| 1 | APM version 1.2 available, flags 3.
|
|---|
| 2 | smp_acpi_probe: entry base 0x9fc00, limit 0xa0000
|
|---|
| 3 | smp_acpi_probe: entry base 0xf0000, limit 0x100000
|
|---|
| 4 | smp_acpi_probe: found ACPI RSDP signature at 0x000f7df0
|
|---|
| 5 | smp: using ACPI to detect MP configuration
|
|---|
| 6 | smp: found rsdp at 0x000f7df0 oem id: ASUS
|
|---|
| 7 | smp: rsdp points to rsdt at 0xbffd000
|
|---|
| 8 | smp: searching 2 entries for APIC information
|
|---|
| 9 | smp: skipping uninteresting header 'FACP'
|
|---|
| 10 | smp: skipping uninteresting header 'BOOT'
|
|---|
| 11 | smp_mp_probe: entry base 0x9fc00, limit 0xa0000
|
|---|
| 12 | smp_mp_probe: entry base 0xf0000, limit 0x100000
|
|---|
| 13 | VESA version = 2.0
|
|---|
| 14 | oem string: S3 Incorporated. 86C362
|
|---|
| 15 | 109: 132 x 25 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
|
|---|
| 16 | 10a: 132 x 43 x 4 (a = 15, mem = 0, phy = 0, p = 4, b = 1)
|
|---|
| 17 | 12e: 320 x 200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 18 | 10d: 320 x 200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 19 | 10e: 320 x 200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 20 | 128: 320 x 200 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 21 | 10f: 320 x 200 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 22 | 131: 320 x 240 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 23 | 132: 320 x 240 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 24 | 133: 320 x 240 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 25 | 135: 320 x 240 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 26 | 134: 320 x 240 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 27 | 141: 400 x 300 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 28 | 142: 400 x 300 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 29 | 143: 400 x 300 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 30 | 145: 400 x 300 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 31 | 144: 400 x 300 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 32 | 151: 512 x 384 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 33 | 152: 512 x 384 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 34 | 153: 512 x 384 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 35 | 155: 512 x 384 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 36 | 154: 512 x 384 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 37 | 100: 640 x 400 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 38 | 11c: 640 x 400 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 39 | 11d: 640 x 400 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 40 | 129: 640 x 400 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 41 | 11e: 640 x 400 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 42 | 101: 640 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 43 | 110: 640 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 44 | 111: 640 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 45 | 12a: 640 x 480 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 46 | 112: 640 x 480 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 47 | 171: 720 x 480 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 48 | 172: 720 x 480 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 49 | 173: 720 x 480 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 50 | 17c: 720 x 576 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 51 | 17d: 720 x 576 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 52 | 17e: 720 x 576 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 53 | 102: 800 x 600 x 4 (a = 31, mem = 3, phy = 0, p = 4, b = 1)
|
|---|
| 54 | 103: 800 x 600 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 55 | 113: 800 x 600 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 56 | 114: 800 x 600 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 57 | 12b: 800 x 600 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 58 | 115: 800 x 600 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 59 | 104: 1024 x 768 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
|
|---|
| 60 | 105: 1024 x 768 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 61 | 116: 1024 x 768 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 62 | 117: 1024 x 768 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 63 | 12c: 1024 x 768 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 64 | 118: 1024 x 768 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 65 | 161: 1152 x 864 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 66 | 162: 1152 x 864 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 67 | 163: 1152 x 864 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 68 | 165: 1152 x 864 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 69 | 164: 1152 x 864 x 32 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 70 | 106: 1280 x 1024 x 4 (a = 27, mem = 3, phy = 0, p = 4, b = 1)
|
|---|
| 71 | 107: 1280 x 1024 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 72 | 119: 1280 x 1024 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 73 | 11a: 1280 x 1024 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 74 | 12d: 1280 x 1024 x 24 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 75 | 120: 1600 x 1200 x 8 (a = 155, mem = 4, phy = e0000000, p = 1, b = 1)
|
|---|
| 76 | 121: 1600 x 1200 x 15 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 77 | 122: 1600 x 1200 x 16 (a = 155, mem = 6, phy = e0000000, p = 1, b = 1)
|
|---|
| 78 | VESA compatible graphics!
|
|---|
| 79 | EDID1: 4f
|
|---|
| 80 | EDID2: ebx 102
|
|---|
| 81 | EDID3: 4f
|
|---|
| 82 | Got EDID!
|
|---|
| 83 | Vendor: CTX
|
|---|
| 84 | Product ID: 22164
|
|---|
| 85 | Serial #: 0
|
|---|
| 86 | Produced in week/year: 0/1997
|
|---|
| 87 | EDID version: 1.1
|
|---|
| 88 | Type: Analog
|
|---|
| 89 | Size: 28 cm x 21 cm
|
|---|
| 90 | Gamma=2.1
|
|---|
| 91 | White (X,Y)=(0.281,0.31)
|
|---|
| 92 | Supported Future Video Modes:
|
|---|
| 93 | 640x480@120Hz (id=31793)
|
|---|
| 94 | 800x600@100Hz (id=26693)
|
|---|
| 95 | 1024x768@85Hz (id=22881)
|
|---|
| 96 | 1280x1024@60Hz (id=32897)
|
|---|
| 97 | Supported VESA Video Modes:
|
|---|
| 98 | 720x400@70
|
|---|
| 99 | 640x480@60
|
|---|
| 100 | 640x480x67
|
|---|
| 101 | 640x480x72
|
|---|
| 102 | 640x480x75
|
|---|
| 103 | 800x600@60
|
|---|
| 104 | 800x600@72
|
|---|
| 105 | 800x600@75
|
|---|
| 106 | 832x624@75
|
|---|
| 107 | 1024x768@60
|
|---|
| 108 | 1024x768@70
|
|---|
| 109 | 1024x768@75
|
|---|
| 110 | 1152x870@75
|
|---|
| 111 | Additional Video Mode:
|
|---|
| 112 | clock=25.17 MHz
|
|---|
| 113 | h: (640, 656, 752, 800)
|
|---|
| 114 | v: (350, 387, 389, 449)
|
|---|
| 115 | size: 27 cm x 20.2 cm
|
|---|
| 116 | border: 0 cm x 0 cm
|
|---|
| 117 | Additional Video Mode:
|
|---|
| 118 | clock=56.25 MHz
|
|---|
| 119 | h: (800, 832, 896, 1048)
|
|---|
| 120 | v: (600, 601, 604, 631)
|
|---|
| 121 | size: 27 cm x 20.2 cm
|
|---|
| 122 | border: 0 cm x 0 cm
|
|---|
| 123 | Additional Video Mode:
|
|---|
| 124 | clock=36 MHz
|
|---|
| 125 | h: (640, 672, 720, 832)
|
|---|
| 126 | v: (480, 481, 484, 509)
|
|---|
| 127 | size: 27 cm x 20.2 cm
|
|---|
| 128 | border: 0 cm x 0 cm
|
|---|
| 129 | Additional Video Mode:
|
|---|
| 130 | clock=94.5 MHz
|
|---|
| 131 | h: (1024, 1072, 1168, 1376)
|
|---|
| 132 | v: (768, 769, 772, 808)
|
|---|
| 133 | size: 27 cm x 20.2 cm
|
|---|
| 134 | border: 0 cm x 0 cm
|
|---|
| 135 | Welcome to the Haiku boot loader!
|
|---|
| 136 | number of drives: 2
|
|---|
| 137 | add_partitions_for(0x001053b8, mountFS = no)
|
|---|
| 138 | add_partitions_for(fd = 0, mountFS = no)
|
|---|
| 139 | 0x001055c4 Partition::Partition
|
|---|
| 140 | 0x001055c4 Partition::Scan()
|
|---|
| 141 | check for partitioning_system: Amiga Partition Map
|
|---|
| 142 | check for partitioning_system: EFI GUID Partition Map
|
|---|
| 143 | check for partitioning_system: Intel Partition Map
|
|---|
| 144 | intel: pm_identify_partition(1, 1070532: 0, 4327464960, 512)
|
|---|
| 145 | Partition::SetTo(): active: 80
|
|---|
| 146 | Partition::SetTo(): active: 0
|
|---|
| 147 | Partition::SetTo(): active: 0
|
|---|
| 148 | Partition::SetTo(): active: 0
|
|---|
| 149 | priority: 810
|
|---|
| 150 | check for partitioning_system: Intel Extended Partition
|
|---|
| 151 | check for partitioning_system: Apple Partition Map
|
|---|
| 152 | intel: pm_scan_partition(1, 1070532: 0, 4327464960, 512)
|
|---|
| 153 | 0x00105718 Partition::Partition
|
|---|
| 154 | 0x001055c4 Partition::AddChild 0x00105718
|
|---|
| 155 | 0x00105718 Partition::SetParent 0x001055c4
|
|---|
| 156 | new child partition!
|
|---|
| 157 | 0x001055c4 Partition::Scan: *** scan child 0x00105718 (start = 8225280, size = 4318272000, parent = 0x001055c4)!
|
|---|
| 158 | 0x00105718 Partition::Scan()
|
|---|
| 159 | check for partitioning_system: Amiga Partition Map
|
|---|
| 160 | check for partitioning_system: EFI GUID Partition Map
|
|---|
| 161 | check for partitioning_system: Intel Partition Map
|
|---|
| 162 | intel: pm_identify_partition(2, 1070872: 8225280, 4318272000, 512)
|
|---|
| 163 | Partition::SetTo(): active: c3
|
|---|
| 164 | Partition::CheckLocation() - end after session: 2534642281984 (session: 4318272000)
|
|---|
| 165 | intel: _ParsePrimary(): partition 0: bad location, ignoring
|
|---|
| 166 | Partition::SetTo(): active: ad
|
|---|
| 167 | Partition::CheckLocation() - end after session: 1140980562944 (session: 4318272000)
|
|---|
| 168 | intel: _ParsePrimary(): partition 1: bad location, ignoring
|
|---|
| 169 | Partition::SetTo(): active: 69
|
|---|
| 170 | Partition::CheckLocation() - end after session: 1939398313472 (session: 4318272000)
|
|---|
| 171 | intel: _ParsePrimary(): partition 2: bad location, ignoring
|
|---|
| 172 | Partition::SetTo(): active: 79
|
|---|
| 173 | Partition::CheckLocation() - end after session: 1244261457408 (session: 4318272000)
|
|---|
| 174 | intel: _ParsePrimary(): partition 3: bad location, ignoring
|
|---|
| 175 | priority: 100
|
|---|
| 176 | check for partitioning_system: Intel Extended Partition
|
|---|
| 177 | intel: ep_identify_partition(2, 8225280, 4318272000, 512)
|
|---|
| 178 | check for partitioning_system: Apple Partition Map
|
|---|
| 179 | 0x001055c4 Partition::~Partition
|
|---|
| 180 | 0x00105718 Partition::SetParent 0x00000000
|
|---|
| 181 | boot partition offset: 8225280
|
|---|
| 182 | 0x00105718 Partition::_Mount check for file_system: BFS Filesystem
|
|---|
| 183 | load kernel...
|
|---|
| 184 | unhandled pheader type 0x6
|
|---|
| 185 | unhandled pheader type 0x3
|
|---|
| 186 | video mode: 1024x768x32
|
|---|
| 187 | kernel entry at 80032190
|
|---|
| 188 | Welcome to kernel debugger output!
|
|---|
| 189 | Haiku revision: 26056
|
|---|
| 190 | CPU 0: type 0 family 6 extended_family 0 model 6 extended_model 0 stepping 5, string 'GenuineIntel'
|
|---|
| 191 | CPU 0: features: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
|
|---|
| 192 | heap_attach: attached to 0x90b57000 - usable range 0x90b6c000 - 0x91b57000
|
|---|
| 193 | slab: init base 0x91b57000 + 0x2000
|
|---|
| 194 | initialize_commpage_syscall(): sysenter/sysexit supported
|
|---|
| 195 | allocate_commpage_entry(3, 5) -> 0xffff0100
|
|---|
| 196 | allocate_commpage_entry(2, 12) -> 0xffff0108
|
|---|
| 197 | apm_init()
|
|---|
| 198 | code32: 0xf000, 0x76e0, length 0x929c
|
|---|
| 199 | code16: 0xf000, length 0x4166
|
|---|
| 200 | data: 0xfdc7, length 0x7516
|
|---|
| 201 | heap_attach: attached to 0x80300000 - usable range 0x80302000 - 0x80400000
|
|---|
| 202 | Could not register image "usb_disk": Bad argument type passed to function
|
|---|
| 203 | PCI: pci_module_init
|
|---|
| 204 | PCI: mechanism 1 controller found
|
|---|
| 205 | PCI: dom 0, bus 0, dev 1, func 0, changed PCI bridge control from 0x0008 to 0x000b
|
|---|
| 206 | PCI: [dom 0, bus 0] bus 0, device 0, function 0: vendor 8086, device 7180, revision 03
|
|---|
| 207 | PCI: class_base 06, class_function 00, class_api 00
|
|---|
| 208 | PCI: vendor 8086: Intel Corporation
|
|---|
| 209 | PCI: device 7180: 440LX/EX - 82443LX/EX Host bridge
|
|---|
| 210 | PCI: info: Bridge (Host bridge)
|
|---|
| 211 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
|---|
| 212 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 213 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 214 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 215 | PCI: base reg 0: host e7800000, pci e7800000, size 00400000, flags 08
|
|---|
| 216 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 217 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 218 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 219 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 220 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 221 | PCI: Capabilities: AGP
|
|---|
| 222 | PCI: [dom 0, bus 0] bus 0, device 1, function 0: vendor 8086, device 7181, revision 03
|
|---|
| 223 | PCI: class_base 06, class_function 04, class_api 00
|
|---|
| 224 | PCI: vendor 8086: Intel Corporation
|
|---|
| 225 | PCI: device 7181: 440LX/EX - 82443LX/EX AGP bridge
|
|---|
| 226 | PCI: info: Bridge (PCI bridge, Normal decode)
|
|---|
| 227 | PCI: line_size 00, latency 40, header_type 01, BIST 00
|
|---|
| 228 | PCI: subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 229 | PCI: primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 40
|
|---|
| 230 | PCI: io_base_upper_16 0000, io_base e0
|
|---|
| 231 | PCI: io_limit_upper_16 0000, io_limit d0
|
|---|
| 232 | PCI: memory_base e000, memory_limit e760
|
|---|
| 233 | PCI: prefetchable_memory_base_upper32 00000000, prefetchable_memory_base e770
|
|---|
| 234 | PCI: prefetchable_memory_limit_upper32 00000000, prefetchable_memory_limit e770
|
|---|
| 235 | PCI: bridge_control 000b, secondary_status 02a0
|
|---|
| 236 | PCI: interrupt_line 00, interrupt_pin 00
|
|---|
| 237 | PCI: ROM base host 00000000, pci 00000000, size ??
|
|---|
| 238 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 239 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 240 | PCI: Capabilities: (not supported)
|
|---|
| 241 | PCI: [dom 0, bus 1] bus 1, device 0, function 0: vendor 5333, device 8a13, revision 02
|
|---|
| 242 | PCI: class_base 03, class_function 00, class_api 00
|
|---|
| 243 | PCI: vendor 5333: S3 Inc.
|
|---|
| 244 | PCI: device 8a13: 86c368 [Trio 3D/2X] (Trio3D/2X)
|
|---|
| 245 | PCI: info: Display controller (VGA compatible controller, VGA controller)
|
|---|
| 246 | PCI: line_size 00, latency 40, header_type 00, BIST 00
|
|---|
| 247 | PCI: ROM base host e77f0000, pci e77f0000, size 00010000
|
|---|
| 248 | PCI: cardbus_CIS 00000000, subsystem_id 8a13, subsystem_vendor_id 5333
|
|---|
| 249 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 04, max_latency ff
|
|---|
| 250 | PCI: base reg 0: host e0000000, pci e0000000, size 04000000, flags 00
|
|---|
| 251 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 252 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 253 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 254 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 255 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 256 | PCI: Capabilities: PM, AGP
|
|---|
| 257 | PCI: [dom 0, bus 0] bus 0, device 4, function 0: vendor 8086, device 7110, revision 02
|
|---|
| 258 | PCI: class_base 06, class_function 01, class_api 00
|
|---|
| 259 | PCI: vendor 8086: Intel Corporation
|
|---|
| 260 | PCI: device 7110: 82371AB/EB/MB PIIX4 ISA
|
|---|
| 261 | PCI: info: Bridge (ISA bridge)
|
|---|
| 262 | PCI: line_size 00, latency 00, header_type 80, BIST 00
|
|---|
| 263 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 264 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 265 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 266 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 267 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 268 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 269 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 270 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 271 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 272 | PCI: Capabilities: (not supported)
|
|---|
| 273 | PCI: [dom 0, bus 0] bus 0, device 4, function 1: vendor 8086, device 7111, revision 01
|
|---|
| 274 | PCI: class_base 01, class_function 01, class_api 80
|
|---|
| 275 | PCI: vendor 8086: Intel Corporation
|
|---|
| 276 | PCI: device 7111: 82371AB/EB/MB PIIX4 IDE
|
|---|
| 277 | PCI: info: Mass storage controller (IDE interface)
|
|---|
| 278 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 279 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 280 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 281 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 282 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 283 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 284 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 285 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 286 | PCI: base reg 4: host 0000d800, pci 0000d800, size 00000010, flags 01
|
|---|
| 287 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 288 | PCI: Capabilities: (not supported)
|
|---|
| 289 | PCI: [dom 0, bus 0] bus 0, device 4, function 2: vendor 8086, device 7112, revision 01
|
|---|
| 290 | PCI: class_base 0c, class_function 03, class_api 00
|
|---|
| 291 | PCI: vendor 8086: Intel Corporation
|
|---|
| 292 | PCI: device 7112: 82371AB/EB/MB PIIX4 USB
|
|---|
| 293 | PCI: info: Serial bus controller (USB Controller, UHCI)
|
|---|
| 294 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 295 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 296 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 297 | PCI: interrupt_line 0a, interrupt_pin 04, min_grant 00, max_latency 00
|
|---|
| 298 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 299 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 300 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 301 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 302 | PCI: base reg 4: host 0000d400, pci 0000d400, size 00000020, flags 01
|
|---|
| 303 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 304 | PCI: Capabilities: (not supported)
|
|---|
| 305 | PCI: [dom 0, bus 0] bus 0, device 4, function 3: vendor 8086, device 7113, revision 02
|
|---|
| 306 | PCI: class_base 06, class_function 80, class_api 00
|
|---|
| 307 | PCI: vendor 8086: Intel Corporation
|
|---|
| 308 | PCI: device 7113: 82371AB/EB/MB PIIX4 ACPI
|
|---|
| 309 | PCI: info: Bridge
|
|---|
| 310 | PCI: line_size 00, latency 00, header_type 00, BIST 00
|
|---|
| 311 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 312 | PCI: cardbus_CIS 00000000, subsystem_id 0000, subsystem_vendor_id 0000
|
|---|
| 313 | PCI: interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
|
|---|
| 314 | PCI: base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 315 | PCI: base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 316 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 317 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 318 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 319 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 320 | PCI: Capabilities: (not supported)
|
|---|
| 321 | PCI: [dom 0, bus 0] bus 0, device 10, function 0: vendor 10ec, device 8139, revision 10
|
|---|
| 322 | PCI: class_base 02, class_function 00, class_api 00
|
|---|
| 323 | PCI: vendor 10ec: Realtek Semiconductor Co., Ltd.
|
|---|
| 324 | PCI: device 8139: RTL-8139/8139C/8139C+ (RT8139)
|
|---|
| 325 | PCI: info: Network controller (Ethernet controller)
|
|---|
| 326 | PCI: line_size 00, latency 20, header_type 00, BIST 00
|
|---|
| 327 | PCI: ROM base host 00000000, pci 00000000, size 00000000
|
|---|
| 328 | PCI: cardbus_CIS 00000000, subsystem_id 8139, subsystem_vendor_id 10ec
|
|---|
| 329 | PCI: interrupt_line 0b, interrupt_pin 01, min_grant 20, max_latency 40
|
|---|
| 330 | PCI: base reg 0: host 0000d000, pci 0000d000, size 00000100, flags 01
|
|---|
| 331 | PCI: base reg 1: host df800000, pci df800000, size 00000100, flags 00
|
|---|
| 332 | PCI: base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 333 | PCI: base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 334 | PCI: base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 335 | PCI: base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
|
|---|
| 336 | PCI: Capabilities: PM
|
|---|
| 337 | usb_uhci: successfully started the controller
|
|---|
| 338 | usb_ohci: no devices found
|
|---|
| 339 | usb_ehci: no devices found
|
|---|
| 340 | usb_disk: device reports a lun count of 4
|
|---|
| 341 | usb_disk: vendor_identification "Generic "
|
|---|
| 342 | usb_disk: product_identification "USB SD Reader "
|
|---|
| 343 | usb_disk: product_revision_level "1.00"
|
|---|
| 344 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 345 | usb_disk: vendor_identification "Generic "
|
|---|
| 346 | usb_disk: product_identification "USB CF Reader "
|
|---|
| 347 | usb_disk: product_revision_level "1.01"
|
|---|
| 348 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 349 | usb_disk: vendor_identification "Generic "
|
|---|
| 350 | usb_disk: product_identification "USB SM Reader "
|
|---|
| 351 | usb_disk: product_revision_level "1.02"
|
|---|
| 352 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 353 | usb_disk: vendor_identification "Generic "
|
|---|
| 354 | usb_disk: product_identification "USB MS Reader "
|
|---|
| 355 | usb_disk: product_revision_level "1.03"
|
|---|
| 356 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 357 | get_boot_partitions(): boot volume message:
|
|---|
| 358 | field: "booted from image", type: BOOL (0x424f4f4c):
|
|---|
| 359 | [ 0] false
|
|---|
| 360 | field: "partition offset", type: LLNG (0x4c4c4e47):
|
|---|
| 361 | [ 0] 8225280 (0x7d8200)
|
|---|
| 362 | field: "boot method", type: LONG (0x4c4f4e47):
|
|---|
| 363 | [ 0] 0 (0x0)
|
|---|
| 364 | field: "boot drive number", type: LLNG (0x4c4c4e47):
|
|---|
| 365 | [ 0] 128 (0x80)
|
|---|
| 366 | field: "disk identifier", type: RAWT (0x52415754):
|
|---|
| 367 | [ 0] data: "0x8070d678", 80 bytes
|
|---|
| 368 | get_boot_partitions(): boot method type: 0
|
|---|
| 369 | partitioning system: partitioning_systems/intel/extended/v1
|
|---|
| 370 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/extended/v1)
|
|---|
| 371 | KDiskSystem::Load(): partitioning_systems/intel/extended/v1 -> 1
|
|---|
| 372 | intel: ep_std_ops(0x1)
|
|---|
| 373 | KDiskSystem::Unload(): partitioning_systems/intel/extended/v1 -> 0
|
|---|
| 374 | intel: ep_std_ops(0x2)
|
|---|
| 375 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 376 | partitioning system: partitioning_systems/intel/map/v1
|
|---|
| 377 | KDiskDeviceManager::_AddDiskSystem(partitioning_systems/intel/map/v1)
|
|---|
| 378 | KDiskSystem::Load(): partitioning_systems/intel/map/v1 -> 1
|
|---|
| 379 | intel: pm_std_ops(0x1)
|
|---|
| 380 | KDiskSystem::Unload(): partitioning_systems/intel/map/v1 -> 0
|
|---|
| 381 | intel: pm_std_ops(0x2)
|
|---|
| 382 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 383 | file system: file_systems/bfs/v1
|
|---|
| 384 | KDiskDeviceManager::_AddDiskSystem(file_systems/bfs/v1)
|
|---|
| 385 | KDiskSystem::Load(): file_systems/bfs/v1 -> 1
|
|---|
| 386 | KDiskSystem::Unload(): file_systems/bfs/v1 -> 0
|
|---|
| 387 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 388 | file system: file_systems/devfs/v1
|
|---|
| 389 | KDiskDeviceManager::_AddDiskSystem(file_systems/devfs/v1)
|
|---|
| 390 | KDiskSystem::Load(): file_systems/devfs/v1 -> 1
|
|---|
| 391 | KDiskSystem::Unload(): file_systems/devfs/v1 -> 0
|
|---|
| 392 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 393 | file system: file_systems/rootfs/v1
|
|---|
| 394 | KDiskDeviceManager::_AddDiskSystem(file_systems/rootfs/v1)
|
|---|
| 395 | KDiskSystem::Load(): file_systems/rootfs/v1 -> 1
|
|---|
| 396 | KDiskSystem::Unload(): file_systems/rootfs/v1 -> 0
|
|---|
| 397 | KDiskDeviceManager::_AddDiskSystem() done: No error
|
|---|
| 398 | number of disk systems: 5
|
|---|
| 399 | KDiskDeviceManager::_Scan(/dev/disk)
|
|---|
| 400 | PCI-IDE: Controller in legacy mode: cmd 0x1f0, ctrl 0x3f6, irq 14
|
|---|
| 401 | PCI-IDE: init channel...
|
|---|
| 402 | PCI-IDE: channel index 0
|
|---|
| 403 | PCI-IDE: bus master base 0xd800
|
|---|
| 404 | PCI-IDE: init channel done
|
|---|
| 405 | IDE: scan_device_worker: bus 0x90c0e100, device-number 0
|
|---|
| 406 | IDE: create_device: bus 0x90c0e100, device-number 0
|
|---|
| 407 | IDE: setup_device_links: bus 0x90c0e100, device 0x90bc7c00
|
|---|
| 408 | IDE: scan_device_int: device 0x90bc7c00, atapi 0
|
|---|
| 409 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 410 | IDE: scan_device_int: got a fast response
|
|---|
| 411 | IDE: scan_device_int: error bit set - no device or wrong type (status: 0x01)
|
|---|
| 412 | IDE: scan_device_int: device 0x90bc7c00, atapi 1
|
|---|
| 413 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 414 | IDE: scan_device_int: got a fast response
|
|---|
| 415 | IDE: scan_device_int: device found
|
|---|
| 416 | IDE: scan_device_worker: bus 0x90c0e100, device-number 1
|
|---|
| 417 | IDE: create_device: bus 0x90c0e100, device-number 1
|
|---|
| 418 | IDE: setup_device_links: bus 0x90c0e100, device 0x90c18000
|
|---|
| 419 | IDE: scan_device_int: device 0x90c18000, atapi 0
|
|---|
| 420 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 421 | IDE: scan_device_int: got a fast response
|
|---|
| 422 | IDE: scan_device_int: device found
|
|---|
| 423 | IDE: scan_device_worker: bus 0x90c0e100, device-number 0
|
|---|
| 424 | IDE: destroy_device: device 0x90bc7c00
|
|---|
| 425 | IDE: cleanup_device_links: device 0x90bc7c00
|
|---|
| 426 | IDE: create_device: bus 0x90c0e100, device-number 0
|
|---|
| 427 | IDE: setup_device_links: bus 0x90c0e100, device 0x90bc7c00
|
|---|
| 428 | IDE: scan_device_int: device 0x90bc7c00, atapi 0
|
|---|
| 429 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 430 | IDE: scan_device_int: got a fast response
|
|---|
| 431 | IDE: scan_device_int: error bit set - no device or wrong type (status: 0x01)
|
|---|
| 432 | IDE: scan_device_int: device 0x90bc7c00, atapi 1
|
|---|
| 433 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 434 | IDE: scan_device_int: got a fast response
|
|---|
| 435 | IDE: scan_device_int: device found
|
|---|
| 436 | IDE: scan_device_worker: bus 0x90c0e100, device-number 1
|
|---|
| 437 | IDE: destroy_device: device 0x90c18000
|
|---|
| 438 | IDE: cleanup_device_links: device 0x90c18000
|
|---|
| 439 | IDE: create_device: bus 0x90c0e100, device-number 1
|
|---|
| 440 | IDE: setup_device_links: bus 0x90c0e100, device 0x90c18000
|
|---|
| 441 | IDE: scan_device_int: device 0x90c18000, atapi 0
|
|---|
| 442 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 443 | IDE: scan_device_int: got a fast response
|
|---|
| 444 | IDE: scan_device_int: device found
|
|---|
| 445 | publish device: node 0x90c190c0, path disk/atapi/0/master/raw, module generic/block_io/device_v1
|
|---|
| 446 | publish device: node 0x90c192a0, path disk/ata/0/slave/raw, module generic/block_io/device_v1
|
|---|
| 447 | PCI-IDE: Controller in legacy mode: cmd 0x170, ctrl 0x376, irq 15
|
|---|
| 448 | PCI-IDE: init channel...
|
|---|
| 449 | PCI-IDE: channel index 1
|
|---|
| 450 | PCI-IDE: bus master base 0xd808
|
|---|
| 451 | PCI-IDE: init channel done
|
|---|
| 452 | IDE: scan_device_worker: bus 0x90c0e300, device-number 0
|
|---|
| 453 | IDE: create_device: bus 0x90c0e300, device-number 0
|
|---|
| 454 | IDE: setup_device_links: bus 0x90c0e300, device 0x90c18400
|
|---|
| 455 | IDE: scan_device_int: device 0x90c18400, atapi 0
|
|---|
| 456 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 457 | IDE: scan_device_int: got a fast response
|
|---|
| 458 | IDE: scan_device_int: device found
|
|---|
| 459 | IDE: scan_device_worker: bus 0x90c0e300, device-number 1
|
|---|
| 460 | IDE: create_device: bus 0x90c0e300, device-number 1
|
|---|
| 461 | IDE: setup_device_links: bus 0x90c0e300, device 0x90c18800
|
|---|
| 462 | IDE: scan_device_int: device 0x90c18800, atapi 0
|
|---|
| 463 | IDE: scan_device_int: send_command failed
|
|---|
| 464 | IDE: scan_device_int: device 0x90c18800, atapi 1
|
|---|
| 465 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 466 | IDE: scan_device_int: no fast response to inquiry
|
|---|
| 467 | IDE: scan_device_int: status 0x00
|
|---|
| 468 | IDE: scan_device_int: busy bit not set after 100ms - probably noone there
|
|---|
| 469 | IDE: scan_device_int: aborting because busy bit not set
|
|---|
| 470 | IDE: destroy_device: device 0x90c18800
|
|---|
| 471 | IDE: cleanup_device_links: device 0x90c18800
|
|---|
| 472 | IDE: scan_device_worker: bus 0x90c0e300, device-number 0
|
|---|
| 473 | IDE: destroy_device: device 0x90c18400
|
|---|
| 474 | IDE: cleanup_device_links: device 0x90c18400
|
|---|
| 475 | IDE: create_device: bus 0x90c0e300, device-number 0
|
|---|
| 476 | IDE: setup_device_links: bus 0x90c0e300, device 0x90c18400
|
|---|
| 477 | IDE: scan_device_int: device 0x90c18400, atapi 0
|
|---|
| 478 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 479 | IDE: scan_device_int: got a fast response
|
|---|
| 480 | IDE: scan_device_int: device found
|
|---|
| 481 | IDE: scan_device_worker: bus 0x90c0e300, device-number 1
|
|---|
| 482 | IDE: create_device: bus 0x90c0e300, device-number 1
|
|---|
| 483 | IDE: setup_device_links: bus 0x90c0e300, device 0x90c18800
|
|---|
| 484 | IDE: scan_device_int: device 0x90c18800, atapi 0
|
|---|
| 485 | IDE: scan_device_int: send_command failed
|
|---|
| 486 | IDE: scan_device_int: device 0x90c18800, atapi 1
|
|---|
| 487 | IDE: scan_device_int: waiting 100ms...
|
|---|
| 488 | IDE: scan_device_int: no fast response to inquiry
|
|---|
| 489 | IDE: scan_device_int: status 0x00
|
|---|
| 490 | IDE: scan_device_int: busy bit not set after 100ms - probably noone there
|
|---|
| 491 | IDE: scan_device_int: aborting because busy bit not set
|
|---|
| 492 | IDE: destroy_device: device 0x90c18800
|
|---|
| 493 | IDE: cleanup_device_links: device 0x90c18800
|
|---|
| 494 | publish device: node 0x90c19840, path disk/ata/1/master/raw, module generic/block_io/device_v1
|
|---|
| 495 | ahci: ahci_supports_device
|
|---|
| 496 | KDiskDeviceManager::_Scan(/dev/disk/ata)
|
|---|
| 497 | KDiskDeviceManager::_Scan(/dev/disk/ata/0)
|
|---|
| 498 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave)
|
|---|
| 499 | KDiskDeviceManager::_Scan(/dev/disk/ata/0/slave/raw)
|
|---|
| 500 | found device: /dev/disk/ata/0/slave/raw
|
|---|
| 501 | KDiskDeviceManager::_Scan(/dev/disk/ata/1)
|
|---|
| 502 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/master)
|
|---|
| 503 | KDiskDeviceManager::_Scan(/dev/disk/ata/1/master/raw)
|
|---|
| 504 | found device: /dev/disk/ata/1/master/raw
|
|---|
| 505 | KDiskDeviceManager::_Scan(/dev/disk/atapi)
|
|---|
| 506 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0)
|
|---|
| 507 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0/master)
|
|---|
| 508 | KDiskDeviceManager::_Scan(/dev/disk/atapi/0/master/raw)
|
|---|
| 509 | found device: /dev/disk/atapi/0/master/raw
|
|---|
| 510 | KDiskDeviceManager::_Scan(/dev/disk/usb)
|
|---|
| 511 | KDiskDeviceManager::_Scan(/dev/disk/usb/0)
|
|---|
| 512 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/0)
|
|---|
| 513 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/0/raw)
|
|---|
| 514 | found device: /dev/disk/usb/0/0/raw
|
|---|
| 515 | usb_disk: operation 0x00 failed at the SCSI level
|
|---|
| 516 | usb_uhci: td (0x01972a60) error: status: 0x394007ff; token: 0x00e90269;
|
|---|
| 517 | usb_uhci: td (0x01972aa0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 518 | usb_uhci: td (0x01972ac0) error: status: 0x394007ff; token: 0x01810269;
|
|---|
| 519 | usb_uhci: td (0x01972b00) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 520 | usb_uhci: td (0x01972b20) error: status: 0x394007ff; token: 0x01810269;
|
|---|
| 521 | usb_disk: receiving the command status wrapper failed
|
|---|
| 522 | usb_uhci: td (0x01972ba0) error: status: 0x394007ff; token: 0xffe80269;
|
|---|
| 523 | usb_disk: failed to update capacity
|
|---|
| 524 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/1)
|
|---|
| 525 | KDiskDeviceManager::_Scan(/dev/disk/usb/0/1/raw)
|
|---|
| 526 | found device: /dev/disk/usb/0/1/raw
|
|---|
