Broadcom 4401 NIC

[paulogeyer]

Hi, this week i've successfully installed haiku in my computer, which is an "Acer Aspire 5630", really nice, it runs fast and pretty stable!

but i've got a problem with my Broadcom 4401 NIC (i've tried the GPL bcm44xx driver), it seems to be loaded, but i can't configure it via DHCP or manually, i'll put some information about my NIC here:

paulo@samsa:~$ lspci |grep Eth
06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
paulo@samsa:~$ lspci -nm|grep 06:01.0
06:01.0 "0200" "14e4" "170c" -r02 "1025" "0090"

i know some C programming, but nothing about driver and OS programming, so i couldn't figure out what's going wrong here

[PieterPanman]

This chip should now be supported by the bfe driver. Please try the latest Haiku. If it doesn't work, please report this. If it does work, please also report that. One issue is still being tracked, see #2998.

[korli]

Please give us feedback.

[axeld]

The original driver has been replaced, there is no feedback.

[brunobratwurst]

My Broadcom Ethernet 4401 BO still wont initialize. But my wireless card a iprowifi3945 works. Maybe there is a driver conflict? I can choose only the wifi driver not the ethernet in the network preferences panel.

[brunobratwurst]

where to upload the syslog to?

Will paste it in here for now: KERN: broadcom440x: init_driver(0x81fd5688) KERN: [broadcom440x] (bfe) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1,0x2) KERN: add_memory_type_range(1812, 0xd2000000, 0x20000, 0) KERN: set MTRRs to: KERN: mtrr: 0: base: 0x3fe90000, size: 0x10000, type: 0 KERN: mtrr: 1: base: 0xc0000000, size: 0x40000000, type: 0 KERN: mtrr: 2: base: 0x4f00000, size: 0x100000, type: 1 KERN: mtrr: 3: base: 0x80000000, size: 0x80000000, type: 1 KERN: [broadcom440x] (bfe) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1,0x6) KERN: if_initname(0x8303c260, bfe, 3) KERN: [broadcom440x] broadcom440x: /dev/net/broadcom440x/0 KERN: [broadcom440x] (bfe) PHY Reset would not complete. KERN: [broadcom440x] (bfe) MII without any PHY! KERN: [broadcom440x] (bfe) PHY Reset would not complete. KERN: remove_memory_type_range(1812, 0xd2000000, 0x20000, 0) KERN: set MTRRs to: KERN: mtrr: 0: base: 0x3fe90000, size: 0x10000, type: 0 KERN: mtrr: 1: base: 0xc0000000, size:KERN: 0x40000000, type: 0 KERN: mtrr: 2: base: 0x4f00000, size: 0x100000, type: 1 KERN: mtrr: 3: base: 0x80000000, size: 0x80000000, type: 1 KERN: etherpci: init_driver init_driver: etherpci not found KERN: iprowifi3945: init_driver(0x812c53c0) KERN: [iprowifi3945] (wpi) Driver Revision 20071127 KERN: [iprowifi3945] (wpi) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1,0x2) KERN: add_memory_type_range(1827, 0xca000000, 0x20000, 0) KERN: set MTRRs to: KERN: mtrr: 0: base: 0x3fe90000, size: 0x10000, type: 0 KERN: mtrr: 1: base: 0xc0000000, size: 0x40000000, type: 0 KERN: mtrr: 2: base: 0x4f00000, size: 0x100000, type: 1 KERN: mtrr: 3: base: 0x80000000, size: 0x80000000, type: 1 KERN: msi_allocate_vectors: allocated 1 vectors starting from 24 KERN: [iprowifi3945] (wpi) bus_alloc_resource(1, [1], 0x0, 0xffffffff, 0x1,0x6) KERN: [iprowifi3945] (wpi) Hardware Revision (0x1) KERN: adding chan 1 (2412MHz) flags=0x2b maxpwr=15 passive=0, offset 2 KERN: adding chan 2 (2417MHz) flags=0x2b maxpwr=15 passive=0, offset 4 KERN: adding chan 3 (2422MHz) flags=0x2b maxpwr=15 passive=0, offset 6 KERN: adding chan 4 (2427MHz) flags=0x2b maxpwr=15 passive=0, offset 8 KERN: adding chan 5 (2432MHz) flags=0x2b maxpwr=15 passive=0, offset 10 KERN: adding chan 6 (2437MHz) flags=0x2b maxpwr=15 passive=0, offset 12 KERN: adding chan 7 (2442MHz) flags=0x2b maxpwr=15 passive=0, offset 14 KERN: adding chan 8 (2447MHz) flags=0x2b maxpwr=15 passive=0, offset 16 KERN: adding chan 9 (2452MHz) flags=0x2b maxpwr=15 passive=0, offset 18 KERN: adding chan 10 (2457MHz) flags=0x2b maxpwr=15 passive=0, offset 20 KERN: adding chan 11 (2462MHz) flags=0x2b maxpwr=15 passive=0, offset 22 KERN: adding chan 12 (2467MHz) flags=0x21 maxpwr=15 passive=1, offset 24 KERN: adding chan 13 (2472MHz) flags=0x21 maxpwr=15 passive=1, offset 26 KERN: adding chan 34 (5170MHz) flags=0x21 maxpwr=15 passive=1, offset 27 KERN: adding chan 36 (5180MHz) flags=0xab maxpwr=15 passive=0, offset 28 KERN: adding chan 38 (5190MHz) flags=0x21 maxpwr=15 passive=1, offset 29 KERN: adding chan 40 (5200MHz) flags=0xab maxpwr=15 passive=0, offset 30 KERN: adding chan 42 (5210MHz) flags=0x21 maxpwr=15 passive=1, offset 31 KERN: adding chan 44 (5220MHz) flags=0xab maxpwr=15 passive=0, offset 32 KERN: adding chan 46 (5230MHz) flags=0x21 maxpwr=15 passive=1, offset 33 KERN: adding chan 48 (5240MHz) flags=0xab maxpwr=15 passive=0, offset 34 KERN: adding chan 52 (5260MHz) flags=0xb1 maxpwr=15 passive=1, offset 35 KERN: adding chan 56 (5280MHz) flags=0xb1 maxpwr=15 passive=1, offset 36 KERN: adding chan 60 (5300MHz) flags=0xb1 maxpwr=15 passive=1, offset 37 KERN: adding chan 64 (5320MHz) flags=0xb1 maxpwr=15 passive=1, offset 38 KERN: adding chan 100 (5500MHz) flags=0xb1 maxpwr=16 passive=1, offset 39 KERN: adding chan 104 (5520MHz) flags=0xb1 maxpwr=16 passive=1, offset 40 KERN: adding chan 108 (5540MHz) flags=0xb1 maxpwr=16 passive=1, offset 41 KERN: adding chan 112 (5560MHz) flags=0xb1 maxpwr=16 passive=1, offset 42 KERN: adding chan 116 (5580MHz) flags=0xb1 maxpwr=16 passive=1, offset 43 KERN: adding chan 120 (5600MHz) flags=0xb1 maxpwr=16 passive=1, offset 44 KERN: adding chan 124 (5620MHz) flags=0xb1 maxpwr=16 passive=1, offset 45 KERN: adding chan 128 (5640MHz) flags=0xb1 maxpwr=16 passive=1, offset 46 KERN: adding chan 132 (5660MHz) flags=0xb1 maxpwr=16 passive=1, offset 47 KERN: adding chan 136 (5680MHz) flags=0xb1 maxpwr=16 passive=1, offset 48 KERN: adding chan 140 (5700MHz) flags=0xb1 maxpwr=16 passive=1, offset 49 KERN: power group 0: chan=1 maxpwr=48 temp=-188 KERN: sample 0: index=13 power=43 KERN: sample 1: index=29 power=30 KERN: sample 2: index=47 power=10 KERN: sample 3: index=58 power=-1 KERN: sample 4: index=77 power=-19 KERN: power group 1: chan=44 maxpwr=52 temp=-192 KERN: sample 0: index=12 power=41 KERN: sample 1: index=19 power=32 KERN: sample 2: index=32 power=18 KERN: sample 3: index=43 power=8 KERN: sample 4: index=77 power=-25 KERN: power group 2: chan=64 maxpwr=50 temp=-191 KERN: sample 0: index=12 power=41 KERN: sample 1: index=20 power=32 KERN: sample 2: index=33 power=19 KERN: sample 3: index=44 power=9 KERN: sample 4: index=77 power=-22 KERN: power group 3: chan=116 maxpwr=48 temp=-189 KERN: sample 0: index=12 power=38 KERN: sample 1: index=20 power=30 KERN: sample 2: index=36 power=14 KERN: sample 3: index=48 power=4 KERN: sample 4: index=77 power=-24 KERN: power group 4: chan=153 maxpwr=45 temp=-188 KERN: sample 0: index=10 power=35 KERN: sample 1: index=20 power=23 KERN: sample 2: index=32 power=11 KERN: sample 3: index=42 power=4 KERN: sample 4: index=77 power=-28 KERN: [iprowifi3945] (wpi) Regulatory Domain: MoW2 KERN: [iprowifi3945] (wpi) Hardware Type: B KERN: [iprowifi3945] (wpi) Hardware Revision: ? KERN: [iprowifi3945] (wpi) SKU does support 802.11a KERN: if_initname(0xcd315ba0, wpi, 3) KERN: [iprowifi3945] iprowifi3945: /dev/net/iprowifi3945/0 KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect autoselect KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect autoselect <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a autoselect KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a autoselect <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/6Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/6Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/9Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/9Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/12Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/12Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/18Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/18Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/24Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/24Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/36Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/36Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/48Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/48Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/54Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/54Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b autoselect KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b autoselect <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/1Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/1Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/2Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/2Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/5.5Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/5.5Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/11Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/11Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g autoselect KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g autoselect <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/1Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/1Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/2Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/2Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/5.5Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/5.5Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/11Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/11Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/6Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/6Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/9Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/9Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/12Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/12Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/18Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/18Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/24Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/24Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/36Mbps KERN: Adding entry for IEEE 802.11 Wireless EtheKERN: rnet mode 11g OFDM/36Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/48Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/48Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/54Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/54Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/6Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/6Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/9Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/9Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/12Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/12Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/18Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/18Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/24Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/24Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/36Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/36Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/48Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/48Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/54Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/54Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/1Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/1Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/2Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/2Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/5.5Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/5.5Mbps <monitor> KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/11Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/11Mbps <monitor> KERN: ifmedia_set: target IEEE 802.11 Wireless Ethernet mode autoselect autoselect KERN: ifmedia_set: setting to IEEE 802.11 Wireless Ethernet mode autoselect autoselect KERN: msi enabled: 0x0081 KERN: [net/iprowifi3945/0] 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps KERN: [net/iprowifi3945/0] 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps KERN: [net/iprowifi3945/0] 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps KERN: if_initname(0xcd3172e0, wlan, 3) KERN: [iprowifi3945] iprowifi3945: /dev/net/iprowifi3945/0 KERN: [net/iprowifi3945/0] ieee80211_node_vattach: init 2 auth 12 run 20 probe 2 KERN: [net/iprowifi3945/0] ieee80211_vap_attach: STA parent wpi flags 0x40040000 flags_ext 0x2 KERN: [net/iprowifi3945/0] ieee80211_alloc_node 0xcdc3d000<00:18:de:75:45:cf> in station table KERN: [net/iprowifi3945/0] [00:18:de:75:45:cf] ieee80211_alloc_node: inact_reload 2 KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect autoselect KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a autoselect KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/6Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/9Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/12Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/18Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/24Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/36Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/48Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/54Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b autoselect KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/1Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/2Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/5.5Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/11Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g autoselect KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/1Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/2Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/5.5Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/11Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/6Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/9Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/12Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/18Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/24Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/36Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/48Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/54Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/6Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/9Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/12Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/18Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/24Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/36Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/48Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/54Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/1Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/2Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/5.5Mbps KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/11Mbps KERN: ifmedia_set: target IEEE 802.11 Wireless Ethernet mode autoselect autoselect KERN: ifmedia_set: setting to IEEE 802.11 Wireless Ethernet mode autoselect autoselect KERN: start_wlan: wlan started. KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/iprowifi3945 KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/pegasus KERN: [33musb_asix:[0m00.07.861:init_driver::ver.0.8.3 KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_asix KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_ecm KERN: bfs: bfs_open_dir:1592: Not a directory KERN: get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/iprowifi3945/0 KERN: ipv4_datalink_init(/dev/net/iprowifi3945/0) KERN: [net/iprowifi3945/0] compat_open(0x2) KERN: [net/iprowifi3945/0] ieee80211_init KERN: [net/iprowifi3945/0] start running, 0 vaps running KERN: [net/iprowifi3945/0] ieee80211_start_locked: up parent wpi KERN: ifmedia_ioctl: no media found for 0x20 KERN: [net/iprowifi3945/0] start running, 1 vaps running KERN: /dev/net/iprowifi3945/0: media change, media 0x200a0 quality 1000 speed 1000000 KERN: register_domain(4, link) KERN: [iprowifi3945] (wpi) timeout resetting Tx ring 1 KERN: [iprowifi3945] (wpi) timeout resetting Tx ring 3 KERN: [iprowifi3945] (wpi) timeout resetting Tx ring 4 KERN: microcode alive notification version 10e02 alive 1 Last message repeated 1 time KERN: [net/iprowifi3945/0] start running, 1 vaps running KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0) KERN: [net/iprowifi3945/0] ieee80211_newstate_cb: INIT -> SCAN arg 0 KERN: wpi_newstate: INIT -> SCAN flags 0x0 KERN: [net/iprowifi3945/0] sta_newstate: INIT -> SCAN (0) KERN: [net/iprowifi3945/0] ieee80211_check_scan: active scan, append KERN: [net/iprowifi3945/0] scan_update_locked: current scanner is <none:none>, switch to <wlan:STA> KERN: [net/iprowifi3945/0] start_scan_locked: active scan, duration 2147483647 mindwell 0 maxdwell 0, desired mode auto, flush KERN: [net/iprowifi3945/0] scan set 1g, 6g, 11g, 7g, 13g, 52a, 56a, 60a, 64a, 36a, 40a, 44a, 48a, 34a, 38a, 42a, 46a, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g, 100a, 104a, 108a, 112a, 116a, 120a, 124a, 128a, 132a, 136a, 140a dwell min 20ms max 0ms KERN: [net/iprowifi3945/0] scan_task: chan 1b -> 1g [active, dwell min 20ms max 0ms] KERN: [00:23:08:b0:29:68] new probe_resp on chan 1 (bss chan 1) "BeBox-B02910" rssi 45 KERN: [00:23:08:b0:29:68] capsKERN: 0x411 bintval 100 erp 0x104 country [DE 1-13,16] KERN: [net/iprowifi3945/0] scan_task: chan 1g -> 6g [active, dwell min 20ms max 0ms] KERN: [net/iprowifi3945/0] scan_task: chan 6g -> 11g [active, dwell min 20ms max 0ms] KERN: [net/iprowifi3945/0] scan_task: chan 11g -> 7g [active, dwell min 20ms max 0ms] KERN: [net/iprowifi3945/0] scan_task: chan 7g -> 13g [passive, dwell min 20ms max 0ms] KERN: bfs: Remove:1741: No such file or directory KERN: bfs: Could not find value in index "size"! KERN: bfs: Remove:1741: No such file or directory KERN: bfs: Could not find value in index "last_modified"! KERN: /dev/net/iprowifi3945/0: media change, media 0x300a0 quality 1000 speed 1000000 KERN: [net/iprowifi3945/0] ieee80211_init KERN: [net/iprowifi3945/0] start running, 1 vaps running KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: SCAN -> SCAN (nrunning 0 nscanning 0) KERN: [net/iprowifi3945/0] ieee80211_init KERN: [net/iprowifi3945/0] start running, 1 vaps running KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: SCAN -> SCAN (nrunning 0 nscanning 0) KERN: emuxki: init_hardware() KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/midi/usb_midi KERN: ps2_hid: init_hardware KERN: ps2_hid: init_driver KERN: ps2: active multiplexing v1.1 enabled DAEMON 'DHCP': DHCP timeout shift: 4 secs (try 0) KERN: ps2_hid: publish_devices KERN: ps2_hid: uninit_driver KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/ps2_hid KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/usb_hid KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/wacom KERN: bfs: bfs_open_dir:1592: Not a directory KERN: ps2: reset failed KERN: ps2: devfs_publish_device input/mouse/ps2/0, status = 0xffffffff KERN: bfs: InitCheck:311: Bad data KERN: bfs: inode at 1317694 is already deleted! KERN: bfs: bfs_lookup:594: Bad data KERN: bfs: InitCheck:311: Bad data KERN: bfs: KERN: inode at 1317694 is already deleted! KERN: bfs: InitCheck:311: Bad data KERN: bfs: inode at 1317694 is already deleted! KERN: bfs: bfs_create_index:2053: File or Directory already exists KERN: Last message repeated 14 times. KERN: [net/iprowifi3945/0] scan_task: chan 13g -> 52a [passive, dwell min 20ms max 0ms] KERN: bfs: bfs_create_index:2053: File or Directory already exists USER 'liblocale.so'[118]: Found : plaintext priority: 99 USER 'liblocale.so'[118]: Found : zeta priority: 5 USER 'liblocale.so'[113]: Found : plaintext priority: 99 USER 'liblocale.so'[113]: Found : zeta priority: 5 KERN: bfs: bfs_create_index:2053: File or Directory already exists KERN: /dev/net/iprowifi3945/0: media change, media 0x100a0 quality 1000 speed 1000000 KERN: ps2: reset failed KERN: ps2: devfs_publish_device input/mouse/ps2/1, status = 0xffffffff KERN: cx23882: init_hardware() KERN: ahci: ahci_supports_device Last message repeated 1 time KERN: firewire: fw_module_init

[korli]

Could you please check whether this bug report is still valid?