Opened 3 months ago
Last modified 4 weeks ago
#19109 new bug
Beta 5 - no boot from USB Stick
| Reported by: | vercu | Owned by: | mmlr |
|---|---|---|---|
| Priority: | normal | Milestone: | Unscheduled |
| Component: | Drivers/USB | Version: | R1/beta5 |
| Keywords: | boot-failure | Cc: | |
| Blocked By: | Blocking: | ||
| Platform: | All |
Description
I have got a Notebook (TigerLake Chipset). It has NVMe Hard Disk not visible #18500. I used a 256gb USB Stick with beta 4 and nightlies. That worked without problems. Installed Beta 5 on this stick the notebook mostly does not boot. Today it booted only on a single startup. After that no booting. What works 10 out of 10 is another USB stick with the dded Beta 5 iso.
Picture of the failure is enclosed. Any ideas what went wrong?
Laptop configuration: HP Envy 14-eb0001nt, i7-1165G7, 16gb RAM, NVIDIA GeForce GTX 1650 Ti Max-Q/Intel Iris Xe, 1TB NVMe, WI-FI 6 AX201
Attachments (4)
Change History (18)
by , 3 months ago
| Attachment: | NVMe Hard Disk not visible.jpg added |
|---|
by , 3 months ago
| Attachment: | syslog-256gb_usb added |
|---|
by , 3 months ago
| Attachment: | syslog.old-256gb_usb added |
|---|
comment:1 by , 3 months ago
comment:2 by , 3 months ago
| Component: | - General → Drivers/USB |
|---|---|
| Keywords: | boot-failure added; boot removed |
| Owner: | changed from to |
The log tail in the image shows the USB3 controller started but it looks like no devices were found. Perhaps the initial device scan wasn't run for some reason?
comment:3 by , 3 months ago
Today no boot. This Notebook has 2x USB-A 3.1 and 1x USB-C 4.0. USB C ist not used. External mouse in one USB-A - USB Stick in the other one. Switched the ports for mouse and USB Stick - still no boot. Switched again this time the external mouse not connected. --> successful boot.
comment:4 by , 3 months ago
Back to nightly hrev58155. Copy the new BOOTX64.EFI to HAIKU ESP/EFI/BOOT. Reliable booting seems to be back now.
comment:5 by , 3 months ago
If you only updated the beta4 to beta5 on the stick, you might need to copy the efi bootloader indeed.
comment:6 by , 3 months ago
I updated from nightly to beta 5 and now back to nightly. Every time I copied the bootloader.
comment:8 by , 5 weeks ago
I am not a home this week. Will Test at the weekend. Note: since i use the nightlies there are no boot problems.
comment:9 by , 5 weeks ago
DDed hrev58358 on an USB Stick. --> Boots without a problem. Install Haiku from this to another USB stick with 128gb + copy the EFI folder to the ESP partition. --> Boots without a problem.
comment:10 by , 4 weeks ago
Hmm. Can you try changing "serial_debug_output" in the kernel settings file to "false"? Perhaps this is a timing issue affected by serial output somehow.
comment:11 by , 4 weeks ago
DDed Beta 5 on an USB Stick. --> Boots without a problem. Install Haiku from this to another USB stick with 128gb + copy the EFI folder to the ESP partition. --> Boot fails. serial_debug_output" in the kernel settings file was already set to "false". Insert # to this line which did not change the boot fail. Picture of the boot failure enclosed.
by , 4 weeks ago
| Attachment: | bootfailure with serial debug.jpg added |
|---|
comment:13 by , 4 weeks ago
Yes, I cannot boot Haiku from hard disk with this notebook. See Bug #18500.
comment:14 by , 4 weeks ago
It looks like the USB disks are never scanned, probably related to the "returned error No such file or directory".
syslogs attached. The last 4 boots were ok. I did not change anything.