5 | | options = 0 |
6 | | APM version 0.0 available, flags 0. |
7 | | smp: using ACPI to detect MP configuration |
8 | | smp: local apic address is 0xfee00000 |
9 | | smp: found local APIC with id 0 |
10 | | smp: found local APIC with id 1 |
11 | | smp: found local APIC with id 2 |
12 | | smp: found local APIC with id 3 |
13 | | smp: found io APIC with id 4 and address 0xfec00000 |
14 | | VESA version = 2.0, capabilities 1 |
15 | | OEM string: VirtualBox VESA BIOS |
16 | | 0x100: 640 x 400 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1) |
17 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
18 | | 0x101: 640 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1) |
19 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
20 | | 0x102: 800 x 600 x 4 (a = 31, mem = 3, phy = e0000000, p = 4, b = 1) |
21 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
22 | | 0x103: 800 x 600 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1) |
23 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
24 | | 0x104: 1024 x 768 x 4 (a = 31, mem = 3, phy = e0000000, p = 4, b = 1) |
25 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
26 | | 0x105: 1024 x 768 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1) |
27 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
28 | | 0x106: 1280 x 1024 x 4 (a = 31, mem = 3, phy = e0000000, p = 4, b = 1) |
29 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
30 | | 0x107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1) |
31 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
32 | | 0x10d: 320 x 200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
33 | | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 0 |
34 | | 0x10e: 320 x 200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
35 | | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 |
36 | | 0x10f: 320 x 200 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
37 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 |
38 | | 0x110: 640 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
39 | | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 0 |
40 | | 0x111: 640 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
41 | | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 |
42 | | 0x112: 640 x 480 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
43 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 |
44 | | 0x113: 800 x 600 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
45 | | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 0 |
46 | | 0x114: 800 x 600 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
47 | | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 |
48 | | 0x115: 800 x 600 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
49 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 |
50 | | 0x116: 1024 x 768 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
51 | | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 0 |
52 | | 0x117: 1024 x 768 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
53 | | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 |
54 | | 0x118: 1024 x 768 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
55 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 |
56 | | 0x119: 1280 x 1024 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
57 | | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 0 |
58 | | 0x11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
59 | | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 |
60 | | 0x11b: 1280 x 1024 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
61 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 |
62 | | 0x140: 320 x 200 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
63 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 2 |
64 | | 0x141: 640 x 400 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
65 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 2 |
66 | | 0x142: 640 x 480 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
67 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 2 |
68 | | 0x143: 800 x 600 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
69 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 2 |
70 | | 0x144: 1024 x 768 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
71 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 2 |
72 | | 0x145: 1280 x 1024 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
73 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 2 |
74 | | 0x146: 320 x 200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1) |
75 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
76 | | 0x147: 1600 x 1200 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
77 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 2 |
78 | | 0x148: 1152 x 864 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1) |
79 | | mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0 |
80 | | 0x149: 1152 x 864 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
81 | | mask: r: 5 10 g: 5 5 b: 5 0 dcmi: 0 |
82 | | 0x14a: 1152 x 864 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
83 | | mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0 |
84 | | 0x14b: 1152 x 864 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
85 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0 |
86 | | 0x14c: 1152 x 864 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1) |
87 | | mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 2 |
88 | | Using mode 0x144 |
89 | | VESA compatible graphics! |
90 | | Welcome to the Haiku boot loader! |
91 | | Haiku revision: hrev58538 |
92 | | number of drives: 1 |
93 | | add_partitions_for(0x001014b8, mountFS = no) |
94 | | add_partitions_for(fd = 0, mountFS = no) |
95 | | 0x00101620 Partition::Partition |
96 | | 0x00101620 Partition::Scan() |
97 | | check for partitioning_system: GUID Partition Map |
98 | | check for partitioning_system: Intel Partition Map |
99 | | priority: 810 |
100 | | check for partitioning_system: Intel Extended Partition |
101 | | 0x00101798 Partition::Partition |
102 | | 0x00101620 Partition::AddChild 0x00101798 |
103 | | 0x00101798 Partition::SetParent 0x00101620 |
104 | | new child partition! |
105 | | 0x00101620 Partition::Scan(): scan child 0x00101798 (start = 32768, size = 23621271552, parent = 0x00101620)! |
106 | | 0x00101798 Partition::Scan() |
107 | | check for partitioning_system: GUID Partition Map |
108 | | check for partitioning_system: Intel Partition Map |
109 | | check for partitioning_system: Intel Extended Partition |
110 | | 0x00101620 Partition::~Partition |
111 | | 0x00101798 Partition::SetParent 0x00000000 |
112 | | boot partition offset: 32768 |
113 | | 0x00101798 Partition::_Mount check for file_system: BFS Filesystem |
114 | | PackageVolumeInfo::SetTo() |
115 | | load kernel kernel_x86_64... |
116 | | video mode: 800x600x32 |
117 | | ucode_load: system/non-packaged/data/firmware/intel-ucode/06-3a-09 |
118 | | ucode_load: couldn't find microcode |
119 | | smp: found 4 cpus |
120 | | smp: apic_phys = 0xfee00000 |
121 | | smp: ioapic_phys = 0xfec00000 |
122 | | smp: apic (mapped) = 0x81afb000 |
123 | | APIC ticks/sec = 988557077 |
124 | | GDT at 0x5ee80 |
125 | | phys memory ranges: |
126 | | base 0x0000000000100000, length 0x000000007fef0000 |
127 | | allocated phys memory ranges: |
128 | | base 0x0000000000100000, length 0x0000000000181000 |
129 | | base 0x0000000000800000, length 0x0000000000a63000 |
130 | | base 0x0000000003f00000, length 0x0000000000100000 |
131 | | allocated virt memory ranges: |
132 | | base 0xffffffff80000000, length 0x0000000001b09000 |
133 | | maximum boot loader heap usage: 783216, currently used: 554184 |
134 | | kernel args ranges: |
135 | | base 0xffffffff81107000, length 0x000000000006e000 |
136 | | base 0xffffffff8134a000, length 0x000000000002e000 |
137 | | base 0xffffffff813c5000, length 0x0000000000010000 |
138 | | base 0xffffffff8142b000, length 0x0000000000010000 |
139 | | base 0xffffffff8144a000, length 0x0000000000010000 |
140 | | base 0xffffffff81524000, length 0x000000000002d000 |
141 | | base 0xffffffff817b7000, length 0x0000000000010000 |
142 | | base 0xffffffff81807000, length 0x0000000000010000 |
143 | | base 0xffffffff8185d000, length 0x0000000000010000 |
144 | | base 0xffffffff818a4000, length 0x0000000000010000 |
145 | | base 0xffffffff818ef000, length 0x0000000000010000 |
146 | | base 0xffffffff81934000, length 0x0000000000010000 |
147 | | base 0xffffffff819dc000, length 0x0000000000010000 |
148 | | base 0xffffffff81a21000, length 0x000000000001e000 |
149 | | base 0xffffffff81a63000, length 0x0000000000010000 |
150 | | base 0xffffffff81ad1000, length 0x0000000000010000 |
151 | | base 0xffffffff81ae7000, length 0x0000000000010000 |
152 | | kernel entry at 0xffffffff800699b0 |
153 | | Welcome to kernel debugger output! |
154 | | Haiku revision: hrev58538, debug level: 2 |
155 | | CPU: no microcode provided |
156 | | CPU 0: type 0 family 6 extended_family 0 model 10 extended_model 3 stepping 9, string 'GenuineIntel' |
157 | | CPU 0: vendor 'Intel' model name 'Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz' |
158 | | CPU 0: apic id 0, package 0, core 0, smt 0 |
159 | | CPU 0: cache sharing: L1 id 0, L2 id 0, L3 id 0 |
160 | | CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh mmx fxsr sse sse2 htt sse3 pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 popcnt aes xsave avx f16c rdrnd hypervisor syscall nx long arat l1d_flush constant_tsc |
161 | | CPU 0: patch_level 0x0 |
162 | | using PAT for memory type configuration |
163 | | PAT MSR on CPU 0 before init: 0x7040600070406 |
164 | | PAT MSR on CPU 0 after init: 0x7040100070406 |
165 | | reserve_io_interrupt_vectors: reserved 16 vectors starting from 0 |
166 | | mark_page_range_in_use(0x0, 0x100): start page is before free list |
167 | | mark_page_range_in_use(0x0, 0xa0): start page is before free list |
168 | | mapping local apic at 0xffffffff81afb000 |
169 | | arch_altcodepatch_replace found 2 altcodepatches for tag 3 |
170 | | arch_altcodepatch_replace found 4 altcodepatches for tag 4 |
171 | | enable XSAVE 0x7 832 |
172 | | CPU 3: type 0 family 6 extended_family 0 model 10 extended_model 3 stepping 9, string 'GenuineIntel' |
173 | | CPU 1: type 0 family 6 extended_family 0 model 10 extended_model 3 stepping 9, string 'GenuineIntel' |
174 | | CPU 2: type 0 family 6 extended_family 0 model 10 extended_model 3 stepping 9, string 'GenuineIntel' |
175 | | CPU 3: vendor 'Intel' model name 'Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz' |
176 | | CPU 2: vendor 'Intel' model name 'Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz' |
177 | | CPU 3: apic id 3, package 0, core 3, smt 0 |
178 | | CPU 3: cache sharing: L1 id 3, L2 id 3, L3 id 3 |
179 | | CPU 1: vendor 'Intel' model name 'Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz' |
180 | | CPU 1: apic id 1, package 0, core 1, smt 0 |
181 | | CPU 1: cache sharing: L1 id 1, L2 id 1, L3 id 1 |
182 | | CPU 1: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh mmx fxsr sse sse2 htt sse3 pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 popcnt aes xsave osxsave avx f16c rdrnd hypervisor syscall nx long arat l1d_flush constant_tsc |
183 | | CPU 1: patch_level 0x0 |
184 | | CPU 3: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh mmx fxsr sse sse2 htt sse3 pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 popcnt aes xsave osxsave avx f16c rdrnd hypervisor syscall nx long arat l1d_flush constant_tsc |
185 | | PAT MSR on CPU 1 before init: 0x7040600070406 |
186 | | CPU 3: patch_level 0x0 |
187 | | CPU 2: apic id 2, package 0, core 2, smt 0 |
188 | | PAT MSR on CPU 3 before init: 0x7040600070406 |
189 | | PAT MSR on CPU 1 after init: 0x7040100070406 |
190 | | PAT MSR on CPU 3 after init: 0x7040100070406 |
191 | | CPU 2: cache sharing: L1 id 2, L2 id 2, L3 id 2 |
192 | | CPU 2: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh mmx fxsr sse sse2 htt sse3 pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 popcnt aes xsave osxsave avx f16c rdrnd hypervisor syscall nx long arat l1d_flush constant_tsc |
193 | | CPU 2: patch_level 0x0 |
194 | | PAT MSR on CPU 2 before init: 0x7040600070406 |
195 | | PAT MSR on CPU 2 after init: 0x7040100070406 |
196 | | setting up apic for CPU 0: apic id 0, version 327700 |
197 | | CPU 0: logical apic id: 0x1 |
198 | | x86_init_fpu: CPU has SSE... enabling FXSR and XMM. |
199 | | reserve_io_interrupt_vectors: reserved 3 vectors starting from 221 |
200 | | reserve_io_interrupt_vectors: reserved 1 vectors starting from 219 |
201 | | arch_init_timer: using APIC timer. |
202 | | allocate_commpage_entry(2, 16) -> 0x0000000000000200 |
203 | | scheduler_init: found 4 logical cpus and 3 cache levels |
204 | | scheduler switches: single core: false, cpu load tracking: false, core load tracking: true |
205 | | scheduler: switching to low latency mode |
206 | | msi support enabled |
207 | | setting up apic for CPU 3: apic id 3, version 327700 |
208 | | CPU 3: logical apic id: 0x8 |
209 | | setting up apic for CPU 1: apic id 1, version 327700 |
210 | | setting up apic for CPU 2: apic id 2, version 327700 |
211 | | x86_init_fpu: CPU has SSE... enabling FXSR and XMM. |
212 | | CPU 1: logical apic id: 0x2 |
213 | | x86_init_fpu: CPU has SSE... enabling FXSR and XMM. |
214 | | CPU 2: logical apic id: 0x4 |
215 | | x86_init_fpu: CPU has SSE... enabling FXSR and XMM. |
216 | | slab memory manager: created area 0xffffffff80801000 (159) |
217 | | allocate_commpage_entry(3, 69) -> 0x0000000000000210 |
218 | | PCI: pci_module_init |
219 | | slab memory manager: created area 0xffffffff86001000 (161) |
220 | | assuming memory type 50000000 for overlapping 0x0, 0x1000 area 165 from existing 0x0, 0xa0000 area 3 |
221 | | assuming memory type 50000000 for overlapping 0x9f000, 0x1000 area 166 from existing 0x0, 0xa0000 area 3 |
222 | | ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX ) |
223 | | ACPI: XSDT 0x000000007FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061) |
224 | | ACPI: FACP 0x000000007FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) |
225 | | ACPI: DSDT 0x000000007FFF0620 002353 (v02 VBOX VBOXBIOS 00000002 INTL 20200925) |
226 | | ACPI: FACS 0x000000007FFF0200 000040 |
227 | | ACPI: APIC 0x000000007FFF0240 00006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061) |
228 | | ACPI: SSDT 0x000000007FFF02B0 00036C (v01 VBOX VBOXCPUT 00000002 INTL 20200925) |
229 | | ACPI: Forced DSDT copy: length 0x02353 copied locally, original unmapped |
230 | | ACPI: 2 ACPI AML tables successfully acquired and loaded |
231 | | ACPI: Enabled 2 GPEs in block 00 to 07 |
232 | | publish device: node 0xffffffff8215cbe0, path acpi/namespace, module bus_managers/acpi/namespace/device_v1 |
233 | | publish device: node 0xffffffff8215cbe0, path acpi/call, module bus_managers/acpi/call/device_v1 |
234 | | registering power button |
235 | | registering sleep button |
236 | | PCI: mechanism 1 controller found |
237 | | PCI: find_pci_capability ERROR 0:12:0 capability 0x5 empty list |
238 | | PCI: find_pci_capability ERROR 0:12:0 capability 0x11 empty list |
239 | | PCI: find_pci_capability ERROR 0:12:0 capability 0x8 empty list |
240 | | found io-apic with address 0xfec00000, global interrupt base 0, apic-id 4 |
241 | | mapping io-apic 0 at physical address 0xfec00000 |
242 | | io-apic 0 has range 0-23, 24 entries, version 0x00170020, apic-id 4 |
243 | | setting ACPI interrupt model to APIC |
244 | | IRQ routing table with 7 entries |
245 | | address 0x2ffff; pin 0; GSI 18; pci 0:2 pin 1 func mask 1; bios irq: 10; gsi 18; config 0x06 |
246 | | address 0x4ffff; pin 0; GSI 20; pci 0:4 pin 1 func mask 1; bios irq: 11; gsi 20; config 0x06 |
247 | | address 0x7ffff; pin 0; GSI 23; pci 0:7 pin 1 func mask 1; bios irq: 9; gsi 23; config 0x06 |
248 | | address 0x8ffff; pin 0; GSI 16; pci 0:8 pin 1 func mask 1; bios irq: 11; gsi 16; config 0x06 |
249 | | address 0xcffff; pin 0; GSI 20; pci 0:12 pin 1 func mask 1; bios irq: 11; gsi 20; config 0x06 |
250 | | address 0xdffff; pin 0; GSI 21; pci 0:13 pin 1 func mask 1; bios irq: 11; gsi 21; config 0x06 |
251 | | address 0x11ffff; pin 0; GSI 17; pci 0:17 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06 |
252 | | found interrupt override for bus 0, source irq 0, global irq 2, flags 0x00000000 |
253 | | found interrupt override for bus 0, source irq 9, global irq 9, flags 0x0000000f |
254 | | free_io_interrupt_vectors: freeing 16 vectors starting from 0 |
255 | | reserve_io_interrupt_vectors: reserved 24 vectors starting from 0 |
256 | | using io-apics for interrupt routing |
257 | | PCI: find_pci_capability ERROR 0:12:0 capability 0x5 empty list |
258 | | PCI: find_pci_capability ERROR 0:12:0 capability 0x11 empty list |
259 | | PCI: find_pci_capability ERROR 0:12:0 capability 0x8 empty list |
260 | | PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 1237, revision 02 |
261 | | PCI: class_base 06, class_function 00, class_api 00 |
262 | | PCI: vendor 8086: Intel Corporation |
263 | | PCI: device 1237: 440FX - 82441FX PMC [Natoma] |
264 | | PCI: info: Bridge (Host bridge) |
265 | | PCI: line_size 00, latency 00, header_type 00, BIST 00 |
266 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
267 | | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 |
268 | | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 |
269 | | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 |
270 | | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 |
271 | | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 |
272 | | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 |
273 | | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 |
274 | | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 |
275 | | PCI: Capabilities: (not supported) |
276 | | PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7000, revision 00 |
277 | | PCI: class_base 06, class_function 01, class_api 00 |
278 | | PCI: vendor 8086: Intel Corporation |
279 | | PCI: device 7000: 82371SB PIIX3 ISA [Natoma/Triton II] |
280 | | PCI: info: Bridge (ISA bridge) |
281 | | PCI: line_size 00, latency 00, header_type 80, BIST 00 |
282 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
283 | | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 |
284 | | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00 |
285 | | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 |
286 | | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 |
287 | | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 |
288 | | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 |
289 | | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 |
290 | | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 |
291 | | PCI: Capabilities: (not supported) |
292 | | PCI: [dom 0, bus 0] bus 0, device 2, function 0: vendor 15ad, device 0405, revision 00 |
293 | | PCI: class_base 03, class_function 00, class_api 00 |
294 | | PCI: vendor 15ad: VMware |
295 | | PCI: device 0405: SVGA II Adapter |
296 | | PCI: info: Display controller (VGA compatible controller, VGA controller) |
297 | | PCI: line_size 00, latency 00, header_type 00, BIST 00 |
298 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
299 | | PCI: cardbus_CIS 00000000, subsystem_id 0405, subsystem_vendor_id 15ad |
300 | | PCI: interrupt_line 12, interrupt_pin 01, min_grant 00, max_latency 00 |
301 | | PCI: base reg 0: host 0000d000, pci 0000d000, size 00000010, flags 01 |
302 | | PCI: base reg 1: host e0000000, pci e0000000, size 04000000, flags 08 |
303 | | PCI: base reg 2: host f0000000, pci f0000000, size 00200000, flags 00 |
304 | | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 |
305 | | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 |
306 | | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 |
307 | | PCI: Capabilities: (not supported) |
308 | | PCI: [dom 0, bus 0] bus 0, device 4, function 0: vendor 80ee, device cafe, revision 00 |
309 | | PCI: class_base 08, class_function 80, class_api 00 |
310 | | PCI: vendor 80ee: InnoTek Systemberatung GmbH |
311 | | PCI: device cafe: VirtualBox Guest Service |
312 | | PCI: info: Generic system peripheral |
313 | | PCI: line_size 00, latency 00, header_type 00, BIST 00 |
314 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
315 | | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 |
316 | | PCI: interrupt_line 14, interrupt_pin 01, min_grant 00, max_latency 00 |
317 | | PCI: base reg 0: host 0000d020, pci 0000d020, size 00000020, flags 01 |
318 | | PCI: base reg 1: host f0400000, pci f0400000, size 00400000, flags 00 |
319 | | PCI: base reg 2: host f0800000, pci f0800000, size 00004000, flags 08 |
320 | | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 |
321 | | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 |
322 | | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 |
323 | | PCI: Capabilities: (not supported) |
324 | | PCI: [dom 0, bus 0] bus 0, device 7, function 0: vendor 8086, device 7113, revision 08 |
325 | | PCI: class_base 06, class_function 80, class_api 00 |
326 | | PCI: vendor 8086: Intel Corporation |
327 | | PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI |
328 | | PCI: info: Bridge |
329 | | PCI: line_size 00, latency 00, header_type 80, BIST 00 |
330 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
331 | | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 |
332 | | PCI: interrupt_line 09, interrupt_pin 01, min_grant 00, max_latency 00 |
333 | | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00 |
334 | | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 |
335 | | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 |
336 | | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 |
337 | | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 |
338 | | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 |
339 | | PCI: Capabilities: (not supported) |
340 | | PCI: [dom 0, bus 0] bus 0, device 8, function 0: vendor 8086, device 100f, revision 02 |
341 | | PCI: class_base 02, class_function 00, class_api 00 |
342 | | PCI: vendor 8086: Intel Corporation |
343 | | PCI: device 100f: 82545EM Gigabit Ethernet Controller (Copper) (PRO/1000 MT Single Port Adapter) |
344 | | PCI: info: Network controller (Ethernet controller) |
345 | | PCI: line_size 00, latency 00, header_type 00, BIST 00 |
346 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
347 | | PCI: cardbus_CIS 00000000, subsystem_id 0750, subsystem_vendor_id 15ad |
348 | | PCI: interrupt_line 10, interrupt_pin 01, min_grant ff, max_latency 00 |
349 | | PCI: base reg 0: host f0820000, pci f0820000, size 00020000, flags 00 |
350 | | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 |
351 | | PCI: base reg 2: host 0000d040, pci 0000d040, size 00000008, flags 01 |
352 | | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 |
353 | | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 |
354 | | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 |
355 | | PCI: Capabilities: PM, PCI-X |
356 | | PCI: [dom 0, bus 0] bus 0, device 12, function 0: vendor 8086, device 1e31, revision 00 |
357 | | PCI: class_base 0c, class_function 03, class_api 30 |
358 | | PCI: vendor 8086: Intel Corporation |
359 | | PCI: device 1e31: 7 Series/C210 Series Chipset Family USB xHCI Host Controller |
360 | | PCI: info: Serial bus controller (USB controller, XHCI) |
361 | | PCI: line_size 00, latency 00, header_type 00, BIST 00 |
362 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
363 | | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 |
364 | | PCI: interrupt_line 14, interrupt_pin 01, min_grant 00, max_latency 00 |
365 | | PCI: base reg 0: host f0840000, pci f0840000, size 00010000, flags 00 |
366 | | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 |
367 | | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00 |
368 | | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 |
369 | | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 |
370 | | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 |
371 | | PCI: Capabilities: (empty list) |
372 | | PCI: find_pci_capability ERROR 0:12:0 capability 0x10 empty list |
373 | | PCI: [dom 0, bus 0] bus 0, device 13, function 0: vendor 8086, device 2829, revision 02 |
374 | | PCI: class_base 01, class_function 06, class_api 01 |
375 | | PCI: vendor 8086: Intel Corporation |
376 | | PCI: device 2829: 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] |
377 | | PCI: info: Mass storage controller (SATA controller, AHCI 1.0) |
378 | | PCI: line_size 00, latency 00, header_type 00, BIST 00 |
379 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
380 | | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000 |
381 | | PCI: interrupt_line 15, interrupt_pin 01, min_grant 00, max_latency 00 |
382 | | PCI: base reg 0: host 0000d048, pci 0000d048, size 00000008, flags 01 |
383 | | PCI: base reg 1: host 0000d050, pci 0000d050, size 00000004, flags 01 |
384 | | PCI: base reg 2: host 0000d058, pci 0000d058, size 00000008, flags 01 |
385 | | PCI: base reg 3: host 0000d060, pci 0000d060, size 00000004, flags 01 |
386 | | PCI: base reg 4: host 0000d070, pci 0000d070, size 00000010, flags 01 |
387 | | PCI: base reg 5: host f0850000, pci f0850000, size 00002000, flags 00 |
388 | | PCI: Capabilities: PM, SATA |
389 | | PCI: [dom 0, bus 0] bus 0, device 17, function 0: vendor 8086, device 100f, revision 02 |
390 | | PCI: class_base 02, class_function 00, class_api 00 |
391 | | PCI: vendor 8086: Intel Corporation |
392 | | PCI: device 100f: 82545EM Gigabit Ethernet Controller (Copper) (PRO/1000 MT Single Port Adapter) |
393 | | PCI: info: Network controller (Ethernet controller) |
394 | | PCI: line_size 00, latency 00, header_type 00, BIST 00 |
395 | | PCI: ROM base host 00000000, pci 00000000, size 00000000 |
396 | | PCI: cardbus_CIS 00000000, subsystem_id 0750, subsystem_vendor_id 15ad |
397 | | PCI: interrupt_line 11, interrupt_pin 01, min_grant ff, max_latency 00 |
398 | | PCI: base reg 0: host f0860000, pci f0860000, size 00020000, flags 00 |
399 | | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00 |
400 | | PCI: base reg 2: host 0000d080, pci 0000d080, size 00000008, flags 01 |
401 | | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00 |
402 | | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00 |
403 | | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00 |
404 | | PCI: Capabilities: PM, PCI-X |
405 | | usb xhci -1: interface version: 0x0100 |
406 | | usb xhci -1: structural parameters: 1:0x0e000820 2:0x00000059 3:0x00040001 |
407 | | usb xhci -1: capability parameters: 0x04000000 |
408 | | usb xhci -1: starting XHCI host controller |
409 | | usb xhci -1: successfully started the controller |
410 | | usb hub 2: port 0: new device connected |
411 | | usb error control pipe 6: timeout waiting for queued request to complete |
412 | | usb error xhci 0: TRB 0x58a020 was not found in the endpoint! |
413 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
414 | | usb error control pipe 7: timeout waiting for queued request to complete |
415 | | usb error xhci 0: TRB 0x58a020 was not found in the endpoint! |
416 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
417 | | usb hub 2: get_boot_partitions(): boot volume message: |
418 | | port 0: new device connected |
419 | | KMessage: buffer: 0xffffffff81ae9558 (size/capacity: 347/347), flags: 0xa |
420 | | field: "booted from image" (BOOL): false |
421 | | field: "partition offset" (LLNG): 32768 (0x8000) |
422 | | field: "packaged" (BOOL): true |
423 | | field: "boot method" (LONG): 0 (0x0) |
424 | | field: "boot drive number" (LLNG): 128 (0x80) |
425 | | field: "disk identifier" (RAWT): data at 0xffffffff81ae9664, 79 bytes |
426 | | get_boot_partitions(): boot method type: 0 |
427 | | ahci: AHCI controller Intel ICH8M (AHCI mode) found! |
428 | | ahci: ahci_register_device |
429 | | ahci: ahci_init_driver |
430 | | ahci: ahci_sim_init_bus |
431 | | ahci: ahci_sim_init_bus: pciDevice 0xffffffff825bf350 |
432 | | ahci: AHCIController::Init 0:13:0 vendor 8086, device 2829 |
433 | | ahci: PCI SATA capability found at offset 0xa8 |
434 | | ahci: satacr0 = 0x00100012, satacr1 = 0x00000028 |
435 | | ahci: pcicmd old 0x0007 |
436 | | ahci: pcicmd new 0x0006 |
437 | | ahci: registers at 0xf0850000, size 0x2000 |
438 | | ahci: mapping physical address 0xf0850000 with 8192 bytes for AHCI HBA regs |
439 | | ahci: physical = 0xf0850000, virtual = 0xffffffff812ce000, offset = 0, phyadr = 0xf0850000, mapadr = 0xffffffff812ce000, size = 8192, area = 0x000000d7 |
440 | | ahci: cap: Interface Speed Support: generation 2 |
441 | | ahci: cap: Number of Command Slots: 32 (raw 0x1f) |
442 | | ahci: cap: Number of Ports: 2 (raw 0x1) |
443 | | ahci: cap: Supports Port Multiplier: no |
444 | | ahci: cap: Supports External SATA: no |
445 | | ahci: cap: Enclosure Management Supported: no |
446 | | ahci: cap: FIS-based Switching Control: no |
447 | | ahci: cap: Supports Command List Override: no |
448 | | ahci: cap: Supports Staggered Spin-up: yes |
449 | | ahci: cap: Supports Mechanical Presence Switch: no |
450 | | ahci: cap: Supports 64-bit Addressing: yes |
451 | | ahci: cap: Supports Native Command Queuing: yes |
452 | | ahci: cap: Supports SNotification Register: no |
453 | | ahci: cap: Supports Command List Override: no |
454 | | ahci: cap: Supports AHCI mode only: yes |
455 | | ahci: ghc: AHCI Enable: yes |
456 | | ahci: Ports Implemented Mask: 0x000003 Number of Available Ports: 2 |
457 | | ahci: AHCI Version 0001.01.00 Interrupt 21 |
458 | | ahci: allocating 4096 bytes for AHCI port 0 |
459 | | ahci: area = 216, size = 4096, virt = 0xffffffff812e5000, phy = 0x22a6000 |
460 | | ahci: allocating 4096 bytes for AHCI port 1 |
461 | | ahci: area = 217, size = 4096, virt = 0xffffffff812e6000, phy = 0x22a7000 |
462 | | ahci: Probe: port 0 link speed 3.0Gb/s |
463 | | ahci: Probe: port 1 link speed 3.0Gb/s |
464 | | ahci: cookie = 0xffffffff82437900 |
465 | | ahci: ahci_path_inquiry, cookie 0xffffffff82437900 |
466 | | ahci: ahci_path_inquiry, cookie 0xffffffff82437900 |
467 | | ahci: ahci_scan_bus, cookie 0xffffffff82437900 |
468 | | ahci: sg_memcpy phyAddr 0x579060, size 96 |
469 | | ahci: ahci_get_restrictions, cookie 0xffffffff82437900 |
470 | | publish device: node 0xffffffff825cdf18, path disk/scsi/0/0/0/raw, module drivers/disk/scsi/scsi_disk/device_v1 |
471 | | ahci: ahci_get_restrictions, cookie 0xffffffff82437900 |
472 | | publish device: node 0xffffffff825cda18, path disk/scsi/0/1/0/raw, module drivers/disk/scsi/scsi_cd/device_v1 |
473 | | ahci: sg_memcpy phyAddr 0x579190, size 32 |
474 | | periph_check_capacity: TRIM: Setting trim support to disabled |
475 | | DMAResource@0xffffffff825cde78: low/high 0/100000000, max segment count 32, align 2, boundary 65536, max transfer 130560, max segment size 33554432 |
476 | | ahci: sg_memcpy phyAddr 0x579350, size 32 |
477 | | periph_check_capacity: TRIM: Setting trim support to disabled |
478 | | ahci: ahci_ioctl, cookie 0xffffffff82437900 |
479 | | ahci: Probe: port 1 link speed 3.0Gb/s |
480 | | ahci: sata_request::finish ATA command 0xa0 failed: status 0x41, error 0x20 |
481 | | ahci: sata_request::finish ATAPI packet 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00 (len 16) |
482 | | periph_check_capacity: TRIM: Setting trim support to disabled |
483 | | ahci: ahci_ioctl, cookie 0xffffffff82437900 |
484 | | identify(0, 0xffffffff825c89c8) |
485 | | raw_command: |
486 | | ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43 |
487 | | identify(0, 0xffffffff825c89b0) |
488 | | raw_command: |
489 | | ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43 |
490 | | device 0: /dev/disk/scsi/0/0/0/raw |
491 | | media status: No error |
492 | | device flags: 2 |
493 | | offset: 0 |
494 | | size: 23622320128 (22528 MB) |
495 | | content size: 23622320128 |
496 | | block size: 512 |
497 | | physical block size: 512 |
498 | | child count: 1 |
499 | | index: -1 |
500 | | status: 0 |
501 | | flags: 5 |
502 | | volume: -1 |
503 | | disk system: partitioning_systems/intel/map/v1 |
504 | | name: VBOX HARDDISK |
505 | | content name: <NULL> |
506 | | type: <NULL> |
507 | | content type: Intel Partition Map |
508 | | params: <NULL> |
509 | | content params: <NULL> |
510 | | partition 2: /dev/disk/scsi/0/0/0/0 |
511 | | offset: 32768 |
512 | | size: 23621271552 (22527 MB) |
513 | | content size: 23621271552 |
514 | | block size: 2048 |
515 | | physical block size: 512 |
516 | | child count: 0 |
517 | | index: 0 |
518 | | status: 0 |
519 | | flags: 2 |
520 | | volume: -1 |
521 | | disk system: file_systems/bfs/v1 |
522 | | name: <NULL> |
523 | | content name: haikudevroot |
524 | | type: Be File System |
525 | | content type: Be File System |
526 | | params: type = 235 ; active = 1 |
527 | | content params: <NULL> |
528 | | device 1: /dev/disk/scsi/0/1/0/raw |
529 | | media status: No media present |
530 | | device flags: 5 |
531 | | Identified boot partition by partition offset. |
532 | | ahci: sg_memcpy phyAddr 0x579460, size 32 |
533 | | periph_check_capacity: TRIM: Setting trim support to disabled |
534 | | ahci: sg_memcpy phyAddr 0x5793e0, size 32 |
535 | | periph_check_capacity: TRIM: Setting trim support to disabled |
536 | | bfs: mounted "haikudevroot" (root node at 524288, device = /dev/disk/scsi/0/0/0/0) |
537 | | Mounted boot partition: /dev/disk/scsi/0/0/0/0 |
538 | | unknown: [8021405: 17] Adding packages from "/boot/system/packages" |
539 | | slab memory manager: created area 0xffffffff87801000 (263) |
540 | | slab memory manager: created area 0xffffffff88001000 (265) |
541 | | slab memory manager: created area 0xffffffff88801000 (268) |
542 | | slab memory manager: created area 0xffffffff89001000 (269) |
543 | | slab memory manager: created area 0xffffffff89801000 (271) |
544 | | unknown: [9480389: 17] StringPool usage: |
545 | | unknown: [9481096: 17] total unique strings: 64303, 1159904 bytes, overhead: 1028848 bytes + 1048576 bytes |
546 | | unknown: [9482405: 17] total strings with dups: 312849, 4052256 bytes |
547 | | unknown: [9483265: 17] unshared strings: 2544 |
548 | | unknown: [9483871: 17] bytes saved: 814928 |
549 | | unknown: [9489595: 17] Adding packages from "/boot/home/config/packages" |
550 | | unknown: [9491265: 17] Failed to open packages activation file: No such file or directory |
551 | | unknown: [9492364: 17] Loading packages from activation file failed. Loading all packages in packages directory. |
552 | | unknown: [9500281: 17] StringPool usage: |
553 | | unknown: [9500857: 17] total unique strings: 64303, 1159904 bytes, overhead: 1028848 bytes + 1048576 bytes |
554 | | unknown: [9501973: 17] total strings with dups: 312860, 4052321 bytes |
555 | | unknown: [9502845: 17] unshared strings: 2541 |
556 | | unknown: [9503749: 17] bytes saved: 814993 |
557 | | module: Search for file_cache/launch_speedup/v1 failed. |
558 | | smbios_scan |
559 | | found System Information at 0xffffffff82145e38 |
560 | | found vendor 1 product 2 |
561 | | smbios_scan found vendor innotek GmbH product VirtualBox |
562 | | publish device: node 0xffffffff87d3f000, path disk/virtual/ram/control, module drivers/disk/virtual/ram_disk/control/device_v1 |
563 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/zero |
564 | | usb_modeswitch: init_hardware() |
565 | | usb_modeswitch: init_driver() |
566 | | usb_modeswitch: trying module bus_managers/usb/v3.1 |
567 | | usb error control pipe 8: timeout waiting for queued request to complete |
568 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
569 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
570 | | usb error control pipe 9: timeout waiting for queued request to complete |
571 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
572 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
573 | | usb_modeswitch: publish_devices() |
574 | | usb_modeswitch: uninit_driver() |
575 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/usb_modeswitch |
576 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/tty |
577 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/null |
578 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/dprintf |
579 | | con_init: trying module console/frame_buffer/v1 |
580 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/console |
581 | | swap_init_post_modules: virtual_memory is disabled |
582 | | mtrr: [cpu 2] MTRRs are enabled |
583 | | mtrr: [cpu 2] default type is 0 uncacheable |
584 | | mtrr: [cpu 2] fixed range MTRRs are enabled |
585 | | mtrr: [cpu 2] 0: base: 0x0; length: 0x80000000; type: 6 write-back |
586 | | ignoring MTRRs due to PAT support |
587 | | allocate_commpage_entry(4, 16) -> 0x0000000000000258 |
588 | | no valid cpufreq module found |
589 | | no valid cpuidle module found |
590 | | ignoring MTRRs due to PAT support |
591 | | kernel debugger extension "debugger/run_on_exit/v1": loaded |
592 | | kernel debugger extension "debugger/usb_keyboard/v1": loaded |
593 | | kernel debugger extension "debugger/invalidate_on_exit/v1": loaded |
594 | | kernel debugger extension "debugger/hangman/v1": loaded |
595 | | kernel debugger extension "debugger/disasm/v1": loaded |
596 | | publish device: node 0xffffffff821570a0, path random, module bus_managers/random/device_v1 |
597 | | publish device: node 0xffffffff821570a0, path urandom, module bus_managers/random/device_v1 |
598 | | publish device: node 0xffffffff8207ce68, path power/button/power_fixed, module drivers/power/acpi_button/device_v1 |
599 | | publish device: node 0xffffffff8207cc88, path power/button/sleep_fixed, module drivers/power/acpi_button/device_v1 |
600 | | publish device: node 0xffffffff8207cb48, path power/acpi_battery/0, module drivers/power/acpi_battery/device_v1 |
601 | | usb hub 2: port 0: new device connected |
602 | | slab memory manager: created area 0xffffffff8a001000 (3610) |
603 | | package_daemon: [22974441: 42] root at "/boot" (device: 3, node: 524288) registered |
604 | | package_daemon: [22976362: 42] volume at "/boot/system" registered |
605 | | package_daemon: [22977533: 42] volume at "/boot/home/config" registered |
606 | | Test: and [file_exists [/system/bin/FirstBootPrompt], or [not [file_exists [/boot/home/config/settings/Locale settings]], readonly ]] -> 0 |
607 | | register_domain(9, unix) |
608 | | register_domain(5, internet6) |
609 | | register_domain(1, internet) |
610 | | unregister_domain(0xffffffff895d0580, 9, unix) |
611 | | unregister_domain(0xffffffff895d0400, 1, internet) |
612 | | unregister_domain(0xffffffff895d0780, 5, internet6) |
613 | | register_domain(5, internet6) |
614 | | unregister_domain(0xffffffff895d0400, 5, internet6) |
615 | | register_domain(4, link) |
616 | | register_domain(1, internet) |
617 | | unregister_domain(0xffffffff895d0400, 4, link) |
618 | | unregister_domain(0xffffffff895d0380, 1, internet) |
619 | | package_daemon: [23927985: 62] The latest volume state is also the currently active one |
620 | | package_daemon: [23929068: 62] Volume::InitialVerify((nil), (nil)) |
621 | | package_daemon: [23945959: 62] Volume::InitialVerify(): volume at "/boot/system" is consistent |
622 | | package_daemon: [23948854: 62] Failed to open packages activation file /boot/home/config/packages/administrative/activated-packages: No such file or directory |
623 | | package_daemon: [23952566: 62] Failed to get activated packages info from activated packages file. Assuming all package files in package directory are activated. |
624 | | package_daemon: [23956285: 62] The latest volume state is also the currently active one |
625 | | package_daemon: [23957952: 62] Volume::InitialVerify(0x10cb0f711f40, (nil)) |
626 | | package_daemon: [23965023: 62] Volume::InitialVerify(): volume at "/boot/home/config" is consistent |
627 | | usb error control pipe 10: timeout waiting for queued request to complete |
628 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
629 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
630 | | usb error control pipe 11: timeout waiting for queued request to complete |
631 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
632 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
633 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_rndis |
634 | | radeon_hd: init_hardware |
635 | | usb_davicom:00.27.748:init_driver::ver.0.9.5 |
636 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_davicom |
637 | | Radeon - init_hardware: Version: 5.1.6.0 |
638 | | Radeon - Radeon_CardDetect: no supported devices found |
639 | | usb_asix:00.27.765:init_driver::ver.0.10.1 |
640 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_asix |
641 | | nvidia: CALLED init_hardware |
642 | | nvidia: init_hardware: no supported device found |
643 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/net/pegasus |
644 | | intel_extreme: CALLED status_t init_hardware() |
645 | | etherpci: init_driver init_driver: etherpci not found |
646 | | devfs: "intel_810" api_version missing |
647 | | i810: init_hardware() - no supported devices |
648 | | ati: init_hardware() - no supported devices |
649 | | vesa: init_hardware() |
650 | | vesa: init_driver() |
651 | | vesa: publish_devices() |
652 | | vesa: find_device() |
653 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/vesa |
654 | | framebuffer: init_hardware() |
655 | | VMware: init_hardware |
656 | | VMware: init_hardware: 0 |
657 | | VMware: init_driver |
658 | | VMware: init_driver: 0 |
659 | | VMware: publish_devices |
660 | | VMware: find_device (graphics/vmware) |
661 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/vmware |
662 | | VMware: OpenHook (graphics/vmware, 2) |
663 | | VMware: shared area created |
664 | | VMware: index port: 53248, value port: 53249 |
665 | | VMware: SVGA_REG_ID OK |
666 | | VMware: max resolution: 4096x4096 |
667 | | VMware: frame buffer: 0x00000000e0000000, size 67108864 |
668 | | VMware: fifo: 0x00000000f0000000, size 2097152 |
669 | | VMware: capabilities: |
670 | | VMware: RECT_COPY |
671 | | VMware: CURSOR |
672 | | VMware: CURSOR_BYPASS |
673 | | VMware: CURSOR_BYPASS_2 |
674 | | VMware: ALPHA_CURSOR |
675 | | VMware: EXTENDED_FIFO |
676 | | VMware: frame buffer mapped: 0x00000000e0000000->0xffffffff8c000000, area 6788, size 67108864, write combined: 1 |
677 | | VMware: fifo mapped: 0x00000000f0000000->0xffffffff81e00000, area 6789, size 2097152 |
678 | | VMware: OpenHook: 0 |
679 | | VMware: INIT_ACCELERANT (3) |
680 | | VMware: INIT_ACCELERANT: 0 |
681 | | VMware: SET_DISPLAY_MODE |
682 | | pci_reserve_device(0, 8, 0, ipro1000) |
683 | | VMware: PROPOSE_DISPLAY_MODE |
684 | | VMware: setting 800x600x32 |
685 | | VMware: fifo capabilities: |
686 | | VMware: FENCE |
687 | | VMware: PITCHLOCK |
688 | | VMware: init fifo: 1164 -> 2097152 |
689 | | VMware: GET_FRAME_BUFFER_CONFIG |
690 | | VMware: fb: 0xffffffff8c000000, fb_dma: 0xe0000000, row: 3200 bytes |
691 | | pci_reserve_device(0, 17, 0, ipro1000) |
692 | | if_initname(0xffffffff893b0000, em, 2) |
693 | | [ipro1000] ipro1000: /dev/net/ipro1000/0 |
694 | | [ipro1000] (em) attach_pre capping queues at 1 |
695 | | [ipro1000] (em) bus_alloc_resource(3, [16], 0x0, 0xffffffffffffffff, 0x1,0x2) |
696 | | [ipro1000] (em) bus_alloc_resource(4, [24], 0x0, 0xffffffffffffffff, 0x1,0x2) |
697 | | register_domain(9, unix) |
698 | | register_domain(5, internet6) |
699 | | register_domain(1, internet) |
700 | | unregister_domain(0xffffffff89d88400, 9, unix) |
701 | | unregister_domain(0xffffffff89d88300, 1, internet) |
702 | | unregister_domain(0xffffffff89d88380, 5, internet6) |
703 | | register_domain(5, internet6) |
704 | | unregister_domain(0xffffffff89d88300, 5, internet6) |
705 | | register_domain(1, internet) |
706 | | unregister_domain(0xffffffff89d88300, 1, internet) |
707 | | register_domain(9, unix) |
708 | | register_domain(5, internet6) |
709 | | register_domain(1, internet) |
710 | | unregister_domain(0xffffffff89d88400, 9, unix) |
711 | | unregister_domain(0xffffffff89d88000, 1, internet) |
712 | | unregister_domain(0xffffffff89d88480, 5, internet6) |
713 | | register_domain(5, internet6) |
714 | | unregister_domain(0xffffffff89d88000, 5, internet6) |
715 | | register_domain(1, internet) |
716 | | unregister_domain(0xffffffff89d88000, 1, internet) |
717 | | [ipro1000] (em) Using 1024 TX descriptors and 1024 RX descriptors |
718 | | slab memory manager: created area 0xffffffff8a801000 (7341) |
719 | | [ipro1000] (em) allocated for 1 tx_queues |
720 | | [ipro1000] (em) allocated for 1 rx_queues |
721 | | [ipro1000] (em) bus_alloc_resource(1, [0], 0x0, 0xffffffffffffffff, 0x1,0x6) |
722 | | if_attach 0xffffffff89db3af0 |
723 | | ipro1000: init_driver(0xffffffff81923210) |
724 | | if_initname(0xffffffff89a99000, em, 4) |
725 | | [ipro1000] ipro1000: /dev/net/ipro1000/1 |
726 | | [ipro1000] (em) attach_pre capping queues at 1 |
727 | | [ipro1000] (em) bus_alloc_resource(3, [16], 0x0, 0xffffffffffffffff, 0x1,0x2) |
728 | | [ipro1000] (em) bus_alloc_resource(4, [24], 0x0, 0xffffffffffffffff, 0x1,0x2) |
729 | | [ipro1000] (em) Using 1024 TX descriptors and 1024 RX descriptors |
730 | | [ipro1000] (em) allocated for 1 tx_queues |
731 | | [ipro1000] (em) allocated for 1 rx_queues |
732 | | [ipro1000] (em) bus_alloc_resource(1, [0], 0x0, 0xffffffffffffffff, 0x1,0x6) |
733 | | if_attach 0xffffffff89db38f0 |
734 | | ipro1000: init_driver(0xffffffff81923210) |
735 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/net/ipro1000 |
736 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/input/wacom |
737 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/input/usb_hid |
738 | | ps2_hid: init_hardware |
739 | | ps2_hid: init_driver |
740 | | ps2_hid: publish_devices |
741 | | ps2_hid: uninit_driver |
742 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/input/ps2_hid |
743 | | ALPS not supported: 10 00 64 |
744 | | ps2: probe_mouse Extended PS/2 mouse found |
745 | | ps2: devfs_publish_device input/mouse/ps2/intelli_0, status = 0x00000000 |
746 | | ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000 |
747 | | usb hub 2: port 0: new device connected |
748 | | register_domain(9, unix) |
749 | | register_domain(5, internet6) |
750 | | register_domain(1, internet) |
751 | | unregister_domain(0xffffffff8a13cb00, 9, unix) |
752 | | unregister_domain(0xffffffff8a13ca00, 1, internet) |
753 | | unregister_domain(0xffffffff8a13ca80, 5, internet6) |
754 | | register_domain(5, internet6) |
755 | | unregister_domain(0xffffffff8a13ca00, 5, internet6) |
756 | | register_domain(1, internet) |
757 | | unregister_domain(0xffffffff8a13ca00, 1, internet) |
758 | | register_domain(9, unix) |
759 | | register_domain(5, internet6) |
760 | | register_domain(1, internet) |
761 | | unregister_domain(0xffffffff8a13ca80, 9, unix) |
762 | | unregister_domain(0xffffffff895d0c80, 1, internet) |
763 | | unregister_domain(0xffffffff8a13cb00, 5, internet6) |
764 | | register_domain(5, internet6) |
765 | | unregister_domain(0xffffffff895d0c80, 5, internet6) |
766 | | register_domain(1, internet) |
767 | | [net/ipro1000/0] compat_open(0x2) |
768 | | ps2: keyboard found |
769 | | AddOnManager::_RegisterAddOn(): InitCheck() in "/boot/system/add-ons/input_server/filters/vmware_mouse" returned General system error |
770 | | thread 145 tried to delete kernel semaphore 0. |
771 | | /dev/net/ipro1000/0: link down, media 0x20 quality 1000 speed 0 |
772 | | register_domain(5, internet6) |
773 | | usb error control pipe 12: timeout waiting for queued request to complete |
774 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
775 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
776 | | usb error control pipe 13: timeout waiting for queued request to complete |
777 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
778 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
779 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/bus/usb_raw |
780 | | [net/ipro1000/1] compat_open(0x2) |
781 | | sis7018:init_hardware:ver:2.0.2 |
782 | | loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/usb_audio |
783 | | emuxki: init_hardware() |
784 | | echo3g: init_hardware() |
785 | | echo3g: no card found |
786 | | auvia: init_hardware() |
787 | | auich: init_hardware() |
788 | | /dev/net/ipro1000/1: link down, media 0x20 quality 1000 speed 0 |
789 | | usb hub 2: port 0: new device connected |
790 | | [ipro1000] (em) Link is up 1000 Mbps Full Duplex |
791 | | /dev/net/ipro1000/1: link up, media 0x900030 quality 1000 speed 1000000000 |
792 | | register_domain(4, link) |
793 | | slab memory manager: created area 0xffffffff8b001000 (8279) |
794 | | usb error control pipe 14: timeout waiting for queued request to complete |
795 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
796 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
797 | | register_domain(9, unix) |
798 | | usb error control pipe 15: timeout waiting for queued request to complete |
799 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
800 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
801 | | usb hub 2: port 0: new device connected |
802 | | usb error control pipe 16: timeout waiting for queued request to complete |
803 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
804 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
805 | | usb error control pipe 17: timeout waiting for queued request to complete |
806 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
807 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
808 | | usb hub 2: port 0: new device connected |
809 | | usb error control pipe 18: timeout waiting for queued request to complete |
810 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
811 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
812 | | usb error control pipe 19: timeout waiting for queued request to complete |
813 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
814 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
815 | | usb hub 2: port 0: new device connected |
816 | | usb error control pipe 20: timeout waiting for queued request to complete |
817 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
818 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
819 | | usb error control pipe 21: timeout waiting for queued request to complete |
820 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
821 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
822 | | usb hub 2: port 0: new device connected |
823 | | usb error control pipe 22: timeout waiting for queued request to complete |
824 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
825 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
826 | | usb error control pipe 23: timeout waiting for queued request to complete |
827 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
828 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
829 | | usb hub 2: port 0: new device connected |
830 | | usb error control pipe 24: timeout waiting for queued request to complete |
831 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
832 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
833 | | usb error control pipe 25: timeout waiting for queued request to complete |
834 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
835 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
836 | | usb hub 2: port 0: new device connected |
837 | | usb error control pipe 26: timeout waiting for queued request to complete |
838 | | usb error xhci 0: TRB 0x598020 was not found in the endpoint! |
839 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
840 | | usb error control pipe 27: timeout waiting for queued request to complete |
841 | | usb error xhci 0: TRB 0xa37020 was not found in the endpoint! |
842 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
843 | | usb hub 2: port 0: new device connected |
844 | | usb error control pipe 28: timeout waiting for queued request to complete |
845 | | usb error xhci 0: TRB 0xa37020 was not found in the endpoint! |
846 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
847 | | usb error control pipe 29: timeout waiting for queued request to complete |
848 | | usb error xhci 0: TRB 0xa39020 was not found in the endpoint! |
849 | | usb error xhci 0: failed to get the device descriptor: Operation timed out |
850 | | usb hub 2: port 0: new device connected |