Opened 6 weeks ago

Closed 4 weeks ago

Last modified 4 weeks ago

#18969 closed bug (fixed)

USB dongle with fat partitions are not detected anymore starting with hrev57740

Reported by: andianton Owned by: nobody
Priority: high Milestone: R1/beta5
Component: File Systems/FAT Version: R1/Development
Keywords: Cc: Jim906, waddlesplash
Blocked By: Blocking:
Platform: All

Description

Bug description: starting with hrev57740, USB dongle with fat partitions are not detected anymore.

Note: with hrev57737 everything WORKS. The same USB dongle can be mounted in read or rear/write mode without any problem.

Tested on Haiku x86_64 installed as native and unique operating system, using a SanDisk USB dongle with capacity of 128gb, only one fat partition.

Note2: bfs partitions on USB dongle can be mounted without any problems.

Steps for reproducting bug: insert an USB dongle with fat partition.

Expected behavior: device should be recognized and shown when accessing the Disks icon

Actual behavior: device ar not seen at all

Note3: the issue is still present in the last build hrev57921

Attachments (4)

fat_partition_test.tar.gz​ (260.9 KB ) - added by andianton 6 weeks ago.
syslog on different build versions for testing purpose
FatFirstMB​ (1000.0 KB ) - added by andianton 4 weeks ago.
First MB of fat partition
5MB​ (5.0 MB ) - added by Kierunkowy74 4 weeks ago.
Dump of 5MiB "Efi boot data" partition created by Haiku DriveSetup
Anothersyslog​ (415.9 KB ) - added by Kierunkowy74 4 weeks ago.
Syslog from a machine, includes two "EFI boot" partitions (64 and 5 MiB, dump of second one is attached too) being created, and attempt to mount them. The USB drive was activated once during this session.

Change History (31)

comment:1 by nephele, 6 weeks ago

Keywords: usb fat partitions device not recognized detecting missing removed
Milestone: Unscheduled → R1/beta5
Priority: normal → high
Version: R1/beta4 → R1/Development

That commit range is a bit wierd, it does not look like the fat driver is touched?

However the fat driver itself was replaced in the nightlies, but not in that commit range.

comment:2 by nephele, 6 weeks ago

Cc: Jim906 waddlesplash added

comment:3 by waddlesplash, 6 weeks ago

Please attach a syslog.

comment:4 by andianton, 6 weeks ago

Please, let me know about the correct scenario:

(1)

  • booting with USB dongle attached
  • get syslog

or

(2)

  • booting without USB dongle attached
  • insert USB dongle
  • get syslog

or

(3)

  • booting without USB dongle attached
  • get syslog

Also, let me know if you need both syslog files for working/not working build and if it's indicated to attach the syslog file or post it as comment here.

Important: for testing purposes, the OS is booting now also from an USB dongle. So I have one dongle with Haiku and another dongle with fat partition. Everything worked fine until hrev57440.

On my SSD (for day to day use, I'm staying with hrev57609 who works nice), but if you consider is a must to boot from SSD to test this issue, I can upgrade my machine... but I really prefer to keep my system safe, because I have a lot of work to do and I don' want to broke something.

comment:5 by waddlesplash, 6 weeks ago

Is there any difference in behavior between 1 and 2? Just the syslog from 2 will suffice, so long as it has errors displayed in it (and the new FAT driver prints a good amount of information, so it should.)

comment:6 by andianton, 6 weeks ago

Note: syslog of hrev57440 with dongle inserted 

---------

KERN:   Size: 34 cm x 19 cm
KERN:   Gamma=2.2
KERN:   Red (X,Y)=(0.623,0.369)
KERN:   Green (X,Y)=(0.345,0.61)
KERN:   Blue (X,Y)=(0.148,0.97)
KERN:   White (X,Y)=(0.313,0.329)
KERN: Supported Future Video Modes:
KERN: Supported VESA Video Modes:
KERN: Additional Video Mode (1366x768@59Hz):
KERN: clock=70 MHz
KERN: h: (1366, 1402, 1450, 1492)
KERN: v: (768, 771, 776, 782)
KERN: size: 34.399 cm x 19.399 cm
KERN: border: 0 cm x 0 cm
KERN: Ascii Data: LG Display
KERN: Ascii Data: LP156WH4-TLA1
KERN: Welcome to the Haiku boot loader!
KERN: Haiku revision: hrev57740
KERN: number of drives: 2
KERN: add_partitions_for(0x00105258, mountFS = no)
KERN: add_partitions_for(fd = 0, mountFS = no)
KERN: 0x00105480 Partition::Partition
KERN: 0x00105480 Partition::Scan()
KERN: check for partitioning_system: GUID Partition Map
KERN: check for partitioning_system: Intel Partition Map
KERN:   priority: 810
KERN: check for partitioning_system: Intel Extended Partition
KERN: 0x00105600 Partition::Partition
KERN: 0x00105480 Partition::AddChild 0x00105600
KERN: 0x00105600 Partition::SetParent 0x00105480
KERN: new child partition!
KERN: 0x001056c8 Partition::Partition
KERN: 0x00105480 Partition::AddChild 0x001056c8
KERN: 0x001056c8 Partition::SetParent 0x00105480
KERN: new child partition!
KERN: 0x00105790 Partition::Partition
KERN: 0x00105480 Partition::AddChild 0x00105790
KERN: 0x00105790 Partition::SetParent 0x00105480
KERN: new child partition!
KERN: 0x00105480 Partition::Scan(): scan child 0x00105600 (start = 6291456, size = 629145600, parent = 0x00105480)!
KERN: 0x00105600 Partition::Scan()
KERN: check for partitioning_system: GUID Partition Map
KERN: check for partitioning_system: Intel Partition Map
KERN: check for partitioning_system: Intel Extended Partition
KERN: 0x00105480 Partition::Scan(): scan child 0x001056c8 (start = 635437056, size = 2949120, parent = 0x00105480)!
KERN: 0x001056c8 Partition::Scan()
KERN: check for partitioning_system: GUID Partition Map
KERN: check for partitioning_system: Intel Partition Map
KERN: check for partitioning_system: Intel Extended Partition
KERN: 0x00105480 Partition::Scan(): scan child 0x00105790 (start = 638386176, size = 7365197824, parent = 0x00105480)!
KERN: 0x00105790 Partition::Scan()
KERN: check for partitioning_system: GUID Partition Map
KERN: check for partitioning_system: Intel Partition Map
KERN: check for partitioning_system: Intel Extended Partition
KERN: 0x00105480 Partition::~Partition
KERN: 0x00105600 Partition::SetParent 0x00000000
KERN: 0x001056c8 Partition::SetParent 0x00000000
KERN: 0x00105790 Partition::SetParent 0x00000000
KERN: boot partition offset: 638386176
KERN: 0x00105790 Partition::_Mount check for file_system: BFS Filesystem
KERN: PackageVolumeInfo::SetTo()
KERN: load kernel kernel_x86_64...
KERN: video mode: 1024x768x32
KERN: ucode_load: system/non-packaged/data/firmware/intel-ucode/06-2a-07
KERN: ucode_load: couldn't find microcode
KERN: maximum boot loader heap usage: 599696, currently used: 588776
KERN: smp: found 4 cpus
KERN: smp: apic_phys = 0xfee00000
KERN: smp: ioapic_phys = 0xfec00000
KERN: smp: apic (mapped) = 0x81bd9000
KERN: APIC ticks/sec = 99742146
KERN: GDT at 0x5ee80
KERN: phys memory ranges:
KERN:     base 0x0000000000100000, length 0x000000001ff00000
KERN:     base 0x0000000020200000, length 0x000000001fe00000
KERN:     base 0x0000000040200000, length 0x000000006aae4000
KERN:     base 0x00000000aadb8000, length 0x0000000000010000
KERN:     base 0x00000000aade8000, length 0x0000000000132000
KERN:     base 0x00000000aafe8000, length 0x0000000000015KERN: 000
KERN:     base 0x0000000100000000, length 0x000000014fe00000
KERN: allocated phys memory ranges:
KERN:     base 0x0000000000100000, length 0x0000000007007000
KERN: allocated virt memory ranges:
KERN:     base 0xffffffff80000000, length 0x0000000001be7000
KERN: kernel args ranges:
KERN:     base 0xffffffff81109000, length 0x000000000006d000
KERN:     base 0xffffffff81476000, length 0x000000000002e000
KERN:     base 0xffffffff814f0000, length 0x0000000000010000
KERN:     base 0xffffffff81557000, length 0x0000000000010000
KERN:     base 0xffffffff81576000, length 0x0000000000010000
KERN:     base 0xffffffff81652000, length 0x000000000002e000
KERN:     base 0xffffffff818ba000, length 0x0000000000010000
KERN:     base 0xffffffff81908000, length 0x0000000000010000
KERN:     base 0xffffffff8195e000, length 0x0000000000010000
KERN:     base 0xffffffff819a4000, length 0x0000000000010000
KERN:     base 0xffffffff819ef000, length 0x0000000000010000
KERN:     base 0xffffffff81a34000, length 0x0000000000010000
KERN:     base 0xffffffff81ad4000, length 0x0000000000010000
KERN:     base 0xffffffff81b17000, length 0x000000000000d000
KERN:     base 0xffffffff81b39000, length 0x0000000000010000
KERN:     base 0xffffffff81b6d000, length 0x0000000000010000
KERN:     base 0xffffffff81bc6000, length 0x0000000000009000
KERN: kernel entry at 0xffffffff800664b0
KERN: trampolining other cpus
KERN: wait for delivery
KERN: deassert INIT
KERN: wait for delivery
KERN: num startups = 2
KERN: send STARTUP
KERN: wait for delivery
KERN: send STARTUP
KERN: wait for delivery
Last message repeated 1 time
KERN: deassert INIT
KERN: wait for delivery
KERN: num startups = 2
KERN: send STARTUP
KERN: wait for delivery
KERN: send STARTUP
KERN: wait for delivery
Last message repeated 1 time
KERN: deassert INIT
KERN: wait for delivery
KERN: num startups = 2
KERN: send STARTUP
KERN: wait for delivery
KERN: send STARTUP
KERN: wait for delivery
KERN: done trampolining
KERN: Welcome to kernel debugger output!
KERN: Haiku revision: hrev57740, debug level: 2
KERN: CPU: no microcode provided
KERN: CPU 0: type 0 family 6 extended_family 0 model 10 extended_model 2 stepping 7, string 'GenuineIntel'
KERN: CPU 0: vendor 'Intel' model name 'Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz'
KERN: CPU 0: apic id 0, package 0, core 0, smt 0
KERN: CPU 0: cache sharing: L1 id 0, L2 id 0, L3 id 0
KERN: CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline xsave avx syscall nx long dts arat pln ecmd ptm aperfmperf epb xsaveopt 
KERN: CPU 0: patch_level 0x6
KERN: reserve_io_interrupt_vectors: reserved 16 vectors starting from 0
KERN: mark_page_range_in_use(0x0, 0x100): start page is before free list
KERN: mark_page_range_in_use(0x0, 0xa0): start page is before free list
KERN: Welcome to syslog debug output!
KERN: Haiku revision: hrev57740
KERN: mapping local apic at 0xffffffff81bd9000
KERN: arch_altcodepatch_replace found 2 altcodepatches for tag 3
KERN: arch_altcodepatch_replace found 4 altcodepatches for tag 4
KERN: enable XSAVE 0x7 832
KERN: CPU 2: type 0 family 6 extended_family 0 model 10 extended_model 2 stepping 7, string 'GenuineIntel'
KERN: CPU 1: type 0 family 6 extended_family 0 model 10 extended_model 2 stepping 7, string 'GenuineIntel'
KERN: CPU 3: type 0 family 6 extended_family 0 model 10 extended_model 2 stepping 7, string 'GenuineIntel'
KERN: CPU 1: vendor 'Intel' model name 'Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz'
KERN: CPU 3: vendor 'Intel' model name 'Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz'
KERN: CPU 1: apic id 2, package 0, core 1, smt 0
KERN: CPU 3: apic id 3, package 0, core 1, smt 1
KERN: CPU 1: cache sharing: L1 id 2, L2 id 2, L3 id 0
KERN: CPU 3: cache sharing: L1 id 2, L2 id 2, L3 id 0
KERN: CPU 2: vendor 'Intel' model name 'Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz'
KERN: CPU 3: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline xsave osxsave avx syscall nx long dts arat pln ecmd ptm aperfmperf epb xsaveopt 
KERN: CPU 3: patch_level 0x6
KERN: CPU 1: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline xsave osxsave avx syscall nx long dts arat pln ecmd ptm aperfmperf epb xsaveopt 
KERN: CPU 2: apic id 1, package 0, core 0, smt 1
KERN: CPU 1: patch_level 0x6
KERN: CPU 2: cache sharing: L1 id 0, L2 id 0, L3 id 0
KERN: CPU 2: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline xsave osxsave avx syscall nx long dts arat pln ecmd ptm aperfmperf epb xsaveopt 
KERN: CPU 2: patch_level 0x6
KERN: setting up apic for CPU 0: apic id 0, version 17170453
KERN: CPU 0: logical apic id: 0x1
KERN: x86_init_fpu: CPU has SSE... enabling FXSR and XMM.
KERN: reserve_io_interrupt_vectors: reserved 3 vectors starting from 221
KERN: reserve_io_interrupt_vectors: reserved 1 vectors starting from 219
KERN: arch_init_timer: using APIC timer.
KERN: allocate_commpage_entry(2, 16) -> 0x0000000000000200
KERN: scheduler_init: found 4 logical cpus and 3 cache levels
KERN: scheduler switches: single core: false, cpu load tracking: false, core load tracking: true
KERN: scheduler: switching to low latency mode
KERN: msi support enabled
KERN: setting up apic for CPU 2: apic id 1, version 17170453
KERN: setting up apic for CPU 1: apic id 2, version 17170453
KERN: setting up apic for CPU 3: apic id 3, version 17170453
KERN: CPU 1: logical apic id: 0x2
KERN: CPU 3: logical apic id: 0x8
KERN: x86_init_fpu: CPU has SSE... enabling FXSR and XMM.
KERN: CPU 2: logical apic id: 0x4
KERN: x86_init_fpu: CPU has SSE... enabling FXSR and XMM.
Last message repeated 1 time
KERN: allocate_commpage_entry(3, 69) -> 0x0000000000000210
KERN: slab memory manager: created area 0xffffffff80801000 (162)
KERN: PCI: pci_module_init
KERN: ACPI: RSDP 0x00000000000F0430 000024 (v02 _ASUS_)
KERN: ACPI: XSDT 0x00000000AAFFEE18 000064 (v01 _ASUS_ NoteBook 06222004 MSFT 00010013)
KERN: ACPI: FACP 0x00000000AAF9BD98 0000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
KERN: ACPI: DSDT 0x00000000AAF7C018 00D3C8 (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
KERN: ACPI: FACS 0x00000000AAFE5E40 000040
KERN: ACPI: FACS 0x00000000AAFE5D40 000040
KERN: ACPI: APIC 0x00000000AAFFDF18 0000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
KERN: ACPI: HPET 0x00000000AAFE6D18 000038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
KERN: ACPI: ECDT 0x00000000AAFE5B18 0000C1 (v01 _ASUS_ NoteBook 06222004 AMI  00000000)
KERN: ACPI: MCFG 0x00000000AAFE6C98 00003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
KERN: ACPI: SSDT 0x00000000AAF7B018 000925 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
KERN: ACPI: SSDT 0x00000000AAF7A018 000996 (v01 PmRef  CpuPm    00003000 INTL 20091112)
KERN: ACPI: SSDT 0x00000000AAF5FA98 0002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
KERN: ACPI: Forced DSDT copy: length 0x0D3C8 copied locally, original unmapped
KERN: ACPI: 4 ACPI AML tables successfully acquired and loaded
KERN: ACPI: Enabled 11 GPEs in block 00 to 3F
KERN: publish device: node 0xffffffff8217e780, path acpi/namespace, module bus_managers/acpi/namespace/device_v1
KERN: publish device: node 0xffffffff8217e780, path acpi/call, module bus_managers/acpi/call/device_v1
KERN: registering power button
KERN: publish device: node 0xffffffff827593c8, path power/embedded_controller/0, module drivers/power/acpi_embedded_controller/device_v1
KERN: initialize PCI controller from ACPI
KERN: PCI: range from ACPI [0(1),3e(1)] with length 3f
KERN: PCI: range from ACPI [0(1),cf7(1)] with length cf8
KERN: PCI: range from ACPI [d00(1),ffff(1)] with length f300
KERN: PCI: range from ACPI [a0000(1),bffff(1)] with length 20000
KERN: PCI: range from ACPI [c0000(1),c3fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [c4000(1),c7fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [c8000(1),cbfff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [cc000(1),cffff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [d0000(1),d3fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [d4000(1),d7fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [d8000(1),dbfff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [dc000(1),dffff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [e0000(1),e3fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [e4000(1),e7fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [e8000(1),ebfff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [ec000(1),effff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [f0000(1),fffff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [fff00000(1),feafffff(1)] with length fec00000
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [fed40000(1),fed44fff(1)] with length 5000
KERN: PCI: mechanism addr: e0000000, seg: 0, start: 0, end: 3f
KERN: PCI: FixupDevices: checking bus 1 behind 8086:0101
KERN: PCI: FixupDevices: checking bus 2 behind 8086:1c10
KERN: PCI: FixupDevices: checking bus 3 behind 8086:1c12
KERN: PCI: FixupDevices: checking bus 4 behind 8086:1c1a
KERN: PCI: dom 0, bus 0, dev  1, func 0, changed PCI bridge control from 0x0010 to 0x0013
KERN: PCI: dom 0, bus 0, dev 28, func 0, changed PCI bridge control from 0x0010 to 0x0013
KERN: PCI: dom 0, bus 0, dev 28, func 1, changed PCI bridge control from 0x0010 to 0x0013
KERN: PCI: dom 0, bus 0, dev 28, func 5, changed PCI bridge control from 0x0010 to 0x0013
KERN: found io-apic with address 0xfec00000, global interrupt base 0, apic-id 2
KERN: mapping io-apic 0 at physical address 0xfec00000
KERN: io-apic 0 has range 0-23, 24 entries, version 0x00170020, apic-id 2
KERN: setting ACPI interrupt model to APIC
KERN: IRQ routing table with 13 entries
KERN: address 0x1ffff; pin 0; GSI 17; pci 0:1 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06
KERN: address 0x1fffff; pin 1; GSI 19; pci 0:31 pin 2 func mask 4; bios irq: 5; gsi 19; config 0x06
KERN: address 0x1fffff; pin 2; GSI 18; pci 0:31 pin 3 func mask 8; bios irq: 3; gsi 18; config 0x06
KERN: address 0x1dffff; pin 0; GSI 23; pci 0:29 pin 1 func mask 1; bios irq: 5; gsi 23; config 0x06
KERN: address 0x1affff; pin 0; GSI 16; pci 0:26 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: address 0x1bffff; pin 0; GSI 22; pci 0:27 pin 1 func mask 1; bios irq: 5; gsi 22; config 0x06
KERN: address 0x1cffff; pin 0; GSI 16; pci 0:28 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: address 0x1cffff; pin 1; GSI 17; pci 0:28 pin 2 func mask 22; bios irq: 11; gsi 17; config 0x06
KERN: address 0x16ffff; pin 0; GSI 16; pci 0:22 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: address 0x2ffff; pin 0; GSI 16; pci 0:2 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: address 0xffff; pin 0; GSI 17; pci 3:0 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06
KERN: address 0xffff; pin 0; GSI 17; pci 4:0 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06
KERN: address 0xffff; pin 0; GSI 16; pci 1:0 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: found interrupt override for bus 0, source irq 0, global irq 2, flags 0x00000000
KERN: found interrupt override for bus 0, source irq 9, global irq 9, flags 0x0000000d
KERN: free_io_interrupt_vectors: freeing 16 vectors starting from 0
KERN: reserve_io_interrupt_vectors: reserved 24 vectors starting from 0
KERN: using io-apics for interrupt routing
KERN: PCI: [dom 0, bus  0] bus   0, device  0, function  0: vendor 8086, device 0104, revision 09
KERN: PCI:   class_base 06, class_function 00, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 0104: 2nd Generation Core Processor Family DRAM Controller
KERN: PCI:   info: Bridge (Host bridge)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: vendspec
KERN: PCI: [dom 0, bus  0] bus   0, device  1, function  0: vendor 8086, device 0101, revision 09
KERN: PCI:   class_base 06, class_function 04, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 0101: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
KERN: PCI:   info: Bridge (PCI bridge, Normal decode)
KERN: PCI:   line_size 10, latency 00, header_type 81, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0088
KERN: PCI:   primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 00
KERN: PCI:   I/O window d000-dfff
KERN: PCI:   memory window dc000000-dd0fffff
KERN: PCI:   prefetchable memory window 00000000c0000000-00000000d1ffffff
KERN: PCI:   bridge_control 0013, secondary_status 0000
KERN: PCI:   interrupt_line 11, interrupt_pin 01
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: subvendor, PM, MSI, PCIe
KERN: PCI:   Extended capabilities: Virtual Channel, Root Complex Link Declaration
KERN: PCI: [dom 0, bus  1] bus   1, device  0, function  0: vendor 10de, device 1050, revision a1
KERN: PCI:   class_base 03, class_function 00, class_api 00
KERN: PCI:   vendor 10de: NVIDIA Corporation
KERN: PCI:   device 1050: GF119M [GeForce GT 520M]
KERN: PCI:   info: Display controller (VGA compatible controller, VGA controller)
KERN: PCI:   line_size 10, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host dd000000, pci dd000000, size 00080000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1682, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host dc000000, pci dc000000, size 01000000, flags 00
KERN: PCI:   base reg 1: host 00000000c0000000, pci 00000000c0000000, size 10000000, flags 0c 00
KERN: PCI:   base reg 3: host 00000000d0000000, pci 00000000d0000000, size 02000000, flags 0c 00
KERN: PCI:   base reg 5: host 0000d000, pci 0000d000, size 00000080, flags 01
KERN: PCI:   Capabilities: PM, MSI, PCIe, vendspec
KERN: PCI:   Extended capabilities: Virtual Channel, Power Budgeting, Vendor Unique
KERN: PCI: [dom 0, bus  0] bus   0, device  2, function  0: vendor 8086, device 0116, revision 09
KERN: PCI:   class_base 03, class_function 00, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 0116: 2nd Generation Core Processor Family Integrated Graphics Controller
KERN: PCI:   info: Display controller (VGA compatible controller, VGA controller)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1682, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000dd400000, pci 00000000dd400000, size 00400000, flags 04 00
KERN: PCI:   base reg 2: host 00000000b0000000, pci 00000000b0000000, size 10000000, flags 0c 00
KERN: PCI:   base reg 4: host 0000e000, pci 0000e000, size 00000040, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: MSI, PM, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 22, function  0: vendor 8086, device 1c3a, revision 04
KERN: PCI:   class_base 07, class_function 80, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c3a: 6 Series/C200 Series Chipset Family MEI Controller #1
KERN: PCI:   info: Communication controller
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000df60a000, pci 00000000df60a000, size 00000010, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flagsKERN:  00
KERN: PCI:   Capabilities: PM, MSI
KERN: PCI: [dom 0, bus  0] bus   0, device 26, function  0: vendor 8086, device 1c2d, revision 05
KERN: PCI:   class_base 0c, class_function 03, class_api 20
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c2d: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
KERN: PCI:   info: Serial bus controller (USB controller, EHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host df608000, pci df608000, size 00000400, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, DebugPort, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 27, function  0: vendor 8086, device 1c20, revision 05
KERN: PCI:   class_base 04, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c20: 6 Series/C200 Series Chipset Family High Definition Audio Controller
KERN: PCI:   info: Multimedia controller (Audio device)
KERN: PCI:   line_size 10, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1ac3, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 16, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000df600000, pci 00000000df600000, size 00004000, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI, PCIe
KERN: PCI:   Extended capabilities: Virtual Channel, Root Complex Link Declaration
KERN: PCI: [dom 0, bus  0] bus   0, device 28, function  0: vendor 8086, device 1c10, revision b5
KERN: PCI:   class_base 06, class_function 04, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c10: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
KERN: PCI:   info: Bridge (PCI bridge, Normal decode)
KERN: PCI:   line_size 10, latency 00, header_type 81, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0040
KERN: PCI:   primary_bus 00, secondary_bus 02, subordinate_bus 02, secondary_latency 00
KERN: PCI:   I/O window c000-cfff
KERN: PCI:   memory window dec00000-df5fffff
KERN: PCI:   prefetchable memory window 00000000d3700000-00000000d40fffff
KERN: PCI:   bridge_control 0013, secondary_status 2000
KERN: PCI:   interrupt_line 10, interrupt_pin 01
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PCIe, MSI, subvendor, PM
KERN: PCI:   Extended capabilities: (empty list)
KERN: PCI: [dom 0, bus  0] bus   0, device 28, function  1: vendor 8086, device 1c12, revision b5
KERN: PCI:   class_base 06, class_function 04, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c12: 6 Series/C200 Series Chipset Family PCI Express Root Port 2
KERN: PCI:   info: Bridge (PCI bridge, Normal decode)
KERN: PCI:   line_size 10, latency 00, header_type 81, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0040
KERN: PCI:   primary_bus 00, secondary_bus 03, subordinate_bus 03, secondary_latency 00
KERN: PCI:   I/O window b000-bfff
KERN: PCI:   memory window de200000-debfffff
KERN: PCI:   prefetchable memory window 00000000d2c00000-00000000d35fffff
KERN: PCI:   bridge_control 0013, secondary_status 0000
KERN: PCI:   interrupt_line 11, interrupt_pin 02
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PCIe, MSI, subvendor, PM
KERN: PCI:   Extended capabilities: (empty list)
KERN: PCI: [dom 0, bus  3] bus   3, device  0, function  0: vendor 168c, device 002b, revision 01
KERN: PCI:   class_base 02, class_function 80, class_api 00
KERN: PCI:   vendor 168c: Qualcomm Atheros
KERN: PCI:   device 002b: AR9285 Wireless Network Adapter (PCI-Express) (AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card)
KERN: PCI:   info: Network controller
KERN: PCI:   line_size 10, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1089, subsystem_vendor_id 1a3b
KERN: PCI:   interrupt_line 11, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000de200000, pci 00000000de200000, size 00010000, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI, PCIe
KERN: PCI:   Extended capabilities: Advanced Error Reporting, Virtual Channel, Serial Number, Power Budgeting
KERN: PCI: [dom 0, bus  0] bus   0, device 28, function  5: vendor 8086, device 1c1a, revision b5
KERN: PCI:   class_base 06, class_function 04, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c1a: 6 Series/C200 Series Chipset Family PCI Express Root Port 6
KERN: PCI:   info: Bridge (PCI bridge, Normal decode)
KERN: PCI:   line_size 10, latency 00, header_type 81, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0040
KERN: PCI:   primary_bus 00, secondary_bus 04, subordinate_bus 04, secondary_latency 00
KERN: PCI:   I/O window a000-afff
KERN: PCI:   memory window dd800000-de1fffff
KERN: PCI:   prefetchable memory window 00000000d2100000-00000000d2afffff
KERN: PCI:   bridge_control 0013, secondary_status 0000
KERN: PCI:   interrupt_line 11, interrupt_pin 02
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PCIe, MSI, subvendor, PM
KERN: PCI:   Extended capabilities: (empty list)
KERN: PCI: [dom 0, bus  4] bus   4, device  0, function  0: vendor 10ec, device 8168, revision 06
KERN: PCI:   class_base 02, class_function 00, class_api 00
KERN: PCI:   vendor 10ec: Realtek Semiconductor Co., Ltd.
KERN: PCI:   device 8168: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
KERN: PCI:   info: Network controller (Ethernet controller)
KERN: PCI:   line_size 10, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 11, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 0000a000, pci 0000a000, size 00000100, flags 01
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000d2104000, pci 00000000d2104000, size 00001000, flags 0c 00
KERN: PCI:   base reg 4: host 00000000d2100000, pci 00000000d2100000, size 00004000, flags 0c 00
KERN: PCI:   Capabilities: PM, MSI, PCIe, MSI-X, VPD
KERN: PCI:   Extended capabilities: Advanced Error Reporting, Virtual Channel, Serial Number
KERN: PCI: [dom 0, bus  0] bus   0, device 29, function  0: vendor 8086, device 1c26, revision 05
KERN: PCI:   class_base 0c, class_function 03, class_api 20
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c26: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
KERN: PCI:   info: Serial bus controller (USB controller, EHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 17, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host df607000, pci df607000, size 00000400, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, siKERN: ze 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, DebugPort, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  0: vendor 8086, device 1c49, revision 05
KERN: PCI:   class_base 06, class_function 01, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c49: HM65 Express Chipset LPC Controller
KERN: PCI:   info: Bridge (ISA bridge)
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: vendspec
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  2: vendor 8086, device 1c03, revision 05
KERN: PCI:   class_base 01, class_function 06, class_api 01
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c03: 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller
KERN: PCI:   info: Mass storage controller (SATA controller, AHCI 1.0)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 13, interrupt_pin 02, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 0000e0b0, pci 0000e0b0, size 00000008, flags 01
KERN: PCI:   base reg 1: host 0000e0a0, pci 0000e0a0, size 00000004, flags 01
KERN: PCI:   base reg 2: host 0000e090, pci 0000e090, size 00000008, flags 01
KERN: PCI:   base reg 3: host 0000e080, pci 0000e080, size 00000004, flags 01
KERN: PCI:   base reg 4: host 0000e060, pci 0000e060, size 00000020, flags 01
KERN: PCI:   base reg 5: host df606000, pci df606000, size 00000800, flags 00
KERN: PCI:   Capabilities: MSI, PM, SATA, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  3: vendor 8086, device 1c22, revision 05
KERN: PCI:   class_base 0c, class_function 05, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c22: 6 Series/C200 Series Chipset Family SMBus Controller
KERN: PCI:   info: Serial bus controller (SMBus)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 12, interrupt_pin 03, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000df605000, pci 00000000df605000, size 00000100, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 0000e040, pci 0000e040, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: (not supported)
KERN: usb ehci -1: the host controller is bios owned, claiming ownership
KERN: usb ehci -1: controller is still bios owned, waiting
KERN: usb ehci -1: successfully took ownership of the host controller
KERN: sitd entry size 128, itd entry size 128
KERN: usb ehci -1: successfully started the controller
KERN: usb hub 2: port 0: new device connected
KERN: usb hub 8: port 1: new device connected
KERN: usb hub 8: port 3: new device connected
KERN: usb ehci -1: the host controller is bios owned, claiming ownership
KERN: usb ehci -1: controller is still bios owned, waiting
KERN: usb ehci -1: successfully took ownership of the host controller
KERN: sitd entry size 128, itd entry size 128
KERN: usb ehci -1: successfully started the controller
KERN: usb hub 32: port 0: new device connected
KERN: usb hub 38: port 0: new device connected
KERN: usb hub 38: port 1: new device connected
KERN: usb_disk: device reports a lun count of 1
KERN: usb_disk: vendor_identification    "SanDisk "
KERN: usb_disk: product_identification   "Cruzer Blade    "
KERN: usb_disk: product_revision_level   "1.26"
KERN: publish device: node 0xffffffff827a20a8, path disk/usb/0/0/raw, module drivers/disk/usb_disk/device_v1
KERN: [33msdhci:[0m supports_device(vid:8086 pid:1c22)
KERN: get_boot_partitions(): boot volume message:
KERN: KMessage: buffer: 0xffffffff81b79d20 (size/capacity: 347/347), flags: 0xa
KERN:   field: "booted from image" (BOOL): false
KERN:   field: "partition offset"  (LLNG): 638386176 (0x260d0000)
KERN:   field: "packaged"          (BOOL): true
KERN:   field: "boot method"       (LONG): 0 (0x0)
KERN:   field: "boot drive number" (LLNG): 128 (0x80)
KERN:   field: "disk identifier"   (RAWT): data at 0xffffffff81b79e2c, 79 bytes
KERN: get_boot_partitions(): boot method type: 0
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_std_ops(0x1)
KERN: intel: pm_std_ops(0x2)
KERN: dos_std_ops()
Last message repeated 1 time
KERN: ahci: generic AHCI controller found! vendor 0x8086, device 0x1c03
KERN: ahci: ahci_register_device
KERN: ahci: ahci_init_driver
KERN: ahci: ahci_sim_init_bus
KERN: ahci: ahci_sim_init_bus: pciDevice 0xffffffff827af980
KERN: ahci: AHCIController::Init 0:31:2 vendor 8086, device 1c03
KERN: ahci: PCI SATA capability found at offset 0xa8
KERN: ahci: satacr0 = 0x0010b012, satacr1 = 0x00000048
KERN: ahci: pcicmd old 0x0007
KERN: ahci: pcicmd new 0x0006
KERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 24
KERN: msi_allocate_vectors: allocated 1 vectors starting from 24
KERN: msi enabled: 0x0001
KERN: ahci: using MSI vector 24
KERN: ahci: registers at 0xdf606000, size 0x800
KERN: ahci: mapping physical address 0xdf606000 with 2048 bytes for AHCI HBA regs
KERN: ahci: physical = 0xdf606000, virtual = 0xffffffff8130a000, offset = 0, phyadr = 0xdf606000, mapadr = 0xffffffff8130a000, size = 4096, area = 0x00000398
KERN: ahci: cap: Interface Speed Support: generation 3
KERN: ahci: cap: Number of Command Slots: 32 (raw 0x1f)
KERN: ahci: cap: Number of Ports: 6 (raw 0x5)
KERN: ahci: cap: Supports Port Multiplier: no
KERN: ahci: cap: Supports External SATA: no
KERN: ahci: cap: Enclosure Management Supported: yes
KERN: ahci: cap: FIS-based Switching Control: no
KERN: ahci: cap: Supports Command List Override: yes
KERN: ahci: cap: Supports Staggered Spin-up: no
KERN: ahci: cap: Supports Mechanical Presence Switch: no
KERN: ahci: cap: Supports 64-bit Addressing: yes
KERN: ahci: cap: Supports Native Command Queuing: yes
KERN: ahci: cap: Supports SNotification Register: yes
KERN: ahci: cap: Supports Command List Override: yes
KERN: ahci: cap: Supports AHCI mode only: no
KERN: ahci: cap2: DevSleep Entrance from Slumber Only: no
KERN: ahci: cap2: Supports Aggressive Device Sleep Management: no
KERN: ahci: cap2: Supports Device Sleep: no
KERN: ahci: cap2: Automatic Partial to Slumber Transitions: yes
KERN: ahci: cap2: NVMHCI Present: no
KERN: ahci: cap2: BIOS/OS Handoff: no
KERN: ahci: ghc: AHCI Enable: yes
KERN: ahci: Ports Implemented Mask: 0x000005 Number of Available Ports: 2
KERN: ahci: AHCI Version 0001.03.00 Interrupt 24
KERN: ahci: allocating 4096 bytes for AHCI port 0
KERN: ahci: area = 921, size = 4096, virt = 0xffffffff8130b000, phy = 0x145ba000
KERN: ahci: allocating 4096 bytes for AHCI port 2
KERN: ahci: area = 922, size = 4096, virt = 0xffffffff8130c000, phy = 0x145bb000
KERN: ahci: Probe: port 0 link speed 6.0Gb/s
KERN: ahci: Probe: port 2 link speed 1.5Gb/s
KERN: ahci: cookie = 0xffffffff82279600
KERN: ahci: ahci_path_inquiry, cookie 0xffffffff82279600
Last message repeated 1 time
KERN: ahci: ahci_scan_bus, cookie 0xffffffff82279600
KERN: ahci: sg_memcpy phyAddr 0x13557060, size 96
KERN: ahci: ahci_get_restrictions, cookie 0xffffffff82279600
KERN: publish device: node 0xffffffff827b1510, path disk/scsi/0/0/0/raw, module drivers/disk/scsi/scsi_disk/device_v1
KERN: ahci: ahci_get_restrictions, cookie 0xffffffff82279600
KERN: publish device: node 0xffffffff827b1010, path disk/scsi/0/2/0/raw, module drivers/disk/scsi/scsi_cd/device_v1
KERN: ahci: sg_memcpy phyAddr 0x13557180, size 32
KERN: vpd_page_get: 
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557090, size 7
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557220, size 8
KERN: vpd_page_geKERN: t: 
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557090, size 7
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557220, size 64
KERN: periph_check_capacity: TRIM: Setting trim support to UNMAP
KERN: DMAResource@0xffffffff827b1470: low/high 0/100000000, max segment count 32, align 2, boundary 65536, max transfer 130560, max segment size 33554432
KERN: slab memory manager: created area 0xffffffff93801000 (929)
KERN: ahci: sg_memcpy phyAddr 0x13557360, size 32
KERN: vpd_page_get: 
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557270, size 7
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557400, size 8
KERN: vpd_page_get: 
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557270, size 7
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557400, size 64
KERN: periph_check_capacity: TRIM: Setting trim support to UNMAP
KERN: ahci: ahci_ioctl, cookie 0xffffffff82279600
KERN: ahci: Probe: port 2 link speed 1.5Gb/s
KERN: ahci: sata_request::finish ATA command 0xa0 failed: status 0x51, error 0x20
KERN: ahci: sata_request::finish ATAPI packet 25 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 (len 10)
KERN: periph_check_capacity: TRIM: Setting trim support to disabled
KERN: ahci: ahci_ioctl, cookie 0xffffffff82279600
KERN: DMAResource@0xffffffff827b5c98: low/high 0/ffffffffffffffff, max segment count 16, align 1, boundary 0, max transfer 65536, max segment size 18446744073709551615
KERN: usb_disk: got device name "SanDisk Cruzer Blade 1.26": No error
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_std_ops(0x1)
KERN: intel: pm_identify_partition(0, 0: 0, 240057409536, 512)
KERN: intel: Found GPT signature, ignoring.
KERN: intel: pm_std_ops(0x2)
KERN: EFI header: EFI PART
KERN: EFI revision: 10000
KERN: header size: 92
KERN: header CRC: cb7c1160
KERN: absolute block: 1
KERN: alternate block: 468862127
KERN: first usable block: 34
KERN: last usable block: 468862094
KERN: disk GUID: 06768128-c07d-8146-8926-29be1448f07b
KERN: entries block: 2
KERN: entry size:  128
KERN: entry count: 128
KERN: entries CRC: b2631575
KERN: EFI header: EFI PART
KERN: EFI revision: 10000
KERN: header size: 92
KERN: header CRC: 4b63582d
KERN: absolute block: 468862127
KERN: alternate block: 1
KERN: first usable block: 34
KERN: last usable block: 468862094
KERN: disk GUID: 06768128-c07d-8146-8926-29be1448f07b
KERN: entries block: 468862095
KERN: entry size:  128
KERN: entry count: 128
KERN: entries CRC: b2631575
KERN: [  0] partition type: 42465331-3ba3-10f1-802a-4861696b7521
KERN:       unique id: 77432b91-183a-614f-a1e4-438bda1e2412
KERN:       start block: 40
KERN:       end block: 468860967
KERN:       size: 228935.999 MB
KERN:       attributes: 0
KERN:       name: HaikuSSD
KERN: identify(0, 0xffffffff82791588)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3192801:    17] invalid superblock!
KERN: raw_command: 
KERN: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
Last message repeated 1 time
KERN: efi_gpt_scan_partition(cookie = 0xffffffff8200d8c0)
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_std_ops(0x1)
KERN: intel: pm_identify_partition(0, 3: 20480, 240056795136, 512)
KERN: intel: pm_std_ops(0x2)
KERN: identify(0, 0xffffffff82791588)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3198353:    17] invalid superblock!
KERN: raw_command: 
KERN: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
Last message repeated 1 time
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_std_ops(0x1)
KERN: intel: pm_identify_partition(0, 2: 0, 8004304896, 512)
KERN: identify(0, 0xffffffff82791588)
KERN: found primary descriptor
KERN:   iso9660_primary_descriptor:
KERN:     volume descriptor type: 1 (primary)
KERN:     standard identifier:    CD001 (valid)
KERN:     version:                1
KERN:     identifier:             'haiku-nightly-x86_64            '
KERN:     size:                   3065
KERN:     set size:               1
KERN:     sequence number:        1
KERN:     logical block size:     2048
KERN:     path table size:        10
KERN:     set identifier:                                     
KERN:     root directory record:
KERN:       length:               34
KERN:       location:             20
KERN:       data length:          2048
KERN:       volume space:         1
KERN: iso9660_info::set_string(0xffffffff82791588 ('<NULL>'), 'haiku-nightly-x86_64            ', 20)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3213852:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
Last message repeated 1 time
KERN: intel: pm_scan_partition(0, 2: 0, 8004304896, 512)
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(0, 6291456, 629145600, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(0, 4: 6291456, 629145600, 512)
KERN: identify(0, 0xffffffff82791540)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3227728:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
Last message repeated 1 time
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(0, 635437056, 2949120, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(0, 5: 635437056, 2949120, 512)
KERN: identify(0, 0xffffffff82791540)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3241350:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(0, 638386176, 7365197824, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(0, 6: 638386176, 7365197824, 512)
KERN: identify(0, 0xffffffff82791540)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3257602:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: device 0: /dev/disk/scsi/0/0/0/raw
KERN:   media status:      No error
KERN:   device flags:      2
KERN:   offset:            0
KERN:   size:              240057409536 (228936.585 MB)
KERN:   content size:      240057409536
KERN:   block size:        512
KERN:   physical block size: 512
KERN:   child count:       1
KERN:   index:             -1
KERN:   status:            0
KERN:   flags:             5
KERN:   volume:            -1
KERN:   disk system:       partitioning_systems/efi_gpt/v1
KERN:   name:              KINGSTON  SA400S37240G
KERN:   content name:      <NULL>
KERN:   type:              <NULL>
KERN:   content type:      GUID Partition Map
KERN:   params:            <NULL>
KERN:   content params:    <NULL>
KERN:   partition 3: /dev/disk/scsi/0/0/0/0
KERN:     offset:            20480
KERN:     size:              240056795136 (228936 MB)
KERN:     content size:      240056795136
KERN:     block size:        2048
KERN:     physical block size: 512
KERN:     child count:       0
KERN:     index:             0
KERN:     status:            0
KERN:     flags:             2
KERN:     volume:            -1
KERN:     disk system:       file_systems/bfs/v1
KERN:     name:              HaikuSSD
KERN:     content name:      HaikuSSD
KERN:     type:              Be File System
KERN:     content type:      Be File System
KERN:     params:            <NULL>
KERN:     content params:    <NULL>
KERN: device 1: /dev/disk/scsi/0/2/0/raw
KERN:   media status:      No media present
KERN:   device flags:      5
KERN: device 2: /dev/disk/usb/0/0/raw
KERN:   media status:      No error
KERN:   device flags:      2
KERN:   offset:            0
KERN:   size:              8004304896 (7633.5 MB)
KERN:   content size:      8004304896
KERN:   block size:        512
KERN:   physical block size: 512
KERN:   child count:       3
KERN:   index:             -1
KERN:   status:            0
KERN:   flags:             5
KERN:   volume:            -1
KERN:   disk system:       partitioning_systems/intel/map/v1
KERN:   name:              SanDisk Cruzer Blade 1.26
KERN:   content name:      <NULL>
KERN:   type:              <NULL>
KERN:   content type:      Intel Partition Map
KERN:   params:            <NULL>
KERN:   content params:    <NULL>
KERN:   partition 4: /dev/disk/usb/0/0/0
KERN:     offset:            6291456
KERN:     size:              629145600 (600 MB)
KERN:     content size:      629145600
KERN:     block size:        2048
KERN:     physical block size: 512
KERN:     child count:       0
KERN:     index:             0
KERN:     status:            0
KERN:     flags:         KERN:     2
KERN:     volume:            -1
KERN:     disk system:       file_systems/bfs/v1
KERN:     name:              <NULL>
KERN:     content name:      Haiku
KERN:     type:              Be File System
KERN:     content type:      Be File System
KERN:     params:            type = 235 ; active = 0
KERN:     content params:    <NULL>
KERN:   partition 5: /dev/disk/usb/0/0/1
KERN:     offset:            635437056
KERN:     size:              2949120 (2.812 MB)
KERN:     content size:      2949120
KERN:     block size:        512
KERN:     physical block size: 512
KERN:     child count:       0
KERN:     index:             1
KERN:     status:            0
KERN:     flags:             2
KERN:     volume:            -1
KERN:     disk system:       file_systems/fat/v1
KERN:     name:              <NULL>
KERN:     content name:      haiku esp
KERN:     type:              EFI system data
KERN:     content type:      FAT32 File System
KERN:     params:            type = 239 ; active = 0
KERN:     content params:    <NULL>
KERN:   partition 6: /dev/disk/usb/0/0/2
KERN:     offset:            638386176
KERN:     size:              7365197824 (7024 MB)
KERN:     content size:      7365197824
KERN:     block size:        2048
KERN:     physical block size: 512
KERN:     child count:       0
KERN:     index:             2
KERN:     status:            0
KERN:     flags:             2
KERN:     volume:            -1
KERN:     disk system:       file_systems/bfs/v1
KERN:     name:              <NULL>
KERN:     content name:      HaikuStick
KERN:     type:              Be File System
KERN:     content type:      Be File System
KERN:     params:            type = 235 ; active = 1
KERN:     content params:    <NULL>
KERN: Identified boot partition by partition offset.
KERN: bfs: mounted "HaikuStick" (root node at 524288, device = /dev/disk/usb/0/0/2)
KERN: Mounted boot partition: /dev/disk/usb/0/0/2
KERN: unknown: [3312899:    17] Adding packages from "/boot/system/packages"
KERN: slab memory manager: created area 0xffffffff94001000 (974)
KERN: slab memory manager: created area 0xffffffff94801000 (975)
KERN: slab memory manager: created area 0xffffffff95001000 (977)
KERN: slab memory manager: created area 0xffffffff95801000 (978)
KERN: unknown: [5111688:    17] StringPool usage:
KERN: unknown: [5111894:    17]   total unique strings:       36405,   636998 bytes, overhead: 837315 bytes
KERN: unknown: [5112349:    17]   total strings with dups:   194078,  2504035 bytes
KERN: unknown: [5112700:    17]   unshared strings:            1802
KERN: unknown: [5112980:    17]   bytes saved:              1029722
KERN: unknown: [5121815:    17] Adding packages from "/boot/home/config/packages"
KERN: unknown: [5123863:    17] Failed to open packages activation file: No such file or directory
KERN: unknown: [5124303:    17] Loading packages from activation file failed. Loading all packages in packages directory.
KERN: unknown: [5132092:    17] StringPool usage:
KERN: unknown: [5132296:    17]   total unique strings:       36405,   636998 bytes, overhead: 837315 bytes
KERN: unknown: [5132760:    17]   total strings with dups:   194089,  2504100 bytes
KERN: unknown: [5133110:    17]   unshared strings:            1799
KERN: unknown: [5133391:    17]   bytes saved:              1029787
KERN: module_init_post_boot_device() failed to normalize path of module image 0xffffffff8200f030, "ramfs"
KERN: module_init_post_boot_device() failed to normalize path of module image 0xffffffff8226cf38, "fat"
KERN: module: Search for file_cache/launch_speedup/v1 failed.
KERN: smbios_scan
KERN: found System Information at 0xffffffff80c77c7a
KERN: found vendor 1 product 2
KERN: smbios_scan found vendor ASUSTeK Computer Inc. product K53SJ
KERN: publish device: node 0xffffffff95183c00, path disk/virtual/ram/control, module drivers/disk/virtual/ram_disk/control/device_v1
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/zero
KERN: usb_modeswitch: init_hardware()
KERN: usb_modeswitch: init_driver()
KERN: usb_modeswitch: trying module bus_managers/usb/v3.1
KERN: usb_modeswitch: publish_devices()
KERN: usb_modeswitch: uninit_driver()
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/usb_modeswitch
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/tty
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/null
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/dprintf
KERN: con_init: trying module console/frame_buffer/v1
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/console
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(7, 3: 20480, 240056795136, 2048)
KERN: identify(7, 0xffffffff82027f78)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [5375232:    17] invalid superblock!
KERN: raw_command: 
KERN: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(7, 6291456, 629145600, 2048)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(7, 4: 6291456, 629145600, 2048)
KERN: identify(7, 0xffffffff82027f78)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [5390080:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(7, 635437056, 2949120, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(7, 5: 635437056, 2949120, 512)
KERN: identify(7, 0xffffffff82027f78)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [5406953:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: allocate_commpage_entry(4, 16) -> 0x0000000000000258
KERN: using Intel P-States: min 8, max 21, boost 21
KERN: found cpufreq module: power/cpufreq/intel_pstates/v1
KERN: scheduler switches: single core: false, cpu load tracking: true, core load tracking: true
KERN: using Intel C-States: C0, C1, C2, C3, C4
KERN: found cpuidle module: power/cpuidle/intel_cstates/v1
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x80000000, size: 0x80000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x80000000, size: 0x80000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaae00000, size:   0x200000, type: 0
KERN:   mtrr:  1: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  2: base: 0xc0000000, size: 0x40000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaae00000, size:   0x200000, type: 0
KERN:   mtrr:  1: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  2: base: 0xc0000000, size: 0x40000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x80000, type: 0
KERN:   mtrr:  2: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  3: base: 0xc0000000, size: 0x40000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  5: base: 0xc0000000, size: 0x40000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  5: base: 0xc0000000, size: 0x40000000, type: 0
KERN: kernel debugger extension "debugger/run_on_exit/v1": loaded
KERN: kernel debugger extension "debugger/usb_keyboard/v1": loaded
KERN: kernel debugger extension "debugger/invalidate_on_exit/v1": loaded
KERN: kernel debugger extension "debugger/hangman/v1": loaded
KERN: kernel debugger extension "debugger/disasm/v1": loaded
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: publish device: node 0xffffffff82163ca0, path random, module bus_managers/random/device_v1
KERN: publish device: node 0xffffffff82163ca0, path urandom, module bus_managers/random/device_v1
KERN: publish device: node 0xffffffff82163ac0, path power/button/power_fixed, module drivers/power/acpi_button/devicKERN: e_v1
KERN: publish device: node 0xffffffff821638e0, path power/acpi_battery/0, module drivers/power/acpi_battery/device_v1
KERN: publish device: node 0xffffffff82163340, path power/button/sleep, module drivers/power/acpi_button/device_v1
KERN: [33msdhci:[0m supports_device(vid:8086 pid:1c22)
KERN: package_daemon: [7845029:   692] root at "/boot" (device: 3, node: 524288) registered
KERN: package_daemon: [7845461:   692] volume at "/boot/system" registered
KERN: package_daemon: [7845957:   692] volume at "/boot/home/config" registered
KERN: register_domain(9, unix)
KERN: register_domain(5, internet6)
KERN: register_domain(1, internet)
KERN: unregister_domain(0xffffffff9554e300, 9, unix)
KERN: unregister_domain(0xffffffff9554e200, 1, internet)
KERN: unregister_domain(0xffffffff9554e280, 5, internet6)
KERN: register_domain(5, internet6)
KERN: unregister_domain(0xffffffff9554e200, 5, internet6)
KERN: register_domain(4, link)
KERN: slab memory manager: created area 0xffffffff96001000 (9301)
KERN: register_domain(1, internet)
KERN: register_domain(5, internet6)
KERN: bfs: mounted "Haiku" (root node at 131072, device = /dev/disk/usb/0/0/0)
KERN: Test: and [file_exists [/system/bin/FirstBootPrompt], or [not [file_exists [/boot/home/config/settings/Locale settings]], readonly ]] -> 0
KERN: pci_reserve_device(3, 0, 0, atheroswifi)
KERN: [atheroswifi] (ath) bus_alloc_resource(3, [16], 0x0, 0xffffffffffffffff, 0x1,0x2)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: [atheroswifi] (ath) bus_alloc_resource(1, [0], 0x0, 0xffffffffffffffff, 0x1,0x6)
KERN: [atheroswifi] [ath] AR9285 Main LNA config: LNA2
KERN: [atheroswifi] [ath] AR9285 Alt LNA config: LNA1
KERN: [atheroswifi] [ath] LNA diversity enabled, Diversity enabled
KERN: [atheroswifi] [ath] Enabling diversity for Kite
KERN: [atheroswifi] (ath) RX timestamp: 32 bits
KERN: [atheroswifi] (ath) TX timestamp: 32 bits
KERN: [atheroswifi] (ath) [HT] enabling HT modes
KERN: [atheroswifi] (ath) [HT] 1 stream STBC receive enabled
KERN: [atheroswifi] (ath) [HT] 1 RX streams; 1 TX streams
KERN: ieee80211_sysctl_attach not implemented, yet.
KERN: : [atheroswifi] 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
KERN: : [atheroswifi] 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
KERN: : [atheroswifi] 1T1R
KERN: : [atheroswifi] 11ng MCS 20MHz
KERN: : [atheroswifi] MCS 0-7: 6.5Mbps - 65Mbps
KERN: : [atheroswifi] 11ng MCS 40MHz:
KERN: : [atheroswifi] MCS 0-7: 13.5Mbps - 135Mbps
KERN: : [atheroswifi] 11ng MCS 40MHz SGI:
KERN: : [atheroswifi] MCS 0-7: 15Mbps - 150Mbps
KERN: [atheroswifi] (ath) AR9285 mac 192.2 RF5133 phy 14.0
KERN: [atheroswifi] (ath) 2GHz radio: 0x0000; 5GHz radio: 0x00c0
KERN: [atheroswifi] (ath) Use hw queue 1 for WME_AC_BE traffic
KERN: [atheroswifi] (ath) Use hw queue 0 for WME_AC_BK traffic
KERN: [atheroswifi] (ath) Use hw queue 2 for WME_AC_VI traffic
KERN: [atheroswifi] (ath) Use hw queue 3 for WME_AC_VO traffic
KERN: [atheroswifi] (ath) Use hw queue 8 for CAB traffic
KERN: [atheroswifi] (ath) Use hw queue 9 for beacons
KERN: [atheroswifi] (ath) using multicast key search
KERN: if_initname(0xffffffff80c46800, wlan, 18)
KERN: [atheroswifi] atheroswifi: /dev/net/atheroswifi/0
KERN: [net/atheroswifi/0] ieee80211_node_vattach: init 2 auth 12 run 20 probe 2
KERN: [net/atheroswifi/0] ieee80211_vap_attach: STA parent  flags 0x400c2008 flags_ext 0x2
KERN: [net/atheroswifi/0] ieee80211_alloc_node 0xffffffff819e0000<e0:b9:a5:1e:d4:5e> in station table
KERN: [net/atheroswifi/0] [e0:b9:a5:1e:d4:5e] ieee80211_alloc_node: inact_reload 2
KERN: if_attach 0xffffffff95553520
KERN: start_wlan: wlan started.
KERN: atheroswifi: init_driver(0xffffffff935fe990)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/atheroswifi
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_rndis
KERN: [33musb_davicom:[0m00.08.754:init_driver::ver.0.9.5
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_davicom
KERN: [33musb_asix:[0m00.08.757:init_driver::ver.0.10.1
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_asix
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/pegasus
KERN: etherpci: init_driver KERN: init_driver: etherpci not found
KERN: pci_reserve_device(4, 0, 0, rtl81xx)
KERN: [rtl81xx] (re) bus_alloc_resource(3, [24], 0x0, 0xffffffffffffffff, 0x1,0x2)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: [rtl81xx] (re) MSI count : 1
KERN: [rtl81xx] (re) MSI-X count : 4
KERN: [rtl81xx] (re) bus_alloc_resource(3, [32], 0x0, 0xffffffffffffffff, 0x1,0x2)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 25
KERN: msi_allocate_vectors: allocated 1 vectors starting from 25
KERN: msix configured for 1 vectors
KERN: [rtl81xx] (re) Using 1 MSI-X message
KERN: [rtl81xx] (re) bus_alloc_resource(1, [1], 0x0, 0xffffffffffffffff, 0x1,0x2)
KERN: [rtl81xx] (re) turning off MSI enable bit.
KERN: [rtl81xx] (re) ASPM disabled
KERN: [rtl81xx] (re) Chip rev. 0x2c000000
KERN: [rtl81xx] (re) MAC rev. 0x00200000
KERN: if_initname(0xffffffff821fe000, re, 18)
KERN: [rtl81xx] rtl81xx: /dev/net/rtl81xx/0
KERN: [rtl81xx] () Found MII: rgephy
KERN: [rtl81xx] () OUI 0x00e04c, model 0x0011, rev. 4
KERN: [rtl81xx] ()  noneKERN: , 10baseTKERN: , 10baseT-FDX, 100baseTXKERN: , 100baseTX-FDXKERN: , 1000baseTKERN: , 1000baseT-masterKERN: , 1000baseT-FDXKERN: , 1000baseT-FDX-masterKERN: , auto
KERN: if_attach 0xffffffff82203320
KERN: msi-x enabled: 0x8003
KERN: rtl81xx: init_driver(0xffffffff81450110)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/rtl81xx
KERN: [net/atheroswifi/0] compat_open(0x2)
KERN: [net/atheroswifi/0] ieee80211_init
KERN: [net/atheroswifi/0] start running, 0 vaps running
KERN: ieee80211_notify_ifnet_change not implemented, yet.
KERN: [net/atheroswifi/0] ieee80211_start_locked: up parent 
KERN: [net/atheroswifi/0] start running, 1 vaps running
KERN: [net/atheroswifi/0] ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0)
KERN: /dev/net/atheroswifi/0: link down, media 0x20080 quality 1000 speed 0
KERN: [net/rtl81xx/0] compat_open(0x2)
KERN: [net/atheroswifi/0] start running, 1 vaps running
KERN: [net/atheroswifi/0] ieee80211_new_state_locked: pending INIT -> SCAN transition lost
KERN: [net/atheroswifi/0] ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0)
KERN: [net/atheroswifi/0] ieee80211_newstate_cb: INIT -> SCAN arg 0
KERN: [net/atheroswifi/0] sta_newstate: INIT -> SCAN (0)
KERN: /dev/net/rtl81xx/0: link down, media 0x22 quality 1000 speed 0
KERN: slab memory manager: created area 0xffffffff96801000 (12548)
AUTH 'sshd'[770]: error: setsockopt IPV6_V6ONLY: Operation not supported
AUTH 'sshd'[770]: Server listening on :: port 22.
AUTH 'sshd'[770]: Server listening on 0.0.0.0 port 22.
AUTH 'sshd'[770]: error: Couldn't create pid file "/packages/openssh-9.8p1-1/.self/var/run/sshd.pid": No such file or directory
KERN: radeon_hd: init_hardware
KERN: Radeon - init_hardware: Version: 5.1.6.0
KERN: Radeon - Radeon_CardDetect: no supported devices found
KERN: nvidia: CALLED init_hardware
KERN: nvidia: init_hardware: no supported device found
KERN: intel_extreme: CALLED status_t init_hardware()
KERN: intel_extreme: get_next_intel_extreme: Intel gfx deviceID: 0x0116
KERN: intel_extreme: CALLED status_t init_driver()
KERN: [36mAGP:[0m bus manager init
KERN: [36mAGP:[0m found 0 AGP devices
KERN: intel_extreme: detect_intel_pch: Intel PCH deviceID: 0x1c49
KERN: intel_extreme: detect_intel_pch: Found CougarPoint PCH
KERN: intel_extreme: get_next_intel_extreme: Intel gfx deviceID: 0x0116
KERN: intel_extreme: (0) SandyBridge Mobile GT2, revision = 0x9
KERN: intel_extreme: CALLED const char** publish_devices()
KERN: intel_extreme: CALLED device_hooks* find_device(const char*)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/intel_extreme
KERN: devfs: "intel_810" api_version missing
KERN: i810: init_hardware() - no supported devices
KERN: ati: init_hardware() - no supported devices
KERN: vesa: init_hardware()
KERN: vesa: init_driver()
KERN: vesa: publish_devices()
KERN: vesa: find_device()
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/vesa
KERN: framebuffer: init_hardware()
KERN: intel_extreme: CALLED status_t device_open(const char*, uint32, void**)
KERN: intel_extreme: intel_extreme: CALLED status_t intel_extreme_init(intel_info&)
KERN: intel_gart: bus manager init
KERN: intel_gart: found intel bridge
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: intel_gart: GTT base dd600000, size 2097152, entries 512, stolen 67104768
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: intel_gart: detected 64 MB of stolen memory, aperture size 256 MB, GTT size 2048 KB
KERN: intel_gart: GTT base = 0xdd600000
KERN: intel_gart: MMIO base = 0xdd400000
KERN: intel_gart: GMR base = 0xb0000000
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: intel_extreme: Init Intel generation 6 GPU with PCH split.
KERN: intel_extreme: REGS_NORTH_SHARED: 0x40000
KERN: intel_extreme: REGS_NORTH_PIPE_AND_PORT: 0x60000
KERN: intel_extreme: REGS_NORTH_PLANE_CONTROL: 0x70000
KERN: intel_extreme: REGS_SOUTH_SHARED: 0xc0000
KERN: intel_extreme: REGS_SOUTH_TRANSCODER_PORT: 0xe0000
KERN: [36mAGP:[0m create memory 0xffffffff80f80440, base ffffffffa0000000, size 10000, flags 0
KERN: [36mAGP:[0m allocation is made of reserved memory
KERN: [36mAGP:[0m reserved memory already bound
KERN: intel_extreme:CALLED status_t intel_en_gating(intel_info&)
KERN: intel_extreme:SandyBridge clock gating
KERN: intel_extreme:CALLED status_t intel_en_downclock(intel_info&)
KERN: intel_extreme: intel_en_downclock: Enabling Intel GPU auto downclocking depth 1
KERN: intel_extreme: Graphic OpRegion physical addr: 0xaaf77018; size: 0x2000
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: intel_extreme: mapping OpRegion: 0xaaf77018 -> 0xffffffff80638018
KERN: intel_extreme: VBT signature "$VBT SANDYBRIDGE-M  ", BDB version 161
KERN: intel_extreme: found child device type: 0x1022
KERN: intel_extreme: found child device type: 0x60d2
KERN: intel_extreme: found child device type: 0x68c6
KERN: intel_extreme: panel type: 2
KERN: intel_extreme: LFP info terminator 300e
KERN: intel_extreme: found LFP of size 1366 x 768 in BIOS VBT tables
KERN: intel_extreme: found bdb lvds backlight info
KERN: intel_extreme: display 2 does not have PWM
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: [36mAGP:[0m create memory 0xffffffff95a42300, base ffffffffa3fff000, size 1000, flags 2
KERN: [36mAGP:[0m allocate 4096 bytes out of 4096
KERN: [36mAGP:[0m bind 4096 bytes at ffffffffa3fff000
KERN: intel_extreme: Overlay registers mapped at 0x3fff000 = 0xffffffffa3fff000 - ffffffffa0000000 (22fe0000)
KERN: intel_extreme: Allocating hardware status pageKERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 26
KERN: msi_allocate_vectors: allocated 1 vectors starting from 26
KERN: msi enabled: 0x0001
KERN: intel_extreme: using message signaled interrupts
KERN: intel_extreme: intel_extreme_init: rawclk rate: 125000 kHz
KERN: intel_extreme: intel_extreme_init: hw_cdclk: 400000 kHz
KERN: intel_extreme: intel_extreme_init: completed successfully!
KERN: intel_extreme: accelerant: intel_extreme.accelerant
KERN: intel_extreme: CALLED status_t intel_init_accelerant(int)
KERN: intel_extreme: Pipe A.
KERN: intel_extreme: Pipe: Pipe is routed through FDI
KERN: intel_extreme: PanelFitter: requested fitter #1
KERN: intel_extreme: PanelFitter: this fitter is connected to pipe #1
KERN: intel_extreme: Pipe Base: 0x0 Plane Base: 0x0
KERN: intel_extreme: Pipe B.
KERN: intel_extreme: Pipe: Pipe is routed through FDI
KERN: intel_extreme: PanelFitter: requested fitter #2
KERN: intel_extreme: PanelFitter: this fitter is not setup by the BIOS: Enabling.
KERN: intel_extreme: Pipe Base: 0x1000 Plane Base: 0x1000
KERN: intel_extreme: adpa: 00c40000
KERN: intel_extreme: dova: 00000018, dovb: 00000018, dovc: 00000018
KERN: intel_extreme: lvds: 80300302
KERN: intel_extreme: dp_a: 00000018
KERN: intel_extreme: dp_b: 00000000
KERN: intel_extreme: dp_c: 00000004
KERN: intel_extreme: dp_d: 00000000
KERN: intel_extreme: tra_dp: 60000418
KERN: intel_extreme: trb_dp: 60000018
KERN: intel_extreme: trc_dp: 60000018
KERN: intel_extreme: Probing DisplayPort 1
KERN: intel_extreme: IsConnected: DisplayPort A PortRegister: 0x2004000
KERN: intel_extreme: IsConnected: DisplayPort A: port not found in VBT
KERN: intel_extreme: Probing DisplayPort 2
KERN: intel_extreme: IsConnected: DisplayPort B PortRegister: 0x5004100
KERN: intel_extreme: IsConnected: DisplayPort B: port not found in VBT
KERN: intel_extreme: Probing DisplayPort 3
KERN: intel_extreme: IsConnected: DisplayPort C PortRegister: 0x5004200
KERN: intel_extreme: IsConnected: DisplayPort C: port found in VBT
KERN: intel_extreme: IsConnected: DisplayPort C link not detected
KERN: intel_extreme: Probing DisplayPort 4
KERN: intel_extreme: IsConnected: DisplayPort D PortRegister: 0x5004300
KERN: intel_extreme: IsConnected: DisplayPort D: port found in VBT
KERN: intel_extreme: IsConnected: DisplayPort D link not detected
KERN: intel_extreme: Probing HDMI 2
KERN: package_daemon: [10278843:   707] The latest volume state is also the currently active one
KERN: package_daemon: [10279414:   707] KERN: Volume::InitialVerify((nil), (nil))
KERN: intel_extreme: IsConnected: HDMI B PortRegister: 0x5001140
KERN: intel_extreme: IsConnected: HDMI B: port not found in VBT
KERN: intel_extreme: Probing HDMI 3
KERN: intel_extreme: IsConnected: HDMI C PortRegister: 0x5001150
KERN: intel_extreme: IsConnected: HDMI C: port found in VBT
KERN: intel_extreme: Probing HDMI 4
KERN: intel_extreme: IsConnected: HDMI D PortRegister: 0x5001160
KERN: intel_extreme: IsConnected: HDMI D: port found in VBT
KERN: intel_extreme: Probing LVDS
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED virtual status_t Port::GetEDID(edid1_info*, bool)
KERN: intel_extreme: LVDS C: trying to read EDID
KERN: intel_extreme: LVDS C: using ddc @ 0x4005018
KERN: package_daemon: [10340144:   707] Volume::InitialVerify(): volume at "/boot/system" is consistent
KERN: package_daemon: [10343835:   707] KERN: Failed to open packages activation file /boot/home/config/packages/administrative/activated-packages: No such file or directory
KERN: package_daemon: [10344702:   707] Failed to get activated packages info from activated packages file. Assuming all package files in package directory are activated.
KERN: package_daemon: [10345549:   707] The latest volume state is also the currently active one
KERN: package_daemon: [10346108:   707] Volume::InitialVerify(0x123df592f4e0, (nil))
KERN: package_daemon: [10357325:   707] Volume::InitialVerify(): volume at "/boot/home/config" is consistent
KERN: intel_extreme: LVDS C: found EDID information!
KERN: EDID info:
KERN:   EDID version: 1.3
KERN:   Vendor: LGD Product ID: 0x2dc
KERN:   Serial #: 0
KERN:   Produced in week/year: 0/2010
KERN:   Type: Digital
KERN:   Size: 34 cm x 19 cm
KERN:   Gamma=2.20
KERN:   Red (X,Y)=(0.6230,0.3691)
KERN:   Green (X,Y)=(0.3457,0.6104)
KERN:   Blue (X,Y)=(0.1484,0.0977)
KERN:   White (X,Y)=(0.3135,0.3291)
KERN: Supported Future Video Modes:
KERN: Supported VESA Video Modes:
KERN: Additional Video Mode (1366x768@59Hz):
KERN: clock=70.000 MHz
KERN: h: (1366, 1402, 1450, 1492)
KERN: v: (768, 771, 776, 782)
KERN: size: 34.4 cm x 19.4 cm
KERN: border: 0.0 cm x 0.0 cm
KERN: Ascii Data: LG Display
KERN: Ascii Data: LP156WH4-TLA1
KERN: intel_extreme: Probing Analog
KERN: intel_extreme: IsConnected: Analog A PortRegister: 0x5001100
KERN: intel_extreme: CALLED virtual status_t Port::GetEDID(edid1_info*, bool)
KERN: intel_extreme: Analog A: trying to read EDID
KERN: intel_extreme: Analog A: using ddc @ 0x4005010
KERN: DDC: ddc2_read: DDC information read failure
KERN: Last message repeated 3 times.
KERN: intel_extreme: Analog A: no EDID information found.
KERN: intel_extreme: Activating clocks
KERN: intel_extreme: CALLED void refclk_activate_ilk(bool)
KERN: intel_extreme: refclk_activate_ilk: Generation 6 graphics
KERN: intel_extreme: refclk_activate_ilk: PCH_DREF_CONTROL before: 0x400
KERN: intel_extreme: refclk_activate_ilk: No changes to reference clock.
KERN: intel_extreme: Probing complete.
KERN: intel_extreme: dump_ports: Connected ports: (port_count: 1)
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: port 0: LVDS C connected
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED virtual pipe_index LVDSPort::PipePreference()
KERN: intel_extreme: CALLED virtual status_t Port::SetPipe(Pipe*)
KERN: intel_extreme: SetPipe: Assigning LVDS C (0x5001180) to pipe A
KERN: intel_extreme: CALLED bool Pipe::IsEnabled()
KERN: intel_extreme: CALLED void Pipe::Enable(bool)
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED status_t create_mode_list()
KERN: intel_extreme: CALLED virtual status_t Port::GetEDID(edid1_info*, bool)
KERN: intel_extreme: intel_set_display_mode(1366x768, virtual: 1366x768)
KERN: intel_extreme: CALLED status_t intel_propose_display_mode(display_mode*, const display_mode*, const display_mode*)
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED void Pipe::Enable(bool)
KERN: [36mAGP:[0m create memory 0xffffffff95a42480, base ffffffffa0010000, size 408000, flags 0
KERN: [36mAGP:[0m allocation is made of reserved memory
KERN: [36mAGP:[0m reserved memory already bound
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED virtual status_t LVDSPort::SetDisplayMode(display_mode*, uint32)
KERN: intel_extreme: SetDisplayMode: LVDS C-3 1366x768
KERN: intel_extreme: SetDisplayMode: LVDS C didn't power off within 1000ms!
KERN: intel_extreme: SetDisplayMode: Setting LVDS to native resolution at 59Hz
KERN: intel_extreme: Enable: PCH_PANEL_FITTER_CONTROL, 0x80800000
KERN: intel_extreme: Enable: PCH_PANEL_FITTER_WINDOW_POS, 0x0
KERN: intel_extreme: CALLED status_t FDILink::PreTrain(display_timing*, uint32*, uint32*, uint32*)
KERN: intel_extreme: PreTrain: FDI Link A:
KERN: intel_extreme: PreTrain: FDI Link Colordepth: 18
KERN: intel_extreme: PreTrain: FDI Link Lanes: 4
KERN: intel_extreme: PreTrain: FDI TX ctrl before: 0xb01c4000
KERN: intel_extreme: PreTrain: FDI RX ctrl before: 0x801a2350
KERN: intel_extreme: SetFDILink: fPipeOffset: 0x0
KERN: intel_extreme: SetFDILink: FDI/PIPE link reference clock is 270Mhz
KERN: intel_extreme: SetFDILink: FDI/PIPE M1 data before: 0x7e12aaaa
KERN: intel_extreme: SetFDILink: FDI/PIPE N1 data before: 0x800000
KERN: intel_extreme: SetFDILink: FDI/PIPE M1 link before: 0x212f6
KERN: intel_extreme: SetFDILink: FDI/PIPE N1 link before: 0x80000
KERN: intel_extreme: SetFDILink: FDI/PIPE link colordepth: 18
KERN: intel_extreme: SetFDILink: FDI/PIPE link with 4 lane(s) in use
KERN: intel_extreme: SetFDILink: FDI/PIPE M1 data after: 0x7e12aaaa
KERN: intel_extreme: SetFDILink: FDI/PIPE N1 data after: 0x800000
KERN: intel_extreme: SetFDILink: FDI/PIPE M1 link after: 0x212f6
KERN: intel_extreme: SetFDILink: FDI/PIPE N1 link after: 0x80000
KERN: intel_extreme: CALLED status_t FDILink::Train(display_timing*, uint32)
KERN: intel_extreme: Train: FDI TX ctrl after: 0xb01c4000
KERN: intel_extreme: Train: FDI RX ctrl after: 0x801a2350
KERN: intel_extreme: compute_dpll_g4x: required MHz: 70, reference clock: 120
KERN: intel_extreme: PLL limits, min: p 28 (p1 2, p2 14), n 3, m 79 (m1 14, m2 7)
KERN: intel_extreme: PLL limits, max: p 112 (p1 8, p2 14), n 5, m 118 (m1 24, m2 11)
KERN: intel_extreme: compute_dpll_g4x: best MHz: 70 (error: 0)
KERN: intel_extreme: compute_pll_divisors: found: p = 42 (p1 = 3, p2 = 14), n = 4, m = 98 (m1 = 18, m2 = 8)
KERN: intel_extreme: LVDS: single channel
KERN: intel_extreme: SetDisplayMode: LVDS Write: 0x80300302
KERN: intel_extreme: CALLED void Pipe::ConfigureClocks(const pll_divisors&, uint32, uint32)
KERN: intel_extreme: Old PLL selection: 0x8
KERN: intel_extreme: Route PLL A to transcoder A
KERN: intel_extreme: New PLL selection: 0x8
KERN: intel_extreme: CALLED void Pipe::ConfigureTimings(display_mode*, bool, port_index)
KERN: intel_extreme: ConfigureTimings(1): fPipeOffset: 0x0
KERN: intel_extreme: CALLED void Pipe::ConfigureScalePos(display_mode*)
KERN: intel_extreme: ConfigureScalePos: fPipeOffset: 0x0
KERN: intel_extreme: CALLED void Pipe::_ConfigureTranscoder(display_mode*)
KERN: intel_extreme: _ConfigureTranscoder: fPipeOffset: 0x0
KERN: intel_extreme: intel_set_display_mode: Port configuration completed successfully!
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED void Pipe::Enable(bool)
KERN: intel_extreme: CALLED status_t intel_get_frame_buffer_config(frame_buffer_config*)
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED void Pipe::Enable(bool)
KERN: intel_extreme: CALLED status_t intel_set_brightness(float)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/wacom
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/usb_hid
KERN: ps2_hid: init_hardware
KERN: ps2_hid: init_driver
KERN: ps2: active multiplexing v1.1 enabled
KERN: ps2_hid: publish_devices
KERN: ps2_hid: uninit_driver
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/ps2_hid
KERN: ps2_dev: reset failed: I/O error
KERN: ps2: devfs_publish_device input/mouse/ps2/0, status = 0xffffffff
KERN: ps2_dev: reset failed: I/O error
KERN: ps2: devfs_publish_device input/mouse/ps2/1, status = 0xffffffff
KERN: ps2_dev: reset failed: I/O error
KERN: ps2: devfs_publish_device input/mouse/ps2/2, status = 0xffffffff
KERN: usb_hid: keyboard device unhandled control 0x00002710
USER: Notify of added/removed/started/stopped device
Last message repeated 2 times
KERN: usb_hid: keyboard device unhandled control 0x00002710
KERN: Elantech version 450F01, under developement! Using fallback.
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/bus/usb_raw
KERN: sis7018:init_hardware:ver:2.0.2
KERN: usb_audio:00.21.698:init_driver::ver.0.0.5
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/usb_audio
KERN: pci_reserve_device(0, 27, 0, hda)
KERN: HDA: Detected controller @ PCI:0:27:0, IRQ:22, type 8086/1c20 (1043/1ac3)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/hda
KERN: emuxki: init_hardware()
KERN: echo3g: init_hardware()
KERN: echo3g: no card found
KERN: auvia: init_hardware()
KERN: auich: init_hardware()
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 27
KERN: msi_allocate_vectors: allocated 1 vectors starting from 27
KERN: msi enabled: 0x0081
KERN: hda: using MSI vector 27
KERN: hda: DMA snooping: yes
KERN: hda: HDA v1.0, O:4/I:4/B:0, #SDO:1, 64bit:yes
KERN: hda: Audio Group: Output delay: 15 samples, Input delay: 15 samples, Beep Generator: yes
KERN: hda:   #GPIO: 2, #GPO: 0, #GPI: 0, unsol: yes, wake: no
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda:   widget start 2, count 34
KERN: hda: 2: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87
KERN: hda: 3: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87
KERN: hda: 4: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 5: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 6: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 88khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Digital] [Format override] [Stereo] 
KERN: hda: 7: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 8: Audio input
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11
KERN: hda: 	Inputs: <35> 
KERN: hda: 9: Audio input
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11
KERN: hda: 	Inputs: <34> 
KERN: hda: 10: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 11: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
KERN: hda: 	Inputs: 24 25 26 27 29 
KERN: hda: 12: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 2 11 
KERN: hda: 13: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 3 11 
KERN: hda: 14: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 15: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 2 11 
KERN: hda: 16: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 17: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 18: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 19: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 20: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Fixed, Speaker, ATAPI internal, N/A, Association:1
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 13 
KERN: hda: 21: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 22: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 23: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [Out amplifier] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <15> 
KERN: hda: 24: Pin complex
KERN: hda: 	[Input] [Output]
KERN: hda: 	Jack, Right Mic in, 1/8", Black, Association:2
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <13> 
KERN: hda: 25: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	Fixed, Mic in, ATAPI internal, N/A, Association:2
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Unsol. responses] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 26: Pin complex
KERN: hda: 	[Input] [Output]
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 13 
KERN: hda: 27: Pin complex
KERN: hda: 	[Input] [Output]
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 13 
KERN: hda: 28: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 29: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	None, Line out, Other analog, Pink, Association:2
KERN: hda: 	Supported power states: D0 
KERN: hda: 30: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Digital] [Conn. list] [Unsol. responses] [Stereo] 
KERN: hda: 	Inputs: <6> 
KERN: hda: 31: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 32: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 	[Proc widget] 
KERN: hda: 33: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Jack, Right HP out, 1/8", Black, Association:1
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 13 
KERN: hda: 34: Audio selector
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	Inputs: 24 25 26 27 29 11 18 
KERN: hda: 35: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 24 25 26 27 29 11 
KERN: hda: build output tree: use mixer
KERN: hda:   look at pin widget 20 (2 inputs)
KERN: hda:     try widget 12: 0xffffffff821d4eb8
KERN: hda:     widget 12 is candidate
KERN: hda:         output: added output widget 2
KERN: hda:       output: added mixer/selector widget 12
KERN: hda:         output: not added mixer/selector widget 11
KERN: hda:     add pin widget 20
KERN: hda:   look at pin widget 23 (1 inputs)
KERN: hda:     try widget 15: 0xffffffff821d50bc
KERN: hda:     widget 15 is candidate
KERN: hda:         output: added output widget 2
KERN: hda:       output: added mixer/selector widget 15
KERN: hda:         output: not added mixer/selector widget 11
KERN: hda:     add pin widget 23
KERN: hda:   look at pin widget 26 (2 inputs)
KERN: hda:     try widget 12: 0xffffffff821d4eb8
KERN: hda:     widget 12 is candidate
KERN: hda:     try widget 13: 0xffffffff821d4f64
KERN: hda:     widget 13 is candidate
KERN: hda:         output: added output widget 3
KERN: hda:       output: added mixer/selector widget 13
KERN: hda:         output: not added mixer/selector widget 11
KERN: hda:     add pin widget 26
KERN: hda:   look at pin widget 27 (2 inputs)
KERN: hda:     try widget 12: 0xffffffff821d4eb8
KERN: hda:     widget 12 is candidate
KERN: hda:     try widget 13: 0xffffffff821d4f64
KERN: hda:     widget 13 is candidate
KERN: hda:   look at pin widget 30 (1 inputs)
KERN: hda:     try widget 6: 0xffffffff821d4ab0
KERN: hda:   look at pin widget 33 (2 inputs)
KERN: hda:     try widget 12: 0xffffffff821d4eb8
KERN: hda:     widget 12 is candidate
KERN: hda:     add pin widget 33
KERN: hda: build input tree
KERN: hda:   look at input widget 8 (1 inputs)
KERN: hda:     try widget 35: 0xffffffff821d5e2c
KERN: hda:     widget 35 is candidate
KERN: hda:         input: added input widget 24
KERN: hda:       input: added mixer/selector widget 35
KERN: hda:         input: added input widget 25
KERN: hda:       input: added mixer/selector widget 35
KERN: hda:         input: not added mixer/selector widget 11
KERN: hda:     add pin widget 8
KERN: hda:   look at input widget 9 (1 inputs)
KERN: hda:     try widget 34: 0xffffffff821d5d80
KERN: hda:     widget 34 is candidate
KERN: hda:         input: not added mixer/selector widget 11
KERN: hda:       input: not added mixer/selector widget 34
KERN: hda: build tree!
KERN: hda: 	Audiogroup:
KERN: hda: 2: Audio output
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87
KERN: hda: 3: Audio output
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87
KERN: hda: 4: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 5: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 6: Audio output
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Digital] [Format override] [Stereo] 
KERN: hda: 7: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 8: Audio input
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11
KERN: hda: 	Inputs: <35> 
KERN: hda: 9: Audio input
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11
KERN: hda: 	Inputs: <34> 
KERN: hda: 10: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 11: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
KERN: hda: 	Inputs: <24> 25 26 27 29 
KERN: hda: 12: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <2> 11 
KERN: hda: 13: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <3> 11 
KERN: hda: 14: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 15: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <2> 11 
KERN: hda: 16: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 17: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 18: Pin complex
KERN: hda: 	[Input]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 19: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 20: Pin complex
KERN: hda: 	[Pres Detect][Output][EAPD]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <12> 13 
KERN: hda: 21: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 22: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 23: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [Out amplifier] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <15> 
KERN: hda: 24: Pin complex
KERN: hda: 	[Pres Detect][Output][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <13> 
KERN: hda: 25: Pin complex
KERN: hda: 	[Pres Detect][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Unsol. responses] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 26: Pin complex
KERN: hda: 	[Pres Detect][HP Drive][Output][Input]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 <13> 
KERN: hda: 27: Pin complex
KERN: hda: 	[Pres Detect][Output][Input]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <12> 13 
KERN: hda: 28: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 29: Pin complex
KERN: hda: 	[Input]
KERN: hda: 	Supported power states: D0 
KERN: hda: 30: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Digital] [Conn. list] [Unsol. responses] [Stereo] 
KERN: hda: 	Inputs: <6> 
KERN: hda: 31: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 32: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 	[Proc widget] 
KERN: hda: 33: Pin complex
KERN: hda: 	[Pres Detect][HP Drive][Output]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <12> 13 
KERN: hda: 34: Audio selector
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	Inputs: <24> 25 26 27 29 11 18 
KERN: hda: 35: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <24> 25 26 27 29 11 
KERN: hda: Enabled unsolicited responses on widget 24
KERN: hda: Enabled unsolicited responses on widget 33
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 2 (offset 87)
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 3 (offset 87)
KERN: hda: UNMUTE/SET INPUT GAIN widget 12 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 13 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 15 (offset 0)
KERN: hda: ENABLE pin widget 20
KERN: hda: ENABLE EAPD pin widget 20
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 20 (offset 0)
KERN: hda: ENABLE pin widget 23
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 23 (offset 0)
KERN: hda: ENABLE pin widget 26
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 26 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 26 (offset 0)
KERN: hda: ENABLE pin widget 33
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 33 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 8 (offset 11)
KERN: hda: input vref 50 enabled
KERN: hda: input vref 80 enabled
KERN: hda: ENABLE pin widget 24
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 24 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 24 (offset 0)
KERN: hda: input vref 50 enabled
KERN: hda: input vref 80 enabled
KERN: hda: ENABLE pin widget 25
KERN: hda: UNMUTE/SET INPUT GAIN widget 25 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 35 (offset 0)
KERN: hda: streams playback 0xffffffff96243a50, record 0xffffffff96243910
KERN: hda: sensed pin widget 33, 0
KERN: hda: Codec 0 Vendor: 10ec Product: 0269 Subsystem: 10431ac3, Revision: 1.0.1.0 Quirks: 0700
KERN: hda: Audio Group: Output delay: 4 samples, Input delay: 0 samples, Beep Generator: no
KERN: hda:   #GPIO: 0, #GPO: 0, #GPI: 0, unsol: no, wake: no
KERN: hda: 	Supported formats: 
KERN: hda: 	Supported rates: 
KERN: hda:   widget start 2, count 7
KERN: hda: 2: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 32bits bitstream 
KERN: hda: 	Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz 
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 3: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 32bits bitstream 
KERN: hda: 	Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz 
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 4: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 32bits bitstream 
KERN: hda: 	Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz 
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 5: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, HDMI Digital other out, Other digital, N/A, Association:1
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <2> 
KERN: hda: 6: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Jack, HDMI Digital other out, Other digital, N/A, Association:2
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <3> 
KERN: hda: 7: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, HDMI Digital other out, Other digital, N/A, Association:3
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: ps2: probe_mouse Standard PS/2 mouse found
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: ps2: devfs_publish_device input/mouse/ps2/standard_3, status = 0x00000000
KERN: hda: 	Inputs: <4> 
KERN: ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000
KERN: hda: 8: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: build output tree: use mixer
KERN: hda:   look at pin widget 5 (1 inputs)
KERN: hda:     try widget 2: 0xffffffff962de148
KERN: hda:   look at pin widget 6 (1 inputs)
KERN: hda:     try widget 3: 0xffffffff962de1f4
KERN: hda:   look at pin widget 7 (1 inputs)
KERN: hda:     try widget 4: 0xffffffff962de2a0
KERN: hda: try without mixer!
KERN: hda: build output tree: don't use mixer
KERN: hda:   look at pin widget 5 (1 inputs)
KERN: hda:     try widget 2: 0xffffffff962de148
KERN: hda:     widget 2 is candidate
KERN: hda:       output: added output widget 2
KERN: hda:     add pin widget 5
KERN: hda:   look at pin widget 6 (1 inputs)
KERN: hda:     try widget 3: 0xffffffff962de1f4
KERN: hda:     widget 3 is candidate
KERN: hda:       output: added output widget 3
KERN: hda:     add pin widget 6
KERN: hda:   look at pin widget 7 (1 inputs)
KERN: hda:     try widget 4: 0xffffffff962de2a0
KERN: hda:     widget 4 is candidate
KERN: hda:       output: added output widget 4
KERN: hda:     add pin widget 7
KERN: hda: build input tree
KERN: hda: build input tree failed
KERN: hda: build tree!
KERN: hda: 	Audiogroup:
KERN: hda: 2: Audio output
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 3: Audio output
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 4: Audio output
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 5: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <2> 
KERN: hda: 6: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <3> 
KERN: hda: 7: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <4> 
KERN: hda: 8: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: Enabled unsolicited responses on widget 5
KERN: hda: Enabled unsolicited responses on widget 6
KERN: hda: Enabled unsolicited responses on widget 7
KERN: hda: ENABLE pin widget 5
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 5 (offset 0)
KERN: hda: ENABLE pin widget 6
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 6 (offset 0)
KERN: hda: ENABLE pin widget 7
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 7 (offset 0)
KERN: hda: hda_audio_group_get_widgets failed for playback stream
KERN: hda: hda_audio_group_get_widgets failed for record stream
KERN: hda: streams playback 0x0000000000000000, record 0x0000000000000000
KERN: hda: Failed to setup new audio function group (No such device)!
KERN: looking for settings file
KERN: hda: sample size 4, num channels 2, buffer length 10240
KERN: hda: hda_stream_setup_buffers: setup stream 1: SR=192000, SF=24 F=0x1831 (0x100)
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 163840 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 1 fifo size: 1536 num_io_widgets: 2
KERN: hda: widgets: KERN: 2 KERN: 3 
KERN: hda: sample size 4, num channels 2, buffer length 10240
KERN: hda: hda_stream_setup_buffers: setup stream 2: SR=192000, SF=24 F=0x1831 (0x100)
USER: Notify of added/removed/started/stopped device
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 163840 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 2 fifo size: 1536 num_io_widgets: 1
KERN: hda: widgets: 8 
KERN: hda: sample size 4, num channels 2, buffer length 10240
KERN: hda: hda_stream_setup_buffers: setup stream 1: SR=192000, SF=24 F=0x1831 (0x100)
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 163840 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 1 fifo size: 1536 num_io_widgets: 2
KERN: hda: widgets: KERN: 2 KERN: 3 
KERN: hda: sample size 4, num channels 2, buffer length 6144
KERN: hda: hda_stream_setup_buffers: setup stream 2: SR=96000, SF=24 F=0x831 (0x100)
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 98304 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 2 fifo size: 768 num_io_widgets: 1
KERN: hda: widgets: KERN: 8 
KERN: hda_stream_start() offset 80
KERN: hda_stream_start() offset 0
KERN: ps2: keyboard found
USER: Notify of added/removed/started/stopped device
KERN: options = 0
KERN: No APM available.
KERN: smp: using ACPI to detect MP configuration
KERN: smp: local apic address is 0xfee00000
KERN: smp: found local APIC with id 0
KERN: smp: found local APIC with id 2
KERN: smp: found local APIC with id 1
KERN: smp: found local APIC with id 3
KERN: smp: found local APIC with id 4
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 5
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 6
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 7
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 8
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 9
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 10
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 11
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 12
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 13
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 14
KERN: smp: APIC is disabled and will not be used
KERN: smp: found local APIC with id 15
KERN: smp: APIC is disabled and will not be used
KERN: smp: found io APIC with id 2 and address 0xfec00000
KERN: VESA version = 3.0, capabilities 1
KERN: OEM string: Intel(R)Sandybridge Mobile Graphics Chipset Accelerated VGA BIOS
KERN:  0x160: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x161: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x162: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x163: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x164: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x165: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x166: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x167: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x168: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x169: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x16a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x16b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x16c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x16d: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x16e: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x16f: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x170: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x171: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x13c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x14d: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x15c: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x13a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x14b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x15a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x107: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x11a: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x11b: 0 x 0 x 0 (a = 0, mem = 0, phy = 0, p = 0, b = 0)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x105: 1024 x 768 x 8 (a = 155, mem = 4, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x117: 1024 x 768 x 16 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
KERN:  0x118: 1024 x 768 x 32 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
KERN:  0x112: 640 x 480 x 32 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
KERN:  0x114: 800 x 600 x 16 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
KERN:  0x115: 800 x 600 x 32 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 8 16 g: 8 8 b: 8 0 dcmi: 0
KERN:  0x101: 640 x 480 x 8 (a = 155, mem = 4, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x103: 800 x 600 x 8 (a = 155, mem = 4, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 0 0 g: 0 0 b: 0 0 dcmi: 0
KERN:  0x111: 640 x 480 x 16 (a = 155, mem = 6, phy = b0000000, p = 1, b = 1)
KERN: 	mask: r: 5 11 g: 6 5 b: 5 0 dcmi: 0
KERN: Using mode 0x118
KERN: VESA compatible graphics!
KERN: EDID1: 4f
KERN: EDID2: ebx 102
KERN: EDID3: 4f
KERN: EDID info:
KERN:   EDID version: 1.3
KERN:   Vendor: LGD Product ID: 0x2dc
KERN:   Serial #: 0
KERN:   Produced in week/year: 0/2010
KERN:   Type: Digital
KERN:   Size: 34 cm x 19 cm
KERN:   Gamma=2.2
KERN:   Red (X,Y)=(0.623,0.369)
KERN:   Green (X,Y)=(0.345,0.61)
KERN:   Blue (X,Y)=(0.148,0.97)
KERN:   White (X,Y)=(0.313,0.329)
KERN: Supported Future Video Modes:
KERN: Supported VESA Video Modes:
KERN: Additional Video Mode (1366x768@59Hz):
KERN: clock=70 MHz
KERN: h: (1366, 1402, 1450, 1492)
KERN: v: (768, 771, 776, 782)
KERN: size: 34.399 cm x 19.399 cm
KERN: border: 0 cm x 0 cm
KERN: Ascii Data: LG Display
KERN: Ascii Data: LP156WH4-TLA1
KERN: Welcome to the Haiku boot loader!
KERN: Haiku revision: hrev57740
KERN: number of drives: 2
KERN: add_partitions_for(0x00105258, mountFS = no)
KERN: add_partitions_for(fd = 0, mountFS = no)
KERN: 0x00105480 Partition::Partition
KERN: 0x00105480 Partition::Scan()
KERN: check for partitioning_system: GUID Partition Map
KERN: check for partitioning_system: Intel Partition Map
KERN:   priority: 810
KERN: check for partitioning_system: Intel Extended Partition
KERN: 0x00105600 Partition::Partition
KERN: 0x00105480 Partition::AddChild 0x00105600
KERN: 0x00105600 Partition::SetParent 0x00105480
KERN: new child partition!
KERN: 0x001056c8 Partition::Partition
KERN: 0x00105480 Partition::AddChild 0x001056c8
KERN: 0x001056c8 Partition::SetParent 0x00105480
KERN: new child partition!
KERN: 0x00105790 Partition::Partition
KERN: 0x00105480 Partition::AddChild 0x00105790
KERN: 0x00105790 Partition::SetParent 0x00105480
KERN: new child partition!
KERN: 0x00105480 Partition::Scan(): scan child 0x00105600 (start = 6291456, size = 629145600, parent = 0x00105480)!
KERN: 0x00105600 Partition::Scan()
KERN: check for partitioning_system: GUID Partition Map
KERN: check for partitioning_system: Intel Partition Map
KERN: check for partitioning_system: Intel Extended Partition
KERN: 0x00105480 Partition::Scan(): scan child 0x001056c8 (start = 635437056, size = 2949120, parent = 0x00105480)!
KERN: 0x001056c8 Partition::Scan()
KERN: check for partitioning_system: GUID Partition Map
KERN: check for partitioning_system: Intel Partition Map
KERN: check for partitioning_system: Intel Extended Partition
KERN: 0x00105480 Partition::Scan(): scan child 0x00105790 (start = 638386176, size = 7365197824, parent = 0x00105480)!
KERN: 0x00105790 Partition::Scan()
KERN: check for partitioning_system: GUID Partition Map
KERN: check for partitioning_system: Intel Partition Map
KERN: check for partitioning_system: Intel Extended Partition
KERN: 0x00105480 Partition::~Partition
KERN: 0x00105600 Partition::SetParent 0x00000000
KERN: 0x001056c8 Partition::SetParent 0x00000000
KERN: 0x00105790 Partition::SetParent 0x00000000
KERN: boot partition offset: 638386176
KERN: 0x00105790 Partition::_Mount check for file_system: BFS Filesystem
KERN: PackageVolumeInfo::SetTo()
KERN: load kernel kernel_x86_64...
KERN: video mode: 1024x768x32
KERN: ucode_load: system/non-packaged/data/firmware/intel-ucode/06-2a-07
KERN: ucode_load: couldn't find microcode
KERN: maximum boot loader heap usage: 599696, currently used: 588776
KERN: smp: found 4 cpus
KERN: smp: apic_phys = 0xfee00000
KERN: smp: ioapic_phys = 0xfec00000
KERN: smp: apic (mapped) = 0x81bd9000
KERN: APIC ticks/sec = 99792730
KERN: GDT at 0x5ee80
KERN: phys memory ranges:
KERN:     base 0x0000000000100000, length 0x000000001ff00000
KERN:     base 0x0000000020200000, length 0x000000001fe00000
KERN:     base 0x0000000040200000, length 0x000000006aae4000
KERN:     base 0x00000000aadb8000, length 0x0000000000010000
KERN:     base 0x00000000aade8000, length 0x0000000000132000
KERN:     base 0x00000000aafe8000, length 0x0000000000015KERN: 000
KERN:     base 0x0000000100000000, length 0x000000014fe00000
KERN: allocated phys memory ranges:
KERN:     base 0x0000000000100000, length 0x0000000007007000
KERN: allocated virt memory ranges:
KERN:     base 0xffffffff80000000, length 0x0000000001be7000
KERN: kernel args ranges:
KERN:     base 0xffffffff81109000, length 0x000000000006d000
KERN:     base 0xffffffff81476000, length 0x000000000002e000
KERN:     base 0xffffffff814f0000, length 0x0000000000010000
KERN:     base 0xffffffff81557000, length 0x0000000000010000
KERN:     base 0xffffffff81576000, length 0x0000000000010000
KERN:     base 0xffffffff81652000, length 0x000000000002e000
KERN:     base 0xffffffff818ba000, length 0x0000000000010000
KERN:     base 0xffffffff81908000, length 0x0000000000010000
KERN:     base 0xffffffff8195e000, length 0x0000000000010000
KERN:     base 0xffffffff819a4000, length 0x0000000000010000
KERN:     base 0xffffffff819ef000, length 0x0000000000010000
KERN:     base 0xffffffff81a34000, length 0x0000000000010000
KERN:     base 0xffffffff81ad4000, length 0x0000000000010000
KERN:     base 0xffffffff81b17000, length 0x000000000000d000
KERN:     base 0xffffffff81b39000, length 0x0000000000010000
KERN:     base 0xffffffff81b6d000, length 0x0000000000010000
KERN:     base 0xffffffff81bc6000, length 0x0000000000009000
KERN: kernel entry at 0xffffffff800664b0
KERN: trampolining other cpus
KERN: wait for delivery
KERN: deassert INIT
KERN: wait for delivery
KERN: num startups = 2
KERN: send STARTUP
KERN: wait for delivery
KERN: send STARTUP
KERN: wait for delivery
Last message repeated 1 time
KERN: deassert INIT
KERN: wait for delivery
KERN: num startups = 2
KERN: send STARTUP
KERN: wait for delivery
KERN: send STARTUP
KERN: wait for delivery
Last message repeated 1 time
KERN: deassert INIT
KERN: wait for delivery
KERN: num startups = 2
KERN: send STARTUP
KERN: wait for delivery
KERN: send STARTUP
KERN: wait for delivery
KERN: done trampolining
KERN: Welcome to kernel debugger output!
KERN: Haiku revision: hrev57740, debug level: 2
KERN: CPU: no microcode provided
KERN: CPU 0: type 0 family 6 extended_family 0 model 10 extended_model 2 stepping 7, string 'GenuineIntel'
KERN: CPU 0: vendor 'Intel' model name 'Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz'
KERN: CPU 0: apic id 0, package 0, core 0, smt 0
KERN: CPU 0: cache sharing: L1 id 0, L2 id 0, L3 id 0
KERN: CPU 0: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline xsave avx syscall nx long dts arat pln ecmd ptm aperfmperf epb xsaveopt 
KERN: CPU 0: patch_level 0x6
KERN: reserve_io_interrupt_vectors: reserved 16 vectors starting from 0
KERN: mark_page_range_in_use(0x0, 0x100): start page is before free list
KERN: mark_page_range_in_use(0x0, 0xa0): start page is before free list
KERN: Welcome to syslog debug output!
KERN: Haiku revision: hrev57740
KERN: mapping local apic at 0xffffffff81bd9000
KERN: arch_altcodepatch_replace found 2 altcodepatches for tag 3
KERN: arch_altcodepatch_replace found 4 altcodepatches for tag 4
KERN: enable XSAVE 0x7 832
KERN: CPU 2: type 0 family 6 extended_family 0 model 10 extended_model 2 stepping 7, string 'GenuineIntel'
KERN: CPU 3: type 0 family 6 extended_family 0 model 10 extended_model 2 stepping 7, string 'GenuineIntel'
KERN: CPU 1: type 0 family 6 extended_family 0 model 10 extended_model 2 stepping 7, string 'GenuineIntel'
KERN: CPU 3: vendor 'Intel' model name 'Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz'
KERN: CPU 1: vendor 'Intel' model name 'Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz'
KERN: CPU 3: apic id 3, package 0, core 1, smt 1
KERN: CPU 2: vendor 'Intel' model name 'Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz'
KERN: CPU 3: cache sharing: L1 id 2, L2 id 2, L3 id 0
KERN: CPU 1: apic id 2, package 0, core 1, smt 0
KERN: CPU 3: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline xsave osxsave avx syscall nx long dts arat pln ecmd ptm aperfmperf epb xsaveopt 
KERN: CPU 3: patch_level 0x6
KERN: CPU 1: cache sharing: L1 id 2, L2 id 2, L3 id 0
KERN: CPU 2: apic id 1, package 0, core 0, smt 1
KERN: CPU 1: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline xsave osxsave avx syscall nx long dts arat pln ecmd ptm aperfmperf epb xsaveopt 
KERN: CPU 1: patch_level 0x6
KERN: CPU 2: cache sharing: L1 id 0, L2 id 0, L3 id 0
KERN: CPU 2: features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clfsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor dscpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tscdeadline xsave osxsave avx syscall nx long dts arat pln ecmd ptm aperfmperf epb xsaveopt 
KERN: CPU 2: patch_level 0x6
KERN: setting up apic for CPU 0: apic id 0, version 17170453
KERN: CPU 0: logical apic id: 0x1
KERN: x86_init_fpu: CPU has SSE... enabling FXSR and XMM.
KERN: reserve_io_interrupt_vectors: reserved 3 vectors starting from 221
KERN: reserve_io_interrupt_vectors: reserved 1 vectors starting from 219
KERN: arch_init_timer: using APIC timer.
KERN: allocate_commpage_entry(2, 16) -> 0x0000000000000200
KERN: scheduler_init: found 4 logical cpus and 3 cache levels
KERN: scheduler switches: single core: false, cpu load tracking: false, core load tracking: true
KERN: scheduler: switching to low latency mode
KERN: msi support enabled
KERN: setting up apic for CPU 2: apic id 1, version 17170453
KERN: setting up apic for CPU 3: apic id 3, version 17170453
KERN: setting up apic for CPU 1: apic id 2, version 17170453
KERN: CPU 3: logical apic id: 0x8
KERN: CPU 1: logical apic id: 0x2
KERN: x86_init_fpu: CPU has SSE... enabling FXSR and XMM.
Last message repeated 1 time
KERN: CPU 2: logical apic id: 0x4
KERN: x86_init_fpu: CPU has SSE... enabling FXSR and XMM.
KERN: allocate_commpage_entry(3, 69) -> 0x0000000000000210
KERN: slab memory manager: created area 0xffffffff80801000 (162)
KERN: PCI: pci_module_init
KERN: ACPI: RSDP 0x00000000000F0430 000024 (v02 _ASUS_)
KERN: ACPI: XSDT 0x00000000AAFFEE18 000064 (v01 _ASUS_ NoteBook 06222004 MSFT 00010013)
KERN: ACPI: FACP 0x00000000AAF9BD98 0000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
KERN: ACPI: DSDT 0x00000000AAF7C018 00D3C8 (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
KERN: ACPI: FACS 0x00000000AAFE5E40 000040
KERN: ACPI: FACS 0x00000000AAFE5D40 000040
KERN: ACPI: APIC 0x00000000AAFFDF18 0000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
KERN: ACPI: HPET 0x00000000AAFE6D18 000038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
KERN: ACPI: ECDT 0x00000000AAFE5B18 0000C1 (v01 _ASUS_ NoteBook 06222004 AMI  00000000)
KERN: ACPI: MCFG 0x00000000AAFE6C98 00003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
KERN: ACPI: SSDT 0x00000000AAF7B018 000925 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
KERN: ACPI: SSDT 0x00000000AAF7A018 000996 (v01 PmRef  CpuPm    00003000 INTL 20091112)
KERN: ACPI: SSDT 0x00000000AAF5FA98 0002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
KERN: ACPI: Forced DSDT copy: length 0x0D3C8 copied locally, original unmapped
KERN: ACPI: 4 ACPI AML tables successfully acquired and loaded
KERN: ACPI: Enabled 11 GPEs in block 00 to 3F
KERN: publish device: node 0xffffffff8217e780, path acpi/namespace, module bus_managers/acpi/namespace/device_v1
KERN: publish device: node 0xffffffff8217e780, path acpi/call, module bus_managers/acpi/call/device_v1
KERN: registering power button
KERN: publish device: node 0xffffffff8275c3c8, path power/embedded_controller/0, module drivers/power/acpi_embedded_controller/device_v1
KERN: slab memory manager: created area 0xffffffff8f801000 (406)
KERN: initialize PCI controller from ACPI
KERN: PCI: range from ACPI [0(1),3e(1)] with length 3f
KERN: PCI: range from ACPI [0(1),cf7(1)] with length cf8
KERN: PCI: range from ACPI [d00(1),ffff(1)] with length f300
KERN: PCI: range from ACPI [a0000(1),bffff(1)] with length 20000
KERN: PCI: range from ACPI [c0000(1),c3fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [c4000(1),c7fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [c8000(1),cbfff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [cc000(1),cffff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [d0000(1),d3fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [d4000(1),d7fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [d8000(1),dbKERN: fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [dc000(1),dffff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [e0000(1),e3fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [e4000(1),e7fff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [e8000(1),ebfff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [ec000(1),effff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [f0000(1),fffff(1)] with length 0
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [fff00000(1),feafffff(1)] with length fec00000
KERN: PCI: Fixup invalid length from ACPI!
KERN: PCI: range from ACPI [fed40000(1),fed44fff(1)] with length 5000
KERN: PCI: mechanism addr: e0000000, seg: 0, start: 0, end: 3f
KERN: PCI: FixupDevices: checking bus 1 behind 8086:0101
KERN: PCI: FixupDevices: checking bus 2 behind 8086:1c10
KERN: PCI: FixupDevices: checking bus 3 behind 8086:1c12
KERN: PCI: FixupDevices: checking bus 4 behind 8086:1c1a
KERN: PCI: dom 0, bus 0, dev  1, func 0, changed PCI bridge control from 0x0010 to 0x0013
KERN: PCI: dom 0, bus 0, dev 28, func 0, changed PCI bridge control from 0x0010 to 0x0013
KERN: PCI: dom 0, bus 0, dev 28, func 1, changed PCI bridge control from 0x0010 to 0x0013
KERN: PCI: dom 0, bus 0, dev 28, func 5, changed PCI bridge control from 0x0010 to 0x0013
KERN: found io-apic with address 0xfec00000, global interrupt base 0, apic-id 2
KERN: mapping io-apic 0 at physical address 0xfec00000
KERN: io-apic 0 has range 0-23, 24 entries, version 0x00170020, apic-id 2
KERN: setting ACPI interrupt model to APIC
KERN: IRQ routing table with 13 entries
KERN: address 0x1ffff; pin 0; GSI 17; pci 0:1 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06
KERN: address 0x1fffff; pin 1; GSI 19; pci 0:31 pin 2 func mask 4; bios irq: 5; gsi 19; config 0x06
KERN: address 0x1fffff; pin 2; GSI 18; pci 0:31 pin 3 func mask 8; bios irq: 3; gsi 18; config 0x06
KERN: address 0x1dffff; pin 0; GSI 23; pci 0:29 pin 1 func mask 1; bios irq: 5; gsi 23; config 0x06
KERN: address 0x1affff; pin 0; GSI 16; pci 0:26 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: address 0x1bffff; pin 0; GSI 22; pci 0:27 pin 1 func mask 1; bios irq: 5; gsi 22; config 0x06
KERN: address 0x1cffff; pin 0; GSI 16; pci 0:28 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: address 0x1cffff; pin 1; GSI 17; pci 0:28 pin 2 func mask 22; bios irq: 11; gsi 17; config 0x06
KERN: address 0x16ffff; pin 0; GSI 16; pci 0:22 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: address 0x2ffff; pin 0; GSI 16; pci 0:2 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: address 0xffff; pin 0; GSI 17; pci 3:0 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06
KERN: address 0xffff; pin 0; GSI 17; pci 4:0 pin 1 func mask 1; bios irq: 11; gsi 17; config 0x06
KERN: address 0xffff; pin 0; GSI 16; pci 1:0 pin 1 func mask 1; bios irq: 10; gsi 16; config 0x06
KERN: found interrupt override for bus 0, source irq 0, global irq 2, flags 0x00000000
KERN: found interrupt override for bus 0, source irq 9, global irq 9, flags 0x0000000d
KERN: free_io_interrupt_vectors: freeing 16 vectors starting from 0
KERN: reserve_io_interrupt_vectors: reserved 24 vectors starting from 0
KERN: using io-apics for interrupt routing
KERN: PCI: [dom 0, bus  0] bus   0, device  0, function  0: vendor 8086, device 0104, revision 09
KERN: PCI:   class_base 06, class_function 00, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 0104: 2nd Generation Core Processor Family DRAM Controller
KERN: PCI:   info: Bridge (Host bridge)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: vendspec
KERN: PCI: [dom 0, bus  0] bus   0, device  1, function  0: vendor 8086, device 0101, revision 09
KERN: PCI:   class_base 06, class_function 04, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 0101: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
KERN: PCI:   info: Bridge (PCI bridge, Normal decode)
KERN: PCI:   line_size 10, latency 00, header_type 81, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0088
KERN: PCI:   primary_bus 00, secondary_bus 01, subordinate_bus 01, secondary_latency 00
KERN: PCI:   I/O window d000-dfff
KERN: PCI:   memory window dc000000-dd0fffff
KERN: PCI:   prefetchable memory window 00000000c0000000-00000000d1ffffff
KERN: PCI:   bridge_control 0013, secondary_status 0000
KERN: PCI:   interrupt_line 11, interrupt_pin 01
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: subvendor, PM, MSI, PCIe
KERN: PCI:   Extended capabilities: Virtual Channel, Root Complex Link Declaration
KERN: PCI: [dom 0, bus  1] bus   1, device  0, function  0: vendor 10de, device 1050, revision a1
KERN: PCI:   class_base 03, class_function 00, class_api 00
KERN: PCI:   vendor 10de: NVIDIA Corporation
KERN: PCI:   device 1050: GF119M [GeForce GT 520M]
KERN: PCI:   info: Display controller (VGA compatible controller, VGA controller)
KERN: PCI:   line_size 10, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host dd000000, pci dd000000, size 00080000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1682, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host dc000000, pci dc000000, size 01000000, flags 00
KERN: PCI:   base reg 1: host 00000000c0000000, pci 00000000c0000000, size 10000000, flags 0c 00
KERN: PCI:   base reg 3: host 00000000d0000000, pci 00000000d0000000, size 02000000, flags 0c 00
KERN: PCI:   base reg 5: host 0000d000, pci 0000d000, size 00000080, flags 01
KERN: PCI:   Capabilities: PM, MSI, PCIe, vendspec
KERN: PCI:   Extended capabilities: Virtual Channel, Power Budgeting, Vendor Unique
KERN: PCI: [dom 0, bus  0] bus   0, device  2, function  0: vendor 8086, device 0116, revision 09
KERN: PCI:   class_base 03, class_function 00, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 0116: 2nd Generation Core Processor Family Integrated Graphics Controller
KERN: PCI:   info: Display controller (VGA compatible controller, VGA controller)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1682, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000dd400000, pci 00000000dd400000, size 00400000, flags 04 00
KERN: PCI:   base reg 2: host 00000000b0000000, pci 00000000b0000000, size 10000000, flags 0c 00
KERN: PCI:   base reg 4: host 0000e000, pci 0000e000, size 00000040, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: MSI, PM, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 22, function  0: vendor 8086, device 1c3a, revision 04
KERN: PCI:   class_base 07, class_function 80, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c3a: 6 Series/C200 Series Chipset Family MEI Controller #1
KERN: PCI:   info: Communication controller
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000df60a000, pci 00000000df60a000, size 00000010, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   baKERN: se reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI
KERN: PCI: [dom 0, bus  0] bus   0, device 26, function  0: vendor 8086, device 1c2d, revision 05
KERN: PCI:   class_base 0c, class_function 03, class_api 20
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c2d: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
KERN: PCI:   info: Serial bus controller (USB controller, EHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 10, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host df608000, pci df608000, size 00000400, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, DebugPort, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 27, function  0: vendor 8086, device 1c20, revision 05
KERN: PCI:   class_base 04, class_function 03, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c20: 6 Series/C200 Series Chipset Family High Definition Audio Controller
KERN: PCI:   info: Multimedia controller (Audio device)
KERN: PCI:   line_size 10, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1ac3, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 16, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000df600000, pci 00000000df600000, size 00004000, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI, PCIe
KERN: PCI:   Extended capabilities: Virtual Channel, Root Complex Link Declaration
KERN: PCI: [dom 0, bus  0] bus   0, device 28, function  0: vendor 8086, device 1c10, revision b5
KERN: PCI:   class_base 06, class_function 04, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c10: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
KERN: PCI:   info: Bridge (PCI bridge, Normal decode)
KERN: PCI:   line_size 10, latency 00, header_type 81, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0040
KERN: PCI:   primary_bus 00, secondary_bus 02, subordinate_bus 02, secondary_latency 00
KERN: PCI:   I/O window c000-cfff
KERN: PCI:   memory window dec00000-df5fffff
KERN: PCI:   prefetchable memory window 00000000d3700000-00000000d40fffff
KERN: PCI:   bridge_control 0013, secondary_status 2000
KERN: PCI:   interrupt_line 10, interrupt_pin 01
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PCIe, MSI, subvendor, PM
KERN: PCI:   Extended capabilities: (empty list)
KERN: PCI: [dom 0, bus  0] bus   0, device 28, function  1: vendor 8086, device 1c12, revision b5
KERN: PCI:   class_base 06, class_function 04, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c12: 6 Series/C200 Series Chipset Family PCI Express Root Port 2
KERN: PCI:   info: Bridge (PCI bridge, Normal decode)
KERN: PCI:   line_size 10, latency 00, header_type 81, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0040
KERN: PCI:   primary_bus 00, secondary_bus 03, subordinate_bus 03, secondary_latency 00
KERN: PCI:   I/O window b000-bfff
KERN: PCI:   memory window de200000-debfffff
KERN: PCI:   prefetchable memory window 00000000d2c00000-00000000d35fffff
KERN: PCI:   bridge_control 0013, secondary_status 0000
KERN: PCI:   interrupt_line 11, interrupt_pin 02
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PCIe, MSI, subvendor, PM
KERN: PCI:   Extended capabilities: (empty list)
KERN: PCI: [dom 0, bus  3] bus   3, device  0, function  0: vendor 168c, device 002b, revision 01
KERN: PCI:   class_base 02, class_function 80, class_api 00
KERN: PCI:   vendor 168c: Qualcomm Atheros
KERN: PCI:   device 002b: AR9285 Wireless Network Adapter (PCI-Express) (AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card)
KERN: PCI:   info: Network controller
KERN: PCI:   line_size 10, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1089, subsystem_vendor_id 1a3b
KERN: PCI:   interrupt_line 11, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000de200000, pci 00000000de200000, size 00010000, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, MSI, PCIe
KERN: PCI:   Extended capabilities: Advanced Error Reporting, Virtual Channel, Serial Number, Power Budgeting
KERN: PCI: [dom 0, bus  0] bus   0, device 28, function  5: vendor 8086, device 1c1a, revision b5
KERN: PCI:   class_base 06, class_function 04, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c1a: 6 Series/C200 Series Chipset Family PCI Express Root Port 6
KERN: PCI:   info: Bridge (PCI bridge, Normal decode)
KERN: PCI:   line_size 10, latency 00, header_type 81, BIST 00
KERN: PCI:   subsystem_id 0000, subsystem_vendor_id 0040
KERN: PCI:   primary_bus 00, secondary_bus 04, subordinate_bus 04, secondary_latency 00
KERN: PCI:   I/O window a000-afff
KERN: PCI:   memory window dd800000-de1fffff
KERN: PCI:   prefetchable memory window 00000000d2100000-00000000d2afffff
KERN: PCI:   bridge_control 0013, secondary_status 0000
KERN: PCI:   interrupt_line 11, interrupt_pin 02
KERN: PCI:   ROM base host 00000000, pci 00000000, size ??
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PCIe, MSI, subvendor, PM
KERN: PCI:   Extended capabilities: (empty list)
KERN: PCI: [dom 0, bus  4] bus   4, device  0, function  0: vendor 10ec, device 8168, revision 06
KERN: PCI:   class_base 02, class_function 00, class_api 00
KERN: PCI:   vendor 10ec: Realtek Semiconductor Co., Ltd.
KERN: PCI:   device 8168: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
KERN: PCI:   info: Network controller (Ethernet controller)
KERN: PCI:   line_size 10, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 11, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 0000a000, pci 0000a000, size 00000100, flags 01
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000d2104000, pci 00000000d2104000, size 00001000, flags 0c 00
KERN: PCI:   base reg 4: host 00000000d2100000, pci 00000000d2100000, size 00004000, flags 0c 00
KERN: PCI:   Capabilities: PM, MSI, PCIe, MSI-X, VPD
KERN: PCI:   Extended capabilities: Advanced Error Reporting, Virtual Channel, Serial Number
KERN: PCI: [dom 0, bus  0] bus   0, device 29, function  0: vendor 8086, device 1c26, revision 05
KERN: PCI:   class_base 0c, class_function 03, class_api 20
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c26: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
KERN: PCI:   info: Serial bus controller (USB controller, EHCI)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 17, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host df607000, pci df607000, size 00000400, KERN: flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: PM, DebugPort, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  0: vendor 8086, device 1c49, revision 05
KERN: PCI:   class_base 06, class_function 01, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c49: HM65 Express Chipset LPC Controller
KERN: PCI:   info: Bridge (ISA bridge)
KERN: PCI:   line_size 00, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 00, interrupt_pin 00, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 1: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: vendspec
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  2: vendor 8086, device 1c03, revision 05
KERN: PCI:   class_base 01, class_function 06, class_api 01
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c03: 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller
KERN: PCI:   info: Mass storage controller (SATA controller, AHCI 1.0)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 13, interrupt_pin 02, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 0000e0b0, pci 0000e0b0, size 00000008, flags 01
KERN: PCI:   base reg 1: host 0000e0a0, pci 0000e0a0, size 00000004, flags 01
KERN: PCI:   base reg 2: host 0000e090, pci 0000e090, size 00000008, flags 01
KERN: PCI:   base reg 3: host 0000e080, pci 0000e080, size 00000004, flags 01
KERN: PCI:   base reg 4: host 0000e060, pci 0000e060, size 00000020, flags 01
KERN: PCI:   base reg 5: host df606000, pci df606000, size 00000800, flags 00
KERN: PCI:   Capabilities: MSI, PM, SATA, AdvancedFeatures
KERN: PCI: [dom 0, bus  0] bus   0, device 31, function  3: vendor 8086, device 1c22, revision 05
KERN: PCI:   class_base 0c, class_function 05, class_api 00
KERN: PCI:   vendor 8086: Intel Corporation
KERN: PCI:   device 1c22: 6 Series/C200 Series Chipset Family SMBus Controller
KERN: PCI:   info: Serial bus controller (SMBus)
KERN: PCI:   line_size 00, latency 00, header_type 00, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1277, subsystem_vendor_id 1043
KERN: PCI:   interrupt_line 12, interrupt_pin 03, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00000000df605000, pci 00000000df605000, size 00000100, flags 04 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 0000e040, pci 0000e040, size 00000020, flags 01
KERN: PCI:   base reg 5: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   Capabilities: (not supported)
KERN: usb ehci -1: the host controller is bios owned, claiming ownership
KERN: usb ehci -1: controller is still bios owned, waiting
KERN: usb ehci -1: successfully took ownership of the host controller
KERN: sitd entry size 128, itd entry size 128
KERN: usb ehci -1: successfully started the controller
KERN: usb hub 2: port 0: new device connected
KERN: usb hub 8: port 1: new device connected
KERN: usb hub 8: port 3: new device connected
KERN: usb ehci -1: the host controller is bios owned, claiming ownership
KERN: usb ehci -1: controller is still bios owned, waiting
KERN: usb ehci -1: successfully took ownership of the host controller
KERN: sitd entry size 128, itd entry size 128
KERN: usb ehci -1: successfully started the controller
KERN: usb hub 32: port 0: new device connected
KERN: usb hub 38: port 0: new device connected
KERN: usb hub 38: port 1: new device connected
KERN: usb_disk: device reports a lun count of 1
KERN: usb_disk: vendor_identification    "SanDisk "
KERN: usb_disk: product_identification   "Cruzer Blade    "
KERN: usb_disk: product_revision_level   "1.26"
KERN: publish device: node 0xffffffff808921e8, path disk/usb/0/0/raw, module drivers/disk/usb_disk/device_v1
KERN: [33msdhci:[0m supports_device(vid:8086 pid:1c22)
KERN: get_boot_partitions(): boot volume message:
KERN: KMessage: buffer: 0xffffffff81b79d20 (size/capacity: 347/347), flags: 0xa
KERN:   field: "booted from image" (BOOL): false
KERN:   field: "partition offset"  (LLNG): 638386176 (0x260d0000)
KERN:   field: "packaged"          (BOOL): true
KERN:   field: "boot method"       (LONG): 0 (0x0)
KERN:   field: "boot drive number" (LLNG): 128 (0x80)
KERN:   field: "disk identifier"   (RAWT): data at 0xffffffff81b79e2c, 79 bytes
KERN: get_boot_partitions(): boot method type: 0
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_std_ops(0x1)
KERN: intel: pm_std_ops(0x2)
KERN: dos_std_ops()
Last message repeated 1 time
KERN: ahci: generic AHCI controller found! vendor 0x8086, device 0x1c03
KERN: ahci: ahci_register_device
KERN: ahci: ahci_init_driver
KERN: ahci: ahci_sim_init_bus
KERN: ahci: ahci_sim_init_bus: pciDevice 0xffffffff8089f590
KERN: ahci: AHCIController::Init 0:31:2 vendor 8086, device 1c03
KERN: ahci: PCI SATA capability found at offset 0xa8
KERN: ahci: satacr0 = 0x0010b012, satacr1 = 0x00000048
KERN: ahci: pcicmd old 0x0007
KERN: ahci: pcicmd new 0x0006
KERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 24
KERN: msi_allocate_vectors: allocated 1 vectors starting from 24
KERN: msi enabled: 0x0001
KERN: ahci: using MSI vector 24
KERN: ahci: registers at 0xdf606000, size 0x800
KERN: ahci: mapping physical address 0xdf606000 with 2048 bytes for AHCI HBA regs
KERN: ahci: physical = 0xdf606000, virtual = 0xffffffff8130a000, offset = 0, phyadr = 0xdf606000, mapadr = 0xffffffff8130a000, size = 4096, area = 0x00000399
KERN: ahci: cap: Interface Speed Support: generation 3
KERN: ahci: cap: Number of Command Slots: 32 (raw 0x1f)
KERN: ahci: cap: Number of Ports: 6 (raw 0x5)
KERN: ahci: cap: Supports Port Multiplier: no
KERN: ahci: cap: Supports External SATA: no
KERN: ahci: cap: Enclosure Management Supported: yes
KERN: ahci: cap: FIS-based Switching Control: no
KERN: ahci: cap: Supports Command List Override: yes
KERN: ahci: cap: Supports Staggered Spin-up: no
KERN: ahci: cap: Supports Mechanical Presence Switch: no
KERN: ahci: cap: Supports 64-bit Addressing: yes
KERN: ahci: cap: Supports Native Command Queuing: yes
KERN: ahci: cap: Supports SNotification Register: yes
KERN: ahci: cap: Supports Command List Override: yes
KERN: ahci: cap: Supports AHCI mode only: no
KERN: ahci: cap2: DevSleep Entrance from Slumber Only: no
KERN: ahci: cap2: Supports Aggressive Device Sleep Management: no
KERN: ahci: cap2: Supports Device Sleep: no
KERN: ahci: cap2: Automatic Partial to Slumber Transitions: yes
KERN: ahci: cap2: NVMHCI Present: no
KERN: ahci: cap2: BIOS/OS Handoff: no
KERN: ahci: ghc: AHCI Enable: yes
KERN: ahci: Ports Implemented Mask: 0x000005 Number of Available Ports: 2
KERN: ahci: AHCI Version 0001.03.00 Interrupt 24
KERN: ahci: allocating 4096 bytes for AHCI port 0
KERN: ahci: area = 922, size = 4096, virt = 0xffffffff8130b000, phy = 0x1464f000
KERN: ahci: allocating 4096 bytes for AHCI port 2
KERN: ahci: area = 923, size = 4096, virt = 0xffffffff8130c000, phy = 0x14650000
KERN: ahci: Probe: port 0 link speed 6.0Gb/s
KERN: ahci: Probe: port 2 link speed 1.5Gb/s
KERN: ahci: cookie = 0xffffffff82279600
KERN: ahci: ahci_path_inquiry, cookie 0xffffffff82279600
Last message repeated 1 time
KERN: ahci: ahci_scan_bus, cookie 0xffffffff82279600
KERN: ahci: sg_memcpy phyAddr 0x13557060, size 96
KERN: ahci: ahci_get_restrictions, cookie 0xffffffff82279600
KERN: publish device: node 0xffffffff808a46f0, path disk/scsi/0/0/0/raw, module drivers/disk/scsi/scsi_disk/device_v1
KERN: ahci: ahci_get_restrictions, cookie 0xffffffff82279600
KERN: publish device: node 0xffffffff808a41f0, path disk/scsi/0/2/0/raw, module drivers/disk/scsi/scsi_cd/device_v1
KERN: ahci: sg_memcpy phyAddr 0x13557180, size 32
KERN: vpd_page_get: 
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557090, size 7
KERN: vpd_page_inquiKERN: ry: 
KERN: ahci: sg_memcpy phyAddr 0x13557220, size 8
KERN: vpd_page_get: 
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557090, size 7
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557220, size 64
KERN: periph_check_capacity: TRIM: Setting trim support to UNMAP
KERN: DMAResource@0xffffffff808a4650: low/high 0/100000000, max segment count 32, align 2, boundary 65536, max transfer 130560, max segment size 33554432
KERN: ahci: sg_memcpy phyAddr 0x13557360, size 32
KERN: vpd_page_get: 
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557270, size 7
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557400, size 8
KERN: vpd_page_get: 
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557270, size 7
KERN: vpd_page_inquiry: 
KERN: ahci: sg_memcpy phyAddr 0x13557400, size 64
KERN: periph_check_capacity: TRIM: Setting trim support to UNMAP
KERN: ahci: ahci_ioctl, cookie 0xffffffff82279600
KERN: ahci: Probe: port 2 link speed 1.5Gb/s
KERN: ahci: sata_request::finish ATA command 0xa0 failed: status 0x51, error 0x20
KERN: ahci: sata_request::finish ATAPI packet 25 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 (len 10)
KERN: periph_check_capacity: TRIM: Setting trim support to disabled
KERN: ahci: ahci_ioctl, cookie 0xffffffff82279600
KERN: DMAResource@0xffffffff808ade78: low/high 0/ffffffffffffffff, max segment count 16, align 1, boundary 0, max transfer 65536, max segment size 18446744073709551615
KERN: usb_disk: got device name "SanDisk Cruzer Blade 1.26": No error
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_std_ops(0x1)
KERN: intel: pm_identify_partition(0, 0: 0, 240057409536, 512)
KERN: intel: Found GPT signature, ignoring.
KERN: intel: pm_std_ops(0x2)
KERN: EFI header: EFI PART
KERN: EFI revision: 10000
KERN: header size: 92
KERN: header CRC: cb7c1160
KERN: absolute block: 1
KERN: alternate block: 468862127
KERN: first usable block: 34
KERN: last usable block: 468862094
KERN: disk GUID: 06768128-c07d-8146-8926-29be1448f07b
KERN: entries block: 2
KERN: entry size:  128
KERN: entry count: 128
KERN: entries CRC: b2631575
KERN: EFI header: EFI PART
KERN: EFI revision: 10000
KERN: header size: 92
KERN: header CRC: 4b63582d
KERN: absolute block: 468862127
KERN: alternate block: 1
KERN: first usable block: 34
KERN: last usable block: 468862094
KERN: disk GUID: 06768128-c07d-8146-8926-29be1448f07b
KERN: entries block: 468862095
KERN: entry size:  128
KERN: entry count: 128
KERN: entries CRC: b2631575
KERN: [  0] partition type: 42465331-3ba3-10f1-802a-4861696b7521
KERN:       unique id: 77432b91-183a-614f-a1e4-438bda1e2412
KERN:       start block: 40
KERN:       end block: 468860967
KERN:       size: 228935.999 MB
KERN:       attributes: 0
KERN:       name: HaikuSSD
KERN: identify(0, 0xffffffff8086d5a0)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3193979:    17] invalid superblock!
KERN: raw_command: 
KERN: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
Last message repeated 1 time
KERN: efi_gpt_scan_partition(cookie = 0xffffffff8200d9a0)
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_std_ops(0x1)
KERN: intel: pm_identify_partition(0, 3: 20480, 240056795136, 512)
KERN: intel: pm_std_ops(0x2)
KERN: identify(0, 0xffffffff8086d5a0)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3199603:    17] invalid superblock!
KERN: raw_command: 
KERN: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
Last message repeated 1 time
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_std_ops(0x1)
KERN: intel: pm_identify_partition(0, 2: 0, 8004304896, 512)
KERN: identify(0, 0xffffffff8086d5a0)
KERN: found primary descriptor
KERN:   iso9660_primary_descriptor:
KERN:     volume descriptor type: 1 (primary)
KERN:     standard identifier:    CD001 (valid)
KERN:     version:                1
KERN:     identifier:             'haiku-nightly-x86_64            '
KERN:     size:                   3065
KERN:     set size:               1
KERN:     sequence number:        1
KERN:     logical block size:     2048
KERN:     path table size:        10
KERN:     set identifier:                                     
KERN:     root directory record:
KERN:       length:               34
KERN:       location:             20
KERN:       data length:          2048
KERN:       volume space:         1
KERN: iso9660_info::set_string(0xffffffff8086d5a0 ('<NULL>'), 'haiku-nightly-x86_64            ', 20)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3214826:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
Last message repeated 1 time
KERN: intel: pm_scan_partition(0, 2: 0, 8004304896, 512)
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(0, 6291456, 629145600, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(0, 4: 6291456, 629145600, 512)
KERN: identify(0, 0xffffffff8086d750)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3228952:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
Last message repeated 1 time
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(0, 635437056, 2949120, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(0, 5: 635437056, 2949120, 512)
KERN: identify(0, 0xffffffff8086d750)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3242450:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dos_std_ops()
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(0, 638386176, 7365197824, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(0, 6: 638386176, 7365197824, 512)
KERN: identify(0, 0xffffffff8086d750)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [3258701:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: device 0: /dev/disk/scsi/0/0/0/raw
KERN:   media status:      No error
KERN:   device flags:      2
KERN:   offset:            0
KERN:   size:              240057409536 (228936.585 MB)
KERN:   content size:      240057409536
KERN:   block size:        512
KERN:   physical block size: 512
KERN:   child count:       1
KERN:   index:             -1
KERN:   status:            0
KERN:   flags:             5
KERN:   volume:            -1
KERN:   disk system:       partitioning_systems/efi_gpt/v1
KERN:   name:              KINGSTON  SA400S37240G
KERN:   content name:      <NULL>
KERN:   type:              <NULL>
KERN:   content type:      GUID Partition Map
KERN:   params:            <NULL>
KERN:   content params:    <NULL>
KERN:   partition 3: /dev/disk/scsi/0/0/0/0
KERN:     offset:            20480
KERN:     size:              240056795136 (228936 MB)
KERN:     content size:      240056795136
KERN:     block size:        2048
KERN:     physical block size: 512
KERN:     child count:       0
KERN:     index:             0
KERN:     status:            0
KERN:     flags:             2
KERN:     volume:            -1
KERN:     disk system:       file_systems/bfs/v1
KERN:     name:              HaikuSSD
KERN:     content name:      HaikuSSD
KERN:     type:              Be File System
KERN:     content type:      Be File System
KERN:     params:            <NULL>
KERN:     content params:    <NULL>
KERN: device 1: /dev/disk/scsi/0/2/0/raw
KERN:   media status:      No media present
KERN:   device flags:      5
KERN: device 2: /dev/disk/usb/0/0/raw
KERN:   media status:      No error
KERN:   device flags:      2
KERN:   offset:            0
KERN:   size:              8004304896 (7633.5 MB)
KERN:   content size:      8004304896
KERN:   block size:        512
KERN:   physical block size: 512
KERN:   child count:       3
KERN:   index:             -1
KERN:   status:            0
KERN:   flags:             5
KERN:   volume:            -1
KERN:   disk system:       partitioning_systems/intel/map/v1
KERN:   name:              SanDisk Cruzer Blade 1.26
KERN:   content name:      <NULL>
KERN:   type:              <NULL>
KERN:   content type:      Intel Partition Map
KERN:   params:            <NULL>
KERN:   content params:    <NULL>
KERN:   partition 4: /dev/disk/usb/0/0/0
KERN:     offset:            6291456
KERN:     size:              629145600 (600 MB)
KERN:     content size:      629145600
KERN:     block size:        2048
KERN:     physical block size: 512
KERN:     child count:       0
KERN:     index:             0
KERN:     status:            0
KERN:     flags:         KERN:     2
KERN:     volume:            -1
KERN:     disk system:       file_systems/bfs/v1
KERN:     name:              <NULL>
KERN:     content name:      Haiku
KERN:     type:              Be File System
KERN:     content type:      Be File System
KERN:     params:            type = 235 ; active = 0
KERN:     content params:    <NULL>
KERN:   partition 5: /dev/disk/usb/0/0/1
KERN:     offset:            635437056
KERN:     size:              2949120 (2.812 MB)
KERN:     content size:      2949120
KERN:     block size:        512
KERN:     physical block size: 512
KERN:     child count:       0
KERN:     index:             1
KERN:     status:            0
KERN:     flags:             2
KERN:     volume:            -1
KERN:     disk system:       file_systems/fat/v1
KERN:     name:              <NULL>
KERN:     content name:      haiku esp
KERN:     type:              EFI system data
KERN:     content type:      FAT32 File System
KERN:     params:            type = 239 ; active = 0
KERN:     content params:    <NULL>
KERN:   partition 6: /dev/disk/usb/0/0/2
KERN:     offset:            638386176
KERN:     size:              7365197824 (7024 MB)
KERN:     content size:      7365197824
KERN:     block size:        2048
KERN:     physical block size: 512
KERN:     child count:       0
KERN:     index:             2
KERN:     status:            0
KERN:     flags:             2
KERN:     volume:            -1
KERN:     disk system:       file_systems/bfs/v1
KERN:     name:              <NULL>
KERN:     content name:      HaikuStick
KERN:     type:              Be File System
KERN:     content type:      Be File System
KERN:     params:            type = 235 ; active = 1
KERN:     content params:    <NULL>
KERN: Identified boot partition by partition offset.
KERN: bfs: mounted "HaikuStick" (root node at 524288, device = /dev/disk/usb/0/0/2)
KERN: Mounted boot partition: /dev/disk/usb/0/0/2
KERN: unknown: [3307755:    17] Adding packages from "/boot/system/packages"
KERN: slab memory manager: created area 0xffffffff94001000 (974)
KERN: slab memory manager: created area 0xffffffff94801000 (975)
KERN: slab memory manager: created area 0xffffffff95001000 (977)
KERN: slab memory manager: created area 0xffffffff95801000 (978)
KERN: unknown: [5088720:    17] StringPool usage:
KERN: unknown: [5088923:    17]   total unique strings:       36405,   636998 bytes, overhead: 837315 bytes
KERN: unknown: [5089378:    17]   total strings with dups:   194078,  2504035 bytes
KERN: unknown: [5089727:    17]   unshared strings:            1802
KERN: unknown: [5090003:    17]   bytes saved:              1029722
KERN: unknown: [5098405:    17] Adding packages from "/boot/home/config/packages"
KERN: unknown: [5100452:    17] Failed to open packages activation file: No such file or directory
KERN: unknown: [5100891:    17] Loading packages from activation file failed. Loading all packages in packages directory.
KERN: unknown: [5108785:    17] StringPool usage:
KERN: unknown: [5108988:    17]   total unique strings:       36405,   636998 bytes, overhead: 837315 bytes
KERN: unknown: [5109442:    17]   total strings with dups:   194089,  2504100 bytes
KERN: unknown: [5109792:    17]   unshared strings:            1799
KERN: unknown: [5110078:    17]   bytes saved:              1029787
KERN: module_init_post_boot_device() failed to normalize path of module image 0xffffffff8200f030, "ramfs"
KERN: module_init_post_boot_device() failed to normalize path of module image 0xffffffff8226cf38, "fat"
KERN: module: Search for file_cache/launch_speedup/v1 failed.
KERN: smbios_scan
KERN: found System Information at 0xffffffff80cf7c7a
KERN: found vendor 1 product 2
KERN: smbios_scan found vendor ASUSTeK Computer Inc. product K53SJ
KERN: publish device: node 0xffffffff951f7c00, path disk/virtual/ram/control, module drivers/disk/virtual/ram_disk/control/device_v1
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/zero
KERN: usb_modeswitch: init_hardware()
KERN: usb_modeswitch: init_driver()
KERN: usb_modeswitch: trying module bus_managers/usb/v3.1
KERN: usb_modeswitch: publish_devices()
KERN: usb_modeswitch: uninit_driver()
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/usb_modeswitch
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/tty
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/null
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/dprintf
KERN: con_init: trying module console/frame_buffer/v1
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/console
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(7, 3: 20480, 240056795136, 2048)
KERN: identify(7, 0xffffffff82027f78)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [5350380:    17] invalid superblock!
KERN: raw_command: 
KERN: ahci: AHCIPort::ScsiExecuteRequest port 0 unsupported request opcode 0x43
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(7, 6291456, 629145600, 2048)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(7, 4: 6291456, 629145600, 2048)
KERN: identify(7, 0xffffffff82027f78)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [5366797:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(7, 635437056, 2949120, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(7, 5: 635437056, 2949120, 512)
KERN: identify(7, 0xffffffff82027f78)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [5383667:    17] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: allocate_commpage_entry(4, 16) -> 0x0000000000000258
KERN: using Intel P-States: min 8, max 21, boost 21
KERN: found cpufreq module: power/cpufreq/intel_pstates/v1
KERN: scheduler switches: single core: false, cpu load tracking: true, core load tracking: true
KERN: using Intel C-States: C0, C1, C2, C3, C4
KERN: found cpuidle module: power/cpuidle/intel_cstates/v1
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x80000000, size: 0x80000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x80000000, size: 0x80000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaae00000, size:   0x200000, type: 0
KERN:   mtrr:  1: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  2: base: 0xc0000000, size: 0x40000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaae00000, size:   0x200000, type: 0
KERN:   mtrr:  1: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  2: base: 0xc0000000, size: 0x40000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x80000, type: 0
KERN:   mtrr:  2: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  3: base: 0xc0000000, size: 0x40000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  5: base: 0xc0000000, size: 0x40000000, type: 0
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xb0000000, size: 0x10000000, type: 0
KERN:   mtrr:  5: base: 0xc0000000, size: 0x40000000, type: 0
KERN: kernel debugger extension "debugger/run_on_exit/v1": loaded
KERN: kernel debugger extension "debugger/usb_keyboard/v1": loaded
KERN: kernel debugger extension "debugger/invalidate_on_exit/v1": loaded
KERN: kernel debugger extension "debugger/hangman/v1": loaded
KERN: kernel debugger extension "debugger/disasm/v1": loaded
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: publish device: node 0xffffffff82165ca0, path random, module bus_managers/random/device_v1
KERN: publish device: node 0xffffffff82165ca0, path urandom, module bus_managers/random/device_v1
KERN: publish device: node 0xffffffff82165ac0, path power/button/power_fixed, module drivers/power/acpi_button/devicKERN: e_v1
KERN: publish device: node 0xffffffff821658e0, path power/acpi_battery/0, module drivers/power/acpi_battery/device_v1
KERN: publish device: node 0xffffffff82165340, path power/button/sleep, module drivers/power/acpi_button/device_v1
KERN: [33msdhci:[0m supports_device(vid:8086 pid:1c22)
KERN: package_daemon: [7826399:   692] root at "/boot" (device: 3, node: 524288) registered
KERN: package_daemon: [7826888:   692] volume at "/boot/system" registered
KERN: package_daemon: [7827360:   692] volume at "/boot/home/config" registered
KERN: register_domain(9, unix)
KERN: register_domain(5, internet6)
KERN: register_domain(1, internet)
KERN: unregister_domain(0xffffffff82155480, 9, unix)
KERN: unregister_domain(0xffffffff955d5200, 1, internet)
KERN: slab memory manager: created area 0xffffffff96001000 (9351)
KERN: unregister_domain(0xffffffff82166080, 5, internet6)
KERN: register_domain(5, internet6)
KERN: unregister_domain(0xffffffff82166080, 5, internet6)
KERN: register_domain(4, link)
KERN: register_domain(1, internet)
KERN: register_domain(5, internet6)
KERN: bfs: mounted "Haiku" (root node at 131072, device = /dev/disk/usb/0/0/0)
KERN: Test: and [file_exists [/system/bin/FirstBootPrompt], or [not [file_exists [/boot/home/config/settings/Locale settings]], readonly ]] -> 0
KERN: pci_reserve_device(3, 0, 0, atheroswifi)
KERN: [atheroswifi] (ath) bus_alloc_resource(3, [16], 0x0, 0xffffffffffffffff, 0x1,0x2)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: [atheroswifi] (ath) bus_alloc_resource(1, [0], 0x0, 0xffffffffffffffff, 0x1,0x6)
KERN: [atheroswifi] [ath] AR9285 Main LNA config: LNA2
KERN: [atheroswifi] [ath] AR9285 Alt LNA config: LNA1
KERN: [atheroswifi] [ath] LNA diversity enabled, Diversity enabled
KERN: [atheroswifi] [ath] Enabling diversity for Kite
KERN: [atheroswifi] (ath) RX timestamp: 32 bits
KERN: [atheroswifi] (ath) TX timestamp: 32 bits
KERN: [atheroswifi] (ath) [HT] enabling HT modes
KERN: [atheroswifi] (ath) [HT] 1 stream STBC receive enabled
KERN: [atheroswifi] (ath) [HT] 1 RX streams; 1 TX streams
KERN: ieee80211_sysctl_attach not implemented, yet.
KERN: : [atheroswifi] 11b rates: KERN: 1MbpsKERN:  2MbpsKERN:  5.5Mbps 11MbpsKERN: 
KERN: : KERN: [atheroswifi] 11g rates: KERN: 1MbpsKERN:  2MbpsKERN:  5.5MbpsKERN:  11MbpsKERN:  6MbpsKERN:  9MbpsKERN:  12MbpsKERN:  18MbpsKERN:  24MbpsKERN:  36MbpsKERN:  48MbpsKERN:  54MbpsKERN: 
KERN: : [atheroswifi] 1T1R
KERN: : KERN: [atheroswifi] 11ng MCS 20MHz
KERN: : [atheroswifi] MCS 0-7: 6.5Mbps - 65Mbps
KERN: : KERN: [atheroswifi] 11ng MCS 40MHz:
KERN: : KERN: [atheroswifi] MCS 0-7: 13.5Mbps - 135Mbps
KERN: : KERN: [atheroswifi] 11ng MCS 40MHz SGI:
KERN: : KERN: [atheroswifi] MCS 0-7: 15Mbps - 150Mbps
KERN: [atheroswifi] (ath) AR9285 mac 192.2 RF5133 phy 14.0
KERN: [atheroswifi] (ath) 2GHz radio: 0x0000; 5GHz radio: 0x00c0
KERN: [atheroswifi] (ath) Use hw queue 1 for WME_AC_BE traffic
KERN: [atheroswifi] (ath) Use hw queue 0 for WME_AC_BK traffic
KERN: [atheroswifi] (ath) Use hw queue 2 for WME_AC_VI traffic
KERN: [atheroswifi] (ath) Use hw queue 3 for WME_AC_VO traffic
KERN: [atheroswifi] (ath) Use hw queue 8 for CAB traffic
KERN: [atheroswifi] (ath) Use hw queue 9 for beacons
KERN: [atheroswifi] (ath) using multicast key search
KERN: if_initname(0xffffffff80cc9800, wlan, 18)
KERN: [atheroswifi] atheroswifi: /dev/net/atheroswifi/0
KERN: [net/atheroswifi/0] ieee80211_node_vattach: init 2 auth 12 run 20 probe 2
KERN: [net/atheroswifi/0] ieee80211_vap_attach: STA parent  flags 0x400c2008 flags_ext 0x2
KERN: [net/atheroswifi/0] ieee80211_alloc_node 0xffffffff81ac0000<e0:b9:a5:1e:d4:5e> in station table
KERN: [net/atheroswifi/0] [e0:b9:a5:1e:d4:5e] ieee80211_alloc_node: inact_reload 2
KERN: if_attach 0xffffffff955d9120
KERN: start_wlan: wlan started.
KERN: atheroswifi: init_driver(0xffffffff8f5fe990)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/atheroswifi
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_rndis
KERN: [33musb_davicom:[0m00.08.787:init_driver::ver.0.9.5
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_davicom
KERN: [33musb_asix:[0m00.08.791:init_driver::ver.0.10.1
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_asix
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/pegasus
KERN: etherpci: init_driver KERN: init_driver: etherpci not found
KERN: pci_reserve_device(4, 0, 0, rtl81xx)
KERN: [rtl81xx] (re) bus_alloc_resource(3, [24], 0x0, 0xffffffffffffffff, 0x1,0x2)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: [rtl81xx] (re) MSI count : 1
KERN: [rtl81xx] (re) MSI-X count : 4
KERN: [rtl81xx] (re) bus_alloc_resource(3, [32], 0x0, 0xffffffffffffffff, 0x1,0x2)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 25
KERN: msi_allocate_vectors: allocated 1 vectors starting from 25
KERN: msix configured for 1 vectors
KERN: [rtl81xx] (re) Using 1 MSI-X message
KERN: [rtl81xx] (re) bus_alloc_resource(1, [1], 0x0, 0xffffffffffffffff, 0x1,0x2)
KERN: [rtl81xx] (re) turning off MSI enable bit.
KERN: [rtl81xx] (re) ASPM disabled
KERN: [rtl81xx] (re) Chip rev. 0x2c000000
KERN: [rtl81xx] (re) MAC rev. 0x00200000
KERN: if_initname(0xffffffff80cc5000, re, 18)
KERN: [rtl81xx] rtl81xx: /dev/net/rtl81xx/0
KERN: [rtl81xx] () Found MII: rgephy
KERN: [rtl81xx] () OUI 0x00e04c, model 0x0011, rev. 4
KERN: [rtl81xx] ()  none, 10baseTKERN: , 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
KERN: if_attach 0xffffffff956ca920
KERN: msi-x enabled: 0x8003
KERN: rtl81xx: init_driver(0xffffffff81450110)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/rtl81xx
KERN: [net/atheroswifi/0] compat_open(0x2)
KERN: [net/atheroswifi/0] ieee80211_init
KERN: [net/atheroswifi/0] start running, 0 vaps running
KERN: ieee80211_notify_ifnet_change not implemented, yet.
KERN: [net/atheroswifi/0] ieee80211_start_locked: up parent 
KERN: [net/atheroswifi/0] start running, 1 vaps running
KERN: [net/atheroswifi/0] ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0)
KERN: /dev/net/atheroswifi/0: link down, media 0x20080 quality 1000 speed 0
KERN: [net/atheroswifi/0] start running, 1 vaps running
KERN: [net/atheroswifi/0] ieee80211_new_state_locked: pending INIT -> SCAN transition lost
KERN: [net/atheroswifi/0] ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0)
KERN: [net/atheroswifi/0] ieee80211_newstate_cb: INIT -> SCAN arg 0
KERN: [net/atheroswifi/0] sta_newstate: INIT -> SCAN (0)
KERN: [net/rtl81xx/0] compat_open(0x2)
KERN: slab memory manager: created area 0xffffffff96801000 (12333)
KERN: /dev/net/rtl81xx/0: link down, media 0x22 quality 1000 speed 0
AUTH 'sshd'[770]: error: setsockopt IPV6_V6ONLY: Operation not supported
AUTH 'sshd'[770]: Server listening on :: port 22.
AUTH 'sshd'[770]: Server listening on 0.0.0.0 port 22.
AUTH 'sshd'[770]: error: Couldn't create pid file "/packages/openssh-9.8p1-1/.self/var/run/sshd.pid": No such file or directory
KERN: radeon_hd: init_hardware
KERN: Radeon - init_hardware: Version: 5.1.6.0
KERN: Radeon - Radeon_CardDetect: no supported devices found
KERN: nvidia: CALLED init_hardware
KERN: nvidia: init_hardware: no supported device found
KERN: intel_extreme: CALLED status_t init_hardware()
KERN: intel_extreme: get_next_intel_extreme: Intel gfx deviceID: 0x0116
KERN: intel_extreme: CALLED status_t init_driver()
KERN: [36mAGP:[0m bus manager init
KERN: [36mAGP:[0m found 0 AGP devices
KERN: intel_extreme: detect_intel_pch: Intel PCH deviceID: 0x1c49
KERN: intel_extreme: detect_intel_pch: Found CougarPoint PCH
KERN: intel_extreme: get_next_intel_extreme: Intel gfx deviceID: 0x0116
KERN: intel_extreme: (0) SandyBridge Mobile GT2, revision = 0x9
KERN: intel_extreme: CALLED const char** publish_devices()
KERN: intel_extreme: CALLED device_hooks* find_device(const char*)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/intel_extreme
KERN: devfs: "intel_810" api_version missing
KERN: i810: init_hardware() - no supported devices
KERN: ati: init_hardware() - no supported devices
KERN: vesa: init_hardware()
KERN: vesa: init_driver()
KERN: vesa: publish_devices()
KERN: vesa: find_device()
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/graphics/vesa
KERN: framebuffer: init_hardware()
KERN: intel_extreme: CALLED status_t device_open(const char*, uint32, void**)
KERN: intel_extreme: intel_extreme: CALLED status_t intel_extreme_init(intel_info&)
KERN: intel_gart: bus manager init
KERN: intel_gart: found intel bridge
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: intel_gart: GTT base dd600000, size 2097152, entries 512, stolen 67104768
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: intel_gart: detected 64 MB of stolen memory, aperture size 256 MB, GTT size 2048 KB
KERN: intel_gart: GTT base = 0xdd600000
KERN: intel_gart: MMIO base = 0xdd400000
KERN: intel_gart: GMR base = 0xb0000000
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: intel_extreme: Init Intel generation 6 GPU with PCH split.
KERN: intel_extreme: REGS_NORTH_SHARED: 0x40000
KERN: intel_extreme: REGS_NORTH_PIPE_AND_PORT: 0x60000
KERN: intel_extreme: REGS_NORTH_PLANE_CONTROL: 0x70000
KERN: intel_extreme: REGS_SOUTH_SHARED: 0xc0000
KERN: intel_extreme: REGS_SOUTH_TRANSCODER_PORT: 0xe0000
KERN: [36mAGP:[0m create memory 0xffffffff95a24200, base ffffffffa0000000, size 10000, flags 0
KERN: [36mAGP:[0m allocation is made of reserved memory
KERN: [36mAGP:[0m reserved memory already bound
KERN: intel_extreme:CALLED status_t intel_en_gating(intel_info&)
KERN: intel_extreme:SandyBridge clock gating
KERN: intel_extreme:CALLED status_t intel_en_downclock(intel_info&)
KERN: intel_extreme: intel_en_downclock: Enabling Intel GPU auto downclocking depth 1
KERN: intel_extreme: Graphic OpRegion physical addr: 0xaaf77018; size: 0x2000
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: intel_extreme: mapping OpRegion: 0xaaf77018 -> 0xffffffff81b79018
KERN: intel_extreme: VBT signature "$VBT SANDYBRIDGE-M  ", BDB version 161
KERN: intel_extreme: found child device type: 0x1022
KERN: intel_extreme: found child device type: 0x60d2
KERN: intel_extreme: found child device type: 0x68c6
KERN: intel_extreme: panel type: 2
KERN: intel_extreme: LFP info terminator 300e
KERN: intel_extreme: found LFP of size 1366 x 768 in BIOS VBT tables
KERN: intel_extreme: found bdb lvds backlight info
KERN: intel_extreme: display 2 does not have PWM
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: [36mAGP:[0m create memory 0xffffffff95b56e00, base ffffffffa3fff000, size 1000, flags 2
KERN: [36mAGP:[0m allocate 4096 bytes out of 4096
KERN: [36mAGP:[0m bind 4096 bytes at ffffffffa3fff000
KERN: intel_extreme: Overlay registers mapped at 0x3fff000 = 0xffffffffa3fff000 - ffffffffa0000000 (22d61000)
KERN: intel_extreme: Allocating hardware status pageKERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 26
KERN: msi_allocate_vectors: allocated 1 vectors starting from 26
KERN: msi enabled: 0x0001
KERN: intel_extreme: using message signaled interrupts
KERN: intel_extreme: intel_extreme_init: rawclk rate: 125000 kHz
KERN: intel_extreme: intel_extreme_init: hw_cdclk: 400000 kHz
KERN: intel_extreme: intel_extreme_init: completed successfully!
KERN: intel_extreme: accelerant: intel_extreme.accelerant
KERN: intel_extreme: CALLED status_t intel_init_accelerant(int)
KERN: intel_extreme: Pipe A.
KERN: intel_extreme: Pipe: Pipe is routed through FDI
KERN: intel_extreme: PanelFitter: requested fitter #1
KERN: intel_extreme: PanelFitter: this fitter is connected to pipe #1
KERN: intel_extreme: Pipe Base: 0x0 Plane Base: 0x0
KERN: intel_extreme: Pipe B.
KERN: intel_extreme: Pipe: Pipe is routed through FDI
KERN: intel_extreme: PanelFitter: requested fitter #2
KERN: intel_extreme: PanelFitter: this fitter is not setup by the BIOS: Enabling.
KERN: intel_extreme: Pipe Base: 0x1000 Plane Base: 0x1000
KERN: intel_extreme: adpa: 00c40000
KERN: intel_extreme: dova: 00000018, dovb: 00000018, dovc: 00000018
KERN: intel_extreme: lvds: 80300302
KERN: intel_extreme: dp_a: 00000018
KERN: intel_extreme: dp_b: 00000000
KERN: intel_extreme: dp_c: 00000004
KERN: intel_extreme: dp_d: 00000000
KERN: intel_extreme: tra_dp: 60000418
KERN: intel_extreme: trb_dp: 60000018
KERN: intel_extreme: trc_dp: 60000018
KERN: intel_extreme: Probing DisplayPort 1
KERN: intel_extreme: IsConnected: DisplayPort A PortRegister: 0x2004000
KERN: intel_extreme: IsConnected: DisplayPort A: port not found in VBT
KERN: intel_extreme: Probing DisplayPort 2
KERN: intel_extreme: IsConnected: DisplayPort B PortRegister: 0x5004100
KERN: intel_extreme: IsConnected: DisplayPort B: port not found in VBT
KERN: intel_extreme: Probing DisplayPort 3
KERN: intel_extreme: IsConnected: DisplayPort C PortRegister: 0x5004200
KERN: intel_extreme: IsConnected: DisplayPort C: port found in VBT
KERN: intel_extreme: IsConnected: DisplayPort C link not detected
KERN: intel_extreme: Probing DisplayPort 4
KERN: intel_extreme: IsConnected: DisplayPort D PortRegister: 0x5004300
KERN: intel_extreme: IsConnected: DisplayPort D: port found in VBT
KERN: intel_extreme: IsConnected: DisplayPort D link not detected
KERN: intel_extreme: Probing HDMI 2
KERN: intel_extreme: IsConnected: HDMI B PortRegister: 0x5001140
KERN: intel_extreme: IsConnected: HDMI B: port not found in VBT
KERN: intel_extreme: Probing HDMI 3
KERN: intel_extreme: IsConnected: HDMI C PortRegister: 0x5001150
KERN: intel_extreme: IsConnected: HDMI C: port found in VBT
KERN: intel_extreme: Probing HDMI 4
KERN: intel_extreme: IsConnected: HDMI D PortRegister: 0x5001160
KERN: intel_extreme: IsConnected: HDMI D: port found in VBT
KERN: intel_extreme: Probing LVDS
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED virtual status_t Port::GetEDID(edid1_info*, bool)
KERN: intel_extreme: LVDS C: trying to read EDID
KERN: intel_extreme: LVDS C: using ddc @ 0x4005018
KERN: intel_extreme: LVDS C: found EDID information!
KERN: EDID info:
KERN:   EDID version: 1.3
KERN:   Vendor: LGD Product ID: 0x2dc
KERN:   Serial #: 0
KERN:   Produced in week/year: 0/2010
KERN:   Type: Digital
KERN:   Size: 34 cm x 19 cm
KERN:   Gamma=2.20
KERN:   Red (X,Y)=(0.6230,0.3691)
KERN:   Green (X,Y)=(0.3457,0.6104)
KERN:   Blue (X,Y)=(0.1484,0.0977)
KERN:   White (X,Y)=(0.3135,0.3291)
KERN: Supported Future Video Modes:
KERN: Supported VESA Video Modes:
KERN: Additional Video Mode (1366x768@59Hz):
KERN: clock=70.000 MHz
KERN: h: (1366, 1402, 1450, 1492)
KERN: v: (768, 771, 776, 782)
KERN: size: 34.4 cm x 19.4 cm
KERN: border: 0.0 cm x 0.0 cm
KERN: Ascii Data: LG Display
KERN: Ascii Data: LP156WH4-TLA1
KERN: intel_extreme: Probing Analog
KERN: intel_extreme: IsConnected: Analog A PortRegister: 0x5001100
KERN: intel_extreme: CALLED virtual status_t Port::GetEDID(edid1_info*, bool)
KERN: intel_extreme: Analog A: trying to read EDID
KERN: intel_extreme: Analog A: using ddc @ 0x4005010
KERN: DDC: ddc2_read: DDC information read failure
KERN: Last message repeated 3 times.
KERN: intel_extreme: Analog A: no EDID information found.
KERN: intel_extreme: Activating clocks
KERN: intel_extreme: CALLED void refclk_activate_ilk(bool)
KERN: intel_extreme: refclk_activate_ilk: Generation 6 graphics
KERN: intel_extreme: refclk_activate_ilk: PCH_DREF_CONTROL before: 0x400
KERN: intel_extreme: refclk_activate_ilk: No changes to reference clock.
KERN: intel_extreme: Probing complete.
KERN: intel_extreme: dump_ports: Connected ports: (port_count: 1)
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: port 0: LVDS C connected
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED virtual pipe_index LVDSPort::PipePreference()
KERN: package_daemon: [10276416:   708] The latest volume state is also the currently active one
KERN: package_daemon: [10277036:   708] KERN: Volume::InitialVerify((nil), (nil))
KERN: intel_extreme: CALLED virtual status_t Port::SetPipe(Pipe*)
KERN: intel_extreme: SetPipe: Assigning LVDS C (0x5001180) to pipe A
KERN: intel_extreme: CALLED bool Pipe::IsEnabled()
KERN: intel_extreme: CALLED void Pipe::Enable(bool)
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED status_t create_mode_list()
KERN: intel_extreme: CALLED virtual status_t Port::GetEDID(edid1_info*, bool)
KERN: package_daemon: [10338445:   708] Volume::InitialVerify(): volume at "/boot/system" is consistent
KERN: package_daemon: [10342084:   708] KERN: Failed to open packages activation file /boot/home/config/packages/administrative/activated-packages: No such file or directory
KERN: package_daemon: [10342880:   708] Failed to get activated packages info from activated packages file. Assuming all package files in package directory are activated.
KERN: package_daemon: [10343654:   708] KERN: The latest volume state is also the currently active one
KERN: package_daemon: [10344159:   708] KERN: Volume::InitialVerify(0x10d27c0144e0, (nil))
KERN: package_daemon: [10355115:   708] Volume::InitialVerify(): volume at "/boot/home/config" is consistent
KERN: intel_extreme: intel_set_display_mode(1366x768, virtual: 1366x768)
KERN: intel_extreme: CALLED status_t intel_propose_display_mode(display_mode*, const display_mode*, const display_mode*)
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED void Pipe::Enable(bool)
KERN: [36mAGP:[0m create memory 0xffffffff80fbbb80, base ffffffffa0010000, size 408000, flags 0
KERN: [36mAGP:[0m allocation is made of reserved memory
KERN: [36mAGP:[0m reserved memory already bound
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED virtual status_t LVDSPort::SetDisplayMode(display_mode*, uint32)
KERN: intel_extreme: SetDisplayMode: LVDS C-3 1366x768
KERN: intel_extreme: SetDisplayMode: LVDS C didn't power off within 1000ms!
KERN: intel_extreme: SetDisplayMode: Setting LVDS to native resolution at 59Hz
KERN: intel_extreme: Enable: PCH_PANEL_FITTER_CONTROL, 0x80800000
KERN: intel_extreme: Enable: PCH_PANEL_FITTER_WINDOW_POS, 0x0
KERN: intel_extreme: CALLED status_t FDILink::PreTrain(display_timing*, uint32*, uint32*, uint32*)
KERN: intel_extreme: PreTrain: FDI Link A:
KERN: intel_extreme: PreTrain: FDI Link Colordepth: 18
KERN: intel_extreme: PreTrain: FDI Link Lanes: 4
KERN: intel_extreme: PreTrain: FDI TX ctrl before: 0xb01c4000
KERN: intel_extreme: PreTrain: FDI RX ctrl before: 0x801a2350
KERN: intel_extreme: SetFDILink: fPipeOffset: 0x0
KERN: intel_extreme: SetFDILink: FDI/PIPE link reference clock is 270Mhz
KERN: intel_extreme: SetFDILink: FDI/PIPE M1 data before: 0x7e12aaaa
KERN: intel_extreme: SetFDILink: FDI/PIPE N1 data before: 0x800000
KERN: intel_extreme: SetFDILink: FDI/PIPE M1 link before: 0x212f6
KERN: intel_extreme: SetFDILink: FDI/PIPE N1 link before: 0x80000
KERN: intel_extreme: SetFDILink: FDI/PIPE link colordepth: 18
KERN: intel_extreme: SetFDILink: FDI/PIPE link with 4 lane(s) in use
KERN: intel_extreme: SetFDILink: FDI/PIPE M1 data after: 0x7e12aaaa
KERN: intel_extreme: SetFDILink: FDI/PIPE N1 data after: 0x800000
KERN: intel_extreme: SetFDILink: FDI/PIPE M1 link after: 0x212f6
KERN: intel_extreme: SetFDILink: FDI/PIPE N1 link after: 0x80000
KERN: intel_extreme: CALLED status_t FDILink::Train(display_timing*, uint32)
KERN: intel_extreme: Train: FDI TX ctrl after: 0xb01c4000
KERN: intel_extreme: Train: FDI RX ctrl after: 0x801a2350
KERN: intel_extreme: compute_dpll_g4x: required MHz: 70, reference clock: 120
KERN: intel_extreme: PLL limits, min: p 28 (p1 2, p2 14), n 3, m 79 (m1 14, m2 7)
KERN: intel_extreme: PLL limits, max: p 112 (p1 8, p2 14), n 5, m 118 (m1 24, m2 11)
KERN: intel_extreme: compute_dpll_g4x: best MHz: 70 (error: 0)
KERN: intel_extreme: compute_pll_divisors: found: p = 42 (p1 = 3, p2 = 14), n = 4, m = 98 (m1 = 18, m2 = 8)
KERN: intel_extreme: LVDS: single channel
KERN: intel_extreme: SetDisplayMode: LVDS Write: 0x80300302
KERN: intel_extreme: CALLED void Pipe::ConfigureClocks(const pll_divisors&, uint32, uint32)
KERN: intel_extreme: Old PLL selection: 0x8
KERN: intel_extreme: Route PLL A to transcoder A
KERN: intel_extreme: New PLL selection: 0x8
KERN: intel_extreme: CALLED void Pipe::ConfigureTimings(display_mode*, bool, port_index)
KERN: intel_extreme: ConfigureTimings(1): fPipeOffset: 0x0
KERN: intel_extreme: CALLED void Pipe::ConfigureScalePos(display_mode*)
KERN: intel_extreme: ConfigureScalePos: fPipeOffset: 0x0
KERN: intel_extreme: CALLED void Pipe::_ConfigureTranscoder(display_mode*)
KERN: intel_extreme: _ConfigureTranscoder: fPipeOffset: 0x0
KERN: intel_extreme: intel_set_display_mode: Port configuration completed successfully!
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED void Pipe::Enable(bool)
KERN: intel_extreme: CALLED status_t intel_get_frame_buffer_config(frame_buffer_config*)
KERN: intel_extreme: IsConnected: LVDS C PortRegister: 0x5001180
KERN: intel_extreme: CALLED void Pipe::Enable(bool)
KERN: intel_extreme: CALLED status_t intel_set_brightness(float)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/wacom
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/usb_hid
KERN: ps2_hid: init_hardware
KERN: ps2_hid: init_driver
KERN: ps2: active multiplexing v1.1 enabled
KERN: ps2_hid: publish_devices
KERN: ps2_hid: uninit_driver
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/ps2_hid
KERN: ps2_dev: reset failed: I/O error
KERN: ps2: devfs_publish_device input/mouse/ps2/0, status = 0xffffffff
KERN: ps2_dev: reset failed: I/O error
KERN: ps2: devfs_publish_device input/mouse/ps2/1, status = 0xffffffff
KERN: ps2_dev: reset failed: I/O error
KERN: ps2: devfs_publish_device input/mouse/ps2/2, status = 0xffffffff
KERN: usb_hid: keyboard device unhandled control 0x00002710
USER: Notify of added/removed/started/stopped device
Last message repeated 2 times
KERN: usb_hid: keyboard device unhandled control 0x00002710
KERN: Elantech version 450F01, under developement! Using fallback.
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/bus/usb_raw
KERN: sis7018:init_hardware:ver:2.0.2
KERN: usb_audio:00.21.348:init_driver::ver.0.0.5
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/usb_audio
KERN: pci_reserve_device(0, 27, 0, hda)
KERN: HDA: Detected controller @ PCI:0:27:0, IRQ:22, type 8086/1c20 (1043/1ac3)
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/audio/hmulti/hda
KERN: emuxki: init_hardware()
KERN: echo3g: init_hardware()
KERN: echo3g: no card found
KERN: auvia: init_hardware()
KERN: auich: init_hardware()
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0xaaf40000, size:    0x40000, type: 0
KERN:   mtrr:  1: base: 0xaaf80000, size:    0x40000, type: 0
KERN:   mtrr:  2: base: 0xaafe0000, size:     0x8000, type: 0
KERN:   mtrr:  3: base: 0xaaffd000, size:     0x1000, type: 0
KERN:   mtrr:  4: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  5: base: 0xb0000000, size: 0x10000000, type: 1
KERN: allocate_io_interrupt_vectors: allocated 1 vectors starting from 27
KERN: msi_allocate_vectors: allocated 1 vectors starting from 27
KERN: msi enabled: 0x0081
KERN: hda: using MSI vector 27
KERN: hda: DMA snooping: yes
KERN: hda: HDA v1.0, O:4/I:4/B:0, #SDO:1, 64bit:yes
KERN: hda: Audio Group: Output delay: 15 samples, Input delay: 15 samples, Beep Generator: yes
KERN: hda:   #GPIO: 2, #GPO: 0, #GPI: 0, unsol: yes, wake: no
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda:   widget start 2, count 34
KERN: hda: 2: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87
KERN: hda: 3: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87
KERN: hda: 4: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 5: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 6: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 88khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Digital] [Format override] [Stereo] 
KERN: hda: 7: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 8: Audio input
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11
KERN: hda: 	Inputs: <35> 
KERN: hda: 9: Audio input
KERN: hda: 	Supported formats: 16bits 20bits 24bits 
KERN: hda: 	Supported rates: 44khz 48khz 96khz 192khz 
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11
KERN: hda: 	Inputs: <34> 
KERN: hda: 10: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 11: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
KERN: hda: 	Inputs: 24 25 26 27 29 
KERN: hda: 12: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 2 11 
KERN: hda: 13: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 3 11 
KERN: hda: 14: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 15: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 2 11 
KERN: hda: 16: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 17: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 18: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 19: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 20: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Fixed, Speaker, ATAPI internal, N/A, Association:1
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 13 
KERN: hda: 21: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 22: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 23: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [Out amplifier] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <15> 
KERN: hda: 24: Pin complex
KERN: hda: 	[Input] [Output]
KERN: hda: 	Jack, Right Mic in, 1/8", Black, Association:2
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <13> 
KERN: hda: 25: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	Fixed, Mic in, ATAPI internal, N/A, Association:2
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Unsol. responses] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 26: Pin complex
KERN: hda: 	[Input] [Output]
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 13 
KERN: hda: 27: Pin complex
KERN: hda: 	[Input] [Output]
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 13 
KERN: hda: 28: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 29: Pin complex
KERN: hda: 	[Input] 
KERN: hda: 	None, Line out, Other analog, Pink, Association:2
KERN: hda: 	Supported power states: D0 
KERN: hda: 30: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, Speaker, 1/8", Black, Association:15
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Digital] [Conn. list] [Unsol. responses] [Stereo] 
KERN: hda: 	Inputs: <6> 
KERN: hda: 31: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 32: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 	[Proc widget] 
KERN: hda: 33: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Jack, Right HP out, 1/8", Black, Association:1
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 13 
KERN: hda: 34: Audio selector
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	Inputs: 24 25 26 27 29 11 18 
KERN: hda: 35: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 24 25 26 27 29 11 
KERN: hda: build output tree: use mixer
KERN: hda:   look at pin widget 20 (2 inputs)
KERN: hda:     try widget 12: 0xffffffff821d4eb8
KERN: hda:     widget 12 is candidate
KERN: hda:         output: added output widget 2
KERN: hda:       output: added mixer/selector widget 12
KERN: hda:         output: not added mixer/selector widget 11
KERN: hda:     add pin widget 20
KERN: hda:   look at pin widget 23 (1 inputs)
KERN: hda:     try widget 15: 0xffffffff821d50bc
KERN: hda:     widget 15 is candidate
KERN: hda:         output: added output widget 2
KERN: hda:       output: added mixer/selector widget 15
KERN: hda:         output: not added mixer/selector widget 11
KERN: hda:     add pin widget 23
KERN: hda:   look at pin widget 26 (2 inputs)
KERN: hda:     try widget 12: 0xffffffff821d4eb8
KERN: hda:     widget 12 is candidate
KERN: hda:     try widget 13: 0xffffffff821d4f64
KERN: hda:     widget 13 is candidate
KERN: hda:         output: added output widget 3
KERN: hda:       output: added mixer/selector widget 13
KERN: hda:         output: not added mixer/selector widget 11
KERN: hda:     add pin widget 26
KERN: hda:   look at pin widget 27 (2 inputs)
KERN: hda:     try widget 12: 0xffffffff821d4eb8
KERN: hda:     widget 12 is candidate
KERN: hda:     try widget 13: 0xffffffff821d4f64
KERN: hda:     widget 13 is candidate
KERN: hda:   look at pin widget 30 (1 inputs)
KERN: hda:     try widget 6: 0xffffffff821d4ab0
KERN: hda:   look at pin widget 33 (2 inputs)
KERN: hda:     try widget 12: 0xffffffff821d4eb8
KERN: hda:     widget 12 is candidate
KERN: hda:     add pin widget 33
KERN: hda: build input tree
KERN: hda:   look at input widget 8 (1 inputs)
KERN: hda:     try widget 35: 0xffffffff821d5e2c
KERN: hda:     widget 35 is candidate
KERN: hda:         input: added input widget 24
KERN: hda:       input: added mixer/selector widget 35
KERN: hda:         input: added input widget 25
KERN: hda:       input: added mixer/selector widget 35
KERN: hda:         input: not added mixer/selector widget 11
KERN: hda:     add pin widget 8
KERN: hda:   look at input widget 9 (1 inputs)
KERN: hda:     try widget 34: 0xffffffff821d5d80
KERN: hda:     widget 34 is candidate
KERN: hda:         input: not added mixer/selector widget 11
KERN: hda:       input: not added mixer/selector widget 34
KERN: hda: build tree!
KERN: hda: 	Audiogroup:
KERN: hda: 2: Audio output
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87
KERN: hda: 3: Audio output
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Format override] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: step size: 0.75 dB, # steps: 87, offset to 0 dB: 87
KERN: hda: 4: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 5: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 6: Audio output
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Digital] [Format override] [Stereo] 
KERN: hda: 7: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 8: Audio input
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11
KERN: hda: 	Inputs: <35> 
KERN: hda: 9: Audio input
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Format override] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 11
KERN: hda: 	Inputs: <34> 
KERN: hda: 10: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 11: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 1.5 dB, # steps: 31, offset to 0 dB: 23
KERN: hda: 	Inputs: <24> 25 26 27 29 
KERN: hda: 12: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <2> 11 
KERN: hda: 13: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <3> 11 
KERN: hda: 14: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 15: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <2> 11 
KERN: hda: 16: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 17: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 18: Pin complex
KERN: hda: 	[Input]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 19: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 20: Pin complex
KERN: hda: 	[Pres Detect][Output][EAPD]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <12> 13 
KERN: hda: 21: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 22: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 23: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [Out amplifier] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <15> 
KERN: hda: 24: Pin complex
KERN: hda: 	[Pres Detect][Output][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <13> 
KERN: hda: 25: Pin complex
KERN: hda: 	[Pres Detect][Input][VRef HIZ][VRef 50][VRef Gr][VRef 80]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Unsol. responses] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 26: Pin complex
KERN: hda: 	[Pres Detect][HP Drive][Output][Input]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: 12 <13> 
KERN: hda: 27: Pin complex
KERN: hda: 	[Pres Detect][Output][Input]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: step size: 12 dB, # steps: 3, offset to 0 dB: 0
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <12> 13 
KERN: hda: 28: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 29: Pin complex
KERN: hda: 	[Input]
KERN: hda: 	Supported power states: D0 
KERN: hda: 30: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Digital] [Conn. list] [Unsol. responses] [Stereo] 
KERN: hda: 	Inputs: <6> 
KERN: hda: 31: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 32: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: 	[Proc widget] 
KERN: hda: 33: Pin complex
KERN: hda: 	[Pres Detect][HP Drive][Output]
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <12> 13 
KERN: hda: 34: Audio selector
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	Inputs: <24> 25 26 27 29 11 18 
KERN: hda: 35: Audio mixer
KERN: hda: 	Supported power states: D0 
KERN: hda: 	[Conn. list] [Amplifier override] [In amplifier] [Stereo] 
KERN: hda: 	In Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <24> 25 26 27 29 11 
KERN: hda: Enabled unsolicited responses on widget 24
KERN: hda: Enabled unsolicited responses on widget 33
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 2 (offset 87)
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 3 (offset 87)
KERN: hda: UNMUTE/SET INPUT GAIN widget 12 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 13 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 15 (offset 0)
KERN: hda: ENABLE pin widget 20
KERN: hda: ENABLE EAPD pin widget 20
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 20 (offset 0)
KERN: hda: ENABLE pin widget 23
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 23 (offset 0)
KERN: hda: ENABLE pin widget 26
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 26 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 26 (offset 0)
KERN: hda: ENABLE pin widget 33
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 33 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 8 (offset 11)
KERN: hda: input vref 50 enabled
KERN: hda: input vref 80 enabled
KERN: hda: ENABLE pin widget 24
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 24 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 24 (offset 0)
KERN: hda: input vref 50 enabled
KERN: hda: input vref 80 enabled
KERN: hda: ENABLE pin widget 25
KERN: hda: UNMUTE/SET INPUT GAIN widget 25 (offset 0)
KERN: hda: UNMUTE/SET INPUT GAIN widget 35 (offset 0)
KERN: hda: streams playback 0xffffffff962fbbc8, record 0xffffffff962fba88
KERN: hda: sensed pin widget 33, 0
KERN: hda: Codec 0 Vendor: 10ec Product: 0269 Subsystem: 10431ac3, Revision: 1.0.1.0 Quirks: 0700
KERN: hda: Audio Group: Output delay: 4 samples, Input delay: 0 samples, Beep Generator: no
KERN: hda:   #GPIO: 0, #GPO: 0, #GPI: 0, unsol: no, wake: no
KERN: hda: 	Supported formats: 
KERN: hda: 	Supported rates: 
KERN: hda:   widget start 2, count 7
KERN: hda: 2: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 32bits bitstream 
KERN: hda: 	Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz 
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 3: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 32bits bitstream 
KERN: hda: 	Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz 
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 4: Audio output
KERN: hda: 	Supported formats: 16bits 20bits 24bits 32bits bitstream 
KERN: hda: 	Supported rates: 32khz 44khz 48khz 88khz 96khz 176khz 192khz 
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 5: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, HDMI Digital other out, Other digital, N/A, Association:1
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <2> 
KERN: hda: 6: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	Jack, HDMI Digital other out, Other digital, N/A, Association:2
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <3> 
KERN: hda: 7: Pin complex
KERN: hda: 	[Output]
KERN: hda: 	None, HDMI Digital other out, Other digital, N/A, Association:3
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <4> 
KERN: hda: 8: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: build output tree: use mixer
KERN: hda:   look at pin widget 5 (1 inputs)
KERN: hda:     try widget 2: 0xffffffff95dd0040
KERN: hda:   look at pin widget 6 (1 inputs)
KERN: hda:     try widget 3: 0xffffffff95dd00ec
KERN: hda:   look at pin widget 7 (1 inputs)
KERN: hda:     try widget 4: 0xffffffff95dd0198
KERN: hda: try without mixer!
KERN: hda: build output tree: don't use mixer
KERN: hda:   look at pin widget 5 (1 inputs)
KERN: hda:     try widget 2: 0xffffffff95dd0040
KERN: hda:     widget 2 is candidate
KERN: hda:       output: added output widget 2
KERN: hda:     add pin widget 5
KERN: hda:   look at pin widget 6 (1 inputs)
KERN: hda:     try widget 3: 0xffffffff95dd00ec
KERN: hda:     widget 3 is candidate
KERN: hda:       output: added output widget 3
KERN: hda:     add pin widget 6
KERN: hda:   look at pin widget 7 (1 inputs)
KERN: hda:     try widget 4: 0xffffffff95dd0198
KERN: hda:     widget 4 is candidate
KERN: hda:       output: added output widget 4
KERN: hda:     add pin widget 7
KERN: hda: build input tree
KERN: hda: build input tree failed
KERN: hda: build tree!
KERN: hda: 	Audiogroup:
KERN: hda: 2: Audio output
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 3: Audio output
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 4: Audio output
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[Power] [Digital] [Format override] [Stereo] 
KERN: hda: 5: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <2> 
KERN: hda: 6: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <3> 
KERN: hda: 7: Pin complex
KERN: hda: 	[Pres Detect][Output]
KERN: hda: 	Supported power states: D0 D3 
KERN: hda: 	[CP caps] [Power] [Digital] [Conn. list] [Unsol. responses] [Amplifier override] [Out amplifier] [Stereo] 
KERN: hda: 	Out Amp: supports mute, step size: 0.25 dB, # steps: 0, offset to 0 dB: 0
KERN: hda: 	Inputs: <4> 
KERN: hda: 8: Vendor defined
KERN: hda: 	Supported power states: 
KERN: hda: Enabled unsolicited responses on widget 5
KERN: hda: Enabled unsolicited responses on widget 6
KERN: hda: Enabled unsolicited responses on widget 7
KERN: hda: ENABLE pin widget 5
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 5 (offset 0)
KERN: hda: ENABLE pin widget 6
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 6 (offset 0)
KERN: hda: ENABLE pin widget 7
KERN: hda: UNMUTE/SET OUTPUT GAIN widget 7 (offset 0)
KERN: hda: hda_audio_group_get_widgets failed for playback stream
KERN: hda: hda_audio_group_get_widgets failed for record stream
KERN: hda: streams playback 0x0000000000000000, record 0x0000000000000000
KERN: hda: Failed to setup new audio function group (No such device)!
KERN: looking for settings file
KERN: hda: sample size 4, num channels 2, buffer length 10240
KERN: hda: hda_stream_setup_buffers: setup stream 1: SR=192000, SF=24 F=0x1831 (0x100)
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 163840 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 1 fifo size: 1536 num_io_widgets: 2
KERN: hda: widgets: KERN: 2 KERN: 3 
KERN: hda: sample size 4, num channels 2, buffer length 10240
KERN: hda: hda_stream_setup_buffers: setup stream 2: SR=192000, SF=24 F=0x1831 (0x100)
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 163840 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 2 fifo size: 1536 num_io_widgets: 1
KERN: hda: widgets: KERN: 8 
KERN: ps2: probe_mouse Standard PS/2 mouse found
KERN: ps2: devfs_publish_device input/mouse/ps2/standard_3, status = 0x00000000
KERN: ps2: devfs_publish_device input/keyboard/at/0, status = 0x00000000
KERN: hda: sample size 4, num channels 2, buffer length 10240
KERN: hda: hda_stream_setup_buffers: setup stream 1: SR=192000, SF=24 F=0x1831 (0x100)
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 163840 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Playback): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 1 fifo size: 1536 num_io_widgets: 2
KERN: hda: widgets: KERN: 2 KERN: 3 
KERN: hda: sample size 4, num channels 2, buffer length 6144
KERN: hda: hda_stream_setup_buffers: setup stream 2: SR=96000, SF=24 F=0x831 (0x100)
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 98304 bytes for 2 buffers
KERN: hda: hda_stream_setup_buffers(Recording): Allocated 4096 bytes for 2 BDLEs
KERN: hda: stream: 2 fifo size: 768 num_io_widgets: 1
KERN: hda: widgets: KERN: 8 
KERN: hda_stream_start() offset 80
KERN: hda_stream_start() offset 0
USER: Notify of added/removed/started/stopped device
KERN: ps2: keyboard found
USER: Notify of added/removed/started/stopped device
KERN: usb hub 38: port 2: new device connected
KERN: usb_disk: device reports a lun count of 1
KERN: usb_disk: vendor_identification    "Generic "
KERN: usb_disk: product_identification   "STORAGE DEVICE  "
KERN: usb_disk: product_revision_level   "9407"
KERN: publish device: node 0xffffffff95a31160, path disk/usb/1/0/raw, module drivers/disk/usb_disk/device_v1
KERN: usb_audio:00.31.755:init_driver::ver.0.0.5
KERN: DMAResource@0xffffffff95a222a8: low/high 0/ffffffffffffffff, max segment count 16, align 1, boundary 0, max transfer 65536, max segment size 18446744073709551615
KERN: usb_disk: got device name "Generic STORAGE DEVICE 9407": No error
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(57, 7: 0, 127865454592, 512)
KERN: identify(57, 0xffffffff8086d4b0)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [31799116:  1029] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
KERN: dosfs error: media descriptor mismatch in fat # 1 (15 != 240)
KERN: intel: pm_scan_partition(57, 7: 0, 127865454592, 512)
KERN: intel: ep_std_ops(0x1)
KERN: intel: ep_identify_partition(57, 1048576, 127864406016, 512)
KERN: intel: ep_std_ops(0x2)
KERN: intel: pm_identify_partition(57, 8: 1048576, 127864406016, 512)
KERN: identify(57, 0xffffffff96298800)
KERN: [34mexfat:[0m invalid superblock!
KERN: btrfs: [31826373:  1029] invalid superblock!
KERN: usb_disk: unhandled ioctl 10102
KERN: [34mufs2:[0m Invalid superblock! Identify failed!!
KERN: ntfs: error: identify_partition: boot signature doesn't match
KERN: [34mext2:[0m invalid superblock!
Last edited 6 weeks ago by nephele (previous) (diff)

comment:7 by waddlesplash, 6 weeks ago

This isn't readable. Please attach the syslog as a text file instead.

comment:8 by madmax, 6 weeks ago

dosfs error: media descriptor mismatch in fat # 1 (15 != 240)

The first FAT mirror in the filesystem has a different (and invalid) media descriptor. But then ​previous code flipped the bits, which would pass the test.

Was the FAT partition created and only used in Haiku?

by andianton, 6 weeks ago

Attachment: fat_partition_test.tar.gz​ added

syslog on different build versions for testing purpose

comment:9 by andianton, 6 weeks ago

Sorry, it takes some time to accomodate with the interface. I attached syslog files with dongle ON/OFF on different builds.

The fat partition was not created with Haiku. I don't remember exactely if the partition whas the one provided by the manufacturer (SanDisk in my case), or was created in FreeBSD. But in hrev57609 everything works quite fine. I use that dongle a lot in the last year, I have a lot of data on it, almost all files were created with different Haiku apps.

comment:10 by madmax, 6 weeks ago

But then ​previous code flipped the bits, which would pass the test.

Forget that, the data is overwritten just after the bit flip.

syslog on different build versions for testing purpose

Those show the same media descriptor error for all revisions except 57921, including the ones where it is reported as working.

In 57921 there's a note there about the FAT copy not matching the active one, but that's informative.

For all except 57740 there's also a lot of errors like: 

KERN: usb error ehci 1: qtd (0x13cbe380) error: 0x00080e42
KERN: usb error ehci 1: qtd (0x13cbe580) error: 0x00080e42
KERN: usb error ehci 1: qtd (0x13cbe780) error: 0x001f8049
KERN: usb_disk: sending the command block wrapper failed: Device check-sum error

In both 57609 and 57921 there's also: 

KERN: usb_disk: receiving the command status wrapper failed: General system error

So I'm even more confused now.

comment:11 by pulkomandy, 5 weeks ago

In 57921 there's a note there about the FAT copy not matching the active one, but that's informative.

But the new log is an error:

dosfs error: media descriptor mismatch in fat # 1 (15 != 240)

This leads to check_fat returning an error (B_BAD_VALUE), and if that happens, the drive isn't mounted. We could relax the check, but then risk mishandling some partitions and corrupting them. Ideally you should fix your partition using fsck or Windows's checkdisk tool and this would fix this information? Unless we're mis-interpreting some data here.

How large is the partition? Would you be OK with sharing a dump of it for investigation? If not the whole partition, at least the first megabyte or so (that should contain the FAT headers and allow to see what is going on exactly).

in reply to:  11 comment:12 by madmax, 5 weeks ago

Replying to pulkomandy:

But the new log is an error:

dosfs error: media descriptor mismatch in fat # 1 (15 != 240)

And it was an error also before the FAT driver change and in any of the revisions named.

I mean, that's why it is not mounted, but it also would forbid mounting in other revisions.

in reply to:  11 comment:13 by andianton, 5 weeks ago

The fat partition has 128gb, but my net connection is slow, I dont think I can share with you the whole partition. If you can tell me how can I give you the first 1mb, sure, np!

Replying to pulkomandy:

In 57921 there's a note there about the FAT copy not matching the active one, but that's informative.

But the new log is an error:

dosfs error: media descriptor mismatch in fat # 1 (15 != 240)

This leads to check_fat returning an error (B_BAD_VALUE), and if that happens, the drive isn't mounted. We could relax the check, but then risk mishandling some partitions and corrupting them. Ideally you should fix your partition using fsck or Windows's checkdisk tool and this would fix this information? Unless we're mis-interpreting some data here.

How large is the partition? Would you be OK with sharing a dump of it for investigation? If not the whole partition, at least the first megabyte or so (that should contain the FAT headers and allow to see what is going on exactly).

Last edited 5 weeks ago by andianton (previous) (diff)

comment:14 by Jim906, 5 weeks ago

You could use dd in Terminal to create a copy of the first megabyte of the partition.

If you use dd, please be careful because you can easily lose data if you make a mistake.

Example:

~> dd if=/dev/disk/ata/1/slave/0 of=FatFirstMB count=2000

In this example, /dev/disk/ata/1/slave/0 is the filename of a (not currently mounted) partition, as displayed in DriveSetup (you will need to replace this with the actual name of the FAT partition on your USB dongle). FatFirstMB is the name of a new file to be created in the Terminal working directory (be sure not to use an existing filename, or it will be over-written). The count of 2000 tells dd to copy 2000 X 512 bytes from 'if' to 'of.'

Last edited 5 weeks ago by Jim906 (previous) (diff)

by andianton, 4 weeks ago

Attachment: FatFirstMB​ added

First MB of fat partition

comment:15 by Jim906, 4 weeks ago

I hadn't considered how large the FAT tables would be on a 128 GB partition. Since we are interested in the start of the second FAT, the first MB is not enough. Could you provide the first 20 MB (using dd with count=40000)?

It might also help if you could provide the output of fsck when run in inspect-only mode. With the USB FAT partition not mounted, you would enter these commands:

~> pkgman install dosfstools

~> fsck.fat -n -v [partition file name as displayed in DriveSetup]

comment:16 by Kierunkowy74, 4 weeks ago

I can trigger the bug even for FAT partition created directly in Haiku.

I am on hrev57937+36 (x86_64) right now, running from USB (anyboot) and tried to make an USB install ​https://www.haiku-os.org/guides/uefi_booting

This means my partition is 64MiB and I can upload its entire dump! (edit: or rather not - 5 MiB upload limit)

Last edited 4 weeks ago by Kierunkowy74 (previous) (diff)

comment:17 by waddlesplash, 4 weeks ago

It may be small enough if you zip it up; presumably most of it is empty space.

in reply to:  17 comment:18 by Kierunkowy74, 4 weeks ago

Replying to waddlesplash:

It may be small enough if you zip it up; presumably most of it is empty space.

Zipping it (even 7-zipping it with Beezer with best settings) compresses the image only to 50 MiB.

Anyway, I have created another "EFI system data" partition dump, but only 5 MiB and this will I attach.

edit: mounting this partition triggers the bug too

Last edited 4 weeks ago by Kierunkowy74 (previous) (diff)

by Kierunkowy74, 4 weeks ago

Attachment: 5MB​ added

Dump of 5MiB "Efi boot data" partition created by Haiku DriveSetup

by Kierunkowy74, 4 weeks ago

Attachment: Anothersyslog​ added

Syslog from a machine, includes two "EFI boot" partitions (64 and 5 MiB, dump of second one is attached too) being created, and attempt to mount them. The USB drive was activated once during this session.

in reply to:  15 comment:19 by andianton, 4 weeks ago

Maximum attachment size: 5.0 MB

Replying to Jim906:

I hadn't considered how large the FAT tables would be on a 128 GB partition. Since we are interested in the start of the second FAT, the first MB is not enough. Could you provide the first 20 MB (using dd with count=40000)?

It might also help if you could provide the output of fsck when run in inspect-only mode. With the USB FAT partition not mounted, you would enter these commands:

~> pkgman install dosfstools

~> fsck.fat -n -v [partition file name as displayed in DriveSetup]

comment:20 by andianton, 4 weeks ago

Here is the result of fsck.fat - apparently the command is stucked at this point (after about 30mins it doesnt finish its job).

fsck.fat -n -v /dev/disk/usb/0/0/0 fsck.fat 4.1 (2017-01-24) Checking we can access the last sector of the filesystem There are differences between boot sector and its backup. This is mostly harmless. Differences: (offset:original/backup)

71:41/4e, 72:4e/4f, 73:44/20, 74:49/4e, 75:53/41, 76:54/4d, 77:49/45 , 78:43/20, 79:4b/20 Not automatically fixing this.

Boot sector contents: System ID "mkfs.fat" Media byte 0xf8 (hard disk)

512 bytes per logical sector

32768 bytes per cluster

64 reserved sectors

First FAT starts at byte 32768 (sector 64)

2 FATs, 32 bit entries

15630336 bytes per FAT (= 30528 sectors)

Root directory start at cluster 2 (arbitrary size) Data area starts at byte 31293440 (sector 61120)

3901157 data clusters (127833112576 bytes)

63 sectors/track, 255 heads

2048 hidden sectors

249735168 sectors total

FATs differ but appear to be intact. Using first FAT.

comment:21 by andianton, 4 weeks ago

The fsck process finished after some time with this message:

Checking for unused clusters. Checking free cluster summary. Leaving filesystem unchanged. /dev/disk/usb/0/0/0: 6092 files, 1527170/3901157 clusters

After this, the usb dongle is recognized and I can mount it, but then I unmount the partition and when I plugged back the usb dongle, it does not recognize the partition anymore.

comment:22 by Jim906, 4 weeks ago

Kierunkowy74, I just submitted a patch (​https://review.haiku-os.org/c/haiku/+/8081) that should fix the problem that you demonstrated when creating new FAT partitions in Haiku. This problem arose because I made a change to how the media byte is set in the bootsector, but I didn't properly duplicate that change when setting the media byte in the FAT.

andianton, to capture the start of the second FAT table, it might work to use the dd command to generate a 1 MB file that is offset from the start of the partition, like this:

~> dd if=[partition name] of=FatOffsetMB count=2000 skip=30591

comment:23 by waddlesplash, 4 weeks ago

Merged that fix in hrev57992.

comment:24 by Kierunkowy74, 4 weeks ago

After update to hrev57996 I can mount FAT partitions, formatted either on Haiku or Linux. The bug is fixed for me.

comment:25 by andianton, 4 weeks ago

Yep, with hrev57996 my usb dongle can be accessed again. Just as a note, I saw that after plugg in the device, I need to wait for lets say 1 minute or even more, before being detected (DriveSetup also does not detected the device în that waiting period). Overall, things seems to work, but with the oldest builds the same device was detected instantly. Anyway, I guess this bug can be marked as fixed.

comment:26 by pulkomandy, 4 weeks ago

Resolution: → fixed
Status: new → closed

I need to wait for lets say 1 minute or even more, before being detected (DriveSetup also does not detected the device în that waiting period).

Please watch the syslog during that time to see what happens.

For example open a terminal and use tail -f /var/log/syslog. Then plug the USB drive and wait until it appears. Then copy the terminal content and attach it to a new ticket, since this seems to be a separate problem.

comment:27 by Jim906, 4 weeks ago

If the USB partition is automatically mounting during this 1 minute, the delay is probably due to check_fat() and fillinusemap() having to parse the entire FAT as part of the mount function.

I submitted a patch to address this (​https://review.haiku-os.org/c/haiku/+/8095) by using a abbreviated check_fat when the FAT size is large.

Even with this patch, mounting will still be slower than it was with the earlier FAT driver because fillinusemap reads the FAT to set up an in-memory bitmap of free clusters. The tradeoff is that once the partition is mounted, operations that allocate disk clusters should be faster.

Note: See TracTickets for help on using tickets.