Fresh install of Beta 3 on Dell Latitude D500 will not boot unless net_server is disabled (driver issue?)

[gjlgg]

I just installed Beta 3 on a Dell Latitude D500, and I've been having troubles getting it to boot. Originally it would only boot in SafeMode, but I was able to narrow it down to just needed to disable net_server. If I disable net_server, everything (but the network) seems to be exactly as I expect it. If I do not disable net_server, after the Rocket icon the screen goes black and nothing else happens. I did launch KDL and got some information that way, but the system won't boot. I attach a photo of the KDL, the syslog, and the output of listdev.

My D500 has the following networking hardware:

• Intel PRO/100 VE (ethernet)
• Intel PRO/Wireless 2100 3B (wireless)
• Intel 82801DB/DBL/DBM (AC'97 Modem)

Desired outcome: to be able to use Haiku with net_server enabled (and ultimately boot normally and use networking).

Note that this is the x86 version because the Pentium M is 32-bit.

[gjlgg]

Output of listdev

[gjlgg]

Copy of syslog file

[gjlgg]

Photograph of KDL with output from bt and ints