This page tries to list all the legal and technical implications of distributing the different WiFi firmwares for use on Haiku.
While a nice source of info, it is not intended as a user install guide but for Haiku developers and contributors to bring WiFi on Haiku while fully complying to the various vendor licenses and copyrights.

General

Should we ask vendors for agreements when necessary? (cf. ​Old OSNews Article) todo: find the contact points

Progress on getting Intel contact points:

• 09/12/05 umccullough: bosii, i just emailed freebsd's "Vendor relations" group to inquire about Intel contacts.
• 09/12/15 umccullough: bosii, i never heard back from the freebsd guys, so I'll probably try to contact intel directly next

Intel

Official Downloads: ​http://www.intellinuxwireless.org/?n=downloads&f=ucodes_3945
Official License FAQ: ​http://www.intellinuxwireless.org/?n=FAQ&s=license

Recommended firmware versions

This Versions are the minimal required ones. So higher Versions could work, too. These minimal versions are taken from the FreeBSD 8 Makefiles (see links).
2100 -> 1.3 ​http://svn.freebsd.org/viewvc/base/release/8.0.0/sys/modules/ipwfw/ipw_bss/Makefile?revision=199625&view=markup
2200/2945 -> 3.0 ​http://svn.freebsd.org/viewvc/base/release/8.0.0/sys/modules/iwifw/iwi_bss/Makefile?revision=199625&view=markup
3945 -> 2.14.4 ​http://svn.freebsd.org/viewvc/base/release/8.0.0/sys/modules/wpifw/Makefile?revision=199625&view=markup
4965 -> 4.44.17 ​http://svn.freebsd.org/viewvc/base/release/8.0.0/sys/modules/iwnfw/Makefile?revision=199625&view=markup

ipw3945

2.14.4 Download: ​http://www.intellinuxwireless.org/iwlwifi/downloads/iwlwifi-3945-ucode-2.14.4.tgz
2.14.4 Licence: ​http://www.intellinuxwireless.org/tar.php?p=iwlwifi&f=LICENSE.iwlwifi-3945-ucode&a=iwlwifi-3945-ucode-2.14.4.tgz
2.14.4 Readme: ​http://www.intellinuxwireless.org/tar.php?p=iwlwifi&f=README.iwlwifi-3945-ucode&a=iwlwifi-3945-ucode-2.14.4.tgz

-> Distribution method: seems possible with the image.

ipw4965

4.44.17 Download ​http://www.intellinuxwireless.org/iwlwifi/downloads/iwlwifi-4965-ucode-4.44.17.tgz
4.44.17 Licence ​http://www.intellinuxwireless.org/tar.php?p=iwlwifi&f=README.iwlwifi-4965-ucode&a=iwlwifi-4965-ucode-4.44.17.tgz
4.44.17 Readme ​http://www.intellinuxwireless.org/tar.php?p=iwlwifi&f=LICENSE.iwlwifi-4965-ucode&a=iwlwifi-4965-ucode-4.44.17.tgz

-> Distribution method:

ipw2100

License & Download: ​http://ipw2100.sourceforge.net/firmware.php?fid=4
The download link is at the bottom, in "I Agree"

-> Distribution method: Distribution method: ipw2xxx firmware ships with Haiku, but gets only installed when user had chance to read license. And then we can argue about how this chance should look like... ? matt: suggests distributing original archive & attached script. to remove all need for an active network connection: the script can have the license embedded, which is then cat'd to a temporary file when the user wants to view the license.

ipw2200/2945

License: ​http://www.intellinuxwireless.org/LICENSE.ipw2200-fw
License & Download: ​http://ipw2200.sourceforge.net/firmware.php?fid=7
The download link is at the bottom, in "I Agree"

-> Distribution method: the same as ipw2100

References: ​http://www.intellinuxwireless.org/?n=Info
​http://www.freebsd.org/cgi/man.cgi?query=iwi&apropos=0&sektion=0&manpath=FreeBSD+8.0-RELEASE&format=html

Broadcom

Recommended firmware versions

The FreeBSD 8 driver only supports firmwares of version 3 (see link below). There is only one version 3 firmware available.

• b43xx -> ​3.130.20.0 ​http://fxr.watson.org/fxr/source/dev/bwi/if_bwi.c?v=FREEBSD8#L382 (BWI_FW_VERSION3)
  

b43xx

• ​http://linuxwireless.org/en/users/Drivers/b43#device_firmware
• from the above link, "Please note that the firmware from the binary drivers is Copyrighted by Broadcom Corporation and must not be redistributed." and "Because the proprietary driver containing the firmware cannot be included in the distribution, you will need a working connection to the Internet."
• A required tool, 'b43-fwcutter' is GNU GPL V2. HaikuPorts has ported ​b43-fwcutter
• One of the suggested driver downloads, ​broadcom-wl-4.80.53.0.tar.bz2 contains a file 'WHERE_FROM' with the contents "From the Linksys WRT350N v1.03.2 GPL release"
• At least some distributions explicitly request acknowledgment from the end user.

-> Distribution method: post install unmodified download + post download processing + license warning ?

Marvell

88w8335

• Requires a ​firmware, which is not publicly available, and therefor cannot be distributed with Haiku.
• The firmware files malo8335-h and malo8335-m must reside in /system/data/firmware/marvell88w8335

-> Distribution method: the same as b43xx

88w8363

• Firmware allows distribution with Haiku. Colin recommends zipping up the firmware and the respective license in a archive called marvell88w8363.zip.
• The firmware would be named as needed by the driver already -> mw88W8363fw, mwlboot.
• The archive would be stored under data/system/data/firmware/ in the repository.
• Unzipped archive content would be put into /system/data/firmware/marvell88w8363/

-> Distribution method: with the image

Ralink Technology

RT2561, RT2561S, RT2661

• Get the firmware from the ​Ralink Technology homepage -> Software -> Linux -> Firmware RT2501(RT2561/RT2661)
• Extract the archive and rename the firmware binaries to rt2561fw, rt2561sfw and rt2661fw.
• Zip renamed firmwares and license into ralinkwifi.zip.
• Haiku's repository contains the archive in data/system/data/firmware/
• Unzipped archive content would be put into /system/data/firmware/ralinkwifi/

-> Distribution method: with the image

Firmware Distribution methods

Preparation for Mailinglist discussion

This mail is a sum up of issues arising when distributing 3rd party wifi firmware. Aldeck, mmadia, umccoullough and colin were involved in doing research and getting distribution issues sorted out.

• Firmware distribution issues are grouped as follows:
  1. Distribution possible, User *must* take notice of license
     • iprowifi2100
     • iprowifi2200
  2. Distribution possible
     • iprowifi3945
     • iprowifi4965
     • marvell88w8363
     • ralinkwifi
  3. Distribution impossible
     • broadcom43xx
     • marvel88w8335

Common license rules

• Putting license into HAIKU_TOP/data/system/data/licenses/
• Putting license in firmware directory /system/data/firmware/<driver name>/
• Adding one entry per driver to the AboutSystem

Common firmware rules

• For every firmware based driver there is
  • a separate directory in the repository in HAIKU_TOP/data/system/data/firmware/<driver-name>/.
    • This directory contains the firmware in its original bundled form (sticking to license requirements)
  • a settings file <driver-name> in HAIKU_TOP/data/settings/kernel/drivers/ will map the FreeBSD firmware name to the vendor's original firmware name.
• Firmware once installed, will reside in /system/data/firmware/<driver-name>/.
• Firmware file permissions must be set to read-only, as they are loaded directly into kernel space (having future multi-user feature in mind).

Proposed handling of group 1

• Main issue is that the license requires that end users are taking notice of the license before using the firmware.
  
• Colin and mmadia discussed the topic on distributing the firmware along with Haiku:
  • Based on the ​3 bullets we are concurring that distributing and using the firmware out of the box is feasible.
  • But installing and using it right during boot is problematic. The user *must* have a chance reading the license first.
    • For the Haiku-CD-installation scenario this could be solved be adding the license to the Haiku Installer.
    • However, when used as a Live-CD/-USB where there is no need for running the installer first, the problem continues to exist.
  • Proposed solution: Shipping the firmware inside its original bundled form with Haiku along with a script, allowing the user to install the firmware when he wants to. The installer script provides license conformance, by allowing the user to view the license prior to use. Note: Read One to rule them all section down the page.

• Though one can read the ​license in a way, that even distributing the firmware would require the user to consent to it before downloading/buying Haiku. This is why umccullough started getting in contact with Intel itself to get official distribution permission. No reaction so far. Nonetheless colin sees Haiku well prepared, for the case Intel declines, because it would be easy then to remove the firmware and modify the installer script to download the firmware.

Proposed handling of group 2

• Just stick to common license rules and every thing is fine.

Proposed handling of group 3

• Main issue is that redistribution is forbidden.
• Proposed solution:
  • Shipping a script for downloading, preparing and installing the firmware. Thus allowing the user to install the firmware when he wants to.
  • Once the firmware archives and accompanying tools are downloaded, they will be stored in the respective firmware installation folders. Thus preventing redownloading in the case of reinstalling the firmware. Reinstalling may be necessary when some sort of data corruption might render the firmware useless.

One to rule them all

• For a smooth user experience mmadia and colin are proposing a "super" script for installing firmware with a single click. It merges the scripts described for group 1 and 3.
• Advantages:
  • User doesn't need to know the difference between an Intel 2100, 2200, 2225,...
  • Reuse script code be merging 4 scripts into one
• Disadvantages:
  • You need to educate users about where to find this script.
    • Proposed solution: Adding an "Installing more driver" section to the Welcome page.