56184 crashes at system startup

[vectorman]

After update on hrev56184 I've got error message at system startup. Message appears on every system boot. Type "con" make system start and work normally.

Attached clean syslog.

System installed on real hardware.

[vectorman]

syslog

[vectorman]

previous_syslog

[waddlesplash]

Interestingly I see you also have an iaxwifi200 device on this machine. Does WiFi work now?

[waddlesplash]

Please test after hrev56185, it should resolve this problem.

[vectorman]

WiFi scans networks, allow to select one and enter passphrase, but not connecting. Also Ethernet network is not functioning.

I'm going to check hrev56185 in a few hours.

[waddlesplash]

Ethernet not functioning is due to the KDL.

Please check your syslog for errors after trying to connect to WiFi and see if there appears to be anything of note.

[vectorman]

I've updated to hrev56191.

Startup error message is gone. Ethernet is back online. WiFi scan networks, allow to select and enter passphrase. Does not connect.

I've attached clean syslog.

[vectorman]

syslog 56191

[vectorman]

56191

[vectorman]

Update.

Console command: ifconfig /dev/net/iaxwifi200/0 join {SSID} {password}

WiFi has been connected and worked well.... For a few minutes. Then disconnected.

I've discovered that after console command WiFi connecting and work well. I'll continue testing.

[waddlesplash]

Thanks for testing!

I don't see any WiFi errors in the log. If problems persist with it, that deserves a new ticket.