Opened 12 years ago
Closed 6 years ago
#9204 closed bug (invalid)
Asus EEE PC 901 Wi-Fi ralink2860 - invalid MAC address
Reported by: | libran | Owned by: | nobody |
---|---|---|---|
Priority: | normal | Milestone: | R1 |
Component: | Drivers/Network/ralink2860 | Version: | R1/alpha4.1 |
Keywords: | Cc: | ||
Blocked By: | Blocking: | ||
Platform: | All |
Description
Hello, sorry for the automatic translation. On my netbook Asus EEE PC 901 set Haiku Release 1 Alpha 4.1 I had a problem with the connection Wi-Fi (Ralink RT2860).
Wireless connection says: "no wireles network found"
In the console, no networks:
ifconfig / dev/net/ralink2860/0 scan ~>
It has been observed that the MAC address of Haiku Release 1 Alpha 4.1(4.0) incorrectly identifies:
Welcome to the Haiku shell. ~> Ifconfig / Dev/net/ralink2860/0 Hardware type: Ethernet, Address: 00:0 c: 43:30:52:88 inet addr:, Bcast:, Mask: inet6 addr: fe80 :: 20c: 43ff: fe30: 5288, Bcast: ffff: ffff: ffff: ffff ::, Prefix Length: 64 MTU: 1500, Metric: 0, up broadcast configuring Receive: 0 packets, 0 errors, 0 bytes, 0 mcasts, 0 dropped Transmit: 2 packets, 4 errors, 614 bytes, 0 mcasts, 0 dropped Collisions: 0
I suggested to replace the driver ralink2860 version of Haiku Release 1 Alpha 3.
After replacement, AP became seen, but without names:
Welcome to the Haiku shell. ~> Ifconfig / dev/net/ralink2860/0 scan name address signal auth 18: b0: ee: ac: d1: 0c 9 - 18: b0: ee: ac: d2: 0c 8 - ae: c5: a7: c2: 42:0 c 7 - 18: b0: ee: ac: d0: 0c 7 - 19: e1: 00:38: e0: 0c 7 - 19: e1: 00:38: e1: 0c 8 - 19: e1: 00:38: e2: 0c 7 - c0: 49: da: f0: a5: 0d 38 - 1f: c6: 44:2 f: 42:0 c 8 - e6: ba: 9e: 11: e0: 0c 5 - 19: cb: 8d: 72: dd: 0c 16 - 7d: 68:3 e: 10: dc: 0c 7 - c0: 91:12: ad: bb: 0c 9 - 26:18: ec: ab: c4: 0c 7 - 18: b0: ee: cf: 40:0 c 8 - 18: b0: ee: cf: 41:0 c 6 - 18: b0: ee: cf: 42:0 c 7 - 60:00: e6: 08:98:0 c 9 - 19: e3: e3: 63:9 d: 0c 7 -
When you try to connect to any AP without a name, a window pops up:
"Could not join wireless network: Invalid Argument"
Driver version of Haiku Release 1 Alpha 3 MAC address identifies the correct:
~> Ifconfig / Dev/net/ralink2860/0 Hardware type: Ethernet, Address: 00:22:43:00:1 a: 2f inet addr:, Bcast:, Mask: inet6 addr: fe80 :: 222:43 ff: fe00: 1a2f, Bcast: ffff: ffff: ffff: ffff ::, Prefix Length: 64 MTU: 1500, Metric: 0, up broadcast configuring Receive: 104 packets, 0 errors, 14388 bytes, 0 mcasts, 0 dropped Transmit: 4 packets, 0 errors, 1240 bytes, 0 mcasts, 0 dropped Collisions: 0
I made a post on this forum: http://www.haiku-os.org/community/forum/asus_eee_pc_901_wifi_ralink2860_haiku_release_1_alpha_41_invalid_mac_address
and I am helped.
Change History (9)
comment:1 by , 12 years ago
Component: | - General → Drivers/Network/ralink2860 |
---|
follow-up: 3 comment:2 by , 12 years ago
follow-up: 4 comment:3 by , 12 years ago
comment:4 by , 12 years ago
Replying to libran:
Replying to korli:
Could you please check with hrev45145 or newer?
Please explain in detail how to test it?
Depends on how it's currently installed (partition, usb key...)
- Download the nightly image
- Mount the image
- Replace the driver ralinkwifi located in /boot/system/add-ons/kernel/drivers/bin/ with the one from /yourImage/system/add-ons/kernel/drivers/bin/ralinkwifi
- Reboot
comment:5 by , 12 years ago
I tried a version of the haiku-nightly-hrev45148-x86gcc2hybrid-anyboot
The result is:
Netbook Wi-Fi card can not connect to my access point, if set encryption (WEP or WPA-PSK)
Connected only in Open System.
Haiku A4.1 + driver ralink2860 by Diver, Wi-Fi card is connected OK to the WPA-PSK mode.
follow-up: 7 comment:6 by , 12 years ago
korli, maybe wpa_supplicant add-on should also be recompiled?
comment:7 by , 12 years ago
Replying to diver:
korli, maybe wpa_supplicant add-on should also be recompiled?
Possibly, though the compat layer headers haven't changed much. BTW there are newer versions of wpa_supplicant (1.0 et 2.0).
comment:8 by , 9 years ago
I can confirm that I have the same issue
RT2860 WiFi - Works (sort of) with open networks - but when I try to connect to my home network which is WPA2 / TKIP, the connection process takes a very long time, and when the interface finally reports that it is ready, it has a "link-local" 169.x.x.x address and I can't use it.
This is on an Asus EEEPC 901
Everything works well except USB3 and WiFi (when using Encryption)
comment:9 by , 6 years ago
Resolution: | → invalid |
---|---|
Status: | new → closed |
ralink2860 driver has been removed; its functionality is now provided by ralinkwifi.
Could you please check with hrev45145 or newer?