| 1 | # Settings file for the nvidia driver and accelerant
|
|---|
| 2 | #
|
|---|
| 3 | # This file should be moved to the directory
|
|---|
| 4 | # ~/config/settings/kernel/drivers/
|
|---|
| 5 | #
|
|---|
| 6 |
|
|---|
| 7 | # nvidia driver parameters:
|
|---|
| 8 | #accelerant "nvidia.accelerant" # if enabled selects accelerant filename to be used
|
|---|
| 9 | #primary "10de_0110_010000" # if enabled selects device to be used as primary device ('hack')
|
|---|
| 10 | dumprom false # dump bios rom to file (in home folder)
|
|---|
| 11 |
|
|---|
| 12 | # nvidia.accelerant parameters:
|
|---|
| 13 | usebios true # if true rely on bios to coldstart the card
|
|---|
| 14 | #memory 2 # in MB, override builtin memory size detection
|
|---|
| 15 | hardcursor false # if true use on-chip cursor capabilities
|
|---|
| 16 | #logmask 0x00000000 # nothing logged, is default
|
|---|
| 17 | #logmask 0x08000604 # log overlay use in full to file (in home folder)
|
|---|
| 18 | #logmask 0xffffffff # log everything to file (in home folder)
|
|---|
| 19 | switchhead false # switch head assignment (dualhead cards only)
|
|---|
| 20 | force_pci false # block AGP mode use if true (AGP cards only)
|
|---|
| 21 | dma_acc true # if true enable DMA cmd fetching for 2D acc (instead of using PIO)
|
|---|
| 22 | #tv_output 0 # disabled or 0 = autodetect, 1 = Y/C (and CVBS if possible), 2 = CVBS
|
|---|
| 23 | force_sync false # if true forces 3D rendering to be synchronized to the vertical retrace
|
|---|
| 24 | force_ws false # if true forces widescreen type detection for all connected screens
|
|---|
| 25 | block_acc false # if true disables the acceleration engine
|
|---|
| 26 |
|
|---|
| 27 | # WARNING: tweak alert! modify stuff below on your own risk...
|
|---|
| 28 | unhide_fw false # if true 'unhide' cards AGP fastwrite support on cards that hide it
|
|---|
| 29 | pgm_panel false # if false don't program DVI and laptop panel pixelclocks (refreshrates)
|
|---|
| 30 | vga_on_tv false # if true enables VGA output on the head outputting to TV
|
|---|
| 31 | #gpu_clk 150 # in Mhz, (tries to) override default GPU clockspeed (be carefull!!!)
|
|---|
| 32 | #ram_clk 150 # in Mhz, (tries to) override default cardRAM clockspeed (be carefull!!!)
|
|---|
| 33 |
|
|---|
| 34 | #--------- that's all.
|
|---|
| 35 |
|
|---|
| 36 |
|
|---|
| 37 | #logmask setup info:
|
|---|
| 38 | #log level select:
|
|---|
| 39 | #logmask 0x0000000x # lowest digit: bitmask to select logging level.
|
|---|
| 40 |
|
|---|
| 41 | #log modules select:
|
|---|
| 42 | #logmask 0xxxxxxxx0 # highest 7 digits: bitmask to select individual modules to log.
|
|---|
| 43 |
|
|---|
| 44 | #log levels: (3D add-on adheres to this setup, 2D add-on still has to tuned)
|
|---|
| 45 | #logmask 0x00000001 # log rendering
|
|---|
| 46 | #logmask 0x00000002 # log state
|
|---|
| 47 | #logmask 0x00000004 # log experimental
|
|---|
| 48 | #logmask 0x00000008 # log errors
|
|---|
| 49 |
|
|---|
| 50 | #log modules:
|
|---|
| 51 | #logmask 0x00000100 # engine: agp
|
|---|
| 52 | #logmask 0x00000200 # engine: bes
|
|---|
| 53 | #logmask 0x00000400 # overlay
|
|---|
| 54 | #logmask 0x00000800 # engine: support
|
|---|
| 55 | #logmask 0x00001000 # engine: dac2
|
|---|
| 56 | #logmask 0x00002000 # engine: info
|
|---|
| 57 | #logmask 0x00004000 # engine: i2c
|
|---|
| 58 | #logmask 0x00008000 # engine: general
|
|---|
| 59 | #logmask 0x00010000 # engine: dac1
|
|---|
| 60 | #logmask 0x00020000 # engine: crtc2
|
|---|
| 61 | #logmask 0x00040000 # engine: crtc1
|
|---|
| 62 | #logmask 0x00080000 # engine: acc (both PIO and DMA)
|
|---|
| 63 | #logmask 0x00100000 # engine: brooktree tv
|
|---|
| 64 | #logmask 0x00200000 # set displaymode
|
|---|
| 65 | #logmask 0x00400000 # propose displaymode
|
|---|
| 66 | #logmask 0x00800000 # init accelerant
|
|---|
| 67 | #logmask 0x01000000 # get timing constraints
|
|---|
| 68 | #logmask 0x02000000 # get mode info
|
|---|
| 69 | #logmask 0x04000000 # get device info
|
|---|
| 70 | #logmask 0x08000000 # get accelerant hook
|
|---|
| 71 | #logmask 0x10000000 # engine management
|
|---|
| 72 | #logmask 0x20000000 # cursor
|
|---|
| 73 | #logmask 0x40000000 # 2D acceleration
|
|---|
| 74 | #logmask 0x80000000 # 3D acceleration
|
|---|
