Opened 4 years ago
Closed 9 months ago
#16889 closed bug (invalid)
XHCI: error while getting the hub descriptor: Device stalled
Reported by: | yochanon | Owned by: | waddlesplash |
---|---|---|---|
Priority: | normal | Milestone: | Unscheduled |
Component: | Drivers/USB/XHCI | Version: | R1/beta2 |
Keywords: | Cc: | ||
Blocked By: | Blocking: | ||
Platform: | All |
Description
I went ahead and downloaded hrev55022 to try Haiku out again since it'd been quite a while since my last try at it.
Unfortunately when I put the flashdrive with Haiku beta in a USB2 slot, it boots, but when I put in another USB flashdrive to have Haiku make a 'live', persistent version, Haiku can't even see the flashdrive plugged in to a USB3 slot.
I tried 4 USB3 slots trying to get Haiku to recognize that a flashdrive was plugged in, but it simply couldn't see it. I tried it with three different flashdrives in the same 4 USB3 slots.
The flashdrives are all Samsung Fit flashdrives, two are 64GB and two are 128GB.
Attachments (1)
Change History (6)
comment:1 by , 4 years ago
comment:2 by , 4 years ago
Component: | - General → Drivers/USB/XHCI |
---|---|
Owner: | changed from | to
Platform: | x86-64 → All |
Summary: | USB3 still not seen by Haiku on flashdrive → XHCI: error while getting the hub descriptor: Device stalled |
KERN: usb xhci 1: transfer error on slot 1 endpoint 1: Stall KERN: usb error xhci 1: error while getting the hub descriptor: Device stalled
comment:3 by , 4 years ago
I notice this is an ASMedia device with interface revision 0x100, maybe relevant.
Please upload a syslog from a boot on the USB2 slot.