Opened 10 years ago
Last modified 4 years ago
#11201 assigned bug
Matrox output
| Reported by: | TmTFx | Owned by: | nobody |
|---|---|---|---|
| Priority: | normal | Milestone: | R1.1 |
| Component: | Drivers/Graphics/Matrox | Version: | R1/Development |
| Keywords: | Matrox | Cc: | |
| Blocked By: | Blocking: | ||
| Platform: | All |
Description
I'm using a computer with a Matrox G550 PCIe it has two dvi outputs, the problem is that when I switch on the computer the system uses the DVI1, but after the haiku boot screen (the one with the icons atom, disk magnifier, ..., rocket) when it starts the Desktop the DVI1 is switched off and the screen on DVI2 switches on showing the Desktop. (The DVI2 is used even if there are no monitors connected)
Haiku rev 47783
Change History (5)
comment:1 by , 10 years ago
| Component: | - General → Drivers/Graphics/Matrox |
|---|---|
| Owner: | changed from to |
comment:2 by , 8 years ago
| Owner: | changed from to |
|---|---|
| Status: | new → assigned |
comment:4 by , 5 years ago
Something similar is happening with Matrox G400: If both the connectors are connected (dvi and vga) the dvi is used to display the boot progress while the vga remains detatched, than it switches off the dvi and no desktop appears in any screen. If only the vga is connected the boot process is not visible (maybe it's on the dvi port disconnected), but at least a desktop appears on the vga screen If only the dvi is connected the boot process is visible but no desktop will appear
comment:5 by , 4 years ago
| Milestone: | R1 → R1.1 |
|---|
hrev52017 x86_64 and Matrox driver v0.33 (Nov 2, 2009) reviewed.
Looks like the support is there. @Fabio can you retest with a recent nightly image of Haiku and provide syslog info - if you still have this hardware to test?