Opened 9 years ago

Closed 6 years ago

#9392 closed bug (no change required)


Reported by: Morbid Owned by: marcusoverhagen
Priority: normal Milestone: R1
Component: Drivers/Disk Version: R1/alpha4.1
Keywords: Cc: Jens.Arm@…
Blocked By: Blocking:
Platform: x86


PC is setup in plain SATA and AHCI. Harddrive Samsung SSD 830 256GiB. KDL after 4th Icon on Startup: Panic AHCI: SCSI_OP_REQUEST_SENSE not yet supported. (No Log available)

Attachments (5)

KDL_on_Screen_manually.txt (1.4 KB ) - added by Morbid 9 years ago.
Linux_HD_Info.txt (2.7 KB ) - added by Morbid 9 years ago.
Infrarecorder_Dev_Info.jpg (59.8 KB ) - added by Morbid 9 years ago.
WindowsSystemInfos.jpg (147.8 KB ) - added by Morbid 9 years ago.
Boot_with_Haiku_LIVE_CD.txt (1.0 KB ) - added by Morbid 8 years ago.

Download all attachments as: .zip

Change History (20)

comment:1 by diver, 9 years ago

Component: DriversDrivers/Disk
Owner: changed from nobody to marcusoverhagen

comment:2 by jahaiku, 9 years ago

Cc: Jens.Arm@… added

comment:3 by axeld, 9 years ago

Can you please attach a back trace of the panic? I'm interested in why this happens; the command is not usually issued for hard drives.

I have a Samsung SSD 830 128 GiB here that works just fine, btw.

comment:4 by Morbid, 9 years ago

Need to type it manually. Checked it two times and hopefully no writing errors. Motherboard is a BIOSTAR GF8100 M2+ TE with AMD Athlon 64 x2 and 4GiB RAM. DVD-ROM is from LG. No Problems under Windows7 and VectorLinux.

by Morbid, 9 years ago

Attachment: KDL_on_Screen_manually.txt added

by Morbid, 9 years ago

Attachment: Linux_HD_Info.txt added

comment:5 by Morbid, 9 years ago

For what Device is this command normal usually?

comment:6 by axeld, 9 years ago

Usually only for CD/DVD-ROMs. Unfortunately the stack trace didn't help, as it's only from a helper thread -- don't you own a camera for this? I feel guilty having wasted some time from you now :-)

comment:7 by Morbid, 9 years ago

Haiku is not wasting, it's my future OS!!! I've a Camera but the result was very bad! Will remove the DVD-Drive from the SATA and try to boot via USB! We'll see what's going to happen!

comment:8 by Morbid, 9 years ago

Ok! Thanks for the Tip! After i remove SATA from the DVD-ROM it boots up without problems. What going to happen with the DVD-Drive. Is it defect? The drive works fine with Windows/Linux!

comment:9 by axeld, 9 years ago

Interesting. Apparently, the AHCI driver is not recognizing the drive as CD-ROM, but the upper layers are, not sure how this is possible, but it's definitely an interesting issue :-)

What drive/model is the DVD-ROM?

comment:10 by Morbid, 9 years ago

It is from LG manufactured in June 2008. Super Multi DVD-Rewriter Model: GH20 NS15 ROM Ver.: IL00 S/N: 806LATT164633

supports SecurDisc

Last edited 8 years ago by Morbid (previous) (diff)

by Morbid, 9 years ago

Attachment: Infrarecorder_Dev_Info.jpg added

by Morbid, 9 years ago

Attachment: WindowsSystemInfos.jpg added

comment:11 by Morbid, 8 years ago

Also discovered that there's no Country-Code set. Possible important?

comment:12 by Morbid, 8 years ago

Characteristics at boot: (Boot up Haiku via Hama USB 2.0 Card Reader 35 in 1 with SD 2Gib) At 4th Icon the LED of CD/DVD-Writer is blinking and after init it stops blinking, try to switch back to Card-Reader and the LED of the Reader permanently glow. After a few seconds the KDL apears as written above.

Version 0, edited 8 years ago by Morbid (next)

comment:13 by Morbid, 8 years ago

Trying to boot via Card-Reader with latest hrev45222 (anyboot) with the same characteristics as above. Trying to boot with Haiku-Live-CD hrev45222 (anyboot) leads me to another KDL see below. (again manually) THE BELOW KDL MUST BE ANOTHER PROBLEM!!! hrev25226 boot up with USB-Stick -> Same characteristics as above. On removing SATA from CD/DVD-Writer, Haiku boot without any errors.

Last edited 8 years ago by Morbid (previous) (diff)

by Morbid, 8 years ago

Attachment: Boot_with_Haiku_LIVE_CD.txt added

comment:14 by Morbid, 6 years ago

Looks like defective Graphic-Card destroys on Board-Chip of the Mainboard. Chip heats up and error occures. Sometimes under Windows the time/date-settings changes after wake up of suspend mode. Also system halt on restart at bootscreen. Graphic-Card and Mainboard are scrapped. Ticket could be closed. Thx

comment:15 by pulkomandy, 6 years ago

Resolution: no change required
Status: newclosed
Note: See TracTickets for help on using tickets.