Opened 17 years ago

Last modified 13 years ago

#2277 closed bug

Broadcom 4401 NIC — at Version 7

Reported by: paulogeyer Owned by: axeld
Priority: normal Milestone: R1
Component: Drivers/Network/broadcom440x Version: R1/alpha2
Keywords: Cc:
Blocked By: Blocking:
Platform: All

Description (last modified by diver)

Hi, this week i've successfully installed haiku in my computer, which is an "Acer Aspire 5630", really nice, it runs fast and pretty stable!

but i've got a problem with my Broadcom 4401 NIC (i've tried the GPL bcm44xx driver), it seems to be loaded, but i can't configure it via DHCP or manually, i'll put some information about my NIC here:

paulo@samsa:~$ lspci |grep Eth
06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
paulo@samsa:~$ lspci -nm|grep 06:01.0
06:01.0 "0200" "14e4" "170c" -r02 "1025" "0090"

i know some C programming, but nothing about driver and OS programming, so i couldn't figure out what's going wrong here

Change History (7)

comment:1 by PieterPanman, 16 years ago

This chip should now be supported by the bfe driver. Please try the latest Haiku. If it doesn't work, please report this. If it does work, please also report that. One issue is still being tracked, see #2998.

comment:2 by korli, 16 years ago

Please give us feedback.

comment:3 by axeld, 16 years ago

Resolution: invalid
Status: newclosed

The original driver has been replaced, there is no feedback.

comment:4 by brunobratwurst, 15 years ago

Resolution: invalid
Status: closedreopened
Version: R1/pre-alpha1R1/alpha2

My Broadcom Ethernet 4401 BO still wont initialize. But my wireless card a iprowifi3945 works. Maybe there is a driver conflict? I can choose only the wifi driver not the ethernet in the network preferences panel.

comment:5 by brunobratwurst, 15 years ago

where to upload the syslog to?

Will paste it in here for now:

KERN: broadcom440x: init_driver(0x81fd5688)
KERN: [broadcom440x] (bfe) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1,0x2)
KERN: add_memory_type_range(1812, 0xd2000000, 0x20000, 0)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x3fe90000, size:    0x10000, type: 0
KERN:   mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  2: base:  0x4f00000, size:   0x100000, type: 1
KERN:   mtrr:  3: base: 0x80000000, size: 0x80000000, type: 1
KERN: [broadcom440x] (bfe) bus_alloc_resource(1, [0], 0x0, 0xffffffff, 0x1,0x6)
KERN: if_initname(0x8303c260, bfe, 3)
KERN: [broadcom440x] broadcom440x: /dev/net/broadcom440x/0
KERN: [broadcom440x] (bfe) PHY Reset would not complete.
KERN: [broadcom440x] (bfe) MII without any PHY!
KERN: [broadcom440x] (bfe) PHY Reset would not complete.
KERN: remove_memory_type_range(1812, 0xd2000000, 0x20000, 0)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x3fe90000, size:    0x10000, type: 0
KERN:   mtrr:  1: base: 0xc0000000, size:KERN:  0x40000000, type: 0
KERN:   mtrr:  2: base:  0x4f00000, size:   0x100000, type: 1
KERN:   mtrr:  3: base: 0x80000000, size: 0x80000000, type: 1
KERN: etherpci: init_driver init_driver: etherpci not found
KERN: iprowifi3945: init_driver(0x812c53c0)
KERN: [iprowifi3945] (wpi) Driver Revision 20071127
KERN: [iprowifi3945] (wpi) bus_alloc_resource(3, [16], 0x0, 0xffffffff, 0x1,0x2)
KERN: add_memory_type_range(1827, 0xca000000, 0x20000, 0)
KERN: set MTRRs to:
KERN:   mtrr:  0: base: 0x3fe90000, size:    0x10000, type: 0
KERN:   mtrr:  1: base: 0xc0000000, size: 0x40000000, type: 0
KERN:   mtrr:  2: base:  0x4f00000, size:   0x100000, type: 1
KERN:   mtrr:  3: base: 0x80000000, size: 0x80000000, type: 1
KERN: msi_allocate_vectors: allocated 1 vectors starting from 24
KERN: [iprowifi3945] (wpi) bus_alloc_resource(1, [1], 0x0, 0xffffffff, 0x1,0x6)
KERN: [iprowifi3945] (wpi) Hardware Revision (0x1)
KERN: adding chan 1 (2412MHz) flags=0x2b maxpwr=15 passive=0, offset 2
KERN: adding chan 2 (2417MHz) flags=0x2b maxpwr=15 passive=0, offset 4
KERN: adding chan 3 (2422MHz) flags=0x2b maxpwr=15 passive=0, offset 6
KERN: adding chan 4 (2427MHz) flags=0x2b maxpwr=15 passive=0, offset 8
KERN: adding chan 5 (2432MHz) flags=0x2b maxpwr=15 passive=0, offset 10
KERN: adding chan 6 (2437MHz) flags=0x2b maxpwr=15 passive=0, offset 12
KERN: adding chan 7 (2442MHz) flags=0x2b maxpwr=15 passive=0, offset 14
KERN: adding chan 8 (2447MHz) flags=0x2b maxpwr=15 passive=0, offset 16
KERN: adding chan 9 (2452MHz) flags=0x2b maxpwr=15 passive=0, offset 18
KERN: adding chan 10 (2457MHz) flags=0x2b maxpwr=15 passive=0, offset 20
KERN: adding chan 11 (2462MHz) flags=0x2b maxpwr=15 passive=0, offset 22
KERN: adding chan 12 (2467MHz) flags=0x21 maxpwr=15 passive=1, offset 24
KERN: adding chan 13 (2472MHz) flags=0x21 maxpwr=15 passive=1, offset 26
KERN: adding chan 34 (5170MHz) flags=0x21 maxpwr=15 passive=1, offset 27
KERN: adding chan 36 (5180MHz) flags=0xab maxpwr=15 passive=0, offset 28
KERN: adding chan 38 (5190MHz) flags=0x21 maxpwr=15 passive=1, offset 29
KERN: adding chan 40 (5200MHz) flags=0xab maxpwr=15 passive=0, offset 30
KERN: adding chan 42 (5210MHz) flags=0x21 maxpwr=15 passive=1, offset 31
KERN: adding chan 44 (5220MHz) flags=0xab maxpwr=15 passive=0, offset 32
KERN: adding chan 46 (5230MHz) flags=0x21 maxpwr=15 passive=1, offset 33
KERN: adding chan 48 (5240MHz) flags=0xab maxpwr=15 passive=0, offset 34
KERN: adding chan 52 (5260MHz) flags=0xb1 maxpwr=15 passive=1, offset 35
KERN: adding chan 56 (5280MHz) flags=0xb1 maxpwr=15 passive=1, offset 36
KERN: adding chan 60 (5300MHz) flags=0xb1 maxpwr=15 passive=1, offset 37
KERN: adding chan 64 (5320MHz) flags=0xb1 maxpwr=15 passive=1, offset 38
KERN: adding chan 100 (5500MHz) flags=0xb1 maxpwr=16 passive=1, offset 39
KERN: adding chan 104 (5520MHz) flags=0xb1 maxpwr=16 passive=1, offset 40
KERN: adding chan 108 (5540MHz) flags=0xb1 maxpwr=16 passive=1, offset 41
KERN: adding chan 112 (5560MHz) flags=0xb1 maxpwr=16 passive=1, offset 42
KERN: adding chan 116 (5580MHz) flags=0xb1 maxpwr=16 passive=1, offset 43
KERN: adding chan 120 (5600MHz) flags=0xb1 maxpwr=16 passive=1, offset 44
KERN: adding chan 124 (5620MHz) flags=0xb1 maxpwr=16 passive=1, offset 45
KERN: adding chan 128 (5640MHz) flags=0xb1 maxpwr=16 passive=1, offset 46
KERN: adding chan 132 (5660MHz) flags=0xb1 maxpwr=16 passive=1, offset 47
KERN: adding chan 136 (5680MHz) flags=0xb1 maxpwr=16 passive=1, offset 48
KERN: adding chan 140 (5700MHz) flags=0xb1 maxpwr=16 passive=1, offset 49
KERN: power group 0: chan=1 maxpwr=48 temp=-188
KERN: 	sample 0: index=13 power=43
KERN: 	sample 1: index=29 power=30
KERN: 	sample 2: index=47 power=10
KERN: 	sample 3: index=58 power=-1
KERN: 	sample 4: index=77 power=-19
KERN: power group 1: chan=44 maxpwr=52 temp=-192
KERN: 	sample 0: index=12 power=41
KERN: 	sample 1: index=19 power=32
KERN: 	sample 2: index=32 power=18
KERN: 	sample 3: index=43 power=8
KERN: 	sample 4: index=77 power=-25
KERN: power group 2: chan=64 maxpwr=50 temp=-191
KERN: 	sample 0: index=12 power=41
KERN: 	sample 1: index=20 power=32
KERN: 	sample 2: index=33 power=19
KERN: 	sample 3: index=44 power=9
KERN: 	sample 4: index=77 power=-22
KERN: power group 3: chan=116 maxpwr=48 temp=-189
KERN: 	sample 0: index=12 power=38
KERN: 	sample 1: index=20 power=30
KERN: 	sample 2: index=36 power=14
KERN: 	sample 3: index=48 power=4
KERN: 	sample 4: index=77 power=-24
KERN: power group 4: chan=153 maxpwr=45 temp=-188
KERN: 	sample 0: index=10 power=35
KERN: 	sample 1: index=20 power=23
KERN: 	sample 2: index=32 power=11
KERN: 	sample 3: index=42 power=4
KERN: 	sample 4: index=77 power=-28
KERN: [iprowifi3945] (wpi) Regulatory Domain: MoW2
KERN: [iprowifi3945] (wpi) Hardware Type: B
KERN: [iprowifi3945] (wpi) Hardware Revision: ?
KERN: [iprowifi3945] (wpi) SKU does support 802.11a
KERN: if_initname(0xcd315ba0, wpi, 3)
KERN: [iprowifi3945] iprowifi3945: /dev/net/iprowifi3945/0
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect autoselect
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect autoselect <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a autoselect
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a autoselect <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/6Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/6Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/9Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/9Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/12Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/12Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/18Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/18Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/24Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/24Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/36Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/36Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/48Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/48Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/54Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/54Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b autoselect
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b autoselect <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/1Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/1Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/2Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/2Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/5.5Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/5.5Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/11Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/11Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g autoselect
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g autoselect <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/1Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/1Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/2Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/2Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/5.5Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/5.5Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/11Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/11Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/6Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/6Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/9Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/9Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/12Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/12Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/18Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/18Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/24Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/24Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/36Mbps
KERN: Adding entry for IEEE 802.11 Wireless EtheKERN: rnet mode 11g OFDM/36Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/48Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/48Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/54Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/54Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/6Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/6Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/9Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/9Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/12Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/12Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/18Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/18Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/24Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/24Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/36Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/36Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/48Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/48Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/54Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/54Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/1Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/1Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/2Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/2Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/5.5Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/5.5Mbps <monitor>
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/11Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/11Mbps <monitor>
KERN: ifmedia_set: target IEEE 802.11 Wireless Ethernet mode autoselect autoselect
KERN: ifmedia_set: setting to IEEE 802.11 Wireless Ethernet mode autoselect autoselect
KERN: msi enabled: 0x0081
KERN: [net/iprowifi3945/0] 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
KERN: [net/iprowifi3945/0] 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
KERN: [net/iprowifi3945/0] 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
KERN: if_initname(0xcd3172e0, wlan, 3)
KERN: [iprowifi3945] iprowifi3945: /dev/net/iprowifi3945/0
KERN: [net/iprowifi3945/0] ieee80211_node_vattach: init 2 auth 12 run 20 probe 2
KERN: [net/iprowifi3945/0] ieee80211_vap_attach: STA parent wpi flags 0x40040000 flags_ext 0x2
KERN: [net/iprowifi3945/0] ieee80211_alloc_node 0xcdc3d000<00:18:de:75:45:cf> in station table
KERN: [net/iprowifi3945/0] [00:18:de:75:45:cf] ieee80211_alloc_node: inact_reload 2
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect autoselect
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a autoselect
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/6Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/9Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/12Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/18Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/24Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/36Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/48Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11a OFDM/54Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b autoselect
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/1Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/2Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/5.5Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11b DS/11Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g autoselect
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/1Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/2Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/5.5Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g DS/11Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/6Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/9Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/12Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/18Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/24Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/36Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/48Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode 11g OFDM/54Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/6Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/9Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/12Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/18Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/24Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/36Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/48Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect OFDM/54Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/1Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/2Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/5.5Mbps
KERN: Adding entry for IEEE 802.11 Wireless Ethernet mode autoselect DS/11Mbps
KERN: ifmedia_set: target IEEE 802.11 Wireless Ethernet mode autoselect autoselect
KERN: ifmedia_set: setting to IEEE 802.11 Wireless Ethernet mode autoselect autoselect
KERN: start_wlan: wlan started.
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/iprowifi3945
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/pegasus
KERN: [33musb_asix:[0m00.07.861:init_driver::ver.0.8.3
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_asix
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/net/usb_ecm
KERN: bfs: bfs_open_dir:1592: Not a directory
KERN: get_device_interface: ask "network/devices/ethernet/v1" for /dev/net/iprowifi3945/0
KERN: ipv4_datalink_init(/dev/net/iprowifi3945/0)
KERN: [net/iprowifi3945/0] compat_open(0x2)
KERN: [net/iprowifi3945/0] ieee80211_init
KERN: [net/iprowifi3945/0] start running, 0 vaps running
KERN: [net/iprowifi3945/0] ieee80211_start_locked: up parent wpi
KERN: ifmedia_ioctl: no media found for 0x20
KERN: [net/iprowifi3945/0] start running, 1 vaps running
KERN: /dev/net/iprowifi3945/0: media change, media 0x200a0 quality 1000 speed 1000000
KERN: register_domain(4, link)
KERN: [iprowifi3945] (wpi) timeout resetting Tx ring 1
KERN: [iprowifi3945] (wpi) timeout resetting Tx ring 3
KERN: [iprowifi3945] (wpi) timeout resetting Tx ring 4
KERN: microcode alive notification version 10e02 alive 1
Last message repeated 1 time
KERN: [net/iprowifi3945/0] start running, 1 vaps running
KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0)
KERN: [net/iprowifi3945/0] ieee80211_newstate_cb: INIT -> SCAN arg 0
KERN: wpi_newstate: INIT -> SCAN flags 0x0
KERN: [net/iprowifi3945/0] sta_newstate: INIT -> SCAN (0)
KERN: [net/iprowifi3945/0] ieee80211_check_scan: active scan, append
KERN: [net/iprowifi3945/0] scan_update_locked: current scanner is <none:none>, switch to <wlan:STA>
KERN: [net/iprowifi3945/0] start_scan_locked: active scan, duration 2147483647 mindwell 0 maxdwell 0, desired mode auto, flush
KERN: [net/iprowifi3945/0] scan set 1g, 6g, 11g, 7g, 13g, 52a, 56a, 60a, 64a, 36a, 40a, 44a, 48a, 34a, 38a, 42a, 46a, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g, 100a, 104a, 108a, 112a, 116a, 120a, 124a, 128a, 132a, 136a, 140a dwell min 20ms max 0ms
KERN: [net/iprowifi3945/0] scan_task: chan   1b ->   1g [active, dwell min 20ms max 0ms]
KERN: [00:23:08:b0:29:68] new probe_resp on chan 1 (bss chan 1) "BeBox-B02910" rssi 45
KERN: [00:23:08:b0:29:68] capsKERN:  0x411 bintval 100 erp 0x104 country [DE  1-13,16]
KERN: [net/iprowifi3945/0] scan_task: chan   1g ->   6g [active, dwell min 20ms max 0ms]
KERN: [net/iprowifi3945/0] scan_task: chan   6g ->  11g [active, dwell min 20ms max 0ms]
KERN: [net/iprowifi3945/0] scan_task: chan  11g ->   7g [active, dwell min 20ms max 0ms]
KERN: [net/iprowifi3945/0] scan_task: chan   7g ->  13g [passive, dwell min 20ms max 0ms]
KERN: bfs: Remove:1741: No such file or directory
KERN: bfs: Could not find value in index "size"!
KERN: bfs: Remove:1741: No such file or directory
KERN: bfs: Could not find value in index "last_modified"!
KERN: /dev/net/iprowifi3945/0: media change, media 0x300a0 quality 1000 speed 1000000
KERN: [net/iprowifi3945/0] ieee80211_init
KERN: [net/iprowifi3945/0] start running, 1 vaps running
KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: SCAN -> SCAN (nrunning 0 nscanning 0)
KERN: [net/iprowifi3945/0] ieee80211_init
KERN: [net/iprowifi3945/0] start running, 1 vaps running
KERN: [net/iprowifi3945/0] ieee80211_new_state_locked: SCAN -> SCAN (nrunning 0 nscanning 0)
KERN: emuxki: init_hardware()
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/midi/usb_midi
KERN: ps2_hid: init_hardware
KERN: ps2_hid: init_driver
KERN: ps2: active multiplexing v1.1 enabled
DAEMON 'DHCP': DHCP timeout shift: 4 secs (try 0)
KERN: ps2_hid: publish_devices
KERN: ps2_hid: uninit_driver
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/ps2_hid
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/usb_hid
KERN: loaded driver /boot/system/add-ons/kernel/drivers/dev/input/wacom
KERN: bfs: bfs_open_dir:1592: Not a directory
KERN: ps2: reset failed
KERN: ps2: devfs_publish_device input/mouse/ps2/0, status = 0xffffffff
KERN: bfs: InitCheck:311: Bad data
KERN: bfs: inode at 1317694 is already deleted!
KERN: bfs: bfs_lookup:594: Bad data
KERN: bfs: InitCheck:311: Bad data
KERN: bfs: KERN: inode at 1317694 is already deleted!
KERN: bfs: InitCheck:311: Bad data
KERN: bfs: inode at 1317694 is already deleted!
KERN: bfs: bfs_create_index:2053: File or Directory already exists
KERN: Last message repeated 14 times.
KERN: [net/iprowifi3945/0] scan_task: chan  13g ->  52a [passive, dwell min 20ms max 0ms]
KERN: bfs: bfs_create_index:2053: File or Directory already exists
USER 'liblocale.so'[118]: Found : plaintext priority: 99
USER 'liblocale.so'[118]: Found : zeta priority: 5
USER 'liblocale.so'[113]: Found : plaintext priority: 99
USER 'liblocale.so'[113]: Found : zeta priority: 5
KERN: bfs: bfs_create_index:2053: File or Directory already exists
KERN: /dev/net/iprowifi3945/0: media change, media 0x100a0 quality 1000 speed 1000000
KERN: ps2: reset failed
KERN: ps2: devfs_publish_device input/mouse/ps2/1, status = 0xffffffff
KERN: cx23882: init_hardware()
KERN: ahci: ahci_supports_device
Last message repeated 1 time
KERN: firewire: fw_module_init
Last edited 13 years ago by diver (previous) (diff)

comment:6 by korli, 14 years ago

Could you please check whether this bug report is still valid?

comment:7 by diver, 13 years ago

Component: Network & InternetDrivers/Network/broadcom440x
Description: modified (diff)
Platform: x86All
Note: See TracTickets for help on using tickets.