XHCI: "found device with invalid IRQ - check IRQ assignment"

[Jose64141]

I tried to install Haiku from an USB, but I always got the Unable to find boot partition error. So, I tried to run the Installer from the HDD, and it worked, but not the USB mouse. PS: I have a TUF H370 PRO mobo

[waddlesplash]

Please post a syslog; one from your working install is fine.

[waddlesplash]

KERN: usb xhci: found device with invalid IRQ - check IRQ assignment

Well, that's a new one; I've never seen that message before!

[mmlr]

The system seems to support MSIs (as the HDA driver uses one) so it is a bit surprising XHCI wouldn't be using those. The early part of the boot seems to be missing from the syslog, which holds the PCI dump and interrupt setup, so it's hard to say what's going on. Can you try removing the syslogs and booting fresh and attach a new syslog and possibly syslog.old if it exists?

[Jose64141]

I think it is the same :p

[waddlesplash]

This should be fixed in hrev52742; please test.

[Jose64141]

Replying to waddlesplash:

This should be fixed in hrev52742; please test.

I tested hrev52749, and it booted :D And I have Ethernet c: But, when I try yo mount an external HDD, the USB devices stop working :c I remember when I had my old PC, sometimes I got the same error So i have to restart the computer and bla bla, but at least Y can use the mouse :) I will attach the syslog after and before I mounted the HDD

[Jose64141]

After HDD and restart.

[Jose64141]

Before HDD

[waddlesplash]

That's already tracked as #13772. So this issue is fixed. :)

[nielx]

Assign tickets with status=closed and resolution=fixed within the R1/beta2 development window to the R1/beta2 Milestone