Boot fails with "PANIC: did not find any boot partitions!"

[Paradoxon]

Trying again to get haiku 64 bit working on my schenker slim, brought me on directly to kdl when enabeling all save modes. Kdl occurs on the 4th icon

[Paradoxon]

i could narrow down the safemode option which is the cause. This kdl only happens when local apic is enabled. Else it just crashs with a crazy app server error

[diver]

Is this with UEFI or BIOS booting?

Also please create a new ticket about this app_server crash.

[kallisti5]

I can confirm seeing this on my Ryzen 1800x desktop. USB 3 Hub + three different USB 3 Flash drives. System fully powered off inbetween each attempt. Each boot attempted 3 times. All EFI boot.

• hrev55104 x86_64
  • Refind: No boot partitions KDL
  • Native: No boot partitions KDL
• hrev55100 x86_64
  • Refind: No boot partitions KDL
  • Native: No boot partitions KDL

We have had this issue for quite some time. I made sure my new desktop board had a PS2 port so KDL keyboard would work :-D

syslog from hrev55104:

usb xhci -1: using message signaled interrupts
usb xhci -1: starting XHCI host controller
usb xhci -1: successfully started the controller
usb xhci -1: interface version: 0x0100
usb xhci -1: ...
...
usb hub 84: port 2: new device connected (pretty sure this is the flash drive)
usb error xhci 2: unsuccessful command 11, error USB transaction (4)
usb error xhci 2: unable to set address
usb xhci 2: transfer error on slot 3 endpoint 1: Stall
usb error control pipe 85:  timeout waiting for queued request to complete
usb xhci 2: cancel queued transfers (1) for pipe 0xffffffff80858c80
usb error hub 84: error updating port status
usb error hub 84: debouncing port 2 failed: General system error
...
usb hub 84: port 2: new device connected
usb error xhci 2: unsuccessful command 11, error USB transaction (4)
usb error xhci 2: unable to set address
...

[topolinik]

KDL when booting R1beta3

[topolinik]

I can confirm this appearing on R1beta3 (screenshot attached). I flashed the anyboot image file onto an USB stick and booted, always crashing at the fourth icon.

Edit: my cpu is an intel i7 7500u @2.7 GHz (2+2 cores)

[waddlesplash]

Please retest under a recent nightly, and extract more of the syslog if you can.

[topolinik]

I flashed hrev55607 on my USB stick and now it boots properly (i7 7500u on UEFI), I can setup a BeFS partition and install my OS - everything goes smooth.

I'm afraid I don't know how to extract syslog, can you point me to some docs ?

[waddlesplash]

If it boots successfully then the problem is fixed and I don't really need a syslog.

The original ticket author has not replied in almost a year, so let's consider this fixed.