Opened 2 years ago

Last modified 2 years ago

#17972 assigned bug

no sound with Framework Laptop (12th Gen Intel Core)

Reported by: taos Owned by: korli
Priority: normal Milestone: Unscheduled
Component: Drivers/Audio/HDA Version: R1/Development
Keywords: Cc:
Blocked By: Blocking:
Platform: All

Description

According to listdev, hrev56511 sees the following multimedia device but can't use it. Preferences - Media shows no usable devices. 

device Multimedia controller (Audio device) [4|3|80]
  vendor 8086: Intel Corporation
  device 51c8: Alder Lake PCH-P High Definition Audio Controller

Relevant (maybe) parts of the syslog (full syslog of hrev56511 64bit attached): 

KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  3: vendor 8086, device 51c8, revision 01
KERN: PCI:   class_base 04, class_function 03, class_api 80
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 51c8: Alder Lake PCH-P High Definition Audio Controller
KERN: PCI:   info: Multimedia controller (Audio device)
KERN: PCI:   line_size 10, latency 20, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 0002, subsystem_vendor_id f111
KERN: PCI:   interrupt_line ff, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 000000605d1b8000, pci 000000605d1b8000, size 00004000, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 000000605d000000, pci 000000605d000000, size 00100000, flags 04 00
KERN: PCI:   Capabilities: PM, vendspec, MSI

KERN: sis7018:init_hardware:ver:2.0.2
KERN: pci_reserve_device(0, 31, 3, hda)
KERN: HDA: Detected controller @ PCI:0:31:3, IRQ:16, type 8086/51c8 (f111/0002)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/hda
KERN: es1370: init_hardware()
KERN: emuxki: init_hardware()
KERN: echo3g: init_hardware()
KERN: echo3g: no card found
KERN: auvia: init_hardware()
KERN: auich: init_hardware()
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x43a00000, size:    0x80000, type: 0
KERN:   mtrr:  1: base: 0x43ae0000, size:    0x10000, type: 0
KERN:   mtrr:  2: base: 0x43ac0000, size:    0x20000, type: 0
KERN:   mtrr:  3: base: 0x43af0000, size:     0x8000, type: 0
KERN:   mtrr:  4: base: 0x60000000, size: 0x20000000, type: 0
KERN:   mtrr:  5: base: 0x80000000, size: 0x80000000, type: 0
KERN:   mtrr:  6: base: 0x605d1a0000, size:    0x10000, type: 0
KERN:   mtrr:  7: base: 0x4000000000, size: 0x10000000, type: 1
KERN: update_mtrrs(): Succeeded setting MTRRs after ignoring uncacheable ranges up to size 0x4000.
KERN: hda: enabling PCI bus mastering
KERN: hda: enabling PCI memory access
KERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 68
KERN: msi_allocate_vectors: allocated 1 vectors starting from 68
KERN: msi enabled: 0x0081
KERN: hda: using MSI vector 68
KERN: hda: DMA snooping: no
KERN: hda: HDA v1.0, O:9/I:7/B:0, #SDO:1, 64bit:yes
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x43a00000, size:    0x80000, type: 0
KERN:   mtrr:  1: base: 0x43ae0000, size:    0x10000, type: 0
KERN:   mtrr:  2: base: 0x43ac0000, size:    0x20000, type: 0
KERN:   mtrr:  3: base: 0x43af0000, size:     0x8000, type: 0
KERN:   mtrr:  4: base: 0x60000000, size: 0x20000000, type: 0
KERN:   mtrr:  5: base: 0x80000000, size: 0x80000000, type: 0
KERN:   mtrr:  6: base: 0x605d1a0000, size:    0x10000, type: 0
KERN:   mtrr:  7: base: 0x4000000000, size: 0x10000000, type: 1
KERN: update_mtrrs(): Succeeded setting MTRRs after ignoring uncacheable ranges up to size 0x4000.
KERN: hda: Failed to get vendor and revision parameters: Operation timed out
KERN: hda: no active codec
KERN: msi_free_vectors: freeing 1 vectors starting from 68
KERN: free_io_interrupt_vectors: freeing 1 vectors starting from 68
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x43a00000, size:    0x80000, type: 0
KERN:   mtrr:  1: base: 0x43ac0000, size:    0x20000, type: 0
KERN:   mtrr:  2: base: 0x43af0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0x43ae0000, size:    0x10000, type: 0
KERN:   mtrr:  4: base: 0x43afc000, size:     0x2000, type: 0
KERN:   mtrr:  5: base: 0x43af8000, size:     0x4000, type: 0
KERN:   mtrr:  6: base: 0x60000000, size: 0x20000000, type: 0
KERN:   mtrr:  7: base: 0x80000000, size: 0x80000000, type: 0
KERN:   mtrr:  8: base: 0x605d1a0000, size:    0x10000, type: 0
KERN:   mtrr:  9: base: 0x4000000000, size: 0x10000000, type: 1
KERN: update_mtrrs(): Succeeded setting MTRRs after ignoring uncacheable ranges up to size 0x1000.
KERN: hda: ERROR: No such device(80007007)

Attachments (7)

syslog_timestamp_hrev56511.txt​ (139.4 KB ) - added by taos 2 years ago.
syslog booting hrev56511 with timestamps
Media preferences hrev56521.png​ (58.3 KB ) - added by taos 2 years ago.
no audio input in Media Preferences of hrev56521
syslog_hrev56521.txt​ (141.0 KB ) - added by taos 2 years ago.
syslog with timestamps booting hrev56621
Media preferences after rebooting from Linux.png​ (28.0 KB ) - added by taos 2 years ago.
audio in Media preferences after rebooting from linux
syslog_hrev56524_with_sound.txt​ (153.8 KB ) - added by taos 2 years ago.
syslog of hrev56524 with audible sound after rebboting from linux
output_cat_dev_acpi_namespace.txt​ (205.9 KB ) - added by taos 2 years ago.
output of 'cat /dev/acpi/namespace' (hrev56530)
syslog_hrev56541.txt​ (386.0 KB ) - added by taos 2 years ago.
syslog of hrev56541 (first re-booting from haiku, last re-booting from linux)

Download all attachments as: .zip

Change History (25)

by taos, 2 years ago

Attachment: syslog_timestamp_hrev56511.txt​ added

syslog booting hrev56511 with timestamps

comment:1 by korli, 2 years ago

Owner: changed from nobody to korli
Status: new → assigned

comment:3 by korli, 2 years ago

Merged in hrev56517

by taos, 2 years ago

Attachment: Media preferences hrev56521.png​ added

no audio input in Media Preferences of hrev56521

by taos, 2 years ago

Attachment: syslog_hrev56521.txt​ added

syslog with timestamps booting hrev56621

comment:4 by taos, 2 years ago

With hrev56521, there's still no audio input to choose from in Media Preferences:

no audio input in Media Preferences of hrev56521

However, compared to hrev56511, there's now an additional line in syslog (full syslog for hrev56521 attached): 

KERN: hda: quirk disable miscbdcge on init

And the following has changed to 'yes': 

KERN: hda: DMA snooping: yes

comment:5 by korli, 2 years ago

The device is like powered off. No idea what could help.

comment:6 by korli, 2 years ago

Does it work with FreeBSD or OpenBSD?

in reply to:  6 comment:7 by taos, 2 years ago

Replying to korli:

Does it work with FreeBSD or OpenBSD?

Not yet tested, still deciding between FreeBSD and OpenBSD and thinking about the best partition layout that fits on the internal disk and leaves enough room for shared data partitions (hey, those three (and soon four) operating systems have to co-exist and interact peacefully ;-) ).

lspci -vvv under Linux doesn't add more useful information, does it? 

00:1f.3 Audio device: Intel Corporation Alder Lake PCH-P High Definition Audio Controller (rev 01) (prog-if 80)
        Subsystem: Device f111:0002
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 196
        IOMMU group: 15
        Region 0: Memory at 605d1b8000 (64-bit, non-prefetchable) [size=16K]
        Region 4: Memory at 605d000000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel, snd_sof_pci_intel_tgl

comment:8 by korli, 2 years ago

No, I looked at some logs for this laptop at linux-hardware.org and couldn't spot anything. Or try ​https://github.com/helloSystem/hello live USB.

in reply to:  5 comment:9 by taos, 2 years ago

Replying to korli:

The device is like powered off. No idea what could help.

audio in Media preferences after rebooting from linux

It appears in Media preferences after rebooting from Linux (but not after a cold boot°). However, it doesn't list the speakers, only the headphone output and still doesn't produce any sound.

° Unfortunately, rebooting from Linux prevents the touchpad from working, and starting WebPositive then kills the network connection after some 30 s.

New in syslog: 

KERN: hda: Audio Group: Output delay: 13 samples, Input delay: 13 samples, Beep Generator: yes
KERN: hda:   #GPIO: 4, #GPO: 0, #GPI: 0, unsol: yes, wake: yes
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 88khz 96khz 192khz 
KERN: hda:   widget start 10, count 17
KERN: hda: 10: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Jack, Right HP out, 1/8", Green, Association:4
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Unsol. responses] [Stereo] 
KERN: hda: 	Inputs: 16 17 
KERN: hda: 11: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	Jack, Right Mic in, 1/8", Pink, Association:2
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Unsol. responses] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 12: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	None, Other, N/A, N/A, Association:15
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Unsol. responses] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 13: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Fixed, Speaker, ATAPI internal, Green, Association:1
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Stereo] 
KERN: hda: 	Inputs: 16 17 
KERN: hda: 14: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	Fixed, Mic in, ATAPI internal, Black, Association:3
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 15: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	None, Other, N/A, N/A, Association:15
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 16: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 88khz 96khz 192khz 
KERN: hda: 	Supported power states: 
KERN: hda: 	[L-R swap] [Power] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.75 dB, # steps: 127, offset to 0 dB: 127
KERN: hda: 17: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 88khz 96khz 192khz 
KERN: hda: 	Supported power states: 
KERN: hda: 	[L-R swap] [Power] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.75 dB, # steps: 127, offset to 0 dB: 127
KERN: hda: 18: Audio input
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 88khz 96khz 192khz 
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Proc widget] [Stereo] 
KERN: hda: 	Inputs: <20> 
KERN: hda: 19: Audio input
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 88khz 96khz 192khz 
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Proc widget] [Stereo] 
KERN: hda: 	Inputs: <21> 
KERN: hda: 20: Audio selector
KERN: hda: 	Supported power states: 
KERN: hda: 	[L-R swap] [Power] [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 1 dB, # steps: 46, offset to 0 dB: 16
KERN: hda: 	Inputs: 22 16 17 14 15 
KERN: hda: 21: Audio selector
KERN: hda: 	Supported power states: 
KERN: hda: 	[L-R swap] [Power] [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 1 dB, # steps: 46, offset to 0 dB: 16
KERN: hda: 	Inputs: 22 16 17 14 15 
KERN: hda: 22: Audio selector
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Stereo] 
KERN: hda: 	Inputs: 12 11 
KERN: hda: 23: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits bitstream 
KERN: hda: 	Supported rates: 44khz 48khz 88khz 96khz 192khz 
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Digital] [Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 24: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, Other, N/A, N/A, Association:15
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Digital] [Conn. list] [Unsol. responses] [Stereo] 
KERN: hda: 	Inputs: <23> 
KERN: hda: 25: Beep generator
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Amplifier override] [Out amplifier] 
KERN: hda: 	Out Amp: supports mute, step size: 6 dB, # steps: 3, offset to 0 dB: 3
KERN: hda: 26: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 	[Stereo] 
KERN: hda: build output tree: use mixer
KERN: hda:   look at pin widget 10 (2 inputs)
KERN: hda:     try widget 16: 0xffffffff8299dc08
KERN: hda:     try widget 17: 0xffffffff8299dcb4
KERN: hda:   look at pin widget 13 (2 inputs)
KERN: hda:     try widget 16: 0xffffffff8299dc08
KERN: hda:     try widget 17: 0xffffffff8299dcb4
KERN: hda: try without mixer!
KERN: hda: build output tree: don't use mixer
KERN: hda:   look at pin widget 10 (2 inputs)
KERN: hda:     try widget 16: 0xffffffff8299dc08
KERN: hda:     widget 16 is candidate
KERN: hda:       output: added output widget 16
KERN: hda:     add pin widget 10
KERN: hda:   look at pin widget 13 (2 inputs)
KERN: hda:     try widget 16: 0xffffffff8299dc08
KERN: hda:     widget 16 is candidate
KERN: hda:       output: added output widget 16
KERN: hda:     add pin widget 13
KERN: hda: build input tree
KERN: hda:   look at input widget 18 (1 inputs)
KERN: hda:     try widget 20: 0xffffffff8299deb8
KERN: hda:     widget 20 is candidate
KERN: hda:           input: added input widget 11
KERN: hda:         input: added mixer/selector widget 22
KERN: hda:       input: added mixer/selector widget 20
KERN: hda:         input: added input widget 14
KERN: hda:       input: added mixer/selector widget 20
KERN: hda:     add pin widget 18
KERN: hda:   look at input widget 19 (1 inputs)
KERN: hda:     try widget 21: 0xffffffff8299df64
KERN: hda:     widget 21 is candidate
KERN: hda:       input: not added mixer/selector widget 21
KERN: hda: build tree!
KERN: hda: 	Audiogroup:
KERN: hda: 10: Pin complex
KERN: hda: 	[Pres Detect][HP Drive][Output][EAPD]
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Unsol. responses] [Stereo] 
KERN: hda: 	Inputs: <16> 17 
KERN: hda: 11: Pin complex
KERN: hda: 	[Pres Detect][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80][EAPD]
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Unsol. responses] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 12: Pin complex
KERN: hda: 	[Pres Detect][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80][EAPD]
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Unsol. responses] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 13: Pin complex
KERN: hda: 	[Output][Balance][EAPD]
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Stereo] 
KERN: hda: 	Inputs: <16> 17 
KERN: hda: 14: Pin complex
KERN: hda: 	[Input]
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 15: Pin complex
KERN: hda: 	[Input]
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 10 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 16: Audio output
KERN: hda: 	Supported power states: 
KERN: hda: 	[L-R swap] [Power] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.75 dB, # steps: 127, offset to 0 dB: 127
KERN: hda: 17: Audio output
KERN: hda: 	Supported power states: 
KERN: hda: 	[L-R swap] [Power] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.75 dB, # steps: 127, offset to 0 dB: 127
KERN: hda: 18: Audio input
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Proc widget] [Stereo] 
KERN: hda: 	Inputs: <20> 
KERN: hda: 19: Audio input
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Proc widget] [Stereo] 
KERN: hda: 	Inputs: <21> 
KERN: hda: 20: Audio selector
KERN: hda: 	Supported power states: 
KERN: hda: 	[L-R swap] [Power] [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 1 dB, # steps: 46, offset to 0 dB: 16
KERN: hda: 	Inputs: <22> 16 17 14 15 
KERN: hda: 21: Audio selector
KERN: hda: 	Supported power states: 
KERN: hda: 	[L-R swap] [Power] [Conn. list] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 1 dB, # steps: 46, offset to 0 dB: 16
KERN: hda: 	Inputs: <22> 16 17 14 15 
KERN: hda: 22: Audio selector
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Conn. list] [Stereo] 
KERN: hda: 	Inputs: 12 <11> 
KERN: hda: 23: Audio output
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Digital] [Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 24: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Digital] [Conn. list] [Unsol. responses] [Stereo] 
KERN: hda: 	Inputs: <23> 
KERN: hda: 25: Beep generator
KERN: hda: 	Supported power states: 
KERN: hda: 	[Power] [Amplifier override] [Out amplifier] 
KERN: hda: 	Out Amp: supports mute, step size: 6 dB, # steps: 3, offset to 0 dB: 3
KERN: hda: 26: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 	[Stereo] 
KERN: hda: Enabled unsolicited responses on widget 10
KERN: hda: Enabled unsolicited responses on widget 11
KERN: hda: Enabled unsolicited responses on widget 12
KERN: hda: Enabled unsolicited responses on widget 24
KERN: hda: ENABLE pin widget 10
KERN: hda: ENABLE EAPD pin widget 10
KERN: hda: ENABLE pin widget 13
KERN: hda: ENABLE EAPD pin widget 13
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 16 (offset 127)
KERN: hda: input vref 50 enabled
KERN: hda: input vref 80 enabled
KERN: hda: ENABLE pin widget 11
KERN: hda: ENABLE EAPD pin widget 11
KERN: hda: UNMUTE/SET INPUT GAIN widget 11 (offset 0)
KERN: hda: ENABLE pin widget 14
KERN: hda: UNMUTE/SET INPUT GAIN widget 14 (offset 0)
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 20 (offset 16)
KERN: hda: streams playback 0xffffffffc2cecb80, record 0xffffffffc2ceca40
KERN: hda: sensed pin widget 10, 0
KERN: hda: Codec 0 Vendor: 111d Product: 7695 Subsystem: f1110002, Revision: 1.0.1.1 Quirks: 0700
KERN: looking for settings file
KERN: hda: sample size 4, num channels 2, buffer length 10240
KERN: hda: hda_stream_setup_buffers: setup stream 1: SR=192000, SF=24 F=0x1831 (0x100)
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 163840 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 1 fifo size: 1536 num_io_widgets: 1
KERN: hda: widgets: 
KERN: 16 
KERN: hda: sample size 4, num channels 2, buffer length 10240
KERN: hda: hda_stream_setup_buffers: setup stream 2: SR=192000, SF=24 F=0x1831 (0x100)
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 163840 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 2 fifo size: 1536 num_io_widgets: 1
KERN: hda: widgets: 
KERN: 18 
KERN: hda_stream_start() offset e0
KERN: hda_stream_start() offset 0

KERN: hda: buffer_exchange: Error waiting for playback buffer to finish (Interrupted system call)!
KERN: hda_stream_stop()
Last message repeated 1 time

The Live CD mode of the FreeBSD installation medium does produce sound (just checked with the acoustic feedback of the command line), both over the speakers and the headphone jack (it switches accordingly). For FreeBSD, the audio device does not have to be "initialized" by rebooting from Linux.

Last edited 2 years ago by taos (previous) (diff)

by taos, 2 years ago

Attachment: Media preferences after rebooting from Linux.png​ added

audio in Media preferences after rebooting from linux

comment:10 by taos, 2 years ago

I have sound in OpenBSD (mp3 stream in browser). Switching between headphones and speakers work, as well as changing the volume with the media keys. Any information I should collect from the OpenBSD system?

comment:11 by korli, 2 years ago

Could it be that the HDA device is in PCIe cold state? Then waking up from D3 has to happen with platform support, ie ACPI.

comment:12 by taos, 2 years ago

I got it once (so far) to actually emit audible sound (incl. switching between headphones and speakers) after rebooting from linux, no idea how that worked. Corresponding syslog is attached.

Media preferences shows under HD Audio output only "Right Headphones" with gain controls, in the next column, there's only a centered "Speaker" without any controls. It stays the same and doesn't react to plugging the headphone cable in/out. Media keys don't work.

by taos, 2 years ago

Attachment: syslog_hrev56524_with_sound.txt​ added

syslog of hrev56524 with audible sound after rebboting from linux

comment:13 by korli, 2 years ago

Could you attach the result of cat /dev/acpi/namespace ? I've added a command acpi_call (still to be merged), which would help to make sure the device is out of its cold state.

by taos, 2 years ago

Attachment: output_cat_dev_acpi_namespace.txt​ added

output of 'cat /dev/acpi/namespace' (hrev56530)

comment:14 by korli, 2 years ago

Thanks, the ACPI path to call is '\_SB_.PC00.HDAS._PS0'

comment:15 by korli, 2 years ago

acpi_call is merged and provided by the haiku_extras package. Please update and install this package, then acpi_call -p '\_SB_.PC00.HDAS._PS0' should switch to the correct state. If this works, you can try to restart the media_server.

comment:16 by taos, 2 years ago

I'll have a look as soon as hrev56537 is available from SoftwareUpdater. At the moment, the most recent is haiku_extras-r1~beta3_hrev56536-1-x86_64.hpkg which should be the last revison without acpi_call.

comment:17 by taos, 2 years ago

After a cold boot (or re-booting from Haiku), acpi_call -p '\_SB_.PC00.HDAS._PS0' results in Unknown object type '0'. Hitting "Restart media services" in Media preferences doesn't affect the available options for Audio Input/Output.

After re-booting from linux, I already have HD Audio as Audio Input/Output (this time again with actual sound). acpi_call -p '\_SB_.PC00.HDAS._PS0' still gives Unknown object type '0'. Hitting "Restart media services" in Media preferences disables sound (no usable Audio Input/Output to choose from).

by taos, 2 years ago

Attachment: syslog_hrev56541.txt​ added

syslog of hrev56541 (first re-booting from haiku, last re-booting from linux)

comment:18 by korli, 2 years ago

Summary: no sound with "Alder Lake PCH-P High Definition Audio Controller" → no sound with Framework Laptop (12th Gen Intel Core)

I've tested on a Alder Lake laptop and audio works.

Note: See TracTickets for help on using tickets.