1 | 00:00.0 Host bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
|
---|
2 | Subsystem: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx0 port B)
|
---|
3 | Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
4 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
|
---|
5 | Capabilities: <access denied>
|
---|
6 |
|
---|
7 | 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) (prog-if 00 [Normal decode])
|
---|
8 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
9 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
10 | Latency: 0, Cache Line Size: 64 bytes
|
---|
11 | Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
|
---|
12 | I/O behind bridge: 0000e000-0000efff
|
---|
13 | Memory behind bridge: fea00000-feafffff
|
---|
14 | Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
|
---|
15 | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
|
---|
16 | BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
|
---|
17 | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
|
---|
18 | Capabilities: <access denied>
|
---|
19 | Kernel driver in use: pcieport
|
---|
20 |
|
---|
21 | 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
|
---|
22 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
23 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
24 | Latency: 0, Cache Line Size: 64 bytes
|
---|
25 | Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
|
---|
26 | I/O behind bridge: 0000d000-0000dfff
|
---|
27 | Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
|
---|
28 | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
|
---|
29 | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
|
---|
30 | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
|
---|
31 | Capabilities: <access denied>
|
---|
32 | Kernel driver in use: pcieport
|
---|
33 |
|
---|
34 | 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) (prog-if 00 [Normal decode])
|
---|
35 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
36 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
37 | Latency: 0, Cache Line Size: 64 bytes
|
---|
38 | Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
|
---|
39 | Memory behind bridge: fe900000-fe9fffff
|
---|
40 | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
|
---|
41 | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
|
---|
42 | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
|
---|
43 | Capabilities: <access denied>
|
---|
44 | Kernel driver in use: pcieport
|
---|
45 |
|
---|
46 | 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) (prog-if 00 [Normal decode])
|
---|
47 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
48 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
49 | Latency: 0, Cache Line Size: 64 bytes
|
---|
50 | Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
|
---|
51 | I/O behind bridge: 0000c000-0000cfff
|
---|
52 | Memory behind bridge: fe800000-fe8fffff
|
---|
53 | Prefetchable memory behind bridge: 00000000d0100000-00000000d01fffff
|
---|
54 | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
|
---|
55 | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
|
---|
56 | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
|
---|
57 | Capabilities: <access denied>
|
---|
58 | Kernel driver in use: pcieport
|
---|
59 |
|
---|
60 | 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) (prog-if 00 [Normal decode])
|
---|
61 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
62 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
63 | Latency: 0, Cache Line Size: 64 bytes
|
---|
64 | Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
|
---|
65 | Memory behind bridge: fe700000-fe7fffff
|
---|
66 | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
|
---|
67 | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
|
---|
68 | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
|
---|
69 | Capabilities: <access denied>
|
---|
70 | Kernel driver in use: pcieport
|
---|
71 |
|
---|
72 | 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) (prog-if 00 [Normal decode])
|
---|
73 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
74 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
75 | Latency: 0, Cache Line Size: 64 bytes
|
---|
76 | Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
|
---|
77 | I/O behind bridge: 0000b000-0000bfff
|
---|
78 | Memory behind bridge: fe600000-fe6fffff
|
---|
79 | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
|
---|
80 | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
|
---|
81 | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
|
---|
82 | Capabilities: <access denied>
|
---|
83 | Kernel driver in use: pcieport
|
---|
84 |
|
---|
85 | 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
|
---|
86 | Subsystem: ASUSTeK Computer Inc. Device 84dd
|
---|
87 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
88 | Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
89 | Latency: 32
|
---|
90 | Interrupt: pin A routed to IRQ 19
|
---|
91 | Region 0: I/O ports at f040 [size=8]
|
---|
92 | Region 1: I/O ports at f030 [size=4]
|
---|
93 | Region 2: I/O ports at f020 [size=8]
|
---|
94 | Region 3: I/O ports at f010 [size=4]
|
---|
95 | Region 4: I/O ports at f000 [size=16]
|
---|
96 | Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
|
---|
97 | Capabilities: <access denied>
|
---|
98 | Kernel driver in use: ahci
|
---|
99 |
|
---|
100 | 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
|
---|
101 | Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
|
---|
102 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
103 | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
104 | Latency: 32, Cache Line Size: 64 bytes
|
---|
105 | Interrupt: pin A routed to IRQ 18
|
---|
106 | Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
|
---|
107 | Kernel driver in use: ohci_hcd
|
---|
108 |
|
---|
109 | 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
|
---|
110 | Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller
|
---|
111 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
112 | Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
113 | Latency: 32, Cache Line Size: 64 bytes
|
---|
114 | Interrupt: pin B routed to IRQ 17
|
---|
115 | Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
|
---|
116 | Capabilities: <access denied>
|
---|
117 | Kernel driver in use: ehci_hcd
|
---|
118 |
|
---|
119 | 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
|
---|
120 | Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
|
---|
121 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
122 | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
123 | Latency: 32, Cache Line Size: 64 bytes
|
---|
124 | Interrupt: pin A routed to IRQ 20
|
---|
125 | Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
|
---|
126 | Kernel driver in use: ohci_hcd
|
---|
127 |
|
---|
128 | 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
|
---|
129 | Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller
|
---|
130 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
131 | Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
132 | Latency: 32, Cache Line Size: 64 bytes
|
---|
133 | Interrupt: pin B routed to IRQ 21
|
---|
134 | Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
|
---|
135 | Capabilities: <access denied>
|
---|
136 | Kernel driver in use: ehci_hcd
|
---|
137 |
|
---|
138 | 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
|
---|
139 | Subsystem: ATI Technologies Inc SBx00 SMBus Controller
|
---|
140 | Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
141 | Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
142 | Kernel driver in use: piix4_smbus
|
---|
143 |
|
---|
144 | 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
|
---|
145 | Subsystem: ASUSTeK Computer Inc. Device 8410
|
---|
146 | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
147 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
148 | Latency: 32, Cache Line Size: 64 bytes
|
---|
149 | Interrupt: pin ? routed to IRQ 16
|
---|
150 | Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
|
---|
151 | Capabilities: <access denied>
|
---|
152 | Kernel driver in use: HDA Intel
|
---|
153 |
|
---|
154 | 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
|
---|
155 | Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller
|
---|
156 | Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
157 | Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
158 | Latency: 0
|
---|
159 |
|
---|
160 | 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
|
---|
161 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
162 | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
163 | Latency: 64
|
---|
164 | Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
|
---|
165 | I/O behind bridge: 0000a000-0000afff
|
---|
166 | Memory behind bridge: fe500000-fe5fffff
|
---|
167 | Prefetchable memory behind bridge: d0200000-d02fffff
|
---|
168 | Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
|
---|
169 | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
|
---|
170 | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
|
---|
171 |
|
---|
172 | 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
|
---|
173 | Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
|
---|
174 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
175 | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
176 | Latency: 32, Cache Line Size: 64 bytes
|
---|
177 | Interrupt: pin C routed to IRQ 18
|
---|
178 | Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
|
---|
179 | Kernel driver in use: ohci_hcd
|
---|
180 |
|
---|
181 | 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
|
---|
182 | Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
|
---|
183 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
184 | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
185 | Latency: 32, Cache Line Size: 64 bytes
|
---|
186 | Interrupt: pin A routed to IRQ 22
|
---|
187 | Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
|
---|
188 | Kernel driver in use: ohci_hcd
|
---|
189 |
|
---|
190 | 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
|
---|
191 | Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller
|
---|
192 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
193 | Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
194 | Latency: 32, Cache Line Size: 64 bytes
|
---|
195 | Interrupt: pin B routed to IRQ 23
|
---|
196 | Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
|
---|
197 | Capabilities: <access denied>
|
---|
198 | Kernel driver in use: ehci_hcd
|
---|
199 |
|
---|
200 | 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
|
---|
201 | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
202 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
203 | Capabilities: <access denied>
|
---|
204 |
|
---|
205 | 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
|
---|
206 | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
207 | Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
208 |
|
---|
209 | 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
|
---|
210 | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
211 | Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
212 |
|
---|
213 | 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
|
---|
214 | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
215 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
216 | Capabilities: <access denied>
|
---|
217 | Kernel driver in use: k10temp
|
---|
218 |
|
---|
219 | 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
|
---|
220 | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
221 | Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
222 |
|
---|
223 | 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 5800 Series (Cypress LE) (prog-if 00 [VGA controller])
|
---|
224 | Subsystem: XFX Pine Group Inc. Device 3070
|
---|
225 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
226 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
227 | Latency: 0, Cache Line Size: 64 bytes
|
---|
228 | Interrupt: pin A routed to IRQ 63
|
---|
229 | Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
|
---|
230 | Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K]
|
---|
231 | Region 4: I/O ports at e000 [size=256]
|
---|
232 | Expansion ROM at fea00000 [disabled] [size=128K]
|
---|
233 | Capabilities: <access denied>
|
---|
234 | Kernel driver in use: fglrx_pci
|
---|
235 |
|
---|
236 | 01:00.1 Audio device: ATI Technologies Inc Cypress HDMI Audio [Radeon HD 5800 Series]
|
---|
237 | Subsystem: XFX Pine Group Inc. Device aa50
|
---|
238 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
239 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
240 | Latency: 0, Cache Line Size: 64 bytes
|
---|
241 | Interrupt: pin B routed to IRQ 25
|
---|
242 | Region 0: Memory at fea40000 (64-bit, non-prefetchable) [size=16K]
|
---|
243 | Capabilities: <access denied>
|
---|
244 | Kernel driver in use: HDA Intel
|
---|
245 |
|
---|
246 | 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
|
---|
247 | Subsystem: ASUSTeK Computer Inc. Device 8432
|
---|
248 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
|
---|
249 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
250 | Latency: 0, Cache Line Size: 64 bytes
|
---|
251 | Interrupt: pin A routed to IRQ 62
|
---|
252 | Region 0: I/O ports at d000 [size=256]
|
---|
253 | Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
|
---|
254 | Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
|
---|
255 | Capabilities: <access denied>
|
---|
256 | Kernel driver in use: r8169
|
---|
257 |
|
---|
258 | 03:00.0 USB Controller: Device 1b21:1042 (prog-if 30)
|
---|
259 | Subsystem: ASUSTeK Computer Inc. Device 8488
|
---|
260 | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
261 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
262 | Latency: 0, Cache Line Size: 64 bytes
|
---|
263 | Interrupt: pin A routed to IRQ 46
|
---|
264 | Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
|
---|
265 | Capabilities: <access denied>
|
---|
266 | Kernel driver in use: xhci_hcd
|
---|
267 |
|
---|
268 | 04:00.0 SATA controller: JMicron Technology Corp. JMB362 AHCI Controller (rev 10) (prog-if 01 [AHCI 1.0])
|
---|
269 | Subsystem: ASUSTeK Computer Inc. Device 8460
|
---|
270 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
271 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
272 | Latency: 0, Cache Line Size: 64 bytes
|
---|
273 | Interrupt: pin A routed to IRQ 51
|
---|
274 | Region 0: I/O ports at c040 [size=8]
|
---|
275 | Region 1: I/O ports at c030 [size=4]
|
---|
276 | Region 2: I/O ports at c020 [size=8]
|
---|
277 | Region 3: I/O ports at c010 [size=4]
|
---|
278 | Region 4: I/O ports at c000 [size=16]
|
---|
279 | Region 5: Memory at fe810000 (32-bit, non-prefetchable) [size=512]
|
---|
280 | [virtual] Expansion ROM at d0100000 [disabled] [size=64K]
|
---|
281 | Capabilities: <access denied>
|
---|
282 | Kernel driver in use: ahci
|
---|
283 |
|
---|
284 | 05:00.0 USB Controller: Device 1b21:1042 (prog-if 30)
|
---|
285 | Subsystem: ASUSTeK Computer Inc. Device 8488
|
---|
286 | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
287 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
288 | Latency: 0, Cache Line Size: 64 bytes
|
---|
289 | Interrupt: pin A routed to IRQ 50
|
---|
290 | Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=32K]
|
---|
291 | Capabilities: <access denied>
|
---|
292 | Kernel driver in use: xhci_hcd
|
---|
293 |
|
---|
294 | 06:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
|
---|
295 | Subsystem: Silicon Image, Inc. Device 7132
|
---|
296 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
297 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
298 | Latency: 0, Cache Line Size: 64 bytes
|
---|
299 | Interrupt: pin A routed to IRQ 48
|
---|
300 | Region 0: Memory at fe684000 (64-bit, non-prefetchable) [size=128]
|
---|
301 | Region 2: Memory at fe680000 (64-bit, non-prefetchable) [size=16K]
|
---|
302 | Region 4: I/O ports at b000 [size=128]
|
---|
303 | Expansion ROM at fe600000 [disabled] [size=512K]
|
---|
304 | Capabilities: <access denied>
|
---|
305 | Kernel driver in use: sata_sil24
|
---|
306 |
|
---|
307 | 07:05.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
|
---|
308 | Subsystem: Adaptec AHA-3960D U160/m
|
---|
309 | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
310 | Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
311 | Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
|
---|
312 | Interrupt: pin A routed to IRQ 20
|
---|
313 | BIST result: 00
|
---|
314 | Region 0: I/O ports at a100 [disabled] [size=256]
|
---|
315 | Region 1: Memory at fe542000 (64-bit, non-prefetchable) [size=4K]
|
---|
316 | Expansion ROM at d0200000 [disabled] [size=128K]
|
---|
317 | Capabilities: <access denied>
|
---|
318 | Kernel driver in use: aic7xxx
|
---|
319 |
|
---|
320 | 07:05.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
|
---|
321 | Subsystem: Adaptec AHA-3960D U160/m
|
---|
322 | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
323 | Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
324 | Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
|
---|
325 | Interrupt: pin B routed to IRQ 21
|
---|
326 | BIST result: 00
|
---|
327 | Region 0: I/O ports at a000 [disabled] [size=256]
|
---|
328 | Region 1: Memory at fe541000 (64-bit, non-prefetchable) [size=4K]
|
---|
329 | Expansion ROM at d0220000 [disabled] [size=128K]
|
---|
330 | Capabilities: <access denied>
|
---|
331 | Kernel driver in use: aic7xxx
|
---|
332 |
|
---|
333 | 07:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
|
---|
334 | Subsystem: ASUSTeK Computer Inc. M4A series motherboard
|
---|
335 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
|
---|
336 | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
|
---|
337 | Latency: 32 (8000ns max), Cache Line Size: 64 bytes
|
---|
338 | Interrupt: pin A routed to IRQ 22
|
---|
339 | Region 0: Memory at fe540000 (32-bit, non-prefetchable) [size=2K]
|
---|
340 | Region 1: I/O ports at a200 [size=128]
|
---|
341 | Capabilities: <access denied>
|
---|
342 | Kernel driver in use: firewire_ohci
|
---|
343 |
|
---|