#11707 closed bug (fixed)
no keyboard input since 48609
Reported by: | luroh | Owned by: | pulkomandy |
---|---|---|---|
Priority: | normal | Milestone: | R1 |
Component: | Drivers/Keyboard/PS2 | Version: | R1/Development |
Keywords: | Cc: | ||
Blocked By: | Blocking: | ||
Platform: | All |
Description
Not sure why but hrev48609 breaks all keyboard input in VMware and VirtualBox for me, pure gcc2.
Attachments (2)
Change History (16)
follow-up: 3 comment:1 by , 10 years ago
comment:2 by , 10 years ago
Running on bare metal with a std gcc2h install, after updating to 48611 I got a similar issue. the keyboard does not reset whrn the desktop starts to show as it usually does. both the mouse and keyboaed are frozen. Even the Num-Lock and Caps-Lock keys are dead. no dafe-mode option will resolve it.
comment:3 by , 10 years ago
Replying to waddlesplash:
Is this a homegrown version, or are you using one of the prebuilt nightlies?
Home brewed but squeaky-clean gcc2 @release-vmware.
comment:4 by , 10 years ago
The problem is somewhat intermittent here. I just booted the same vmware image again and got keyboard back. It didn't survive a "warm" reboot however and is now gone again.
comment:5 by , 10 years ago
Serial log attached from a "bad" boot, with kernel_debugger 'teams' -> 'threads' -> 'bt #IDs'
comment:6 by , 10 years ago
One thing that's of interest from that output: The PS/2 keyboard watcher thread that should be there is missing entirely.
comment:7 by , 10 years ago
Component: | - General → Drivers/Keyboard/PS2 |
---|
Further note, the bad boot doesn't have any indicator that the PS2 keyboard was found at all, while the good boot does, so it'd appear this might be a timing problem on the part of the PS2 driver. That one hasn't changed in nearly a month though, so it's somewhat odd that it'd suddenly start displaying issues.
comment:8 by , 10 years ago
I get this problem on real hardware as well, for both keyboard and mouse.
comment:9 by , 10 years ago
I had a further look at the logs and the sources. The keyboard device is published ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000
but then we never get the ps2: keyboard found
from keyboard_open
. However we also don't get the "keyboard probing failed" message from there.
I rebuilt the ps/2 driver with tracing enabled, and it seems keyboard_open
isn't called at all. ps/2 interrupts from the keyboard result in syslog messages: "input/keyboard/at/0 not enabled, data 0xa6 dropped".
comment:10 by , 10 years ago
comment:14 by , 10 years ago
I still get intermitent boot without the keyboard (PS/2) on real hardware. I kill the input server and have it back.
When not working, the input server pathmonitor tread is very active.
Is this a homegrown version, or are you using one of the prebuilt nightlies?