a02000 - 0x80b00000
heap_add_area: area -1 added to VIP I/O heap heap 0x80b00000 - usable range 0x80b02000 - 0x80c00000
vip_io_request_allocator_init(): created VIP I/O heap: 0x80b00000
PCI: pci_module_init
PCI: mechanism 1 controller found
PCI: dom 0, bus 0, dev  1, func 0, changed PCI bridge control from 0x000c to 0x002f
PCI: [dom 0, bus  0] bus   0, device  0, function  0: vendor 1106, device 0314, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 0314: CN700/VN800/P4M800CE/Pro Host Bridge
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 08, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id aa08, subsystem_vendor_id 1106
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host e8000000, pci e8000000, size 08000000, flags 08
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: AGP, PM
PCI: [dom 0, bus  0] bus   0, device  0, function  1: vendor 1106, device 1314, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 1314: CN700/VN800/P4M800CE/Pro Host Bridge
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  2: vendor 1106, device 2314, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 2314: CN700/VN800/P4M800CE/Pro Host Bridge
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  3: vendor 1106, device 3208, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3208: PT890 Host Bridge
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  4: vendor 1106, device 4314, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 4314: CN700/VN800/P4M800CE/Pro Host Bridge
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  0, function  7: vendor 1106, device 7314, revision 00
PCI:   class_base 06, class_function 00, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 7314: CN700/VN800/P4M800CE/Pro Host Bridge
PCI:   info: Bridge (Host bridge)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: (not supported)
PCI: [dom 0, bus  0] bus   0, device  1, function  0: vendor 1106, device b198, revision 00
PCI:   class_base 06, class_function 04, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device b198: VT8237 PCI Bridge
PCI:   info: Bridge (PCI bridge, Normal decode)
PCI:   line_size 00, latency 00, header_type 01, BIST 00
PCI:   subsystem_id 0000, subsystem_vendor_id 0070
PCI:   primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 00
PCI:   io_base_upper_16  0000, io_base  b0
PCI:   io_limit_upper_16 0000, io_limit b0
PCI:   memory_base fb00, memory_limit fcf0
PCI:   prefetchable_memory_base_upper32  00000000, prefetchable_memory_base  f400
PCI:   prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit f7f0
PCI:   bridge_control 002f, secondary_status 4220
PCI:   interrupt_line 00, interrupt_pin 00
PCI:   ROM base host 00000000, pci 00000000, size ??
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  1] bus   1, device  0, function  0: vendor 1106, device 3344, revision 01
PCI:   class_base 03, class_function 00, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3344: UniChrome Pro IGP
PCI:   info: Display controller (VGA compatible controller, VGA controller)
PCI:   line_size 00, latency 20, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00010000
PCI:   cardbus_CIS 00000000, subsystem_id 3344, subsystem_vendor_id 1106
PCI:   interrupt_line 0a, interrupt_pin 01, min_grant 02, max_latency 00
PCI:   base reg 0: host f4000000, pci f4000000, size 04000000, flags 08
PCI:   base reg 1: host fb000000, pci fb000000, size 01000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM, AGP
PCI: [dom 0, bus  0] bus   0, device 15, function  0: vendor 1106, device 3149, revision 80
PCI:   class_base 01, class_function 01, class_api 8f
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3149: VIA VT6420 SATA RAID Controller
PCI:   info: Mass storage controller (IDE interface)
PCI:   line_size 00, latency 20, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 3149, subsystem_vendor_id 1106
PCI:   interrupt_line 0b, interrupt_pin 02, min_grant 00, max_latency 00
PCI:   base reg 0: host 0000fc00, pci 0000fc00, size 00000010, flags 09
PCI:   base reg 1: host 0000f800, pci 0000f800, size 00000010, flags 0d
PCI:   base reg 2: host 0000f400, pci 0000f400, size 00000010, flags 09
PCI:   base reg 3: host 0000f000, pci 0000f000, size 00000010, flags 0d
PCI:   base reg 4: host 0000ec00, pci 0000ec00, size 00000010, flags 01
PCI:   base reg 5: host 0000e800, pci 0000e800, size 00000100, flags 01
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 15, function  1: vendor 1106, device 0571, revision 06
PCI:   class_base 01, class_function 01, class_api 8a
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 0571: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE)
PCI:   info: Mass storage controller (IDE interface)
PCI:   line_size 00, latency 20, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 0571, subsystem_vendor_id 1106
PCI:   interrupt_line ff, interrupt_pin 01, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 0000e400, pci 0000e400, size 00000010, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 16, function  0: vendor 1106, device 3038, revision 81
PCI:   class_base 0c, class_function 03, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3038: VT82xxxxx UHCI USB 1.1 Controller
PCI:   info: Serial bus controller (USB Controller, UHCI)
PCI:   line_size 08, latency 20, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 3038, subsystem_vendor_id 1106
PCI:   interrupt_line 0a, interrupt_pin 01, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 0000e000, pci 0000e000, size 00000020, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 16, function  1: vendor 1106, device 3038, revision 81
PCI:   class_base 0c, class_function 03, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3038: VT82xxxxx UHCI USB 1.1 Controller
PCI:   info: Serial bus controller (USB Controller, UHCI)
PCI:   line_size 08, latency 20, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 3038, subsystem_vendor_id 1106
PCI:   interrupt_line 0a, interrupt_pin 01, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 0000dc00, pci 0000dc00, size 00000020, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 16, function  2: vendor 1106, device 3038, revision 81
PCI:   class_base 0c, class_function 03, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3038: VT82xxxxx UHCI USB 1.1 Controller
PCI:   info: Serial bus controller (USB Controller, UHCI)
PCI:   line_size 08, latency 20, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 3038, subsystem_vendor_id 1106
PCI:   interrupt_line 0b, interrupt_pin 02, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 0000d800, pci 0000d800, size 00000020, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 16, function  3: vendor 1106, device 3038, revision 81
PCI:   class_base 0c, class_function 03, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3038: VT82xxxxx UHCI USB 1.1 Controller
PCI:   info: Serial bus controller (USB Controller, UHCI)
PCI:   line_size 08, latency 20, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 3038, subsystem_vendor_id 1106
PCI:   interrupt_line 0b, interrupt_pin 02, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 0000d400, pci 0000d400, size 00000020, flags 01
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 16, function  4: vendor 1106, device 3104, revision 86
PCI:   class_base 0c, class_function 03, class_api 20
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3104: USB 2.0
PCI:   info: Serial bus controller (USB Controller, EHCI)
PCI:   line_size 08, latency 20, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id 3104, subsystem_vendor_id 1106
PCI:   interrupt_line 05, interrupt_pin 03, min_grant 00, max_latency 00
PCI:   base reg 0: host fdfff000, pci fdfff000, size 00000100, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 17, function  0: vendor 1106, device 3227, revision 00
PCI:   class_base 06, class_function 01, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3227: VT8237 ISA bridge [KT600/K8T800/K8T890 South]
PCI:   info: Bridge (ISA bridge)
PCI:   line_size 00, latency 00, header_type 80, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id aa08, subsystem_vendor_id 1106
PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
PCI: [dom 0, bus  0] bus   0, device 17, function  5: vendor 1106, device 3059, revision 60
PCI:   class_base 04, class_function 01, class_api 00
PCI:   vendor 1106: VIA Technologies, Inc.
PCI:   device 3059: VT8233/A/8235/8237 AC97 Audio Controller
PCI:   info: Multimedia controller (Multimedia audio controller)
PCI:   line_size 00, latency 00, header_type 00, BIST 00
PCI:   ROM base host 00000000, pci 00000000, size 00000000
PCI:   cardbus_CIS 00000000, subsystem_id aa08, subsystem_vendor_id 1106
PCI:   interrupt_line 05, interrupt_pin 03, min_grant 00, max_latency 00
PCI:   base reg 0: host 0000d000, pci 0000d000, size 00000100, flags 01
PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
PCI:   Capabilities: PM
acpi: ACPI disabled
get_boot_partitions(): boot volume message:
KMessage: buffer: 0x809560fc (size/capacity: 316/316), flags: 0x0lx
  field: "booted from image" (BOOL): false
  field: "partition offset"  (LLNG): 32256 (0x7e00)
  field: "boot method"       (LONG): 0 (0x0)
  field: "boot drive number" (LLNG): 128 (0x80)
  field: "disk identifier"   (RAWT): data at 0x809561e8, 80 bytes
get_boot_partitions(): boot method type: 0
partitioning system: partitioning_systems/intel/extended/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1)
intel: ep_std_ops(0x1)
intel: ep_std_ops(0x2)
KDiskDeviceManager::_AddDiskSystem() done: No error
partitioning system: partitioning_systems/intel/map/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1)
intel: pm_std_ops(0x1)
intel: pm_std_ops(0x2)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/bfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/devfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/rootfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
number of disk systems: 5
KDiskDeviceManager::_Scan(/dev/disk)
PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
PCI-IDE: init channel...
PCI-IDE: channel index 0
PCI-IDE: bus master base 0xe400
PCI-IDE: init channel done
IDE: scan_device_worker: bus 0x81192198, device-number 0
IDE: create_device: bus 0x81192198, device-number 0
IDE: setup_device_links: bus 0x81192198, device 0x8197be80
IDE: scan_device_int: device 0x8197be80, atapi 0
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197be80, atapi 1
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197be80
IDE: cleanup_device_links: device 0x8197be80
IDE: scan_device_worker: bus 0x81192198, device-number 1
IDE: create_device: bus 0x81192198, device-number 1
IDE: setup_device_links: bus 0x81192198, device 0x8197be80
IDE: scan_device_int: device 0x8197be80, atapi 0
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197be80, atapi 1
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197be80
IDE: cleanup_device_links: device 0x8197be80
IDE: scan_device_worker: bus 0x81192198, device-number 0
IDE: create_device: bus 0x81192198, device-number 0
IDE: setup_device_links: bus 0x81192198, device 0x8197be80
IDE: scan_device_int: device 0x8197be80, atapi 0
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197be80, atapi 1
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197be80
IDE: cleanup_device_links: device 0x8197be80
IDE: scan_device_worker: bus 0x81192198, device-number 1
IDE: create_device: bus 0x81192198, device-number 1
IDE: setup_device_links: bus 0x81192198, device 0x8197be80
IDE: scan_device_int: device 0x8197be80, atapi 0
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197be80, atapi 1
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192198
ide: reset_bus() device 0x8197be80, bus 0x81192198 success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197be80
IDE: cleanup_device_links: device 0x8197be80
PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
PCI-IDE: init channel...
PCI-IDE: channel index 1
PCI-IDE: bus master base 0xe408
PCI-IDE: init channel done
IDE: scan_device_worker: bus 0x81192264, device-number 0
IDE: create_device: bus 0x81192264, device-number 0
IDE: setup_device_links: bus 0x81192264, device 0x8197be80
IDE: scan_device_int: device 0x8197be80, atapi 0
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192264
ide: reset_bus() device 0x8197be80, bus 0x81192264 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192264
ide: reset_bus() device 0x8197be80, bus 0x81192264 success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197be80, atapi 1
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192264
ide: reset_bus() device 0x8197be80, bus 0x81192264 success
ide: reset_device() device 0x8197be80
ide: reset_device() device 0x8197be80 failed, calling reset_bus
ide: reset_bus() device 0x8197be80, bus 0x81192264
ide: reset_bus() device 0x8197be80, bus 0x81192264 success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197be80
IDE: cleanup_device_links: device 0x8197be80
IDE: scan_device_worker: bus 0x81192264, device-number 1
IDE: create_device: bus 0x81192264, device-number 1
IDE: setup_device_links: bus 0x81192264, device 0x8197be80
IDE: scan_device_int: device 0x8197be80, atapi 0
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197be80, atapi 1
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: enabling DMA
IDE: scan_device_worker: bus 0x81192264, device-number 0
IDE: create_device: bus 0x81192264, device-number 0
IDE: setup_device_links: bus 0x81192264, device 0x8197c260
IDE: scan_device_int: device 0x8197c260, atapi 0
ide: reset_device() device 0x8197c260
ide: reset_device() device 0x8197c260 failed, calling reset_bus
ide: reset_bus() device 0x8197c260, bus 0x81192264
ide: reset_bus() device 0x8197c260, bus 0x81192264 success
ide: reset_device() device 0x8197c260
ide: reset_device() device 0x8197c260 failed, calling reset_bus
ide: reset_bus() device 0x8197c260, bus 0x81192264
ide: reset_bus() device 0x8197c260, bus 0x81192264 success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197c260, atapi 1
ide: reset_device() device 0x8197c260
ide: reset_device() device 0x8197c260 failed, calling reset_bus
ide: reset_bus() device 0x8197c260, bus 0x81192264
ide: reset_bus() device 0x8197c260, bus 0x81192264 success
ide: reset_device() device 0x8197c260
ide: reset_device() device 0x8197c260 failed, calling reset_bus
ide: reset_bus() device 0x8197c260, bus 0x81192264
ide: reset_bus() device 0x8197c260, bus 0x81192264 success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197c260
IDE: cleanup_device_links: device 0x8197c260
IDE: scan_device_worker: bus 0x81192264, device-number 1
IDE: destroy_device: device 0x8197be80
IDE: cleanup_device_links: device 0x8197be80
IDE: create_device: bus 0x81192264, device-number 1
IDE: setup_device_links: bus 0x81192264, device 0x8197be80
IDE: scan_device_int: device 0x8197be80, atapi 0
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197be80, atapi 1
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: enabling DMA
publish device: node 0x81193870, path disk/atapi/1/slave/raw, module drivers/disk/scsi/scsi_cd/device_v1
Legacy SATA: controller found! vendor 0x1106, device 0x3149
Legacy SATA: controller_probe
PCI-IDE: Controller in native mode: cmd 0xfc00, ctrl 0xf802, irq 11
PCI-IDE: init channel...
PCI-IDE: channel index 0
PCI-IDE: bus master base 0xec00
PCI-IDE: init channel done
IDE: scan_device_worker: bus 0x81192330, device-number 0
IDE: create_device: bus 0x81192330, device-number 0
IDE: setup_device_links: bus 0x81192330, device 0x8197c260
IDE: scan_device_int: device 0x8197c260, atapi 0
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: enabling DMA
IDE: scan_device_worker: bus 0x81192330, device-number 1
IDE: create_device: bus 0x81192330, device-number 1
IDE: setup_device_links: bus 0x81192330, device 0x8197c640
IDE: scan_device_int: device 0x8197c640, atapi 0
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x81192330
ide: reset_bus() device 0x8197c640, bus 0x81192330 success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x81192330
ide: reset_bus() device 0x8197c640, bus 0x81192330 success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197c640, atapi 1
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x81192330
ide: reset_bus() device 0x8197c640, bus 0x81192330 success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x81192330
ide: reset_bus() device 0x8197c640, bus 0x81192330 success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197c640
IDE: cleanup_device_links: device 0x8197c640
IDE: scan_device_worker: bus 0x81192330, device-number 0
IDE: destroy_device: device 0x8197c260
IDE: cleanup_device_links: device 0x8197c260
IDE: create_device: bus 0x81192330, device-number 0
IDE: setup_device_links: bus 0x81192330, device 0x8197c260
IDE: scan_device_int: device 0x8197c260, atapi 0
IDE: scan_device_int: waiting 100ms...
IDE: scan_device_int: got a fast response
IDE: scan_device_int: device found
IDE: enabling DMA
IDE: scan_device_worker: bus 0x81192330, device-number 1
IDE: create_device: bus 0x81192330, device-number 1
IDE: setup_device_links: bus 0x81192330, device 0x8197c640
IDE: scan_device_int: device 0x8197c640, atapi 0
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x81192330
ide: reset_bus() device 0x8197c640, bus 0x81192330 success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x81192330
ide: reset_bus() device 0x8197c640, bus 0x81192330 success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197c640, atapi 1
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x81192330
ide: reset_bus() device 0x8197c640, bus 0x81192330 success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x81192330
ide: reset_bus() device 0x8197c640, bus 0x81192330 success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197c640
IDE: cleanup_device_links: device 0x8197c640
publish device: node 0x81193b90, path disk/ata/2/master/raw, module drivers/disk/scsi/scsi_disk/device_v1
Primary Channel: No error
PCI-IDE: Controller in native mode: cmd 0xf400, ctrl 0xf002, irq 11
PCI-IDE: init channel...
PCI-IDE: channel index 1
PCI-IDE: bus master base 0xec08
PCI-IDE: init channel done
IDE: scan_device_worker: bus 0x811923fc, device-number 0
IDE: create_device: bus 0x811923fc, device-number 0
IDE: setup_device_links: bus 0x811923fc, device 0x8197c640
IDE: scan_device_int: device 0x8197c640, atapi 0
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197c640, atapi 1
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197c640
IDE: cleanup_device_links: device 0x8197c640
IDE: scan_device_worker: bus 0x811923fc, device-number 1
IDE: create_device: bus 0x811923fc, device-number 1
IDE: setup_device_links: bus 0x811923fc, device 0x8197c640
IDE: scan_device_int: device 0x8197c640, atapi 0
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197c640, atapi 1
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197c640
IDE: cleanup_device_links: device 0x8197c640
IDE: scan_device_worker: bus 0x811923fc, device-number 0
IDE: create_device: bus 0x811923fc, device-number 0
IDE: setup_device_links: bus 0x811923fc, device 0x8197c640
IDE: scan_device_int: device 0x8197c640, atapi 0
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197c640, atapi 1
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197c640
IDE: cleanup_device_links: device 0x8197c640
IDE: scan_device_worker: bus 0x811923fc, device-number 1
IDE: create_device: bus 0x811923fc, device-number 1
IDE: setup_device_links: bus 0x811923fc, device 0x8197c640
IDE: scan_device_int: device 0x8197c640, atapi 0
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
IDE: scan_device_int: send_command failed
IDE: scan_device_int: device 0x8197c640, atapi 1
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
ide: reset_device() device 0x8197c640
ide: reset_device() device 0x8197c640 failed, calling reset_bus
ide: reset_bus() device 0x8197c640, bus 0x811923fc
ide: reset_bus() device 0x8197c640, bus 0x811923fc success
IDE: scan_device_int: send_command failed
IDE: destroy_device: device 0x8197c640
IDE: cleanup_device_links: device 0x8197c640
Secondary Channel: No error
Legacy SATA: controller_probe success
[35mahci:[0m ahci_supports_device
[35mahci:[0m ahci_supports_device
KDiskDeviceManager::_Scan(/dev/disk/ata)
KDiskDeviceManager::_Scan(/dev/disk/ata/2)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master/raw)
  found device: /dev/disk/ata/2/master/raw
DMAResource@0x81196960: low/high 0/ffffffff, max segment count 512, align 2, boundary 65536, max transfer 130560, max segment size 33554432
heap_add_area: area 270 added to medium heap 0x81960000 - usable range 0x83001000 - 0x83400000
dma buffer restrictions not yet implemented: boundary 65536
Last message repeated 31 times.
KDiskDeviceManager::_Scan(/dev/disk/atapi)
KDiskDeviceManager::_Scan(/dev/disk/atapi/1)
KDiskDeviceManager::_Scan(/dev/disk/atapi/1/slave)
KDiskDeviceManager::_Scan(/dev/disk/atapi/1/slave/raw)
  found device: /dev/disk/atapi/1/slave/raw
KDiskDeviceManager::_ScanPartition(/dev/disk/ata/2/master/raw)
intel: ep_std_ops(0x1)
  trying: partitioning_systems/intel/extended/v1
  returned: -1
intel: ep_std_ops(0x2)
intel: pm_std_ops(0x1)
  trying: partitioning_systems/intel/map/v1
intel: pm_identify_partition(0, 0: 0, 120034123776, 512)
  returned: 0.81
  trying: file_systems/bfs/v1
  returned: -1
  trying: file_systems/devfs/v1
  returned: -1
  trying: file_systems/rootfs/v1
  returned: -1
  scanning with: partitioning_systems/intel/map/v1
intel: pm_scan_partition(0, 0: 0, 120034123776, 512)
KDiskDeviceManager::_ScanPartition(/dev/disk/ata/2/master/0)
intel: ep_std_ops(0x1)
  trying: partitioning_systems/intel/extended/v1
intel: ep_identify_partition(0, 32256, 120023253504, 512)
  returned: -1
intel: ep_std_ops(0x2)
  trying: partitioning_systems/intel/map/v1
intel: pm_identify_partition(0, 2: 32256, 120023253504, 512)
  returned: -1
  trying: file_systems/bfs/v1
  returned: 0.8
  trying: file_systems/devfs/v1
  returned: -1
  trying: file_systems/rootfs/v1
  returned: -1
  scanning with: file_systems/bfs/v1
device 0: /dev/disk/ata/2/master/raw
  media status:      No error
  device flags:      2
  offset:            0
  size:              120034123776 (114473.46 MB)
  content size:      120034123776
  block size:        512
  child count:       1
  index:             -1
  status:            0
  flags:             5
  volume:            -1
  disk system:       partitioning_systems/intel/map/v1
  name:              <NULL>
  content name:      <NULL>
  type:              <NULL>
  content type:      Intel Partition Map
  params:            <NULL>
  content params:    <NULL>
  partition 2: /dev/disk/ata/2/master/0
    offset:            32256
    size:              120023253504 (114463.94 MB)
    content size:      120023252992
    block size:        2048
    child count:       0
    index:             0
    status:            0
    flags:             2
    volume:            -1
    disk system:       file_systems/bfs/v1
    name:              <NULL>
    content name:      Haiku
    type:              BFS Filesystem
    content type:      Be File System
    params:            type = 235 ; active = 1
    content params:    <NULL>
device 1: /dev/disk/atapi/1/slave/raw
  media status:      No media present
  device flags:      5
bfs: mounted "Haiku" (root node at 524288, device = /dev/disk/ata/2/master/0)
module: Search for file_cache/launch_speedup/v1 failed.
partitioning system: partitioning_systems/session/v1
KDiskDeviceManager::_AddDiskSystem(partitioning_systems/session/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/cdda/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/cdda/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/ext2/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/ext2/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/fat/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/fat/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/iso9660/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/iso9660/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/nfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/nfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
file system: file_systems/reiserfs/v1
KDiskDeviceManager::_AddDiskSystem(file_systems/reiserfs/v1)
KDiskDeviceManager::_AddDiskSystem() done: No error
KDiskDeviceManager::_Scan(/dev/disk)
con_init: trying module console/frame_buffer/v1
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/console
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/dprintf
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/keyboard
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/null
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/random
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/tty
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/zero
oss:init_osscore: 0x00000000
oss: matching pci 1106,3059
install_io_interrupt_handler (5, 0x834373e0, 0x81192990, 0) = 0x00000000
oss_contig_malloc: area 446 @ va 0x80792000, pa 0x002c9000, sz 4096
oss_contig_malloc: area 447 @ va 0x80793000, pa 0x002ca000, sz 4096
loaded driver /boot/home/config/add-ons/kernel/drivers/dev/oss_loader
[35mahci:[0m ahci_supports_device
[35mahci:[0m ahci_supports_device
KDiskDeviceManager::_Scan(/dev/disk/ata)
KDiskDeviceManager::_Scan(/dev/disk/ata/2)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master/0)
KDiskDeviceManager::_Scan(/dev/disk/ata/2/master/raw)
KDiskDeviceManager::_Scan(/dev/disk/atapi)
KDiskDeviceManager::_Scan(/dev/disk/atapi/1)
KDiskDeviceManager::_Scan(/dev/disk/atapi/1/slave)
KDiskDeviceManager::_Scan(/dev/disk/atapi/1/slave/raw)
KDiskDeviceManager::_Scan(/dev/disk/floppy)
config_manager: driver module: init
driver_get_next_device_info(bus = 0, cookie = 0)
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/disk/floppy/pc_floppy
KDiskDeviceManager::_Scan(/dev/disk/usb)
KDiskDeviceManager::_Scan(/dev/disk/virtual)
nbd:>init_hardware()
nbd:>init_driver()
allocate_commpage_entry(4, 34) -> 0xffff0118
allocate_commpage_entry(5, 74) -> 0xffff0140
set_memory_write_back base 0 length 1c000000
find_nearest 1c000000 0
find_nearest c000000 1
find_nearest 4000000 2
find_nearest 4000000 2
find_nearest 4000000 1
solutions: 0xffffffffe0000000 0x4000000 
allocate MTRR slot 0, base = 0, length = 20000000, type=0x6
allocate MTRR slot 1, base = 1c000000, length = 4000000, type=0x0
kernel debugger extension "debugger/disasm/v1": loaded
kernel debugger extension "debugger/hangman/v1": loaded
kernel debugger extension "debugger/invalidate_on_exit/v1": loaded
allocate MTRR slot 2, base = f4000000, length = 800000, type=0x1
acpi: ACPI disabled
REG: Failed to open shadow passwd DB file "/etc/shadow": No such file or directory
bfs: bfs_open_dir:1515: Invalid Argument
register_domain(1, internet)
unregister_domain(0x811ec594, 1, internet)
register_domain(9, unix)
unregister_domain(0x811ec660, 9, unix)
register_domain(1, internet)
get_device_interface: ask "network/devices/ethernet/v1" for loop
get_device_interface: ask "network/devices/loopback/v1" for loop
3com: init_hardware(0x807f49d8)
3com: no hardware found.
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/bcm440x
loaded driver /boot/beos/system/add-ons/kernel/drivers/dev/net/bcm570x
etherpci: init_driver init_driver: etherpci not found
ipro100: init_hardware(0x807f1fa4)
ipro100: no hardware found.
ipro1000: init_hardware(0x809ac844)
ipro1000: no hardware found.
marvell_yukon: init_hardware(0x807f7cdc)
marvell_yukon: no hardware found.
nforce: init_hardware(0x807f4d78)
nforce: no hardware found.
rtl8139: init_hardware(0x807f0e8c)
rtl8139: no hardware found.
rtl81xx: init_hardware(0x807f284c)
rtl81xx: no hardware found.
syskonnect: init_hardware(0x807f7318)
syskonnect: no hardware found.
usb_module: init
USB Stack: stack init
USB Stack: looking for host controller modules
USB Stack: looking for module busses/usb/uhci
usb_uhci_module: init module
USB Stack: adding module busses/usb/uhci
usb_uhci: AddTo(): setting up hardware
usb_uhci: AddTo(): found at IRQ 10
usb_uhci: constructing new UHCI Host Controller Driver
usb_uhci: iospace offset: 0x0000e000
USB Stack: allocating 4096 bytes for USB UHCI framelist
USB Stack: area = 0x00000593, size = 4096, log = 0x80770000, phy = 0x00125000
usb_uhci: installing interrupt handler
usb_uhci: UHCI Host Controller Driver constructed
usb_uhci: starting UHCI BusManager
usb_uhci: usbcmd reg 0x0080, usbsts reg 0x0020
usb_uhci: current loop 0, status 0x0000
USB Device 1: creating device
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 1
full device descriptor for device 1:
    length:..............18
    descriptor_type:.....0x0001
    usb_version:.........0x0110
    device_class:........0x09
    device_subclass:.....0x00
    device_protocol:.....0x00
    max_packet_size_0:...64
    vendor_id:...........0x0000
    product_id:..........0x0000
    device_version:......0x0110
    manufacturer:........0x01
    product:.............0x02
    serial_number:.......0x00
    num_configurations:..1
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 2
USB Device 1: configuration 0
    length:..............9
    descriptor_type:.....0x02
    total_length:........34
    number_interfaces:...1
    configuration_value:.0x01
    configuration:.......0x00
    attributes:..........0x40
    max_power:...........0
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 2
USB Device 1: got interface descriptor
    length:.............9
    descriptor_type:....0x04
    interface_number:...0
    alternate_setting:..0
    num_endpoints:......1
    interface_class:....0x09
    interface_subclass:.0x00
    interface_protocol:.0x00
    interface:..........0
USB Device 1: got endpoint descriptor
    length:.............7
    descriptor_type:....0x05
    endpoint_address:...0x81
    attributes:.........0x03
    max_packet_size:....8
    interval:...........255
USB Device 1: got generic descriptor
    length:.............9
    descriptor_type:....0x29
USB Device 1: setting default configuration
usb_uhci_roothub: request: 9
USB Hub 1: creating hub
USB Hub 1: Getting hub descriptor...
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 41
USB Hub 1: hub descriptor (9 bytes):
    length:..............9
    descriptor_type:.....0x29
    num_ports:...........2
    characteristics:.....0x0000
    power_on_to_power_g:.0
    device_removeable:...0x00
    power_control_mask:..0xff
usb_uhci_roothub: request: 3
usb_uhci_roothub: set feature: 8!
usb_uhci_roothub: request: 3
usb_uhci_roothub: set feature: 8!
USB Hub 1: initialised ok
usb_uhci: controller is started. status: 0 curframe: 184
usb_uhci: successfully started the controller
usb_uhci: AddTo(): found at IRQ 10
usb_uhci: constructing new UHCI Host Controller Driver
usb_uhci: iospace offset: 0x0000dc00
USB Stack: allocating 4096 bytes for USB UHCI framelist
USB Stack: area = 0x00000596, size = 4096, log = 0x80775000, phy = 0x00126000
usb_uhci: installing interrupt handler
usb_uhci: UHCI Host Controller Driver constructed
usb_uhci: starting UHCI BusManager
usb_uhci: usbcmd reg 0x0080, usbsts reg 0x0020
usb_uhci: current loop 0, status 0x0000
USB Device 1: creating device
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 1
full device descriptor for device 1:
    length:..............18
    descriptor_type:.....0x0001
    usb_version:.........0x0110
    device_class:........0x09
    device_subclass:.....0x00
    device_protocol:.....0x00
    max_packet_size_0:...64
    vendor_id:...........0x0000
    product_id:..........0x0000
    device_version:......0x0110
    manufacturer:........0x01
    product:.............0x02
    serial_number:.......0x00
    num_configurations:..1
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 2
USB Device 1: configuration 0
    length:..............9
    descriptor_type:.....0x02
    total_length:........34
    number_interfaces:...1
    configuration_value:.0x01
    configuration:.......0x00
    attributes:..........0x40
    max_power:...........0
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 2
USB Device 1: got interface descriptor
    length:.............9
    descriptor_type:....0x04
    interface_number:...0
    alternate_setting:..0
    num_endpoints:......1
    interface_class:....0x09
    interface_subclass:.0x00
    interface_protocol:.0x00
    interface:..........0
USB Device 1: got endpoint descriptor
    length:.............7
    descriptor_type:....0x05
    endpoint_address:...0x81
    attributes:.........0x03
    max_packet_size:....8
    interval:...........255
USB Device 1: got generic descriptor
    length:.............9
    descriptor_type:....0x29
USB Device 1: setting default configuration
usb_uhci_roothub: request: 9
USB Hub 1: creating hub
USB Hub 1: Getting hub descriptor...
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 41
USB Hub 1: hub descriptor (9 bytes):
    length:..............9
    descriptor_type:.....0x29
    num_ports:...........2
    characteristics:.....0x0000
    power_on_to_power_g:.0
    device_removeable:...0x00
    power_control_mask:..0xff
usb_uhci_roothub: request: 3
usb_uhci_roothub: set feature: 8!
usb_uhci_roothub: request: 3
usb_uhci_roothub: set feature: 8!
USB Hub 1: initialised ok
usb_uhci: controller is started. status: 0 curframe: 181
usb_uhci: successfully started the controller
usb_uhci: AddTo(): found at IRQ 11
usb_uhci: constructing new UHCI Host Controller Driver
usb_uhci: iospace offset: 0x0000d800
USB Stack: allocating 4096 bytes for USB UHCI framelist
USB Stack: area = 0x0000059b, size = 4096, log = 0x807a9000, phy = 0x00127000
usb_uhci: installing interrupt handler
usb_uhci: UHCI Host Controller Driver constructed
usb_uhci: starting UHCI BusManager
usb_uhci: host controller halted
usb_uhci: usbcmd reg 0x0080, usbsts reg 0x0020
usb_uhci: current loop 0, status 0x0000
USB Device 1: creating device
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 1
full device descriptor for device 1:
    length:..............18
    descriptor_type:.....0x0001
    usb_version:.........0x0110
    device_class:........0x09
    device_subclass:.....0x00
    device_protocol:.....0x00
    max_packet_size_0:...64
    vendor_id:...........0x0000
    product_id:..........0x0000
    device_version:......0x0110
    manufacturer:........0x01
    product:.............0x02
    serial_number:.......0x00
    num_configurations:..1
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 2
USB Device 1: configuration 0
    length:..............9
    descriptor_type:.....0x02
    total_length:........34
    number_interfaces:...1
    configuration_value:.0x01
    configuration:.......0x00
    attributes:..........0x40
    max_power:...........0
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 2
USB Device 1: got interface descriptor
    length:.............9
    descriptor_type:....0x04
    interface_number:...0
    alternate_setting:..0
    num_endpoints:......1
    interface_class:....0x09
    interface_subclass:.0x00
    interface_protocol:.0x00
    interface:..........0
USB Device 1: got endpoint descriptor
    length:.............7
    descriptor_type:....0x05
    endpoint_address:...0x81
    attributes:.........0x03
    max_packet_size:....8
    interval:...........255
USB Device 1: got generic descriptor
    length:.............9
    descriptor_type:....0x29
USB Device 1: setting default configuration
usb_uhci_roothub: request: 9
USB Hub 1: creating hub
USB Hub 1: Getting hub descriptor...
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 41
USB Hub 1: hub descriptor (9 bytes):
    length:..............9
    descriptor_type:.....0x29
    num_ports:...........2
    characteristics:.....0x0000
    power_on_to_power_g:.0
    device_removeable:...0x00
    power_control_mask:..0xff
usb_uhci_roothub: request: 3
usb_uhci_roothub: set feature: 8!
usb_uhci_roothub: request: 3
usb_uhci_roothub: set feature: 8!
USB Hub 1: initialised ok
usb_uhci: controller is started. status: 0 curframe: 181
usb_uhci: successfully started the controller
usb_uhci: AddTo(): found at IRQ 11
usb_uhci: constructing new UHCI Host Controller Driver
usb_uhci: iospace offset: 0x0000d400
USB Stack: allocating 4096 bytes for USB UHCI framelist
USB Stack: area = 0x0000059e, size = 4096, log = 0x807aa000, phy = 0x00128000
usb_uhci: installing interrupt handler
usb_uhci: UHCI Host Controller Driver constructed
usb_uhci: starting UHCI BusManager
usb_uhci: usbcmd reg 0x0080, usbsts reg 0x0020
usb_uhci: current loop 0, status 0x0000
USB Device 1: creating device
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 1
full device descriptor for device 1:
    length:..............18
    descriptor_type:.....0x0001
    usb_version:.........0x0110
    device_class:........0x09
    device_subclass:.....0x00
    device_protocol:.....0x00
    max_packet_size_0:...64
    vendor_id:...........0x0000
    product_id:..........0x0000
    device_version:......0x0110
    manufacturer:........0x01
    product:.............0x02
    serial_number:.......0x00
    num_configurations:..1
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 2
USB Device 1: configuration 0
    length:..............9
    descriptor_type:.....0x02
    total_length:........34
    number_interfaces:...1
    configuration_value:.0x01
    configuration:.......0x00
    attributes:..........0x40
    max_power:...........0
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 2
USB Device 1: got interface descriptor
    length:.............9
    descriptor_type:....0x04
    interface_number:...0
    alternate_setting:..0
    num_endpoints:......1
    interface_class:....0x09
    interface_subclass:.0x00
    interface_protocol:.0x00
    interface:..........0
USB Device 1: got endpoint descriptor
    length:.............7
    descriptor_type:....0x05
    endpoint_address:...0x81
    attributes:.........0x03
    max_packet_size:....8
    interval:...........255
USB Device 1: got generic descriptor
    length:.............9
    descriptor_type:....0x29
USB Device 1: setting default configuration
usb_uhci_roothub: request: 9
USB Hub 1: creating hub
USB Hub 1: Getting hub descriptor...
usb_uhci_roothub: request: 6
usb_uhci_roothub: get descriptor: 41
USB Hub 1: hub descriptor (9 bytes):
    length:..............9
    descriptor_type:.....0x29
    num_ports:...........2
    characteristics:.....0x0000
    power_on_to_power_g:.0
    device_removeable:...0x00
    power_control_mask:..0xff
usb_uhci_roothub: request: 3
usb_uhci_roothub: set feature: 8!
usb_uhci_roothub: request: 3
usb_uhci_roothub: set feature: 8!
USB Hub 1: initialised ok
usb_uhci: controller is started. status: 0 curframe: 215
usb_uhci: successfully started the controller
USB Stack: module busses/usb/uhci successfully loaded
USB Stack: looking for module busses/usb/ohci
usb_ohci_module: init module
USB Stack: adding module busses/usb/ohci
usb_ohci: searching devices
usb_ohci: no devices found
usb_ohci_module: uninit module
USB Stack: looking for module busses/usb/ehci
usb_ehci_module: init module
USB Stack: adding module busses/usb/ehci
usb_ehci: searching devices
usb_ehci: found device at IRQ 5
usb_ehci: constructing new EHCI Host Controller Driver
usb_ehci: map physical memory 0xfdfff000 (base: 0xfdfff000; offset: 0); size: 256
usb_ehci: mapped capability registers: 0x807b2000
usb_ehci: mapped operational registers: 0x807b2010
usb_ehci: structural parameters: 0x00004208
usb_ehci: capability parameters: 0x00006872
usb_ehci: extended capabilities register at 104
usb_ehci: claiming ownership of the host controller
usb_ehci: successfully took ownership of the host controller
USB Stack: allocating 8192 bytes for USB EHCI Periodic Framelist
USB Stack: area = 0x000005a8, size = 8192, log = 0x807b3000, phy = 0x00129000
usb_ehci: creating interrupt entries
usb_ehci: build up interrupt links
usb_ehci: set the async list addr to 0x02da1180
usb_ehci: EHCI Host Controller Driver constructed
usb_ehci: starting EHCI Host Controller
usb_ehci: usbcmd: 0x00080000; usbsts: 0x00001000
usb_ehci: try 0: status 0x0000e000
USB Device 1: creating device
usb_ehci: pipe change 0 for pipe 0x81200370
usb_ehci_roothub: request: 6
usb_ehci_roothub: get descriptor: 1
full device descriptor for device 1:
    length:..............18
    descriptor_type:.....0x0001
    usb_version:.........0x0200
    device_class:........0x09
    device_subclass:.....0x00
    device_protocol:.....0x00
    max_packet_size_0:...64
    vendor_id:...........0x0000
    product_id:..........0x0000
    device_version:......0x0200
    manufacturer:........0x01
    product:.............0x02
    serial_number:.......0x00
    num_configurations:..1
usb_ehci_roothub: request: 6
usb_ehci_roothub: get descriptor: 2
USB Device 1: configuration 0
    length:..............9
    descriptor_type:.....0x02
    total_length:........34
    number_interfaces:...1
    configuration_value:.0x01
    configuration:.......0x00
    attributes:..........0x40
    max_power:...........0
usb_ehci_roothub: request: 6
usb_ehci_roothub: get descriptor: 2
USB Device 1: got interface descriptor
    length:.............9
    descriptor_type:....0x04
    interface_number:...0
    alternate_setting:..0
    num_endpoints:......1
    interface_class:....0x09
    interface_subclass:.0x00
    interface_protocol:.0x00
    interface:..........0
USB Device 1: got endpoint descriptor
    length:.............7
    descriptor_type:....0x05
    endpoint_address:...0x81
    attributes:.........0x03
    max_packet_size:....8
    interval:...........255
USB Device 1: got generic descriptor
    length:.............9
    descriptor_type:....0x29
USB Device 1: setting default configuration
usb_ehci_roothub: request: 9
usb_ehci: pipe change 0 for pipe 0x811876b4
USB Hub 1: creating hub
USB Hub 1: Getting hub descriptor...
usb_ehci_roothub: request: 6
usb_ehci_roothub: get descriptor: 41
USB Hub 1: hub descriptor (9 bytes):
    length:..............9
    descriptor_type:.....0x29
    num_ports:...........8
    characteristics:.....0x0000
    power_on_to_power_g:.0
    device_removeable:...0x00
    power_control_mask:..0xff
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 8
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 8
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 8
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 8
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 8
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 8
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 8
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 8
USB Hub 1: initialised ok
usb_ehci: successfully started the controller
USB Stack: module busses/usb/ehci successfully loaded
usb_uhci_roothub: request: 0
USB Hub 1: port 0: status: 0x0100; change: 0x0003
USB Hub 1: device at port 0: 0x00000000
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 16
USB Hub 1: device removed
USB Hub 1: port 0 disabled
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 17
usb_uhci_roothub: request: 0
USB Hub 1: port 1: status: 0x0100; change: 0x0003
USB Hub 1: device at port 1: 0x00000000
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 16
USB Hub 1: device removed
USB Hub 1: port 1 disabled
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 17
usb_uhci_roothub: request: 0
USB Hub 1: port 0: status: 0x0300; change: 0x0003
USB Hub 1: device at port 0: 0x00000000
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 16
USB Hub 1: device removed
USB Hub 1: port 0 disabled
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 17
usb_uhci_roothub: request: 0
USB Hub 1: port 1: status: 0x0100; change: 0x0003
USB Hub 1: device at port 1: 0x00000000
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 16
USB Hub 1: device removed
USB Hub 1: port 1 disabled
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 17
usb_uhci_roothub: request: 0
USB Hub 1: port 0: status: 0x0100; change: 0x0003
USB Hub 1: device at port 0: 0x00000000
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 16
USB Hub 1: device removed
USB Hub 1: port 0 disabled
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 17
usb_uhci_roothub: request: 0
USB Hub 1: port 1: status: 0x0100; change: 0x0003
USB Hub 1: device at port 1: 0x00000000
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 16
USB Hub 1: device removed
USB Hub 1: port 1 disabled
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 17
usb_uhci_roothub: request: 0
USB Hub 1: port 0: status: 0x0100; change: 0x0003
USB Hub 1: device at port 0: 0x00000000
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 16
USB Hub 1: device removed
USB Hub 1: port 0 disabled
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 17
usb_uhci_roothub: request: 0
USB Hub 1: port 1: status: 0x0300; change: 0x0003
USB Hub 1: device at port 1: 0x00000000
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 16
USB Hub 1: device removed
USB Hub 1: port 1 disabled
usb_uhci_roothub: request: 1
usb_uhci_roothub: clear feature: 17
usb_ehci_roothub: request: 0
Last message repeated 5 times.
USB Hub 1: port 5: status: 0x0101; change: 0x0001
USB Hub 1: device at port 5: 0x00000000
usb_ehci_roothub: request: 1
usb_ehci_roothub: clear feature: 16
USB Hub 1: new device connected
usb_ehci_roothub: request: 3
usb_ehci_roothub: set feature: 4
usb_ehci: reset port 5
usb_ehci_roothub: request: 0
usb_ehci_roothub: request: 1
usb_ehci_roothub: clear feature: 20
USB Hub 1: port 5 was reset successfully
usb_ehci_roothub: request: 0
USB BusManager: setting device address to 2
usb_ehci: pipe change 0 for pipe 0x81200410
usb_ehci: wrote descriptor chain (8 bytes, no more vectors)
usb_ehci: linking queue
queue:    t02da1280 n00000001 ch30086000 ca40000000 cu00000001
overlay:  n02da1380 a00000001 t00000000 00000000 00000000 00000000 00000000 00000000
 02da1380 n02da1480 a02da1300 t00080e80 02da1400 02da2000 02da3000 02da4000 02da5000 s8
 02da1480 n00000001 a00000001 t80008d80 00000000 00000000 00000000 00000000 00000000 s0