[atheroswifi] (ath_pci) unable to attach hardware; HAL status 3

[LeapingFrog]

haiku-master-hrev52357-x86_gcc2_hybrid-anyboot

Failure in Setting up Atheros Wireless Network Adapter (WIFI on PC: FM V-Bibilo Loox U50X/V)

installed on PC (FM V-Bibilo Loox U50X/V) via USB
fails to set-up WIFI.
In the Terminal, I could not configure WIFI:
ifconfig does not detect WIFI.
However, listdev knows the device for WIFI.
In the syslog, an error is reported in the process of setting up atheroswifi .

~/documents/enter_Haiku> ls /dev/net
rtl8139
~/documents/enter_Haiku> ifconfig -a
loop    Hardware type: Local Loopback, Address: none
        inet addr: 127.0.0.1, Mask: 255.0.0.0
        inet6 addr: ::1, Prefix Length: 128
        MTU: 16384, Metric: 0, up loopback link
        Receive: 0 packets, 0 errors, 0 bytes, 0 mcasts, 0 dropped
        Transmit: 0 packets, 0 errors, 0 bytes, 0 mcasts, 0 dropped
        Collisions: 0

/dev/net/rtl8139/0
        Hardware type: Ethernet, Address: 00:17:42:8a:ec:78
        inet addr: --, Bcast: --, Mask: --
        MTU: 1500, Metric: 0, up broadcast
        Receive: 0 packets, 0 errors, 0 bytes, 0 mcasts, 0 dropped
        Transmit: 0 packets, 0 errors, 0 bytes, 0 mcasts, 0 dropped
        Collisions: 0

~/documents/enter_Haiku> listdev 
...
device Network controller (Ethernet controller) [2|0|0]
  vendor 10ec: Realtek Semiconductor Co., Ltd.
  device 8139: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
...
device Network controller (Ethernet controller) [2|0|0]
  vendor 168c: Qualcomm Atheros
  device 001c: AR242x / AR542x Wireless Network Adapter (PCI-Express)
...

---

...
KERN: package_daemon [30308584:   337] Volume::InitialVerify(): volume at "/boot/home/config" is consistent
KERN: [atheroswifi] (ath_pci) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1,0x2)
KERN: add_memory_type_range(4011, 0xf0000000, 0x10000, 0)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x3f670000, size:    0x10000, type: 0
KERN:   mtrr:  1: base: 0x3f680000, size:    0x80000, type: 0
KERN:   mtrr:  2: base: 0xf0000000, size: 0x10000000, type: 0
KERN:   mtrr:  3: base: 0x80000000, size: 0x80000000, type: 1
KERN: [atheroswifi] (ath_pci) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1,0x6)
KERN: [atheroswifi] (ath_pci) unable to attach hardware; HAL status 3
KERN: remove_memory_type_range(4011, 0xf0000000, 0x10000, 0)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x3f670000, size:    0x10000, type: 0
KERN:   mtrr:  1: base: 0x3f680000, size:    0x80000, type: 0
KERN:   mtrr:  2: base: 0xf0000000, size: 0x10000000, type: 0
KERN:   mtrr:  3: base: 0x80000000, size: 0x80000000, type: 1
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/usb_hid
...

I verified the WIFI by rebooting Windows Vista.
Windows Vista detects WIFI and routers.
After that I rebooted to Haiku again.
Then, I collected the data and included in this bug-report.

[LeapingFrog]

I missed the entry "Platform". Should I put the machine's type in this entry?