| 1 |
|
|---|
| 2 | Welcome to the Haiku shell.
|
|---|
| 3 |
|
|---|
| 4 | ~> cdrecord -scanbus
|
|---|
| 5 | Cdrecord-ProDVD-ProBD-Clone 3.02a06 (i586-pc-haiku) Copyright (C) 1995-2016 Joerg Schilling
|
|---|
| 6 | Using libscg version 'schily-0.9'.
|
|---|
| 7 | scsibus11:
|
|---|
| 8 | 11,0,0 1100) 'HL-DT-ST' 'DVD+-RW GH50N ' 'B104' Removable CD-ROM
|
|---|
| 9 | 11,1,0 1101) *
|
|---|
| 10 | 11,2,0 1102) *
|
|---|
| 11 | 11,3,0 1103) *
|
|---|
| 12 | 11,4,0 1104) *
|
|---|
| 13 | 11,5,0 1105) *
|
|---|
| 14 | 11,6,0 1106) *
|
|---|
| 15 | 11,7,0 1107) *
|
|---|
| 16 | ~> cdrecord dev=11,0,0 blank=all -v speed=4 -force -eject
|
|---|
| 17 | Cdrecord-ProDVD-ProBD-Clone 3.02a06 (i586-pc-haiku) Copyright (C) 1995-2016 Joerg Schilling
|
|---|
| 18 | TOC Type: 1 = CD-ROM
|
|---|
| 19 | cdrecord: WARNING: Cannot set priority on this OS.
|
|---|
| 20 | cdrecord: WARNING: This causes a high risk for buffer underruns.
|
|---|
| 21 | scsidev: '11,0,0'
|
|---|
| 22 | scsibus: 11 target: 0 lun: 0
|
|---|
| 23 | Using libscg version 'schily-0.9'.
|
|---|
| 24 | SCSI buffer size: 64512
|
|---|
| 25 | atapi: -1
|
|---|
| 26 | Device type : Removable CD-ROM
|
|---|
| 27 | Version : 2
|
|---|
| 28 | Response Format: 2
|
|---|
| 29 | Capabilities :
|
|---|
| 30 | Vendor_info : 'HL-DT-ST'
|
|---|
| 31 | Identifikation : 'DVD+-RW GH50N '
|
|---|
| 32 | Revision : 'B104'
|
|---|
| 33 | Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
|
|---|
| 34 | Current: CD-RW
|
|---|
| 35 | Profile: DVD-RAM
|
|---|
| 36 | Profile: DVD-R sequential recording
|
|---|
| 37 | Profile: DVD-R/DL sequential recording
|
|---|
| 38 | Profile: DVD-R/DL layer jump recording
|
|---|
| 39 | Profile: DVD-RW sequential recording
|
|---|
| 40 | Profile: DVD-RW restricted overwrite
|
|---|
| 41 | Profile: DVD+RW
|
|---|
| 42 | Profile: DVD+R
|
|---|
| 43 | Profile: DVD+R/DL
|
|---|
| 44 | Profile: DVD-ROM
|
|---|
| 45 | Profile: CD-R
|
|---|
| 46 | Profile: CD-RW (current)
|
|---|
| 47 | Profile: CD-ROM
|
|---|
| 48 | Profile: Removable Disk
|
|---|
| 49 | Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
|
|---|
| 50 | Driver flags : MMC-3 SWABAUDIO BURNFREE
|
|---|
| 51 | Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R LAYER_JUMP
|
|---|
| 52 | Drive buf size : 1053696 = 1029 KB
|
|---|
| 53 | Drive pbuf size: 1966080 = 1920 KB
|
|---|
| 54 | cdrecord: Warning: DMA resid 0 for 'read buffer', actual data is too short.
|
|---|
| 55 | cdrecord: Warning: The DMA speed test has been skipped.
|
|---|
| 56 | Current Secsize: 2048
|
|---|
| 57 | ATIP info from disk:
|
|---|
| 58 | Indicated writing power: 6
|
|---|
| 59 | Reference speed: 2
|
|---|
| 60 | Disk Is not unrestricted
|
|---|
| 61 | Disk Is erasable
|
|---|
| 62 | ATIP start of lead in: -11078 (97:34/22)
|
|---|
| 63 | ATIP start of lead out: 359849 (79:59/74)
|
|---|
| 64 | 1T speed low: 0 (reserved val 0) 1T speed high: 4
|
|---|
| 65 | 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
|
|---|
| 66 | power mult factor: 3 5
|
|---|
| 67 | recommended erase/write power: 3
|
|---|
| 68 | A1 values: 02 3A B0
|
|---|
| 69 | A2 values: 5C C6 26
|
|---|
| 70 | Disk type: Phase change
|
|---|
| 71 | Manuf. index: 11
|
|---|
| 72 | Manufacturer: Mitsubishi Chemical Corporation
|
|---|
| 73 |
|
|---|
| 74 | Capacity Blklen/Sparesz. Format-type Type
|
|---|
| 75 | 0 2048 0x00 No Media Present or Unknown Capacity
|
|---|
| 76 | Waiting for drive to calm down.
|
|---|
| 77 | Starting to write CD/DVD/BD at speed 4 in real force BLANK mode for single session.
|
|---|
| 78 | Last chance to quit, starting real write 0 seconds. Operation starts.
|
|---|
| 79 | Starting to write CD/DVD/BD at speed 4 in real force BLANK mode for single session.
|
|---|
| 80 | No chance to quit anymore. Operation starts.
|
|---|
| 81 | Performing OPC...
|
|---|
| 82 | Blanking entire disk
|
|---|
| 83 | Blanking time: 1265.126s (00:21:05.126)
|
|---|
| 84 | ~>
|
|---|
