#4460 closed bug (fixed)
Auich causes media_addon_server to use 100% CPU — at Version 4
Reported by: | Joshua | Owned by: | korli |
---|---|---|---|
Priority: | normal | Milestone: | R1 |
Component: | Drivers/Audio/auich | Version: | R1/pre-alpha1 |
Keywords: | Cc: | ||
Blocked By: | Blocking: | ||
Platform: | x86 |
Description (last modified by )
System: hrev32662
The media_addon_server is constantly using 99,9–100% of the CPU.
ints output in the KDL:
int 14, enabled 1, handled 2201, unhandled 2202
ata_adapter:ata_adapter_inthand (0x805d79ac), data 0x80fc5000
Syslog excerpt:
KERN: auich: init_hardware() KERN: auich: init_driver() KERN: auich: auich_setup(0x838d9c00) KERN: auich: audio/hmulti/auich/1 deviceid = 0x266e chiprev = 3 model = 248 enhanced at 0 KERN: auich: PCI command before: 0 KERN: auich: PCI command after: 2 KERN: auich: codec attach KERN: codec reset KERN: auich: codec semaphore timed out! KERN: auich: last read/write registers: 0/0
The last two lines are permanently reapeated (with different register values). The whole syslog file is attached.
Change History (5)
by , 15 years ago
comment:2 by , 15 years ago
Could you please try with a revision at least 33347 ? Clearly the driver initialization should now fail because the configured interrupt (0xff) is not valid. As the codec errors comes before installing the interrupt handler, I'm now wondering if this installation should better happen before cold resetting (as noticed at BG on Daniel's laptop).
comment:3 by , 14 years ago
Resolution: | → fixed |
---|---|
Status: | new → closed |
Please try again with hrev39310 or newer. It should not help with the sound given the non configured device, but avoid troubles booting.
comment:4 by , 13 years ago
Component: | Drivers/Audio → Drivers/Audio/AUICH |
---|---|
Description: | modified (diff) |
Syslog