#13056 closed enhancement (fixed)
Support for PCIe USB 3.0 Cards
| Reported by: | vidrep | Owned by: | nobody |
|---|---|---|---|
| Priority: | normal | Milestone: | R1/beta2 |
| Component: | Drivers/USB/XHCI | Version: | R1/Development |
| Keywords: | Cc: | ||
| Blocked By: | Blocking: | ||
| Platform: | All |
Description
Owners of older PC's may want to upgrade to USB 3.0 using a PCIe card.
Attachments (5)
Change History (22)
comment:2 by , 8 years ago
StarTech PEXUSB3S23 device Serial bus controller (USB controller, XHCI) [c|3|30] vendor 1b6f: Etron Technology, Inc. device 7023: EJ168 USB 3.0 Host Controller This card failed to work with any USB device I tried.
comment:3 by , 8 years ago
I did a round of testing with these two cards using hrev50677 x86_gcc2. After inserting each card and booting Haiku, I would connect the following USB devices and serial log the output to another PC.
Device 1 - Kingston DTSE9 G2 USB 3.0 8GB memory stick formatted with BFS
"Kingston Technology" "DataTraveler 100 G3/G4/SE9 G2" ver. 0110
Device 2 - Seagate 250GB laptop HDD ST9250827AS connected using a StarTech
USB3S2SAT3CB USB 3.0 to SATA adapter cable
"ASMedia Technology Inc." "ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge" ver. 0100
by , 8 years ago
| Attachment: | serial_log_GC-USB3.1 added |
|---|
by , 8 years ago
| Attachment: | serial_log_PEXUSB3S23 added |
|---|
comment:4 by , 7 years ago
Please give this a try post- hrev51536 . a pretty large bug in xhci was discovered + fixed.
Thanks!
comment:5 by , 7 years ago
Tested both plug-in cards today with hrev51541 x86_64. Neither card detects USB 3.0 devices plugged into the ports.
On the bright side, my on-board USB 3.0 controller is now working. Details below:
device Serial bus controller (USB controller, XHCI) [c|3|30]
vendor 8086: Intel Corporation
device 1e31: 7 Series/C210 Series Chipset Family USB xHCI Host Controller
comment:7 by , 6 years ago
Tested again with hrev52775 x86_64. Turn's out the Gigabyte card is defective (Haiku won't boot). However, the StarTech is working, but is not detected. On-board USB still working OK. So, no change.
by , 6 years ago
comment:12 by , 6 years ago
So ... there aren't any XHCI errors in that syslog (unlike the first syslog where there were). The controllers appear to initialize successfully. But there are EHCI errors:
KERN: usb error ehci -1: qtd (0x182d5200) error: 0x00058d46 KERN: usb error ehci -1: qtd (0x182d5c80) error: 0x00088d46
Are you sure your devices are really on USB3 ports?
comment:13 by , 6 years ago
hrev52901 x86_64. As soon as a USB 3 memory stick is inserted into the StarTech card, Haiku goes into KDL. Photo attached of KDL.
by , 6 years ago
| Attachment: | IMG_0064.JPG added |
|---|
by , 6 years ago
| Attachment: | IMG_0065.JPG added |
|---|
comment:14 by , 6 years ago
I ran into that same KDL while testing other changes to the XHCI driver, and fixed it in hrev52916. Please retest after that.
comment:15 by , 6 years ago
Tested StarTech PCIe USB 3.0 card with hrev52926 and it is now working. Close the ticket. Thanks!
comment:16 by , 6 years ago
| Resolution: | → fixed |
|---|---|
| Status: | new → closed |
comment:17 by , 5 years ago
| Milestone: | Unscheduled → R1/beta2 |
|---|
Assign tickets with status=closed and resolution=fixed within the R1/beta2 development window to the R1/beta2 Milestone
Gigabyte GC-USB3.1 device Serial bus controller (USB controller, XHCI) [c|3|30] vendor 1b21: ASMedia Technology Inc. device 1242: ASM1142 USB 3.1 Host Controller This card will work with any USB 2.0 device I tried, but fails to detect USB 3.0 devices.