Intel Extreme freeze on H47860, hrev47914

[Atarian]

Using nightly H47860, boot fails when using default boot parameters.

The computer boots fine in safe graphics mode.

When booting with the on screen debug messages (paging disabled) The last two lines read:

intel_extreme: accelerant; intel_extreme.accelerant
[broadcom570x] (bge) Disabling fastboot

Find attached log files an outputs described as required in https://dev.haiku-os.org/wiki/ReportingBugs

[Atarian]

Syslog

[Atarian]

listdev output

[Atarian]

listimage | grep drivers output

[Atarian]

UPDATE: H47839 works if the screen setting in the boot options is changed from default to a different resolution (not necessarily the native resolution that my monitor ends up at)

[jessicah]

Try with hrev47864 or newer. If the screen blanks out, then reboot and boot with failsafe graphics mode and select a resolution, then upload the syslog again :)

If you do an upgrade instead of a fresh install, please also rm /boot/system/var/log/syslog before testing, so there's less noise to filter through...

[Atarian]

syslog-new-h47865

[Atarian]

Replying to jessicah:

Try with hrev47864 or newer. If the screen blanks out, then reboot and boot with failsafe graphics mode and select a resolution, then upload the syslog again :)

If you do an upgrade instead of a fresh install, please also rm /boot/system/var/log/syslog before testing, so there's less noise to filter through...

Please find attached syslog for a fresh install of H47865, booting still fails with defaults. Thanks jessicah

[Atarian]

This bug still occurs with the latest nightly hrev47914, Haiku only boots in safe mode

[Atarian]

This bug still occurs with the latest nightly hrev47914, Haiku only boots in safe mode

[waddlesplash]

Please retest after hrev53040.

[waddlesplash]

No reply.

[nielx]

Remove milestone for tickets with status = closed and resolution != fixed